Use wqe_cnt instead of max which means the queue size of srq, and remove
wqe_ctr which is not used.
Link: https://lore.kernel.org/r/1572952082-6681-5-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Special QP have no differences with normal qp in data structure, so
definition of struct hns_roce_sqp should be removed and replaced by struct
hns_roce_qp.
Link: https://lore.kernel.org/r/1572952082-6681-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
SRQ's page size configuration of BA and buffer should depend on current
PAGE_SHIFT, or it can't work in scenario of 64K page.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1571908917-16220-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Even if no response from hardware, we should make sure that qp related
resources are released to avoid memory leaks.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1570584110-3659-1-git-send-email-liweihang@hisilicon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
We used wrong shifts when set qp_attr->qp_access_flag,
this patch exchange V2_QP_RRE_S and V2_QP_RWE_S to fix it.
Fixes: 2a3d923f87 ("RDMA/hns: Replace magic numbers with #defines")
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-10-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the hardware is resetting, the driver should not perform
the mailbox operation.Function-clear needs to add relevant judgment.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-7-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sparse is whining about the u32 and __le32 mixed usage in the driver.
The roce_set_field() is used to __le32 data of hardware only.
If a variable is not delivered to the hardware, the __le32 type and
related operations are not required.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-6-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
kasan will report a BUG when run command 'insmod hns_roce_hw_v2.ko', the
calltrace is as follows:
==================================================================
BUG: KASAN: slab-out-of-bounds in hns_roce_v2_init_eq_table+0x1324/0x1948
[hns_roce_hw_v2]
Read of size 8 at addr ffff8020e7a10608 by task insmod/256
CPU: 0 PID: 256 Comm: insmod Tainted: G O 5.2.0-rc4 #1
Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0
Call trace:
dump_backtrace+0x0/0x1e8
show_stack+0x14/0x20
dump_stack+0xc4/0xfc
print_address_description+0x60/0x270
__kasan_report+0x164/0x1b8
kasan_report+0xc/0x18
__asan_load8+0x84/0xa8
hns_roce_v2_init_eq_table+0x1324/0x1948 [hns_roce_hw_v2]
hns_roce_init+0xf8/0xfe0 [hns_roce]
__hns_roce_hw_v2_init_instance+0x284/0x330 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0xd0/0x1b8 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x180/0x310 [hclge]
hclge_init_client_instance+0xcc/0x508 [hclge]
hnae3_init_client_instance.part.3+0x3c/0x80 [hnae3]
hnae3_register_client+0x134/0x1a8 [hnae3]
hns_roce_hw_v2_init+0x14/0x10000 [hns_roce_hw_v2]
do_one_initcall+0x9c/0x3e0
do_init_module+0xd4/0x2d8
load_module+0x3284/0x3690
__se_sys_init_module+0x274/0x308
__arm64_sys_init_module+0x40/0x50
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Allocated by task 256:
__kasan_kmalloc.isra.0+0xd0/0x180
kasan_kmalloc+0xc/0x18
__kmalloc+0x16c/0x328
hns_roce_v2_init_eq_table+0x764/0x1948 [hns_roce_hw_v2]
hns_roce_init+0xf8/0xfe0 [hns_roce]
__hns_roce_hw_v2_init_instance+0x284/0x330 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0xd0/0x1b8 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x180/0x310 [hclge]
hclge_init_client_instance+0xcc/0x508 [hclge]
hnae3_init_client_instance.part.3+0x3c/0x80 [hnae3]
hnae3_register_client+0x134/0x1a8 [hnae3]
hns_roce_hw_v2_init+0x14/0x10000 [hns_roce_hw_v2]
do_one_initcall+0x9c/0x3e0
do_init_module+0xd4/0x2d8
load_module+0x3284/0x3690
__se_sys_init_module+0x274/0x308
__arm64_sys_init_module+0x40/0x50
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff8020e7a10600
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffff8020e7a10600, ffff8020e7a10680)
The buggy address belongs to the page:
page:ffff7fe00839e840 refcount:1 mapcount:0 mapping:ffff802340020200 index:0x0
flags: 0x5fffe00000000200(slab)
raw: 5fffe00000000200 dead000000000100 dead000000000200 ffff802340020200
raw: 0000000000000000 0000000081000100 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8020e7a10500: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
ffff8020e7a10580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8020e7a10600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff8020e7a10680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8020e7a10700: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-7-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
When exiting "for loop", the actual value of pi will be
increased by 1, which is compatible with the next calculation.
But when pi is equal to "ci + hr_cq-> ib_cq.cqe", the "break"
was called and the pi is actual value, it will lead one cqe
still existing, so the "==" should be modify to ">".
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-5-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
We should set IB_WC_WITH_VLAN only when VLAN is enabled.
In addition, move setting of IB_WC_WITH_SMAC below
setting of wc->smac.
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1565343666-73193-2-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
If we enabled alw_lcl_lpbk in promiscuous mode, packet whose source
and destination mac address is equal will be handled in both inner
loopback and outer loopback. This will halve performance of roce in
promiscuous mode.
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1565276034-97329-14-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Current prompt message is uncorrect when destroying qp, add qpn
information when creating qp.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-4-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function hns_roce_v2_cleanup_eq_table:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:5920:6:
warning: variable irq_num set but not used [-Wunused-but-set-variable]
It is not used since
commit 33db6f9484 ("RDMA/hns: Refactor eq table init for hip08")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190731073748.17664-1-yuehaibing@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
To make the code more readable, move the part of naming irq and request
irq out of eq table init into a separate function.
Link: https://lore.kernel.org/r/1562593285-8037-10-git-send-email-oulijun@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, more than 20 lines of duplicate code exist in function
'modify_qp_init_to_init' and function 'modify_qp_reset_to_init', which
affects the readability of the code. Consolidate them.
Link: https://lore.kernel.org/r/1562593285-8037-6-git-send-email-oulijun@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move some lines which exist hns_roce_v2_modify_qp function into a new
function. The code refactored mainly includes some absolute fields of qp
context and some optional fields of qp context.
Link: https://lore.kernel.org/r/1562593285-8037-4-git-send-email-oulijun@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Here Clean up unnecessary initial value for some variable.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When hw resetting, there is no response from hw when driver sending cmdq.
If driver still send cmdq to hw, the reset process may be blocked. So
reset flag should be set to intercept the cmdq command when driver
receiving "notify down" signal.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, the depth of cq only supports 64K. According to the UM, the
depth of cq is up to 4M, Therefore the ba page size of cqe was modified to
support the maximum specification of cq depth.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It uses hns_roce_mtr_init in hns_roce_create_qp_common function. As a
result, it should use hns_roce_mtr_cleanup function for cleaning mtr when
destroying qp.
Fixes: 8d18ad83f1 ("RDMA/hns: Fix bug when wqe num is larger than 16K")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function 'hns_roce_function_clear':
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:1135:7: warning:
variable 'fclr_write_fail_flag' set but not used [-Wunused-but-set-variable]
It is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In commit af7ddd8a62 ("Merge tag 'dma-mapping-4.21' of
git://git.infradead.org/users/hch/dma-mapping"),
dma_alloc_coherent/dmam_alloc_coherent always zeroed the returned memory.
So the memset after a coherent allocation function is not needed.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This function is supposed to return negative kernel error codes but here
it returns CMD_RST_PRC_EBUSY (2). The error code eventually gets passed
to IS_ERR() and since it's not an error pointer it leads to an Oops in
hns_roce_v1_rsv_lp_qp()
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Update ib_umem_release() to behave similarly to kfree() and allow
submitting NULL pointer as safe input to this function.
Fixes: a52c8e2469 ("RDMA: Clean destroy CQ in drivers do not return errors")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
During removing the driver, we needs to notify the roce engine to
stop working immediately,and symmetrically recycle the hardware
resources requested during initialization.
The hardware provides a command called function clear that can package
these operations,so that the driver can only focus on releasing
resources that applied from the operating system.
This patch implements the call of this command.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
hip08 can support up to 32768 wqes in one qp. currently if the wqe num
is larger than 16384, the driver will lead a calltrace as follows.
[21361.393725] Call trace:
[21361.398605] hns_roce_v2_modify_qp+0xbcc/0x1360 [hns_roce_hw_v2]
[21361.410627] hns_roce_modify_qp+0x1d8/0x2f8 [hns_roce]
[21361.420906] _ib_modify_qp+0x70/0x118
[21361.428222] ib_modify_qp+0x14/0x1c
[21361.435193] rt_ktest_modify_qp+0xb8/0x650 [rdma_test]
[21361.445472] exec_modify_qp_cmd+0x110/0x4d8 [rdma_test]
[21361.455924] rt_ktest_dispatch_cmd_3+0xa94/0x2edc [rdma_test]
[21361.467422] rt_ktest_dispatch_cmd_2+0x9c/0x108 [rdma_test]
[21361.478570] rt_ktest_dispatch_cmd+0x138/0x904 [rdma_test]
[21361.489545] rt_ktest_dev_write+0x328/0x4b0 [rdma_test]
[21361.499998] __vfs_write+0x38/0x15c
[21361.506966] vfs_write+0xa8/0x1a0
[21361.513586] ksys_write+0x50/0xb0
[21361.520206] sys_write+0xc/0x14
[21361.526479] el0_svc_naked+0x30/0x34
[21361.533622] Code: 1ac10841 d37d7c22 0b000021 d37df021 (f86268c0)
[21361.545815] ---[ end trace e2a1feb2c3d7f13c ]---
When the wqe num is larger than 16384, hns_roce_table_find will return an
invalid mtt, this will lead an kernel paging requet error if the driver try
to access it. It's the mtt design defect which can't support up to the max
wqe num of hip08.
This patch fixs it by replacing mtt with mtr for wqe.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When user post recv a srq with multiple sges, the hardware will get the
last correct sge and count the sge numbers according to the specific
identifier with lkey. For example, when the driver fills the sges with
every wr less than the max sge that the user configured when creating srq,
the hardware will stop getting the sge according to the specific lkey in
the sge. However, it will always end with the first sge in the current
post srq recv interface implementation.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When the user submits more than 32 work request to a srq queue
at a time, it needs to find the corresponding number of entries
in the bitmap in the idx queue. However, the original lookup
function named ffs only processes 32 bits of the array element,
When the number of srq wqe issued exceeds 32, the ffs will only
process the lower 32 bits of the elements, it will not be able
to get the correct wqe index for srq wqe.
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch makes the code more readable by removing magic numbers.
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to print when communication is established, especially
while lots of qp used by application.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of RoCE drivers figuring out vlan, smac fields while working on
QP/AH, provide a helper routine to read the L2 fields such as vlan_id and
source mac address.
This moves logic from mlx5 driver to core for wider usage for RoCE ports.
This is a preparation patch to allow detaching netdev in subsequent patch.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In mhop 0 mode, 64*bt_num queues can be supported.
In mhop 1 mode, 32K*bt_num queues can be supported.
Config srqc_hop_num to 1 to support 1M SRQ queues.
Signed-off-by: chenglang <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds support of resource track for hip08 and take dumping cq
context state used for debugging as an example. More resources track
supports for hns driver will be added in future.
The output should be as follows.
$ rdma res show cq dev hnseth0 -d
dev hnseth0 cqe 1023 users 2 poll-ctx WORKQUEUE pid 0 comm [ib_core] drv_state 2 drv_ceq
n 0 drv_cqn 0 drv_hopnum 1 drv_pi 0 drv_ci 0 drv_coalesce 0 drv_period 0 drv_cnt 0
Signed-off-by: Tao Tian <tiantao6@huawei.com>
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: chenglang <chenglang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that we have the udata passed to all the ib_xxx object destroy APIs
and the additional macro 'rdma_udata_to_drv_context' to get the
ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally
start to remove the dependency of the drivers in the
ib_xxx->uobject->context.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The uverbs_attr_bundle with the ucontext is sent down to the drivers ib_x
destroy path as ib_udata. The next patch will use the ib_udata to free the
drivers destroy path from the dependency in 'uobject->context' as we
already did for the create path.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The forgotten static keyword causes to the following error to appear while
building HNS driver. Declare hns_roce_cmq_send() to be static function to
fix this warning.
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:1089:5: warning: no previous
prototype for _hns_roce_cmq_send_ [-Wmissing-prototypes]
int hns_roce_cmq_send(struct hns_roce_dev *hr_dev,
Fixes: 6a04aed6af ("RDMA/hns: Fix the chip hanging caused by sending mailbox&CMQ during reset")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The src_mac array is not used in hns_roce_v2_modify_qp function.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
