When trying to move keys from one node/leaf to another sibling node/leaf,
if the sibling keys check fails we just print an error message with the
last key of the left sibling and the first key of the right sibling.
However it's also useful to print all the keys of each sibling, as it
may provide some clues to what went wrong, which code path may be
inserting keys in an incorrect order. So just do that, print the siblings
with btrfs_print_tree(), as it works for both leaves and nodes.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the sibling keys check fails before we move keys from one sibling
leaf to another, we are not aborting the transaction - we leave that to
some higher level caller of btrfs_search_slot() (or anything else that
uses it to insert items into a b+tree).
This means that the transaction abort will provide a stack trace that
omits the b+tree modification call chain. So change this to immediately
abort the transaction and therefore get a more useful stack trace that
shows us the call chain in the bt+tree modification code.
It's also important to immediately abort the transaction just in case
some higher level caller is not doing it, as this indicates a very
serious corruption and we should stop the possibility of doing further
damage.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a device replace finishes, the source device is freed by calling
btrfs_free_device() at btrfs_rm_dev_replace_free_srcdev(), but the
allocation state, tracked in the device's alloc_state io tree, is never
freed.
This is a regression recently introduced by commit f0bb5474cf ("btrfs:
remove redundant release of btrfs_device::alloc_state"), which removed a
call to extent_io_tree_release() from btrfs_free_device(), with the
rationale that btrfs_close_one_device() already releases the allocation
state from a device and btrfs_close_one_device() is always called before
a device is freed with btrfs_free_device(). However that is not true for
the device replace case, as btrfs_free_device() is called without any
previous call to btrfs_close_one_device().
The issue is trivial to reproduce, for example, by running test btrfs/027
from fstests:
$ ./check btrfs/027
$ rmmod btrfs
$ dmesg
(...)
[84519.395485] BTRFS info (device sdc): dev_replace from <missing disk> (devid 2) to /dev/sdg started
[84519.466224] BTRFS info (device sdc): dev_replace from <missing disk> (devid 2) to /dev/sdg finished
[84519.552251] BTRFS info (device sdc): scrub: started on devid 1
[84519.552277] BTRFS info (device sdc): scrub: started on devid 2
[84519.552332] BTRFS info (device sdc): scrub: started on devid 3
[84519.552705] BTRFS info (device sdc): scrub: started on devid 4
[84519.604261] BTRFS info (device sdc): scrub: finished on devid 4 with status: 0
[84519.609374] BTRFS info (device sdc): scrub: finished on devid 3 with status: 0
[84519.610818] BTRFS info (device sdc): scrub: finished on devid 1 with status: 0
[84519.610927] BTRFS info (device sdc): scrub: finished on devid 2 with status: 0
[84559.503795] BTRFS: state leak: start 1048576 end 1351614463 state 1 in tree 1 refs 1
[84559.506764] BTRFS: state leak: start 1048576 end 1347420159 state 1 in tree 1 refs 1
[84559.510294] BTRFS: state leak: start 1048576 end 1351614463 state 1 in tree 1 refs 1
So fix this by adding back the call to extent_io_tree_release() at
btrfs_free_device().
Fixes: f0bb5474cf ("btrfs: remove redundant release of btrfs_device::alloc_state")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A call to btrfs_prev_leaf() may end up returning a path that points to the
same item (key) again. This happens if while btrfs_prev_leaf(), after we
release the path, a concurrent insertion happens, which moves items off
from a sibling into the front of the previous leaf, and an item with the
computed previous key does not exists.
For example, suppose we have the two following leaves:
Leaf A
-------------------------------------------------------------
| ... key (300 96 10) key (300 96 15) key (300 96 16) |
-------------------------------------------------------------
slot 20 slot 21 slot 22
Leaf B
-------------------------------------------------------------
| key (300 96 20) key (300 96 21) key (300 96 22) ... |
-------------------------------------------------------------
slot 0 slot 1 slot 2
If we call btrfs_prev_leaf(), from btrfs_previous_item() for example, with
a path pointing to leaf B and slot 0 and the following happens:
1) At btrfs_prev_leaf() we compute the previous key to search as:
(300 96 19), which is a key that does not exists in the tree;
2) Then we call btrfs_release_path() at btrfs_prev_leaf();
3) Some other task inserts a key at leaf A, that sorts before the key at
slot 20, for example it has an objectid of 299. In order to make room
for the new key, the key at slot 22 is moved to the front of leaf B.
This happens at push_leaf_right(), called from split_leaf().
After this leaf B now looks like:
--------------------------------------------------------------------------------
| key (300 96 16) key (300 96 20) key (300 96 21) key (300 96 22) ... |
--------------------------------------------------------------------------------
slot 0 slot 1 slot 2 slot 3
4) At btrfs_prev_leaf() we call btrfs_search_slot() for the computed
previous key: (300 96 19). Since the key does not exists,
btrfs_search_slot() returns 1 and with a path pointing to leaf B
and slot 1, the item with key (300 96 20);
5) This makes btrfs_prev_leaf() return a path that points to slot 1 of
leaf B, the same key as before it was called, since the key at slot 0
of leaf B (300 96 16) is less than the computed previous key, which is
(300 96 19);
6) As a consequence btrfs_previous_item() returns a path that points again
to the item with key (300 96 20).
For some users of btrfs_prev_leaf() or btrfs_previous_item() this may not
be functional a problem, despite not making sense to return a new path
pointing again to the same item/key. However for a caller such as
tree-log.c:log_dir_items(), this has a bad consequence, as it can result
in not logging some dir index deletions in case the directory is being
logged without holding the inode's VFS lock (logging triggered while
logging a child inode for example) - for the example scenario above, in
case the dir index keys 17, 18 and 19 were deleted in the current
transaction.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=Jt7p
-----END PGP SIGNATURE-----
Merge tag 'for-6.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Mostly core changes and cleanups, some notable fixes and two
performance improvements in directory logging.
The IO path cleanups are removing or refactoring old code, scrub main
loop has been completely rewritten also refactoring old code.
There are some changes to non-btrfs code, mostly trivial, the cgroup
punt bio logic is only moved from generic code.
Performance improvements:
- improve logging changes in a directory during one transaction,
avoid iterating over items and reduce lock contention (fsync time
4x lower)
- when logging directory entries during one transaction, reduce
locking of subvolume trees by checking tree-log instead
(improvement in throughput and latency for concurrent access to a
subvolume)
Notable fixes:
- dev-replace:
- properly honor read mode when requested to avoid reading from
source device
- target device won't be used for eventual read repair, this is
unreliable for NODATASUM files
- when there are unpaired (and unrepairable) metadata during
replace, exit early with error and don't try to finish whole
operation
- scrub ioctl properly rejects unknown flags
- fix global block reserve calculations
- fix partial direct io write when there's a page fault in the
middle, iomap will try to continue with partial request but the
btrfs part did not match that, this can lead to zeros written
instead of data
Core changes:
- io path:
- continued cleanups and refactoring around bio handling
- extent io submit path simplifications and cleanups
- flush write path simplifications and cleanups
- rework logic of passing sync mode of bio, with further cleanups
- rewrite scrub code flow, restructure how the stripes are enumerated
and verified in a more unified way
- allow to set lower threshold for block group reclaim in debug mode
to aid zoned mode testing
- remove obsolete time-based delayed ref throttling logic when
truncating items
- DREW locks are not using percpu variables anymore
- more warning fixes (-Wmaybe-uninitialized)
- u64 division simplifications
- error handling improvements
Non-btrfs code changes:
- push cgroup punt bio logic to btrfs code (there was no other user
of that), the functionality can be now selected separately by
BLK_CGROUP_PUNT_BIO
- crc32c_impl removed after removing last uses in btrfs code
- add btrfs_assertfail() to objtool table"
* tag 'for-6.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (147 commits)
btrfs: mark btrfs_assertfail() __noreturn
btrfs: fix uninitialized variable warnings
btrfs: use log root when iterating over index keys when logging directory
btrfs: avoid iterating over all indexes when logging directory
btrfs: dev-replace: error out if we have unrepaired metadata error during
btrfs: remove pointless loop at btrfs_get_next_valid_item()
btrfs: scrub: reject unsupported scrub flags
btrfs: reinterpret async discard iops_limit=0 as no delay
btrfs: set default discard iops_limit to 1000
btrfs: remove unused raid56 functions which were dedicated for scrub
btrfs: scrub: remove scrub_bio structure
btrfs: scrub: remove scrub_block and scrub_sector structures
btrfs: scrub: remove the old scrub recheck code
btrfs: scrub: remove the old writeback infrastructure
btrfs: scrub: remove scrub_parity structure
btrfs: scrub: use scrub_stripe to implement RAID56 P/Q scrub
btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure
btrfs: scrub: introduce helper to queue a stripe for scrub
btrfs: scrub: introduce error reporting functionality for scrub_stripe
btrfs: scrub: introduce a writeback helper for scrub_stripe
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZEEhwgAKCRCRxhvAZXjc
otwgAQDXHnKiPm/d76lITXbxdUNCtvZz+ig26EbOrD+vEszzIQEA81dru0QbCNCt
ctoZdcsmtKbt2VaYQF1CDOhlnNg5VQM=
=pER1
-----END PGP SIGNATURE-----
Merge tag 'v6.4/vfs.acl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull acl updates from Christian Brauner:
"After finishing the introduction of the new posix acl api last cycle
the generic POSIX ACL xattr handlers are still around in the
filesystems xattr handlers for two reasons:
(1) Because a few filesystems rely on the ->list() method of the
generic POSIX ACL xattr handlers in their ->listxattr() inode
operation.
(2) POSIX ACLs are only available if IOP_XATTR is raised. The
IOP_XATTR flag is raised in inode_init_always() based on whether
the sb->s_xattr pointer is non-NULL. IOW, the registered xattr
handlers of the filesystem are used to raise IOP_XATTR. Removing
the generic POSIX ACL xattr handlers from all filesystems would
risk regressing filesystems that only implement POSIX ACL support
and no other xattrs (nfs3 comes to mind).
This contains the work to decouple POSIX ACLs from the IOP_XATTR flag
as they don't depend on xattr handlers anymore. So it's now possible
to remove the generic POSIX ACL xattr handlers from the sb->s_xattr
list of all filesystems. This is a crucial step as the generic POSIX
ACL xattr handlers aren't used for POSIX ACLs anymore and POSIX ACLs
don't depend on the xattr infrastructure anymore.
Adressing problem (1) will require more long-term work. It would be
best to get rid of the ->list() method of xattr handlers completely at
some point.
For erofs, ext{2,4}, f2fs, jffs2, ocfs2, and reiserfs the nop POSIX
ACL xattr handler is kept around so they can continue to use
array-based xattr handler indexing.
This update does simplify the ->listxattr() implementation of all
these filesystems however"
* tag 'v6.4/vfs.acl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
acl: don't depend on IOP_XATTR
ovl: check for ->listxattr() support
reiserfs: rework priv inode handling
fs: rename generic posix acl handlers
reiserfs: rework ->listxattr() implementation
fs: simplify ->listxattr() implementation
fs: drop unused posix acl handlers
xattr: remove unused argument
xattr: add listxattr helper
xattr: simplify listxattr helpers
-----BEGIN PGP SIGNATURE-----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=EaE9
-----END PGP SIGNATURE-----
Merge tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux
Pull ITER_UBUF updates from Jens Axboe:
"This turns singe vector imports into ITER_UBUF, rather than
ITER_IOVEC.
The former is more trivial to iterate and advance, and hence a bit
more efficient. From some very unscientific testing, ~60% of all iovec
imports are single vector"
* tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux:
iov_iter: Mark copy_compat_iovec_from_user() noinline
iov_iter: import single vector iovecs as ITER_UBUF
iov_iter: convert import_single_range() to ITER_UBUF
iov_iter: overlay struct iovec and ubuf/len
iov_iter: set nr_segs = 1 for ITER_UBUF
iov_iter: remove iov_iter_iovec()
iov_iter: add iter_iov_addr() and iter_iov_len() helpers
ALSA: pcm: check for user backed iterator, not specific iterator type
IB/qib: check for user backed iterator, not specific iterator type
IB/hfi1: check for user backed iterator, not specific iterator type
iov_iter: add iter_iovec() helper
block: ensure bio_alloc_map_data() deals with ITER_UBUF correctly
-----BEGIN PGP SIGNATURE-----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=mGL5
-----END PGP SIGNATURE-----
Merge tag 'for-6.3-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two patches fixing the problem with aync discard.
The default settings had a low IOPS limit and processing a large batch
to discard would take a long time. On laptops this can cause increased
power consumption due to disk activity.
As async discard has been on by default since 6.2 this likely affects
a lot of users.
Summary:
- increase the default IOPS limit 10x which reportedly helped
- setting the sysfs IOPS value to 0 now does not throttle anymore
allowing the discards to be processed at full speed. Previously
there was an arbitrary 6 hour target for processing the pending
batch"
* tag 'for-6.3-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: reinterpret async discard iops_limit=0 as no delay
btrfs: set default discard iops_limit to 1000
Currently, a limit of 0 results in a hard coded metering over 6 hours.
Since the default is a set limit, I suspect no one truly depends on this
rather arbitrary setting. Repurpose it for an arguably more useful
"unlimited" mode, where the delay is 0.
Note that if block groups are too new, or go fully empty, there is still
a delay associated with those conditions. Those delays implement
heuristics for not trimming a region we are relatively likely to fully
overwrite soon.
CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously, the default was a relatively conservative 10. This results
in a 100ms delay, so with ~300 discards in a commit, it takes the full
30s till the next commit to finish the discards. On a workstation, this
results in the disk never going idle, wasting power/battery, etc.
Set the default to 1000, which results in using the smallest possible
delay, currently, which is 1ms. This has shown to not pathologically
keep the disk busy by the original reporter.
Link: https://lore.kernel.org/linux-btrfs/Y%2F+n1wS%2F4XAH7X1p@nz/
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2182228
CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Neal Gompa <neal@gompa.dev
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are some warnings on older compilers (gcc 10, 7) or non-x86_64
architectures (aarch64). As btrfs wants to enable -Wmaybe-uninitialized
by default, fix the warnings even though it's not necessary on recent
compilers (gcc 12+).
../fs/btrfs/volumes.c: In function ‘btrfs_init_new_device’:
../fs/btrfs/volumes.c:2703:3: error: ‘seed_devices’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2703 | btrfs_setup_sprout(fs_info, seed_devices);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../fs/btrfs/send.c: In function ‘get_cur_inode_state’:
../include/linux/compiler.h:70:32: error: ‘right_gen’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
70 | (__if_trace.miss_hit[1]++,1) : \
| ^
../fs/btrfs/send.c:1878:6: note: ‘right_gen’ was declared here
1878 | u64 right_gen;
| ^~~~~~~~~
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
When logging dir dentries of a directory, we iterate over the subvolume
tree to find dir index keys on leaves modified in the current transaction.
This however is heavy on locking, since btrfs_search_forward() may often
keep locks on extent buffers for quite a while when walking the tree to
find a suitable leaf modified in the current transaction and with a key
not smaller than then the provided minimum key. That means it will block
other tasks trying to access the subvolume tree, which may be common fs
operations like creating, renaming, linking, unlinking, reflinking files,
etc.
A better solution is to iterate the log tree, since it's much smaller than
a subvolume tree and just use plain btrfs_search_slot() (or the wrapper
btrfs_for_each_slot()) and only contains dir index keys added in the
current transaction.
The following bonnie++ test on a non-debug kernel (with Debian's default
kernel config) on a 20G null block device, was used to measure the impact:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
NR_DIRECTORIES=20
NR_FILES=20480 # must be a multiple of 1024
DATASET_SIZE=$(( (8 * 1024 * 1024 * 1024) / 1048576 )) # 8 GiB as megabytes
DIRECTORY_SIZE=$(( DATASET_SIZE / NR_FILES ))
NR_FILES=$(( NR_FILES / 1024 ))
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
mount $DEV $MNT
bonnie++ -u root -d $MNT \
-n $NR_FILES:$DIRECTORY_SIZE:$DIRECTORY_SIZE:$NR_DIRECTORIES \
-r 0 -s $DATASET_SIZE -b
umount $MNT
Before patchset:
Version 2.00a ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Name:Size etc /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
debian0 8G 376k 99 1.1g 98 939m 92 1527k 99 3.2g 99 9060 256
Latency 24920us 207us 680ms 5594us 171us 2891us
Version 2.00a ------Sequential Create------ --------Random Create--------
debian0 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
20/20 20480 96 +++++ +++ 20480 95 20480 99 +++++ +++ 20480 97
Latency 8708us 137us 5128us 6743us 60us 19712us
After patchset:
Version 2.00a ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Name:Size etc /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
debian0 8G 384k 99 1.2g 99 971m 91 1533k 99 3.3g 99 9180 309
Latency 24930us 125us 661ms 5587us 46us 2020us
Version 2.00a ------Sequential Create------ --------Random Create--------
debian0 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
20/20 20480 90 +++++ +++ 20480 99 20480 99 +++++ +++ 20480 97
Latency 7030us 61us 1246us 4942us 56us 16855us
The patchset consists of this patch plus a previous one that has the
following subject:
"btrfs: avoid iterating over all indexes when logging directory"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a directory, after copying all directory index items from the
subvolume tree to the log tree, we iterate over the subvolume tree to find
all dir index items that are located in leaves COWed (or created) in the
current transaction. If we keep logging a directory several times during
the same transaction, we end up iterating over the same dir index items
everytime we log the directory, wasting time and adding extra lock
contention on the subvolume tree.
So just keep track of the last logged dir index offset in order to start
the search for that index (+1) the next time the directory is logged, as
dir index values (key offsets) come from a monotonically increasing
counter.
The following test measures the difference before and after this change:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
mount -o ssd $DEV $MNT
# Time values in milliseconds.
declare -a fsync_times
# Total number of files added to the test directory.
num_files=1000000
# Fsync directory after every N files are added.
fsync_period=100
mkdir $MNT/testdir
fsync_total_time=0
for ((i = 1; i <= $num_files; i++)); do
echo -n > $MNT/testdir/file_$i
if [ $((i % fsync_period)) -eq 0 ]; then
start=$(date +%s%N)
xfs_io -c "fsync" $MNT/testdir
end=$(date +%s%N)
fsync_total_time=$((fsync_total_time + (end - start)))
fsync_times[i]=$(( (end - start) / 1000000 ))
echo -n -e "Progress $i / $num_files\r"
fi
done
echo -e "\nHistogram of directory fsync duration in ms:\n"
printf '%s\n' "${fsync_times[@]}" | \
perl -MStatistics::Histogram -e '@d = <>; print get_histogram(\@d);'
fsync_total_time=$((fsync_total_time / 1000000))
echo -e "\nTotal time spent in fsync: $fsync_total_time ms\n"
echo
umount $MNT
The test was run on a non-debug kernel (Debian's default kernel config)
against a 15G null block device.
Result before this change:
Histogram of directory fsync duration in ms:
Count: 10000
Range: 3.000 - 362.000; Mean: 34.556; Median: 31.000; Stddev: 25.751
Percentiles: 90th: 71.000; 95th: 77.000; 99th: 81.000
3.000 - 5.278: 1423 #################################
5.278 - 8.854: 1173 ###########################
8.854 - 14.467: 591 ##############
14.467 - 23.277: 1025 #######################
23.277 - 37.105: 1422 #################################
37.105 - 58.809: 2036 ###############################################
58.809 - 92.876: 2316 #####################################################
92.876 - 146.346: 6 |
146.346 - 230.271: 6 |
230.271 - 362.000: 2 |
Total time spent in fsync: 350527 ms
Result after this change:
Histogram of directory fsync duration in ms:
Count: 10000
Range: 3.000 - 1088.000; Mean: 8.704; Median: 8.000; Stddev: 12.576
Percentiles: 90th: 12.000; 95th: 14.000; 99th: 17.000
3.000 - 6.007: 3222 #################################
6.007 - 11.276: 5197 #####################################################
11.276 - 20.506: 1551 ################
20.506 - 36.674: 24 |
36.674 - 201.552: 1 |
201.552 - 353.841: 4 |
353.841 - 1088.000: 1 |
Total time spent in fsync: 92114 ms
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Even before the scrub rework, if we have some corrupted metadata failed
to be repaired during replace, we still continue replacing and let it
finish just as there is nothing wrong:
BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started
BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1
BTRFS warning (device dm-4): tree block 5578752 mirror 0 has bad csum, has 0x00000000 want 0xade80ca1
BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5
BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5
BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad bytenr, has 0 want 5578752
BTRFS error (device dm-4): unable to fixup (regular) error at logical 5578752 on dev /dev/mapper/test-scratch1
BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 finished
This can lead to unexpected problems for the resulting filesystem.
[CAUSE]
Btrfs reuses scrub code path for dev-replace to iterate all dev extents.
But unlike scrub, dev-replace doesn't really bother to check the scrub
progress, which records all the errors found during replace.
And even if we check the progress, we cannot really determine which
errors are minor, which are critical just by the plain numbers.
(remember we don't treat metadata/data checksum error differently).
This behavior is there from the very beginning.
[FIX]
Instead of continuing the replace, just error out if we hit an
unrepaired metadata sector.
Now the dev-replace would be rejected with -EIO, to let the user know.
Although it also means, the filesystem has some metadata error which
cannot be repaired, the user would be upset anyway.
The new dmesg would look like this:
BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started
BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1
BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1
BTRFS error (device dm-4): unable to fixup (regular) error at logical 5570560 on dev /dev/mapper/test-scratch1 physical 5570560
BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5
BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5
BTRFS error (device dm-4): stripe 5570560 has unrepaired metadata sector at 5578752
BTRFS error (device dm-4): btrfs_scrub_dev(/dev/mapper/test-scratch1, 1, /dev/mapper/test-scratch2) failed -5
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's pointless to have a while loop at btrfs_get_next_valid_item(), as if
the slot on the current leaf is beyond the last item, we call
btrfs_next_leaf(), which leaves us at a valid slot of the next leaf (or
a valid slot in the current leaf if after releasing the path an item gets
pushed from the next leaf to the current leaf).
So just call btrfs_next_leaf() if the current slot on the current leaf is
beyond the last item.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the introduction of scrub interface, the only flag that we support
is BTRFS_SCRUB_READONLY. Thus there is no sanity checks, if there are
some undefined flags passed in, we just ignore them.
This is problematic if we want to introduce new scrub flags, as we have
no way to determine if such flags are supported.
Address the problem by introducing a check for the flags, and if
unsupported flags are set, return -EOPNOTSUPP to inform the user space.
This check should be backported for all supported kernels before any new
scrub flags are introduced.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, a limit of 0 results in a hard coded metering over 6 hours.
Since the default is a set limit, I suspect no one truly depends on this
rather arbitrary setting. Repurpose it for an arguably more useful
"unlimited" mode, where the delay is 0.
Note that if block groups are too new, or go fully empty, there is still
a delay associated with those conditions. Those delays implement
heuristics for not trimming a region we are relatively likely to fully
overwrite soon.
CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously, the default was a relatively conservative 10. This results
in a 100ms delay, so with ~300 discards in a commit, it takes the full
30s till the next commit to finish the discards. On a workstation, this
results in the disk never going idle, wasting power/battery, etc.
Set the default to 1000, which results in using the smallest possible
delay, currently, which is 1ms. This has shown to not pathologically
keep the disk busy by the original reporter.
Link: https://lore.kernel.org/linux-btrfs/Y%2F+n1wS%2F4XAH7X1p@nz/
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2182228
CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Neal Gompa <neal@gompa.dev
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the scrub rework, the following RAID56 functions are no longer
called:
- raid56_add_scrub_pages()
- raid56_alloc_missing_rbio()
- raid56_submit_missing_rbio()
Those functions are all utilized by scrub to handle missing device cases
for RAID56.
However the new scrub code handle them in a completely different way:
- If it's data stripe, go recovery path through btrfs_submit_bio()
- If it's P/Q stripe, it would be handled through
raid56_parity_submit_scrub_rbio()
And that function would handle dev-replace and repair properly.
Thus we can safely remove those functions.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since scrub path has been fully moved to scrub_stripe based facilities,
no more scrub_bio would be submitted.
Thus we can remove it completely, this involves:
- SCRUB_SECTORS_PER_BIO macro
- SCRUB_BIOS_PER_SCTX macro
- SCRUB_MAX_PAGES macro
- BTRFS_MAX_MIRRORS macro
- scrub_bio structure
- scrub_ctx::bios member
- scrub_ctx::curr member
- scrub_ctx::bios_in_flight member
- scrub_ctx::workers_pending member
- scrub_ctx::list_lock member
- scrub_ctx::list_wait member
- function scrub_bio_end_io_worker()
- function scrub_pending_bio_inc()
- function scrub_pending_bio_dec()
- function scrub_throttle()
- function scrub_submit()
- function scrub_find_csum()
- function drop_csum_range()
- Some unnecessary flush and scrub pauses
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Those two structures are used to represent a bunch of sectors for scrub,
but now they are fully replaced by scrub_stripe in one go, so we can
remove them. This involves:
- structure scrub_block
- structure scrub_sector
- structure scrub_page_private
- function attach_scrub_page_private()
- function detach_scrub_page_private()
Now we no longer need to use page::private to handle subpage.
- function alloc_scrub_block()
- function alloc_scrub_sector()
- function scrub_sector_get_page()
- function scrub_sector_get_page_offset()
- function scrub_sector_get_kaddr()
- function bio_add_scrub_sector()
- function scrub_checksum_data()
- function scrub_checksum_tree_block()
- function scrub_checksum_super()
- function scrub_check_fsid()
- function scrub_block_get()
- function scrub_block_put()
- function scrub_sector_get()
- function scrub_sector_put()
- function scrub_bio_end_io()
- function scrub_block_complete()
- function scrub_add_sector_to_rd_bio()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old scrub code has different entrance to verify the content, and
since we have removed the writeback path, now we can start removing the
re-check part, including:
- scrub_recover structure
- scrub_sector::recover member
- function scrub_setup_recheck_block()
- function scrub_recheck_block()
- function scrub_recheck_block_checksum()
- function scrub_repair_block_group_good_copy()
- function scrub_repair_sector_from_good_copy()
- function scrub_is_page_on_raid56()
- function full_stripe_lock()
- function search_full_stripe_lock()
- function get_full_stripe_logical()
- function insert_full_stripe_lock()
- function lock_full_stripe()
- function unlock_full_stripe()
- btrfs_block_group::full_stripe_locks_root member
- btrfs_full_stripe_locks_tree structure
This infrastructure is to ensure RAID56 scrub is properly handling
recovery and P/Q scrub correctly.
This is no longer needed, before P/Q scrub we will wait for all
the involved data stripes to be scrubbed first, and RAID56 code has
internal lock to ensure no race in the same full stripe.
- function scrub_print_warning()
- function scrub_get_recover()
- function scrub_put_recover()
- function scrub_handle_errored_block()
- function scrub_setup_recheck_block()
- function scrub_bio_wait_endio()
- function scrub_submit_raid56_bio_wait()
- function scrub_recheck_block_on_raid56()
- function scrub_recheck_block()
- function scrub_recheck_block_checksum()
- function scrub_repair_block_from_good_copy()
- function scrub_repair_sector_from_good_copy()
And two more functions exported temporarily for later cleanup:
- alloc_scrub_sector()
- alloc_scrub_block()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the whole scrub path has been switched to scrub_stripe based
solution, the old writeback path can be removed completely, which
involves:
- scrub_ctx::wr_curr_bio member
- scrub_ctx::flush_all_writes member
- function scrub_write_block_to_dev_replace()
- function scrub_write_sector_to_dev_replace()
- function scrub_add_sector_to_wr_bio()
- function scrub_wr_submit()
- function scrub_wr_bio_end_io()
- function scrub_wr_bio_end_io_worker()
And one more function needs to be exported temporarily:
- scrub_sector_get()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The structure scrub_parity is used to indicate that some extents are
scrubbed for the purpose of RAID56 P/Q scrubbing.
Since the whole RAID56 P/Q scrubbing path has been replaced with new
scrub_stripe infrastructure, and we no longer need to use scrub_parity
to modify the behavior of data stripes, we can remove it completely.
This removal involves:
- scrub_parity_workers
Now only one worker would be utilized, scrub_workers, to do the read
and repair.
All writeback would happen at the main scrub thread.
- scrub_block::sparity member
- scrub_parity structure
- function scrub_parity_get()
- function scrub_parity_put()
- function scrub_free_parity()
- function __scrub_mark_bitmap()
- function scrub_parity_mark_sectors_error()
- function scrub_parity_mark_sectors_data()
These helpers are no longer needed, scrub_stripe has its bitmaps and
we can use bitmap helpers to get the error/data status.
- scrub_parity_bio_endio()
- scrub_parity_check_and_repair()
- function scrub_sectors_for_parity()
- function scrub_extent_for_parity()
- function scrub_raid56_data_stripe_for_parity()
- function scrub_raid56_parity()
The new code would reuse the scrub read-repair and writeback path.
Just skip the dev-replace phase.
And scrub_stripe infrastructure allows us to submit and wait for those
data stripes before scrubbing P/Q, without extra infrastructure.
The following two functions are temporarily exported for later cleanup:
- scrub_find_csum()
- scrub_add_sector_to_rd_bio()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Implement the only missing part for scrub: RAID56 P/Q stripe scrub.
The workflow is pretty straightforward for the new function,
scrub_raid56_parity_stripe():
- Go through the regular scrub path for each data stripe
- Wait for the verification and repair to finish
- Writeback the repaired sectors to data stripes
- Make sure all stripes are properly repaired
If we have sectors unrepaired, we cannot continue, or we could further
corrupt the P/Q stripe.
- Submit the rbio for P/Q stripe
The dev-replace would be handled inside
raid56_parity_submit_scrub_rbio() path.
- Wait for the above bio to finish
Although the old code is no longer used, we still keep the declaration,
as the cleanup can be several times larger than this patch itself.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Switch scrub_simple_mirror() to the new scrub_stripe infrastructure.
Since scrub_simple_mirror() is the core part of scrub (only RAID56
P/Q stripes don't utilize it), we can get rid of a big chunk of code,
mostly scrub_extent(), scrub_sectors() and directly called functions.
There is a functionality change:
- Scrub speed throttle now only affects read on the scrubbing device
Writes (for repair and replace), and reads from other mirrors won't
be limited by the set limits.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper, queue_scrub_stripe(), would try to queue a stripe for
scrub. If all stripes are already in use, we will submit all the
existing ones and wait for them to finish.
Currently we would queue up to 8 stripes, to enlarge the blocksize to
512KiB to improve the performance. Sectors repaired on zoned need to be
relocated instead of in-place fix.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper, scrub_stripe_report_errors(), will report the result of
the scrub to system log.
The main reporting is done by introducing a new helper,
scrub_print_common_warning(), which is mostly the same content from
scrub_print_wanring(), but without the need for a scrub_block.
Since we're reporting the errors, it's the perfect time to update the
scrub stats too.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a new helper, scrub_write_sectors(), to submit write bios for
specified sectors to the target disk.
There are several differences compared to read path:
- Utilize btrfs_submit_scrub_write()
Now we still rely on the @mirror_num based writeback, but the
requirement is also a little different than regular writeback or read,
thus we have to call btrfs_submit_scrub_write().
- We cannot write the full stripe back
We can only write the sectors we have. There will be two call sites
later, one for repaired sectors, one for all utilized sectors of
dev-replace.
Thus the callers should specify their own write_bitmap.
This function only submit the bios, will not wait for them unless for
zoned case.
Caller must explicitly wait for the IO to finish.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper, scrub_stripe_read_repair_worker(), would handle the
read-repair part:
- Wait for the previous submitted read IO to finish
- Verify the contents of the stripe
- Go through the remaining mirrors, using as large blocksize as possible
At this stage, we just read out all the failed sectors from each
mirror and re-verify.
If no more failed sector, we can exit.
- Go through all mirrors again, sector-by-sector
This time, we read sector by sector, this is to address cases where
one bad sector mismatches the drive's internal checksum, and cause the
whole read range to fail.
We put this recovery method as the last resort, as sector-by-sector
reading is slow, and reading from other mirrors may have already fixed
the errors.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper, scrub_verify_stripe(), shares the same main workflow of
the old scrub code.
The major differences are:
- How pages/page_offset is grabbed
Everything can be grabbed from scrub_stripe easily.
- When error report happens
Currently the helper only verifies the sectors, not really doing any
error reporting.
The error reporting would be done after we have done the repair.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper, scrub_verify_one_metadata(), is almost the same as
scrub_checksum_tree_block().
The difference is in how we grab the pages from other structures.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper will search the extent tree to find the first extent of a
logical range, then fill the sectors array by two loops:
- Loop 1 to fill common bits and metadata generation
- Loop 2 to fill csum data (only for data bgs)
This loop will use the new btrfs_lookup_csums_bitmap() to fill
the full csum buffer, and set scrub_sector_verification::csum.
With all the needed info filled by this function, later we only need to
submit and verify the stripe.
Here we temporarily export the helper to avoid warning on unused static
function.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch introduces the following structures:
- scrub_sector_verification
Contains all the needed info to verify one sector (data or metadata).
- scrub_stripe
Contains all needed members (mostly bitmap based) to scrub one stripe
(with a length of BTRFS_STRIPE_LEN).
The basic idea is, we keep the existing per-device scrub behavior, but
merge all the scrub_bio/scrub_bio into one generic structure, and read
the full BTRFS_STRIPE_LEN stripe on the first try.
This means we will read some sectors which are not scrub target, but
that's fine. At dev-replace time we only writeback the utilized and good
sectors, and for read-repair we only writeback the repaired sectors.
With every read submitted in BTRFS_STRIPE_LEN, the need for complex bio
form shaping would be gone.
Although to get the same performance of the old scrub behavior, we would
need to submit the initial read for two stripes at once.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Both scrub and read-repair are utilizing a special repair writes that:
- Only writes back to a single device
Even for read-repair on RAID56, we only update the corrupted data
stripe itself, not triggering the full RMW path.
- Requires a valid @mirror_num
For RAID56 case, only @mirror_num == 1 is valid.
For non-RAID56 cases, we need @mirror_num to locate our stripe.
- No data csum generation needed
These two call sites still have some differences though:
- Read-repair goes plain bio
It doesn't need a full btrfs_bio, and goes submit_bio_wait().
- New scrub repair would go btrfs_bio
To simplify both read and write path.
So here this patch would:
- Introduce a common helper, btrfs_map_repair_block()
Due to the single device nature, we can use an on-stack
btrfs_io_stripe to pass device and its physical bytenr.
- Introduce a new interface, btrfs_submit_repair_bio(), for later scrub
code
This is for the incoming scrub code.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we're doing a lot of work for btrfs_bio:
- Checksum verification for data read bios
- Bio splits if it crosses stripe boundary
- Read repair for data read bios
However for the incoming scrub patches, we don't want this extra
functionality at all, just plain logical + mirror -> physical mapping
ability.
Thus here we do the following changes:
- Introduce btrfs_bio::fs_info
This is for the new scrub specific btrfs_bio, which would not populate
btrfs_bio::inode.
Thus we need such new member to grab a fs_info
This new member will always be populated.
- Replace @inode argument with @fs_info for btrfs_bio_init() and its
caller
Since @inode is no longer a mandatory member, replace it with
@fs_info, and let involved users populate @inode.
- Skip checksum verification and generation if @bbio->inode is NULL
- Add extra ASSERT()s
To make sure:
* bbio->inode is properly set for involved read repair path
* if @file_offset is set, bbio->inode is also populated
- Grab @fs_info from @bbio directly
We can no longer go @bbio->inode->root->fs_info, as bbio->inode can be
NULL. This involves:
* btrfs_simple_end_io()
* should_async_write()
* btrfs_wq_submit_bio()
* btrfs_use_zone_append()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is really no need to go through the super complex scrub_sectors()
to just handle super blocks. Introduce a dedicated function to handle
super block scrubbing.
This new function will introduce a behavior change, instead of using the
complex but concurrent scrub_bio system, here we just go submit-and-wait.
There is really not much sense to care the performance of super block
scrubbing. It only has 3 super blocks at most, and they are all
scattered around the devices already.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 321f69f86a ("btrfs: reset device back to allocation state when
removing") included adding extent_io_tree_release(&device->alloc_state)
to btrfs_close_one_device(), which had already been called in
btrfs_free_device().
The alloc_state tree (IO_TREE_DEVICE_ALLOC_STATE), is created in
btrfs_alloc_device() and released in btrfs_close_one_device(). Therefore,
the additional call to extent_io_tree_release(&device->alloc_state) in
btrfs_free_device() is unnecessary and can be removed.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During my recent search for the root cause of a reported bug, I realized
that it's a good idea to issue a warning for missed cleanup instead of
using debug-only assertions. Since most installations run with debug off,
missed cleanups and premature calls to close could go unnoticed. However,
these issues are serious enough to warrant reporting and fixing.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs can use various different checksumming algorithms, and prints
the one used for a given file system at mount time. Don't bother
printing the crc32c implementation at module load time, the information
is available in /sys/fs/btrfs/FSID/checksum.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The tree-log code has three almost identical copies for the accounting on
an extent_buffer that doesn't need to be written any more. The only
difference is that walk_down_log_tree passed the bytenr used to find the
buffer instead of extent_buffer.start and calculates the length using the
nodesize, while the other two callers look at the extent_buffer.len
field that must always be equivalent to the nodesize.
Factor the code into a common helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Guard all the code to punt bios to a per-cgroup submission helper by a
new CONFIG_BLK_CGROUP_PUNT_BIO symbol that is selected by btrfs.
This way non-btrfs kernel builds don't need to have this code.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
REQ_CGROUP_PUNT is a bit annoying as it is hard to follow and adds
a branch to the bio submission hot path. To fix this, export
blkcg_punt_bio_submit and let btrfs call it directly. Add a new
REQ_FS_PRIVATE flag for btrfs to indicate to it's own low-level
bio submission code that a punt to the cgroup submission helper
is required.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
punt_to_cgroup is only used by extent_write_locked_range, but that
function also directly controls the bio flags for the actual submission.
Remove th punt_to_cgroup field, and just set REQ_CGROUP_PUNT directly
in extent_write_locked_range.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
submit_one_async_extent needs to use submit_one_async_extent no matter
if the range it handles ends up beeing compressed or not as the deadlock
risk due to cgroup thottling is the same. Call kthread_associate_blkcg
earlier to cover submit_uncompressed_range case as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Let submit_one_async_extent, which is the only caller of
submit_uncompressed_range handle freeing of the async_extent in one
central place.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_submit_compressed_write should not have to care if it is called
from a helper thread or not. Move the kthread_associate_blkcg handling
into submit_one_async_extent, as that is the one caller that needs it.
Also move the assignment of REQ_CGROUP_PUNT into cow_file_range_async,
as that is the routine that sets up the helper thread offload.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When starting a transaction, we are assuming the number of bytes used for
each delayed ref update matches the number of bytes used for each item
update, that is the return value of:
btrfs_calc_insert_metadata_size(fs_info, num_items)
However that is not correct when we are using the free space tree, as we
need to multiply that value by 2, since delayed ref updates need to modify
the free space tree besides the extent tree.
So fix this by using btrfs_calc_delayed_ref_bytes() to get the correct
number of bytes used for delayed ref updates.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When starting a transaction we are comparing the result of a call to
btrfs_block_rsv_full() with 0, but the function returns a boolean. While
in practice it is not incorrect, as 0 is equivalent to false, it makes it
a bit odd and less readable. So update the check to not compare against 0
and instead use the logical not (!) operator.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If an application is doing direct io to a btrfs file and experiences a
page fault reading from the write buffer, iomap will issue a partial
bio, and allow the fs to keep going. However, there was a subtle bug in
this code path in the btrfs dio iomap implementation that led to the
partial write ending up as a gap in the file's extents and to be read
back as zeros.
The sequence of events in a partial write, lightly summarized and
trimmed down for brevity is as follows:
==== WRITING TASK ====
btrfs_direct_write
__iomap_dio_write
iomap_iter
btrfs_dio_iomap_begin # create full ordered extent
iomap_dio_bio_iter
bio_iov_iter_get_pages # page fault; partial read
submit_bio # partial bio
iomap_iter
btrfs_dio_iomap_end
btrfs_mark_ordered_io_finished # sets BTRFS_ORDERED_IOERR;
# submit to finish_ordered_fn wq
fault_in_iov_iter_readable # btrfs_direct_write detects partial write
__iomap_dio_write
iomap_iter
btrfs_dio_iomap_begin # create second partial ordered extent
iomap_dio_bio_iter
bio_iov_iter_get_pages # read all of remainder
submit_bio # partial bio with all of remainder
iomap_iter
btrfs_dio_iomap_end # nothing exciting to do with ordered io
==== DIO ENDIO ====
== FIRST PARTIAL BIO ==
btrfs_dio_end_io
btrfs_mark_ordered_io_finished # bytes_left > 0
# don't submit to finish_ordered_fn wq
== SECOND PARTIAL BIO ==
btrfs_dio_end_io
btrfs_mark_ordered_io_finished # bytes_left == 0
# submit to finish_ordered_fn wq
==== BTRFS FINISH ORDERED WQ ====
== FIRST PARTIAL BIO ==
btrfs_finish_ordered_io # called by dio_iomap_end_io, sees
# BTRFS_ORDERED_IOERR, just drops the
# ordered_extent
==SECOND PARTIAL BIO==
btrfs_finish_ordered_io # called by btrfs_dio_end_io, writes out file
# extents, csums, etc...
The essence of the problem is that while btrfs_direct_write and iomap
properly interact to submit all the correct bios, there is insufficient
logic in the btrfs dio functions (btrfs_dio_iomap_begin,
btrfs_dio_submit_io, btrfs_dio_end_io, and btrfs_dio_iomap_end) to
ensure that every bio is at least a part of a completed ordered_extent.
And it is completing an ordered_extent that results in crucial
functionality like writing out a file extent for the range.
More specifically, btrfs_dio_end_io treats the ordered extent as
unfinished but btrfs_dio_iomap_end sets BTRFS_ORDERED_IOERR on it.
Thus, the finish io work doesn't result in file extents, csums, etc.
In the aftermath, such a file behaves as though it has a hole in it,
instead of the purportedly written data.
We considered a few options for fixing the bug:
1. treat the partial bio as if we had truncated the file, which would
result in properly finishing it.
2. split the ordered extent when submitting a partial bio.
3. cache the ordered extent across calls to __iomap_dio_rw in
iter->private, so that we could reuse it and correctly apply
several bios to it.
I had trouble with 1, and it felt the most like a hack, so I tried 2
and 3. Since 3 has the benefit of also not creating an extra file
extent, and avoids an ordered extent lookup during bio submission, it
felt like the best option. However, that turned out to re-introduce a
deadlock which this code discarding the ordered_extent between faults
was meant to fix in the first place. (Link to an explanation of the
deadlock below.)
Therefore, go with fix 2, which requires a bit more setup work but fixes
the corruption without introducing the deadlock, which is fundamentally
caused by the ordered extent existing when we attempt to fault in a
range that overlaps with it.
Put succinctly, what this patch does is: when we submit a dio bio, check
if it is partial against the ordered extent stored in dio_data, and if it
is, extract the ordered_extent that matches the bio exactly out of the
larger ordered_extent. Keep the remaining ordered_extent around in dio_data
for cancellation in iomap_end.
Thanks to Josef, Christoph, and Filipe with their help figuring out the
bug and the fix.
Fixes: 51bd9563b6 ("btrfs: fix deadlock due to page faults during direct IO reads and writes")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2169947
Link: https://lore.kernel.org/linux-btrfs/aa1fb69e-b613-47aa-a99e-a0a2c9ed273f@app.fastmail.com/
Link: https://pastebin.com/3SDaH8C6
Link: https://lore.kernel.org/linux-btrfs/20230315195231.GW10580@twin.jikos.cz/T/#t
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Boris Burkov <boris@bur.io>
[ hch: refactored the ordered_extent extraction ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
NOCOW writes just overwrite an existing extent map, which thus should
not be split in btrfs_extract_ordered_extent. The NOCOW case can't
currently happen as btrfs_extract_ordered_extent is only used on zoned
devices that do not support NOCOW writes, but this will change soon.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Boris Burkov <boris@bur.io>
[ hch: split from a larger patch, wrote a commit log ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
To prepare for a new caller that already has the ordered_extent
available, change btrfs_extract_ordered_extent to take an argument
for it. Add a wrapper for the bio case that still has to do the
lookup (for now).
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
split_zoned_em is only ever asked to split out the beginning of an extent
map. Change it to only take a len to split out instead of a pre and post
region.
Also rename the function to split_extent_map as there is nothing zoned
device specific about it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_clone_ordered_extent is very specific to the usage in
btrfs_split_ordered_extent. Now that only a single call to
btrfs_clone_ordered_extent is left, just fold it into
btrfs_split_ordered_extent to make the operation more clear.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_split_ordered_extent is only ever asked to split out the beginning
of an ordered_extent (i.e. post == 0). Change it to only take a len to
split out, and switch it to allocate the new extent for the beginning,
as that helps with callers that want to keep a pointer to the
ordered_extent that it is stealing from.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_extract_ordered_extent is always used to split an ordered_extent
and extent_map into two parts, so it doesn't need to deal with a three
way split.
Simplify it by only allowing for a single split point, and always split
out the beginning of the extent, as that is what we'll later need to
be able to hold on to a reference to the original ordered_extent that
the first part is split off for submission.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Move the three checks that are about ordered extent internal sanity
checking into btrfs_split_ordered_extent instead of doing them in the
higher level btrfs_extract_ordered_extent routine.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While it is not feasible for an ordered extent to survive across the
calls btrfs_direct_write makes into __iomap_dio_rw, it is still helpful
to stash it on the dio_data in between creating it in iomap_begin and
finishing it in either end_io or iomap_end.
The specific use I have in mind is that we can check if a particular bio
is partial in submit_io without unconditionally looking up the ordered
extent. This is a preparatory patch for a later patch which does just
that.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The ordered_extent flags are declared as unsigned long, so pass them as
such to btrfs_add_ordered_extent.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Boris Burkov <boris@bur.io>
[ hch: split from a larger patch ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, btrfs_add_ordered_extent allocates a new ordered extent, adds
it to the rb_tree, but doesn't return a referenced pointer to the
caller. There are cases where it is useful for the creator of a new
ordered_extent to hang on to such a pointer, so add a new function
btrfs_alloc_ordered_extent which is the same as
btrfs_add_ordered_extent, except it takes an additional reference count
and returns a pointer to the ordered_extent. Implement
btrfs_add_ordered_extent as btrfs_alloc_ordered_extent followed by
dropping the new reference and handling the IS_ERR case.
The type of flags in btrfs_alloc_ordered_extent and
btrfs_add_ordered_extent is changed from unsigned int to unsigned long
so it's unified with the other ordered extent functions.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The btrfs raid56 sector submission code uses bio_add_page() to add a
page to a newly created bio. bio_add_page() can fail, but the return
value is never checked.
Use __bio_add_page() as adding a single page to a newly created bio is
guaranteed to succeed.
This brings us a step closer to marking bio_add_page() as __must_check.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The btrfs repair bio submission code uses bio_add_page() to add a page
to a newly created bio. bio_add_page() can fail, but the return value is
never checked.
Use __bio_add_page() as adding a single page to a newly created bio is
guaranteed to succeed.
This brings us a step closer to marking bio_add_page() as __must_check.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function wait_dev_flush() tests for the BTRFS_DEV_STATE_FLUSH_SENT
bit and then clears it separately. Instead, use test_and_clear_bit().
Though we don't need to do the atomic test and clear, it's following a
common pattern.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The flush error code is maintained in btrfs_device::last_flush_error, so
there is no point in returning it in wait_dev_flush() when it is not being
used. Instead, we can return a boolean value.
Note that even though btrfs_device::last_flush_error may not be used, we
will keep it for now.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
check_barrier_error() is almost a single line function, and just calls
btrfs_check_rw_degradable(). Instead, open code it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We parallelize the flush command across devices using our own code,
write_dev_flush() sends the flush command to each device and
wait_dev_flush() waits for the flush to complete on all devices. Errors
from each device are recorded at device->last_flush_error and reset to
BLK_STS_OK in write_dev_flush() and to the error, if any, in
wait_dev_flush(). These functions are called from barrier_all_devices().
This patch consolidates the use of device->last_flush_error in
write_dev_flush() and wait_dev_flush() to remove it from
barrier_all_devices().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using two labels at btrfs_evict_inode() for exiting depending
on whether we need to delete the inode items and orphan or some error
happened, we can use a single exit label if we initialize the block
reserve to NULL, since btrfs_free_block_rsv() ignores a NULL block reserve
pointer. So just do that. It will also make an upcoming change simpler by
avoiding one extra error label.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When updating the global block reserve, we account for the 6 items needed
by an unlink operation and the 6 delayed references for each one of those
items. However the calculation for the delayed references is not correct
in case we have the free space tree enabled, as in that case we need to
touch the free space tree as well and therefore need twice the number of
bytes. So use the btrfs_calc_delayed_ref_bytes() helper to calculate the
number of bytes need for the delayed references at
btrfs_update_global_block_rsv().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of hard coding the number of metadata units for an unlink operation
in a couple places, define a macro and use it instead. This eliminates the
problem of one place getting out of sync with the other, such as recently
fixed by the previous patch in the series ("btrfs: fix calculation of the
global block reserve's size").
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_update_global_block_rsv(), we are assuming an unlink operation
uses 5 metadata units, but that's not true anymore, it uses 6 since the
commit bca4ad7c0b ("btrfs: reserve correct number of items for unlink
and rmdir"). So update the code and comments to consider 6 units.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When evicting an inode, we are incorrectly calculating the amount of space
required for a single delayed reference in case the free space tree is
enabled. We have to multiply by 2 the result of
btrfs_calc_insert_metadata_size(). We should be calculating according to
the size update and space release of the delayed block reserve logic at
btrfs_update_delayed_refs_rsv() and btrfs_delayed_refs_rsv_release().
Fix this by using the btrfs_calc_delayed_ref_bytes() helper at
evict_refill_and_join() instead of btrfs_calc_insert_metadata_size().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of duplicating the logic for calculating how much space is
required for a given number of delayed references, add an inline helper
to encapsulate that logic and use it everywhere we are calculating the
space required.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that btrfs_calc_insert_metadata_size() can take a const fs_info
argument, make the fs_info argument of calc_reclaim_items_nr() and of
calc_delayed_refs_nr() const as well.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fs_info argument of the helpers btrfs_calc_insert_metadata_size() and
btrfs_calc_metadata_size() is not modified so it can be const. This will
also allow a new helper function in one of the next patches to have its
fs_info argument as const.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When flushing a limited number of delayed references (FLUSH_DELAYED_REFS_NR
state), we are assuming each delayed reference is holding a number of bytes
matching the needed space for inserting for a single metadata item (the
result of btrfs_calc_insert_metadata_size()). That is not correct when
using the free space tree, as in that case we have to multiply that value
by 2 since we need to touch the free space tree as well. This is the same
computation as we do at btrfs_update_delayed_refs_rsv() and at
btrfs_delayed_refs_rsv_release().
So correct the computation for the amount of delayed references we need to
flush in case we have the free space tree. This does not fix a functional
issue, instead it makes the flush code flush less delayed references, only
the minimum necessary to satisfy a ticket.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When refilling the delayed block reserve we are incorrectly computing the
amount of bytes for a single delayed reference if the free space tree is
being used. In that case we should double the calculated amount.
Everywhere else we compute the correct amount, like when updating the
delayed block reserve, at btrfs_update_delayed_refs_rsv(), or when
releasing space from the delayed block reserve, at
btrfs_delayed_refs_rsv_release().
So fix btrfs_delayed_refs_rsv_refill() to multiply the amount of bytes for
a single delayed reference by two in case the free space tree is used.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During inode eviction, if we are truncating a deleted inode, we don't add
delayed items for our inode, so there's no need to throttle on delayed
items on each iteration of the loop that truncates inode items from its
subvolume tree. But we dirty extent buffers from its subvolume tree, so
we only need to throttle on btree inode dirty pages.
So use btrfs_btree_balance_dirty_nodelay() in the loop that truncates
inode items.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have this logic encapsulated in btrfs_should_throttle_delayed_refs()
where we try to estimate if running the current amount of delayed
references we have will take more than half a second, and if so, the
caller btrfs_should_throttle_delayed_refs() should do something to
prevent more and more delayed refs from being accumulated.
This logic was added in commit 0a2b2a844a ("Btrfs: throttle delayed
refs better") and then further refined in commit a79b7d4b3e ("Btrfs:
async delayed refs"). The idea back then was that the caller of
btrfs_should_throttle_delayed_refs() would release its transaction
handle (by calling btrfs_end_transaction()) when that function returned
true, then btrfs_end_transaction() would trigger an async job to run
delayed references in a workqueue, and later start/join a transaction
again and do more work.
However we don't run delayed references asynchronously anymore, that
was removed in commit db2462a6ad ("btrfs: don't run delayed refs in
the end transaction logic"). That makes the logic that tries to estimate
how long we will take to run our current delayed references, at
btrfs_should_throttle_delayed_refs(), pointless as we don't take any
action to run delayed references anymore. We do have other type of
throttling, which consists of checking the size and reserved space of
the delayed and global block reserves, as well as if fluhsing delayed
references for the current transaction was already started, etc - this
is all done by btrfs_should_end_transaction(), and the only user of
btrfs_should_throttle_delayed_refs() does periodically call
btrfs_should_end_transaction().
So remove btrfs_should_throttle_delayed_refs() and the infrastructure
that keeps track of the average time used for running delayed references,
as well as adapting btrfs_truncate_inode_items() to call
btrfs_check_space_for_delayed_refs() instead.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_block_rsv_refill(), there's no point in initializing the
'num_bytes' variable to 0 and then, after taking the block reserve's
spinlock, initializing it to the value of the 'min_reserved' parameter.
So just get rid of the 'num_bytes' local variable and rename the
'min_reserved' parameter to 'num_bytes'.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_truncate_inode_items(), in the while loop when we decide that we
are going to delete an item, it's pointless to check that 'pending_del_nr'
is non-zero in an else clause because the corresponding if statement is
checking if 'pending_del_nr' has a value of zero. So just remove that
condition from the else clause.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When reserving metadata space for delalloc (and direct IO too), at
btrfs_delalloc_reserve_metadata(), there's no need to count the number of
extents while holding the inode's spinlock, since that does not require
access to any field of the inode.
This section of code can be called concurrently, when we have direct IO
writes against different file ranges that don't increase the inode's
i_size, so it's beneficial to shorten the critical section by counting
the number of extents before taking the inode's spinlock.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The only caller of btrfs_make_block_group() always passes 0 as the value
for the bytes_used argument, so remove it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function should_end_transaction() is very short and only has one
caller, which is btrfs_should_end_transaction(). So move the code from
should_end_transaction() into btrfs_should_end_transaction().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_should_throttle_delayed_refs() returns 1 or 2 in case the
delayed refs should be throttled, however the only caller (inode eviction
and truncation path) does not care about those two different conditions,
it treats the return value as a boolean. This allows us to remove one of
the conditions in btrfs_should_throttle_delayed_refs() and change its
return value from 'int' to 'bool'. So just do that.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At space-info.c:__reserve_bytes(), instead of initializing 'ret' to 0 when
it's declared and then shortly after set it to -ENOSPC under the space
info's spinlock, initialize it to -ENOSPC when declaring it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When reserving space, at space-info.c:__reserve_bytes(), we assert that
either the current task is not holding a transacion handle, or, if it is,
that the flush method is not BTRFS_RESERVE_FLUSH_ALL. This is because that
flush method can trigger transaction commits, and therefore could lead to
a deadlock.
However there are other 2 flush methods that can trigger transaction
commits:
1) BTRFS_RESERVE_FLUSH_ALL_STEAL
2) BTRFS_RESERVE_FLUSH_EVICT
So update the assertion to check the flush method is also not one those
two methods if the current task is holding a transaction handle.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The BTRFS_RESERVE_FLUSH_EVICT flush method can also commit transactions,
see the definition of the evict_flush_states const array at space-info.c,
but the documentation for it at space-info.h does not mention it.
So update the documentation.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The block reserve passed to btrfs_block_rsv_check() is never NULL, so
remove the check. In case it can ever become NULL in the future, then
we'll get a pretty obvious and clear NULL pointer dereference crash and
stack trace.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_delayed_refs_rsv_refill(), we are passing a value of 0 to the
'update_size' argument of btrfs_block_rsv_add_bytes(), which is defined
as a boolean. Functionally this is fine because a 0 is, implicitly,
converted to a boolean false value. However it's easier to read an
explicit 'false' value, so just pass 'false' instead of 0.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The last argument of btrfs_block_rsv_migrate() is a boolean, but we are
passing an integer, with a value of 1, to it at evict_refill_and_join().
While this is not a bug, due to type conversion, it's a lot more clear to
simply pass the boolean true value instead. So just do that.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's not used anywhere at the moment, but it was used in earlier version
of a patch that removed its use in the second version. So just remove
btrfs_lru_cache_is_full().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_add_compressed_bio_pages is needlessly complicated. Instead
of iterating over the logic disk offset just to add pages to the bio
use a simple offset starting at 0, which also removes most of the
claiming. Additionally __bio_add_pages already takes care of the
assert that the bio is always properly sized, and btrfs_submit_bio
called right after asserts that the bio size is non-zero.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Adding pages to a bio has nothing to do with the sector. Move the
assignment to the two callers in preparation for cleaning up
btrfs_add_compressed_bio_pages.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, /sys/fs/btrfs/<UUID>/bg_reclaim_threshold is limited to 0
(disable) or [50 .. 100]%, so we need to fill 50% of a device to start the
auto reclaim process. It is cumbersome to do so when we want to shake out
possible race issues of normal write vs reclaim.
Relax the threshold check under the BTRFS_DEBUG option.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_split_bio expects a btrfs_bio as argument and always allocates one.
Type both the orig_bio argument and the return value as struct btrfs_bio
to improve type safety.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Return the containing struct btrfs_bio instead of the less type safe
struct bio from btrfs_bio_alloc.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio in struct btrfs_bio_ctrl must be a btrfs_bio, so store a pointer
to the btrfs_bio for better type checking.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
struct btrfs_bio now has an always valid inode pointer that can be used
to find the inode in submit_one_bio, so use that and initialize all
variables for which it is possible at declaration time.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The original bio must be a btrfs_bio, so store a pointer to the
btrfs_bio for better type checking.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_submit_compressed_read expects the bio passed to it to be embedded
into a btrfs_bio structure. Pass the btrfs_bio directly to increase type
safety and make the code self-documenting.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_submit_bio expects the bio passed to it to be embedded into a
btrfs_bio structure. Pass the btrfs_bio directly to increase type
safety and make the code self-documenting.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
All algorithms have to fill the remainder of the orig_bio with zeroes,
so do it in common code.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_encoded_read_regular_fill_pages has a pretty odd control flow.
Unwind it so that there is a single loop over the pages array.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The inode and file_offset members in struct btrfs_encoded_read_private
are unused, so remove them.
Last used in commit 7959bd4411 ("btrfs: remove the start argument to
check_data_csum and export") and commit 7609afac67 ("btrfs: handle
checksum validation and repair at the storage layer").
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The DREW lock uses percpu variable to track lock counters and for that
it needs to allocate the structure. In btrfs_read_tree_root() or
btrfs_init_fs_root() this may add another error case or requires the
NOFS scope protection.
One way is to preallocate the structure as was suggested in
https://lore.kernel.org/linux-btrfs/20221214021125.28289-1-robbieko@synology.com/
We may avoid the allocation altogether if we don't use the percpu
variables but an atomic for the writer counter. This should not make any
difference, the DREW lock is used for truncate and NOCOW writes along
with other IO operations.
The percpu counter for writers has been there since the original commit
8257b2dc3c "Btrfs: introduce btrfs_{start, end}_nocow_write() for
each subvolume". The reason could be to avoid hammering the same
cacheline from all the readers but then the writers do that anyway.
Signed-off-by: David Sterba <dsterba@suse.com>
If no discard mount option is specified, including the NODISCARD option,
we make the async discard the default option then we don't have to call
the clear_opt again to clear the NODISCARD flag. Though this makes no
difference, that the call is redundant has been pointed out several
times so we better remove it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
BTRFS_FEATURE_INCOMPAT_SUPP is defined twice, once under
CONFIG_BTRFS_DEBUG and once without it, resulting in repetitive code. The
reason for this is to add experimental features under CONFIG_BTRFS_DEBUG.
To avoid repetitive code, add a common list BTRFS_FEATURE_INCOMPAT_SUPP_STABLE,
and append experimental features only under CONFIG_BTRFS_DEBUG.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to pass the roots as arguments, reading them from the
rb-tree is cheap. Thus there is really not much need to pre-fetch it
and pass it all the way from scrub_stripe().
And we already have more than enough arguments in scrub_simple_mirror()
and scrub_simple_stripe(), it's better to remove them and only grab
those roots in scrub_simple_mirror().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The variable @path is no longer passed into any call sites after commit
18d30ab961 ("btrfs: scrub: use scrub_simple_mirror() to handle RAID56
data stripe scrub"), thus we can remove the variable completely.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Currently btrfs can use dev-replace device as an extra mirror for
read-repair. But it can lead to NODATASUM corruption in the following
case:
There is a RAID1 data chunk, and dev-replace is running from
dev2 to dev0.
|//| = Replaced data
X X+1MB X+2MB
Dev 2: | | | <- Source dev
Dev 0: |///////| | <- Target dev
Then a read on dev 2 X+2MB happens.
And something wrong happened inside devid 2, causing an -EIO.
In that case, read-repair would try the next mirror, and since we can
use target device as an extra mirror, we will use that mirror instead.
But unfortunately since the read is beyond the current replace cursor,
we should not trust it at all, what we get would be just uninitialized
garbage.
But if this read is for NODATASUM range, then we just trust them and
cause data corruption.
[CAUSE]
We used to have some checks to make sure we only return such extra
mirror when the range is before our left cursor.
The first commit introducing this behavior is ad6d620e2a ("Btrfs:
allow repair code to include target disk when searching mirrors").
But later a fix, 22ab04e814 ("Btrfs: fix race between device replace
and chunk allocation") changed the behavior, to always let
btrfs_map_block() include the extra mirror to address a race in
dev-replace which can cause missing writes to target device.
This means, we lose the tracking of cursor for the extra mirror, thus
can lead to above corruption.
[FIX]
The extra mirror is never a reliable one, at the beginning of
dev-replace, the reliability is zero, while only at the end of the
replace it's a fully reliable mirror.
We either do the complex tracking, or never trust it.
IMHO it's much easier to maintain if we don't trust it at all, and the
extra mirror can only benefit for a limited period of time (during
replace).
Thus this patch would completely remove the ability to use target device
as an extra mirror.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently open_ctree() still uses two variables for error handling, err
and ret. This can be confusing and missing some errors and does not
conform to current coding style.
This patch will fix the problems by:
- Use only ret for error handling
- Add proper ret assignment
Originally we rely on the default value (-EINVAL) of err to handle
errors, but that doesn't really reflects the error.
This will change it use the correct error number for the following
call sites:
* subpage_info allocation
* btrfs_free_extra_devids()
* btrfs_check_rw_degradable()
* cleaner_kthread allocation
* transaction_kthread allocation
- Add an extra ASSERT()
To make sure we error out instead of returning 0.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a bio_offset variable for the current offset into the bio
instead of recalculating it over and over. Remove the now only used
once search_len and sector_offset variables, and reduce the scope for
count and cur_disk_bytenr.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no need to search for a file offset in a bio, it is now always
provided in bbio->file_offset (set at bio allocation time since
0d495430db ("btrfs: set bbio->file_offset in alloc_new_bio")). Just
use that with the offset into the bio.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nowadays calc_bio_boundaries() is a relatively simple function that only
guarantees the one bio equals to one ordered extent rule for uncompressed
Zone Append bios.
Sink it into it's only caller alloc_new_bio().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
bio_add_page always adds either the entire range passed to it or nothing.
Based on that btrfs_bio_add_page can only return a length smaller than
the passed in one when hitting the ordered extent limit, which can only
happen for writes. Given that compressed writes never even use this code
path, this means that all the special cases for compressed extent offset
handling are dead code.
Reflow submit_extent_page to take advantage of this by inlining
btrfs_bio_add_page and handling the ordered extent limit by decrementing
it for each added range and thus significantly simplifying the loop.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Different loop iterations in btrfs_bio_add_page not only have the same
contiguity parameters, but also any non-initial operation operates on a
fresh bio anyway.
Factor out the contiguity check into a new btrfs_bio_is_contig and only
call it once in submit_extent_page before descending into the
bio_add_page loop.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove the has_error and saved_ret variables, and just jump to a goto
label for error handling from the only place returning an error from the
main loop.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
submit_extent_page always returns 0 since commit d5e4377d50 ("btrfs:
split zone append bios in btrfs_submit_bio"). Change it to a void return
type and remove all the unreachable error handling code in the callers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update the compress_type in the btrfs_bio_ctrl after forcing out the
previous bio in btrfs_do_readpage, so that alloc_new_bio can just use
the compress_type member in struct btrfs_bio_ctrl instead of passing the
same information redundantly as a function argument.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rename this_bio_flag to compress_type to match the surrounding code
and better document the intent. Also use the proper enum type instead
of unsigned long.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The compress_type can only change on a per-extent basis. So instead of
checking it for every page in btrfs_bio_add_page, do the check once in
btrfs_do_readpage, which is the only caller of btrfs_bio_add_page and
submit_extent_page that deals with compressed extents.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of passing down the wbc pointer the deep call chain, just
add it to the btrfs_bio_ctrl structure.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The sync_io flag is equivalent to wbc->sync_mode == WB_SYNC_ALL, so
just check for that and remove the separate flag.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio op and flags never change over the life time of a bio_ctrl,
so move it in there instead of passing it down the deep call chain
all the way down to alloc_new_bio.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If force_bio_submit, submit_extent_page simply calls submit_one_bio as
the first thing. This can just be moved to the only caller that sets
force_bio_submit to true.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When read_extent_buffer_subpage calls submit_extent_page, it does
so on a freshly initialized btrfs_bio_ctrl structure that can't have
a valid bio to submit. Clear the force_bio_submit parameter to false
as there is nothing to submit.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_bin_search() is a simple wrapper that searches for the whole slots
by calling btrfs_generic_bin_search() with the starting slot/first_slot
preset to 0.
This simple wrapper can be open coded as btrfs_bin_search().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Although dev replace ioctl has a way to specify the mode on whether we
should read from the source device, it's not properly followed.
# mkfs.btrfs -f -d raid1 -m raid1 $dev1 $dev2
# mount $dev1 $mnt
# xfs_io -f -c "pwrite 0 32M" $mnt/file
# sync
# btrfs replace start -r -f 1 $dev3 $mnt
And one extra trace is added to scrub_submit(), showing the detail about
the bio:
btrfs-11569 [005] ... 37.0270: scrub_submit.part.0: devid=1 logical=22036480 phy=22036480 len=16384
btrfs-11569 [005] ... 37.0273: scrub_submit.part.0: devid=1 logical=30457856 phy=30457856 len=32768
btrfs-11569 [005] ... 37.0274: scrub_submit.part.0: devid=1 logical=30507008 phy=30507008 len=49152
btrfs-11569 [005] ... 37.0274: scrub_submit.part.0: devid=1 logical=30605312 phy=30605312 len=32768
btrfs-11569 [005] ... 37.0275: scrub_submit.part.0: devid=1 logical=30703616 phy=30703616 len=65536
btrfs-11569 [005] ... 37.0281: scrub_submit.part.0: devid=1 logical=298844160 phy=298844160 len=131072
...
btrfs-11569 [005] ... 37.0762: scrub_submit.part.0: devid=1 logical=322961408 phy=322961408 len=131072
btrfs-11569 [005] ... 37.0762: scrub_submit.part.0: devid=1 logical=323092480 phy=323092480 len=131072
One can see that all the reads are submitted to devid 1, even if we have
specified "-r" option to avoid reading from the source device.
[CAUSE]
The dev-replace read mode is only set but not followed by scrub code at
all. In fact, only common read path is properly following the read
mode, but scrub itself has its own read path, thus not following the
mode.
[FIX]
Here we enhance scrub_find_good_copy() to also follow the read mode.
The idea is pretty simple, in the first loop, we avoid the following
devices:
- Missing devices
This is the existing condition
- The source device if the replace wants to avoid it.
And if above loop found no candidate (e.g. replace a single device),
then we discard the 2nd condition, and try again.
Since we're here, also enhance the function scrub_find_good_copy() by:
- Remove the forward declaration
- Makes it return int
To indicates errors, e.g. no good mirror found.
- Add extra error messages
Now with the same trace, "btrfs replace start -r" works as expected:
btrfs-1213 [000] ... 991.9059: scrub_submit.part.0: devid=2 logical=22036480 phy=1064960 len=16384
btrfs-1213 [000] ... 991.9062: scrub_submit.part.0: devid=2 logical=30457856 phy=9486336 len=32768
btrfs-1213 [000] ... 991.9063: scrub_submit.part.0: devid=2 logical=30507008 phy=9535488 len=49152
btrfs-1213 [000] ... 991.9064: scrub_submit.part.0: devid=2 logical=30605312 phy=9633792 len=32768
btrfs-1213 [000] ... 991.9065: scrub_submit.part.0: devid=2 logical=30703616 phy=9732096 len=65536
btrfs-1213 [000] ... 991.9073: scrub_submit.part.0: devid=2 logical=298844160 phy=277872640 len=131072
btrfs-1213 [000] ... 991.9075: scrub_submit.part.0: devid=2 logical=298975232 phy=278003712 len=131072
btrfs-1213 [000] ... 991.9078: scrub_submit.part.0: devid=2 logical=299106304 phy=278134784 len=131072
...
btrfs-1213 [000] ... 991.9474: scrub_submit.part.0: devid=2 logical=318504960 phy=297533440 len=131072
btrfs-1213 [000] ... 991.9476: scrub_submit.part.0: devid=2 logical=318636032 phy=297664512 len=131072
btrfs-1213 [000] ... 991.9479: scrub_submit.part.0: devid=2 logical=318767104 phy=297795584 len=131072
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fold finish_compressed_bio_write into its only caller as there is no
reason to keep them separate.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
No one ever set ->mapping on these pages, so don't bother clearing it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Share the code to free the compressed pages and the array to hold them
into a common helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Factor out a common helper to add the compressed_bio pages to the
bio that is shared by the compressed read and write path.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
struct btrfs_bio now has a file_offset field set up by all submitters.
Use that value combined with the bio size in add_ra_bio_pages to
calculate the last offset in the bio.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
struct btrfs_bio now has a file_offset field set up by all submitters.
Use that in btrfs_submit_compressed_read instead of recalculating the
value.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
em can't be non-NULL after the free_extent_map label. Also remove
the now pointless clearing of em to NULL after freeing it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Embed a btrfs_bio into struct compressed_bio. This avoids potential
(so far theoretical) deadlocks due to nesting of btrfs_bioset allocations
for the original read bio and the compressed bio, and avoids an extra
memory allocation in the I/O path.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_io_context structure, we have a pointer raid_map, which
indicates the logical bytenr for each stripe.
But considering we always call sort_parity_stripes(), the result
raid_map[] is always sorted, thus raid_map[0] is always the logical
bytenr of the full stripe.
So why we waste the space and time (for sorting) for raid_map?
This patch will replace btrfs_io_context::raid_map with a single u64
number, full_stripe_start, by:
- Replace btrfs_io_context::raid_map with full_stripe_start
- Replace call sites using raid_map[0] to use full_stripe_start
- Replace call sites using raid_map[i] to compare with nr_data_stripes.
The benefits are:
- Less memory wasted on raid_map
It's sizeof(u64) * num_stripes vs sizeof(u64).
It'll always save at least one u64, and the benefit grows larger with
num_stripes.
- No more weird alloc_btrfs_io_context() behavior
As there is only one fixed size + one variable length array.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For btrfs dev-replace, we have to duplicate writes to the source
device into the target device.
For non-RAID56, all writes into the same mapped ranges are sharing the
same content, thus they don't really need to bother anything.
(E.g. in btrfs_submit_bio() for non-RAID56 range we just submit the
same write to all involved devices).
But for RAID56, all stripes contain different content, thus we must
have a clear mapping of which stripe is duplicated from which original
stripe.
Currently we use a complex way using tgtdev_map[] array, e.g:
num_tgtdevs = 1
tgtdev_map[0] = 0 <- Means stripes[0] is not involved in replace.
tgtdev_map[1] = 3 <- Means stripes[1] is involved in replace,
and it's duplicated to stripes[3].
tgtdev_map[2] = 0 <- Means stripes[2] is not involved in replace.
But this is wasting some space, and ignores one important thing for
dev-replace, there is at most one running replace.
Thus we can change it to a fixed array to represent the mapping:
replace_nr_stripes = 1
replace_stripe_src = 1 <- Means stripes[1] is involved in replace.
thus the extra stripe is a copy of
stripes[1]
By this we can save some space for bioc on RAID56 chunks with many
devices. And we get rid of one variable sized array from bioc.
Thus the patch involves the following changes:
- Replace @num_tgtdevs and @tgtdev_map[] with @replace_nr_stripes
and @replace_stripe_src.
@num_tgtdevs is just renamed to @replace_nr_stripes.
While the mapping is completely changed.
- Add extra ASSERT()s for RAID56 code
- Only add two more extra stripes for dev-replace cases.
As we have an upper limit on how many dev-replace stripes we can have.
- Unify the behavior of handle_ops_on_dev_replace()
Previously handle_ops_on_dev_replace() go two different paths for
WRITE and GET_READ_MIRRORS.
Now unify them by always going the WRITE path first (with at most 2
replace stripes), then if we're doing GET_READ_MIRRORS and we have 2
extra stripes, just drop one stripe.
- Remove the @real_stripes argument from alloc_btrfs_io_context()
As we don't need the old variable length array any more.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
That structure is our ultimate object for all __btrfs_map_block()
related functions. We have some hard to understand members, like
tgtdev_map, but without any comments.
This patch will improve the situation:
- Add extra comments for num_stripes, mirror_num, num_tgtdevs and
tgtdev_map[]
Especially for the last two members, add a dedicated (thus very long)
comments for them, with example to explain it.
- Shrink those int members to u16.
In fact our on-disk format is only using u16 for num_stripes, thus
no need to use int at all.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no memory re-allocation for handle_ops_on_dev_replace(), thus
we don't need to pass a btrfs_io_context pointer.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are quite some div64 calls inside btrfs_map_block() and its
variants.
Such calls are for @stripe_nr, where @stripe_nr is the number of
stripes before our logical bytenr inside a chunk.
However we can eliminate such div64 calls by just reducing the width of
@stripe_nr from 64 to 32.
This can be done because our chunk size limit is already 10G, with fixed
stripe length 64K.
Thus a U32 is definitely enough to contain the number of stripes.
With such width reduction, we can get rid of slower div64, and extra
warning for certain 32bit arch.
This patch would do:
- Add a new tree-checker chunk validation on chunk length
Make sure no chunk can reach 256G, which can also act as a bitflip
checker.
- Reduce the width from u64 to u32 for @stripe_nr variables
- Replace unnecessary div64 calls with regular modulo and division
32bit division and modulo are much faster than 64bit operations, and
we are finally free of the div64 fear at least in those involved
functions.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs doesn't support stripe lengths other than 64KiB.
This is already set in the tree-checker.
There is really no meaning to record that fixed value in map_lookup for
now, and can all be replaced with BTRFS_STRIPE_LEN.
Furthermore we can use the fix stripe length to do the following
optimization:
- Use BTRFS_STRIPE_LEN_SHIFT to replace some 64bit division
Now we only need to do a right shift.
And the value of BTRFS_STRIPE_LEN itself is already too large for bit
shift, thus if we accidentally use BTRFS_STRIPE_LEN to do bit shift,
a compiler warning would be triggered.
Thus this bit shift optimization would be safe.
- Use BTRFS_STRIPE_LEN_MASK to calculate the offset inside a stripe
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move the remaining code that deals with initializing the btree
inode into btrfs_init_btree_inode instead of splitting it between
that helpers and its only caller.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function search_file_offset_in_bio() finds the file offset in the
file_offset_ret, and we use the return value to indicate if it is
successful, so use bool.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_lookup_bio_sums() and a nested if statement declare
ret respectively as blk_status_t and int.
There is no need to store the return value of
search_file_offset_in_bio() to ret as this is a one-time call.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove btrfs_csum_ptr() and fold it into it's only caller.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These days all the operations that take locks in the raid56.c code are
run from user context (mostly workqueues). Drop all the irqsafe locking
that is not required any more.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We were seeing weird errors when we were testing our btrfs backports
before we had the incorrect level check fix. These errors appeared to
be improper error handling, but error injection testing uncovered that
the errors were a result of corruption that occurred from improper error
handling during snapshot delete.
With snapshot delete if we encounter any errors during walk_down or
walk_up we'll simply return an error, we won't abort the transaction.
This is problematic because we will be dropping references for nodes and
leaves along the way, and if we fail in the middle we will leave the
file system corrupt because we don't know where we left off in the drop.
Fix this by making sure we abort if we hit any errors during the walk
down or walk up operations, as we have no idea what operations could
have been left half done at this point.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
