We pass struct dw_dma_chip to dw_dma_probe() anyway, thus we may use it to
pass a platform data as well.
While here, constify the source of the platform data.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The mcasp davinci_mcasp_set_dai_fmt function was overriding ahclkx
input/output status that had already been set by the
davinci_mcasp_set_sysclk function. This commit removes clearing
of the ahclkx input/output status from davinci_mcasp_set_dai_fmt.
Signed-off-by: Jim Lodes <jim.lodes@garmin.com>
Signed-off-by: J.D. Schroeder <jay.schroeder@garmin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Phoenix Audio MT202pcs (1de7:0114) and MT202exe (1de7:0013) need the
same workaround as TMX320 for avoiding the firmware bug. It fixes the
frequent error about the sample rate inquiries and the slow device
probe as consequence.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117321
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The CCSR_SSI_SOR is a register that clears the TX and/or the RX fifo
on the i.MX SSI port. The fsl_ssi_trigger writes this register in
order to clear the fifo at trigger time.
However, since the CCSR_SSI_SOR register is not in the volatile list,
the caching mechanism prevented the register write in the trigger
function. This caused the fifo to not be cleared (because the value
was unchanged from the last time the register was written), and thus
causes the channels in both TDM or simple I2S mode to slip and be in
the wrong time slots on SSI restart.
This has gone unnoticed for so long because with simple stereo mode,
the consequence is that left and right are swapped, which isn't that
noticeable. However, it's catestrophic in some systems that
require the channels to be in the right slots.
Signed-off-by: Caleb Crome <caleb@crome.org>
Suggested-by: Arnaud Mouiche <arnaud.mouiche@invoxia.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are many USB audio devices with buggy firmware that don't react
with the sample rate reading properly. This often results in the
flood of error messages and slowing down the operation.
The sample rate read back is basically only for confirming the sample
rate setup, and it's not critically important. As a compromise, in
this patch, we stop the sample rate read back once when the device
gives errors more than tolerance (twice, as of now). This should
improve most of error cases while we still can catch the firmware
bugginess.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Default channel map is set for 2 channels. Fix the channel map
based on runtime params to support multichannel.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Channel max is changed to 8 from stereo to support multichannel
capability for HDMI devices.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
With this patch, chmap controls are created and user space can
set the channel map.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
HDMI registers channel map controls per PCM. As PCMs are not
registered during dai_link init callback, store the pcm ids and
codec DAIs during this init callback.
Register for late probe and call the jack_init API which also
registers channel map in the late probe callback handler.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
HDMI registers channel map controls per PCM. As PCMs are not
registered during dai_link init callback, store the pcm ids and
codec DAIs during this init callback.
Register for late probe and call the jack_init API which also
registers channel map in the late probe callback handler.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
HDMI registers channel map controls per PCM. As PCMs are not
registered during dai_link init callback, store the pcm ids and
codec DAIs during this init callback.
Register for late probe and call the jack_init API which also
registers channel map in the late probe callback handler.
The patch following the machine driver changes adds the channel
map control in the hdac_hdmi codec driver.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To support multichannel hdac hdmi driver registers with HDA
channel map framework. Channel count and channel slot verbs are
programmed by using the chmap helpers/ops. The channel
allocation is then programmed in the audio infoframe as per CEA
spec.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch parses ELD speaker allocation data block to find
sink's chmap capability.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This helper is copied from legacy hda driver.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd_mod_call is counting its calling count to avoid unbalanced
function pair calling for error cases (ex init <-> quit).
SSI parent is now controlled as "mod" on current rsnd driver. Because of
this reason, SSI .remove function will be called twice if it was used as
SSI parent when user tried unbind. But probe/remove pair were not
counted. This patch counts probe/remove functions to avoid it.
Special thans Hiep
Reported-by: Hiep Cao Minh <cm-hiep@jinso.co.jp>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The bcm2835-i2s driver already has support for the S16_LE format but
that format hasn't been made available because dmaengine_pcm didn't
support packed data transfers.
bcm2835-i2s needs 16-bit left+right channel data to be packed into
a 32-bit word, the FIFO register is 32-bit only and doesn't support
16-bit access.
Now that dmaengine_pcm supports packed transfers the format can
be made available by setting the SND_DMAENGINE_PCM_DAI_FLAG_PACK flag.
No further configuration is necessary:
- snd_dmaengine_dai_dma_data.addr_width is already set to
DMA_SLAVE_BUSWIDTH_4_BYTES to force 32-bit DMA transfers
- dmaengine_pcm will pick up the S16_LE format from the DAI
configuration and make it available since it's no longer
masked out due to the PACK flag.
- there are no further corner cases to catch in hw_params,
since the channel count is fixed at 2 we always have two
16-bit stereo samples that can be transferred via 32-bit DMA
Signed-off-by: Matthias Reichl <hias@horus.com>
Tested-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
dmaengine_pcm currently only supports setups where FIFO reads/writes
correspond to exactly one sample, eg 16-bit sample data is transferred
via 16-bit FIFO accesses, 32-bit data via 32-bit accesses.
This patch adds support for setups with fixed width FIFOs where
multiple samples are packed into a larger word.
For example setups with a 32-bit wide FIFO register that expect
16-bit sample transfers to be done with the left+right sample data
packed into a 32-bit word.
Support for packed transfers is controlled via the
SND_DMAENGINE_PCM_DAI_FLAG_PACK flag in snd_dmaengine_dai_dma_data.flags
If this flag is set dmaengine_pcm doesn't put any restriction on the
supported formats and sets the DMA transfer width to undefined.
This means control over the constraints is now transferred to the DAI
driver and it's responsible to provide proper configuration and
check for possible corner cases that aren't handled by the ALSA core.
Signed-off-by: Matthias Reichl <hias@horus.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
If size mismatch of manifest, ABI headers or elements is found, stop
parsing topology info and return the error.
New fields may be append to the tail of ABI objects which will cause
object size to increase. If user space and kernel use different versions
of ABI, size mismatch will be detected here.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Stop loading topology info if error happens when creating a widget.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Texas Instruments TAS5720L/M device is a high-efficiency mono
Class-D audio power amplifier optimized for high transient power
capability to use the dynamic power headroom of small loudspeakers.
Its digital time division multiplexed (TDM) interface enables up to
16 devices to share the same bus.
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a fairly large collection of fixes but almost all driver
specific ones, especially to the new Intel drivers which have had a lot
of recent development. The one core fix is a change to the debugfs code
to avoid crashes in some relatively unusual configurations.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXINZtAAoJECTWi3JdVIfQ+BwH/1eLqMfCSZM9nsDr1QMvOCDP
SO4ZoWqvYplBcS8pYKbJmqtuo8jMxT3VIQF+b5hPAVhgpLwMmy9qeFtatqCQ2WDC
GfCqW8LSKtrzwUwmoRrtHx7vfBLP1/z78F8ORQzwhrplTCBhvPLbUOrV51EFj6tf
Dfo2tW0uxww9iCZduYu4LadOhFOfuw+5shUrJk5A5f975Zbdgyke4CbRnlbDPXLq
d4i7bNfiISkSJiKMpdZFeiOQCd0+uXHh2WkMtVYSGVTA2Kf7d7HtX+JpEFFmaJgJ
8CndjgNJ1ZXtMHl1pMYmNqKJ5mEgmVtbGGJWY4QmQBva0EfQ+vLZt78BG3qvJwk=
=SXH2
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.6
This is a fairly large collection of fixes but almost all driver
specific ones, especially to the new Intel drivers which have had a lot
of recent development. The one core fix is a change to the debugfs code
to avoid crashes in some relatively unusual configurations.
Add a function to delete and free the contents of the alg_regions list.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Ensure that the wm_adsp driver cleans up when the codec driver
is removed.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch adds a wm_adsp2_remove() function to ensure that memory
is freed when the driver is unloaded or shut down.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The bits in the ARIZONA_CLOCK_CONTROL register only respond to writes of
a '1', a write of '0' is ignored. So there's no need to use update_bits.
We can do a simple write to set bits.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Initialize the dma_slave_config for PCM DMA transfers,
instead of leaving it uninitialized. Keeps previous data on
the stack from giving us invalid values in uninitialized
members of the config structure.
Signed-off-by: Jim Lodes <jim.lodes@garmin.com>
Signed-off-by: J.D. Schroeder <jay.schroeder@garmin.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().
Cc: Bard Liao <bardliao@realtek.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Because LRCK of TDM use High to Low as default setting, this patch
changes the TDM setting to inverse LRCK.
Signed-off-by: PC Liao <pc.liao@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
RT298_CBJ_CTRL1(0x4f) bit 10 is needed for headset capture. It
will be turned off when "VREF" widget is on and be turned on when
bias level is ON. It is odd. And if "VREF" is turned on in bias
level is ON, RT298_CBJ_CTRL1(0x4f) bit 10 will be turned off.
This patch move the bit control from rt298_set_bias_level and
rt298_vref_event to rt298_jack_detect. So it will be turned on
once a jack is plugged in.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rt298 need to reset AD filter and the ADC settings will take effort.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The recent bug report suggests that BCLK setup for i915 HSW/BDW needs
to be updated at each HDMI hotplug, not only at initialization and
resume. That is, we need to update HSW_EM4 and HSW_EM5 registers at
ELD notification, too. Otherwise the HDMI audio may be out of sync
and played in a wrong pitch.
However, the HDA codec driver has no access to the controller
registers, and currently the code managing these registers is in
hda_intel.c, i.e. local to the controller driver. For allowing the
explicit BCLK update from the codec driver, as in this patch, the
former haswell_set_bclk() in hda_intel.c is moved to hdac_i915.c and
exposed as snd_hdac_i915_set_bclk(). This is called from both the HDA
controller driver and intel_pin_eld_notify() in HDMI codec driver.
Along with this change, snd_hdac_get_display_clk() gets dropped as
it's no longer used.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91410
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes audio output on a ThinkPad X260, when using Lenovo CES 2013
docking station series (basic, pro, ultra).
Signed-off-by: Conrad Kostecki <ck+linuxkernel@bl4ckb0x.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
au88x0 hardware seems returning the current pointer at the buffer
boundary instead of going back to zero. This results in spewing
warnings from PCM core.
This patch corrects the return value from the pointer callback within
the proper value range, just returning zero if the position is equal
or above the buffer size.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch tries to address the still remaining issues in ALSA hrtimer
driver:
- Spurious use-after-free was detected in hrtimer callback
- Incorrect rescheduling due to delayed start
- WARN_ON() is triggered in hrtimer_forward() invoked in hrtimer
callback
The first issue happens only when the new timer is scheduled even
while hrtimer is being closed. It's related with the second and third
items; since ALSA timer core invokes hw.start callback during hrtimer
interrupt, this may result in the explicit call of hrtimer_start().
Also, the similar problem is seen for the stop; ALSA timer core
invokes hw.stop callback even in the hrtimer handler, too. Since we
must not call the synced hrtimer_cancel() in such a context, it's just
a hrtimer_try_to_cancel() call that doesn't properly work.
Another culprit of the second and third items is the call of
hrtimer_forward_now() before snd_timer_interrupt(). The timer->stick
value may change during snd_timer_interrupt() call, but this
possibility is ignored completely.
For covering these subtle and messy issues, the following changes have
been done in this patch:
- A new flag, in_callback, is introduced in the private data to
indicate that the hrtimer handler is being processed.
- Both start and stop callbacks skip when called from (during)
in_callback flag.
- The hrtimer handler returns properly HRTIMER_RESTART and NORESTART
depending on the running state now.
- The hrtimer handler reprograms the expiry properly after
snd_timer_interrupt() call, instead of before.
- The close callback clears running flag and sets in_callback flag
to block any further start/stop calls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We only need to enable the clock if we are a clock master.
Code ported from bcm2708-i2s driver in Raspberry Pi tree.
Original work by Zoltan Szenczi.
Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds 24 bit support to the I2S driver of the BCM2835
Code ported from bcm2708-i2s driver in Raspberry Pi tree.
Signed-off-by: Florian Meier <florian.meier@koalo.de>
Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are no users of rtctimer left. Remove its code as this is the
in-kernel user of the legacy PC RTC driver that will hopefully be removed
at some point.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When some tascam units are connected sequentially, userspace
applications are involved at bus-reset state on IEEE 1394 bus. In the
state, any communications can be canceled. Therefore, sound card
registration should be delayed till the bus gets calm.
This commit achieves it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Again a relatively calm week without surprise: most of fixes are about
HD-audio, including fixes for Cirrus codec regression and a race over
regmap access. Although both change are slightly unintuitive, the
risk of further breakage is quite low, I hope.
Other than that, all the rest are trivial.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=wz0C
-----END PGP SIGNATURE-----
Merge tag 'sound-4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Again a relatively calm week without surprise: most of fixes are about
HD-audio, including fixes for Cirrus codec regression and a race over
regmap access. Although both change are slightly unintuitive, the
risk of further breakage is quite low, I hope.
Other than that, all the rest are trivial"
* tag 'sound-4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix possible race on regmap bypass flip
ALSA: pcxhr: Fix missing mutex unlock
ALSA: hda - add PCI ID for Intel Broxton-T
ALSA: hda - Keep powering up ADCs on Cirrus codecs
ALSA: hda/realtek - Add ALC3234 headset mode for Optiplex 9020m
ALSA - hda: hdmi check NULL pointer in hdmi_set_chmap
ALSA: hda - Don't trust the reported actual power state
The expected MCLK frequency ranges and the associated dividers
are updated to improve PLL locking in a corner scenario, with low
MCLK frequency near an input divider change boundary.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_find_dai() has been exported and so add the kerneldoc comments
for it.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Users have reported seeing this false warning on atom driver
[ 5.647469] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 0 doesn't have DAPM widget!!!
[ 5.661612] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 1 doesn't have DAPM widget!!!
[ 5.661646] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 2 doesn't have DAPM widget!!!
[ 5.661681] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 3 doesn't have DAPM widget!!!
[ 5.661708] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_0 doesn't have DAPM widget!!!
[ 5.661738] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_1 doesn't have DAPM widget!!!
[ 5.661771] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_0 doesn't have DAPM widget!!!
[ 5.661807] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_1 doesn't have DAPM widget!!!
This is caused when check for control is not being associated
with a dapm widget, but the check is wrong as the else case
maybe triggered when widget is not powered up, so we should
check if widget is associated before printing this message.
Tested-by: Sandeep Tayal <sandeepx.tayal@intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA doesn't know about all the different compressed audio formats,
so there is no interface to let userspace enumerate the formats that
are supported by the connected sink. Exporting the raw ELD bytes to
userspace allows an application to select the appropriate audio format
depending on the current capabilities of the connected HDMI sink device.
Usually userspace then just pretends to ALSA that the data is in one of
the raw 16-bit PCM audio formats and relies on the IEC controls to tell
the sink how to interpret the data.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Tested-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This creates pcmC0D2p for the HDMI playback in the same card.
Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
To avoid complex string manipulations with UUID in canonical
form, use UUID in binary format.
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds second I2S connection to rt5650 codec for capture path on
mt8173-rt5650 machine driver.
Signed-off-by: PC Liao <pc.liao@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
HD-audio driver uses regmap cache bypass feature for reading a raw
value without the cache. But this is racy since both the cached and
the uncached reads may occur concurrently. The former is done via the
normal control API access while the latter comes from the proc file
read.
Even though the regmap itself has the protection against the
concurrent accesses, the flag set/reset is done without the
protection, so it may lead to inconsistent state of bypass flag that
doesn't match with the current read and occasionally result in a
kernel WARNING like:
WARNING: CPU: 3 PID: 2731 at drivers/base/regmap/regcache.c:499 regcache_cache_only+0x78/0x93
One way to work around such a problem is to wrap with a mutex. But in
this case, the solution is simpler: for the uncached read, we just
skip the regmap and directly calls its accessor. The verb execution
there is protected by itself, so basically it's safe to call
individually.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When setting up an FLL in pseudo-fractional mode it is preferred
to use a lower FRATIO if possible to give a higher reference clock
frequency. This patch swaps the two loops in arizona_calc_fratio()
so that lower FRATIOs are tried first. The decrementing loop is also
changed to start from init_ratio because the original settings might
already give a fractional value for N.K
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit [9bef72bdb2: ALSA: pcxhr: Use nonatomic PCM ops]
converted to non-atomic PCM ops, but shamelessly with an unbalanced
mutex locking, which leads to the hangup easily. Fix it.
Fixes: 9bef72bdb2 ('ALSA: pcxhr: Use nonatomic PCM ops')
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116441
Cc: <stable@vger.kernel.org> # 3.18+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The input mixers support routing the IN1_R pin to the Left PGA and the
IN2_L pin to the Right PGA. This patch allows for those routings.
Signed-off-by: Jeremy McDermond <nh6z@nh6z.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
The input pins of the aic3204 have resistors inline with them. The
current code assumes that you want a 10k resistor inline with your
inputs and implements it as a simple switch. This patch creates an enum
for each pin and allows you to switch between not connected, 10k, 20k
and 40k ohm values. This more closely models the acutal aic3204 part.
These pin settings are documented in TI's SLAA557 pages 135 and 136
(http://www.ti.com/lit/ml/slaa557/slaa557.pdf).
Signed-off-by: Jeremy McDermond <nh6z@nh6z.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
When creating a FE link, the cpu_dai_name will come from topology and
dpcm will be enabled by default.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This API can be used by topology to find an existing BE dai by name
and further configure it.
Topology will also check DAI ID to avoid wrong match.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Topology will set the link's generic id when creating a FE link.
Device drivers can check the id for link specific initialization.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The generic ID can be used by topology:
- Toplogy can create FE links and set their ID, machine drivers will
be notified and check this ID for machine-specific init.
- Toplogy can use the ID to find existing BE & CC links and further
configure them.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This flag is a no-op now (see commit 47b0eeb3dc "clk: Deprecate
CLK_IS_ROOT", 2016-02-02) so remove it.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This flag is a no-op now (see commit 47b0eeb3dc "clk: Deprecate
CLK_IS_ROOT", 2016-02-02) so remove it.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add HD Audio Device PCI ID for the Intel Broxton-T platform.
It is an HDA Intel PCH controller.
Signed-off-by: Lu, Han <han.lu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although one weird behavior about the input path (inconsistent D0/D3
switch) on Cirrus CS420x codecs was fixed in the previous commit,
there is still an issue on some Mac machines: the capture stream
stalls when switching the ADCs on the fly. More badly, this keeps
stuck until the next reboot.
The dynamic ADC switching is already a bit fragile and assuming
optimistically that the chip accepts the frequent power changes. On
Cirrus codecs, this doesn't seem applicable.
As a quick workaround, we pin down the ADCs to keep up in D0 when
spec->dyn_adc_switch is set. In this way, the ADCs are kept up only
for the system that were confirmed to be broken.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The TLV320AIC32x4 series supports 96ksps rates in hardware. This patch
adds the necessary PLL divider values and clock settings to the table to
make 96ksps work.
Signed-off-by: Jeremy McDermond <nh6z@nh6z.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Lenovo 100S netbook has a codec controller for which there is a
driver, but doesn't know how to access the device. This adds the
necessary ACPI table for the driver to find the device.
Device (TTLV)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "10TI3100") // _HID: Hardware ID
Name (_CID, "10TI3100") // _CID: Compatible ID
Name (_DDN, "TI TLV320AIC3100 Codec Controller ") // _DDN: DOS Device Name
Name (_UID, One) // _UID: Unique ID
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Tested-by: Jan Schmidt <jan@centricular.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The PLL function was updated to disallow 32KHz in
commit 501f72e9c5 ("ASoC: da7219: Remove support for 32KHz PLL mode"),
but set_dai_sysclk() was missed and still permits it. This patch resolves
that discrepancy.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The expected MCLK frequency ranges and the associated dividers
are updated to improve PLL locking in a corner scenario, with low
MCLK frequency near an input divider change boundary.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The "Line In->Rear Out Switch" control on ens1371 driver returns a
bogus value, always true, as its check is totally broken. Fix it to
check the proper GPIO bit mask.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for running the tlv32x4 control channel over SPI rather than I2C.
Signed-off-by: Jeremy McDermond <nh6z@nh6z.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
To prepare for abstracting adding SPI support, the I2C pieces needs to
be in its own moudle. This patch moves common probe code into aic32x4_probe
and common removal code into aic32x4_remove. It also creates a static
regmap config structure to be copied in the I2C specific driver.
Signed-off-by: Jeremy McDermond <nh6z@nh6z.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
The codec's probe function is named aic32x4_probe. This is going to
conflict with later work to implement SPI support and separate out I2S
into its own file. In line with other drivers in the tree, this function
is renamed to aic32x4_codec_probe instead.
Signed-off-by: Jeremy McDermond <nh6z@nh6z.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
The hdmi-codec is a platform device driver to be registered from
drivers of external HDMI encoders with I2S and/or spdif interface. The
driver in turn registers an ASoC codec for the HDMI encoder's audio
functionality.
The structures and definitions in the API header are mostly redundant
copies of similar structures in ASoC headers. This is on purpose to
avoid direct dependencies to ASoC structures in video side driver.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Acked-by: PC Liao <pc.liao@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds DT support for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx McBSP driver.
Signed-off-by: Petr Kulhavy <petr@barix.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
By default, player#0 is connected to I2S/TDM TX bus.
This patch connects player#1 to I2S/TDM TX bus.
Signed-off-by: Moise Gergaud <moise.gergaud@st.com>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Optiplex 9020m with Haswell-DT processor needs a quirk for the
headset jack at the front of the machine to be able to use microphones.
A quirk for this model was originally added in 3127899, but c77900e
removed it in favour of a more generic version.
Unfortunately, pin configurations can changed based on firmware/BIOS
versions, and the generic version doesn't have any effect on newer
versions of the machine/firmware anymore.
With help from David Henningsson <diwic@ubuntu.com>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Tested-by: Bastien Nocera <hadess@hadess.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make sure per_pin is not NULL before using it.
Fixes: 9b3dc8aa3f ('ALSA: hda - Register chmap obj as priv data instead of codec')
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've got a regression report that the recording on Mac with a cirrus
codec doesn't work any longer. This turned out to be the missing
power up to D0 by power_save_node enablement.
After analyzing the traces, we found out that the culprit is that the
codec advertises the "actual" power state of a few nodes to be D0
while the "target" power state is D3. This inconsistency is usually
OK, as it implies the power transition. But in the case of cirrus
codec, this seems to be stuck to D3 while it's not actually D0.
This patch addresses the issue by checking the power state difference
more strictly. It sends the power-state change verb unless both the
target and the actual power states show the given value.
We may introduce yet another flag indicating the possible broken
hardware power state, but it's anyway safer to set the proper power
state even in a transition (at least it's harmless as long as the
target state is same). So this simpler change was applied now.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We request one of the DSP IRQs during CODEC probe, as such we should
free it during CODEC remove, this patch does so.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The thermal warning IRQs for the speaker are requested in CODEC probe
but never freed. This patch frees them in CODEC remove.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
lx_pipe_state() checks the return value from lx_message_send_atomic()
and breaks the loop only when it's a negative value. However,
lx_message_send_atomic() may return a positive error code (as the
return code from the hardware), and then lx_pipe_state() tries to
compare the uninitialized current_state variable.
Fix this behavior by checking the positive non-zero error code as
well.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
we've had a very calm development cycle, so far. Here are the few
fixes for HD-audio and USB-audio, all of which are small and easy.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJXD2IxAAoJEGwxgFQ9KSmkckEQAJUw0T+6LGzvt91R1NUTvVc2
N5UAVWblefXL32siYFVNQ7H1PJMrCLdgMb6jBXUYvWxSPKtn37v/RAdSVC3LFTq1
V8tbmEkMZJzNECTeLH/wnj4reRjXO/hS1GibKx7ZdPGEaYWZV+T0kHkufu7s/KmC
THNspUwchfgcKc4BNkVm/ateypkPbuhA/hq6jB+XwjSE46AaZYVvDwy7uIbSEJhL
kODppXrOLp0qjUtU2T+vZXFghmv2d4FCt42R80KNwREQMzq1KNprP7uG64sz4hFw
Er/OTuhRezBssgr2xHvqF0mFQAjSMSJDB2j3tQGOaWjWR0aDHM8KKP9qjl4iWQ9e
FJ7fxmiPJqEd4Ixm+2KZXEfWk8dpF+d/6tPgi43oxz3svKwMKbS4CRANIOJvTxvQ
CCZkyqeySw6RR0OSXb2wwQlv39CEnAX872JpLpwH7kWLn27q8Prxojm5SH6iFJPv
fHVgDw9vZ2QWE6fN2sPZFP/4TQ39XWptt+gTFV6r2aX9OkYWv4MFGdypMxOOiG2P
TnyHIczqwjz/9f8OaI2F0U+bXmFC6IaC8tTBht1abhMcqe3jfpJDWccuHX7QNDGn
6Kcwb1pfgylk2NqAf2jc+X8LPwI/mqtMRNsYu6hOedVSwuSF76xDlafhdyfS8Ygp
IivXk+F+YdpX85fwVffp
=PYqq
-----END PGP SIGNATURE-----
Merge tag 'sound-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"We've had a very calm development cycle, so far. Here are the few
fixes for HD-audio and USB-audio, all of which are small and easy"
* tag 'sound-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix inconsistent monitor_present state until repoll
ALSA: hda - Fix regression of monitor_present flag in eld proc file
ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB Dock
ALSA: hda/realtek - Enable the ALC292 dock fixup on the Thinkpad T460s
ALSA: sscape: Use correct format identifier for size_t
ALSA: usb-audio: Add a quirk for Plantronics BT300
ALSA: usb-audio: Add a sample rate quirk for Phoenix Audio TMX320
ALSA: hda - Bind with i915 only when Intel graphics is present
Currently kill_fasync() is called outside the stream lock in
snd_pcm_period_elapsed(). This is potentially racy, since the stream
may get released even during the irq handler is running. Although
snd_pcm_release_substream() calls snd_pcm_drop(), this doesn't
guarantee that the irq handler finishes, thus the kill_fasync() call
outside the stream spin lock may be invoked after the substream is
detached, as recently reported by KASAN.
As a quick workaround, move kill_fasync() call inside the stream
lock. The fasync is rarely used interface, so this shouldn't have a
big impact from the performance POV.
Ideally, we should implement some sync mechanism for the proper finish
of stream and irq handler. But this oneliner should suffice for most
cases, so far.
Reported-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While the previous commit fixed the missing monitor_present flag
update, it may be still in an inconsistent state while the driver
repolls: the flag itself is updated, but the eld_valid flag and the
contents don't follow until the repoll finishes (and may be repeated
for a few times).
The basic problem is that pin_eld->monitor_present is updated in the
caller side. This should have been updated only in update_eld(). So,
the proper fix is to avoid accessing pin_eld but only spec->temp_eld.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit [bd48128539: ALSA: hda - Fix forgotten HDMI
monitor_present update] covered the missing update of monitor_present
flag, but this caused a regression for devices without the i915 eld
notifier. Since the old code supposed that pin_eld->monitor_present
was updated by the caller side, the hdmi_present_sense_via_verbs()
doesn't update the temporary eld->monitor_present but only
pin_eld->monitor_present, which is now overridden in update_eld().
The fix is to update pin_eld->monitor_present as well before calling
update_eld().
Note that this may still leave monitor_present flag in an inconsistent
state when the driver repolls, but this is at least the old behavior.
More proper fix will follow in the later patch.
Fixes: bd48128539 ('ALSA: hda - Fix forgotten HDMI monitor_present update')
Signed-off-by: Hyungwon Hwang <hyungwon.hwang7@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Documentation/printk-formats.txt has
unsigned long: use %lu or %lx
size_t: use %zu or %zx
runtime->dma_bytes is of type size_t.
runtime->min_align is of type unsigned long.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Documentation/printk-formats.txt has
size_t: use %zu or %zx
runtime->dma_bytes is of type size_t.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The calls for capture_hook were missing in dyn_adc_capture_pcm_prepare
and cleanup callbacks. Luckily there are no users of the capture
hooks with dyn-adc PCM, so far, thus this doesn't change the behavior
of existing devices, but it's a fix for a future usage.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is Dell usb dock audio workaround.
It was fixed the master volume keep lower.
[Some background: the patch essentially skips the controls of a couple
of FU volumes. Although the firmware exposes the dB and the value
information via the usb descriptor, changing the values (we set the
min volume as default) screws up the device. Although this has been
fixed in the newer firmware, the devices are shipped with the old
firmware, thus we need the workaround in the driver side. -- tiwai]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
FW expects sampling rate rounded up to next higher integer value
when calculating ibs/obs. For example for 44.1k, it should be
rounded up to 45 to calculate ibs/obs.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Here are the changes to enable reader tdm mode:
- When TDM_ENABLE is set to 1, the i2s format should be automatically
configured. Unfortunately this is not the case (HW bug). Then, we shall
force DATA_SIZE setting.
- Compute the transfer size for tdm mode: transfer size = user frame size
- Manage tdm slots configuration given in DT.
- Refine the hw param (channels & format) according to tdm slot config.
Signed-off-by: Moise Gergaud <moise.gergaud@st.com>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
here are the changes to enable player tdm mode:
- When TDM_ENABLE is set to 1, the i2s format should be automatically
configured. Unfortunately this is not the case (HW bug). Then, we shall
force DATA_SIZE setting.
- Compute the transfer size for tdm mode: transfer size = user frame size
- Manage tdm slots configuration given in DT.
- Don't use mclk-fs when unip in tdm mode; use tdm slot config to compute
frame size and to set mclk rate.
- Refine the hw param (channels & format) according to tdm slot config.
Signed-off-by: Moise Gergaud <moise.gergaud@st.com>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Lenovo Thinkpad T460s requires the alc_fixup_tpt440_dock as well in
order to get working sound output on the docking stations headphone jack.
Patch tested on a Thinkpad T460s (20F9CT01WW) using a ThinkPad Ultradock
on kernel 4.4.6.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 'size' member of a struct firmware is passed to snd_printk with a
respective format string using the %d identifier. The 'size' member is
of type size_t, but format identifier %d indicates a signed int data
type. This patch replaces the %d format identifier with the correct %zu
format identifier for size_t data types.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The CS47L24 and WM1831 codecs only use the OUT4L widget so we can
skip creation of the OUT4R widget.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
miniDSP USBStreamer UAC2 devices send clock validity changes with the
control field set to zero. The current interrupt handler ignores all
packets if the control field does not match the mixer element's, but
it really should only do that in case that field is needed to
distinguish multiple elements with the same ID.
This patch implements a logic that lets notifications packets pass
if the element ID is unique for a given device.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UAC2 specifies clock sources that optionally have validity controls.
This patch exposes them as mixer controls, so they can be read (and
at least in theory even be written) by userspace applications in order
to make clock selection policy decisions.
This implementation does nothing if the device is not UAC2 compliant,
or if the clock source does not define said validity control bits.
Tested with a miniDSP USBStreamer (0x2752/0x0016).
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ct_timer_ops structures are never modified, so declare them as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
acpi_dev_present() was originally named after pci_dev_present()
to signify the similarity of the two functions.
However Rafael J. Wysocki pointed out that the exported function
acpi_dev_present() is easily confused with the non-exported
acpi_device_is_present(). Additionally in ACPI parlance the term
"present" usually refers to the "device is present" bit returned
by the _STA control method, yet acpi_dev_present() merely checks
presence in the namespace. It does not invoke _STA at all, let
alone check the "device is present" bit.
As suggested by Rafael, rename the function to acpi_dev_found()
and adjust all existing call sites.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch makes Designware I2S driver use the fifo
depth value to program the fifo configuration register
instead of using hardcoded values.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Treat 32 bit sample width as if it was 24 bits when generating IEC958
channel status bits. On some platforms 24 sample width is problematic
and to get full 24 bit precision a 32 bit format, using only the 24
most significant bits, may have to be used.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add IEC958 channel status helper that gets the audio properties from
snd_pcm_hw_params instead of snd_pcm_runtime. This is needed to
produce the channel status bits already in audio stream configuration
phase.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
If we encounter an error on the DSP side whilst user-space is
waiting on the poll we should call snd_compr_fragment_elapsed,
although data is not actually available we want to wake
user-space such that the error can be propagated out
quickly. Additionally some versions of the DSP firmware are
not super consistent about actually generating an IRQ if they
encounter an error, as such we will check the DSP error status
every time we run out of available data as well, to ensure we
catch it.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Factor out the reading of the DSP error flag into its own function to
support further improvements to the code.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In the original code we ended the loop with tries set to -1 instead of
zero.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Plantronics BT300 does not support reading the sample rate which leads
to many lines of "cannot get freq at ep 0x1". This patch adds the USB
ID of the BT300 to quirks.c and avoids those error messages.
Signed-off-by: Dennis Kadioglu <denk@post.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
intel8x0 driver has the inside_vm check for skipping a buggy hardware
workaround in the PCM pointer callback in the commit [228cf79376:
ALSA: intel8x0: Improve performance in virtual environment]. This was
originally applied to all devices on known VMs, but the code was
switched to use the PCI ID matching for applying to only known
devices (KVM and Parallels), in order to avoid applying wrongly to
VT-d and other such cases, in the commit [7fb4f392bd: ALSA:
intel8x0: improve virtual environment detection].
Meanwhile, the original VM check was kept even after switching to the
PCI ID matching. It was partly because we weren't 100% sure whether
we had covered all well, and partly because this would help
identifying the issue once when a user of another VM hit the same
problem or a regression. Currently the VM check is used only for
showing the kernel message that the VM-optimization isn't applied, and
the VM check itself doesn't change the actual driver behavior at all.
Despite the relatively safe driver behavior, the code caught attention
of developers badly and brought many confusion / misunderstanding.
Since we've got neither regression nor enhancement report for other
VMs for five years long, it's likely safe to drop this superfluous VM
check now.
The module option is still kept, so if a user still needs to adjust,
it can be applied as was.
Acked-by: Konstantin Ozerkov <kozerkov@parallels.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is no need to unmask all interrupts at I2S start. This
can cause performance issues in slower platforms.
Unmask only the interrupts for the used channels.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=eZp5
-----END PGP SIGNATURE-----
Merge tag 'media/v4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Some bug fixes on au0828 and snd-usb-audio:
- the au0828+snd-usb-audio MC patch broke several things and produced
some race conditions. Better to revert the patches, and re-work on
them for a next version
- fix a regression at tuner disable links logic
- properly handle dev_state as a bitmask"
* tag 'media/v4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] Revert "[media] media: au0828 change to use Managed Media Controller API"
[media] Revert "[media] sound/usb: Use Media Controller API to share media resources"
[media] au0828: Fix dev_state handling
[media] au0828: fix au0828_v4l2_close() dev_state race condition
[media] media: au0828 fix to clear enable/disable/change source handlers
[media] v4l2-mc: cleanup a warning
[media] au0828: disable tuner links and cache tuner/decoder
The existing TLV callback implementation copies all of the
cea_channel_speaker_allocation map table to the TLV container
irrespective of what is reported by sink. This is of little use
to the userspace application.
With this patch, it parses the spk_alloc block as queried from
the ELD, and copies only the corresponding mapping channel
allocation entries from the cea channel speaker allocation table.
Thus the user can parse the TLV container to identify sink's
capability and set the channel map accordingly.
It shouldn't impact the behavior in AMD chipset, as this makes
use of already parsed spk alloc block to calculate the channel
map.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Phoenix Audio TMX320 gives the similar error when the sample rate is
asked:
usb 2-1.3: 2:1: cannot get freq at ep 0x85
usb 2-1.3: 1:1: cannot get freq at ep 0x2
....
Add the corresponding USB-device ID (1de7:0014) to
snd_usb_get_sample_rate_quirk() list.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110221
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On Skylake and onwards, the HD-audio controller driver needs to bind
with i915 for having the control of power well audio domain before
actually probing the codec. This leads to the load of i915 driver
from the audio driver side. But, there are systems that have no Intel
graphics but Nvidia or AMD GPU, although they still use HD-audio bus
for the onboard audio codecs. On these, loading the i915 driver is
nothing but a useless memory and CPU consumption.
A simple way to avoid it is just to look for the Intel graphics PCI
entry beforehand, and try to bind with i915 only when such an entry is
found. Currently, it assumes the PCI display class. If another class
appears, this needs to be extended (although it's very unlikely).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If the system enters S3 during a playback, codec power needs to
be turned OFF during suspend and restored during resume. With
this patch the AFG node is set to D3 and codec power is turned
OFF during controller suspend call.
During resume, the codec power is left in ON state if the
playback was in progress while suspending.
Also setting power state for AFG node is optimized. With this the
loop with timeout is removed and codec_read is used instead.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use dev_pm ops feature instead of soc pm as core assumes system
is capable of direct complete. Register with complete callback
instead of resume to synchronize with Jack notification from
display driver. This ensures correct Jack notification to user
space.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of small fixes:
- A fix in ALSA timer core to avoid possible BUG() trigger
- A fix in ALSA timer core 32bit compat layer
- A few HD-audio quirks for ASUS and HP machines
- AMD HD-audio HDMI controller quirks
- Fixes of USB-audio double-free at some error paths
- A fix for memory leak in DICE driver at hotunplug
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=9ORd
-----END PGP SIGNATURE-----
Merge tag 'sound-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes:
- a fix in ALSA timer core to avoid possible BUG() trigger
- a fix in ALSA timer core 32bit compat layer
- a few HD-audio quirks for ASUS and HP machines
- AMD HD-audio HDMI controller quirks
- fixes of USB-audio double-free at some error paths
- a fix for memory leak in DICE driver at hotunplug"
* tag 'sound-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: timer: Use mod_timer() for rearming the system timer
ALSA: hda - fix front mic problem for a HP desktop
ALSA: usb-audio: Fix double-free in error paths after snd_usb_add_audio_stream() call
ALSA: hda: add AMD Polaris-10/11 AZ PCI IDs with proper driver caps
ALSA: dice: fix memory leak when unplugging
ALSA: hda - Apply fix for white noise on Asus N550JV, too
ALSA: hda - Fix white noise on Asus N750JV headphone
ALSA: hda - Asus N750JV external subwoofer fixup
ALSA: timer: fix gparams ioctl compatibility for different architectures
ALSA system timer backend stops the timer via del_timer() without sync
and leaves del_timer_sync() at the close instead. This is because of
the restriction by the design of ALSA timer: namely, the stop callback
may be called from the timer handler, and calling the sync shall lead
to a hangup. However, this also triggers a kernel BUG() when the
timer is rearmed immediately after stopping without sync:
kernel BUG at kernel/time/timer.c:966!
Call Trace:
<IRQ>
[<ffffffff8239c94e>] snd_timer_s_start+0x13e/0x1a0
[<ffffffff8239e1f4>] snd_timer_interrupt+0x504/0xec0
[<ffffffff8122fca0>] ? debug_check_no_locks_freed+0x290/0x290
[<ffffffff8239ec64>] snd_timer_s_function+0xb4/0x120
[<ffffffff81296b72>] call_timer_fn+0x162/0x520
[<ffffffff81296add>] ? call_timer_fn+0xcd/0x520
[<ffffffff8239ebb0>] ? snd_timer_interrupt+0xec0/0xec0
....
It's the place where add_timer() checks the pending timer. It's clear
that this may happen after the immediate restart without sync in our
cases.
So, the workaround here is just to use mod_timer() instead of
add_timer(). This looks like a band-aid fix, but it's a right move,
as snd_timer_interrupt() takes care of the continuous rearm of timer.
Reported-by: Jiri Slaby <jslaby@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The front mic jack (pink color) can't detect any plug or unplug. After
applying this fix, both detecting function and recording function
work well.
BugLink: https://bugs.launchpad.net/bugs/1564712
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
IS_ERR_VALUE should be used only with unsigned long type,
signed types should use comparison 'ret < 0'
This patch removes such usages.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes following static checker warning, by initializing the
ret to -EINVAL, as one of the code path in lpass_platform_pcm_new()
uses this variable uninitialized.
sound/soc/qcom/lpass-platform.c:555 lpass_platform_pcm_new()
error: uninitialized symbol 'ret'.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Unfortunately, this patch caused several regressions at au0828 and
snd-usb-audio, like this one:
https://bugzilla.kernel.org/show_bug.cgi?id=115561
It also showed several troubles at the MC core that handles pretty
poorly the memory protections and data lifetime management.
So, better to revert it and fix the core before reapplying this
change.
This reverts commit aebb2b89bf ("[media] sound/usb: Use Media
Controller API to share media resources")'
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The list of TAS571x registers was incomplete.
Added the missing register definitions up to the register 0x25.
Added volatile and read-only register tables into tas5711_regmap_config
and tas5717_regmap_config.
The chip has 256 registers in total. But from address 0x29 on
(0x26 to 0x28 are reserved) the register width varies between
20, 12 and 8 bytes, which the register map cannot represent.
Signed-off-by: Petr Kulhavy <petr@barix.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
create_fixed_stream_quirk(), snd_usb_parse_audio_interface() and
create_uaxx_quirk() functions allocate the audioformat object by themselves
and free it upon error before returning. However, once the object is linked
to a stream, it's freed again in snd_usb_audio_pcm_free(), thus it'll be
double-freed, eventually resulting in a memory corruption.
This patch fixes these failures in the error paths by unlinking the audioformat
object before freeing it.
Based on a patch by Takashi Iwai <tiwai@suse.de>
[Note for stable backports:
this patch requires the commit 902eb7fd1e ('ALSA: usb-audio: Minor
code cleanup in create_fixed_stream_quirk()')]
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1283358
Reported-by: Ralf Spenneberg <ralf@spenneberg.net>
Cc: <stable@vger.kernel.org> # see the note above
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When some digi00x units are connected sequentially, userspace
applications are involved at bus-reset state on IEEE 1394 bus. In the
state, any communications can be canceled. Therefore, sound card
registration should be delayed till the bus gets calm.
This commit achieves it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some oxfw based units tends to fail asynchronous communication when
IEEE 1394 bus is under bus-reset state. When registering sound card
instance at unit probe callback, userspace applications can be involved
to the state.
This commit postpones the registration till the bus is calm.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When some fireworks units are connected sequentially, userspace
applications are involved at bus-reset state on IEEE 1394 bus. In the
state, any communications can be canceled. Therefore, sound card
registration should be delayed till the bus gets calm.
This commit achieves it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some bebob based units tends to fail asynchronous communication when
IEEE 1394 bus is under bus-reset state. When registering sound card
instance at unit probe callback, userspace applications can be involved
to the state.
This commit postpones the registration till the bus is calm.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In former commit, ALSA dice driver postpone sound card registration after
IEEE 1394 bus is calm. This idea has advantages for the other drivers.
This commit adds a helper function for it to firewire-lib module. The
function is really for the specific purpose. Callers should initialize
delayed work structure with callback function.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In former commit, ALSA dice driver doesn't generate kernel warnings
when unplugging units before initializing stream data.
This commit moves the initialization to delayed registration of sound
card, to simplify unit probe processing.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When any of AMDTP stream data are not initialized and private data is
going to be released, WARN_ON() in amdtp_stream_destroy() is hit and
dump messages. This may take users irritated.
This commit fixes the bug to skip releasing when it's not initialized.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit fixes garbled audio on Polaris-10/11 variants
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The chip selection was relying only on DT. It was not possible to use the
driver without DT.
This adds the chip type detection from the I2C name, which
allows to use the driver from the platform driver without DT.
Signed-off-by: Petr Kulhavy <petr@barix.com>
Reviewed-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Broxton DSP is mostly similar to Skylake one but with subtle
differences like no Code Load DMA and uses HDA DMA for code
loading, DSP D0 and D3 sequences are different.
These changes are comprehended by adding different DSP power up
and down handlers, and new loader ops and also adding prepare and
trigger which HDA DSP DMA requires
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Jayachandran B <jayachandran.b@intel.com>
Signed-off-by: GuruprasadX Pawse <guruprasadx.pawse@intel.com>
Signed-off-by: Kranthi G <gudishax.kranthikumar@intel.com>
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Signed-off-by: Ramesh Babu <ramesh.babu@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add function stub for "sst_acpi_find_name_from_hid()"
when CONFIG_ACPI is not enabled so that the driver will build
successfully. This fixes the following build errors:
(loadable module)
ERROR: "sst_acpi_find_name_from_hid" [sound/soc/intel/boards/snd-soc-sst-bytcr-rt5640.ko] undefined!
(or built-in)
bytcr_rt5640.c:(.text+0x26fc52): undefined reference to `sst_acpi_find_name_from_hid'
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that this is directly user selectable it needs to care about its
dependencies.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver did not have a mute function. The amplifier was brought out of
shutdown mode (hard-mute) once for ever in probe(), which was causing
clicks and pops when altering the I2C register configuration later.
This adds the digital_mute() function. The amplifier unmute in probe()
was removed.
Signed-off-by: Petr Kulhavy <petr@barix.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
cs47l24 supports the audio trace firmware, this streams of audio to be
captured from the CODEC over a compressed audio channel for
analysis/debugging of audio processing firmwares.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
All other debug messages talk about data on the compressed stream in
bytes except avail which is shown in words. To avoid confusion show
avail in bytes as well.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Firstly, we should be locking the pwr_lock when we initialise the
compressed buffer. Secondly, fixup a couple of places when we should be
pulling pointers only under the pwr_lock as they may be affected by
operations that take that lock.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When trying to use simple card with wm8962 the following probe
error happens:
wm8962 0-001a: simple-card: set_sysclk error
asoc-simple-card sound: ASoC: failed to init 202c000.ssi-wm8962: -22
asoc-simple-card sound: ASoC: failed to instantiate card -22
asoc-simple-card: probe of sound failed with error -22
In simple-card.c the snd_soc_dai_set_sysclk() function is called with
clk_id as 0, which is an invalid clock for wm8962.
Adjust the clocks source definitions in wm8962.h so that the
simple card driver can work successfully.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable dspclk holds the rate of the DSPCLK, but the variable
sysclk holds an identifier for the clock. Currently if read a
non-sensical value from the DSPCLK_DIV register we assign sysclk to
dspclk, clearly this was intended to be sysclk_rate.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The error message fits well into a single line.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When regulator_bulk_enable() fails inside wm8962_runtime_resume(),
we should disable the previously enabled clock.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The hdac_acomp object in hdac_i915.c is left as assigned even after
binding with i915 actually fails, and this leads to the WARN_ON() at
the next load of the module.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94736
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit [d745f5e7b8: ALSA: hda - Add the pin / port mapping on
Intel ILK and VLV] introduced a WARN_ON() to check the pointer for
avoiding the double initializations. But hdac_acomp pointer wasn't
cleared at snd_hdac_i915_exit(), thus after reloading the HD-audio
driver, it may result in the false positive warning. This patch makes
sure to clear the leftover pointer at exit.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94736
Reported-by: Daniela Doras-prodan <daniela.doras-prodan@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Provide a menu selection text so that users can enable, disable or
mark it as module in menuconfig.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Jack plug status is rechecked at resume to handle plug/unplug
in S3 when the chip has no power.
Suspend/resume callbacks are moved from the i2c dev_pm_ops to
snd_soc_codec_driver. soc_resume_deferred is a delayed work
which may trigger nau8825_set_bias_level. The bias change races
against dev_pm_ops, causing jack detection issues.
soc_resume_deferred ensures bias change and snd_soc_codec_driver
suspend/resume are sequenced correctly.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
In PRE PMD of widget handler DSP resources are allocated after
the creation of DSP pipe and modules and in POST PMD DSP
resources are destroyed.
If there is any failure in pipe or module creation in PRE PMD,
pcm trigger fails and finally POST PMD gets called and DSP
resources are freed, without getting allocated.
Fixes the DSP resource de-allocation by allocating the resource
before creation of pipe and module in PRE PMD and in POST PMD,
free the resources.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Module needs to be unloaded only when it is loaded successfully.
To fix this, first correct the module state sequence and set module
state to LOADED if module is loaded successfully.
When unloading the module check if module state is not in UNINIT,
then unload it.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
I forgot it.
Fixes: 3e78e1518e12('ALSA: firewire-tascam: add support for FW-1804')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, model-specific quirks are detected out of information parser,
however it's natural to detect it in the parser.
This commit applies the idea.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In former commit, 'struct device_info' is obsoleted, whereas private
structure still keeps a pointer to it.
This commit remove the member.
d6ce6bbd7d83('ALSA: oxfw: rename a structure so that it means backward compatibility to old drivers')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 'vendor_id' argument is not used in the local function. Let's remove
it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since we have the fixed pin-port mapping for Intel IronLake (IbexPeak)
and Baytrail (ValleyView) platforms in the code side, now it's time to
add the support in the codec driver side. This patch simply enables
the i915 ELD notifier for these in addition with the fix of the
mapping from the port to NID in the callback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Intel IronLake and ValleyView platforms have different HDMI widget pin
and digital port mapping from other newer ones. The recent ones
(HSW+) have NID 0x05 to 0x07 for port B to port D, while these chips
have NID 0x04 to 0x06.
For adapting this mapping, pass the codec object instead of the bus
object to snd_hdac_sync_audio_rate() and snd_hdac_acomp_get_eld() so
that they can check the codec ID and calculate the mapping properly.
The changes in the HDMI codec driver side will follow in the later
patch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Intel SandyBridge and IvyBridge (CougarPoint and PantherPoint
platforms) have also the same digital port vs audio widget mapping
(from port B = NID 0x05 to port D = NID 0x07) as Haswell & co.
So, we can reuse the existing functions for HSW+ for these platforms
without changing there, but just by re-adding the on-demand i915
binding in HDMI codec driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For reducing the splat of is_haswell_plus() or such macros, this patch
introduces pin_cvt_fixup() ops to hdmi_spec. For HSW+ and VLV+
codecs, set this ops so that the driver can call the Intel-specific
workarounds appropriately.
A gratis bonus that we can remove the mux_id argument from
hdmi_choose_cvt(), too, since the fixup function always refers the
mux_idx from the given per_pin object.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of checking at each time with is_haswell_plus() macro,
override the setup_stream ops itself for HSW+ chips.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The need for reprogramming the AMP mute bit at each audio info frame
setup isn't always specific to Intel chips. It's safer to set it
generically for all codecs with the amp bit, as this verb execution
itself isn't too much load. This eliminates one usage of
is_haswell_plus() macro, after all.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have too many Intel-specific codes in patch_hdmi_generic() despite
its function name. And this makes it difficult to adjust per chipset,
e.g. for allowing the audio notifier on an old chipset, one would need
to add an explicit if() check.
This patch attempts some code refactoring and cleanups in this regard;
the Intel-specific codes are moved out of patch_generic_hdmi() into
the new functions, patch_i915_hsw_hdmi() and patch_i915_byt_hdmi(),
depending on the chipset. The other old Intel chipsets keep using
patch_generic_hdmi() without Intel hacks. The existing
patch_generic_hdmi() is also split to a few components so that they
can be called from the Intel codec parsers.
There are still many is_haswell*() and is_valleyview*() macro usages
in the code. They will be cleaned up later. For the time being, only
the entry are concerned.
Along with this change, the i915_bound flag and the on-demand i915
component binding have been removed as a cleanup, since there is no
user at this moment. This will be added back later once when Cougar
Point and else start using the i915 eld notifier.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When sound card is going to be released, dice private data is
also released. Then all of data should be released. However,
stream data is not released. This causes memory leak when
unplugging dice unit.
This commit fixes the bug.
Fixes: 4bdc495c87b3('ALSA: dice: handle several PCM substreams when any isochronous streams are available')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply the new fixup that is used for ASUS N750JV to another similar
model, N500JV, too, for reducing the headphone noise.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181
Signed-off-by: Bobi Mihalca <bobbymihalca@touchtech.ro>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For reducing the noise from the headphone output on ASUS N750JV,
call the existing fixup, alc_fixup_auto_mute_via_amp(), additionally.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181
Signed-off-by: Bobi Mihalca <bobbymihalca@touchtech.ro>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS N750JV needs the same fixup as N550 for enabling its subwoofer.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181
Signed-off-by: Bobi Mihalca <bobbymihalca@touchtech.ro>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
'struct snd_timer_gparams' includes some members with 'unsigned long',
therefore its size differs depending on data models of architecture. As
a result, x86/x32 applications fail to execute ioctl(2) with
SNDRV_TIMER_GPARAMS command on x86_64 machine.
This commit fixes this bug by adding a pair of structure and ioctl
command for the compatibility.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous pull request introduced a few WARN_ON() for Intel
HD-audio HDMI. Indeed it caught bugs, and now users get annoyed.
So this request came up: a collection of small fixes to paper over
the inconsistencies on (mostly) old Intel chipsets.
In addition, a trivial USB-audio quirk is included, too.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJW8R25AAoJEGwxgFQ9KSmkwVsP/2vrRqqDcKKotz90MOJzy7Ll
xAgULBLFaz9K7w8g005wjBNfHFhKOgIelHqKItsBR9IOIXAcDhwwqfsgSu/nl/D1
UyvCN4lQvZV6ksFwnPg8Z7w31BmWdncBT2DV/MA+HmcCnJLL7JvZbuW5hDNyozp9
npVvZlVN6fUNGI0D75TtDXJSY45h87cTzY8g519FkJrd5kuklkaGwd79Ak6VnucD
MPTSwxluEl8xUgzvY+Po+k50rHla2WXm0h0k5Ut10xGRbs1GAczQy58wXrueFRlD
Pq/1cVh8RKppFekpFp4lEK7HAgo8Ml5sTod1V3FFa2Q3LIrb63pereFbPO/S6rjS
N0oeFmGRYR7nDSnnAOg3IXCfRuki6K6pxliplNIENJpG5e+saVeEjsSbpcgaFRJ6
a1uvo2ikpGbtWrgTAbW2m8fecnqJU8DPK9IyDS5OYaJ4ffjeJtUDxL6J+j5haUUc
36Ego02LpmucBDgw1Xt701Ee9aVNuuFcS6jOqyv7DM6MzT5IhOLzv9CzjTbJVPax
oNSGjxQJ7Qnq8kABgjr2POtjjnx/b9jGnbU0YkB7ObAKOINQKWmQGO22pE7EVByF
0czcV+eEjvdqKzjfj00SHnGX7MI15bBWDQWy4vxz/mJZrua9oYaTQaRVaotlpaq/
9H1jjfitzhfVINceQiBd
=ac9g
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The previous pull request introduced a few WARN_ON() for Intel
HD-audio HDMI. Indeed it caught bugs, and now users get annoyed. So
this request came up: a collection of small fixes to paper over the
inconsistencies on (mostly) old Intel chipsets.
In addition, a trivial USB-audio quirk is included, too"
* tag 'sound-fix-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix missing ELD update at unplugging
ALSA: usb-audio: add Microsoft HD-5001 to quirks
ALSA: hda - Workaround for unbalanced i915 power refcount by concurrent probe
ALSA: hda - Fix spurious kernel WARNING on Baytrail HDMI
ALSA: hda - Fix forgotten HDMI monitor_present update
ALSA: hda - Really restrict i915 notifier to HSW+
i915 get_eld ops may return an error when no encoder is connected, and
currently we regard the error as fatal and skip the whole ELD
handling. This ended up with the missing ELD update at unplugging.
This patch fixes the issue by treating the error as the unplugged
state, instead of skipping the rest.
Reported-by: Libin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.5
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Microsoft HD-5001 webcam microphone does not support sample rate
reading as the HD-5000 one.
This results in dmesg errors and sound hanging with pulseaudio.
Signed-off-by: Victor Clément <victor.clement@openmailbox.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent addition of on-demand i915 audio component binding in the
codec driver seems leading to the unbalanced i915 power refcount,
according to Intel CI tests. Typically, it gets a kernel WARNING
like:
WARNING: CPU: 3 PID: 173 at sound/hda/hdac_i915.c:91 snd_hdac_display_power+0xf1/0x110 [snd_hda_core]()
Call Trace:
[<ffffffff813fef15>] dump_stack+0x67/0x92
[<ffffffff81078a21>] warn_slowpath_common+0x81/0xc0
[<ffffffff81078b15>] warn_slowpath_null+0x15/0x20
[<ffffffffa00f77e1>] snd_hdac_display_power+0xf1/0x110 [snd_hda_core]
[<ffffffffa015039d>] azx_intel_link_power+0xd/0x10 [snd_hda_intel]
[<ffffffffa011e32a>] azx_link_power+0x1a/0x30 [snd_hda_codec]
[<ffffffffa00f21f9>] snd_hdac_link_power+0x29/0x40 [snd_hda_core]
[<ffffffffa01192a6>] hda_codec_runtime_suspend+0x76/0xa0 [snd_hda_codec]
.....
The scenario is like below:
- HD-audio driver and i915 driver are probed concurrently at the
(almost) same time; HDA bus tries to bind with i915, but it fails
because i915 initialization is still being processed.
- Later on, HD-audio probes the HDMI codec, where it again tries to
bind with i915. At this time, it succeeds.
- At finishing the probe of HDA, it decreases the refcount as if it
were already bound at the bus probe, since the component is bound
now. This triggers a kernel WARNING due to the unbalance.
As a workaround, in this patch, we just disable the on-demand i915
component binding in the codec driver. This essentially reverts back
to the state of 4.4 kernel.
We know that this is no real solution, but it's a minimalistic simple
change that can be applied to 4.5.x kernel as stable.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94566
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.5
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge second patch-bomb from Andrew Morton:
- a couple of hotfixes
- the rest of MM
- a new timer slack control in procfs
- a couple of procfs fixes
- a few misc things
- some printk tweaks
- lib/ updates, notably to radix-tree.
- add my and Nick Piggin's old userspace radix-tree test harness to
tools/testing/radix-tree/. Matthew said it was a godsend during the
radix-tree work he did.
- a few code-size improvements, switching to __always_inline where gcc
screwed up.
- partially implement character sets in sscanf
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
sscanf: implement basic character sets
lib/bug.c: use common WARN helper
param: convert some "on"/"off" users to strtobool
lib: add "on"/"off" support to kstrtobool
lib: update single-char callers of strtobool()
lib: move strtobool() to kstrtobool()
include/linux/unaligned: force inlining of byteswap operations
include/uapi/linux/byteorder, swab: force inlining of some byteswap operations
include/asm-generic/atomic-long.h: force inlining of some atomic_long operations
usb: common: convert to use match_string() helper
ide: hpt366: convert to use match_string() helper
ata: hpt366: convert to use match_string() helper
power: ab8500: convert to use match_string() helper
power: charger_manager: convert to use match_string() helper
drm/edid: convert to use match_string() helper
pinctrl: convert to use match_string() helper
device property: convert to use match_string() helper
lib/string: introduce match_string() helper
radix-tree tests: add test for radix_tree_iter_next
radix-tree tests: add regression3 test
...
snd_hdac_sync_audio_rate() call is mandatory only for HSW and later
models, but we call the function unconditionally blindly assuming that
the function doesn't do anything harmful. But since recently, the
function checks the validity of the passed pin NID, and eventually
spews the warning if an unexpected pin is passed. This is seen on old
chips like Baytrail.
The fix is to limit the call of this function again only for the chips
with the proper binding. This can be identified by the same flag as
the eld notifier.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.5
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After a heavy storm by syzkaller in 4.5 cycle, we have relatively few
changes in the core at this time while a lot of changes are found in
the driver side, unsurprisingly. Below are some highlights:
ALSA core:
- A few more hardening in ALSA timer codes
- An extension of sequencer API for advertising the card / pid
- Small fixes in compress-offload and jack layers
HD-audio:
- Dynamic PCM assignment in HDMI/DP codec; preparation for upcoming
DP-MST support
- Lots of code refactoring for sharing with ASoC SKL driver
- Regression fixes for Intel HDMI/DP
- Fixups for CX20724 codec, Lenovo AiO
USB-audio:
- Add quirk_alias option to make quirk debugging easier
- Fixes for possible Oops by malformed firmware
Firewire:
- Add support for FW-1804 in tascam driver
- Improvements / changes in card registration, multi stream handling,
etc for DICE
- Lots of code refactoring
ASoC:
- Enhancements of still ongoing topology API
- Lots of commits for Intel Skylake support including HDMI support
- A few Intel Atom driver updates for recent devices
- Lots of improvements to the Renesas drivers
- Capture support for Qualcomm drivers
- Support for TI DaVinci DRA7xxx devices
- New machine drivers for Freescale systems with Cirrus CODECs,
Mediatek systems with RT5650 CODECs
- New CPU drivers for Allwinner S/PDIF controllers
- New CODEC drivers for Maxim MAX9867 and MAX98926 and Realtek RT5514
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Cc+v
-----END PGP SIGNATURE-----
Merge tag 'sound-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"After a heavy storm by syzkaller in 4.5 cycle, we have relatively few
changes in the core at this time while a lot of changes are found in
the driver side, unsurprisingly. Below are some highlights:
ALSA core:
- A few more hardening in ALSA timer codes
- An extension of sequencer API for advertising the card / pid
- Small fixes in compress-offload and jack layers
HD-audio:
- Dynamic PCM assignment in HDMI/DP codec; preparation for upcoming
DP-MST support
- Lots of code refactoring for sharing with ASoC SKL driver
- Regression fixes for Intel HDMI/DP
- Fixups for CX20724 codec, Lenovo AiO
USB-audio:
- Add quirk_alias option to make quirk debugging easier
- Fixes for possible Oops by malformed firmware
Firewire:
- Add support for FW-1804 in tascam driver
- Improvements / changes in card registration, multi stream handling,
etc for DICE
- Lots of code refactoring
ASoC:
- Enhancements of still ongoing topology API
- Lots of commits for Intel Skylake support including HDMI support
- A few Intel Atom driver updates for recent devices
- Lots of improvements to the Renesas drivers
- Capture support for Qualcomm drivers
- Support for TI DaVinci DRA7xxx devices
- New machine drivers for Freescale systems with Cirrus CODECs,
Mediatek systems with RT5650 CODECs
- New CPU drivers for Allwinner S/PDIF controllers
- New CODEC drivers for Maxim MAX9867 and MAX98926 and Realtek RT5514"
* tag 'sound-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (291 commits)
ALSA: hda - Fix mutex deadlock at HDMI/DP hotplug
ALSA: ctl: change return value in compatibility layer so that it's the same value in core implementation
ALSA: mixart: silence an uninitialized variable warning
ALSA: usb-audio: Add sanity checks for endpoint accesses
ALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk()
ALSA: usb-audio: Fix NULL dereference in create_fixed_stream_quirk()
ALSA: hda - Limit i915 HDMI binding only for HSW and later
ALSA: hda - Fix unconditional GPIO toggle via automute
ALSA: mixart: silence unitialized variable warnings
ALSA: hda - Fixes double fault in nvhdmi_chmap_cea_alloc_validate_get_type
ALSA: intel8x0: Add clock quirk entry for AD1981B on IBM ThinkPad X41.
ALSA: hda - Add new GPU codec ID 0x10de0082 to snd-hda
ASoC: rsnd: add simplified module explanation
ASoC: hdac_hdmi: Add broxton device ID
ASoC: Intel: Bxtn: Add Broxton PCI ID
ASoC: Intel: Skylake: Move Skylake dsp ops & loader ops
ASoC: Intel: add dmabuffer to common sst_dsp
ASoC: Intel: Skylake: Unstatify skl_dsp_enable_core
ASoC: Intel: Skylake: Fix whitepsace issues
ASoC: Intel: Skylake: Move module id defines
...
We forgot to copy monitor_present value when updating the ELD
information. This won't change the ELD retrieval and the jack
notification behavior, but appears only in the proc output. In that
sense, it's no fatal error, but a bug is a bug is a bug.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Skylake driver selects SND_HDA_I915 which causes kbuild to spew warning:
warning: (SND_SOC_INTEL_SKYLAKE) selects SND_HDA_I915 which has unmet direct dependencies
(SOUND && !M68K && !UML && SND && DRM_I915 && SND_HDA_CORE)
The SND_HDA_I915 should not be selected so drop that.
Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit [b62232d429: ALSA: hda - Limit i915 HDMI binding only for
HSW and later] tried to limit the usage of i915 audio notifier to the
recent Intel models and switch to the old method on pre-Haswell
models. However, it assumed that the i915 component binding hasn't
been done on such models, and the assumption was wrong: namely,
Baytrail had already the i915 component binding due to powerwell
control. Thus, the workaround wasn't applied to Baytrail.
For fixing this properly, this patch introduces a new flag indicating
the usage of audio notifier and codec_has_acomp() refers to this flag
instead of checking the existence of audio component.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.5
Signed-off-by: Takashi Iwai <tiwai@suse.de>
