mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-25 13:14:07 +08:00
d42b8dbec4
21125 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Thadeu Lima de Souza Cascardo
|
d42b8dbec4 |
selftests/seccomp: allow clock_nanosleep instead of nanosleep
glibc 2.31 calls clock_nanosleep when its nanosleep function is used. So the restart_syscall fails after that. In order to deal with it, we trace clock_nanosleep and nanosleep. Then we check for either. This works just fine on systems with both glibc 2.30 and glibc 2.31, whereas it failed before on a system with glibc 2.31. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
Andrea Righi
|
651e0d8814 |
kselftest/runner: allow to properly deliver signals to tests
While running seccomp_bpf, kill_after_ptrace() gets stuck if we run it via /usr/bin/timeout (that is the default), until the timeout expires. This is because /usr/bin/timeout is preventing to properly deliver signals to ptrace'd children (SIGSYS in this case). This problem can be easily reproduced by running: $ sudo make TARGETS=seccomp kselftest ... # [ RUN ] TRACE_syscall.skip_a# not ok 1 selftests: seccomp: seccomp_bpf # TIMEOUT The test is hanging at this point until the timeout expires and then it reports the timeout error. Prevent this problem by passing --foreground to /usr/bin/timeout, allowing to properly deliver signals to children processes. Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
Colin Ian King
|
d925c89695 |
selftests/harness: fix spelling mistake "SIGARLM" -> "SIGALRM"
There a few identical spelling mistakes, fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
Shuah Khan
|
ffa773e101 |
selftests: Fix memfd test run-time regression
Commit |
||
Sandipan Das
|
963e3e9c9a |
selftests: vm: Fix 64-bit test builds for powerpc64le
Some tests are built only for 64-bit systems. This makes
sure that these tests are built for both big and little
endian variants of powerpc64.
Fixes:
|
||
|
Sandipan Das
|
24c3f063c5 |
selftests: vm: Do not override definition of ARCH
Independent builds of the vm selftests is currently broken because commit |
||
Linus Torvalds
|
b753101a4a |
Kbuild updates for v5.7 (2nd)
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y,
which allows us to remove the lib-ksyms.o workaround, and to
solve the last known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler
tests in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
-----BEGIN PGP SIGNATURE-----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=jpyF
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
allows us to remove the lib-ksyms.o workaround, and to solve the last
known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler tests
in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
kbuild: fix comment about missing include guard detection
kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
kbuild: replace AS=clang with LLVM_IAS=1
kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
Documentation/llvm: fix the name of llvm-size
kbuild: mkcompile_h: Include $LD version in /proc/version
kconfig: qconf: Fix a few alignment issues
kconfig: qconf: remove some old bogus TODOs
kconfig: qconf: fix support for the split view mode
kconfig: qconf: fix the content of the main widget
kconfig: qconf: Change title for the item window
kconfig: qconf: clean deprecated warnings
gcc-plugins: drop support for GCC <= 4.7
kbuild: Enable -Wtautological-compare
x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
...
|
||
Pali Rohár
|
149ed3d404 |
change email address for Pali Rohár
For security reasons I stopped using gmail account and kernel address is now up-to-date alias to my personal address. People periodically send me emails to address which they found in source code of drivers, so this change reflects state where people can contact me. [ Added .mailmap entry as per Joe Perches - Linus ] Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joe Perches <joe@perches.com> Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Eric Biggers
|
23756e551f |
selftests: kmod: test disabling module autoloading
Test that request_module() fails with -ENOENT when /proc/sys/kernel/modprobe contains (a) a nonexistent path, and (b) an empty path. Case (b) is a regression test for the patch "kmod: make request_module() return an error when autoloading is disabled". Tested with 'kmod.sh -t 0010 && kmod.sh -t 0011', and also simply with 'kmod.sh' to run all kmod tests. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: NeilBrown <neilb@suse.com> Link: http://lkml.kernel.org/r/20200312202552.241885-5-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Eric Biggers
|
6d573a0752 |
selftests: kmod: fix handling test numbers above 9
get_test_count() and get_test_enabled() were broken for test numbers above 9 due to awk interpreting a field specification like '$0010' as octal rather than decimal. Fix it by stripping the leading zeroes. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: NeilBrown <neilb@suse.com> Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
e4da01d833 |
powerpc updates for 5.7 #2
- A fix for a crash in machine check handling on pseries (ie. guests)
- A small series to make it possible to disable CONFIG_COMPAT, and turn it off
by default for ppc64le where it's not used.
- A few other miscellaneous fixes and small improvements.
Thanks to:
Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann, Christophe Leroy, Dan
Carpenter, Ganesh Goudar, Geert Uytterhoeven, Geoff Levand, Mahesh Salgaonkar,
Markus Elfring, Michal Suchanek, Nicholas Piggin, Stephen Boyd, Wen Xiong.
-----BEGIN PGP SIGNATURE-----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=72sb
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"The bulk of this is the series to make CONFIG_COMPAT user-selectable,
it's been around for a long time but was blocked behind the
syscall-in-C series.
Plus there's also a few fixes and other minor things.
Summary:
- A fix for a crash in machine check handling on pseries (ie. guests)
- A small series to make it possible to disable CONFIG_COMPAT, and
turn it off by default for ppc64le where it's not used.
- A few other miscellaneous fixes and small improvements.
Thanks to: Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann,
Christophe Leroy, Dan Carpenter, Ganesh Goudar, Geert Uytterhoeven,
Geoff Levand, Mahesh Salgaonkar, Markus Elfring, Michal Suchanek,
Nicholas Piggin, Stephen Boyd, Wen Xiong"
* tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Always build the tm-poison test 64-bit
powerpc: Improve ppc_save_regs()
Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"
powerpc/time: Replace <linux/clk-provider.h> by <linux/of_clk.h>
powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory
powerpc/perf: split callchain.c by bitness
powerpc/64: Make COMPAT user-selectable disabled on littleendian by default.
powerpc/64: make buildable without CONFIG_COMPAT
powerpc/perf: consolidate valid_user_sp -> invalid_user_sp
powerpc/perf: consolidate read_user_stack_32
powerpc: move common register copy functions from signal_32.c to signal.c
powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro
powerpc/ps3: Set CONFIG_UEVENT_HELPER=y in ps3_defconfig
powerpc/ps3: Remove an unneeded NULL check
powerpc/ps3: Remove duplicate error message
powerpc/powernv: Re-enable imc trace-mode in kernel
powerpc/perf: Implement a global lock to avoid races between trace, core and thread imc events.
powerpc/pseries: Fix MCE handling on pseries
selftests/eeh: Skip ahci adapters
powerpc/64s: Fix doorbell wakeup msgclr optimisation
|
||
|
Linus Torvalds
|
9b06860d7c |
libnvdimm for 5.7
- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach in
the platform-memory subsystem before the platform will consider them
power-fail protected.
- Promote numa_map_to_online_node() to a cross-kernel generic facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit test
compilation fixups.
- Fixup some flexible-array declarations.
-----BEGIN PGP SIGNATURE-----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=sY4N
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and dax updates from Dan Williams:
"There were multiple touches outside of drivers/nvdimm/ this round to
add cross arch compatibility to the devm_memremap_pages() interface,
enhance numa information for persistent memory ranges, and add a
zero_page_range() dax operation.
This cycle I switched from the patchwork api to Konstantin's b4 script
for collecting tags (from x86, PowerPC, filesystem, and device-mapper
folks), and everything looks to have gone ok there. This has all
appeared in -next with no reported issues.
Summary:
- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach
in the platform-memory subsystem before the platform will consider
them power-fail protected.
- Promote numa_map_to_online_node() to a cross-kernel generic
facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit
test compilation fixups.
- Fixup some flexible-array declarations"
* tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits)
dax: Move mandatory ->zero_page_range() check in alloc_dax()
dax,iomap: Add helper dax_iomap_zero() to zero a range
dax: Use new dax zero page method for zeroing a page
dm,dax: Add dax zero_page_range operation
s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver
dax, pmem: Add a dax operation zero_page_range
pmem: Add functions for reading/writing page to/from pmem
libnvdimm: Update persistence domain value for of_pmem and papr_scm device
tools/test/nvdimm: Fix out of tree build
libnvdimm/region: Fix build error
libnvdimm/region: Replace zero-length array with flexible-array member
libnvdimm/label: Replace zero-length array with flexible-array member
ACPI: NFIT: Replace zero-length array with flexible-array member
libnvdimm/region: Introduce an 'align' attribute
libnvdimm/region: Introduce NDD_LABELING
libnvdimm/namespace: Enforce memremap_compat_align()
libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid
libnvdimm: Out of bounds read in __nd_ioctl()
acpi/nfit: improve bounds checking for 'func'
mm/memremap_pages: Introduce memremap_compat_align()
...
|
||
Masahiro Yamada
|
a0d1c951ef |
kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
As Documentation/kbuild/llvm.rst implies, building the kernel with a full set of LLVM tools gets very verbose and unwieldy. Provide a single switch LLVM=1 to use Clang and LLVM tools instead of GCC and Binutils. You can pass it from the command line or as an environment variable. Please note LLVM=1 does not turn on the integrated assembler. You need to pass LLVM_IAS=1 to use it. When the upstream kernel is ready for the integrated assembler, I think we can make it default. We discussed what we need, and we agreed to go with a simple boolean flag that switches both target and host tools: https://lkml.org/lkml/2020/3/28/494 https://lkml.org/lkml/2020/4/3/43 Some items discussed, but not adopted: - LLVM_DIR When multiple versions of LLVM are installed, I just thought supporting LLVM_DIR=/path/to/my/llvm/bin/ might be useful. CC = $(LLVM_DIR)clang LD = $(LLVM_DIR)ld.lld ... However, we can handle this by modifying PATH. So, we decided to not do this. - LLVM_SUFFIX Some distributions (e.g. Debian) package specific versions of LLVM with naming conventions that use the version as a suffix. CC = clang$(LLVM_SUFFIX) LD = ld.lld(LLVM_SUFFIX) ... will allow a user to pass LLVM_SUFFIX=-11 to use clang-11 etc., but the suffixed versions in /usr/bin/ are symlinks to binaries in /usr/lib/llvm-#/bin/, so this can also be handled by PATH. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> |
||
|
Linus Torvalds
|
9bb715260e |
virtio: fixes, vdpa
Some bug fixes. The new vdpa subsystem with two first drivers. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl6MS7wPHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpGp8H/2H49Gya1cfVbGU13qgmBSQqQXC8hS3iNLuG ltRgU+jafJT//kvkdm3/DUzfK3eRUWUfqZLKEbAQDtMY0OGHi/KGEBYVLDde7Zxt Lg4VnwBhkYDR/f01ZZDbHxzj9JAr83i28nILjLIqf3a1BX4zf203+ZE0/JM8a7wL dOPoH7NAfyz5ul2F67bR1IOF8vC6TidpavzR2+HC/MocHYXb6Bgfvt+i4EcrfuMf 9lnBfajgklKr9sNJniwvvR1pWVg+YyG3VeC6T8tIC/xzbCmIoNT+5b3q2XPSIHq1 EuQTeXH9CBFXS0qcFlq2ktR1xd1Lx95hKwZpqLwLFDmfgjhV2QU= =/84P -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: - Some bug fixes - The new vdpa subsystem with two first drivers * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM" vdpa: move to drivers/vdpa virtio: Intel IFC VF driver for VDPA vdpasim: vDPA device simulator vhost: introduce vDPA-based backend virtio: introduce a vDPA based transport vDPA: introduce vDPA bus vringh: IOTLB support vhost: factor out IOTLB vhost: allow per device message handler vhost: refine vhost and vringh kconfig virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM virtio-net: Introduce hash report feature virtio-net: Introduce RSS receive steering feature virtio-net: Introduce extended RSC feature tools/virtio: option to build an out of tree module |
||
|
Linus Torvalds
|
34183ddd13 |
- Convert tsens configuration DT binding to yaml (Rajeshwari)
- Add interrupt support on the rcar sensor (Niklas Söderlund) - Add a new Spreadtrum thermal driver (Baolin Wang) - Add thermal binding for the fsl scu board, a new API to retrieve the sensor id bound to the thermal zone and i.MX system controller sensor (Anson Huang)) - Remove warning log when a deferred probe is requested on Exynos (Marek Szyprowski) - Add the thermal monitoring unit support for imx8mm with its DT bindings (Anson Huang) - Rephrase the Kconfig text for clarity (Linus Walleij) - Use the gpio descriptor for the ti-soc-thermal (Linus Walleij) - Align msg structure to 4 bytes for i.MX SC, fix the Kconfig dependency, add the __may_be unused annotation for PM functions and the COMPILE_TEST option for imx8mm (Anson Huang) - Fix a dependency on regmap in Kconfig for qoriq (Yuantian Tang) - Add DT binding and support for the rcar gen3 r8a77961 and improve the error path on the rcar init function (Niklas Söderlund) - Cleanup and improvements for the tsens Qcom sensor (Amit Kucheria) - Improve code by removing lock and caching values in the rcar thermal sensor (Niklas Söderlund) - Cleanup in the qoriq drivers and add a call to imx_thermal_unregister_legacy_cooling in the removal function (Anson Huang) - Remove redundant 'maxItems' in tsens and sprd DT bindings (Rob Herring) - Change the thermal DT bindings by making the cooling-maps optional (Yuantian Tang) - Add Tiger Lake support (Sumeet Pawnikar) - Use scnprintf() for avoiding potential buffer overflow (Takashi Iwai) - Make pkg_temp_lock a raw_spinlock_t(Clark Williams) - Fix incorrect data types by changing them to signed on i.MX SC (Anson Huang) - Replace zero-length array with flexible-array member (Gustavo A. R. Silva) - Add support for i.MX8MP in the driver and in the DT bindings (Anson Huang) - Fix return value of the cpufreq_set_cur_state() function (Willy Wolff) - Remove abusing and scary WARN_ON in the cpufreq cooling device (Daniel Lezcano) - Fix build warning of incorrect argument type reported by sparse on imx8mm (Anson Huang) - Fix stub for the devfreq cooling device (Martin Blumenstingl) - Fix cpu idle cooling documentation (Sergey Vidishev) -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl6MXkEACgkQqDIjiipP 6E+BIggAh52YBU8D8GthsvCPTgka95+wAIaZtx4Y7UnhvshHhM2w+m97TQOXK373 95mwO9mwQuAoksSmLo7pBQYJ7HItQ26Yoq9akpOL6EiT+BEWiqoHJgl+afVVtoKa n67d3Pa6coup1+PQNIA8kpTIOmUQTP8THtwpZ3HlChWsg22NTd0QUGpGJ1TtBD/q KqMdQjxahFJ4RTYsnECWBkw3EMkczMNMgdrXEvm4rMkcaJzv9g2ZPqerOShK/RzP 8sejWczt6jaRwu4hLpd/lLikTSHZoXMFJ8ylAiQXFELCPAQIrMS/ae+dTGJ4qP7x hkjsewPbeA1Z+al/IBVHiCtOzKkICQ== =XDYl -----END PGP SIGNATURE----- Merge tag 'thermal-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Convert tsens configuration DT binding to yaml (Rajeshwari) - Add interrupt support on the rcar sensor (Niklas Söderlund) - Add a new Spreadtrum thermal driver (Baolin Wang) - Add thermal binding for the fsl scu board, a new API to retrieve the sensor id bound to the thermal zone and i.MX system controller sensor (Anson Huang)) - Remove warning log when a deferred probe is requested on Exynos (Marek Szyprowski) - Add the thermal monitoring unit support for imx8mm with its DT bindings (Anson Huang) - Rephrase the Kconfig text for clarity (Linus Walleij) - Use the gpio descriptor for the ti-soc-thermal (Linus Walleij) - Align msg structure to 4 bytes for i.MX SC, fix the Kconfig dependency, add the __may_be unused annotation for PM functions and the COMPILE_TEST option for imx8mm (Anson Huang) - Fix a dependency on regmap in Kconfig for qoriq (Yuantian Tang) - Add DT binding and support for the rcar gen3 r8a77961 and improve the error path on the rcar init function (Niklas Söderlund) - Cleanup and improvements for the tsens Qcom sensor (Amit Kucheria) - Improve code by removing lock and caching values in the rcar thermal sensor (Niklas Söderlund) - Cleanup in the qoriq drivers and add a call to imx_thermal_unregister_legacy_cooling in the removal function (Anson Huang) - Remove redundant 'maxItems' in tsens and sprd DT bindings (Rob Herring) - Change the thermal DT bindings by making the cooling-maps optional (Yuantian Tang) - Add Tiger Lake support (Sumeet Pawnikar) - Use scnprintf() for avoiding potential buffer overflow (Takashi Iwai) - Make pkg_temp_lock a raw_spinlock_t(Clark Williams) - Fix incorrect data types by changing them to signed on i.MX SC (Anson Huang) - Replace zero-length array with flexible-array member (Gustavo A. R. Silva) - Add support for i.MX8MP in the driver and in the DT bindings (Anson Huang) - Fix return value of the cpufreq_set_cur_state() function (Willy Wolff) - Remove abusing and scary WARN_ON in the cpufreq cooling device (Daniel Lezcano) - Fix build warning of incorrect argument type reported by sparse on imx8mm (Anson Huang) - Fix stub for the devfreq cooling device (Martin Blumenstingl) - Fix cpu idle cooling documentation (Sergey Vidishev) * tag 'thermal-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (52 commits) Documentation: cpu-idle-cooling: Fix diagram for 33% duty cycle thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n thermal: imx8mm: Fix build warning of incorrect argument type thermal/drivers/cpufreq_cooling: Remove abusing WARN_ON thermal/drivers/cpufreq_cooling: Fix return of cpufreq_set_cur_state thermal: imx8mm: Add i.MX8MP support dt-bindings: thermal: imx8mm-thermal: Add support for i.MX8MP thermal: qcom: tsens.h: Replace zero-length array with flexible-array member thermal: imx_sc_thermal: Fix incorrect data type thermal: int340x_thermal: Use scnprintf() for avoiding potential buffer overflow thermal: int340x: processor_thermal: Add Tiger Lake support thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t dt-bindings: thermal: make cooling-maps property optional dt-bindings: thermal: qcom-tsens: Remove redundant 'maxItems' dt-bindings: thermal: sprd: Remove redundant 'maxItems' thermal: imx: Calling imx_thermal_unregister_legacy_cooling() in .remove thermal: qoriq: Sort includes alphabetically thermal: qoriq: Use devm_add_action_or_reset() to handle all cleanups thermal: rcar_thermal: Remove lock in rcar_thermal_get_current_temp() thermal: rcar_thermal: Do not store ctemp in rcar_thermal_priv ... |
||
Roman Penyaev
|
282144e04b |
kselftest: introduce new epoll test case
This testcase repeats epollbug.c from the bug: https://bugzilla.kernel.org/show_bug.cgi?id=205933 What it tests? It tests the race between epoll_ctl() and epoll_wait(). New event mask passed to epoll_ctl() triggers wake up, which can be missed because of the bug described in the link. Reproduction is 100%, so easy to fix. Kudos, Max, for wonderful test case. Signed-off-by: Roman Penyaev <rpenyaev@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Max Neunhoeffer <max@arangodb.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Christopher Kohlhoff <chris.kohlhoff@clearpool.io> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Jes Sorensen <jes.sorensen@gmail.com> Link: http://lkml.kernel.org/r/20200214170211.561524-2-rpenyaev@suse.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
chenqiwu
|
8d994cada2 |
lib/rbtree: fix coding style of assignments
Leave blank space between the right-hand and left-hand side of the assignment to meet the kernel coding style better. Signed-off-by: chenqiwu <chenqiwu@xiaomi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Michel Lespinasse <walken@google.com> Link: http://lkml.kernel.org/r/1582621140-25850-1-git-send-email-qiwuchen55@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Peter Xu
|
9b12488a77 |
userfaultfd: selftests: add write-protect test
Add uffd tests for write protection.
Instead of introducing new tests for it, let's simply squashing uffd-wp
tests into existing uffd-missing test cases. Changes are:
(1) Bouncing tests
We do the write-protection in two ways during the bouncing test:
- By using UFFDIO_COPY_MODE_WP when resolving MISSING pages: then
we'll make sure for each bounce process every single page will be
at least fault twice: once for MISSING, once for WP.
- By direct call UFFDIO_WRITEPROTECT on existing faulted memories:
To further torture the explicit page protection procedures of
uffd-wp, we split each bounce procedure into two halves (in the
background thread): the first half will be MISSING+WP for each
page as explained above. After the first half, we write protect
the faulted region in the background thread to make sure at least
half of the pages will be write protected again which is the first
half to test the new UFFDIO_WRITEPROTECT call. Then we continue
with the 2nd half, which will contain both MISSING and WP faulting
tests for the 2nd half and WP-only faults from the 1st half.
(2) Event/Signal test
Mostly previous tests but will do MISSING+WP for each page. For
sigbus-mode test we'll need to provide standalone path to handle the
write protection faults.
For all tests, do statistics as well for uffd-wp pages.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20200220163112.11409-20-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Peter Xu
|
5c8aed6c1b |
userfaultfd: selftests: refactor statistics
Introduce uffd_stats structure for statistics of the self test, at the same time refactor the code to always pass in the uffd_stats for either read() or poll() typed fault handling threads instead of using two different ways to return the statistic results. No functional change. With the new structure, it's very easy to introduce new statistics. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-19-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
c48b07226b |
perf updates all over the place:
core:
- Support for cgroup tracking in samples to allow cgroup based
analysis
tools:
- Support for cgroup analysis
- Commandline option and hotkey for perf top to change the sort order
- A set of fixes all over the place
- Various build system related improvements
- Updates of the X86 pmu event JSON data
- Documentation updates
-----BEGIN PGP SIGNATURE-----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=2UUD
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more perf updates from Thomas Gleixner:
"Perf updates all over the place:
core:
- Support for cgroup tracking in samples to allow cgroup based
analysis
tools:
- Support for cgroup analysis
- Commandline option and hotkey for perf top to change the sort order
- A set of fixes all over the place
- Various build system related improvements
- Updates of the X86 pmu event JSON data
- Documentation updates"
* tag 'perf-urgent-2020-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
perf python: Fix clang detection to strip out options passed in $CC
perf tools: Support Python 3.8+ in Makefile
perf script: Fix invalid read of directory entry after closedir()
perf script report: Fix SEGFAULT when using DWARF mode
perf script: add -S/--symbols documentation
perf pmu-events x86: Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric
perf events parser: Add missing Intel CPU events to parser
perf script: Allow --symbol to accept hexadecimal addresses
perf report/top TUI: Fix title line formatting
perf top: Support hotkey to change sort order
perf top: Support --group-sort-idx to change the sort order
perf symbols: Fix arm64 gap between kernel start and module end
perf build-test: Honour JOBS to override detection of number of cores
perf script: Add --show-cgroup-events option
perf top: Add --all-cgroups option
perf record: Add --all-cgroups option
perf record: Support synthesizing cgroup events
perf report: Add 'cgroup' sort key
perf cgroup: Maintain cgroup hierarchy
perf tools: Basic support for CGROUP event
...
|
||
|
Linus Torvalds
|
d38c07afc3 |
powerpc updates for 5.7
- A large series from Nick for 64-bit to further rework our exception vectors,
and rewrite portions of the syscall entry/exit and interrupt return in C. The
result is much easier to follow code that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had become badly
intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings from the
workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and update the
status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to:
Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET,
Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David
Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R.
Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie
Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger,
Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira,
Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers,
Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi
Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek,
Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen
Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=ARdm
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Slightly late as I had to rebase mid-week to insert a bug fix:
- A large series from Nick for 64-bit to further rework our exception
vectors, and rewrite portions of the syscall entry/exit and
interrupt return in C. The result is much easier to follow code
that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had
become badly intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings
from the workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and
update the status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew
Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen
Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement
Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas,
Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman,
Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara,
Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor,
Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael
Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick
Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat,
Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff,
Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G
Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel
Datwyler, Vaibhav Jain, YueHaibing"
* tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
powerpc: Make setjmp/longjmp signature standard
powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type
powerpc: Suppress .eh_frame generation
powerpc: Drop -fno-dwarf2-cfi-asm
powerpc/32: drop unused ISA_DMA_THRESHOLD
powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces
selftests/powerpc: Fix try-run when source tree is not writable
powerpc/vmlinux.lds: Explicitly retain .gnu.hash
powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
powerpc/ptrace: create ppc_gethwdinfo()
powerpc/ptrace: create ptrace_get_debugreg()
powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
powerpc/ptrace: move register viewing functions out of ptrace.c
powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
powerpc/ptrace: split out SPE related functions.
powerpc/ptrace: split out ALTIVEC related functions.
powerpc/ptrace: split out VSX related functions.
powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
powerpc/ptrace: remove unused header includes
...
|
||
|
Linus Torvalds
|
aa1a8ce533 |
New tracing features:
- The ring buffer is no longer disabled when reading the trace file.
The trace_pipe file was made to be used for live tracing and reading
as it acted like the normal producer/consumer. As the trace file
would not consume the data, the easy way of handling it was to just
disable writes to the ring buffer. This came to a surprise to the
BPF folks who complained about lost events due to reading.
This is no longer an issue. If someone wants to keep the old disabling
there's a new option "pause-on-trace" that can be set.
- New set_ftrace_notrace_pid file. PIDs in this file will not be traced
by the function tracer. Similar to set_ftrace_pid, which makes the
function tracer only trace those tasks with PIDs in the file, the
set_ftrace_notrace_pid does the reverse.
- New set_event_notrace_pid file. PIDs in this file will cause events
not to be traced if triggered by a task with a matching PID.
Similar to the set_event_pid file but will not be traced.
Note, sched_waking and sched_switch events may still be trace if
one of the tasks referenced by those events contains a PID that
is allowed to be traced.
Tracing related features:
- New bootconfig option, that is attached to the initrd file.
If bootconfig is on the command line, then the initrd file
is searched looking for a bootconfig appended at the end.
- New GPU tracepoint infrastructure to help the gfx drivers to get
off debugfs (acked by Greg Kroah-Hartman)
Other minor updates and fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXokgWRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgrHAP0UkKs/52JY4oWa3OIh/OqK+vnCrIwz
zGvDFOYM0fKbwgD9FZWgzlcaYK5m2Cxlhp4VoraZveHMLJUhnEHtdX6X0wk=
=Rebj
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New tracing features:
- The ring buffer is no longer disabled when reading the trace file.
The trace_pipe file was made to be used for live tracing and
reading as it acted like the normal producer/consumer. As the trace
file would not consume the data, the easy way of handling it was to
just disable writes to the ring buffer.
This came to a surprise to the BPF folks who complained about lost
events due to reading. This is no longer an issue. If someone wants
to keep the old disabling there's a new option "pause-on-trace"
that can be set.
- New set_ftrace_notrace_pid file. PIDs in this file will not be
traced by the function tracer.
Similar to set_ftrace_pid, which makes the function tracer only
trace those tasks with PIDs in the file, the set_ftrace_notrace_pid
does the reverse.
- New set_event_notrace_pid file. PIDs in this file will cause events
not to be traced if triggered by a task with a matching PID.
Similar to the set_event_pid file but will not be traced. Note,
sched_waking and sched_switch events may still be traced if one of
the tasks referenced by those events contains a PID that is allowed
to be traced.
Tracing related features:
- New bootconfig option, that is attached to the initrd file.
If bootconfig is on the command line, then the initrd file is
searched looking for a bootconfig appended at the end.
- New GPU tracepoint infrastructure to help the gfx drivers to get
off debugfs (acked by Greg Kroah-Hartman)
And other minor updates and fixes"
* tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
tracing: Do not allocate buffer in trace_find_next_entry() in atomic
tracing: Add documentation on set_ftrace_notrace_pid and set_event_notrace_pid
selftests/ftrace: Add test to test new set_event_notrace_pid file
selftests/ftrace: Add test to test new set_ftrace_notrace_pid file
tracing: Create set_event_notrace_pid to not trace tasks
ftrace: Create set_ftrace_notrace_pid to not trace tasks
ftrace: Make function trace pid filtering a bit more exact
ftrace/kprobe: Show the maxactive number on kprobe_events
tracing: Have the document reflect that the trace file keeps tracing enabled
ring-buffer/tracing: Have iterator acknowledge dropped events
tracing: Do not disable tracing when reading the trace file
ring-buffer: Do not disable recording when there is an iterator
ring-buffer: Make resize disable per cpu buffer instead of total buffer
ring-buffer: Optimize rb_iter_head_event()
ring-buffer: Do not die if rb_iter_peek() fails more than thrice
ring-buffer: Have rb_iter_head_event() handle concurrent writer
ring-buffer: Add page_stamp to iterator for synchronization
ring-buffer: Rename ring_buffer_read() to read_buffer_iter_advance()
ring-buffer: Have ring_buffer_empty() not depend on tracing stopped
tracing: Save off entry when peeking at next entry
...
|
||
|
Linus Torvalds
|
828907ef25 |
This is the bulk of GPIO development for the v5.7 kernel cycle.
Core and userspace API:
- The userspace API KFIFOs have been imoproved with locks that
do not block interrupts. This makes us better at getting
events to userspace without blocking or disturbing new events
arriving in the same time. This was reviewed by the KFIFO
maintainer Stefani. This is a generic improvement which
paves the road for similar improvements in other subsystems.
- We provide a new ioctl() for monitoring changes in the line
information, such as when multiple clients are taking lines
and giving them back, possibly reconfiguring them in the
process: we can now monitor that and not get stuck with stale
static information.
- An example tool 'gpio-watch' is provided to showcase this
functionality.
- Timestamps for events are switched to ktime_get_ns() which is
monotonic. We previously had a 'realtime' stamp which could
move forward and *backward* in time, which probably would just
cause silent bugs and weird behaviour. In the long run we
see two relevant timestamps: ktime_get_ns() or the timestamp
sometimes provided by the GPIO hardware itself, if that
exists.
- Device Tree overlay support for GPIO hogs. On systems that
load overlays, these overlays can now contain hogs, and will
then be respected.
- Handle pin control interaction with nonexisting pin ranges
in the GPIO library core instead of in the individual
drivers.
New drivers:
- New driver for the Mellanox BlueField 2 GPIO controller.
Driver improvements:
- Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic
MMIO GPIO library and use this flag in the MT7621 driver.
- Texas Instruments OMAP CPU power management improvements,
such as blocking of idle on pending GPIO interrupts.
-----BEGIN PGP SIGNATURE-----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=EFm/
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO development for the v5.7 kernel cycle.
Core and userspace API:
- The userspace API KFIFOs have been imoproved with locks that do not
block interrupts. This makes us better at getting events to
userspace without blocking or disturbing new events arriving in the
same time. This was reviewed by the KFIFO maintainer Stefani. This
is a generic improvement which paves the road for similar
improvements in other subsystems.
- We provide a new ioctl() for monitoring changes in the line
information, such as when multiple clients are taking lines and
giving them back, possibly reconfiguring them in the process: we
can now monitor that and not get stuck with stale static
information.
- An example tool 'gpio-watch' is provided to showcase this
functionality.
- Timestamps for events are switched to ktime_get_ns() which is
monotonic. We previously had a 'realtime' stamp which could move
forward and *backward* in time, which probably would just cause
silent bugs and weird behaviour. In the long run we see two
relevant timestamps: ktime_get_ns() or the timestamp sometimes
provided by the GPIO hardware itself, if that exists.
- Device Tree overlay support for GPIO hogs. On systems that load
overlays, these overlays can now contain hogs, and will then be
respected.
- Handle pin control interaction with nonexisting pin ranges in the
GPIO library core instead of in the individual drivers.
New drivers:
- New driver for the Mellanox BlueField 2 GPIO controller.
Driver improvements:
- Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic MMIO GPIO
library and use this flag in the MT7621 driver.
- Texas Instruments OMAP CPU power management improvements, such as
blocking of idle on pending GPIO interrupts"
* tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (59 commits)
Revert "gpio: eic-sprd: Use devm_platform_ioremap_resource()"
pinctrl: Unconditionally assign .request()/.free()
gpio: Unconditionally assign .request()/.free()
gpio: export of_pinctrl_get to modules
pinctrl: Define of_pinctrl_get() dummy for !PINCTRL
gpio: Rename variable in core APIs
gpio: Avoid using pin ranges with !PINCTRL
gpiolib: Remove unused gpio_chip parameter from gpio_set_bias()
gpiolib: Pass gpio_desc to gpio_set_config()
gpiolib: Introduce gpiod_set_config()
tools: gpio: Fix out-of-tree build regression
gpio: gpiolib: fix a doc warning
gpio: tegra186: Add Tegra194 pin ranges for GG.0 and GG.1
gpio: tegra186: Add support for pin ranges
gpio: Support GPIO controllers without pin-ranges
ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro
gpio: brcmstb: support gpio-line-names property
tools: gpio: Fix typo in gpio-utils
tools: gpio-hammer: Apply scripts/Lindent and retain good changes
gpiolib: gpio_name_to_desc: factor out !name check
...
|
||
|
Linus Torvalds
|
1e396a5d17 |
threads-v5.7
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXoSOqgAKCRCRxhvAZXjc omfTAQDlbSZkzNfEWcxi+WE9tg+Y5tHR7hjdsK99Mb3vhAh5GwD+LT0EOI3WKoNY MQUp2RaR7YwWL/pktd9N1EX8qa5IPg4= =zvBX -----END PGP SIGNATURE----- Merge tag 'threads-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull thread updates from Christian Brauner: "The main change for this cycle was the extension for clone3() to support spawning processes directly into cgroups via CLONE_INTO_CGROUP (commit |
||
Michael Ellerman
|
6ba4a2d359 |
selftests/powerpc: Always build the tm-poison test 64-bit
The tm-poison test includes inline asm which is 64-bit only, so the
test must be built 64-bit in order to work.
Otherwise it fails, eg:
# file tm-poison
tm-poison: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV) ...
# ./tm-poison
test: tm_poison_test
Unknown value 0x1fff71150 leaked into f31!
Unknown value 0x1fff710c0 leaked into vr31!
failure: tm_poison_test
Fixes:
|
||
Ingo Molnar
|
7dc41b9b99 |
perf/urgent fixes and improvements:
perf python:
Arnaldo Carvalho de Melo:
- Fix clang detection to strip out options passed in $CC.
build:
He Zhe:
- Normalize gcc parameter when generating arch errno table, fixing
the build by removing options from $(CC).
Sam Lunt:
- Support Python 3.8+ in Makefile.
perf report/top:
Arnaldo Carvalho de Melo:
- Fix title line formatting.
perf script:
Andreas Gerstmayr:
- Fix SEGFAULT when using DWARF mode.
- Fix invalid read of directory entry after closedir(), found with valgrind.
Hagen Paul Pfeifer:
- Introduce --deltatime option.
Stephane Eranian:
- Allow --symbol to accept hexadecimal addresses.
Ian Rogers:
- Add -S/--symbols documentation
Namhyung Kim:
- Add --show-cgroup-events option.
perf python:
Arnaldo Carvalho de Melo:
- Include rwsem.c in the python binding, needed by the cgroups improvements.
build-test:
Arnaldo Carvalho de Melo:
- Honour JOBS to override detection of number of cores
perf top:
Jin Yao:
- Support --group-sort-idx to change the sort order
- perf top: Support hotkey to change sort order
perf pmu-events x86:
Jin Yao:
- Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric
perf symbols arm64:
Kemeng Shi:
- Fix arm64 gap between kernel start and module end
kernel perf subsystem:
Namhyung Kim:
- Add PERF_RECORD_CGROUP event and Add PERF_SAMPLE_CGROUP feature,
to allow cgroup tracking, saving a link between cgroup path and
its id number.
perf cgroup:
Namhyung Kim:
- Maintain cgroup hierarchy.
perf report:
Namhyung Kim:
- Add 'cgroup' sort key.
perf record:
Namhyung Kim:
- Support synthesizing cgroup events for pre-existing cgroups.
- Add --all-cgroups option
Documentation:
Tony Jones:
- Update docs regarding kernel/user space unwinding.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXodMtwAKCRCyPKLppCJ+
J+leAP0Ws0dGzMSIwcMVc7zvK1IsYOTlZ8lYXJePxD+Po/YPdAEA6Squf4gwZ2wm
b9R7w50dlCkMJ9LaueCeZZjh/4asFwQ=
=auOb
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.7-20200403' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes and improvements from Arnaldo Carvalho de Melo:
perf python:
Arnaldo Carvalho de Melo:
- Fix clang detection to strip out options passed in $CC.
build:
He Zhe:
- Normalize gcc parameter when generating arch errno table, fixing
the build by removing options from $(CC).
Sam Lunt:
- Support Python 3.8+ in Makefile.
perf report/top:
Arnaldo Carvalho de Melo:
- Fix title line formatting.
perf script:
Andreas Gerstmayr:
- Fix SEGFAULT when using DWARF mode.
- Fix invalid read of directory entry after closedir(), found with valgrind.
Hagen Paul Pfeifer:
- Introduce --deltatime option.
Stephane Eranian:
- Allow --symbol to accept hexadecimal addresses.
Ian Rogers:
- Add -S/--symbols documentation
Namhyung Kim:
- Add --show-cgroup-events option.
perf python:
Arnaldo Carvalho de Melo:
- Include rwsem.c in the python binding, needed by the cgroups improvements.
build-test:
Arnaldo Carvalho de Melo:
- Honour JOBS to override detection of number of cores
perf top:
Jin Yao:
- Support --group-sort-idx to change the sort order
- perf top: Support hotkey to change sort order
perf pmu-events x86:
Jin Yao:
- Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric
perf symbols arm64:
Kemeng Shi:
- Fix arm64 gap between kernel start and module end
kernel perf subsystem:
Namhyung Kim:
- Add PERF_RECORD_CGROUP event and Add PERF_SAMPLE_CGROUP feature,
to allow cgroup tracking, saving a link between cgroup path and
its id number.
perf cgroup:
Namhyung Kim:
- Maintain cgroup hierarchy.
perf report:
Namhyung Kim:
- Add 'cgroup' sort key.
perf record:
Namhyung Kim:
- Support synthesizing cgroup events for pre-existing cgroups.
- Add --all-cgroups option
Documentation:
Tony Jones:
- Update docs regarding kernel/user space unwinding.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
|
Linus Torvalds
|
86f26a77cb |
pci-v5.7-changes
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl6GTQMUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vy3PhAAmqpYBRobOsG8QbmKDjoJEFtkqdvD
z6+4zf/R+hF11RyXjMDwihIe8d+tkQ4eAaYu6Oh5PrTyanz0G0PgeCrivZeytULk
thqQIWzDQMVA5vN/2/Vy8s5s+3HzP8z/MZOFScJ7+xA1MndXptPRTNmFUbjx+GAv
x8/pTp0u9AF6m7itX65DxXvwkzjWamt+Ar4Yx2IcuKAU/M5RtfuZO3PpDnqn7/wk
JFlkRoYeFB6qNnnkPdeyPHl9dALhuhzgdTyklQEnKVW3nf3xThYDhcEwdh6kBQgl
0dH8lL5LXy7PKGN8RES4wB0Vqndw/HlsCF5O4wkkfItbnbJxGJtS139e5973m0ud
sgWvF4yJAT2jCKhIeNz34sePQJMyWALhv0XzZCsJ0YeGHsrV1jrHELkwUT1+eIsT
3UV0iZ6aL06zQJDyKUbbIcQzEQ/wwBC+x9VgsyL54K1quCQZ1N1Nl/dvrb4cRG9m
m9EhJK/brDf4c0uFlOmMTSxV1t5J+z6ZSQnh1ShD/o5yBsxqN6q5brDT6LEs+jbM
LsIkA18jJOd4OyiDs98YiFKvIfFQbQ0LEBQpJwhF0snvfBFMMbUYN/T/NYneWON/
F0TpkFoP7PXDuq55iNaLdnObfzrpC9kdzUyWvePUvjxIl55bkf+/qtUny+H48t4L
dNggvW052d7BHes=
=deWu
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg)
- Add more 32 GT/s link speed decoding and improve the implementation
(Yicong Yang)
Resource management:
- Add support for sizing programmable host bridge apertures and fix a
related alpha Nautilus regression (Ivan Kokshaysky)
Interrupts:
- Add boot interrupt quirk mechanism for Xeon chipsets and document
boot interrupts (Sean V Kelley)
PCIe native device hotplug:
- When possible, disable in-band presence detect and use PDS
(Alexandru Gagniuc)
- Add DMI table for devices that don't use in-band presence detection
but don't advertise that correctly (Stuart Hayes)
- Fix hang when powering slots up/down via sysfs (Lukas Wunner)
- Fix an MSI interrupt race (Stuart Hayes)
Virtualization:
- Add ACS quirks for Zhaoxin devices (Raymond Pang)
Error handling:
- Add Error Disconnect Recover (EDR) support so firmware can report
devices disconnected via DPC and we can try to recover (Kuppuswamy
Sathyanarayanan)
Peer-to-peer DMA:
- Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew
Maier)
ASPM:
- Reduce severity of common clock config message (Chris Packham)
- Clear the correct bits when enabling L1 substates, so we don't go
to the wrong state (Yicong Yang)
Endpoint framework:
- Replace EPF linkup ops with notifier call chain and improve locking
(Kishon Vijay Abraham I)
- Fix concurrent memory allocation in OB address region (Kishon Vijay
Abraham I)
- Move PF function number assignment to EPC core to support multiple
function creation methods (Kishon Vijay Abraham I)
- Fix issue with clearing configfs "start" entry (Kunihiko Hayashi)
- Fix issue with endpoint MSI-X ignoring BAR Indicator and Table
Offset (Kishon Vijay Abraham I)
- Add support for testing DMA transfers (Kishon Vijay Abraham I)
- Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I)
- Add support for tests to clear IRQ (Kishon Vijay Abraham I)
- Add common DT schema for endpoint controllers (Kishon Vijay Abraham I)
Amlogic Meson PCIe controller driver:
- Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi
Pommarel)
- Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi
Pommarel)
Cadence PCIe controller driver:
- Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay
Abraham I)
Intel VMD host bridge driver:
- Add two VMD Device IDs that require bus restriction mode (Sushma
Kalakota)
Mobiveil PCIe controller driver:
- Refactor and modularize mobiveil driver (Hou Zhiqiang)
- Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang)
Microsoft Hyper-V host bridge driver:
- Add support for Hyper-V PCI protocol version 1.3 and
PCI_BUS_RELATIONS2 (Long Li)
- Refactor to prepare for virtual PCI on non-x86 architectures (Boqun
Feng)
- Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Use pci_parse_request_of_pci_ranges() (Rob Herring)
- Add support for endpoint mode and related DT updates (Vidya Sagar)
- Reduce -EPROBE_DEFER error message log level (Thierry Reding)
Qualcomm PCIe controller driver:
- Restrict class fixup to specific Qualcomm devices (Bjorn Andersson)
Synopsys DesignWare PCIe controller driver:
- Refactor core initialization code for endpoint mode (Vidya Sagar)
- Fix endpoint MSI-X to use correct table address (Kishon Vijay
Abraham I)
TI DRA7xx PCIe controller driver:
- Fix MSI IRQ handling (Vignesh Raghavendra)
TI Keystone PCIe controller driver:
- Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I)
Miscellaneous:
- Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng
Feng)
- Use ioremap(), not phys_to_virt(), for platform ROM to fix video
ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)"
* tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits)
misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS
PCI: tegra: Print -EPROBE_DEFER error message at debug level
misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq()
misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
tools: PCI: Add 'e' to clear IRQ
misc: pci_endpoint_test: Add ioctl to clear IRQ
misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt
PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address
PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments
misc: pci_endpoint_test: Add support to get DMA option from userspace
tools: PCI: Add 'd' command line option to support DMA
misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation
PCI: endpoint: functions/pci-epf-test: Print throughput information
PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data
PCI: pciehp: Fix MSI interrupt race
PCI: pciehp: Fix indefinite wait on sysfs requests
PCI: endpoint: Fix clearing start entry in configfs
PCI: tegra: Add support for PCIe endpoint mode in Tegra194
PCI: sysfs: Revert "rescan" file renames
...
|
||
|
Linus Torvalds
|
0ad5b053d4 |
Char/Misc driver patches for 5.7-rc1
Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodfvA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynzCQCfROhar3E8EhYEqSOP6xq6uhX9uegAnRgGY2rs rN4JJpOcTddvZcVlD+vo =ocWk -----END PGP SIGNATURE----- Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ... |
||
|
Linus Torvalds
|
ff2ae607c6 |
SPDX patches for 5.7-rc1.
Here are 3 SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All 3 of these have been in linux-next for a while, with no reported issues other than the merge conflict. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm m5AuCzO3Azt9KBi7NL+L =2Lm5 -----END PGP SIGNATURE----- Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments |
||
|
Linus Torvalds
|
d883600523 |
Merge branch 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo: - Christian extended clone3 so that processes can be spawned into cgroups directly. This is not only neat in terms of semantics but also avoids grabbing the global cgroup_threadgroup_rwsem for migration. - Daniel added !root xattr support to cgroupfs. Userland already uses xattrs on cgroupfs for bookkeeping. This will allow delegated cgroups to support such usages. - Prateek tried to make cpuset hotplug handling synchronous but that led to possible deadlock scenarios. Reverted. - Other minor changes including release_agent_path handling cleanup. * 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: docs: cgroup-v1: Document the cpuset_v2_mode mount option Revert "cpuset: Make cpuset hotplug synchronous" cgroupfs: Support user xattrs kernfs: Add option to enable user xattrs kernfs: Add removed_size out param for simple_xattr_set kernfs: kvmalloc xattr value instead of kmalloc cgroup: Restructure release_agent_path handling selftests/cgroup: add tests for cloning into cgroups clone3: allow spawning processes into cgroups cgroup: add cgroup_may_write() helper cgroup: refactor fork helpers cgroup: add cgroup_get_from_file() helper cgroup: unify attach permission checking cpuset: Make cpuset hotplug synchronous cgroup.c: Use built-in RCU list checking kselftest/cgroup: add cgroup destruction test cgroup: Clean up css_set task traversal |
||
Arnaldo Carvalho de Melo
|
9ff76cea4e |
perf python: Fix clang detection to strip out options passed in $CC
The clang check in the python setup.py file expected $CC to be just the
name of the compiler, not the compiler + options, i.e. all options were
expected to be passed in $CFLAGS, this ends up making it fail in systems
where CC is set to, e.g.:
"aarch64-linaro-linux-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot"
Like this:
$ python3
>>> from subprocess import Popen
>>> a = Popen(["aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot", "-v"])
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python3.6/subprocess.py", line 729, in __init__
restore_signals, start_new_session)
File "/usr/lib/python3.6/subprocess.py", line 1364, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot': 'aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot'
>>>
Make it more robust, covering this case, by passing cc.split()[0] as the
first arg to popen().
Fixes:
|
||
Sam Lunt
|
b9c9ce4e59 |
perf tools: Support Python 3.8+ in Makefile
Python 3.8 changed the output of 'python-config --ldflags' to no longer include the '-lpythonX.Y' flag (this apparently fixed an issue loading modules with a statically linked Python executable). The libpython feature check in linux/build/feature fails if the Python library is not included in FEATURE_CHECK_LDFLAGS-libpython variable. This adds a check in the Makefile to determine if PYTHON_CONFIG accepts the '--embed' flag and passes that flag alongside '--ldflags' if so. tools/perf is the only place the libpython feature check is used. Signed-off-by: Sam Lunt <samuel.j.lunt@gmail.com> Tested-by: He Zhe <zhe.he@windriver.com> Link: http://lore.kernel.org/lkml/c56be2e1-8111-9dfe-8298-f7d0f9ab7431@windriver.com Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: trivial@kernel.org Cc: stable@kernel.org Link: http://lore.kernel.org/lkml/20200131181123.tmamivhq4b7uqasr@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Andreas Gerstmayr
|
27486a85cb |
perf script: Fix invalid read of directory entry after closedir()
closedir(lang_dir) frees the memory of script_dirent->d_name, which gets accessed in the next line in a call to scnprintf(). Valgrind report: Invalid read of size 1 ==413557== at 0x483CBE6: strlen (vg_replace_strmem.c:461) ==413557== by 0x4DD45FD: __vfprintf_internal (vfprintf-internal.c:1688) ==413557== by 0x4DE6679: __vsnprintf_internal (vsnprintf.c:114) ==413557== by 0x53A037: vsnprintf (stdio2.h:80) ==413557== by 0x53A037: scnprintf (vsprintf.c:21) ==413557== by 0x435202: get_script_path (builtin-script.c:3223) ==413557== Address 0x52e7313 is 1,139 bytes inside a block of size 32,816 free'd ==413557== at 0x483AA0C: free (vg_replace_malloc.c:540) ==413557== by 0x4E303C0: closedir (closedir.c:50) ==413557== by 0x4351DC: get_script_path (builtin-script.c:3222) Signed-off-by: Andreas Gerstmayr <agerstmayr@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200402124337.419456-1-agerstmayr@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Andreas Gerstmayr
|
1a4025f060 |
perf script report: Fix SEGFAULT when using DWARF mode
When running perf script report with a Python script and a callgraph in DWARF mode, intr_regs->regs can be 0 and therefore crashing the regs_map function. Added a check for this condition (same check as in builtin-script.c:595). Signed-off-by: Andreas Gerstmayr <agerstmayr@redhat.com> Tested-by: Kim Phillips <kim.phillips@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200402125417.422232-1-agerstmayr@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Ian Rogers
|
628d736d91 |
perf script: add -S/--symbols documentation
Capture both that this option exists and that symbols can be hexadecimal addresses. Signed-off-by: Ian Rogers <irogers@google.com> Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200402174130.140319-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Jin Yao
|
8ed1faf015 |
perf pmu-events x86: Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric
The kernel utilization metric does multiplexing currently and is somewhat
unreliable. The problem is that it uses two instances of the fixed counter,
and the kernel has to multipleplex which causes errors. So should use
CPU_CLK_UNHALTED.THREAD instead.
Before:
# perf stat -M Kernel_Utilization -- sleep 1
Performance counter stats for 'sleep 1':
1,419,425 cpu_clk_unhalted.ref_tsc:k
<not counted> cpu_clk_unhalted.ref_tsc (0.00%)
After:
# perf stat -M Kernel_Utilization -- sleep 1
Performance counter stats for 'sleep 1':
746,688 cpu_clk_unhalted.thread:k # 0.7 Kernel_Utilization
1,088,348 cpu_clk_unhalted.thread
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200309013125.7559-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Adrian Hunter
|
47327f5667 |
perf events parser: Add missing Intel CPU events to parser
perf list expects CPU events to be parseable by name, e.g.
# perf list | grep el-capacity-read
el-capacity-read OR cpu/el-capacity-read/ [Kernel PMU event]
But the event parser does not recognize them that way, e.g.
# perf test -v "Parse event"
<SNIP>
running test 54 'cycles//u'
running test 55 'cycles:k'
running test 0 'cpu/config=10,config1,config2=3,period=1000/u'
running test 1 'cpu/config=1,name=krava/u,cpu/config=2/u'
running test 2 'cpu/config=1,call-graph=fp,time,period=100000/,cpu/config=2,call-graph=no,time=0,period=2000/'
running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2/ukp'
-> cpu/event=0,umask=0x11/
-> cpu/event=0,umask=0x13/
-> cpu/event=0x54,umask=0x1/
failed to parse event 'el-capacity-read:u,cpu/event=el-capacity-read/u', err 1, str 'parser error'
event syntax error: 'el-capacity-read:u,cpu/event=el-capacity-read/u'
\___ parser error test child finished with 1
---- end ----
Parse event definition strings: FAILED!
This happens because the parser splits names by '-' in order to deal
with cache events. For example 'L1-dcache' is a token in
parse-events.l which is matched to 'L1-dcache-load-miss' by the
following rule:
PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT '-' PE_NAME_CACHE_OP_RESULT opt_event_config
And so there is special handling for 2-part PMU names i.e.
PE_PMU_EVENT_PRE '-' PE_PMU_EVENT_SUF sep_dc
but no handling for 3-part names, which are instead added as tokens e.g.
topdown-[a-z-]+
While it would be possible to add a rule for 3-part names, that would
not work if the first parts were also a valid PMU name e.g.
'el-capacity-read' would be matched to 'el-capacity' before the parser
reached the 3rd part.
The parser would need significant change to rationalize all this, so
instead fix for now by adding missing Intel CPU events with 3-part names
to the event parser as tokens.
Missing events were found by using:
grep -r EVENT_ATTR_STR arch/x86/events/intel/core.c
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: http://lore.kernel.org/lkml/90c7ae07-c568-b6d3-f9c4-d0c1528a0610@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Stephane Eranian
|
d2bedb7863 |
perf script: Allow --symbol to accept hexadecimal addresses
This patch extends the perf script --symbols option to filter on hexadecimal addresses in addition to symbol names. This makes it easier to handle cases where symbols are aliased. With this patch, it is possible to mix and match symbols and hexadecimal addresses using the --symbols option. $ perf script --symbols=noploop,0x4007a0 Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200325220802.15039-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
376c3c22e2 |
perf report/top TUI: Fix title line formatting
In |
||
|
Jin Yao
|
2605af0f32 |
perf top: Support hotkey to change sort order
It would be nice if we can use a hotkey in perf top browser to select a
event for sorting.
For example:
perf top --group -e cycles,instructions,cache-misses
Samples
Overhead Shared Object Symbol
40.03% 45.71% 0.03% div [.] main
20.46% 14.67% 0.21% libc-2.27.so [.] __random_r
20.01% 19.54% 0.02% libc-2.27.so [.] __random
9.68% 10.68% 0.00% div [.] compute_flag
4.32% 4.70% 0.00% libc-2.27.so [.] rand
3.84% 3.43% 0.00% div [.] rand@plt
0.05% 0.05% 2.33% libc-2.27.so [.] __strcmp_sse2_unaligned
0.04% 0.08% 2.43% perf [.] perf_hpp__is_dynamic_en
0.04% 0.02% 6.64% perf [.] rb_next
0.04% 0.01% 3.87% perf [.] dso__find_symbol
0.04% 0.04% 1.77% perf [.] sort__dso_cmp
When user press hotkey '2' (event index, starting from 0), it indicates
to sort output by the third event in group (cache-misses).
Samples
Overhead Shared Object Symbol
4.07% 1.28% 6.68% perf [.] rb_next
3.57% 3.98% 4.11% perf [.] __hists__insert_output
3.67% 11.24% 3.60% perf [.] perf_hpp__is_dynamic_e
3.67% 3.20% 3.20% perf [.] hpp__sort_overhead
0.81% 0.06% 3.01% perf [.] dso__find_symbol
1.62% 5.47% 2.51% perf [.] hists__match
2.70% 1.86% 2.47% libc-2.27.so [.] _int_malloc
0.19% 0.00% 2.29% [kernel] [k] copy_page
0.41% 0.32% 1.98% perf [.] hists__decay_entries
1.84% 3.67% 1.68% perf [.] sort__dso_cmp
0.16% 0.00% 1.63% [kernel] [k] clear_page_erms
Now the output is sorted by cache-misses.
v2:
---
Zero the history if hotkey is pressed.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200324220711.6025-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Jin Yao
|
df7deb2cce |
perf top: Support --group-sort-idx to change the sort order
'perf report' supports the option --group-sort-idx, which sorts the output by the event at the index n in event group. For example: perf record -e cycles,instructions,cache-misses perf report --group --group-sort-idx 2 --stdio The perf-report output is sorted by cache-misses. This patch supports --group-sort-idx in perf-top. For example: perf top --group -e cycles,instructions,cache-misses --group-sort-idx 2 The perf-top output is sorted by cache-misses. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200324220711.6025-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Kemeng Shi
|
78886f3ed3 |
perf symbols: Fix arm64 gap between kernel start and module end
During execution of command 'perf report' in my arm64 virtual machine,
this error message is showed:
failed to process sample
__symbol__inc_addr_samples(860): ENOMEM! sym->name=__this_module,
start=0x1477100, addr=0x147dbd8, end=0x80002000, func: 0
The error is caused with path:
cmd_report
__cmd_report
perf_session__process_events
__perf_session__process_events
ordered_events__flush
__ordered_events__flush
oe->deliver (ordered_events__deliver_event)
perf_session__deliver_event
machines__deliver_event
perf_evlist__deliver_sample
tool->sample (process_sample_event)
hist_entry_iter__add
iter->add_entry_cb(hist_iter__report_callback)
hist_entry__inc_addr_samples
symbol__inc_addr_samples
__symbol__inc_addr_samples
h = annotated_source__histogram(src, evidx) (NULL)
annotated_source__histogram failed is caused with path:
...
hist_entry__inc_addr_samples
symbol__inc_addr_samples
symbol__hists
annotated_source__alloc_histograms
src->histograms = calloc(nr_hists, sizeof_sym_hist) (failed)
Calloc failed as the symbol__size(sym) is too huge. As show in error
message: start=0x1477100, end=0x80002000, size of symbol is about 2G.
This is the same problem as 'perf annotate: Fix s390 gap between kernel
end and module start (
|
||
|
Arnaldo Carvalho de Melo
|
7b1642f2fc |
perf build-test: Honour JOBS to override detection of number of cores
When one does: $ make -C tools/perf build-test The makefile in tools/perf/tests/ will, just like the main one, detect how many cores are in the system and use it with -j. Sometimes we may need to override that, for instance, when using icecream or distcc to use multiple machines in the build process, then we need to, as with the main makefile, use: $ make JOBS=N -C tools/perf build-test Fix the tests makefile to honour that. Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200330130301.GA31702@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Namhyung Kim
|
160d4af97b |
perf script: Add --show-cgroup-events option
The --show-cgroup-events option is to print CGROUP events in the
output like others.
Committer testing:
[root@seventh ~]# perf record --all-cgroups --namespaces /wb/cgtest
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.039 MB perf.data (487 samples) ]
[root@seventh ~]# perf script --show-cgroup-events | grep PERF_RECORD_CGROUP -B2 -A2
swapper 0 0.000000: PERF_RECORD_CGROUP cgroup: 1 /
perf 12145 11200.440730: 1 cycles: ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
perf 12145 11200.440733: 1 cycles: ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
--
cgtest 12145 11200.440739: 193472 cycles: ffffffffb90f6fbc commit_creds+0x1fc (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
cgtest 12145 11200.440790: 2691608 cycles: 7fa2cb43019b _dl_sysdep_start+0x7cb (/usr/lib64/ld-2.29.so)
cgtest 12145 11200.440962: PERF_RECORD_CGROUP cgroup: 83 /sub
cgtest 12147 11200.441054: 1 cycles: ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
cgtest 12147 11200.441057: 1 cycles: ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
--
cgtest 12148 11200.441103: 10227 cycles: ffffffffb9a0153d end_repeat_nmi+0x48 (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
cgtest 12148 11200.441106: 273295 cycles: ffffffffb99ecbc7 copy_page+0x7 (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
cgtest 12147 11200.441133: PERF_RECORD_CGROUP cgroup: 88 /sub/cgrp1
cgtest 12147 11200.441143: 2788845 cycles: ffffffffb94676c2 security_genfs_sid+0x102 (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
cgtest 12148 11200.441162: PERF_RECORD_CGROUP cgroup: 93 /sub/cgrp2
cgtest 12148 11200.441182: 2669546 cycles: 401020 _init+0x20 (/wb/cgtest)
cgtest 12149 11200.441247: 1 cycles: ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
[root@seventh ~]#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Namhyung Kim
|
f382842fa0 |
perf top: Add --all-cgroups option
The --all-cgroups option is to enable cgroup profiling support. It tells kernel to record CGROUP events in the ring buffer so that 'perf top' can identify task/cgroup association later. Committer testing: Use: # perf top --all-cgroups -s cgroup_id,cgroup,pid Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200325124536.2800725-9-namhyung@kernel.org Link: http://lore.kernel.org/lkml/20200402015249.3800462-1-namhyung@kernel.org [ Extracted the HAVE_FILE_HANDLE from the followup patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
8fb4b67939 |
perf record: Add --all-cgroups option
The --all-cgroups option is to enable cgroup profiling support. It
tells kernel to record CGROUP events in the ring buffer so that perf
report can identify task/cgroup association later.
[root@seventh ~]# perf record --all-cgroups --namespaces /wb/cgtest
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.042 MB perf.data (558 samples) ]
[root@seventh ~]# perf report --stdio -s cgroup_id,cgroup,pid
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 558 of event 'cycles'
# Event count (approx.): 458017341
#
# Overhead cgroup id (dev/inode) Cgroup Pid:Command
# ........ ..................... .......... ...............
#
33.15% 4/0xeffffffb /sub 9615:looper0
32.83% 4/0xf00002f5 /sub/cgrp2 9620:looper2
32.79% 4/0xf00002f4 /sub/cgrp1 9619:looper1
0.35% 4/0xf00002f5 /sub/cgrp2 9618:cgtest
0.34% 4/0xf00002f4 /sub/cgrp1 9617:cgtest
0.32% 4/0xeffffffb / 9615:looper0
0.11% 4/0xeffffffb /sub 9617:cgtest
0.10% 4/0xeffffffb /sub 9618:cgtest
#
# (Tip: Sample related events with: perf record -e '{cycles,instructions}:S')
#
[root@seventh ~]#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-8-namhyung@kernel.org
Link: http://lore.kernel.org/lkml/20200402015249.3800462-1-namhyung@kernel.org
[ Extracted the HAVE_FILE_HANDLE from the followup patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Namhyung Kim
|
ab64069f1a |
perf record: Support synthesizing cgroup events
Synthesize cgroup events by iterating cgroup filesystem directories. The cgroup event only saves the portion of cgroup path after the mount point and the cgroup id (which actually is a file handle). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200325124536.2800725-7-namhyung@kernel.org Link: http://lore.kernel.org/lkml/20200402015249.3800462-1-namhyung@kernel.org [ Extracted the HAVE_FILE_HANDLE from the followup patch, added missing __maybe_unused ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
b629f3e9d0 |
perf report: Add 'cgroup' sort key
The cgroup sort key is to show cgroup membership of each task.
Currently it shows full path in the cgroupfs (not relative to the root
of cgroup namespace) since it'd be more intuitive IMHO. Otherwise root
cgroup in different namespaces will all show same name - "/".
The cgroup sort key should come before cgroup_id otherwise
sort_dimension__add() will match it to cgroup_id as it only matches with
the given substring.
For example it will look like following. Note that record patch adding
--all-cgroups patch will come later.
$ perf record -a --namespace --all-cgroups cgtest
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.208 MB perf.data (4090 samples) ]
$ perf report -s cgroup_id,cgroup,pid
...
# Overhead cgroup id (dev/inode) Cgroup Pid:Command
# ........ ..................... .......... ...............
#
93.96% 0/0x0 / 0:swapper
1.25% 3/0xeffffffb / 278:looper0
0.86% 3/0xf000015f /sub/cgrp1 280:cgtest
0.37% 3/0xf0000160 /sub/cgrp2 281:cgtest
0.34% 3/0xf0000163 /sub/cgrp3 282:cgtest
0.22% 3/0xeffffffb /sub 278:looper0
0.20% 3/0xeffffffb / 280:cgtest
0.15% 3/0xf0000163 /sub/cgrp3 285:looper3
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Namhyung Kim
|
d1277aa36b |
perf cgroup: Maintain cgroup hierarchy
Each cgroup is kept in the perf_env's cgroup_tree sorted by the cgroup id. Hist entries have cgroup id can compare it directly and later it can be used to find a group name using this tree. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200325124536.2800725-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
ba78c1c546 |
perf tools: Basic support for CGROUP event
Implement basic functionality to support cgroup tracking. Each cgroup can be identified by inode number which can be read from userspace too. The actual cgroup processing will come in the later patch. Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> [ fix perf test failure on sampling parsing ] Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200325124536.2800725-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |