Use pm_runtime_resume_and_get() to replace the pm_runtime_get_sync() and
pm_runtime_put_sync() pattern.
No functional changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220426183807.102442-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This function returns zero unconditionally, so there isn't any benefit
of returning a value. Make it return void to be able to see at a glance
that the return value of pcm1789_i2c_remove() is always zero.
This patch is a preparation for making i2c remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220425193023.61046-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Update machine driver startup, shutdown callback functions to avoid
sound card registration failure on other platforms.
Without this change, platforms with WCD codec is failing to register
sound card.
Fixes: c5198db82d ("ASoC: qcom: Add driver support for ALC5682I-VS")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Link: https://lore.kernel.org/r/1650374329-7279-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series of patches adds support for Analog Devices MAX98396
mono amplifier with IV sense. The device provides a PCM interface
for audio data and a standard I2C interface for control data
communication. This driver also supports MAX98397 which is
a variant of MAX98396 with wide input supply range.
Signed-off-by: Ryan Lee <ryan.lee.analog@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220423021558.1773598-1-ryan.lee.analog@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only effect of returning an error code in an i2c remove callback
(compared to returning zero) is that the i2c core emits a generic
warning. The device is still removed.
So even if disabling the regulators fails it's sensible to return zero
to suppress the additional generic and little helpful error message.
This patch is a preparation for making i2c remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220425193206.61710-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The SOF CI and daily tests exposed a number of issues with corner
cases on platforms using the HDaudio DAI, such as UpExtreme boards or
usual HDaudio+DMIC laptops.
This patchset provides improvements for pause_push/pause_release,
suspend-resume, mixing use cases and combinations of all three.
The initial patches provide a cleanup, the last patches improve the
state machine and DMA handling.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The firmware ready (fw_ready) message is sent by the firmware to notify the host
that it has been booted up and caries additional information about it's
configuration.
All of this is IPC specific, the message itself is IPC version specific and the
information itself also.
Move the code to handle the fw_ready message under ipc3.c since the parsing and
interpretation is IPC specific.
A followup series is going to take care of the rest of the loader.c to make it
IPC agnostic.
Merge series from Stephen Kitt <steve@sk2.org>:
This series covers all the remaining changes to migrate
sound/soc/codecs i2c probes to probe_new, where the const struct
i2c_client * argument is still used. Instead of relying on the
parameter passed in, i2c_match_id is used instead.
With this set of patches, all the sound/soc/codecs i2c probes use the
new probe definition.
Changes since v1: two missing files were added.
Stephen Kitt (7):
ASoC: ak*: use i2c_match_id and simple i2c probe
ASoC: alc56*: use i2c_match_id and simple i2c probe
ASoC: max980*: use i2c_match_id and simple i2c probe
ASoC: pcm186x: use i2c_match_id and simple i2c probe
ASoC: tas*: use i2c_match_id and simple i2c probe
ASoC: tlv320*: use i2c_match_id and simple i2c probe
ASoC: tpa6130: use i2c_match_id and simple i2c probe
sound/soc/codecs/ak4613.c | 10 +++++----
sound/soc/codecs/ak4642.c | 8 ++++---
sound/soc/codecs/alc5623.c | 24 +++++++++++----------
sound/soc/codecs/alc5632.c | 20 +++++++++--------
sound/soc/codecs/max98088.c | 21 +++++++++---------
sound/soc/codecs/max98090.c | 23 ++++++++++----------
sound/soc/codecs/max98095.c | 19 +++++++++--------
sound/soc/codecs/pcm186x-i2c.c | 24 ++++++++++-----------
sound/soc/codecs/tas2562.c | 25 +++++++++++-----------
sound/soc/codecs/tas571x.c | 11 ++++++----
sound/soc/codecs/tas5720.c | 21 +++++++++---------
sound/soc/codecs/tlv320adc3xxx.c | 21 +++++++++---------
sound/soc/codecs/tlv320aic31xx.c | 32 ++++++++++++++--------------
sound/soc/codecs/tlv320aic32x4-i2c.c | 11 ++++++----
sound/soc/codecs/tlv320aic3x-i2c.c | 25 +++++++++++-----------
sound/soc/codecs/tpa6130a2.c | 19 +++++++++--------
16 files changed, 168 insertions(+), 146 deletions(-)
base-commit: 5d763a740e5b24e4a2ca04317255e7e941876338
--
2.27.0
Add support of SOF on Mediatek mt8186 SoC.
MT8186 has 2 Cortex A76 cores paired with 6 Cortex A55 cores.
It also has Cadence HiFi-5 DSP single core. The IPC communication
between AP and DSP is based on shared DRAM and mailbox interrupt.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220422055659.8738-2-tinghan.shen@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220414085310.2541546-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220420030246.2575629-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Both MCLK and BCLK can be the clock source of sysclk via PLL
according to its datasheet.
This patch sets MCLK as the clock source as we use MCLK in the
previous projects.
Fixes: c5198db82d ("ASoC: qcom: Add driver support for ALC5682I-VS")
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Link: https://lore.kernel.org/r/20220419062952.356017-1-judyhsiao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to enable NHLT support one must select SND_INTEL_DSP_CONFIG,
which will select SND_INTEL_NHLT. Otherwise the file containing NHLT
code doesn't get build leading to errors when linking.
Fixes: 274d79e518 ("ASoC: Intel: avs: Configure modules according to their type")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220425091646.545216-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Only supported platform for AVS are x86 machines, so there is no reason
for it to be enabled on other architectures. Allow exception for compile
tests.
Fixes: 274d79e518 ("ASoC: Intel: avs: Configure modules according to their type")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220425091646.545216-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220420030439.2575817-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220419110718.2574674-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The SSI block is identical on Renesas RZ/G2L, RZ/G2UL and RZ/V2L SoC's, so
instead of adding dependency for each SoC's add dependency on ARCH_RZG2L.
The ARCH_RZG2L config option is already selected by ARCH_R9A07G043,
ARCH_R9A07G044 and ARCH_R9A07G054.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220423164443.146299-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220420030402.2575755-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
In the context of an i2c probe, i2c_match_id with the module id table
and the probed client never returns null, so removing the null check
on the i2c_device_id pointer is safe.
The i2c id tables are moved up before the probe function, as
suggested by Wolfram Sang, except where the existing code already had
a declaration for the of_device_id table.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-7-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
The i2c id tables are moved up before the probe function, as
suggested by Wolfram Sang, except where the existing code already had
a declaration for the of_device_id table.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-6-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
The i2c id table is moved up before the probe function, as suggested
by Wolfram Sang.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-5-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
In the context of an i2c probe, i2c_match_id with the module id table
and the probed client never returns null, so removing the null check
on the i2c_device_id pointer is safe.
The i2c id tables are moved up before the probe function, as
suggested by Wolfram Sang.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-4-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
The i2c id tables are moved up before the probe function, as
suggested by Wolfram Sang.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-3-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-2-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw_ready is handled internally to ipc3, we can remove the old code
from the loader.c along with the functions only used by the fw_ready()
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw_ready is handled internally to ipc3 and the callback no longer in
use.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw_ready is handled internally to ipc3 and the callback no longer in
use.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw_ready is handled internally to ipc3 and the callback no longer in
use.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw_ready is handled internally to ipc3, the callback no longer in
use and it is going to be removed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The handling of fw_ready is IPC3 specific, move the needed code from the
loader.c to ipc3.c and stop using the sof_ops(sdev)->fw_ready() callback.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Once we've set-up the HDA stream and its format, we currently don't
support additional format changes. We already have a protection in the
.prepare case, but this needs to be added in the hw_params too.
In mixing use cases where two DPCM FEs are connected to the same BE,
if can happen that there are multiple calls to the BE hw_params when
the two FEs are configured simultaneously.
This could alternatively be fixed at the DPCM level but that's a more
intrusive change requiring infrastructure changes: this would need to
be paired with the definition of fixed hw_params at the mixer level.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We do the same operations from different places, add a helper to
enforce consistency and make the programming sequences clearer.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sequences are missing a call to snd_soc_dai_set_dma_data() when
the stream is cleared, as well as a release of the stream, and tests
to avoid pointer dereferences.
This fixes an underflow issue in a corner case with two streams paused
before a suspend-resume cycle. After resume, the pause_release of the
last stream causes an underflow due to an invalid sequence.
This problem probably existed since the beginning and is only see with
prototypes of a 'deep-buffer' capability, which depends on additional
ASoC fixes, so there's is no Fixes: tag and no real requirement to
backport this patch.
BugLink: https://github.com/thesofproject/linux/issues/3151
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add comments and re-align with the TRIGGER_SUSPEND case with an
additional call to hda_dai_hw_free_ipc() to free-up resources.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The location of the code was not optimal and prevents us from using
helpers, let's move it to hda-dai.c.
No functionality change in this patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We do the same thing from different places, let's use a helper.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Before suspending, walk through all the widgets to make sure all
refcounts are zero. If not, the resume will not work and random errors
will be reported. Adding this paranoia check will help identify leaks
and broken sequences.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Just code move with no functionality change, to clearly separate out
the 'dai' operation from the link DMA ones.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The link DMA state management is handled completely on the host side,
while the DAI operations require an IPC. Split the first part in
dedicated helpers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use helper instead of open-coding the same thing multiple times.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
the argument "struct sof_intel_hda_stream *hda_stream" is not used, remove.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Intel documentation refers to the concepts of 'HDAudio host
DMA' (system memory <--> DSP) and 'HDaudio link DMA' (DSP <-->
peripherals). We currently use the prefix 'hda_link' to describe DAI
operations, which can be confused for dailink operations.
Since the topology tokens refer unambiguously to the 'HDA' dai, let's
drop the link prefix for dai-related ops/callbacks. Conversely let's
use 'hda_link_dma' for routines related to the DMA management. In a
follow-up patch we will introduce the 'hda_dai_link' prefix for dailink
ops/callbacks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The BE DAI driver ops involve operations that are IPC-specific. For ex:
for the HDA DAI, the trigger op involves sending the DAI_CONFIG IPC to
the DSP to stop the DMA for the stop/pause commands. This sequence is
different for IPC3 and IPC4. So, make the dai driver ops IPC-specific
and set the IPC3-specific ops during the ops_init() callback.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system is suspended while a PCM is paused, it doesn't receive
the SUSPEND trigger. So, the SOF driver has to ensure that the PCM and
the widgets associated with the paused PCM are freed in the firmware
during suspend. This is handled in the
sof_tear_down_left_over_pipelines() call. But since the state of this
PCM is SUSPENDED, we end up clearing the prepared flag for the PCM
before freeing it. This results in IPC errors while freeing the widgets.
But because the widget use_counts are reset to 0 even though the IPC
fails, releasing the paused stream after resuming from suspend proceeds
normally.
Fix the IPC errors by removing the clearing of the prepared flag in
sof_set_hw_params_upon_resume(). In fact, we can remove the
sof_set_hw_params_upon_resume() and call
snd_sof_dsp_hw_params_upon_resume() directly. This will ensure that the
PCM is freed in the firmware before the IPC's for freeing the widgets
are sent.
BugLink: https://github.com/thesofproject/linux/issues/3543
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Add two PCI IDs and quirks for APL Chromebooks and Intel IPC4
selection for developers.
