Callchains are automatically initialized by checking on event's
sample_type. For pipe mode we need to put this check into attr event
code.
Moving the callchains setup code into callchain_param_setup function and
calling it from attr event process code.
This enables pipe output having callchains, like:
# perf record -g -e 'raw_syscalls:sys_enter' true | perf script
# perf record -g -e 'raw_syscalls:sys_enter' true | perf report
Committer notes:
We still need the next patch for the above output to work.
Reported-by: Paul Khuong <pvk@pvk.ca>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200507095024.2789147-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In LBR call stack mode, the depth of reconstructed LBR call stack limits
to the number of LBR registers.
For example, on skylake, the depth of reconstructed LBR call stack is
always <= 32.
# To display the perf.data header info, please use
# --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 6K of event 'cycles'
# Event count (approx.): 6487119731
#
# Children Self Command Shared Object Symbol
# ........ ........ ............... ..................
# ................................
99.97% 99.97% tchain_edit tchain_edit [.] f43
|
--99.64%--f11
f12
f13
f14
f15
f16
f17
f18
f19
f20
f21
f22
f23
f24
f25
f26
f27
f28
f29
f30
f31
f32
f33
f34
f35
f36
f37
f38
f39
f40
f41
f42
f43
For a call stack which is deeper than LBR limit, HW will overwrite the
LBR register with oldest branch. Only partial call stacks can be
reconstructed.
However, the overwritten LBRs may still be retrieved from previous
sample. At that moment, HW hasn't overwritten the LBR registers yet.
Perf tools can stitch those overwritten LBRs on current call stacks to
get a more complete call stack.
To determine if LBRs can be stitched, perf tools need to compare current
sample with previous sample.
- They should have identical LBR records (Same from, to and flags
values, and the same physical index of LBR registers).
- The searching starts from the base-of-stack of current sample.
Once perf determines to stitch the previous LBRs, the corresponding LBR
cursor nodes will be copied to 'lists'. The 'lists' is to track the LBR
cursor nodes which are going to be stitched.
When the stitching is over, the nodes will not be freed immediately.
They will be moved to 'free_lists'. Next stitching may reuse the space.
Both 'lists' and 'free_lists' will be freed when all samples are
processed.
Committer notes:
Fix the intel-pt.c initialization of the union with 'struct
branch_flags', that breaks the build with its unnamed union on older gcc
versions.
Uninline thread__free_stitch_list(), as it grew big and started dragging
includes to thread.h, so move it to thread.c where what it needs in
terms of headers are already there.
This fixes the build in several systems such as debian:experimental when
cross building to the MIPS32 architecture, i.e. in the other cases what
was needed was being included by sheer luck.
In file included from builtin-sched.c:11:
util/thread.h: In function 'thread__free_stitch_list':
util/thread.h:169:3: error: implicit declaration of function 'free' [-Werror=implicit-function-declaration]
169 | free(pos);
| ^~~~
util/thread.h:169:3: error: incompatible implicit declaration of built-in function 'free' [-Werror]
util/thread.h:19:1: note: include '<stdlib.h>' or provide a declaration of 'free'
18 | #include "callchain.h"
+++ |+#include <stdlib.h>
19 |
util/thread.h:174:3: error: incompatible implicit declaration of built-in function 'free' [-Werror]
174 | free(pos);
| ^~~~
util/thread.h:174:3: note: include '<stdlib.h>' or provide a declaration of 'free'
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-13-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cursor nodes which generates from sample are eventually added into
callchain. To avoid generating cursor nodes from previous samples again,
the previous cursor nodes are also saved for LBR stitching approach.
Some option, e.g. hide-unresolved, may hide some LBRs. Add a variable
'valid' in struct callchain_cursor_node to indicate this case. The LBR
stitching approach will only append the valid cursor nodes from previous
samples later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-12-kan.liang@linux.intel.com
[ Use zfree() instead of open coded equivalent, and use it when freeing members of structs ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To ease passing around map+symbol, just like done for other parts of the
tree recently.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All we need is a bunch of struct forward declarations and then add
event.h to the only place that was getting it indirectly via
callchain.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-qq2xhyuxcvx5vmxha9otjd8d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf.h and build-id.h are not needed at all in event.h, remove them.
And fixup the fallout of files that were getting needed stuff from this
now pruned include.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-rdm3dgtlrndmmnlc4bafsg3b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow headers just wanting this definition to be able to get it
without all the things in symbol.h, to reduce the include dep tree.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-l32z2qyhs6fe8unf4gk2ead2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That was the only thing that made including map.h in callchain.h a
requiriment, so uninline it and just add a 'struct map' forward
declaration.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7fjz4hvv1bpzqaeriku44fn4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By calculating the removed loops, we can get the iteration count.
But the iteration count could be reported incorrectly, reporting
impossibly high counts.
That's because previous code uses the number of removed LBR entries for
the iteration count. That's not good. Fix this by increasing the
iteration count when a loop is detected.
When matching the chain, the iteration count would be added up, finally we need
to compute the average value when printing out.
For example,
$ perf report --branch-history --stdio --no-children
Before:
---f2 +0
|
|--33.62%--f1 +9 (cycles:1)
| f1 +0
| main +22 (cycles:1)
| main +17
| main +38 (cycles:1)
| main +27
| f1 +26 (cycles:1)
| f1 +24
| f2 +27 (cycles:7)
| f2 +0
| f1 +19 (cycles:1)
| f1 +14
| f2 +27 (cycles:11)
| f2 +0
| f1 +9 (cycles:1 iter:2968 avg_cycles:3)
| f1 +0
| main +22 (cycles:1 iter:2968 avg_cycles:3)
| main +17
| main +38 (cycles:1 iter:2968 avg_cycles:3)
2968 is an impossible high iteration count and avg_cycles is too small.
After:
---f2 +0
|
|--33.62%--f1 +9 (cycles:1)
| f1 +0
| main +22 (cycles:1)
| main +17
| main +38 (cycles:1)
| main +27
| f1 +26 (cycles:1)
| f1 +24
| f2 +27 (cycles:7)
| f2 +0
| f1 +19 (cycles:1)
| f1 +14
| f2 +27 (cycles:11)
| f2 +0
| f1 +9 (cycles:1 iter:1 avg_cycles:23)
| f1 +0
| main +22 (cycles:1 iter:1 avg_cycles:23)
| main +17
| main +38 (cycles:1 iter:1 avg_cycles:23)
avg_cycles:23 is the average cycles of this iteration.
Fixes: c4ee06251d ("perf report: Calculate the average cycles of iterations")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1546582230-17507-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When setting up DWARF callchains on specific events, without using
'record' or 'trace' --call-graph, but instead doing it like:
perf trace -e cycles/call-graph=dwarf/
The unwind__prepare_access() call in thread__insert_map() when we
process PERF_RECORD_MMAP(2) metadata events were not being performed,
precluding us from using per-event DWARF callchains, handling them just
when we asked for all events to be DWARF, using "--call-graph dwarf".
We do it in the PERF_RECORD_MMAP because we have to look at one of the
executable maps to figure out the executable type (64-bit, 32-bit) of
the DSO laid out in that mmap. Also to look at the architecture where
the perf.data file was recorded.
All this probably should be deferred to when we process a sample for
some thread that has callchains, so that we do this processing only for
the threads with samples, not for all of them.
For now, fix using DWARF on specific events.
Before:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.048 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.048/0.048/0.048/0.000 ms
0.000 probe_libc:inet_pton:(7fe9597bb350))
Problem processing probe_libc:inet_pton callchain, skipping...
#
After:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.060 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.060/0.060/0.060/0.000 ms
0.000 probe_libc:inet_pton:(7fd4aa930350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa804e51af3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa804e51b379] (/usr/bin/ping)
#
# perf trace --call-graph=dwarf --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.057 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.057/0.057/0.057/0.000 ms
0.000 probe_libc:inet_pton:(7f9363b9e350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffa9e8a14e0f3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffa9e8a14e1379] (/usr/bin/ping)
#
# perf trace --call-graph=fp --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.077 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.077/0.077/0.077/0.000 ms
0.000 probe_libc:inet_pton:(7f4947e1c350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa716d88ef3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa716d88f379] (/usr/bin/ping)
#
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=fp/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.078 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.078/0.078/0.078/0.000 ms
0.000 probe_libc:inet_pton:(7fa157696350))
__GI___inet_pton (/usr/lib64/libc-2.26.so)
getaddrinfo (/usr/lib64/libc-2.26.so)
[0xffffa9ba39c74f40] (/usr/bin/ping)
#
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/r/20180116182650.GE16107@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is mostly a preparation to enable the creation of full callchain
nodes for inline frames. Such frames will reference the IP of the
non-inlined frame, but hold the symbol and srcline for an inlined
location. As such, we won't be able to query the srcline on-demand based
on the IP alone. Instead, we will leverage the functionality provided by
this patch here, and store the srcline for the inlined nodes in the new
srcline member of callchain_cursor_node.
Note that this patch on its own leaks the srcline, as there is no
free_callchain_cursor_node or similar. A future patch will add caching
of the srcline and handle deletion properly.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-3-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch history code has a loop detection function. With this, we can
get the number of iterations by calculating the removed loops.
While it would be nice for knowing the average cycles of iterations.
This patch adds up the cycles in branch entries of removed loops and
save the result to the next branch entry (e.g. branch entry A).
Finally it will display the iteration number and average cycles at the
"from" of branch entry A.
For example:
perf record -g -j any,save_type ./div
perf report --branch-history --no-children --stdio
--22.63%--main div.c:42 (RET CROSS_2M)
compute_flag div.c:28 (cycles:2 iter:173115 avg_cycles:2)
|
--10.73%--compute_flag div.c:27 (RET CROSS_2M)
rand rand.c:28 (cycles:1)
rand rand.c:28 (RET CROSS_2M)
__random random.c:298 (cycles:1)
__random random.c:297 (COND_BWD CROSS_2M)
__random random.c:295 (cycles:1)
__random random.c:295 (COND_BWD CROSS_2M)
__random random.c:295 (cycles:1)
__random random.c:295 (RET CROSS_2M)
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1502111115-18305-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show branch type in callchain entry. The branch type is printed
with other LBR information (such as cycles/abort/...).
For example:
perf record -g -j any,save_type
perf report --branch-history --stdio --no-children
38.50% div.c:45 [.] main div
|
---main div.c:42 (RET CROSS_2M cycles:2)
compute_flag div.c:28 (cycles:2)
compute_flag div.c:27 (RET CROSS_2M cycles:1)
rand rand.c:28 (cycles:1)
rand rand.c:28 (RET CROSS_2M cycles:1)
__random random.c:298 (cycles:1)
__random random.c:297 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (RET CROSS_2M cycles:9)
Change log
v6: Remove the branch_type_str() since it's moved to branch.c.
v5: Rewrite the branch info print code in util/callchain.c.
v4: Comparing to previous version, the major changes are:
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500379995-6449-8-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Often it is interesting to know how costly a given source line is in
total. Previously, one had to build these sums manually based on all
addresses that pointed to the same source line. This patch introduces
srcline as a sort key, which will do the aggregation for us.
Paired with the recent addition of showing inline frames, this makes
perf report much more useful for many C++ work loads.
The following shows the new feature in action. First, let's show the
status quo output when we sort by address. The result contains many hist
entries that generate the same output:
~~~~~~~~~~~~~~~~
$ perf report --stdio --inline -g address
# Children Self Command Shared Object Symbol
# ........ ........ ............ ................... .........................................
#
99.89% 35.34% cpp-inlining cpp-inlining [.] main
|
|--64.55%--main complex:655
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/complex:664 (inline)
| |
| |--60.31%--hypot +20
| | |
| | |--8.52%--__hypot_finite +273
| | |
| | |--7.32%--__hypot_finite +411
...
--35.34%--_start +4194346
__libc_start_main +241
|
|--6.65%--main random.tcc:3326
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
| /usr/include/c++/6.3.1/bits/random.h:185 (inline)
|
|--2.70%--main random.tcc:3326
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
| /usr/include/c++/6.3.1/bits/random.h:185 (inline)
|
|--1.69%--main random.tcc:3326
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
| /usr/include/c++/6.3.1/bits/random.h:185 (inline)
...
~~~~~~~~~~~~~~~~
With this patch and `-g srcline` we instead get the following output:
~~~~~~~~~~~~~~~~
$ perf report --stdio --inline -g srcline
# Children Self Command Shared Object Symbol
# ........ ........ ............ ................... .........................................
#
99.89% 35.34% cpp-inlining cpp-inlining [.] main
|
|--64.55%--main complex:655
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/complex:664 (inline)
| |
| |--64.02%--hypot
| | |
| | --59.81%--__hypot_finite
| |
| --0.53%--cabs
|
--35.34%--_start
__libc_start_main
|
|--12.48%--main random.tcc:3326
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
| /usr/include/c++/6.3.1/bits/random.h:185 (inline)
...
~~~~~~~~~~~~~~~~
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170318214928.9047-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If dso__load_kcore frees all of the existing maps, but one has already
been attached to a callchain cursor node, then we can get a SIGSEGV in
any function that happens to try to use this invalid cursor. Use the
existing map refcount mechanism to forestall cleanup of a map until the
cursor iterates past the node.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@kernel.org
Fixes: 84c2cafa28 ("perf tools: Reference count struct map")
Link: http://lkml.kernel.org/r/20170106062331.GB2707@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callchain_cursor__copy() function is to save current callchain
captured by a cursor. It'll be used to keep callchains when switching
to idle task for each cpu.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161206034010.6499-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create some branch counters in per callchain list entry. Each counter
is for a branch flag. For example, predicted_count counts all the
*predicted* branches. The counters get updated by processing the
callchain cursor nodes.
It also provides functions to retrieve or print the values of counters
in callchain list.
Besides the counting for branch flags, it also counts and returns the
average number of iterations.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1477876794-30749-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the branch ip has been added to call stack for easier browsing,
this patch adds more branch information. For example, add a flag to
indicate if this ip is a branch, and also add with the branch flag.
Then we can know if the cursor node represents a branch and know what
the branch flag it has.
The branch history code has a loop detection pass that removes loops. It
would be nice for knowing how many loops were removed then in next
steps, we can compute out the average number of iterations.
For example:
Before remove_loops(),
entry0: from = 0x100, to = 0x200
entry1: from = 0x300, to = 0x250
entry2: from = 0x300, to = 0x250
entry3: from = 0x300, to = 0x250
entry4: from = 0x700, to = 0x800
After remove_loops()
entry0: from = 0x100, to = 0x200
entry1: from = 0x300, to = 0x250
entry2: from = 0x700, to = 0x800
The original entry2 and entry3 are removed. So the number of iterations
(from = 0x300, to = 0x250) is equal to removed number + 1 (2 + 1).
iterations = removed number + 1;
average iteractions = Sum(iteractions) / number of samples
This formula ignores other cases, for example, iterations cross multiple
buffers and one buffer contains 2+ loops. Because in practice, it's good
enough.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/n/1477876794-30749-2-git-send-email-yao.jin@linux.intel.com
[ Renamed 'iter' to 'nr_loop_iter' for clarity ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since 841e3558b2 ("perf callchain: Recording 'dwarf' callchains do not
need DWARF unwinding support"), --call-graph dwarf is allowed in 'perf
record' even without unwind support. A couple of other places don't
reflect this yet though: the help text should list dwarf as a valid
record mode and the dump_size config should be respected too.
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Cc: He Kuang <hekuang@huawei.com>
Fixes: 841e3558b2 ("perf callchain: Recording 'dwarf' callchains do not need DWARF unwinding support")
Link: http://lkml.kernel.org/r/1470837148-7642-1-git-send-email-rabin.vincent@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User's values from .perfconfig could overload the default callchain
setup and cause this test to fail. Making sure the test is using
default callchain_param values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467634583-29147-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To be able to call it outside option parsing, like when setting a
default --call-graph parameter in 'perf trace' when just --min-stack is
used.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xay69plylwibpb3l4isrpl1k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The recent perf_evsel__fprintf_callchain() move to evsel.c added several
new symbol requirements to the python binding, for instance:
# perf test -v python
16: Try 'import perf' in python, checking link problems :
--- start ---
test child forked, pid 18030
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /tmp/build/perf/python/perf.so: undefined symbol:
callchain_cursor
test child finished with -1
---- end ----
Try 'import perf' in python, checking link problems: FAILED!
#
This would require linking against callchain.c to access to the global
callchain_cursor variables.
Since lots of functions already receive as a parameter a
callchain_cursor struct pointer, make that be the case for some more
function so that we can start phasing out usage of yet another global
variable.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-djko3097eyg2rn66v2qcqfvn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-w246stf7ponfamclsai6b9zo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It missed to decay periods in callchains when decaying hist entries.
This resulted in more than 100 percent overhead in callchains in the
fractal style output.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1451963160-17196-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The flat callchain mode is to print all chains in a single, simple
hierarchy so make it easy to see.
Currently perf report --tui doesn't show flat callchains properly. With
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes. To do that, add parent_val list to
struct callchain_node and show them along with the (normal) val list.
For example, consider following callchains with '-g graph'.
$ perf report -g graph
- 39.93% swapper [kernel.vmlinux] [k] intel_idle
intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
- cpu_startup_entry
28.63% start_secondary
- 11.30% rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
Before:
$ perf report -g flat
- 39.93% swapper [kernel.vmlinux] [k] intel_idle
28.63% start_secondary
- 11.30% rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
After:
$ perf report -g flat
- 39.93% swapper [kernel.vmlinux] [k] intel_idle
- 28.63% intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
start_secondary
- 11.30% intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
start_kernel
x86_64_start_reservations
x86_64_start_kernel
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now -g/--call-graph option supports how to display callchain values.
Possible values are 'percent', 'period' and 'count'. The percent is
same as before and it's the default behavior. The period displays the
raw period value rather than the percentage. The count displays the
number of occurrences.
$ perf report --no-children --stdio -g percent
...
39.93% swapper [kernel.vmlinux] [k] intel_idel
|
---intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--28.63%-- start_secondary
|
--11.30%-- rest_init
$ perf report --no-children --show-total-period --stdio -g period
...
39.93% 13018705 swapper [kernel.vmlinux] [k] intel_idel
|
---intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--9334403-- start_secondary
|
--3684302-- rest_init
$ perf report --no-children --show-nr-samples --stdio -g count
...
39.93% 80 swapper [kernel.vmlinux] [k] intel_idel
|
---intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--57-- start_secondary
|
--23-- rest_init
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's to track the count of occurrences of the callchains.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation to support for printing other type of callchain
value like count or period.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-4-git-send-email-namhyung@kernel.org
[ renamed new _sprintf_ operation to _scnprintf_ ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add new call chain option (-g) 'folded' to print callchains in a line.
The callchains are separated by semicolons, and preceded by (absolute)
percent values and a space.
For example, the following 20 lines can be printed in 3 lines with the
folded output mode:
$ perf report -g flat --no-children | grep -v ^# | head -20
60.48% swapper [kernel.vmlinux] [k] intel_idle
54.60%
intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
start_secondary
5.88%
intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
$ perf report -g folded --no-children | grep -v ^# | head -3
60.48% swapper [kernel.vmlinux] [k] intel_idle
54.60% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary
5.88% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
This mode is supported only for --stdio now and intended to be used by
some scripts like in FlameGraphs[1]. Support for other UI might be
added later.
[1] http://www.brendangregg.com/FlameGraphs/cpuflamegraphs.html
Requested-and-Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --call-graph option is complex so we should provide better guide for
users. Also change help message to be consistent with config option
names. Now perf top will show help like below:
$ perf top --call-graph
Error: option `call-graph' requires a value
Usage: perf top [<options>]
--call-graph <record_mode[,record_size],print_type,threshold[,print_limit],order,sort_key[,branch]>
setup and enables call-graph (stack chain/backtrace):
record_mode: call graph recording mode (fp|dwarf|lbr)
record_size: if record_mode is 'dwarf', max size of stack recording (<bytes>)
default: 8192 (bytes)
print_type: call graph printing style (graph|flat|fractal|none)
threshold: minimum call graph inclusion threshold (<percent>)
print_limit: maximum number of call graph entry (<number>)
order: call graph order (caller|callee)
sort_key: call graph sort key (function|address)
branch: include last branch info to call graph (branch)
Default: fp,graph,0.5,caller,function
Requested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445524112-5201-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The caller callchain order is useful with --children option since it can
show 'overview' style output, but other commands which don't use
--children feature like 'perf script' or even 'perf report/top' without
--children are better to keep callee order.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445499946-29817-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently 'perf top --call-graph' option is same as 'perf record'. But
'perf top' also need to receive display options in 'perf report'. To do
that, change parse_callchain_report_opt() to allow record options too.
Now perf top can receive display options like below:
$ perf top --call-graph
Error: option `call-graph' requires a value
Usage: perf top [<options>]
--call-graph
<mode[,dump_size],output_type,min_percent[,print_limit],call_order[,branch]>
setup and enables call-graph (stack chain/backtrace)
recording: fp dwarf lbr, output_type (graph, flat,
fractal, or none), min percent threshold, optional
print limit, callchain order, key (function or
address), add branches
$ perf top --call-graph callee,graph,fp
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445495330-25416-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These messages will be used by 'perf top' in the next patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445495330-25416-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move callchain option parse related code to util.c, to avoid dragging
more object files into the python binding.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438890294-33409-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass global callchain_param into parse_callchain_record_opt and
perf_evsel__config_callgraph as parameter. So we can reuse these
functions to parse/config local param for callchain.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438677022-34296-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The has_children and unfolded fields don't belong to the struct
map_symbol since they're used by the TUI only. Move those fields out of
map_symbol since the struct is also used by other places.
This will also help to compact the sizeof struct hist_entry.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429687101-4360-11-git-send-email-namhyung@kernel.org
Link: http://lkml.kernel.org/r/1430837746-5439-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, there are two call chain recording options, fp and dwarf.
Haswell has a new feature that utilizes the existing LBR facility to
record call chains. Kernel side LBR support code provides this as a
third option to record call chains. This patch enables the lbr call
stack support on the tooling side.
LBR call stack has some limitations:
- It reuses current LBR facility, so LBR call stack and branch record
can not be enabled at the same time.
- It is only available for user-space callchains.
However, it also offers some advantages:
- LBR call stack can work on user apps which don't have frame-pointers
or dwarf debug info compiled. It is a good alternative when nothing
else works.
Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Jacob Shin <jacob.w.shin@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1420482185-29830-2-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Markus reported that "perf top -g" can leak ~300MB per second on his
machine. This is partly because it missed to free callchains when hist
entries are deleted. Fix it.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20141230053813.GD6081@sejong
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently branch stacks can be only shown as edge histograms for
individual branches. I never found this display particularly useful.
This implements an alternative mode that creates histograms over
complete branch traces, instead of individual branches, similar to how
normal callgraphs are handled. This is done by putting it in front of
the normal callgraph and then using the normal callgraph histogram
infrastructure to unify them.
This way in complex functions we can understand the control flow that
lead to a particular sample, and may even see some control flow in the
caller for short functions.
Example (simplified, of course for such simple code this is usually not
needed), please run this after the whole patchkit is in, as at this
point in the patch order there is no --branch-history, that will be
added in a patch after this one:
tcall.c:
volatile a = 10000, b = 100000, c;
__attribute__((noinline)) f2()
{
c = a / b;
}
__attribute__((noinline)) f1()
{
f2();
f2();
}
main()
{
int i;
for (i = 0; i < 1000000; i++)
f1();
}
% perf record -b -g ./tsrc/tcall
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.044 MB perf.data (~1923 samples) ]
% perf report --no-children --branch-history
...
54.91% tcall.c:6 [.] f2 tcall
|
|--65.53%-- f2 tcall.c:5
| |
| |--70.83%-- f1 tcall.c:11
| | f1 tcall.c:10
| | main tcall.c:18
| | main tcall.c:18
| | main tcall.c:17
| | main tcall.c:17
| | f1 tcall.c:13
| | f1 tcall.c:13
| | f2 tcall.c:7
| | f2 tcall.c:5
| | f1 tcall.c:12
| | f1 tcall.c:12
| | f2 tcall.c:7
| | f2 tcall.c:5
| | f1 tcall.c:11
| |
| --29.17%-- f1 tcall.c:12
| f1 tcall.c:12
| f2 tcall.c:7
| f2 tcall.c:5
| f1 tcall.c:11
| f1 tcall.c:10
| main tcall.c:18
| main tcall.c:18
| main tcall.c:17
| main tcall.c:17
| f1 tcall.c:13
| f1 tcall.c:13
| f2 tcall.c:7
| f2 tcall.c:5
| f1 tcall.c:12
The default output is unchanged.
This is only implemented in perf report, no change to record or anywhere
else.
This adds the basic code to report:
- add a new "branch" option to the -g option parser to enable this mode
- when the flag is set include the LBR into the callstack in machine.c.
The rest of the history code is unchanged and doesn't know the
difference between LBR entry and normal call entry.
- detect overlaps with the callchain
- remove small loop duplicates in the LBR
Current limitations:
- The LBR flags (mispredict etc.) are not shown in the history
and LBR entries have no special marker.
- It would be nice if annotate marked the LBR entries somehow
(e.g. with arrows)
v2: Various fixes.
v3: Merge further patches into this one. Fix white space.
v4: Improve manpage. Address review feedback.
v5: Rename functions. Better error message without -g. Fix crash without
-b.
v6: Rebase
v7: Rebase. Use NO_ENTRY in memset.
v8: Port to latest tip. Move add_callchain_ip to separate
patch. Skip initial entries in callchain. Minor cleanups.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1415844328-4884-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For lbr-as-callgraph we need to see the line number in the history,
because many LBR entries can be in a single function, and just
showing the same function name many times is not useful.
When the history code is configured to sort by address, also try to
resolve the address to a file:srcline and display this in the browser.
If that doesn't work still display the address.
This can be also useful without LBRs for understanding which call in a large
function (or in which inlined function) called something else.
Contains fixes from Namhyung Kim
v2: Refactor code into common function
v3: Fix GTK build
v4: Rebase
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1415844328-4884-7-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refactor the duplicated code to resolve the symbol name or
the address of a symbol into a single function.
Used in next patch to add common functionality.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1415844328-4884-6-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So stop passing both machine and thread to several thread methods,
reducing function signature length.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ckcy19dcp1jfkmdihdjcqdn1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was lost in hist.h, move it to where it belongs, callchain.h, as
there are places that gets hist.h by means of evsel.h, and since evsel.h
is being untangled from hist.h...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0rg7ji1jnbm6q6gj35j37jby@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
