Enable DFLL clock for Smaug board.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add CPU power rail regulator for Smaug board.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable DFLL clock for Jetson TX1 platform.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add pinmux for PWM-based DFLL support.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add CPU clocks for Tegra210.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add essential DFLL clock properties for Tegra210.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The new prefix allows the GPIOs to be uniquely identified on a per-chip
basis, which makes it easier to distinguish Tegra186 specific GPIOs from
those of later chips such as Tegra194 which supports a very different
set of GPIOs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The new prefix allows the GPIOs to be uniquely identified on a per-chip
basis, which makes it easier to distinguish Tegra186 specific GPIOs from
those of later chips such as Tegra194 which supports a very different
set of GPIOs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
At some point during rebases these were shuffled around. Put them in the
right order again (sorted by unit-address).
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add regulators to the Tegra210 Darcy DTS file including support for
the MAX77620 PMIC.
Signed-off-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add initial device-tree support for NVIDIA Shield TV (a.k.a. Darcy)
based upon Tegra210 SoC with 3 GiB of LPDDR4 RAM.
Signed-off-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Instead of hardcoding the value (0), reuse the symbolic name from
dt-bindings/interrupt-controller/arm-gic.h.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fix IRQ type of PMIC which should be configured as high-level trigger.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fix the register range of apbmisc, that originally inherited from
Tegra124.
Reported-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
gpio-keys,name is not a valid property supported by gpio-keys
driver so remove it from DTS.
Signed-off-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Technically the display-hub driver could access registers via the
specified region, though it practice it will do so via the display
controllers' register regions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Technically the display-hub driver could access registers via the
specified region, though it practice it will do so via the display
controllers' register regions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The CEC controller found on Tegra194 can be used to control consumer
devices using the HDMI CEC pin.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The HDA controller found on Tegra194 can be used for audio playback over
HDMI.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The CEC controller found on Tegra186 can be used to control consumer
devices using the HDMI CEC pin.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The P2888 processor module contains a TI TMP451 temperature sensor with
two channels. These are used to measure the temperatures at different
locations on the module.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The power and force recovery buttons found on Jetson Xavier are hooked
up to two Tegra GPIOs. The power button can also function as a wake-up
source.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The AON GPIO controller is in an always-on power partition and typically
provides pins for functions that need to always work, such as the power
key for example.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The on-die RTC isn't hooked up to a backup battery, so it isn't useful
to track time across reboots, but as long as power remains enabled, it
keeps track of time accurately and can be used to wake the system from
sleep, for example.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The RTC on Tegra194 is very similar to the RTC on earlier generations.
One notable exception is that the source clock is now the 32 kHz clock
instead of a dedicated RTC clock and the RTC alarm is a wake event and
can be used to wake the system from sleep.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Wake events are a feature that allows the interrupt and GPIO controllers
to be powered off as part of system sleep. The PMC which is always on is
monitoring these wake events and can power up subsequent controllers as
necessary to process them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The on-die RTC isn't hooked up to a backup battery, so it isn't useful
to track time across reboots, but as long as power remains enabled, it
keeps track of time accurately and can be used to wake the system from
sleep, for example.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The RTC on Tegra186 is very similar to the RTC on earlier generations.
One notable exception is that the source clock is now the 32 kHz clock
instead of a dedicated RTC clock and the RTC alarm is a wake event and
can be used to wake the system from sleep.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Wake events are a feature that allows the interrupt and GPIO controllers
to be powered off as part of system sleep. The PMC which is always on is
monitoring these wake events and can power up subsequent controllers as
necessary to process them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
In order for the correct interrupt type to be configured, the event
action for the power key needs to be "asserted".
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable these thermal zones to be able to monitor their temperatures and
control the fan to cool down the system if necessary.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the 5V HDMI regulator and hook up the VDD_1V0 and VDD_1V8HS supplies
from the PMIC to the display block. Also enable the display hub which is
responsible for instantiating the display controllers. Finally, enable
the third SOR that drives the TMDS signals to the HDMI connector.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra194 has a version of VIC that is very similar to that on Tegra186.
Add the device tree node for it that is enabled by default.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra194 contains a display architecture very similar to that found on
the Tegra186. One notable exception is that DSI is no longer a supported
output. Instead there are four display controllers and four SORs (with a
DPAUX associated to each of them) that can drive HDMI or DP.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The official name for the P2972-0000 board is Jetson AGX Xavier
Development Kit. Set that as the model string in the device tree for
clarity.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Populate the power-domain properties for the xHCI device for Tegra210.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra194 contains a version of the I2C controller that is no longer
compatible with the version found in Tegra114.
Signed-off-by: Thierry Reding <treding@nvidia.com>
