i.MX93 LPCG is different from i.MX8M CCGR. Although imx_clk_hw_gate4_flags
is used here, it not strictly match i.MX93. i.MX93 has such design:
- LPCG_DIRECT use BIT0 as on/off gate when LPCG_AUTHEN CPU_LPM is 0
- LPCG_LPM_CUR use BIT[2:0] as on/off gate when LPCG_AUTHEN CPU_LPM is 1
The current implementation suppose CPU_LPM is 0, and use LPCG_DIRECT
BIT[1:0] as on/off gate. Although BIT1 is touched, actually BIT1 is
reserved.
And imx_clk_hw_gate4_flags use mask 0x3 to determine whether the clk
is enabled or not, but i.MX93 LPCG only use BIT0 to control when CPU_LPM
is 0. So clk disabled unused during kernel boot not able to gate off
the unused clocks.
To match i.MX93 LPCG, introduce imx93_clk_gate.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220830033137.4149542-6-peng.fan@oss.nxp.com
The CCM ROOT AUTHEN register WHITE_LIST indicate:
Each bit in this field represent for one domain. Bit16~Bit31 represent
for DOMAIN0~DOMAIN15 respectively. Only corresponding bit of the domains
is set to 1 can change the registers of this Clock Root.
i.MX93 DID is 3, so if BIT(3 + WHITE_LIST_SHIFT) is 0, the clk should be
set to read only. To make the imx93_clk_composite_flags be reusable,
add a new parameter named did(domain id);
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220830033137.4149542-5-peng.fan@oss.nxp.com
i.MX93 CCM ROOT STAT register has a SLICE_BUSY bit:
indication for clock generation logic is applying new setting.
0b - Clock generation logic is not busy.
1b - Clock generation logic is applying new setting.
So when set parent/rate/gate, need check this bit.
Introduce specific ops to do the work.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220830033137.4149542-4-peng.fan@oss.nxp.com
The enet_qos_root_clk takes sim_enet_root_clk as parent. When
registering enet_qos_root_clk, it will be put into clk orphan list,
because sim_enet_root_clk is not ready.
When sim_enet_root_clk is ready, clk_core_reparent_orphans_nolock will
set enet_qos_root_clk parent to sim_enet_root_clk.
Because CLK_OPS_PARENT_ENABLE is set, sim_enet_root_clk will be
enabled and disabled during the enet_qos_root_clk reparent phase.
All the above are correct. But with M7 booted early and using
enet, M7 enet feature will be broken, because clk driver probe phase
disable the needed clks, in case M7 firmware not configure
sim_enet_root_clk.
And tune the order would also save cpu cycles.
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220815013428.476015-1-peng.fan@oss.nxp.com
and prepare and enable them at the same time. This also comes with devm support
so that drivers can make a single call to get and prepare and enable the clk
and have that all undone when their driver is removed. Many folks have
requested this feature over the years, but we've had disagreements about how to
implement it and if it was worthwhile to encourage drivers to use such an API.
Now it's here, so let's see how it goes. I hope that by introducing this API we
can identify drivers that would benefit from further consolidation of clk API
usage, possibly by moving such logic to the bus layer and out of drivers
altogether.
Outside of that major API update, we have the usual collection of driver
updates. A few new SoCs are supported, mostly Qualcomm and Renesas this time
around. Then we have the long tail of non-critical fixes and minor feature
additions to various clk drivers. And finally more clk provider migration to
struct clk_parent_data, reducing boot times in the process.
Core:
- devm helpers for clk_get() + clk_prepare() and clk_enable()
New Drivers:
- Support for the camera clock controller in Qualcomm SM8450 and
the display and gpu clock controllers in Qualcomm SM8350
- Add support for the Renesas RZ/Five SoC
Updates:
- Various fixes, new clocks and USB GDSCs are introduced for Qualcomm IPQ8074
- Fixes to Qualcomm MSM8939 for issues introduced by inheriting the MSM8916
GCC driver
- Support for a new type of voteable GDSCs used by Qualcomm SC8280XP PCIe
GDSCs
- Qualcomm SC8280XP pipe clocks transitioned to the new phy-mux implementation
- Qualcomm MSM8996 GCC, RPM clock driver and some clocks in MSM8994 GCC are
migrated to use clk_parent_data
- Corrected the topology for Titan (camera) GDSCs on Qualcomm SDM845 and
SM8250
- Qualcomm MSM8916 gains more possible frequencies for its GP clocks.
- The GCC and tsens handling on Qualcomm MSM8960 is reworked to mimic the
design in IPQ8074 to allow the GCC driver to probe earlier.
- The regulator based mmcx supply for Qualcomm dispcc and videocc is dropped,
as the only upstream target that adapted this interface was transitioned
several kernel versions ago
- Qualcomm GDSCs found to be enabled at boot will now reflect in the enable
count of the supply, as was done with the regulator supplies previously
- Correct adc1, nic_media and edma1's parents for NXP i.MX93
- rdiv, mfd values, the return rate in recalc_rate and add more frequencies in
the table for fracn-gppll on i.MX
- Remove Allwinner workaround logic/compatible in fixed factor code
- MediaTek clk driver cleanups
- Add reset support to more MediaTek clk drivers
- deduplicate Allwinner ccu_clks arrays
- Allwinner H6 GPU DFS support
- Adjust Allwinner Kconfig to limit choice
- Fix initconst confusion on Renesas R-Car Gen4
- Add GPT/POEG (PWM) clocks and resets on Renesas RZ/G2L
- Add PFC and WDT clocks and resets on Renesas RZ/V2M
- Add thermal, SDHI, Z (CPU core), PCIe, and HSCIF (serial) clocks on
Renesas R-Car S4-8
-----BEGIN PGP SIGNATURE-----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=jUh+
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The clk core gains a new set of APIs that allow drivers to both
acquire clks and prepare and enable them at the same time. This also
comes with devm support so that drivers can make a single call to get
and prepare and enable the clk and have that all undone when their
driver is removed.
Many folks have requested this feature over the years, but we've had
disagreements about how to implement it and if it was worthwhile to
encourage drivers to use such an API.
Now it's here, so let's see how it goes.
I hope that by introducing this API we can identify drivers that would
benefit from further consolidation of clk API usage, possibly by
moving such logic to the bus layer and out of drivers altogether.
Outside of that major API update, we have the usual collection of
driver updates. A few new SoCs are supported, mostly Qualcomm and
Renesas this time around. Then we have the long tail of non-critical
fixes and minor feature additions to various clk drivers.
And finally more clk provider migration to struct clk_parent_data,
reducing boot times in the process.
Summary:
Core:
- devm helpers for clk_get() + clk_prepare() and clk_enable()
New Drivers:
- Support for the camera clock controller in Qualcomm SM8450 and the
display and gpu clock controllers in Qualcomm SM8350
- Add support for the Renesas RZ/Five SoC
Updates:
- Various fixes, new clocks and USB GDSCs are introduced for Qualcomm
IPQ8074
- Fixes to Qualcomm MSM8939 for issues introduced by inheriting the
MSM8916 GCC driver
- Support for a new type of voteable GDSCs used by Qualcomm SC8280XP
PCIe GDSCs
- Qualcomm SC8280XP pipe clocks transitioned to the new phy-mux
implementation
- Qualcomm MSM8996 GCC, RPM clock driver and some clocks in MSM8994
GCC are migrated to use clk_parent_data
- Corrected the topology for Titan (camera) GDSCs on Qualcomm SDM845
and SM8250
- Qualcomm MSM8916 gains more possible frequencies for its GP clocks.
- The GCC and tsens handling on Qualcomm MSM8960 is reworked to mimic
the design in IPQ8074 to allow the GCC driver to probe earlier.
- The regulator based mmcx supply for Qualcomm dispcc and videocc is
dropped, as the only upstream target that adapted this interface
was transitioned several kernel versions ago
- Qualcomm GDSCs found to be enabled at boot will now reflect in the
enable count of the supply, as was done with the regulator supplies
previously
- Correct adc1, nic_media and edma1's parents for NXP i.MX93
- rdiv, mfd values, the return rate in recalc_rate and add more
frequencies in the table for fracn-gppll on i.MX
- Remove Allwinner workaround logic/compatible in fixed factor code
- MediaTek clk driver cleanups
- Add reset support to more MediaTek clk drivers
- deduplicate Allwinner ccu_clks arrays
- Allwinner H6 GPU DFS support
- Adjust Allwinner Kconfig to limit choice
- Fix initconst confusion on Renesas R-Car Gen4
- Add GPT/POEG (PWM) clocks and resets on Renesas RZ/G2L
- Add PFC and WDT clocks and resets on Renesas RZ/V2M
- Add thermal, SDHI, Z (CPU core), PCIe, and HSCIF (serial) clocks on
Renesas R-Car S4-8"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (124 commits)
clk: fixed-factor: Introduce *clk_hw_register_fixed_factor_parent_hw()
clk: mux: Introduce devm_clk_hw_register_mux_parent_hws()
clk: divider: Introduce devm_clk_hw_register_divider_parent_hw()
clk: qcom: gcc-msm8994: use parent_hws for gpll0/4
clk: qcom: clk-rpm: convert to parent_data API
dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc
clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies
clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies
clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies
clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions
clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock
clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk
clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled
clk: qcom: Drop mmcx gdsc supply for dispcc and videocc
clk: qcom: fix build error initializer element is not constant
clk: sprd: Add dt-bindings include file for UMS512
dt-bindings: clk: sprd: Add bindings for ums512 clock controller
clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS
dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sources
clk: qcom: add support for SM8350 DISPCC
...
Highlights:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop Studio
- thinkpad_acpi: AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Fix acpi_video_handles_brightness_key_presses()
- video: Change how we determine if brightness key-presses are handled
Documentation/ABI:
- Add new attributes for mlxreg-io sysfs interfaces
- mlxreg-io: Fix contact info
Drop the PMC_ATOM Kconfig option:
- Drop the PMC_ATOM Kconfig option
EDAC, pnd2:
- convert to use common P2SB accessor
- Use proper I/O accessors and address space annotation
HID:
- surface-hid: Add support for hot-removal
ISST:
- PUNIT device mapping with Sub-NUMA clustering
Kconfig:
- Remove unnecessary "if X86"
MAINTAINERS:
- repair file entry in MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH
Merge tag 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-v5.20' into review-hans:
- Merge tag 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-v5.20' into review-hans
Move AMD platform drivers to separate directory:
- Move AMD platform drivers to separate directory
acer-wmi:
- Use backlight helper
acer_wmi:
- Cleanup Kconfig selects
apple-gmux:
- Use backlight helper
asus-wmi:
- Add mic-mute LED classdev support
- Add key mappings
compal-laptop:
- Use backlight helper
efi:
- Fix efi_power_off() not being run before acpi_power_off() when necessary
gigabyte-wmi:
- add support for B660I AORUS PRO DDR4
hp-wmi:
- Ignore Sanitization Mode event
i2c:
- i801: convert to use common P2SB accessor
ideapad-laptop:
- Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[]
- Add allow_v4_dytc module parameter
intel/pmc:
- Add Alder Lake N support to PMC core driver
intel_atomisp2_led:
- Also turn off the always-on camera LED on the Asus T100TAF
leds:
- simatic-ipc-leds-gpio: Add GPIO version of Siemens driver
- simatic-ipc-leds: Convert to use P2SB accessor
mfd:
- lpc_ich: Add support for pinctrl in non-ACPI system
- lpc_ich: Switch to generic p2sb_bar()
- lpc_ich: Factor out lpc_ich_enable_spi_write()
mlx-platform:
- Add COME board revision register
- Add support for new system XH3000
- Introduce support for COMe NVSwitch management module for Vulcan chassis
- Add support for systems equipped with two ASICs
- Add cosmetic changes for alignment
- Make activation of some drivers conditional
p2sb:
- Move out of X86_PLATFORM_DEVICES dependency
panasonic-laptop:
- Use acpi_video_get_backlight_type()
- filter out duplicate volume up/down/mute keypresses
- don't report duplicate brightness key-presses
- revert "Resolve hotkey double trigger bug"
- sort includes alphabetically
- de-obfuscate button codes
pinctrl:
- intel: Check against matching data instead of ACPI companion
platform/mellanox:
- mlxreg-lc: Fix error flow and extend verbosity
- mlxreg-io: Add locking for io operations
- nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices()
platform/olpc:
- Fix uninitialized data in debugfs write
platform/surface:
- gpe: Add support for 13" Intel version of Surface Laptop 4
- tabletsw: Fix __le32 integer access
- Update copyright year of various drivers
- aggregator: Move subsystem hub drivers to their own module
- aggregator: Move device registry helper functions to core module
- aggregator_registry: Add support for tablet mode switch on Surface Laptop Studio
- aggregator_registry: Add support for tablet mode switch on Surface Pro 8
- Add KIP/POS tablet-mode switch driver
- aggregator: Add helper macros for requests with argument and return value
- aggregator: Reserve more event- and target-categories
- avoid flush_scheduled_work() usage
- aggregator_registry: Add support for keyboard cover on Surface Pro 8
- aggregator_registry: Add KIP device hub
- aggregator_registry: Change device ID for base hub
- aggregator_registry: Generify subsystem hub functionality
- aggregator: Add comment for KIP subsystem category
- aggregator_registry: Use client device wrappers for notifier registration
- aggregator: Allow notifiers to avoid communication on unregistering
- aggregator: Allow devices to be marked as hot-removed
- aggregator: Allow is_ssam_device() to be used when CONFIG_SURFACE_AGGREGATOR_BUS is disabled
platform/x86/amd/pmc:
- Add new platform support
- Add new acpi id for PMC controller
platform/x86/dell:
- Kconfig: Remove unnecessary "depends on X86_PLATFORM_DEVICES"
platform/x86/intel:
- Add Primary to Sideband (P2SB) bridge support
platform/x86/intel/ifs:
- Mark as BROKEN
platform/x86/intel/pmt:
- telemetry: Fix fixed region handling
platform/x86/intel/vsec:
- Fix wrong type for local status variables
- Add PCI error recovery support to Intel PMT
- Add support for Raptor Lake
- Rework early hardware code
pmc_atom:
- Fix comment typo
- Match all Lex BayTrail boards with critclk_systems DMI table
power/supply:
- surface_battery: Use client device wrappers for notifier registration
- surface_charger: Use client device wrappers for notifier registration
serial-multi-instantiate:
- Sort ACPI IDs by HID
- Get rid of redundant 'else'
- Use while (i--) pattern to clean up
- Improve dev_err_probe() messaging
- Drop duplicate check
- Improve autodetection
simatic-ipc:
- drop custom P2SB bar code
sony-laptop:
- Remove useless comparisons in sony_pic_read_possible_resource()
system76_acpi:
- Use dev_get_drvdata
thinkpad_acpi:
- Enable AMT by default on supported systems
- Add support for hotkey 0x131a
- Add support for automatic mode transitions
- profile capabilities as integer
- do not use PSC mode on Intel platforms
- Fix a memory leak of EFCH MMIO resource
- Replace custom str_on_off() etc
- Sort headers for better maintenance
- Use backlight helper
tools/power/x86/intel-speed-select:
- Remove unneeded semicolon
- Fix off by one check
watchdog:
- simatic-ipc-wdt: convert to use P2SB accessor
x86-android-tablets:
- Fix Lenovo Yoga Tablet 2 830/1050 poweroff again
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmLrndEUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zeMgf7BjSCz6ZA8SSY1i8QHDTvdjySihHJ
j07Gn3j1T/5G00R/r6viMDE4PxcYvMAPXjq3azepKQd8H5kGfE323SA6fgWFPAvi
P2OvEfvWfI5S8FYGYPBkNP2MjQ5MFe7qzLEh3+wQH0ocJ7WRCi457B4Xvtd2gWI3
dHj5gMSWC3O5xNa2S4Mg3dnD9uJlwhX+FNjWIuRy8eh5+DikgByyC4B+uW6WtO5e
t0rmIm6q5wUzB7dIetJLoAQwrcpYAOkK7L33G9h/7knWAfiJfklaKTbftnoxbDSv
iGWODkLDyob4C48DmVusS6WMEhPUzl/R33+tk6LjVt/YOYOP030EMtCECQ==
=Krhc
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop
Studio
- thinkpad_acpi:
- AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
* tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits)
platform/x86/intel/vsec: Fix wrong type for local status variables
platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency
platform/x86: pmc_atom: Fix comment typo
platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4
platform/olpc: Fix uninitialized data in debugfs write
platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity
platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table
platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource()
tools/power/x86/intel-speed-select: Remove unneeded semicolon
tools/power/x86/intel-speed-select: Fix off by one check
platform/surface: tabletsw: Fix __le32 integer access
Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces
Documentation/ABI: mlxreg-io: Fix contact info
platform/mellanox: mlxreg-io: Add locking for io operations
platform/x86: mlx-platform: Add COME board revision register
platform/x86: mlx-platform: Add support for new system XH3000
platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis
platform/x86: mlx-platform: Add support for systems equipped with two ASICs
platform/x86: mlx-platform: Add cosmetic changes for alignment
platform/x86: mlx-platform: Make activation of some drivers conditional
...
Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text. Also included in here are a few other minor updates,
2 USB files, and one Documentation file update to get the SPDX lines
correct.
All of these have been in the linux-next tree for a very long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYupz3g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynPUgCgslaf2ssCgW5IeuXbhla+ZBRAzisAnjVgOvLN
4AKdqbiBNlFbCroQwmeQ
=v1sg
-----END PGP SIGNATURE-----
Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
This KUnit update for Linux 5.20-rc1 consists of several fixes and an
important feature to discourage running KUnit tests on production
systems. Running tests on a production system could leave the system
in a bad state. This new feature adds:
- adds a new taint type, TAINT_TEST to signal that a test has been run.
This should discourage people from running these tests on production
systems, and to make it easier to tell if tests have been run
accidentally (by loading the wrong configuration, etc.)
- several documentation and tool enhancements and fixes.
-----BEGIN PGP SIGNATURE-----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=WzBX
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"This consists of several fixes and an important feature to discourage
running KUnit tests on production systems. Running tests on a
production system could leave the system in a bad state.
Summary:
- Add a new taint type, TAINT_TEST to signal that a test has been
run.
This should discourage people from running these tests on
production systems, and to make it easier to tell if tests have
been run accidentally (by loading the wrong configuration, etc)
- Several documentation and tool enhancements and fixes"
* tag 'linux-kselftest-kunit-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
Documentation: KUnit: Fix example with compilation error
Documentation: kunit: Add CLI args for kunit_tool
kcsan: test: Add a .kunitconfig to run KCSAN tests
kunit: executor: Fix a memory leak on failure in kunit_filter_tests
clk: explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in .kunitconfig
mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro
nitro_enclaves: test: Use kunit_test_suite() macro
thunderbolt: test: Use kunit_test_suite() macro
kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites
kunit: unify module and builtin suite definitions
selftest: Taint kernel when test module loaded
module: panic: Taint the kernel when selftest modules load
Documentation: kunit: fix example run_kunit func to allow spaces in args
Documentation: kunit: Cleanup run_wrapper, fix x-ref
kunit: test.h: fix a kernel-doc markup
kunit: tool: Enable virtio/PCI by default on UML
kunit: tool: make --kunitconfig repeatable, blindly concat
kunit: add coverage_uml.config to enable GCOV on UML
kunit: tool: refactor internal kconfig handling, allow overriding
kunit: tool: introduce --qemu_args
...
* clk-allwinner:
clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS
clk: sunxi: Do not select the PRCM MFD
clk: sunxi: Limit legacy clocks to 32-bit ARM
clk: sunxi-ng: Deduplicate ccu_clks arrays
- Remove allwinner workaround logic/compatible in fixed factor code
- MediaTek clk driver cleanups
- Add reset support to more MediaTek clk drivers
- devm helpers for clk_get() + clk_prepare() and clk_enable()
* clk-basic:
clk: fixed-factor: Introduce *clk_hw_register_fixed_factor_parent_hw()
clk: mux: Introduce devm_clk_hw_register_mux_parent_hws()
clk: divider: Introduce devm_clk_hw_register_divider_parent_hw()
dt-bindings: clock: fixed-factor: Drop Allwinner A10 compatible
clk: fixed: Remove Allwinner A10 special-case logic
* clk-mtk:
clk: mediatek: reset: Add infra_ao reset support for MT8186
dt-bindings: arm: mediatek: Add #reset-cells property for MT8186
dt-bindings: reset: mediatek: Add infra_ao reset index for MT8186
clk: mediatek: reset: Add infra_ao reset support for MT8192/MT8195
dt-bindings: reset: mediatek: Add infra_ao reset index for MT8192/MT8195
dt-bindings: arm: mediatek: Add #reset-cells property for MT8192/MT8195
clk: mediatek: reset: Add reset support for simple probe
clk: mediatek: reset: Add new register reset function with device
clk: mediatek: reset: Change return type for clock reset register function
clk: mediatek: reset: Support inuput argument index mode
clk: mediatek: reset: Support nonsequence base offsets of reset registers
clk: mediatek: reset: Revise structure to control reset register
clk: mediatek: reset: Merge and revise reset register function
clk: mediatek: reset: Extract common drivers to update function
clk: mediatek: reset: Refine and reorder functions in reset.c
clk: mediatek: reset: Fix written reset bit offset
clk: mediatek: reset: Add reset.h
clk: mediatek: Delete MT8192 msdc gate
dt-bindings: ARM: Mediatek: Remove msdc binding of MT8192 clock
* clk-devm-enable:
clk: Remove never used devm_clk_*unregister()
clk: Fix pointer casting to prevent oops in devm_clk_release()
clk: meson: axg-audio: Don't duplicate devm_clk_get_enabled()
clk: Provide new devm_clk helpers for prepared and enabled clocks
clk: generalize devm_clk_get() a bit
clk: Improve documentation for devm_clk_get() and its optional variant
* clk-ti-dt:
clk: ti: Stop using legacy clkctrl names for omap4 and 5
The SoC driver updates contain changes to improve support for
additional SoC variants, as well as cleanups an minor bugfixes
in a number of existing drivers.
Notable updates this time include:
- Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers
- Updates for interconnect drivers on Qualcomm Snapdragon
- A new driver support for NMI interrupts on Fujitsu A64fx
- A rework of Broadcom BCMBCA Kconfig dependencies
- Improved support for BCM2711 (Raspberry Pi 4) power management
to allow the use of the V3D GPU
- Cleanups to the NXP guts driver
- Arm SCMI firmware driver updates to add tracing support, and
use the firmware interfaces for system power control and for
power capping.
-----BEGIN PGP SIGNATURE-----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=0dZI
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC drivers from Arnd Bergmann:
"The SoC driver updates contain changes to improve support for
additional SoC variants, as well as cleanups an minor bugfixes
in a number of existing drivers.
Notable updates this time include:
- Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers
- Updates for interconnect drivers on Qualcomm Snapdragon
- A new driver support for NMI interrupts on Fujitsu A64fx
- A rework of Broadcom BCMBCA Kconfig dependencies
- Improved support for BCM2711 (Raspberry Pi 4) power management to
allow the use of the V3D GPU
- Cleanups to the NXP guts driver
- Arm SCMI firmware driver updates to add tracing support, and use
the firmware interfaces for system power control and for power
capping"
* tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (125 commits)
soc: a64fx-diag: disable modular build
dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller
dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp
dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config
ARM: mach-qcom: Add support for MSM8909
dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method
soc: qcom: spm: Add CPU data for MSM8909
dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible
soc: qcom: rpmpd: Add compatible for MSM8909
dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains
soc: qcom: smd-rpm: Add compatible for MSM8909
dt-bindings: soc: qcom: smd-rpm: Add MSM8909
soc: qcom: icc-bwmon: Remove unnecessary print function dev_err()
soc: fujitsu: Add A64FX diagnostic interrupt driver
soc: qcom: socinfo: Fix the id of SA8540P SoC
soc: qcom: Make QCOM_RPMPD depend on PM
tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
...
Add the devres and non-devres variant of
clk_hw_register_fixed_factor_parent_hw() for registering a fixed factor
clock with clk_hw parent pointer instead of parent name.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20220629225331.357308-4-marijn.suijten@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The register address used for the clock gate register is the base
register address coming from first reg map (ie. the generic
clock registers) instead of the second reg map defining the clock
gate register.
Use the correct clock gate register address.
Fixes: 5ad5915dea ("clk: lan966x: Extend lan966x clock driver for clock gating support")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20220704102845.168438-2-herve.codina@bootlin.com
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert clk-rpm driver to parent_data API.
We keep the old pxo/cxo_board parent naming to keep compatibility with
old DT and we use the new pxo/cxo for new implementation where these
clock are defined in DTS.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706225321.26215-4-ansuelsmth@gmail.com
The Venus clock frequencies are a copy/paste error from msm8916. Looking
at the original clock-gcc-8936.c ftbl_gcc_venus0_vcodec0_clk defines we
have:
- 133 MHz
- 200 MHz
- 266 MHz
These values are born out by the relevant qualcomm documentation for the
msm8936/msm8939 Venus core performance levels.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220712125922.3461675-4-bryan.odonoghue@linaro.org
Standard CCI bus clock clocks are 19.2 MHz and 37.5 MHz. We already define
the 19.2 MHz but are missing the 37.5 MHz.
See qcom kernel drivers/clk/qcom/clock-gcc-8936.c::ftbl_gcc_camss_cci_clk[]
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220712125922.3461675-3-bryan.odonoghue@linaro.org
Adding a new item to this frequency table I see the existing indentation is
incorrect.
Fixes: 1664014e46 ("clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220712125922.3461675-2-bryan.odonoghue@linaro.org
When a GDSC is found to be enabled at boot the pm_runtime state will
be unbalanced as the GDSC is later turned off. Fix this by increasing
the usage counter on the power-domain, in line with how we handled the
regulator state.
Fixes: 1b771839de ("clk: qcom: gdsc: enable optional power domain support")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220713212818.130277-1-bjorn.andersson@linaro.org
Both dispcc and videocc use mmcx power domain now.
Lets drop the supply mmcx from every gdsc.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 266e5cf39a ("arm64: dts: qcom: sm8250: remove mmcx regulator")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220713143200.3686765-1-abel.vesa@linaro.org
CONFIG_CC_VERSION_TEXT="x86_64-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0"
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-, will be failed, like this:
drivers/clk/qcom/gpucc-sm8350.c:111:2: error: initializer element is not constant
gpu_cc_parent,
^~~~~~~~~~~~~
drivers/clk/qcom/gpucc-sm8350.c:111:2: note: (near initialization for ‘gpu_cc_parent_data_0[0]’)
drivers/clk/qcom/gpucc-sm8350.c:126:2: error: initializer element is not constant
gpu_cc_parent,
^~~~~~~~~~~~~
drivers/clk/qcom/gpucc-sm8350.c:126:2: note: (near initialization for ‘gpu_cc_parent_data_1[0]’)
make[3]: *** [drivers/clk/qcom/gpucc-sm8350.o] Error 1
It seems that nested constant initializer is not supported in GCC 7.4.0. For portability resons, we should fix it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 160758b05a ("clk: qcom: add support for SM8350 GPUCC")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220714121144.71062-1-renzhijie2@huawei.com
CONFIG_UML_PCI_OVER_VIRTIO=y is needed to enable CONFIG_PCI=y on UML.
However, this causes test failures when running the clk tests, i.e.
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk
A snippet of the particular error is:
> ok 1 - clk_gate_test_parent_rate
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 45 at lib/logic_iomem.c:141 __raw_readl+0x9f/0xd0
This is triggered by this cast in the test:
143 ctx->fake_mem = (void __force __iomem *)&ctx->fake_reg;
this seems to work except when logic iomem is enabled, i.e.
CONFIG_INDIRECT_IOMEM=y.
As a short-term fix, explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in
drivers/clk/.kunitconfig so we can enable it for everyone else by
default in kunit.py.
The long-term fix probably requires something more complicated, like
#ifdef CONFIG_INDIRECT_IOMEM
logic_iomem_add_region(...);
#endif
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reported-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make
CLK_BCM_63XX depending and setting default on ARCH_BCMBCA.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Using simple bash script it was discovered that not all CCU registers
can be safely used for DFS, e.g.:
while true
do
devmem 0x3001030 4 0xb0003e02
devmem 0x3001030 4 0xb0001e02
done
Script above changes the GPU_PLL multiplier register value. While the
script is running, the user should interact with the user interface.
Using this method the following results were obtained:
| Register | Name | Bits | Values | Result |
| -- | -- | -- | -- | -- |
| 0x3001030 | GPU_PLL.MULT | 15..8 | 20-62 | OK |
| 0x3001030 | GPU_PLL.INDIV | 1 | 0-1 | OK |
| 0x3001030 | GPU_PLL.OUTDIV | 0 | 0-1 | FAIL |
| 0x3001670 | GPU_CLK.DIV | 3..0 | ANY | FAIL |
DVFS started to work seamlessly once dividers which caused the
glitches were set to fixed values.
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220705075226.359475-1-r.stratiienko@gmail.com
Add support to the SM8350 display clock controller by extending the SM8250
display clock controller, which is almost identical but has some minor
differences.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706154337.2026269-5-robert.foss@linaro.org
The GPUCC manages the clocks for the Adreno GPU found on the
sm8350 SoCs.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706154337.2026269-3-robert.foss@linaro.org
Add and export Rivian EVO PLL configuration and control functions to
clock controller drivers, the PLL is used by SM8450 camera clock
controller.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062739.2757912-1-vladimir.zapolskiy@linaro.org
Add controls for Lucid EVO PLL configuration and export control functions
to clock controller drivers, the PLL is used by Qualcomm SM8450 camera
and display clock controllers.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062729.2757893-1-vladimir.zapolskiy@linaro.org
After merging lucid and trion pll functions in commit 0b01489475
("clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid")
the function clk_trion_pll_configure() is left with an old description
header, which results in a W=2 compile time warning, fix it.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062711.2757855-1-vladimir.zapolskiy@linaro.org
A variable pointing to const isn't const itself. It'd have to contain
"const" keyword after "*" too. Therefore, cpg_pll_config cannot be put
to "rodata". Hence use __initdata instead of __initconst to fix this.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[js] more explanatory commit message.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220623083217.26433-2-jslaby@suse.cz
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Renesas RZ/Five SoC has almost the same clock structure compared to the
Renesas RZ/G2UL SoC, re-use the r9a07g043-cpg.c file to add support for
RZ/Five SoC.
This patch splits up the clocks and reset arrays for RZ/G2UL and RZ/Five
SoC using #ifdef CONFIG_ARM64 and #ifdef CONFIG_RISCV checks.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220622181723.13033-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Currently gcc-msm8960 driver manually creates tsens platform device
manually. It would be better to follow IPQ8064 approach, where tsens
device is defined as gcc's child device in the device tree. If nothing
else, it removes gcc's dependency on QFPROM, thus allowing clock
controller to be probed earlier.
Don't create it in case there are available child nodes (tsens) inside
the gcc's device tree node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521151437.1489111-4-dmitry.baryshkov@linaro.org
The PRCM MFD driver is already selected by the two platforms where it is
actually used (MACH_SUN6I and MACH_SUN8I). Selecting it here builds it
unnecessarily on the rest of the Allwinner platforms.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702190135.51744-2-samuel@sholland.org
The sunxi legacy clocks were never compatible with any 64-bit SoC,
so there is no point in building them as part of a 64-bit ARM kernel.
They make even less sense being built in to a 64-bit RISC-V kernel.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702190135.51744-1-samuel@sholland.org
msm8916 has (at least) 6 "General Purpose" clocks that can be muxed to
SoC pins. These clocks are:
GP_CLK{0, 1} : GPIO_{31, 32} (Belongs to CAMSS according to Linux)
GP_CLK_{1-3}{A, B} : GPIO_{49-51, 97, 12, 13} (Belongs to GCC itself)
GP_MN : GPIO_110 (Doesn't seem to be described in gcc,
ignored in this patch)
Those clocks may be used as e.g. PWM sources for external peripherals.
Add more frequencies to the table for those clocks so it's possible
for arbitrary peripherals to make use of them.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220612145955.385787-5-nikita@trvn.ru
Sometimes calculation of d value may result in 0 because of the
rounding after integer division. This causes the following error:
[ 113.969689] camss_gp1_clk_src: rcg didn't update its configuration.
[ 113.969754] WARNING: CPU: 3 PID: 35 at drivers/clk/qcom/clk-rcg2.c:122 update_config+0xc8/0xdc
Make sure that D value is never zero.
Fixes: 7f891faf59 ("clk: qcom: clk-rcg2: Add support for duty-cycle for RCG")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220612145955.385787-3-nikita@trvn.ru
In cases when MND is not enabled (e.g. when only Half Integer Divider is
used), setting D registers makes no effect.
Fail instead of making ineffective write.
Fixes: 7f891faf59 ("clk: qcom: clk-rcg2: Add support for duty-cycle for RCG")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220612145955.385787-2-nikita@trvn.ru
On SM8250 two found VFE GDSC power domains shall not be operated, if
titan top is turned off, thus the former power domains will be set as
subdomains by a GDSC registration routine.
Fixes: 5d66ca79b5 ("clk: qcom: Add camera clock controller driver for SM8250")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519214133.1728979-3-vladimir.zapolskiy@linaro.org
On SDM845 two found VFE GDSC power domains shall not be operated, if
titan top is turned off, thus the former power domains will be set as
subdomains by a GDSC registration routine.
Fixes: 78412c2620 ("clk: qcom: Add camera clock controller driver for SDM845")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519214133.1728979-2-vladimir.zapolskiy@linaro.org
Currently, attempting to enable the UBI clocks will cause the stuck at
off warning to be printed and clk_enable will fail.
[ 14.936694] gcc_ubi1_ahb_clk status stuck at 'off'
Downstream 5.4 QCA kernel has fixed this by seting the BRANCH_HALT_DELAY
flag on UBI clocks, so lets do the same.
Fixes: 5736294aef ("clk: qcom: ipq8074: add NSS clocks")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-6-robimarko@gmail.com
