Let the compile optimize out the entire IPI path, given that we are
obviously not going to use it.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Even for single queue devices there is no point in offloading a polled
completion to the softirq, given that blk_mq_force_complete_rq is called
from the polling thread in that case and thus there are no starvation
issues.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By open coding raise_blk_irq in the only caller, and replacing the
ifdef CONFIG_SMP with an IS_ENABLED check the flow in the caller
can be significantly simplified.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to deduplicate the logic that raises the block softirq.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__blk_complete_request is only called from the blk-mq code, and
duplicates a lot of code from blk-mq.c. Move it there to prepare
for better code sharing and simplifications.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is an issue when tune the number for read and write queues,
if the total queue count was not changed. The hctx->type cannot
be updated, since __blk_mq_update_nr_hw_queues will return directly
if the total queue count has not been changed.
Reproduce:
dmesg | grep "default/read/poll"
[ 2.607459] nvme nvme0: 48/0/0 default/read/poll queues
cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c
48 default
tune the write queues to 24:
echo 24 > /sys/module/nvme/parameters/write_queues
echo 1 > /sys/block/nvme0n1/device/reset_controller
dmesg | grep "default/read/poll"
[ 433.547235] nvme nvme0: 24/24/0 default/read/poll queues
cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c
48 default
The driver's hardware queue mapping is not same as block layer.
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allocation of the driver tag in the case of using a scheduler shares very
little code with the "normal" tag allocation. Split out a new helper to
streamline this path, and untangle it from the complex normal tag
allocation.
This way also avoids to fail driver tag allocation because of inactive hctx
during cpu hotplug, and fixes potential hang risk.
Fixes: bf0beec060 ("blk-mq: drain I/O when all CPUs in a hctx are offline")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Most of blk-mq drivers depend on managed IRQ's auto-affinity to setup
up queue mapping. Thomas mentioned the following point[1]:
"That was the constraint of managed interrupts from the very beginning:
The driver/subsystem has to quiesce the interrupt line and the associated
queue _before_ it gets shutdown in CPU unplug and not fiddle with it
until it's restarted by the core when the CPU is plugged in again."
However, current blk-mq implementation doesn't quiesce hw queue before
the last CPU in the hctx is shutdown. Even worse, CPUHP_BLK_MQ_DEAD is a
cpuhp state handled after the CPU is down, so there isn't any chance to
quiesce the hctx before shutting down the CPU.
Add new CPUHP_AP_BLK_MQ_ONLINE state to stop allocating from blk-mq hctxs
where the last CPU goes away, and wait for completion of in-flight
requests. This guarantees that there is no inflight I/O before shutting
down the managed IRQ.
Add a BLK_MQ_F_STACKING and set it for dm-rq and loop, so we don't need
to wait for completion of in-flight requests from these drivers to avoid
a potential dead-lock. It is safe to do this for stacking drivers as those
do not use interrupts at all and their I/O completions are triggered by
underlying devices I/O completion.
[1] https://lore.kernel.org/linux-block/alpine.DEB.2.21.1904051331270.1802@nanos.tec.linutronix.de/
[hch: different retry mechanism, merged two patches, minor cleanups]
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_alloc_request_hctx is only used for NVMeoF connect commands, so
tailor it to the specific requirements, and don't bother the general
fast path code with its special twinkles.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace various magic -1 constants for tags with BLK_MQ_NO_TAG.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To prepare for wider use of this constant give it a more applicable name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't split request initialization between __blk_mq_alloc_request and
blk_mq_rq_ctx_init. Also remove the op argument as it can be derived
from the blk_mq_alloc_data structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The bio argument is entirely unused, and the request_queue can be passed
through the alloc_data, given that it needs to be filled out for the
low-level tag allocation anyway. Also rename the function to
__blk_mq_alloc_request as the switch between get and alloc in the call
chains is rather confusing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
None of the I/O schedulers actually needs it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drivers may need to bypass error injection for error recovery. Rename
__blk_mq_complete_request() to blk_mq_force_complete_rq() and export
that function so drivers may skip potential fake timeouts after they've
reclaimed lost requests.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the non-"new_io" branch of blk_account_io_start() into separate
function. Fix merge accounting for discards (they were counted as write
merges).
The new blk_account_io_merge_bio() doesn't call update_io_ticks() unlike
blk_account_io_start(), as there is no reason for that.
[hch: rebased]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_make_request currently needs to grab an q_usage_counter
reference when allocating a request. This is because the block layer
grabs one before calling blk_mq_make_request, but also releases it as
soon as blk_mq_make_request returns. Remove the blk_queue_exit call
after blk_mq_make_request returns, and instead let it consume the
reference. This works perfectly fine for the block layer caller, just
device mapper needs an extra reference as the old problem still
persists there. Open code blk_queue_enter_live in device mapper,
as there should be no other callers and this allows better documenting
why we do a non-try get.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need for two queue references.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need for two queue references.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the blk_queue_enter_live calls into the callers, where they can
successively be cleaned up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We must have some way of letting a storage device driver know what
encryption context it should use for en/decrypting a request. However,
it's the upper layers (like the filesystem/fscrypt) that know about and
manages encryption contexts. As such, when the upper layer submits a bio
to the block layer, and this bio eventually reaches a device driver with
support for inline encryption, the device driver will need to have been
told the encryption context for that bio.
We want to communicate the encryption context from the upper layer to the
storage device along with the bio, when the bio is submitted to the block
layer. To do this, we add a struct bio_crypt_ctx to struct bio, which can
represent an encryption context (note that we can't use the bi_private
field in struct bio to do this because that field does not function to pass
information across layers in the storage stack). We also introduce various
functions to manipulate the bio_crypt_ctx and make the bio/request merging
logic aware of the bio_crypt_ctx.
We also make changes to blk-mq to make it handle bios with encryption
contexts. blk-mq can merge many bios into the same request. These bios need
to have contiguous data unit numbers (the necessary changes to blk-merge
are also made to ensure this) - as such, it suffices to keep the data unit
number of just the first bio, since that's all a storage driver needs to
infer the data unit number to use for each data block in each bio in a
request. blk-mq keeps track of the encryption context to be used for all
the bios in a request with the request's rq_crypt_ctx. When the first bio
is added to an empty request, blk-mq will program the encryption context
of that bio into the request_queue's keyslot manager, and store the
returned keyslot in the request's rq_crypt_ctx. All the functions to
operate on encryption contexts are in blk-crypto.c.
Upper layers only need to call bio_crypt_set_ctx with the encryption key,
algorithm and data_unit_num; they don't have to worry about getting a
keyslot for each encryption context, as blk-mq/blk-crypto handles that.
Blk-crypto also makes it possible for request-based layered devices like
dm-rq to make use of inline encryption hardware by cloning the
rq_crypt_ctx and programming a keyslot in the new request_queue when
necessary.
Note that any user of the block layer can submit bios with an
encryption context, such as filesystems, device-mapper targets, etc.
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Define REQ_OP_ZONE_APPEND to append-write sectors to a zone of a zoned
block device. This is a no-merge write operation.
A zone append write BIO must:
* Target a zoned block device
* Have a sector position indicating the start sector of the target zone
* The target zone must be a sequential write zone
* The BIO must not cross a zone boundary
* The BIO size must not be split to ensure that a single range of LBAs
is written with a single command.
Implement these checks in generic_make_request_checks() using the
helper function blk_check_zone_append(). To avoid write append BIO
splitting, introduce the new max_zone_append_sectors queue limit
attribute and ensure that a BIO size is always lower than this limit.
Export this new limit through sysfs and check these limits in bio_full().
Also when a LLDD can't dispatch a request to a specific zone, it
will return BLK_STS_ZONE_RESOURCE indicating this request needs to
be delayed, e.g. because the zone it will be dispatched to is still
write-locked. If this happens set the request aside in a local list
to continue trying dispatching requests such as READ requests or a
WRITE/ZONE_APPEND requests targetting other zones. This way we can
still keep a high queue depth without starving other requests even if
one request can't be served due to zone write-locking.
Finally, make sure that the bio sector position indicates the actual
write position as indicated by the device on completion.
Signed-off-by: Keith Busch <kbusch@kernel.org>
[ jth: added zone-append specific add_page and merge_page helpers ]
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we increase hardware queue count, blk_mq_update_queue_map will
reset the mapping between cpu and hardware queue base on the hardware
queue count(set->nr_hw_queues). The mapping cannot be reset if it
encounters error in blk_mq_realloc_hw_ctxs, but the fallback flow will
continue using it, then blk_mq_map_swqueue will touch a invalid memory,
because the mapping points to a wrong hctx.
blktest block/030:
null_blk: module loaded
Increasing nr_hw_queues to 8 fails, fallback to 1
==================================================================
BUG: KASAN: null-ptr-deref in blk_mq_map_swqueue+0x2f2/0x830
Read of size 8 at addr 0000000000000128 by task nproc/8541
CPU: 5 PID: 8541 Comm: nproc Not tainted 5.7.0-rc4-dbg+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack+0xa5/0xe6
__kasan_report.cold+0x65/0xbb
kasan_report+0x45/0x60
check_memory_region+0x15e/0x1c0
__kasan_check_read+0x15/0x20
blk_mq_map_swqueue+0x2f2/0x830
__blk_mq_update_nr_hw_queues+0x3df/0x690
blk_mq_update_nr_hw_queues+0x32/0x50
nullb_device_submit_queues_store+0xde/0x160 [null_blk]
configfs_write_file+0x1c4/0x250 [configfs]
__vfs_write+0x4c/0x90
vfs_write+0x14b/0x2d0
ksys_write+0xdd/0x180
__x64_sys_write+0x47/0x50
do_syscall_64+0x6f/0x310
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Tested-by: Bart van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
rename blk_mq_alloc_rq_maps to blk_mq_alloc_map_and_requests,
this function allocs both map and request, make function name align
with funtion.
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
rename __blk_mq_alloc_rq_map to __blk_mq_alloc_map_and_request,
actually it alloc both map and request, make function name
align with function.
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_realloc_tag_set_tags will update set->nr_hw_queues, so
save old set->nr_hw_queues before call this function.
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Call blk_mq_make_request when no ->make_request_fn is set. This is
safe now that blk_alloc_queue always sets up the pointer for make_request
based drivers. This avoids an indirect call in the blk-mq driver I/O
fast path, which is rather expensive due to spectre mitigations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are only two callers of blk_rq_map_sg/__blk_rq_map_sg that set
the dma_pad value in the queue. Move the handling into those callers
instead of burdening the common code, and move the ->extra_len field
from struct request to struct scsi_cmnd.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't burden the common block code with with specifics of the libata DMA
draining mechanism. Instead move most of the code to the scsi midlayer.
That also means the nr_phys_segments adjustments in the blk-mq fast path
can go away entirely, given that SCSI never looks at nr_phys_segments
after mapping the request to a scatterlist.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have:
* blk_mq_run_hw_queue()
* blk_mq_delay_run_hw_queue()
* blk_mq_run_hw_queues()
...but not blk_mq_delay_run_hw_queues(), presumably because nobody
needed it before now. Since we need it for a later patch in this
series, add it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In blk_mq_dispatch_rq_list(), if blk_mq_sched_needs_restart() returns
true and the driver returns BLK_STS_RESOURCE then we'll kick the
queue. However, there's another case where we might need to kick it.
If we were unable to get budget we can be in much the same state as
when the driver returns BLK_STS_RESOURCE, so we should treat it the
same.
It should be noted that even if we add a whole bunch of extra kicking
to the queue in other patches this patch is still important.
Specifically any kicking that happened before we re-spliced leftover
requests into 'hctx->dispatch' wouldn't have found any work, so we
really need to make sure we kick ourselves after we've done the
splicing.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If in blk_mq_dispatch_rq_list() we find no budget, then we break of the
dispatch loop, but the request may keep the driver tag, evaulated
in 'nxt' in the previous loop iteration.
Fix by putting the driver tag for that request.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unburden the drivers from checking if a call to commit_rqs() is valid by
not calling it when there are no requests to commit.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current make_request based drivers use either blk_alloc_queue_node or
blk_alloc_queue to allocate a queue, and then set up the make_request_fn
function pointer and a few parameters using the blk_queue_make_request
helper. Simplify this by passing the make_request pointer to
blk_alloc_queue, and while at it merge the _node variant into the main
helper by always passing a node_id, and remove the superfluous gfp_mask
parameter. A lower-level __blk_alloc_queue is kept for the blk-mq case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows a driver to pass a queuedata member before ->init_hctx is
called. null_blk currently open codes this logic, but I'd rather have
it in the core to ease future maintainance.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out the requeue handling from the dispatch code, this will make
subsequent addition of different requeueing schemes easier.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove 'q' from arguments since it is not used anymore after
commit 7e992f847a ("block: remove non mq parts from the
flush code").
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
q->nr_hw_queues must only be updated once it is known that
blk_mq_realloc_hw_ctxs() has succeeded. Otherwise it can happen that
reallocation fails and that q->nr_hw_queues is larger than the number of
allocated hardware queues. This patch fixes the following crash if
increasing the number of hardware queues fails:
BUG: KASAN: null-ptr-deref in blk_mq_map_swqueue+0x775/0x810
Write of size 8 at addr 0000000000000118 by task check/977
CPU: 3 PID: 977 Comm: check Not tainted 5.6.0-rc1-dbg+ #8
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0xa5/0xe6
__kasan_report.cold+0x65/0x99
kasan_report+0x16/0x20
check_memory_region+0x140/0x1b0
memset+0x28/0x40
blk_mq_map_swqueue+0x775/0x810
blk_mq_update_nr_hw_queues+0x468/0x710
nullb_device_submit_queues_store+0xf7/0x1a0 [null_blk]
configfs_write_file+0x1c4/0x250 [configfs]
__vfs_write+0x4c/0x90
vfs_write+0x145/0x2c0
ksys_write+0xd7/0x180
__x64_sys_write+0x47/0x50
do_syscall_64+0x6f/0x2f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: ac0d6b926e ("block: Reduce the amount of memory required per request queue")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_map_queues() and multiple .map_queues() implementations expect that
set->map[HCTX_TYPE_DEFAULT].nr_queues is set to the number of hardware
queues. Hence set .nr_queues before calling these functions. This patch
fixes the following kernel warning:
WARNING: CPU: 0 PID: 2501 at include/linux/cpumask.h:137
Call Trace:
blk_mq_run_hw_queue+0x19d/0x350 block/blk-mq.c:1508
blk_mq_run_hw_queues+0x112/0x1a0 block/blk-mq.c:1525
blk_mq_requeue_work+0x502/0x780 block/blk-mq.c:775
process_one_work+0x9af/0x1740 kernel/workqueue.c:2269
worker_thread+0x98/0xe40 kernel/workqueue.c:2415
kthread+0x361/0x430 kernel/kthread.c:255
Fixes: ed76e329d7 ("blk-mq: abstract out queue map") # v5.0
Reported-by: syzbot+d44e1b26ce5c3e77458d@syzkaller.appspotmail.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The struct blk_mq_hw_ctx pointer argument in blk_mq_put_tag(),
blk_mq_poll_nsecs(), and blk_mq_poll_hybrid_sleep() is unused, so remove
it.
Overall obj code size shows a minor reduction, before:
text data bss dec hex filename
27306 1312 0 28618 6fca block/blk-mq.o
4303 272 0 4575 11df block/blk-mq-tag.o
after:
27282 1312 0 28594 6fb2 block/blk-mq.o
4311 272 0 4583 11e7 block/blk-mq-tag.o
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
--
This minor patch had been carried as part of the blk-mq shared tags RFC,
I'd rather not carry it anymore as it required rebasing, so now or never..
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For some reason, device may be in one situation which can't handle
FS request, so STS_RESOURCE is always returned and the FS request
will be added to hctx->dispatch. However passthrough request may
be required at that time for fixing the problem. If passthrough
request is added to scheduler queue, there isn't any chance for
blk-mq to dispatch it given we prioritize requests in hctx->dispatch.
Then the FS IO request may never be completed, and IO hang is caused.
So passthrough request has to be added to hctx->dispatch directly
for fixing the IO hang.
Fix this issue by inserting passthrough request into hctx->dispatch
directly together withing adding FS request to the tail of
hctx->dispatch in blk_mq_dispatch_rq_list(). Actually we add FS request
to tail of hctx->dispatch at default, see blk_mq_request_bypass_insert().
Then it becomes consistent with original legacy IO request
path, in which passthrough request is always added to q->queue_head.
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add or improve documentation for function regarding creating and sending
IO requests to the hardware.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of using list_del_init() in a loop, that generates a lot of
unnecessary memory read/writes, iterate from the first request of a
batch and cut out a sublist with list_cut_before().
Apart from removing the list node initialisation part, this is more
register-friendly, and the assembly uses the stack less intensively.
list_empty() at the beginning is done with hope, that the compiler can
optimise out the same check in the following list_splice_init().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Check "!=" in multi-layer comparisons. The same memory usage, fewer
instructions, and 2 from 4 jumps are replaced with SETcc.
Note, that list_sort() doesn't differ 0 and <0.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 97889f9ac2 ("blk-mq: remove synchronize_rcu() from
blk_mq_del_queue_tag_set()"), the return value of blk_mq_run_hw_queue()
is never checked, so make it return void, which very marginally simplifies
the code.
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only usage of the label "done" is when (rq->tag != -1) at the
beginning of the function. Rather than jumping to label, we can just
remove this label and execute the code at the "if". Besides that, the
code that would be executed after the label "done" is the return of the
logical expression (rq->tag != -1) but since we are already inside the
if, we now that this is true. Remove the label and replace the goto with
the proper result of the label.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of allocating an array of size nr_cpu_ids for set->tags, allocate
an array of size set->nr_hw_queues. This patch improves behavior that was
introduced by commit 868f2f0b72 ("blk-mq: dynamic h/w context count").
Reallocating tag sets from inside __blk_mq_update_nr_hw_queues() is safe
because:
- All request queues that share the tag sets are frozen before the tag sets
are reallocated.
- blk_mq_queue_tag_busy_iter() holds q->q_usage_counter while active and
hence is serialized against __blk_mq_update_nr_hw_queues().
Cc: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
