Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTSzg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylH3QCfbZuG8MiglEZUd4slRLUNqcRQ5tQAn1yKpDFo
l3KLkxo1UTLMXbJBWe+b
=gafK
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
cdx: add sysfs for subsystem, class and revision
cdx: add sysfs for bus reset
cdx: add support for bus enable and disable
cdx: Register cdx bus as a device on cdx subsystem
cdx: Create symbol namespaces for cdx subsystem
cdx: Introduce lock to protect controller ops
cdx: Remove cdx controller list from cdx bus system
dts: ti: k3-am625-beagleplay: Add beaglecc1352
greybus: Add BeaglePlay Linux Driver
dt-bindings: net: Add ti,cc1352p7
dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
Revert "nvmem: add new config option"
MAINTAINERS: coresight: Add missing Coresight files
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
uacce: make uacce_class constant
ocxl: make ocxl_class constant
cxl: make cxl_class constant
misc: phantom: make phantom_class constant
...
This branch has three new iommufd capabilities:
- Dirty tracking for DMA. AMD/ARM/Intel CPUs can now record if a DMA
writes to a page in the IOPTEs within the IO page table. This can be used
to generate a record of what memory is being dirtied by DMA activities
during a VM migration process. A VMM like qemu will combine the IOMMU
dirty bits with the CPU's dirty log to determine what memory to
transfer.
VFIO already has a DMA dirty tracking framework that requires PCI
devices to implement tracking HW internally. The iommufd version
provides an alternative that the VMM can select, if available. The two
are designed to have very similar APIs.
- Userspace controlled attributes for hardware page
tables (HWPT/iommu_domain). There are currently a few generic attributes
for HWPTs (support dirty tracking, and parent of a nest). This is an
entry point for the userspace iommu driver to control the HW in detail.
- Nested translation support for HWPTs. This is a 2D translation scheme
similar to the CPU where a DMA goes through a first stage to determine
an intermediate address which is then translated trough a second stage
to a physical address.
Like for CPU translation the first stage table would exist in VM
controlled memory and the second stage is in the kernel and matches the
VM's guest to physical map.
As every IOMMU has a unique set of parameter to describe the S1 IO page
table and its associated parameters the userspace IOMMU driver has to
marshal the information into the correct format.
This is 1/3 of the feature, it allows creating the nested translation
and binding it to VFIO devices, however the API to support IOTLB and
ATC invalidation of the stage 1 io page table, and forwarding of IO
faults are still in progress.
The series includes AMD and Intel support for dirty tracking. Intel
support for nested translation.
Along the way are a number of internal items:
- New iommu core items: ops->domain_alloc_user(), ops->set_dirty_tracking,
ops->read_and_clear_dirty(), IOMMU_DOMAIN_NESTED, and iommu_copy_struct_from_user
- UAF fix in iopt_area_split()
- Spelling fixes and some test suite improvement
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZUDu2wAKCRCFwuHvBreF
YcdeAQDaBmjyGLrRIlzPyohF6FrombyWo2512n51Hs8IHR4IvQEA3oRNgQ2tsJRr
1UPuOqnOD5T/oVX6AkUPRBwanCUQwwM=
=nyJ3
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"This brings three new iommufd capabilities:
- Dirty tracking for DMA.
AMD/ARM/Intel CPUs can now record if a DMA writes to a page in the
IOPTEs within the IO page table. This can be used to generate a
record of what memory is being dirtied by DMA activities during a
VM migration process. A VMM like qemu will combine the IOMMU dirty
bits with the CPU's dirty log to determine what memory to transfer.
VFIO already has a DMA dirty tracking framework that requires PCI
devices to implement tracking HW internally. The iommufd version
provides an alternative that the VMM can select, if available. The
two are designed to have very similar APIs.
- Userspace controlled attributes for hardware page tables
(HWPT/iommu_domain). There are currently a few generic attributes
for HWPTs (support dirty tracking, and parent of a nest). This is
an entry point for the userspace iommu driver to control the HW in
detail.
- Nested translation support for HWPTs. This is a 2D translation
scheme similar to the CPU where a DMA goes through a first stage to
determine an intermediate address which is then translated trough a
second stage to a physical address.
Like for CPU translation the first stage table would exist in VM
controlled memory and the second stage is in the kernel and matches
the VM's guest to physical map.
As every IOMMU has a unique set of parameter to describe the S1 IO
page table and its associated parameters the userspace IOMMU driver
has to marshal the information into the correct format.
This is 1/3 of the feature, it allows creating the nested
translation and binding it to VFIO devices, however the API to
support IOTLB and ATC invalidation of the stage 1 io page table,
and forwarding of IO faults are still in progress.
The series includes AMD and Intel support for dirty tracking. Intel
support for nested translation.
Along the way are a number of internal items:
- New iommu core items: ops->domain_alloc_user(),
ops->set_dirty_tracking, ops->read_and_clear_dirty(),
IOMMU_DOMAIN_NESTED, and iommu_copy_struct_from_user
- UAF fix in iopt_area_split()
- Spelling fixes and some test suite improvement"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (52 commits)
iommufd: Organize the mock domain alloc functions closer to Joerg's tree
iommufd/selftest: Fix page-size check in iommufd_test_dirty()
iommufd: Add iopt_area_alloc()
iommufd: Fix missing update of domains_itree after splitting iopt_area
iommu/vt-d: Disallow read-only mappings to nest parent domain
iommu/vt-d: Add nested domain allocation
iommu/vt-d: Set the nested domain to a device
iommu/vt-d: Make domain attach helpers to be extern
iommu/vt-d: Add helper to setup pasid nested translation
iommu/vt-d: Add helper for nested domain allocation
iommu/vt-d: Extend dmar_domain to support nested domain
iommufd: Add data structure for Intel VT-d stage-1 domain allocation
iommu/vt-d: Enhance capability check for nested parent domain allocation
iommufd/selftest: Add coverage for IOMMU_HWPT_ALLOC with nested HWPTs
iommufd/selftest: Add nested domain allocation for mock domain
iommu: Add iommu_copy_struct_from_user helper
iommufd: Add a nested HW pagetable object
iommu: Pass in parent domain with user_data to domain_alloc_user op
iommufd: Share iommufd_hwpt_alloc with IOMMUFD_OBJ_HWPT_NESTED
iommufd: Derive iommufd_hwpt_paging from iommufd_hw_pagetable
...
Create CDX_BUS and CDX_BUS_CONTROLLER symbol namespace for cdx bus
subsystem. CDX controller modules are required to import symbols from
CDX_BUS_CONTROLLER namespace and other than controller modules to
import from CDX_BUS namespace.
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-4-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Have the IOVA bitmap exported symbols adhere to the IOMMUFD symbol
export convention i.e. using the IOMMUFD namespace. In doing so,
import the namespace in the current users. This means VFIO and the
vfio-pci drivers that use iova_bitmap_set().
Link: https://lore.kernel.org/r/20231024135109.73787-4-joao.m.martins@oracle.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Both VFIO and IOMMUFD will need iova bitmap for storing dirties and walking
the user bitmaps, so move to the common dependency into IOMMUFD. In doing
so, create the symbol IOMMUFD_DRIVER which designates the builtin code that
will be used by drivers when selected. Today this means MLX5_VFIO_PCI and
PDS_VFIO_PCI. IOMMU drivers will do the same (in future patches) when
supporting dirty tracking and select IOMMUFD_DRIVER accordingly.
Given that the symbol maybe be disabled, add header definitions in
iova_bitmap.h for when IOMMUFD_DRIVER=n
Link: https://lore.kernel.org/r/20231024135109.73787-3-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In preparation to move iova_bitmap into iommufd, export the rest of API
symbols that will be used in what could be used by modules, namely:
iova_bitmap_alloc
iova_bitmap_free
iova_bitmap_for_each
Link: https://lore.kernel.org/r/20231024135109.73787-2-joao.m.martins@oracle.com
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
smatch reports:
vfio_combine_iova_ranges() error: uninitialized symbol 'last'.
vfio_combine_iova_ranges() error: potentially dereferencing uninitialized 'comb_end'.
vfio_combine_iova_ranges() error: potentially dereferencing uninitialized 'comb_start'.
These errors are only reachable via invalid input, in the case of
@last when we receive an empty rb-tree or for @comb_{start,end} if the
rb-tree is empty or otherwise fails to produce a second node that
reduces the gap. Add tests with warnings for these cases.
Reported-by: Cong Liu <liucong2@kylinos.cn>
Link: https://lore.kernel.org/all/20230920095532.88135-1-liucong2@kylinos.cn
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://lore.kernel.org/r/20231002224325.3150842-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When building with clang, there is a warning (or error with
CONFIG_WERROR=y) due to a bitwise AND and logical NOT in
vfio_cdx_bm_ctrl():
drivers/vfio/cdx/main.c:77:6: error: logical not is only applied to the left hand side of this bitwise operator [-Werror,-Wlogical-not-parentheses]
77 | if (!vdev->flags & BME_SUPPORT)
| ^ ~
drivers/vfio/cdx/main.c:77:6: note: add parentheses after the '!' to evaluate the bitwise operator first
77 | if (!vdev->flags & BME_SUPPORT)
| ^
| ( )
drivers/vfio/cdx/main.c:77:6: note: add parentheses around left hand side expression to silence this warning
77 | if (!vdev->flags & BME_SUPPORT)
| ^
| ( )
1 error generated.
Add the parentheses as suggested in the first note, which is clearly
what was intended here.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1939
Fixes: 8a97ab9b8b ("vfio-cdx: add bus mastering device feature support")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20231002-vfio-cdx-logical-not-parentheses-v1-1-a8846c7adfb6@kernel.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that all pieces are in place, activate the chunk mode functionality
based on device capabilities.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230911093856.81910-10-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add support for READING in chunk mode.
In case the last SAVE command recognized that there was still some image
to be read, however, there was no available chunk to use for, this task
was delayed for the reader till one chunk will be consumed and becomes
available.
In the above case, a work will be executed to read in the background the
next image from the device.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230911093856.81910-9-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add support for SAVING in chunk mode, it includes running a work
that will fill the next chunk from the device.
In case the number of available chunks will reach the MAX_NUM_CHUNKS,
the next chunk SAVING will be delayed till the reader will consume one
chunk.
The next patch from the series will add the reader part of the chunk
mode.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230911093856.81910-8-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch is another preparation step towards working in chunk mode.
It pre-allocates chunks for the STOP_COPY phase to let the driver use
them immediately and prevent an extra allocation upon that phase.
Before that patch we had a single large buffer that was dedicated for
the STOP_COPY phase as there was a single SAVE in the source for the
last image.
Once we'll move to chunk mode the idea is to have some small buffers
that will be used upon the STOP_COPY phase.
The driver will read-ahead from the firmware the full state in
small/optimized chunks while letting QEMU/user space read in parallel
the available data.
Each buffer holds its chunk number to let it be recognized down the road
in the coming patches.
The chunk buffer size is picked-up based on the minimum size that
firmware requires, the total full size and some max value in the driver
code which was set to 8MB to achieve some optimized downtime in the
general case.
As the chunk mode is applicable even if we move directly to STOP_COPY
the buffers preparation and some other related stuff is done
unconditionally with regards to STOP/PRE-COPY.
Note:
In that phase in the series we still didn't activate the chunk mode and
the first buffer will be used in all the places.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230911093856.81910-7-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Upon chunk mode there may be multiple images that will be read from the
device upon STOP_COPY.
This patch is some preparation for that mode by replacing the relevant
stuff to a better matching name.
As part of that, be stricter to recognize PRE_COPY error only when it
didn't occur on a STOP_COPY chunk.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230911093856.81910-6-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Once the device supports 'chunk mode' the driver can support state size
which is larger than 4GB.
In that case the device has the capability to split a single image to
multiple chunks as long as the software provides a buffer in the minimum
size reported by the device.
The driver should query for the minimum buffer size required using
QUERY_VHCA_MIGRATION_STATE command with the 'chunk' bit set in its
input, in that case, the output will include both the minimum buffer
size (i.e. required_umem_size) and also the remaining total size to be
reported/used where that it will be applicable.
At that point in the series the 'chunk' bit is off, the last patch will
activate the feature once all pieces will be ready.
Note:
Before this change we were limited to 4GB state size as of 4 bytes max
value based on the device specification for the query/save/load
commands.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230911093856.81910-5-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Upon a successful SAVE callback there is no need to activate a work, all
the required stuff can be done directly.
As so, refactor the above flow to activate a work only upon an error.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230911093856.81910-4-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Post of disabling the SAVING migration file, which includes setting the
file state to be MLX5_MIGF_STATE_ERROR, call to wake_up_interruptible()
on its poll_wait member.
This lets any potential reader which is waiting already for data as part
of mlx5vf_save_read() to wake up, recognize the error state and return
with an error.
Post of that we don't need to rely on any other condition to wake up
the reader as of the returning of the SAVE command that was previously
executed, etc.
In addition, this change will simplify error flows (e.g health recovery)
once we'll move to chunk mode and multiple SAVE commands may run in the
STOP_COPY phase as we won't need to rely any more on a SAVE command to
wake-up a potential waiting reader.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230911093856.81910-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Support Bus master enable and disable on VFIO-CDX devices using
VFIO_DEVICE_FEATURE_BUS_MASTER flag over VFIO_DEVICE_FEATURE IOCTL.
Co-developed-by: Shubham Rohila <shubham.rohila@amd.com>
Signed-off-by: Shubham Rohila <shubham.rohila@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Link: https://lore.kernel.org/r/20230915045423.31630-3-nipun.gupta@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The pci_physfn() helper exists to support cases where the physfn
field may not be compiled into the pci_dev structure. We've
declared this driver dependent on PCI_IOV to avoid this problem,
but regardless we should follow the precedent not to access this
field directly.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230914021332.1929155-1-oushixiong@kylinos.cn
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If PCI_ATS isn't set, then pdev->physfn is not defined.
it causes a compilation issue:
../drivers/vfio/pci/pds/vfio_dev.c:165:30: error: ‘struct pci_dev’ has no member named ‘physfn’; did you mean ‘is_physfn’?
165 | __func__, pci_dev_id(pdev->physfn), pci_id, vf_id,
| ^~~~~~
So adding PCI_IOV depends to select PCI_ATS.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230906014942.1658769-1-oushixiong@kylinos.cn
Fixes: 63f77a7161 ("vfio/pds: register with the pds_core PF")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This includes a shared branch with VFIO:
- Enhance VFIO_DEVICE_GET_PCI_HOT_RESET_INFO so it can work with iommufd
FDs, not just group FDs. This removes the last place in the uAPI that
required the group fd.
- Give VFIO a new device node /dev/vfio/devices/vfioX (the so called cdev
node) which is very similar to the FD from VFIO_GROUP_GET_DEVICE_FD.
The cdev is associated with the struct device that the VFIO driver is
bound to and shows up in sysfs in the normal way.
- Add a cdev IOCTL VFIO_DEVICE_BIND_IOMMUFD which allows a newly opened
/dev/vfio/devices/vfioX to be associated with an IOMMUFD, this replaces
the VFIO_GROUP_SET_CONTAINER flow.
- Add cdev IOCTLs VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT to allow the IOMMU
translation the vfio_device is associated with to be changed. This is a
significant new feature for VFIO as previously each vfio_device was
fixed to a single translation.
The translation is under the control of iommufd, so it can be any of
the different translation modes that iommufd is learning to create.
At this point VFIO has compilation options to remove the legacy interfaces
and in modern mode it behaves like a normal driver subsystem. The
/dev/vfio/iommu and /dev/vfio/groupX nodes are not present and each
vfio_device only has a /dev/vfio/devices/vfioX cdev node that represents
the device.
On top of this is built some of the new iommufd functionality:
- IOMMU_HWPT_ALLOC allows userspace to directly create the low level
IO Page table objects and affiliate them with IOAS objects that hold
the translation mapping. This is the basic functionality for the
normal IOMMU_DOMAIN_PAGING domains.
- VFIO_DEVICE_ATTACH_IOMMUFD_PT can be used to replace the current
translation. This is wired up to through all the layers down to the
driver so the driver has the ability to implement a hitless
replacement. This is necessary to fully support guest behaviors when
emulating HW (eg guest atomic change of translation)
- IOMMU_GET_HW_INFO returns information about the IOMMU driver HW that
owns a VFIO device. This includes support for the Intel iommu, and
patches have been posted for all the other server IOMMU.
Along the way are a number of internal items:
- New iommufd kapis iommufd_ctx_has_group(), iommufd_device_to_ictx(),
iommufd_device_to_id(), iommufd_access_detach(), iommufd_ctx_from_fd(),
iommufd_device_replace()
- iommufd now internally tracks iommu_groups as it needs some per-group
data
- Reorganize how the internal hwpt allocation flows to have more robust
locking
- Improve the access interfaces to support detach and replace of an IOAS
from an access
- New selftests and a rework of how the selftests creates a mock iommu
driver to be more like a real iommu driver
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZO/QDQAKCRCFwuHvBreF
YZ2iAP4hNEF6MJLRI2A28V3I/80f3x9Ed3Cirp/Q8ZdVEE+HYQD8DFaafJ0y3iPQ
5mxD4ZrZ9KfUns/gUqCT5oPHjrcvSAM=
=EQCw
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"On top of the vfio updates is built some new iommufd functionality:
- IOMMU_HWPT_ALLOC allows userspace to directly create the low level
IO Page table objects and affiliate them with IOAS objects that
hold the translation mapping. This is the basic functionality for
the normal IOMMU_DOMAIN_PAGING domains.
- VFIO_DEVICE_ATTACH_IOMMUFD_PT can be used to replace the current
translation. This is wired up to through all the layers down to the
driver so the driver has the ability to implement a hitless
replacement. This is necessary to fully support guest behaviors
when emulating HW (eg guest atomic change of translation)
- IOMMU_GET_HW_INFO returns information about the IOMMU driver HW
that owns a VFIO device. This includes support for the Intel iommu,
and patches have been posted for all the other server IOMMU.
Along the way are a number of internal items:
- New iommufd kernel APIs: iommufd_ctx_has_group(),
iommufd_device_to_ictx(), iommufd_device_to_id(),
iommufd_access_detach(), iommufd_ctx_from_fd(),
iommufd_device_replace()
- iommufd now internally tracks iommu_groups as it needs some
per-group data
- Reorganize how the internal hwpt allocation flows to have more
robust locking
- Improve the access interfaces to support detach and replace of an
IOAS from an access
- New selftests and a rework of how the selftests creates a mock
iommu driver to be more like a real iommu driver"
Link: https://lore.kernel.org/lkml/ZO%2FTe6LU1ENf58ZW@nvidia.com/
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (34 commits)
iommufd/selftest: Don't leak the platform device memory when unloading the module
iommu/vt-d: Implement hw_info for iommu capability query
iommufd/selftest: Add coverage for IOMMU_GET_HW_INFO ioctl
iommufd: Add IOMMU_GET_HW_INFO
iommu: Add new iommu op to get iommu hardware information
iommu: Move dev_iommu_ops() to private header
iommufd: Remove iommufd_ref_to_users()
iommufd/selftest: Make the mock iommu driver into a real driver
vfio: Support IO page table replacement
iommufd/selftest: Add IOMMU_TEST_OP_ACCESS_REPLACE_IOAS coverage
iommufd: Add iommufd_access_replace() API
iommufd: Use iommufd_access_change_ioas in iommufd_access_destroy_object
iommufd: Add iommufd_access_change_ioas(_id) helpers
iommufd: Allow passing in iopt_access_list_id to iopt_remove_access()
vfio: Do not allow !ops->dma_unmap in vfio_pin/unpin_pages()
iommufd/selftest: Add a selftest for IOMMU_HWPT_ALLOC
iommufd/selftest: Return the real idev id from selftest mock_domain
iommufd: Add IOMMU_HWPT_ALLOC
iommufd/selftest: Test iommufd_device_replace()
iommufd: Make destroy_rwsem use a lock class per object type
...
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is intended
to be the native uAPI for use with IOMMUFD. (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage.
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires. (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed Services
Card (PDS) Ethernet device, supporting live migration. (Brett Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code. (Li Zetao)
- Fix uninitialized hole in data structure and pad capability structures
for alignment. (Stefan Hajnoczi)
-----BEGIN PGP SIGNATURE-----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=eKSR
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is
intended to be the native uAPI for use with IOMMUFD (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed
Services Card (PDS) Ethernet device, supporting live migration (Brett
Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code (Li Zetao)
- Fix uninitialized hole in data structure and pad capability
structures for alignment (Stefan Hajnoczi)
* tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits)
vfio/pds: Send type for SUSPEND_STATUS command
vfio/pds: fix return value in pds_vfio_get_lm_file()
pds_core: Fix function header descriptions
vfio: align capability structures
vfio/type1: fix cap_migration information leak
vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code
vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver
vfio/pds: Add Kconfig and documentation
vfio/pds: Add support for firmware recovery
vfio/pds: Add support for dirty page tracking
vfio/pds: Add VFIO live migration support
vfio/pds: register with the pds_core PF
pds_core: Require callers of register/unregister to pass PF drvdata
vfio/pds: Initial support for pds VFIO driver
vfio: Commonize combine_ranges for use in other VFIO drivers
kvm/vfio: avoid bouncing the mutex when adding and deleting groups
kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
...
Commit bb500dbe2a ("vfio/pds: Add VFIO live migration support")
added live migration support for the pds-vfio-pci driver. When
sending the SUSPEND command to the device, the driver sets the
type of suspend (i.e. P2P or FULL). However, the driver isn't
sending the type of suspend for the SUSPEND_STATUS command, which
will result in failures. Fix this by also sending the suspend type
in the SUSPEND_STATUS command.
Fixes: bb500dbe2a ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821184215.34564-1-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
anon_inode_getfile() never returns NULL pointer, it will return
ERR_PTR() when it fails, so replace the check with IS_ERR().
Fixes: bb500dbe2a ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://lore.kernel.org/r/20230819023716.3469037-1-yangyingliang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The VFIO_DEVICE_GET_INFO, VFIO_DEVICE_GET_REGION_INFO, and
VFIO_IOMMU_GET_INFO ioctls fill in an info struct followed by capability
structs:
+------+---------+---------+-----+
| info | caps[0] | caps[1] | ... |
+------+---------+---------+-----+
Both the info and capability struct sizes are not always multiples of
sizeof(u64), leaving u64 fields in later capability structs misaligned.
Userspace applications currently need to handle misalignment manually in
order to support CPU architectures and programming languages with strict
alignment requirements.
Make life easier for userspace by ensuring alignment in the kernel. This
is done by padding info struct definitions and by copying out zeroes
after capability structs that are not aligned.
The new layout is as follows:
+------+---------+---+---------+-----+
| info | caps[0] | 0 | caps[1] | ... |
+------+---------+---+---------+-----+
In this example caps[0] has a size that is not multiples of sizeof(u64),
so zero padding is added to align the subsequent structure.
Adding zero padding between structs does not break the uapi. The memory
layout is specified by the info.cap_offset and caps[i].next fields
filled in by the kernel. Applications use these field values to locate
structs and are therefore unaffected by the addition of zero padding.
Note that code that copies out info structs with padding is updated to
always zero the struct and copy out as many bytes as userspace
requested. This makes the code shorter and avoids potential information
leaks by ensuring padding is initialized.
Originally-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230809203144.2880050-1-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Fix an information leak where an uninitialized hole in struct
vfio_iommu_type1_info_cap_migration on the stack is exposed to userspace.
The definition of struct vfio_iommu_type1_info_cap_migration contains a hole as
shown in this pahole(1) output:
struct vfio_iommu_type1_info_cap_migration {
struct vfio_info_cap_header header; /* 0 8 */
__u32 flags; /* 8 4 */
/* XXX 4 bytes hole, try to pack */
__u64 pgsize_bitmap; /* 16 8 */
__u64 max_dirty_bitmap_size; /* 24 8 */
/* size: 32, cachelines: 1, members: 4 */
/* sum members: 28, holes: 1, sum holes: 4 */
/* last cacheline: 32 bytes */
};
The cap_mig variable is filled in without initializing the hole:
static int vfio_iommu_migration_build_caps(struct vfio_iommu *iommu,
struct vfio_info_cap *caps)
{
struct vfio_iommu_type1_info_cap_migration cap_mig;
cap_mig.header.id = VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION;
cap_mig.header.version = 1;
cap_mig.flags = 0;
/* support minimum pgsize */
cap_mig.pgsize_bitmap = (size_t)1 << __ffs(iommu->pgsize_bitmap);
cap_mig.max_dirty_bitmap_size = DIRTY_BITMAP_SIZE_MAX;
return vfio_info_add_capability(caps, &cap_mig.header, sizeof(cap_mig));
}
The structure is then copied to a temporary location on the heap. At this point
it's already too late and ioctl(VFIO_IOMMU_GET_INFO) copies it to userspace
later:
int vfio_info_add_capability(struct vfio_info_cap *caps,
struct vfio_info_cap_header *cap, size_t size)
{
struct vfio_info_cap_header *header;
header = vfio_info_cap_add(caps, size, cap->id, cap->version);
if (IS_ERR(header))
return PTR_ERR(header);
memcpy(header + 1, cap + 1, size - sizeof(*header));
return 0;
}
This issue was found by code inspection.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Fixes: ad721705d0 ("vfio iommu: Add migration capability to report supported features")
Link: https://lore.kernel.org/r/20230801155352.1391945-1-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Use the module_fsl_mc_driver macro to simplify the code and
remove redundant initialization owner in vfio_fsl_mc_driver.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230809131536.4021639-1-lizetao1@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The cdx_driver_register() will set "THIS_MODULE" to driver.owner when
register a cdx_driver driver, so it is redundant initialization to set
driver.owner in the statement. Remove it for clean code.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230808020937.2975196-1-lizetao1@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add Kconfig entries and pds-vfio-pci.rst. Also, add an entry in the
MAINTAINERS file for this new driver.
It's not clear where documentation for vendor specific VFIO
drivers should live, so just re-use the current amd
ethernet location.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-9-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
It's possible that the device firmware crashes and is able to recover
due to some configuration and/or other issue. If a live migration
is in progress while the firmware crashes, the live migration will
fail. However, the VF PCI device should still be functional post
crash recovery and subsequent migrations should go through as
expected.
When the pds_core device notices that firmware crashes it sends an
event to all its client drivers. When the pds_vfio driver receives
this event while migration is in progress it will request a deferred
reset on the next migration state transition. This state transition
will report failure as well as any subsequent state transition
requests from the VMM/VFIO. Based on uapi/vfio.h the only way out of
VFIO_DEVICE_STATE_ERROR is by issuing VFIO_DEVICE_RESET. Once this
reset is done, the migration state will be reset to
VFIO_DEVICE_STATE_RUNNING and migration can be performed.
If the event is received while no migration is in progress (i.e.
the VM is in normal operating mode), then no actions are taken
and the migration state remains VFIO_DEVICE_STATE_RUNNING.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-8-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In order to support dirty page tracking, the driver has to implement
the VFIO subsystem's vfio_log_ops. This includes log_start, log_stop,
and log_read_and_clear.
All of the tracker resources are allocated and dirty tracking on the
device is started during log_start. The resources are cleaned up and
dirty tracking on the device is stopped during log_stop. The dirty
pages are determined and reported during log_read_and_clear.
In order to support these callbacks admin queue commands are used.
All of the adminq queue command structures and implementations
are included as part of this patch.
PDS_LM_CMD_DIRTY_STATUS is added to query the current status of
dirty tracking on the device. This includes if it's enabled (i.e.
number of regions being tracked from the device's perspective) and
the maximum number of regions supported from the device's perspective.
PDS_LM_CMD_DIRTY_ENABLE is added to enable dirty tracking on the
specified number of regions and their iova ranges.
PDS_LM_CMD_DIRTY_DISABLE is added to disable dirty tracking for all
regions on the device.
PDS_LM_CMD_READ_SEQ and PDS_LM_CMD_DIRTY_WRITE_ACK are added to
support reading and acknowledging the currently dirtied pages.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20230807205755.29579-7-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add live migration support via the VFIO subsystem. The migration
implementation aligns with the definition from uapi/vfio.h and uses
the pds_core PF's adminq for device configuration.
The ability to suspend, resume, and transfer VF device state data is
included along with the required admin queue command structures and
implementations.
PDS_LM_CMD_SUSPEND and PDS_LM_CMD_SUSPEND_STATUS are added to support
the VF device suspend operation.
PDS_LM_CMD_RESUME is added to support the VF device resume operation.
PDS_LM_CMD_STATE_SIZE is added to determine the exact size of the VF
device state data.
PDS_LM_CMD_SAVE is added to get the VF device state data.
PDS_LM_CMD_RESTORE is added to restore the VF device with the
previously saved data from PDS_LM_CMD_SAVE.
PDS_LM_CMD_HOST_VF_STATUS is added to notify the DSC/firmware when
a migration is in/not-in progress from the host's perspective. The
DSC/firmware can use this to clear/setup any necessary state related
to a migration.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-6-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The pds_core driver will supply adminq services, so find the PF
and register with the DSC services.
Use the following commands to enable a VF:
echo 1 > /sys/bus/pci/drivers/pds_core/$PF_BDF/sriov_numvfs
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-5-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is the initial framework for the new pds-vfio-pci device driver.
This does the very basics of registering the PDS PCI device and
configuring it as a VFIO PCI device.
With this change, the VF device can be bound to the pds-vfio-pci driver
on the host and presented to the VM as an ethernet VF.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-3-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently only Mellanox uses the combine_ranges function. The
new pds_vfio driver also needs this function. So, move it to
a common location for other vendor drivers to use.
Also, fix RCT ordering while moving/renaming the function.
Cc: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20230807205755.29579-2-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This commit enables the dynamic allocation of EQs at runtime, allowing
for more flexibility in managing completion EQs and reducing the memory
overhead of driver load. Whenever a CQ is created for a given vector
index, the driver will lookup to see if there is an already mapped
completion EQ for that vector, if so, utilize it. Otherwise, allocate a
new EQ on demand and then utilize it for the CQ completion events.
Add a protection lock to the EQ table to protect from concurrent EQ
creation attempts.
While at it, replace mlx5_vector2irqn()/mlx5_vector2eqn() with
mlx5_comp_eqn_get() and mlx5_comp_irqn_get() which will allocate an
EQ on demand if no EQ is found for the given vector.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
To accurately represent its purpose, rename the function that retrieves
the value of maximum vectors from mlx5_comp_vectors_count() to
mlx5_comp_vectors_max().
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Now both the physical path and the emulated path can support an IO page
table replacement. Call iommufd_device_replace/iommufd_access_replace(),
when vdev->iommufd_attached is true.
Also update the VFIO_DEVICE_ATTACH_IOMMUFD_PT kdoc in the uAPI header.
Link: https://lore.kernel.org/r/b5f01956ff161f76aa52c95b0fa1ad6eaca95c4a.1690523699.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A driver that doesn't implement ops->dma_unmap shouldn't be allowed to do
vfio_pin/unpin_pages(), though it can use vfio_dma_rw() to access an iova
range. Deny !ops->dma_unmap cases in vfio_pin/unpin_pages().
Link: https://lore.kernel.org/r/85d622729d8f2334b35d42f1c568df1ededb9171.1690523699.git.nicolinc@nvidia.com
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
vfio_group is not needed for vfio device cdev, so with vfio device cdev
introduced, the vfio_group infrastructures can be compiled out if only
cdev is needed.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-26-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The IOMMU_CAP_CACHE_COHERENCY check only applies to the physical devices
that are IOMMU-backed. But it is now in the group code. If want to compile
vfio_group infrastructure out, this check needs to be moved out of the group
code.
Another reason for this change is to fail the device registration for the
physical devices that do not have IOMMU if the group code is not compiled
as the cdev interface does not support such devices.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-25-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This adds ioctl for userspace to attach device cdev fd to and detach
from IOAS/hw_pagetable managed by iommufd.
VFIO_DEVICE_ATTACH_IOMMUFD_PT: attach vfio device to IOAS or hw_pagetable
managed by iommufd. Attach can be undo
by VFIO_DEVICE_DETACH_IOMMUFD_PT or device
fd close.
VFIO_DEVICE_DETACH_IOMMUFD_PT: detach vfio device from the current attached
IOAS or hw_pagetable managed by iommufd.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-24-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This adds ioctl for userspace to bind device cdev fd to iommufd.
VFIO_DEVICE_BIND_IOMMUFD: bind device to an iommufd, hence gain DMA
control provided by the iommufd. open_device
op is called after bind_iommufd op.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230718135551.6592-23-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This adds a local variable to store the user pointer cast result from arg.
It avoids the repeated casts in the code when more ioctls are added.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-22-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This saves some lines when adding the kvm get logic for the vfio_device
cdev path.
This also renames _vfio_device_get_kvm_safe() to be vfio_device_get_kvm_safe().
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-20-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This adds cdev support for vfio_device. It allows the user to directly
open a vfio device w/o using the legacy container/group interface, as a
prerequisite for supporting new iommu features like nested translation
and etc.
The device fd opened in this manner doesn't have the capability to access
the device as the fops open() doesn't open the device until the successful
VFIO_DEVICE_BIND_IOMMUFD ioctl which will be added in a later patch.
With this patch, devices registered to vfio core would have both the legacy
group and the new device interfaces created.
- group interface : /dev/vfio/$groupID
- device interface: /dev/vfio/devices/vfioX - normal device
("X" is a unique number across vfio devices)
For a given device, the user can identify the matching vfioX by searching
the vfio-dev folder under the sysfs path of the device. Take PCI device
(0000:6a:01.0) as an example, /sys/bus/pci/devices/0000\:6a\:01.0/vfio-dev/vfioX
implies the matching vfioX under /dev/vfio/devices/, and vfio-dev/vfioX/dev
contains the major:minor number of the matching /dev/vfio/devices/vfioX.
The user can get device fd by opening the /dev/vfio/devices/vfioX.
The vfio_device cdev logic in this patch:
*) __vfio_register_dev() path ends up doing cdev_device_add() for each
vfio_device if VFIO_DEVICE_CDEV configured.
*) vfio_unregister_group_dev() path does cdev_device_del();
cdev interface does not support noiommu devices, so VFIO only creates the
legacy group interface for the physical devices that do not have IOMMU.
noiommu users should use the legacy group interface.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-19-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
device_del() destroys the vfio-dev/vfioX under the sysfs for vfio_device.
There is no reason to keep it while the device is going to be unregistered.
This movement is also a preparation for adding vfio_device cdev. Kernel
should remove the cdev node of the vfio_device to avoid new registration
refcount increment while the device is going to be unregistered.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-18-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
