In commit b45f0674b9 ("mlx4: xdp: Allow raising MTU up to one page minus eth and vlan hdrs"),
it changed EOPNOTSUPP to ENOTSUPP by mistake. This patch fixes it.
Fixes: b45f0674b9 ("mlx4: xdp: Allow raising MTU up to one page minus eth and vlan hdrs")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit e53743994e
("af_iucv: use paged SKBs for big outbound messages"),
we transmit paged skbs for both of AF_IUCV's transport modes
(IUCV or HiperSockets).
The qeth driver for Layer 3 HiperSockets currently doesn't
support NETIF_F_SG, so these skbs would just be linearized again
by the stack.
Avoid that overhead by using paged skbs only for IUCV transport.
cc stable, since this also circumvents a significant skb leak when
sending large messages (where the skb then needs to be linearized).
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> # v4.8+
Fixes: e53743994e ("af_iucv: use paged SKBs for big outbound messages")
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit bdabad3e36 ("net: Add Qualcomm IPC router") introduced a
new address family. Update the family name tables accordingly so
that the lockdep initialization can use the proper names for this
family.
Cc: Courtney Cavin <courtney.cavin@sonymobile.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Failure to mark this pointer as __le32 causes checkers like
sparse to complain:
net/qrtr/qrtr.c:274:16: warning: incorrect type in assignment (different base types)
net/qrtr/qrtr.c:274:16: expected unsigned int [unsigned] [usertype] <noident>
net/qrtr/qrtr.c:274:16: got restricted __le32 [usertype] <noident>
net/qrtr/qrtr.c:275:16: warning: incorrect type in assignment (different base types)
net/qrtr/qrtr.c:275:16: expected unsigned int [unsigned] [usertype] <noident>
net/qrtr/qrtr.c:275:16: got restricted __le32 [usertype] <noident>
net/qrtr/qrtr.c:276:16: warning: incorrect type in assignment (different base types)
net/qrtr/qrtr.c:276:16: expected unsigned int [unsigned] [usertype] <noident>
net/qrtr/qrtr.c:276:16: got restricted __le32 [usertype] <noident>
Silence it.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is perfectly possible to have non zero indexed switches being present
in a DSA switch tree, in such a case, we will be deferencing a NULL
pointer while dsa_cpu_port_ethtool_{setup,restore}. Be more defensive
and ensure that dst->ds[0] is valid before doing anything with it.
Fixes: 0c73c523cf ("net: dsa: Initialize CPU port ethtool ops per tree")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This update consists of fixes to use shell instead of bash to run tests
in embedded devices where the only shell available is the busybox ash.
Also included is a typo fix to a test result message.
-----BEGIN PGP SIGNATURE-----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=GjQN
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.10-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This update consists of fixes to use shell instead of bash to run
tests in embedded devices where the only shell available is the
busybox ash.
Also included is a typo fix to a test result message"
* tag 'linux-kselftest-4.10-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: x86/pkeys: fix spelling mistake: "itertation" -> "iteration"
selftests: do not require bash to run netsocktests testcase
selftests: do not require bash to run bpf tests
selftests: do not require bash for the generated test
If blk_mq_init_queue() returns an error, it gets assigned to
vblk->disk->queue. Then, when we call put_disk(), we end up calling
blk_put_queue() with the ERR_PTR, causing a bad dereference. Fix it by
only assigning to vblk->disk->queue on success.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Additionally, don't assign directly to disk->queue, otherwise
blk_put_queue (called via put_disk) will choke (panic) on the errno
stored there.
Bug found by code inspection after Omar found a similar issue in
virtio_blk. Compile-tested only.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Most users of BLOCK_PC requests allocate the sense buffer on the stack,
so to avoid DMA to the stack copy them to a field in the heap allocated
virtblk_req structure. Without that any attempt at SCSI passthrough I/O,
including the SG_IO ioctl from userspace will crash the kernel. Note that
this includes running tools like hdparm even when the host does not have
SCSI passthrough enabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Jens Axboe <axboe@fb.com>
The code currently uses sdio->blkbits to compute the number of blocks to
be cleaned. However sdio->blkbits is derived from the logical block size
of the underlying block device (Refer to the definition of
do_blockdev_direct_IO()). Due to this, generic/299 test would rarely
fail when executed on an ext4 filesystem with 64k as the block size and
when using a virtio based disk (having 512 byte as the logical block
size) inside a kvm guest.
This commit fixes the bug by using inode->i_blkbits to compute the
number of blocks to be cleaned.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixed up by Jeff Moyer to only use/evaluate inode->i_blkbits once,
to avoid issues with block size changes with IO in flight.
Signed-off-by: Jens Axboe <axboe@fb.com>
Removes following sparse complain :
net/core/flow_dissector.c:70:8: warning: symbol 'skb_flow_get_be16'
was not declared. Should it be static?
Fixes: 972d3876fa ("flow dissector: ICMP support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If srp_transfer_data fails within ibmvscsis_write_pending, then
the most likely scenario is that the client timed out the op and
removed the TCE mapping. Thus it will loop forever retrying the
op that is pretty much guaranteed to fail forever. A better return
code would be EIO instead of EAGAIN.
Cc: stable@vger.kernel.org
Reported-by: Steven Royer <seroyer@linux.vnet.ibm.com>
Tested-by: Steven Royer <seroyer@linux.vnet.ibm.com>
Signed-off-by: Bryant G. Ly <bgly@us.ibm.com>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
MUSB driver now has runtime PM support, but the debugfs driver misses
the PM _get/_put() calls, which could cause MUSB register access
failure.
Cc: stable@vger.kernel.org # 4.9+
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hayes Wang says:
====================
r8152: fix autosuspend issue
Avoid rx is split into two parts when runtime suspend occurs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pause the rx and make sure the rx fifo is empty when the autosuspend
occurs.
If the rx data comes when the driver is canceling the rx urb, the host
controller would stop getting the data from the device and continue
it after next rx urb is submitted. That is, one continuing data is
split into two different urb buffers. That let the driver take the
data as a rx descriptor, and unexpected behavior happens.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split rtl8152_suspend() into rtl8152_system_suspend() and
rtl8152_rumtime_suspend().
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SPC4r37 6.4.1 EXTENDED COPY(LID4) states (also applying to LID1 reqs):
A parameter list length of zero specifies that the copy manager shall
not transfer any data or alter any internal state, and this shall not
be considered an error.
This behaviour can be tested using the libiscsi ExtendedCopy.ParamHdr
test.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Check for XCOPY header, CSCD descriptor and segment descriptor list
truncation, and respond accordingly.
SPC4r37 6.4.1 EXTENDED COPY(LID4) states (also applying to LID1 reqs):
If the parameter list length causes truncation of the parameter list,
then the copy manager shall transfer no data and shall terminate the
EXTENDED COPY command with CHECK CONDITION status, with the sense key
set to ILLEGAL REQUEST, and the additional sense code set to PARAMETER
LIST LENGTH ERROR.
This behaviour can be tested using the libiscsi ExtendedCopy.ParamHdr
test.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
The XCOPY specification in SPC4r37 states that the XCOPY source and
destination device(s) should be derived from the copy source and copy
destination (CSCD) descriptor IDs in the XCOPY segment descriptor.
The CSCD IDs are generally (for block -> block copies), indexes into
the corresponding CSCD descriptor list, e.g.
=================================
EXTENDED COPY Header
=================================
CSCD Descriptor List
- entry 0
+ LU ID <--------------<------------------\
- entry 1 |
+ LU ID <______________<_____________ |
================================= | |
Segment Descriptor List | |
- segment 0 | |
+ src CSCD ID = 0 --------->---------+----/
+ dest CSCD ID = 1 ___________>______|
+ len
+ src lba
+ dest lba
=================================
Currently LIO completely ignores the src and dest CSCD IDs in the
Segment Descriptor List, and instead assumes that the first entry in the
CSCD list corresponds to the source, and the second to the destination.
This commit removes this assumption, by ensuring that the Segment
Descriptor List is parsed prior to processing the CSCD Descriptor List.
CSCD Descriptor List processing is modified to compare the current list
index with the previously obtained src and dest CSCD IDs.
Additionally, XCOPY requests where the src and dest CSCD IDs refer to
the CSCD Descriptor List entry can now be successfully processed.
Fixes: cbf031f ("target: Add support for EXTENDED_COPY copy offload")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=191381
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Ensure that the segment descriptor CSCD descriptor ID values correspond
to CSCD descriptor entries located in the XCOPY command parameter list.
SPC4r37 6.4.6.1 Table 150 specifies this range as 0000h to 07FFh, where
the CSCD descriptor location in the parameter list can be located via:
16 + (id * 32)
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[ bvanassche: inserted "; " in the format string of an error message
and also moved a "||" operator from the start of a line to the end
of the previous line ]
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
target_xcopy_locate_se_dev_e4() is used to locate an se_dev, based on
the WWN provided with the XCOPY request. Remove a couple of unneeded
arguments, and rely on the caller for the src/dst test.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Use UNSUPPORTED TARGET DESCRIPTOR TYPE CODE and UNSUPPORTED SEGMENT
DESCRIPTOR TYPE CODE additional sense codes if a descriptor type in an
XCOPY request is not supported, as specified in spc4r37 6.4.5 and 6.4.6.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
spc4r37 6.4.3.5 states:
If the combined length of the CSCD descriptors and segment descriptors
exceeds the allowed value, then the copy manager shall terminate the
command with CHECK CONDITION status, with the sense key set to ILLEGAL
REQUEST, and the additional sense code set to PARAMETER LIST LENGTH
ERROR.
This functionality can be tested using the libiscsi
ExtendedCopy.DescrLimits test.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Check the length of the XCOPY request segment descriptor list against
the value advertised via the MAXIMUM SEGMENT DESCRIPTOR COUNT field in
the RECEIVE COPY OPERATING PARAMETERS response.
spc4r37 6.4.3.5 states:
If the number of segment descriptors exceeds the allowed number, the
copy manager shall terminate the command with CHECK CONDITION status,
with the sense key set to ILLEGAL REQUEST, and the additional sense
code set to TOO MANY SEGMENT DESCRIPTORS.
This functionality is testable using the libiscsi
ExtendedCopy.DescrLimits test.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
spc4r37 6.4.3.4 states:
If the number of CSCD descriptors exceeds the allowed number, the copy
manager shall terminate the command with CHECK CONDITION status, with
the sense key set to ILLEGAL REQUEST, and the additional sense code
set to TOO MANY TARGET DESCRIPTORS.
LIO currently responds with INVALID FIELD IN PARAMETER LIST, which sees
it fail the libiscsi ExtendedCopy.DescrLimits test.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
As defined in http://www.t10.org/lists/asc-num.htm. To be used during
validation of XCOPY target and segment descriptor lists.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Make sockfs_setattr() static as it is not used outside of net/socket.c
This fixes the following GCC warning:
net/socket.c:534:5: warning: no previous prototype for ‘sockfs_setattr’ [-Wmissing-prototypes]
Fixes: 86741ec254 ("net: core: Add a UID field to struct sock.")
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only two fixes at this time. The rtlwifi fix is an important one as it
fixes a reported oops and Linus was already asking about it. The
orinoco fix is not tested on a real device, because it's old legacy
hardware and hardly no-one use it, but it should fix a (theoretical)
issue with VMAP_STACK.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYdG+sAAoJEG4XJFUm622bGo0IAJCx6Ibu+EjbfL1KDDiR4TSS
ZuWHkjVHtbSE0itUCws9RXWCBStUsDV/eFlVax7zBk4XiLtmDKHG0Kvb6K+Bm1qy
rOEgmj8Y0mYzuAHR5efgC5LyyxRqKxGeff20TUZYHQ2KcWmfe5hZi0FJpo0gFjp0
1CUZiSAFuiQmaM6mGleSRZndN65m+bSRjM8yfxTC24XqjdfTVzSXo68Cp4gYk/XE
M62gAg0fyk7UPBwBDztmCtARNW2Zr/OGolQp9ohyOxj3iAuazvTpohywA7Fa0vZu
piBwZJGMAy1ZXHgK58qvoq1ej51RNq+ttjQKiXt9YinL/YBIcs+AkvvVzDFjzZk=
=5g7Z
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-for-davem-2017-01-10' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.10
Only two fixes at this time. The rtlwifi fix is an important one as it
fixes a reported oops and Linus was already asking about it. The
orinoco fix is not tested on a real device, because it's old legacy
hardware and hardly no-one use it, but it should fix a (theoretical)
issue with VMAP_STACK.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver put a constant buffer of all zeros on the stack and
pointed a scatterlist entry at it. This doesn't work with virtual
stacks. Use ZERO_PAGE instead.
Cc: stable@vger.kernel.org # 4.9 only
Reported-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current implementation failed to detect short transfers when
attempting to read the line state, and also, to make things worse,
logged the content of the uninitialised heap transfer buffer.
Fixes: abf492e7b3 ("USB: kl5kusb105: fix DMA buffers on stack")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Plantronics BT600 does not support reading the sample rate which leads
to many lines of "cannot get freq at ep 0x1" and "cannot get freq at
ep 0x82". This patch adds the USB ID of the BT600 to quirks.c and
avoids those error messages.
Signed-off-by: Dennis Kadioglu <denk@post.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This change was missed the tmpfs modification in In CVE-2016-7097
commit 073931017b ("posix_acl: Clear SGID bit when setting
file permissions")
It can test by xfstest generic/375, which failed to clear
setgid bit in the following test case on tmpfs:
touch $testfile
chown 100:100 $testfile
chmod 2755 $testfile
_runas -u 100 -g 101 -- setfacl -m u::rwx,g::rwx,o::rwx $testfile
Signed-off-by: Gu Zheng <guzheng1@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We do not yet have users of port_window. The following errors were found
when converting the tusb6010_omap.c musb driver:
- The peripheral side must have SRC_/DST_PACKED disabled
- when configuring the burst for the peripheral side the memory side
configuration were overwritten: d->csdp = ... -> d->csdp |= ...
- The EI and FI were configured for the wrong sides of the transfers.
With these changes and the converted tus6010_omap.c I was able to verify
that things are working as they expected to work.
Fixes: 201ac4861c ("dmaengine: omap-dma: Support for slave devices with data port window")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
On a kernel with DEBUG_LOCKS, ioat_free_chan_resources triggers an
in_interrupt() warning. With PROVE_LOCKING, it reports detecting a
SOFTIRQ-safe to SOFTIRQ-unsafe lock ordering in the same code path.
This is because dma_generic_alloc_coherent() checks if the GFP flags
permit blocking. It allocates from different subsystems if blocking is
permitted. The free path knows how to return the memory to the correct
allocator. If GFP_KERNEL is specified then the alloc and free end up
going through cma_alloc(), which uses mutexes.
Given that ioat_free_chan_resources() can be called in interrupt
context, ioat_alloc_chan_resources() must specify GFP_NOWAIT so that the
allocations do not block and instead use an allocator that uses
spinlocks.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
=========================================================
[ INFO: possible irq lock inversion dependency detected ]
4.10.0-rc2-00024-g4aecec9-dirty #118 Tainted: G W
---------------------------------------------------------
swapper/1/0 just changed the state of lock:
(&(&sighand->siglock)->rlock){-.....}, at: [<ffffffffbd0a1bc6>] __lock_task_sighand+0xb6/0x2c0
but this lock took another, HARDIRQ-unsafe lock in the past:
(ucounts_lock){+.+...}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Chain exists of: &(&sighand->siglock)->rlock --> &(&tty->ctrl_lock)->rlock --> ucounts_lock
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(ucounts_lock);
local_irq_disable();
lock(&(&sighand->siglock)->rlock);
lock(&(&tty->ctrl_lock)->rlock);
<Interrupt>
lock(&(&sighand->siglock)->rlock);
*** DEADLOCK ***
This patch removes a dependency between rlock and ucount_lock.
Fixes: f333c700c6 ("pidns: Add a limit on the number of pid namespaces")
Cc: stable@vger.kernel.org
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Add MS_KERNMOUNT to the flags that are passed.
Use sget_userns and force &init_user_ns instead of calling sget so that
even if called from a weird context the internal filesystem will be
considered to be in the intial user namespace.
Luis Ressel reported that the the failure to pass MS_KERNMOUNT into
mount_pseudo broke his in development graphics driver that uses the
generic drm infrastructure. I am not certain the deriver was bug
free in it's usage of that infrastructure but since
mount_pseudo_xattr can never be triggered by userspace it is clearer
and less error prone, and less problematic for the code to be explicit.
Reported-by: Luis Ressel <aranea@aixah.de>
Tested-by: Luis Ressel <aranea@aixah.de>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Protecting the mountpoint hashtable with namespace_sem was sufficient
until a call to umount_mnt was added to mntput_no_expire. At which
point it became possible for multiple calls of put_mountpoint on
the same hash chain to happen on the same time.
Kristen Johansen <kjlx@templeofstupid.com> reported:
> This can cause a panic when simultaneous callers of put_mountpoint
> attempt to free the same mountpoint. This occurs because some callers
> hold the mount_hash_lock, while others hold the namespace lock. Some
> even hold both.
>
> In this submitter's case, the panic manifested itself as a GP fault in
> put_mountpoint() when it called hlist_del() and attempted to dereference
> a m_hash.pprev that had been poisioned by another thread.
Al Viro observed that the simple fix is to switch from using the namespace_sem
to the mount_lock to protect the mountpoint hash table.
I have taken Al's suggested patch moved put_mountpoint in pivot_root
(instead of taking mount_lock an additional time), and have replaced
new_mountpoint with get_mountpoint a function that does the hash table
lookup and addition under the mount_lock. The introduction of get_mounptoint
ensures that only the mount_lock is needed to manipulate the mountpoint
hashtable.
d_set_mounted is modified to only set DCACHE_MOUNTED if it is not
already set. This allows get_mountpoint to use the setting of
DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry
happens exactly once.
Cc: stable@vger.kernel.org
Fixes: ce07d891a0 ("mnt: Honor MNT_LOCKED when detaching mounts")
Reported-by: Krister Johansen <kjlx@templeofstupid.com>
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In generic_load_microcode(), curr_mc_size is the size of the last
allocated buffer and since we have this performance "optimization"
there to vmalloc a new buffer only when the current one is bigger,
curr_mc_size ends up becoming the size of the biggest buffer we've seen
so far.
However, we end up saving the microcode patch which matches our CPU
and its size is not curr_mc_size but the respective mc_size during the
iteration while we're staring at it.
So save that mc_size into a separate variable and use it to store the
previously found microcode buffer.
Without this fix, we could get oops like this:
BUG: unable to handle kernel paging request at ffffc9000e30f000
IP: __memcpy+0x12/0x20
...
Call Trace:
? kmemdup+0x43/0x60
__alloc_microcode_buf+0x44/0x70
save_microcode_patch+0xd4/0x150
generic_load_microcode+0x1b8/0x260
request_microcode_user+0x15/0x20
microcode_write+0x91/0x100
__vfs_write+0x34/0x120
vfs_write+0xc1/0x130
SyS_write+0x56/0xc0
do_syscall_64+0x6c/0x160
entry_SYSCALL64_slow_path+0x25/0x25
Fixes: 06b8534cb7 ("x86/microcode: Rework microcode loading")
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/4f33cbfd-44f2-9bed-3b66-7446cd14256f@ce.jp.nec.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We allocate struct ucode_patch here. @size is the size of microcode data
and used for kmemdup() later in this function.
Fixes: 06b8534cb7 ("x86/microcode: Rework microcode loading")
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/7a730dc9-ac17-35c4-fe76-dfc94e5ecd95@ce.jp.nec.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Since on Intel we're required to do CPUID(1) first, before reading
the microcode revision MSR, let's add a special helper which does the
required steps so that we don't forget to do them next time, when we
want to read the microcode revision.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20170109114147.5082-4-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Intel supplies the microcode revision value in MSR 0x8b
(IA32_BIOS_SIGN_ID) after CPUID(1) has been executed. Execute it each
time before reading that MSR.
It used to do sync_core() which did do CPUID but
c198b121b1 ("x86/asm: Rewrite sync_core() to use IRET-to-self")
changed the sync_core() implementation so we better make the microcode
loading case explicit, as the SDM documents it.
Reported-and-tested-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20170109114147.5082-3-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This fixes a build error on certain architectures, such as ppc64.
Fixes: 6995f0b247e("md: takeover should clear unrelated bits")
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
There are only two reasons for xfs_log_force / xfs_log_force_lsn to fail:
one is an I/O error, for which xlog_bdstrat already logs a warning, and
the second is an already shutdown log due to a previous I/O errors. In
the latter case we'll already have a previous indication for the actual
error, but the large stream of misleading warnings from xfs_log_force
will probably scroll it out of the message buffer.
Simply removing the warnings thus makes the XFS log reporting significantly
better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
