Add a generic trace_array_puts() that can be used to "trace_puts()" into
an allocated trace_array instance. This is just another variant of
trace_array_printk().
Link: https://lkml.kernel.org/r/20230207173026.584717290@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add the format of:
trace_instance=foo,sched:sched_switch,irq_handler_entry,initcall
That will create the "foo" instance and enable the sched_switch event
(here were the "sched" system is explicitly specified), the
irq_handler_entry event, and all events under the system initcall.
Link: https://lkml.kernel.org/r/20230207173026.386114535@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add kernel command line to add tracing instances. This only creates
instances at boot but still does not enable any events to them. Later
changes will extend this command line to add enabling of events, filters,
and triggers. As well as possibly redirecting trace_printk()!
Link: https://lkml.kernel.org/r/20230207173026.186210158@goodmis.org
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The test to check if the field is a stack is to be done if it is not a
string. But the code had:
} if (event->fields[i]->is_stack) {
and not
} else if (event->fields[i]->is_stack) {
which would cause it to always be tested. Worse yet, this also included an
"else" statement that was only to be called if the field was not a string
and a stack, but this code allows it to be called if it was a string (and
not a stack).
Also fixed some whitespace issues.
Link: https://lore.kernel.org/all/202301302110.mEtNwkBD-lkp@intel.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230131095237.63e3ca8d@gandalf.local.home
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 00cf3d672a ("tracing: Allow synthetic events to pass around stacktraces")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
smatch reports this representative issue
samples/ftrace/ftrace-ops.c:15:14: warning: symbol 'nr_function_calls' was not declared. Should it be static?
The nr_functions_calls and several other global variables are only
used in ftrace-ops.c, so they should be static.
Remove the instances of initializing static int to 0.
Link: https://lore.kernel.org/linux-trace-kernel/20230130193708.1378108-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Calculating the average period requires a 64-bit division that leads
to a link failure on 32-bit architectures:
x86_64-linux-ld: samples/ftrace/ftrace-ops.o: in function `ftrace_ops_sample_init':
ftrace-ops.c:(.init.text+0x23b): undefined reference to `__udivdi3'
Use the div_u64() helper to do this instead. Since this is an init function that
is not called frequently, the runtime overhead is going to be acceptable.
Link: https://lore.kernel.org/linux-trace-kernel/20230130130246.247537-1-arnd@kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: b56c68f705 ("ftrace: Add sample with custom ops")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When other architectures without the nospec functionality write their
direct-call functions of samples/ftrace/*.c, the including of
asm/nospec-branch.h must be taken care to fix the no header file found
error in building process.
This commit (ee3e2469b3 "x86/ftrace: Make it call depth tracking aware")
file-globally includes asm/nospec-branch.h providing CALL_DEPTH_ACCOUNT
for only x86 direct-call functions.
It seems better to move the including to `#ifdef CONFIG_X86_64`.
Link: https://lore.kernel.org/linux-trace-kernel/20230130085954.647845-1-suagrfillet@gmail.com
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
there is one dwc3 trace event declare as below,
DECLARE_EVENT_CLASS(dwc3_log_event,
TP_PROTO(u32 event, struct dwc3 *dwc),
TP_ARGS(event, dwc),
TP_STRUCT__entry(
__field(u32, event)
__field(u32, ep0state)
__dynamic_array(char, str, DWC3_MSG_MAX)
),
TP_fast_assign(
__entry->event = event;
__entry->ep0state = dwc->ep0state;
),
TP_printk("event (%08x): %s", __entry->event,
dwc3_decode_event(__get_str(str), DWC3_MSG_MAX,
__entry->event, __entry->ep0state))
);
the problem is when trace function called, it will allocate up to
DWC3_MSG_MAX bytes from trace event buffer, but never fill the buffer
during fast assignment, it only fill the buffer when output function are
called, so this means if output function are not called, the buffer will
never used.
add __get_buf(len) which acquiree buffer from iter->tmp_seq when trace
output function called, it allow user write string to acquired buffer.
the mentioned dwc3 trace event will changed as below,
DECLARE_EVENT_CLASS(dwc3_log_event,
TP_PROTO(u32 event, struct dwc3 *dwc),
TP_ARGS(event, dwc),
TP_STRUCT__entry(
__field(u32, event)
__field(u32, ep0state)
),
TP_fast_assign(
__entry->event = event;
__entry->ep0state = dwc->ep0state;
),
TP_printk("event (%08x): %s", __entry->event,
dwc3_decode_event(__get_buf(DWC3_MSG_MAX), DWC3_MSG_MAX,
__entry->event, __entry->ep0state))
);.
Link: https://lore.kernel.org/linux-trace-kernel/1675065249-23368-1-git-send-email-quic_linyyuan@quicinc.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Most shell command snippets (echo/cat) and their output are already in
literal code blocks. However a few still isn't wrapped, in which the
htmldocs output is ugly.
Wrap the remaining unwrapped snippets, while also fix recent kernel test
robot warnings.
Link: https://lore.kernel.org/linux-trace-kernel/20230129031402.47420-1-bagasdotme@gmail.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/linux-doc/202301290253.LU5yIxcJ-lkp@intel.com/
Fixes: 88238513bb ("tracing/histogram: Document variable stacktrace")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The bpf events are created by the same macro magic as tracefs trace
events are. But to hook into bpf, it has its own code. It duplicates many
of the same macros as the tracefs macros and this is an issue because it
misses bug fixes as well as any new enhancements that come with the other
trace macros.
As the trace macros have been put into their own staging files, have bpf
take advantage of this and use the tracefs stage 6 macros that the "fast
ssign" portion of the trace event macro uses.
Link: https://lkml.kernel.org/r/20230124202515.873075730@goodmis.org
Link: https://lore.kernel.org/lkml/1671181385-5719-1-git-send-email-quic_linyyuan@quicinc.com/
Cc: bpf@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Reported-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The perf events are created by the same macro magic as tracefs trace
events are. But to hook into perf, it has its own code. It duplicates many
of the same macros as the tracefs macros and this is an issue because it
misses bug fixes as well as any new enhancements that come with the other
trace macros.
As the trace macros have been put into their own staging files, have perf
take advantage of this and use the tracefs stage 6 macros that the "fast
assign" portion of the trace event macro uses.
Link: https://lkml.kernel.org/r/20230124202515.716458410@goodmis.org
Link: https://lore.kernel.org/lkml/1671181385-5719-1-git-send-email-quic_linyyuan@quicinc.com/
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Update the selftests to include a test of passing a stacktrace between the
events of a synthetic event.
Link: https://lkml.kernel.org/r/20230117152236.475439286@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Ching-lin Yu <chinglinyu@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a little documentation (and a useful example) of how a stacktrace can
be used within a histogram variable and synthetic event.
Link: https://lkml.kernel.org/r/20230117152236.320181354@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Ching-lin Yu <chinglinyu@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Allow a stacktrace from one event to be displayed by the end event of a
synthetic event. This is very useful when looking for the longest latency
of a sleep or something blocked on I/O.
# cd /sys/kernel/tracing/
# echo 's:block_lat pid_t pid; u64 delta; unsigned long[] stack;' > dynamic_events
# echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=stacktrace if prev_state == 1||prev_state == 2' > events/sched/sched_switch/trigger
# echo 'hist:keys=prev_pid:delta=common_timestamp.usecs-$ts,s=$st:onmax($delta).trace(block_lat,prev_pid,$delta,$s)' >> events/sched/sched_switch/trigger
The above creates a "block_lat" synthetic event that take the stacktrace of
when a task schedules out in either the interruptible or uninterruptible
states, and on a new per process max $delta (the time it was scheduled
out), will print the process id and the stacktrace.
# echo 1 > events/synthetic/block_lat/enable
# cat trace
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
kworker/u16:0-767 [006] d..4. 560.645045: block_lat: pid=767 delta=66 stack=STACK:
=> __schedule
=> schedule
=> pipe_read
=> vfs_read
=> ksys_read
=> do_syscall_64
=> 0x966000aa
<idle>-0 [003] d..4. 561.132117: block_lat: pid=0 delta=413787 stack=STACK:
=> __schedule
=> schedule
=> schedule_hrtimeout_range_clock
=> do_sys_poll
=> __x64_sys_poll
=> do_syscall_64
=> 0x966000aa
<...>-153 [006] d..4. 562.068407: block_lat: pid=153 delta=54 stack=STACK:
=> __schedule
=> schedule
=> io_schedule
=> rq_qos_wait
=> wbt_wait
=> __rq_qos_throttle
=> blk_mq_submit_bio
=> submit_bio_noacct_nocheck
=> ext4_bio_write_page
=> mpage_submit_page
=> mpage_process_page_bufs
=> mpage_prepare_extent_to_map
=> ext4_do_writepages
=> ext4_writepages
=> do_writepages
=> __writeback_single_inode
Link: https://lkml.kernel.org/r/20230117152236.010941267@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Ching-lin Yu <chinglinyu@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Allow to save stacktraces into a histogram variable. This will be used by
synthetic events to allow a stacktrace from one event to be passed and
displayed by another event.
The special keyword "stacktrace" is to be used to trigger a stack
trace for the event that the histogram trigger is attached to.
echo 'hist:keys=pid:st=stacktrace" > events/sched/sched_waking/trigger
Currently nothing can get access to the "$st" variable above that contains
the stack trace, but that will soon change.
Link: https://lkml.kernel.org/r/20230117152235.856323729@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Ching-lin Yu <chinglinyu@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When tracing a dynamic string field for a synthetic event, the offset
calculation for where to write the next event can use struct_size() to
find what the current size of the structure is.
This simplifies the code and makes it less error prone.
Link: https://lkml.kernel.org/r/20230117152235.698632147@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Ching-lin Yu <chinglinyu@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In a previous commit 7433632c9f, buffer, buffer->buffers and
buffer->buffers[cpu] in ring_buffer_wake_waiters() can be NULL,
and thus the related checks are added.
However, in the same call stack, these variables are also used in
ring_buffer_free_read_page():
tracing_buffers_release()
ring_buffer_wake_waiters(iter->array_buffer->buffer)
cpu_buffer = buffer->buffers[cpu] -> Add checks by previous commit
ring_buffer_free_read_page(iter->array_buffer->buffer)
cpu_buffer = buffer->buffers[cpu] -> No check
Thus, to avod possible null-pointer derefernces, the related checks
should be added.
These results are reported by a static tool designed by myself.
Link: https://lkml.kernel.org/r/20230113125501.760324-1-baijiaju1990@gmail.com
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
With the new filter logic of passing in the name of a function to match an
instruction pointer (or the address of the function), add a test to make
sure that it is functional.
This is also the first test to test plain filtering. The filtering has
been tested via the trigger logic, which uses the same code, but there was
nothing to test just the event filter, so this test is the first to add
such a case.
Link: https://lkml.kernel.org/r/20221219183214.075559302@goodmis.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: linux-kselftest@vger.kernel.org
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There's been several times where an event records a function address in
its field and I needed to filter on that address for a specific function
name. It required looking up the function in kallsyms, finding its size,
and doing a compare of "field >= function_start && field < function_end".
But this would change from boot to boot and is unreliable in scripts.
Also, it is useful to have this at boot up, where the addresses will not
be known. For example, on the boot command line:
trace_trigger="initcall_finish.traceoff if func.function == acpi_init"
To implement this, add a ".function" prefix, that will check that the
field is of size long, and the only operations allowed (so far) are "=="
and "!=".
Link: https://lkml.kernel.org/r/20221219183213.916833763@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The pointer ptr is being initialized with a value that is never read,
it is being updated later on a call to strim. Remove the extraneous
initialization.
Link: https://lkml.kernel.org/r/20230116161612.77192-1-colin.i.king@gmail.com
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There's no entry in MAINTAINERS for samples/ftrace. Add one so that the
FTRACE maintainers are kept in the loop.
Link: https://lkml.kernel.org/r/20230103124912.2948963-2-mark.rutland@arm.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Use the 'struct' keyword for a struct's kernel-doc notation and
use the correct function parameter name to eliminate kernel-doc
warnings:
kernel/trace/trace_events_filter.c:136: warning: cannot understand function prototype: 'struct prog_entry '
kerne/trace/trace_events_filter.c:155: warning: Excess function parameter 'when_to_branch' description in 'update_preds'
Also correct some trivial punctuation problems.
Link: https://lkml.kernel.org/r/20230108021238.16398-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Function 'create_hist_field' is called recursively at
trace_events_hist.c:1954 and can return NULL-value that's why we have
to check it to avoid null pointer dereference.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lkml.kernel.org/r/20230111120409.4111-1-n.petrova@fintech.ru
Cc: stable@vger.kernel.org
Fixes: 30350d65ac ("tracing: Add variable support to hist triggers")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
list_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence false lockdep
warning when CONFIG_PROVE_RCU_LIST is enabled.
Execute as follow:
[tracing]# echo osnoise > current_tracer
[tracing]# echo 1 > tracing_on
[tracing]# echo 0 > tracing_on
The trace_types_lock is held when osnoise_tracer_stop() or
timerlat_tracer_stop() are called in the non-RCU read side section.
So, pass lockdep_is_held(&trace_types_lock) to silence false lockdep
warning.
Link: https://lkml.kernel.org/r/20221227023036.784337-1-nashuiliang@gmail.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: dae181349f ("tracing/osnoise: Support a list of trace_array *tr")
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The instructions for the ftrace-bisect.sh script, which is used to find
what function is being traced that is causing a kernel crash, and possibly
a triple fault reboot, uses the old method. In 5.1, a new feature was
added that let the user write in the index into available_filter_functions
that maps to the function a user wants to set in set_ftrace_filter (or
set_ftrace_notrace). This takes O(1) to set, as suppose to writing a
function name, which takes O(n) (where n is the number of functions in
available_filter_functions).
The ftrace-bisect.sh requires setting half of the functions in
available_filter_functions, which is O(n^2) using the name method to enable
and can take several minutes to complete. The number method is O(n) which
takes less than a second to complete. Using the number method for any
kernel 5.1 and after is the proper way to do the bisect.
Update the usage to reflect the new change, as well as using the
/sys/kernel/tracing path instead of the obsolete debugfs path.
Link: https://lkml.kernel.org/r/20230123112252.022003dd@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Fixes: f79b3f3385 ("ftrace: Allow enabling of filters via index of available_filter_functions")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently trace_printk() can be used as soon as early_trace_init() is
called from start_kernel(). But if a crash happens, and
"ftrace_dump_on_oops" is set on the kernel command line, all you get will
be:
[ 0.456075] <idle>-0 0dN.2. 347519us : Unknown type 6
[ 0.456075] <idle>-0 0dN.2. 353141us : Unknown type 6
[ 0.456075] <idle>-0 0dN.2. 358684us : Unknown type 6
This is because the trace_printk() event (type 6) hasn't been registered
yet. That gets done via an early_initcall(), which may be early, but not
early enough.
Instead of registering the trace_printk() event (and other ftrace events,
which are not trace events) via an early_initcall(), have them registered at
the same time that trace_printk() can be used. This way, if there is a
crash before early_initcall(), then the trace_printk()s will actually be
useful.
Link: https://lkml.kernel.org/r/20230104161412.019f6c55@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: e725c731e3 ("tracing: Split tracing initialization into two for early initialization")
Reported-by: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Setting filters on an ftrace ops results in some memory being allocated
for the filter hashes, which must be freed before the ops can be freed.
This can be done by removing every individual element of the hash by
calling ftrace_set_filter_ip() or ftrace_set_filter_ips() with `remove`
set, but this is somewhat error prone as it's easy to forget to remove
an element.
Make it easier to clean this up by exporting ftrace_free_filter(), which
can be used to clean up all of the filter hashes after an ftrace_ops has
been unregistered.
Using this, fix the ftrace-direct* samples to free hashes prior to being
unloaded. All other code either removes individual filters explicitly or
is built-in and already calls ftrace_free_filter().
Link: https://lkml.kernel.org/r/20230103124912.2948963-3-mark.rutland@arm.com
Cc: stable@vger.kernel.org
Cc: Florent Revest <revest@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: e1067a07cf ("ftrace/samples: Add module to test multi direct modify interface")
Fixes: 5fae941b9a ("ftrace/samples: Add multi direct interface test module")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=1c2L
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux
Pull another io_uring fix from Jens Axboe:
"Just a single fix for a regression that happened in this release due
to a poll change. Normally I would've just deferred it to next week,
but since the original fix got picked up by stable, I think it's
better to just send this one off separately.
The issue is around the poll race fix, and how it mistakenly also got
applied to multishot polling. Those don't need the race fix, and we
should not be doing any reissues for that case. Exhaustive test cases
were written and committed to the liburing regression suite for the
reported issue, and additions for similar issues"
* tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux:
io_uring/poll: don't reissue in case of poll race on multishot request
Here are some small char/misc and other subsystem driver fixes for
6.2-rc5 to resolve a few reported issues. They include:
- long time pending fastrpc fixes (should have gone into 6.1, my
fault.)
- mei driver/bus fixes and new device ids
- interconnect driver fixes for reported problems
- vmci bugfix
- w1 driver bugfixes for reported problems
Almost all of these have been in linux-next with no reported problems,
the rest have all passed 0-day bot testing in my tree and on the mailing
lists where they have sat too long due to me taking a long time to catch
up on my pending patch queue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY8wBNA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk30QCgrdhgSnL4s2o/y0L/nkB4ubg9spkAoJtmRHe4
EYj/RIm7VYef65aIElVT
=Cj+i
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc and other subsystem driver fixes for
6.2-rc5 to resolve a few reported issues. They include:
- long time pending fastrpc fixes (should have gone into 6.1, my
fault)
- mei driver/bus fixes and new device ids
- interconnect driver fixes for reported problems
- vmci bugfix
- w1 driver bugfixes for reported problems
Almost all of these have been in linux-next with no reported problems,
the rest have all passed 0-day bot testing in my tree and on the
mailing lists where they have sat too long due to me taking a long
time to catch up on my pending patch queue"
* tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
VMCI: Use threaded irqs instead of tasklets
misc: fastrpc: Pass bitfield into qcom_scm_assign_mem
gsmi: fix null-deref in gsmi_get_variable
misc: fastrpc: Fix use-after-free race condition for maps
misc: fastrpc: Don't remove map on creater_process and device_release
misc: fastrpc: Fix use-after-free and race in fastrpc_map_find
misc: fastrpc: fix error code in fastrpc_req_mmap()
mei: me: add meteor lake point M DID
mei: bus: fix unlink on bus in error path
w1: fix WARNING after calling w1_process()
w1: fix deadloop in __w1_remove_master_device()
comedi: adv_pci1760: Fix PWM instruction handling
interconnect: qcom: rpm: Use _optional func for provider clocks
interconnect: qcom: msm8996: Fix regmap max_register values
interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
Here are 3 small driver and kernel core fixes for 6.2-rc5. They
include:
- potential gadget fixup in do_prlimit
- device property refcount leak fix
- test_async_probe bugfix for reported problem.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY8wB5g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl+5ACfbXPXK7nokMtxvs/9ybhH+IM63X0AmwYXZ5mK
3dCNVFru/lAZzS7HaR5F
=4fuA
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small driver and kernel core fixes for 6.2-rc5. They
include:
- potential gadget fixup in do_prlimit
- device property refcount leak fix
- test_async_probe bugfix for reported problem"
* tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
prlimit: do_prlimit needs to have a speculation check
driver core: Fix test_async_probe_init saves device in wrong array
device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()
Here is a single staging driver fix for 6.2-rc5. It resolves a build
issue reported and Fixed by Arnd in the vc04_services driver. It's been
in linux-next this week with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY8wCRA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykjxQCfUhSZNjIy73tZg8haV7jXEVbekvAAoMz3Ploo
7TC1ZzaPkiQfIoagMcua
=UzbQ
-----END PGP SIGNATURE-----
Merge tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 6.2-rc5. It resolves a build
issue reported and Fixed by Arnd in the vc04_services driver. It's
been in linux-next this week with no reported problems"
* tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_arm: fix enum vchiq_status return types
Here are some small tty and serial driver fixes for 6.2-rc5 that resolve
a number of tiny reported issues and some new device ids. They include:
- new device id for the exar serial driver
- speakup tty driver bugfix
- atmel serial driver baudrate fixup
- stm32 serial driver bugfix and then revert as the bugfix broke the
build. That will come back in a later pull request once it is all
worked out properly.
- amba-pl011 serial driver rs486 mode bugfix
- qcom_geni serial driver bugfix
Most of these have been in linux-next with no reported problems (well,
other than the build breakage which generated the revert), the new
device id passed 0-day testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY8wDQA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynGegCguB+ZpDHKt9wccrGP3h/dwT2MAm8AnAqG4bmy
Yw/cHHPt9gx+AW6RBtAL
=EymN
-----END PGP SIGNATURE-----
Merge tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.2-rc5 that
resolve a number of tiny reported issues and some new device ids. They
include:
- new device id for the exar serial driver
- speakup tty driver bugfix
- atmel serial driver baudrate fixup
- stm32 serial driver bugfix and then revert as the bugfix broke the
build. That will come back in a later pull request once it is all
worked out properly.
- amba-pl011 serial driver rs486 mode bugfix
- qcom_geni serial driver bugfix
Most of these have been in linux-next with no reported problems (well,
other than the build breakage which generated the revert), the new
device id passed 0-day testing"
* tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: exar: Add support for Sealevel 7xxxC serial cards
Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler"
tty: serial: qcom_geni: avoid duplicate struct member init
serial: atmel: fix incorrect baudrate setup
tty: fix possible null-ptr-defer in spk_ttyio_release
serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
serial: amba-pl011: fix high priority character transmission in rs486 mode
serial: pch_uart: Pass correct sg to dma_unmap_sg()
tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer
Here are a number of small USB and Thunderbolt driver fixes and new
device id changes for 6.2-rc5. Included in here are:
- thunderbolt bugfixes for reported problems
- new usb-serial driver ids added
- onboard_hub usb driver fixes for much-reported problems
- xhci bugfixes
- typec bugfixes
- ehci-fsl driver module alias fix
- iowarrior header size fix
- usb gadget driver fixes
All of these, except for the iowarrior fix, have been in linux-next with
no reported issues. The iowarrior fix passed the 0-day testing and is a
one digit change based on a reported problem in the driver (which was
written to a spec, not the real device that is now available.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY8wETA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymzQQCbBOPYVF6LWGoUCAi5nFbPgz0yAPYAoMpVH8Gx
iSoT351gbn65LS+45ehc
=mGTv
-----END PGP SIGNATURE-----
Merge tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are a number of small USB and Thunderbolt driver fixes and new
device id changes for 6.2-rc5. Included in here are:
- thunderbolt bugfixes for reported problems
- new usb-serial driver ids added
- onboard_hub usb driver fixes for much-reported problems
- xhci bugfixes
- typec bugfixes
- ehci-fsl driver module alias fix
- iowarrior header size fix
- usb gadget driver fixes
All of these, except for the iowarrior fix, have been in linux-next
with no reported issues. The iowarrior fix passed the 0-day testing
and is a one digit change based on a reported problem in the driver
(which was written to a spec, not the real device that is now
available)"
* tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100
usb: host: ehci-fsl: Fix module alias
usb: dwc3: fix extcon dependency
usb: core: hub: disable autosuspend for TI TUSB8041
USB: fix misleading usb_set_intfdata() kernel doc
usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()
USB: gadget: Add ID numbers to configfs-gadget driver names
usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail
usb: gadget: g_webcam: Send color matching descriptor per frame
usb: typec: altmodes/displayport: Use proper macro for pin assignment check
usb: typec: altmodes/displayport: Fix pin assignment calculation
usb: typec: altmodes/displayport: Add pin assignment helper
usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
usb: misc: onboard_hub: Move 'attach' work to the driver
usb: misc: onboard_hub: Invert driver registration order
usb: ucsi: Ensure connector delayed work items are flushed
usb: musb: fix error return code in omap2430_probe()
usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)
xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables
...
- Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error messages
when GNU Make 4.4 is used.
- Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.
- Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.
- Support GNU Make 4.4 for scripts/jobserver-exec.
- Show clearer error message when kernel/gen_kheaders.sh fails due to
missing cpio.
-----BEGIN PGP SIGNATURE-----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=m1Ee
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error
messages when GNU Make 4.4 is used.
- Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.
- Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.
- Support GNU Make 4.4 for scripts/jobserver-exec.
- Show clearer error message when kernel/gen_kheaders.sh fails due to
missing cpio.
* tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kheaders: explicitly validate existence of cpio command
scripts: support GNU make 4.4 in jobserver-exec
kconfig: Update all declared targets
scripts: rpm: make clear that mkspec script contains 4.13 feature
init/Kconfig: fix LOCALVERSION_AUTO help text
kbuild: fix 'make modules' error when CONFIG_DEBUG_INFO_BTF_MODULES=y
kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux
init/version-timestamp.c: remove unneeded #include <linux/version.h>
docs: kbuild: remove mention to dropped $(objtree) feature
We potentially have old hashes of the xattr names generated on systems
with signed 'char' types. Now that everybody uses '-funsigned-char',
those hashes will no longer match.
This only happens if you use xattrs names that have the high bit set,
which probably doesn't happen in practice, but the xfstest generic/454
shows it.
Instead of adding a new "signed xattr hash filesystem" bit and having to
deal with all the possible combinations, just calculate the hash both
ways if the first one fails, and always generate new hashes with the
proper unsigned char version.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202212291509.704a11c9-oliver.sang@intel.com
Link: https://lore.kernel.org/all/CAHk-=whUNjwqZXa-MH9KMmc_CpQpoFKFjAB9ZKHuu=TbsouT4A@mail.gmail.com/
Exposed-by: 3bc753c06d ("kbuild: treat char as always unsigned")
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Theodore Ts'o <tytso@mit.edu>,
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_prlimit() adds the user-controlled resource value to a pointer that
will subsequently be dereferenced. In order to help prevent this
codepath from being used as a spectre "gadget" a barrier needs to be
added after checking the range.
Reported-by: Jordy Zomer <jordyzomer@google.com>
Tested-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- fix a potential race condition and always set GPIOs used as interrupt
source to input in gpio-mxc
- fix a GPIO ACPI-related issue with system suspend on Clevo NL5xRU
-----BEGIN PGP SIGNATURE-----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=x2Ca
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a potential race condition and always set GPIOs used as interrupt
source to input in gpio-mxc
- fix a GPIO ACPI-related issue with system suspend on Clevo NL5xRU
* tag 'gpio-fixes-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU
gpiolib: acpi: Allow ignoring wake capability on pins that aren't in _AEI
gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode
gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock
-----BEGIN PGP SIGNATURE-----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=k4Xk
-----END PGP SIGNATURE-----
Merge tag '6.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
- important fix for packet signature calculation error
- three fixes to correct DFS deadlock, and DFS refresh problem
- remove an unused DFS function, and duplicate tcon refresh code
- DFS cache lookup fix
- uninitialized rc fix
* tag '6.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: remove unused function
cifs: do not include page data when checking signature
cifs: fix return of uninitialized rc in dfs_cache_update_tgthint()
cifs: handle cache lookup errors different than -ENOENT
cifs: remove duplicate code in __refresh_tcon()
cifs: don't take exclusive lock for updating target hints
cifs: avoid re-lookups in dfs_cache_find()
cifs: fix potential deadlock in cache_refresh_path()
- Compilation fix for Sunplus sp7021
- Add some missing headers after a cleanup to the Nomadik driver
- Fix pull type and mux routes on Rockchip RK3568
-----BEGIN PGP SIGNATURE-----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=8RV7
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Compilation fix for Sunplus sp7021
- Add some missing headers after a cleanup to the Nomadik driver
- Fix pull type and mux routes on Rockchip RK3568
* tag 'pinctrl-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: rockchip: fix mux route data for rk3568
pinctrl: rockchip: fix reading pull type on rk3568
pinctrl: nomadik: Add missing header(s)
pinctrl: sp7021: fix unused function warning
- Several hfi1 patches fixing some long standing driver bugs
- Overflow when working with sg lists with elements greater than 4G
- An rxe regression with object numbering after the mrs reach their limit
- A theoretical problem with the scatterlist merging code
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY8sBzAAKCRCFwuHvBreF
YWMBAP92rk8L3oLrNbYTryNTv8w/LicLhmAvhC42KRy8klvFkAD6A+wskhxmHMgO
aSdznob6peMEyNONZUKcijqjnSXhyAY=
=brq4
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
- Several hfi1 patches fixing some long standing driver bugs
- Overflow when working with sg lists with elements greater than 4G
- An rxe regression with object numbering after the mrs reach their
limit
- A theoretical problem with the scatterlist merging code
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
lib/scatterlist: Fix to calculate the last_pg properly
IB/hfi1: Remove user expected buffer invalidate race
IB/hfi1: Immediately remove invalid memory from hardware
IB/hfi1: Fix expected receive setup error exit issues
IB/hfi1: Reserve user expected TIDs
IB/hfi1: Reject a zero-length user expected buffer
RDMA/core: Fix ib block iterator counter overflow
RDMA/rxe: Prevent faulty rkey generation
RDMA/rxe: Fix inaccurate constants in rxe_type_info
A previous commit fixed a poll race that can occur, but it's only
applicable for multishot requests. For a multishot request, we can safely
ignore a spurious wakeup, as we never leave the waitqueue to begin with.
A blunt reissue of a multishot armed request can cause us to leak a
buffer, if they are ring provided. While this seems like a bug in itself,
it's not really defined behavior to reissue a multishot request directly.
It's less efficient to do so as well, and not required to rearm anything
like it is for singleshot poll requests.
Cc: stable@vger.kernel.org
Fixes: 6e5aedb932 ("io_uring/poll: attempt request issue after racy poll wakeup")
Reported-and-tested-by: Olivier Langlois <olivier@trillion01.com>
Link: https://github.com/axboe/liburing/issues/778
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=L12Q
-----END PGP SIGNATURE-----
Merge tag 'block-6.2-2023-01-20' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Various little tweaks all over the place:
- NVMe pull request via Christoph:
- fix controller shutdown regression in nvme-apple (Janne Grunau)
- fix a polling on timeout regression in nvme-pci (Keith Busch)
- Fix a bug in the read request side request allocation caching
(Pavel)
- pktcdvd was brought back after we configured a NULL return on bio
splits, make it consistent with the others (me)
- BFQ refcount fix (Yu)
- Block cgroup policy activation fix (Yu)
- Fix for an md regression introduced in the 6.2 cycle (Adrian)"
* tag 'block-6.2-2023-01-20' of git://git.kernel.dk/linux:
nvme-pci: fix timeout request state check
nvme-apple: only reset the controller when RTKit is running
nvme-apple: reset controller during shutdown
block: fix hctx checks for batch allocation
block/rnbd-clt: fix wrong max ID in ida_alloc_max
blk-cgroup: fix missing pd_online_fn() while activating policy
pktcdvd: check for NULL returna fter calling bio_split_to_limits()
block, bfq: switch 'bfqg->ref' to use atomic refcount apis
md: fix incorrect declaration about claim_rdev in md_import_device
-----BEGIN PGP SIGNATURE-----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=/7Uv
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.2-2023-01-20' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Fixes for the MSG_RING opcode. Nothing really major:
- Fix an overflow missing serialization around posting CQEs to the
target ring (me)
- Disable MSG_RING on a ring that isn't enabled yet. There's nothing
really wrong with allowing it, but 1) it's somewhat odd as nobody
can receive them yet, and 2) it means that using the right delivery
mechanism might change. As nobody should be sending CQEs to a ring
that isn't enabled yet, let's just disable it (Pavel)
- Tweak to when we decide to post remotely or not for MSG_RING
(Pavel)"
* tag 'io_uring-6.2-2023-01-20' of git://git.kernel.dk/linux:
io_uring/msg_ring: fix remote queue to disabled ring
io_uring/msg_ring: fix flagging remote execution
io_uring/msg_ring: fix missing lock on overflow for IOPOLL
io_uring/msg_ring: move double lock/unlock helpers higher up
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmPKw1QACgkQxWXV+ddt
WDtwJw//UjVo7LEI6A86M73n/hGl/VDDJGaWB/FN/jrHoCeMrwd9BrC+ziD8Z8sx
YoPJm9BIvvURFHZk257YuJmrkjWzh2x5T59BpsMjhg0MOiFNWIP+Cm4bc1pDgXoE
1y3YVYja3lvhR8IlUV9XGtNh16AVCzY5JQ3W8xem67+IIwa5xmOJRmDO1VIjHMGo
kpWNTDBBIBFTfkeXqZFRaHVnf99YDBKtm3zPjsvSafqewYrVHV+Ioy19f5OAprIm
E3gDVAZa5qzT0wX4Za0C9JgtlSIAQ9Q0z6s8DLbFF5B1sT1hJPKmadMSC7mvihI8
edQHuZnNmQ0ppGWK0jzxL3bLeF4fRq/u+/MxGx27OVyrdvZ3dD9VXWfxoEQ+lisI
NrN8MvYtHH2Rnm2o9eiH9oIdbEame4yd31j4KhId6BjRALpmASnXY1vfv4m+Fsja
JJ3VCQyuVCkOoC4lvLHku+/uNWpRX8xs18Bt80M/olrNM8JZc4EXssv/5uguAWOc
5SLwpkppnlHAGYOlva3TNV15mBO9gUiLQJ6YCAM2WQM+0+LmIMlSkc90n38g7KzP
351zvxkMbcaM9gRChfPxjejCJw0KY3Y5VbTyBJR65RQfQ2UM4B0QBeA10/zQSG3O
gzB4M3at6jSwP4Z731k53q1dIZf4PMSaZVLiARrSTssSrcg6wSU=
=Kqrg
-----END PGP SIGNATURE-----
Merge tag 'for-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential out-of-bounds access to leaf data when seeking in an
inline file
- fix potential crash in quota when rescan races with disable
- reimplement super block signature scratching by marking page/folio
dirty and syncing block device, allow removing write_one_page
* tag 'for-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix race between quota rescan and disable leading to NULL pointer deref
btrfs: fix invalid leaf access due to inline extent during lseek
btrfs: stop using write_one_page in btrfs_scratch_superblock
btrfs: factor out scratching of one regular super block
