Commit Graph

186 Commits

Author SHA1 Message Date
Christoph Hellwig
925c86a19b fs: add CONFIG_BUFFER_HEAD
Add a new config option that controls building the buffer_head code, and
select it from all file systems and stacking drivers that need it.

For the block device nodes and alternative iomap based buffered I/O path
is provided when buffer_head support is not enabled, and iomap needs a
a small tweak to define the IOMAP_F_BUFFER_HEAD flag to 0 to not call
into the buffer_head code when it doesn't exist.

Otherwise this is just Kconfig and ifdef changes.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230801172201.1923299-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-02 09:13:09 -06:00
Linus Torvalds
a0433f8cae for-6.5/block-2023-06-23
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmSV8dwQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpilGD/9Yys1oxIXJpRf00fzrylAlBthRxMjFQVWw
 zAut106hAQiBHvU8IkmGA3MvEFVHxtzwYhHI7IR8K3aZBIqscweCqmVI9JyogJw9
 U9Twnzel47VmuKdM94FeoN+hbj1fP8EWTjzmy67/zEEfFCdmHvNlMi3lSrGYIpFy
 39LxTB99Y4UarM5PtWbes37GYYljzMSWKuo4AfBkvq1eQa+sZ0Vq2xAABKq3UM7f
 apqhgHtkJooRePDP0eQp+kAyyVMgW2jIK+oIdJDxNF3CKTu2w40RzaYz6fp+jVSU
 H4R/xS59GW4/xql+VBJDh/qJg9K62DPPYjlW8BmSR8+IjvfFpsyH3/MacE50CD3P
 20fs/Mnj49H79fDrQEHJI53cOOb2EmUitbwLbvOcColNTPpt8loBtdQxjF2RMU8R
 Nyort9DJPFclYCxky1LYg1CNEC2Ln4Zy/jD47wPvqRmOQphOoVlV/hPnOEqvjaZC
 49Vn70W2DeE9cXvYI7ha+XIg6/oj+Gs3iusEbV08Ci7EAtXgI+ZUUsQ97K8UNiUh
 h2lqSJtuI7lBpYP9sf+BeCch5UCC+xGYyTdoM5f58lehWBBPtbs0g7S9RyRyOYxe
 n+yxEUo3dAGzJ/xsKAjinbZfeWIpr0b1TkAh4w3Cq/BKzRr9Bp8lBAxYuancbQ+Y
 1ADPteUOTA==
 =zP4Y
 -----END PGP SIGNATURE-----

Merge tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux

Pull block updates from Jens Axboe:

 - NVMe pull request via Keith:
      - Various cleanups all around (Irvin, Chaitanya, Christophe)
      - Better struct packing (Christophe JAILLET)
      - Reduce controller error logs for optional commands (Keith)
      - Support for >=64KiB block sizes (Daniel Gomez)
      - Fabrics fixes and code organization (Max, Chaitanya, Daniel
        Wagner)

 - bcache updates via Coly:
      - Fix a race at init time (Mingzhe Zou)
      - Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)

 - use page pinning in the block layer for dio (David)

 - convert old block dio code to page pinning (David, Christoph)

 - cleanups for pktcdvd (Andy)

 - cleanups for rnbd (Guoqing)

 - use the unchecked __bio_add_page() for the initial single page
   additions (Johannes)

 - fix overflows in the Amiga partition handling code (Michael)

 - improve mq-deadline zoned device support (Bart)

 - keep passthrough requests out of the IO schedulers (Christoph, Ming)

 - improve support for flush requests, making them less special to deal
   with (Christoph)

 - add bdev holder ops and shutdown methods (Christoph)

 - fix the name_to_dev_t() situation and use cases (Christoph)

 - decouple the block open flags from fmode_t (Christoph)

 - ublk updates and cleanups, including adding user copy support (Ming)

 - BFQ sanity checking (Bart)

 - convert brd from radix to xarray (Pankaj)

 - constify various structures (Thomas, Ivan)

 - more fine grained persistent reservation ioctl capability checks
   (Jingbo)

 - misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
   Jordy, Li, Min, Yu, Zhong, Waiman)

* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
  scsi/sg: don't grab scsi host module reference
  ext4: Fix warning in blkdev_put()
  block: don't return -EINVAL for not found names in devt_from_devname
  cdrom: Fix spectre-v1 gadget
  block: Improve kernel-doc headers
  blk-mq: don't insert passthrough request into sw queue
  bsg: make bsg_class a static const structure
  ublk: make ublk_chr_class a static const structure
  aoe: make aoe_class a static const structure
  block/rnbd: make all 'class' structures const
  block: fix the exclusive open mask in disk_scan_partitions
  block: add overflow checks for Amiga partition support
  block: change all __u32 annotations to __be32 in affs_hardblocks.h
  block: fix signed int overflow in Amiga partition support
  block: add capacity validation in bdev_add_partition()
  block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
  block: disallow Persistent Reservation on partitions
  reiserfs: fix blkdev_put() warning from release_journal_dev()
  block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
  block: document the holder argument to blkdev_get_by_path
  ...
2023-06-26 12:47:20 -07:00
Steve French
38c8a9a520 smb: move client and server files to common directory fs/smb
Move CIFS/SMB3 related client and server files (cifs.ko and ksmbd.ko
and helper modules) to new fs/smb subdirectory:

   fs/cifs --> fs/smb/client
   fs/ksmbd --> fs/smb/server
   fs/smbfs_common --> fs/smb/common

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-05-24 16:29:21 -05:00
Christoph Hellwig
bda2795a63 fs: remove the special !CONFIG_BLOCK def_blk_fops
def_blk_fops always returns -ENODEV, which dosn't match the return value
of a non-existing block device with CONFIG_BLOCK, which is -ENXIO.
Just remove the extra implementation and fall back to the default
no_open_fops that always returns -ENXIO.

Fixes: 9361401eb7 ("[PATCH] BLOCK: Make it possible to disable the block layer [try #6]")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230508144405.41792-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-05-19 19:48:53 -06:00
Linus Torvalds
342528ff00 This pull request contains the following changes for UML:
- Make stub data pages configurable
 - Make it harder to mix user and kernel code by accident
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAmRSslcWHHJpY2hhcmRA
 c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wVbGEADWL/4rcVNqaD/b9V3bUXDkNhpG
 81Jc9fXcx3OXV87GsxfadiQI05UaOhTAMWJlsdKUF0/IW5tSQSZc0QcDNxTs6aS1
 NDkWvjk8s8OpbqdmV0cNKFmaeginrH4AuASajvNleU0BxX4ziqw6BPadih+wGVGz
 iVEd/M5YH2yet33pvD7Wzh3KZOPlo2OOKBqXzE6Snc3yoOiIfN95U8Cl23nxzMI4
 F235LS5m+4+GWIMkYs6+hlWEa8SxSnsH/beQJxAybtetSHRxsDXOHlEpDI9olxYI
 +OFNqsFLDyhyjib2Snwt8HMES9VmMfUUwT7ZK1cChXN8Quix3lXAyz6rpocmdnL/
 X1tzqWb1bz+yqrVRjtN3AGbcav+sQp4UWXsoExVsiz3lzaXfrbPvRZFucH2+SStK
 Wadyy2v2rHZKNq9sDLUBf5GJ0C4LrBAyT15ADim2L5/K7pZyI7AKSPcdU0Xc8m5y
 kMswml7FLaI+gsuKOBl7jySaoNDiVZFvQjsxd1+hn5cBNOcyBSt2rSErDw3geJgn
 pFzVkLtklfxMpHMm+bwXONBZMrXOBPNgo0gSkVrCVzO68x6j/MaBGLFazSqOKxbc
 UcVULhiomjIae4AcTomzOQx7oM1Xs3XuPo0x2RgJ3gMlCCZKoDNuqDgB3ZmPP/gq
 cbbHHveXEx7aMOPz0A==
 =Qb+I
 -----END PGP SIGNATURE-----

Merge tag 'uml-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux

Pull uml updates from Richard Weinberger:

 - Make stub data pages configurable

 - Make it harder to mix user and kernel code by accident

* tag 'uml-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
  um: make stub data pages size tweakable
  um: prevent user code in modules
  um: further clean up user_syms
  um: don't export printf()
  um: hostfs: define our own API boundary
  um: add __weak for exported functions
2023-05-03 19:02:03 -07:00
Johannes Berg
8c6174503c um: hostfs: define our own API boundary
Instead of exporting the set of functions provided by
glibc that are needed for hostfs_user.c, just build that
into the kernel image whenever hostfs is built, and then
export _those_ functions cleanly, to be independent of
the libc implementation.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2023-04-20 23:04:40 +02:00
Kefeng Wang
e3184de9d4 fs: fix sysctls.c built
'obj-$(CONFIG_SYSCTL) += sysctls.o' must be moved after "obj-y :=",
or it won't be built as it is overwrited.

Note that there is nothing that is going to break by linking
sysctl.o later, we were just being way to cautious and patches
have been updated to reflect these considerations and sent for
stable as well with the whole "base" stuff needing to be linked
prior to child sysctl tables that use that directory. All of
the kernel sysctl APIs always share the same directory, and races
against using it should end up re-using the same single created
directory.

And so something we can do eventually is do away with all the base stuff.
For now it's fine, it's not creating an issue. It is just a bit pedantic
and careful.

Fixes: ab171b952c ("fs: move namespace sysctls and declare fs base directory")
Cc: stable@vger.kernel.org # v5.17
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[mcgrof: enhanced commit log for stable criteria and clarify base stuff ]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-04-13 12:39:44 -07:00
Linus Torvalds
553637f73c for-6.3/dio-2023-02-16
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmPueAQQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgplopEACo17a4Z2p2xCedA0NCqX2ggtsSIdYiluPm
 pgdBzIEsgwKo1XVLGRgGiC8VdMRuzO4Zh/NGn4iRF1a68wjgjnwGWY7r052TUoSr
 q1yya739BpffnkXjj15x86cwl+5rHv2RQkm15+2HqBgcruA63/ZgdKBtjj+EtVKs
 zYOlmgyfFbkn8AdULMGiDKP4lixV8gUelv6vWneBwNrj4iSLnuN1+8nJNsl4wxwg
 ImSpx63AzhUoeL6byc+fmiA8fZhDhSvwON2tCyyCmOjlFM/TLrsm5t1juWiDid1O
 UROkQwQtsmjSUq3ow5fRJfjbZ3HLa1uGQr95DYHy0OBRAteAhDY5Upv0DXNL0ZBh
 uNNg8AXtJbyc+pLHWnncyiTzi+3eWs7WiMn04/a5eDhFvcJ0PZjLIgRi5j1ezUS1
 bWqoPaAIxoMD83WoMxjnKvBpGeMzPHvNTijeZjkGOu0vOk8JhXqNmLTjNG9aLtzf
 1Nvp0o8AqtQAW7cgFazZSWtw4bPk/wZ7mW0zHtqLDHIzXkc7A/Uo0ftdv84G08aW
 pvakNz4aNLwSPf7hxgPP9SgS9CeHhxK8PS6uk3V788SI8qGiew11+EcTNGkQNmvw
 /ItCo93UaWD/7SZLObTLslmet7rFHzz6PXaXrMxrSvaeZMkgr7DWEy9XS+ueOtXO
 fS8QhJX11w==
 =IU45
 -----END PGP SIGNATURE-----

Merge tag 'for-6.3/dio-2023-02-16' of git://git.kernel.dk/linux

Pull legacy dio update from Jens Axboe:
 "We only have a few file systems that use the old dio code, make them
  select it rather than build it unconditionally"

* tag 'for-6.3/dio-2023-02-16' of git://git.kernel.dk/linux:
  fs: build the legacy direct I/O code conditionally
  fs: move sb_init_dio_done_wq out of direct-io.c
2023-02-20 14:10:36 -08:00
Christoph Hellwig
9636e650e1 fs: build the legacy direct I/O code conditionally
Add a new LEGACY_DIRECT_IO config symbol that is only selected by the
file systems that still use the legacy blockdev_direct_IO code, so that
kernels without support for those file systems don't need to build the
code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230125065839.191256-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-26 10:30:56 -07:00
Christian Brauner
3707d84c13
fs: move mnt_idmap
Now that we converted everything to just rely on struct mnt_idmap move it all
into a separate file. This ensure that no code can poke around in struct
mnt_idmap without any dedicated helpers and makes it easier to extend it in the
future. Filesystems will now not be able to conflate mount and filesystem
idmappings as they are two distinct types and require distinct helpers that
cannot be used interchangeably. We are now also able to extend struct mnt_idmap
as we see fit.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:30 +01:00
Eric W. Biederman
987f20a9dc a.out: Remove the a.out implementation
In commit 19e8b701e2 ("a.out: Stop building a.out/osf1 support on
alpha and m68k") the last users of a.out were disabled.

As nothing has turned up to cause this change to be reverted, let's
remove the code implementing a.out support as well.

There may be userspace users of the uapi bits left so the uapi
headers have been left untouched.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> # arm defconfigs
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/871qrx3hq3.fsf@email.froward.int.ebiederm.org
2022-09-27 07:11:02 -07:00
Jens Axboe
ed29b0b4fd io_uring: move to separate directory
In preparation for splitting io_uring up a bit, move it into its own
top level directory. It didn't really belong in fs/ anyway, as it's
not a file system only API.

This adds io_uring/ and moves the core files in there, and updates the
MAINTAINERS file for the new location.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-24 18:39:10 -06:00
Linus Torvalds
630c12862c Fix from Christoph Hellwig merging the CONFIG_UNICODE_UTF8_DATA into the
previous CONFIG_UNICODE.  It is -rc material since we don't want to
 expose the former symbol on 5.17.
 
 This has been living on linux-next for the past week.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8jAUPq50yNjPBCi4QEuZqsMcppQFAmH4lC0ACgkQQEuZqsMc
 ppRl1Q/+Lyba+DORs26C4p1GDS5ezHOCdbBUE8RFwWjIl+h5ckQ/8kndaXPRLorZ
 1S9E6h5RfqhekGKOhMTXyfzqcW8qMzUy4i3J2lmJpDwATqLt+4Wu/M2BBH2CaIIL
 EhhW8D+WduAEM/TFYihH9LJ0RopvIsqcy8qdu+oSBGfPAdxJ0f2+Yx0pNTRfqVmi
 8+Dry0nRhP12o9wXElpZ0/BYEZTlY+Zo6L/heT6/GKDLpz/YmZp18GAc/0TWb3LL
 ASujr+anU2LxSFskkyuMu+rbFE8eDshvHEuBZLxlD2o+tG6lAi4mNWZYc0/+jPMw
 8TdJ5MEX3IlljXLRKuYctoCdsFQKLxH5IN5wLkiLvM5fBpeb/sWqNolx8f2s/f9R
 TaUdjwiqFnML4VnlEH3hd3/hUUVbnE+xJo6g1iRGgJY3eecimvwl8P5H7k9Sn3OS
 4zh0bHT9pfg+vUR0BVnfdWi4OpPxSrdqCgFhHsmKaGMvTApm0qMKK1Cg4OPNtYwr
 d1RMqsqEBSJTHzr0nHoiWLhkIo8npRPy+LMK51D8j6wg0kOj4GGYerWm1MD9ZlbI
 rhPy7nDgdcH48Gk1m6o7dROZKCvkZK+/QDPelBgZHGcGB94lUugYVJQrlBjI+2+7
 Wx5oQLgQgeabeMtDZ/YNy5Dsre20vas2oLj5cs6uuoWNOcBO6Ew=
 =YVNN
 -----END PGP SIGNATURE-----

Merge tag 'unicode-for-next-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode

Pull unicode cleanup from Gabriel Krisman Bertazi:
 "A fix from Christoph Hellwig merging the CONFIG_UNICODE_UTF8_DATA into
  the previous CONFIG_UNICODE. It is -rc material since we don't want to
  expose the former symbol on 5.17.

  This has been living on linux-next for the past week"

* tag 'unicode-for-next-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
  unicode: clean up the Kconfig symbol confusion
2022-02-01 11:13:24 -08:00
Luis Chamberlain
ab171b952c fs: move namespace sysctls and declare fs base directory
This moves the namespace sysctls to its own file as part of the
kernel/sysctl.c spring cleaning

Since we have now removed all sysctls for "fs", we now have to declare
it on the filesystem code, we do that using the new helper, which
reduces boiler plate code.

We rename init_fs_shared_sysctls() to init_fs_sysctls() to reflect that
now fs/sysctls.c is taking on the burden of being the first to register
the base directory as well.

Lastly, since init code will load in the order in which we link it we
have to move the sysctl code to be linked in early, so that its early
init routine runs prior to other fs code.  This way, other filesystem
code can register their own sysctls using the helpers after this:

  * register_sysctl_init()
  * register_sysctl()

Link: https://lkml.kernel.org/r/20211129211943.640266-3-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22 08:33:36 +02:00
Luis Chamberlain
d1d8ac9edf fs: move shared sysctls to fs/sysctls.c
To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

So move sysctls which are shared between filesystems into a common file
outside of kernel/sysctl.c.

Link: https://lkml.kernel.org/r/20211129205548.605569-6-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22 08:33:36 +02:00
Christoph Hellwig
5298d4bfe8 unicode: clean up the Kconfig symbol confusion
Turn the CONFIG_UNICODE symbol into a tristate that generates some always
built in code and remove the confusing CONFIG_UNICODE_UTF8_DATA symbol.

Note that a lot of the IS_ENABLED() checks could be turned from cpp
statements into normal ifs, but this change is intended to be fairly
mechanic, so that should be cleaned up later.

Fixes: 2b3d047870 ("unicode: Add utf8-data module")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
2022-01-20 19:57:24 -05:00
Linus Torvalds
8d4a0b5d08 4 cifs/smb3 fixes, one for DFS reconnect, and one to begin creating common headers for server and client and the other two to rename the cifs_common directory to smbfs_common to be more consistent ie change use of the name cifs to smb which is more accurate
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmE84CsACgkQiiy9cAdy
 T1Gtnwv/ZR300RApOW6lxg5GuDxTVbOW9Iu+d8PGPTv+ai02LPIr3tfh+ClHqJYV
 IuOEIDckyWN32WGDaX9agLffYmQgYgan6sVL7LkebJvl5t6CdhPXOXM6Un2H32tM
 M0J73IhaIpFdNyNFCTfZ62J99vyUNLUKB2jSnhbpjUZTDoPELXVXAVEbk7bd9Dme
 AwKFbxO8cKkDOWk84BPMW4cxRZPT6NrkqsZiNkz++2U8WusL8mZNmLN8VwkMlzXo
 nEqhEHWPSXTV7M2lmY1UxyW2n0MEG4djNquZ2YCIunWwigD8iimBnJJnyirCI8YF
 3kpWXlfpwhUjQ1EoFAtQK+hexDpkyxB/1Kn0+xfmNpFqKqQ8eIwFQAkMh42VL9Gd
 Gi+uAM7mXk/IdWXwIm0B+8faM6FwhI3VXQvhV9dNi5yAXvv2cpsKv4VKugscFhdq
 alpQyoWZ8ivam7vADSNKYKYOchARz2xr1pLc+Cw+ggfu01wSEWWpehsUx5vJGMQ7
 npxdcZJ6
 =Y9tc
 -----END PGP SIGNATURE-----

Merge tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull smbfs updates from Steve French:
 "cifs/smb3 updates:

   - DFS reconnect fix

   - begin creating common headers for server and client

   - rename the cifs_common directory to smbfs_common to be more
     consistent ie change use of the name cifs to smb (smb3 or smbfs is
     more accurate, as the very old cifs dialect has long been
     superseded by smb3 dialects).

  In the future we can rename the fs/cifs directory to fs/smbfs.

  This does not include the set of multichannel fixes nor the two
  deferred close fixes (they are still being reviewed and tested)"

* tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: properly invalidate cached root handle when closing it
  cifs: move SMB FSCTL definitions to common code
  cifs: rename cifs_common to smbfs_common
  cifs: update FSCTL definitions
2021-09-12 10:10:21 -07:00
Linus Torvalds
c0f7e49fc4 block-5.15-2021-09-11
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmE8ueIQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpkSYD/9eaQ1Hxc+X+4eVb3A9Cpy36Qy/uY/hArnT
 kSUDtQitrRigqhStaD0MGpknWFnZE4cSojbYN0OoEWL7GC8idSZXx7KrVJpSHGbM
 XGVEflohvjDLNPkV99gmlzF2o6zPlWESApU1/HO2x+Ws1oKaYDAfFVf0CPGPe2C6
 MRerU5v3HSmTC0eFZxU246bwwX/phNuNDokndR27rrsjK0mLF5UoMKySeqy3INp5
 6mj3R+HNIW5j8eQk/HJPW7dgiKpWYneWV2Z90DuOLbcJ+wnx7s07wT1yRnOFUTsb
 p2ojVWmXtCJ1kRex6bK/eeIJC5TYvT3bNwsnIRmJHd9btHqhm2uKy77m3S1AuE7w
 K8bN581aXlr/3pUbFyYZDZQbYshUn25YP9OlyS9r4pklCh9C5KneL1b4xswWTDTB
 whvPZlkot3rGD8LHDpV5xVVzeaAcbSXanIRROjxHqQSRRTA9BjG3E4A2cDh8nmYD
 mRGEimfZcoojF2EQJYswPOQ24cZwpnihPpJO9NkOodRqfasn6XakAGg6SONFYyQ0
 Ewa6QzIOCebBgOVGbzMtpoDpnySE12ONmrDCbSEiYFJLXBMMiqgNON/Xaq0tmXHT
 lsDpyz3ytWAB9OZ3M0/9arZzlFf/E+FRqt4ExelmwxiutKRb1dIKQq8xip/YxdA+
 Y86kwUoAXQ==
 =1ajD
 -----END PGP SIGNATURE-----

Merge tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph:
     - fix nvmet command set reporting for passthrough controllers (Adam Manzanares)
     - update a MAINTAINERS email address (Chaitanya Kulkarni)
     - set QUEUE_FLAG_NOWAIT for nvme-multipth (me)
     - handle errors from add_disk() (Luis Chamberlain)
     - update the keep alive interval when kato is modified (Tatsuya Sasaki)
     - fix a buffer overrun in nvmet_subsys_attr_serial (Hannes Reinecke)
     - do not reset transport on data digest errors in nvme-tcp (Daniel Wagner)
     - only call synchronize_srcu when clearing current path (Daniel Wagner)
     - revalidate paths during rescan (Hannes Reinecke)

 - Split out the fs/block_dev into block/fops.c and block/bdev.c, which
   has been long overdue. Do this now before -rc1, to avoid annoying
   conflicts due to this (Christoph)

 - blk-throtl use-after-free fix (Li)

 - Improve plug depth for multi-device plugs, greatly increasing md
   resync performance (Song)

 - blkdev_show() locking fix (Tetsuo)

 - n64cart error check fix (Yang)

* tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
  n64cart: fix return value check in n64cart_probe()
  blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues
  block: move fs/block_dev.c to block/bdev.c
  block: split out operations on block special files
  blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()
  block: genhd: don't call blkdev_show() with major_names_lock held
  nvme: update MAINTAINERS email address
  nvme: add error handling support for add_disk()
  nvme: only call synchronize_srcu when clearing current path
  nvme: update keep alive interval when kato is modified
  nvme-tcp: Do not reset transport on data digest errors
  nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()
  nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_req
  nvmet: looks at the passthrough controller when initializing CAP
  nvme: move nvme_multi_css into nvme.h
  nvme-multipath: revalidate paths during rescan
  nvme-multipath: set QUEUE_FLAG_NOWAIT
2021-09-11 10:19:51 -07:00
Steve French
23e91d8b7c cifs: rename cifs_common to smbfs_common
As we move to common code between client and server, we have
been asked to make the names less confusing, and refer less
to "cifs" and more to words which include "smb" instead to
e.g. "smbfs" for the client (we already have "ksmbd" for the
kernel server, and "smbd" for the user space Samba daemon).
So to be more consistent in the naming of common code between
client and server and reduce the risk of merge conflicts as
more common code is added - rename "cifs_common" to
"smbfs_common" (in future releases we also will rename
the fs/cifs directory to fs/smbfs)

Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-09-08 23:59:26 -05:00
Christoph Hellwig
0dca4462ed block: move fs/block_dev.c to block/bdev.c
Move it together with the rest of the block layer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210907141303.1371844-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-07 08:39:40 -06:00
Linus Torvalds
f7464060f7 Merge git://github.com/Paragon-Software-Group/linux-ntfs3
Merge NTFSv3 filesystem from Konstantin Komarov:
 "This patch adds NTFS Read-Write driver to fs/ntfs3.

  Having decades of expertise in commercial file systems development and
  huge test coverage, we at Paragon Software GmbH want to make our
  contribution to the Open Source Community by providing implementation
  of NTFS Read-Write driver for the Linux Kernel.

  This is fully functional NTFS Read-Write driver. Current version works
  with NTFS (including v3.1) and normal/compressed/sparse files and
  supports journal replaying.

  We plan to support this version after the codebase once merged, and
  add new features and fix bugs. For example, full journaling support
  over JBD will be added in later updates"

Link: https://lore.kernel.org/lkml/20210729134943.778917-1-almaz.alexandrovich@paragon-software.com/
Link: https://lore.kernel.org/lkml/aa4aa155-b9b2-9099-b7a2-349d8d9d8fbd@paragon-software.com/

* git://github.com/Paragon-Software-Group/linux-ntfs3: (35 commits)
  fs/ntfs3: Change how module init/info messages are displayed
  fs/ntfs3: Remove GPL boilerplates from decompress lib files
  fs/ntfs3: Remove unnecessary condition checking from ntfs_file_read_iter
  fs/ntfs3: Fix integer overflow in ni_fiemap with fiemap_prep()
  fs/ntfs3: Restyle comments to better align with kernel-doc
  fs/ntfs3: Rework file operations
  fs/ntfs3: Remove fat ioctl's from ntfs3 driver for now
  fs/ntfs3: Restyle comments to better align with kernel-doc
  fs/ntfs3: Fix error handling in indx_insert_into_root()
  fs/ntfs3: Potential NULL dereference in hdr_find_split()
  fs/ntfs3: Fix error code in indx_add_allocate()
  fs/ntfs3: fix an error code in ntfs_get_acl_ex()
  fs/ntfs3: add checks for allocation failure
  fs/ntfs3: Use kcalloc/kmalloc_array over kzalloc/kmalloc
  fs/ntfs3: Do not use driver own alloc wrappers
  fs/ntfs3: Use kernel ALIGN macros over driver specific
  fs/ntfs3: Restyle comment block in ni_parse_reparse()
  fs/ntfs3: Remove unused including <linux/version.h>
  fs/ntfs3: Fix fall-through warnings for Clang
  fs/ntfs3: Fix one none utf8 char in source file
  ...
2021-09-04 11:15:50 -07:00
Linus Torvalds
9c849ce86e 11 cifs/smb3 client fixes, including some restructuring to allow disabling less secure algorithms, and 2 for stable
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmEsHj4ACgkQiiy9cAdy
 T1EIaAwAojBPoKmXwYGWRWtged9Z2U0gKa2yud+e02dqXemR0g7dqtyQThYru9VV
 v/lbQUi+WZT+uWpYPyXqcFjOXj2gZkSAcXxpXgDQfDecl3rXo+pUTzPXCqcbRxmu
 mpNrU5XrFtuX44dltPhg/BQvdnIyzmeeJ34BbdljQ+Ph9jy89hr7plXMmloyClCY
 f/BS1jalE9QMBgGDjmqaJ0eaz7oyhCjXF399NXE245OQsT6N+92D/mH7CYFMjKNp
 FQZ6rK1qeZaPuG5zFTYiS9ajzAdYxxGDa7gjo7+Totdr+IJJHW6aODjklngjZKHl
 ihTXLKpX/PxNZ45ILDLYcmzfDsj9hB63V9B0ARfDTI4VMc3f5yltxu0DxSTOn78v
 zRtfvyyw3scVnk9j2PhaJk/fofrv/RwdNPjlMX5QvuSG4u0E2DlKNX/YUpPgAZmH
 PU7XS/OPYcpo5Q4aPJ5cYgulsvnNiTlY0QYkM1eB0zv8koLPRFkvpMnShVEcahOq
 0Tw5Ekhp
 =d9f7
 -----END PGP SIGNATURE-----

Merge tag '5.15-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs client updates from Steve French:
 "Eleven cifs/smb3 client fixes:

   - mostly restructuring to allow disabling less secure algorithms
     (this will allow eventual removing rc4 and md4 from general use in
     the kernel)

   - four fixes, including two for stable

   - enable r/w support with fscache and cifs.ko

  I am working on a larger set of changes (the usual ... multichannel,
  auth and signing improvements), but wanted to get these in earlier to
  reduce chance of merge conflicts later in the merge window"

* tag '5.15-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Do not leak EDEADLK to dgetents64 for STATUS_USER_SESSION_DELETED
  cifs: add cifs_common directory to MAINTAINERS file
  cifs: cifs_md4 convert to SPDX identifier
  cifs: create a MD4 module and switch cifs.ko to use it
  cifs: fork arc4 and create a separate module for it for cifs and other users
  cifs: remove support for NTLM and weaker authentication algorithms
  cifs: enable fscache usage even for files opened as rw
  oid_registry: Add OIDs for missing Spnego auth mechanisms to Macs
  smb3: fix posix extensions mount option
  cifs: fix wrong release in sess_alloc_buffer() failed path
  CIFS: Fix a potencially linear read overflow
2021-08-31 09:22:37 -07:00
Linus Torvalds
e24c567b7e Initial merge of kernel smb3 file server, ksmbd
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmEr2okACgkQiiy9cAdy
 T1GucQwAoZykSKyy2AMbyYSap1Bm+CXX7YHoMlnqt0IF8ka9XKFj8nMBPgB8GKFE
 JLyikUxxeqgwbuOAkeyJu2knzX7QH18yTqz/YpytCx5waBgWdhLybn01xx/2n8fX
 ZA6E3Sb4aJKD7DO1Ia5t0u1lI4c2iZTIOwpoYgTX7VQi8VQYU/TN6aOIZR0Xgznw
 ffoxC4d9nlDjLzlTqY4oLnuIEQ0zHUBhndXxSy5Zh20cBUOLeWkOLUt1w1IkaR36
 f4k2UL3Y8njc9mKiOsQfFV/KE6YnPA0hZ48+h3xmWopjIJp5Wl7ublA/2c9rjxCf
 K5PwwgZ2bS5OpDvzSMPmquxGdQm9aPOlWwTbSL0NHe1ws/bD3Gx3/5/pjGJjyaYb
 i0YagAI8VaJPnPqBGdCfcwgV4NtshzSV2l9qfnkBG2hwkD4DldFt2qP4s/nQXPNt
 /bmEoTjuzrNhYbw3N2bbBQUK9CKhGywCbb2yAtSx5Me4FfxNANQ7lK1VLdfd6h4k
 o9esOBdF
 =yh1J
 -----END PGP SIGNATURE-----

Merge tag '5.15-rc-first-ksmbd-merge' of git://git.samba.org/ksmbd

Pull initial ksmbd implementation from Steve French:
 "Initial merge of kernel smb3 file server, ksmbd.

  The SMB family of protocols is the most widely deployed network
  filesystem protocol, the default on Windows and Macs (and even on many
  phones and tablets), with clients and servers on all major operating
  systems, but lacked a kernel server for Linux. For many cases the
  current userspace server choices were suboptimal either due to memory
  footprint, performance or difficulty integrating well with advanced
  Linux features.

  ksmbd is a new kernel module which implements the server-side of the
  SMB3 protocol. The target is to provide optimized performance, GPLv2
  SMB server, and better lease handling (distributed caching). The
  bigger goal is to add new features more rapidly (e.g. RDMA aka
  "smbdirect", and recent encryption and signing improvements to the
  protocol) which are easier to develop on a smaller, more tightly
  optimized kernel server than for example in Samba.

  The Samba project is much broader in scope (tools, security services,
  LDAP, Active Directory Domain Controller, and a cross platform file
  server for a wider variety of purposes) but the user space file server
  portion of Samba has proved hard to optimize for some Linux workloads,
  including for smaller devices.

  This is not meant to replace Samba, but rather be an extension to
  allow better optimizing for Linux, and will continue to integrate well
  with Samba user space tools and libraries where appropriate. Working
  with the Samba team we have already made sure that the configuration
  files and xattrs are in a compatible format between the kernel and
  user space server.

  Various types of functional and regression tests are regularly run
  against it. One example is the automated 'buildbot' regression tests
  which use the Linux client to test against ksmbd, e.g.

     http://smb3-test-rhel-75.southcentralus.cloudapp.azure.com/#/builders/8/builds/56

  but other test suites, including Samba's smbtorture functional test
  suite are also used regularly"

* tag '5.15-rc-first-ksmbd-merge' of git://git.samba.org/ksmbd: (219 commits)
  ksmbd: fix __write_overflow warning in ndr_read_string
  MAINTAINERS: ksmbd: add cifs_common directory to ksmbd entry
  MAINTAINERS: ksmbd: update my email address
  ksmbd: fix permission check issue on chown and chmod
  ksmbd: don't set FILE DELETE and FILE_DELETE_CHILD in access mask by default
  MAINTAINERS: add git adddress of ksmbd
  ksmbd: update SMB3 multi-channel support in ksmbd.rst
  ksmbd: smbd: fix kernel oops during server shutdown
  ksmbd: remove select FS_POSIX_ACL in Kconfig
  ksmbd: use proper errno instead of -1 in smb2_get_ksmbd_tcon()
  ksmbd: update the comment for smb2_get_ksmbd_tcon()
  ksmbd: change int data type to boolean
  ksmbd: Fix multi-protocol negotiation
  ksmbd: fix an oops in error handling in smb2_open()
  ksmbd: add ipv6_addr_v4mapped check to know if connection from client is ipv4
  ksmbd: fix missing error code in smb2_lock
  ksmbd: use channel signingkey for binding SMB2 session setup
  ksmbd: don't set RSS capable in FSCTL_QUERY_NETWORK_INTERFACE_INFO
  ksmbd: Return STATUS_OBJECT_PATH_NOT_FOUND if smb2_creat() returns ENOENT
  ksmbd: fix -Wstringop-truncation warnings
  ...
2021-08-31 09:11:55 -07:00
Ronnie Sahlberg
71c0286324 cifs: fork arc4 and create a separate module for it for cifs and other users
We can not drop ARC4 and basically destroy CIFS connectivity for
almost all CIFS users so create a new forked ARC4 module that CIFS and other
subsystems that have a hard dependency on ARC4 can use.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-08-25 15:47:57 -05:00
Konstantin Komarov
6e5be40d32
fs/ntfs3: Add NTFS3 in fs/Kconfig and fs/Makefile
This adds NTFS3 in fs/Kconfig and fs/Makefile

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
2021-08-13 07:59:09 -07:00
David Hildenbrand
6208721f13 binfmt: remove support for em86 (alpha only)
We have a fairly specific alpha binary loader in Linux: running x86
(i386, i486) binaries via the em86 [1] emulator. As noted in the Kconfig
option, the same behavior can be achieved via binfmt_misc, for example,
more nowadays used for running qemu-user.

An example on how to get binfmt_misc running with em86 can be found in
Documentation/admin-guide/binfmt-misc.rst

The defconfig does not have CONFIG_BINFMT_EM86=y set. And doing a
	make defconfig && make olddefconfig
results in
	# CONFIG_BINFMT_EM86 is not set

... as we don't seem to have any supported Linux distirbution for alpha
anymore, there isn't really any "default" user of that feature anymore.

Searching for "CONFIG_BINFMT_EM86=y" reveals mostly discussions from
around 20 years ago, like [2] describing how to get netscape via em86
running via em86, or [3] discussing that running wine or installing
Win 3.11 through em86 would be a nice feature.

The latest binaries available for em86 are from 2000, version 2.2.1 [4] --
which translates to "unsupported"; further, em86 doesn't even work with
glibc-2.x but only with glibc-2.0 [4, 5]. These are clear signs that
there might not be too many em86 users out there, especially users
relying on modern Linux kernels.

Even though the code footprint is relatively small, let's just get rid
of this blast from the past that's effectively unused.

[1] http://ftp.dreamtime.org/pub/linux/Linux-Alpha/em86/v0.4/docs/em86.html
[2] https://static.lwn.net/1998/1119/a/alpha-netscape.html
[3] https://groups.google.com/g/linux.debian.alpha/c/AkGuQHeCe0Y
[4] http://zeniv.linux.org.uk/pub/linux/alpha/em86/v2.2-1/relnotes.2.2.1.html
[5] https://forum.teamspeak.com/archive/index.php/t-1477.html

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Cc: linux-alpha@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2021-07-25 22:33:03 -07:00
Namjae Jeon
1a93084b9a ksmbd: move fs/cifsd to fs/ksmbd
Move fs/cifsd to fs/ksmbd and rename the remaining cifsd name to ksmbd.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-28 16:28:31 +09:00
Namjae Jeon
a848c4f15a cifsd: add Kconfig and Makefile
This adds the Kconfig and Makefile for cifsd.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-05-10 19:15:16 -05:00
David Howells
3d3c950467 netfs: Provide readahead and readpage netfs helpers
Add a pair of helper functions:

 (*) netfs_readahead()
 (*) netfs_readpage()

to do the work of handling a readahead or a readpage, where the page(s)
that form part of the request may be split between the local cache, the
server or just require clearing, and may be single pages and transparent
huge pages.  This is all handled within the helper.

Note that while both will read from the cache if there is data present,
only netfs_readahead() will expand the request beyond what it was asked to
do, and only netfs_readahead() will write back to the cache.

netfs_readpage(), on the other hand, is synchronous and only fetches the
page (which might be a THP) it is asked for.

The netfs gives the helper parameters from the VM, the cache cookie it
wants to use (or NULL) and a table of operations (only one of which is
mandatory):

 (*) expand_readahead() [optional]

     Called to allow the netfs to request an expansion of a readahead
     request to meet its own alignment requirements.  This is done by
     changing rreq->start and rreq->len.

 (*) clamp_length() [optional]

     Called to allow the netfs to cut down a subrequest to meet its own
     boundary requirements.  If it does this, the helper will generate
     additional subrequests until the full request is satisfied.

 (*) is_still_valid() [optional]

     Called to find out if the data just read from the cache has been
     invalidated and must be reread from the server.

 (*) issue_op() [required]

     Called to ask the netfs to issue a read to the server.  The subrequest
     describes the read.  The read request holds information about the file
     being accessed.

     The netfs can cache information in rreq->netfs_priv.

     Upon completion, the netfs should set the error, transferred and can
     also set FSCACHE_SREQ_CLEAR_TAIL and then call
     fscache_subreq_terminated().

 (*) done() [optional]

     Called after the pages have been unlocked.  The read request is still
     pinning the file and mapping and may still be pinning pages with
     PG_fscache.  rreq->error indicates any error that has been
     accumulated.

 (*) cleanup() [optional]

     Called when the helper is disposing of a finished read request.  This
     allows the netfs to clear rreq->netfs_priv.

Netfs support is enabled with CONFIG_NETFS_SUPPORT=y.  It will be built
even if CONFIG_FSCACHE=n and in this case much of it should be optimised
away, allowing the filesystem to use it even when caching is disabled.

Changes:
v5:
 - Comment why netfs_readahead() is putting pages[2].
 - Use page_file_mapping() rather than page->mapping[2].
 - Use page_index() rather than page->index[2].
 - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an
   appropriate ref too[4].

v4:
 - Folded in a kerneldoc comment fix.
 - Folded in a fix for the error handling in the case that ENOMEM occurs.
 - Added flag to netfs_subreq_terminated() to indicate that the caller may
   have been running async and stuff that might sleep needs punting to a
   workqueue (can't use in_softirq()[1]).

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1]
Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2]
Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4]
Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2021-04-23 10:14:32 +01:00
Viresh Kumar
be65de6b03 fs: Remove dcookies support
The dcookies stuff was only used by the kernel's old oprofile code. Now
that oprofile's support is removed from the kernel, there is no need for
dcookies as well. Remove it.

Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2021-01-29 10:06:46 +05:30
Linus Torvalds
c4728cfbed Refactored code for 5.10:
- Move the file range remap generic functions out of mm/filemap.c and
 fs/read_write.c and into fs/remap_range.c to reduce clutter in the first
 two files.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAl+SADAACgkQ+H93GTRK
 tOtZPxAAjwh/wOD+QPWAlu2zs1qvq9aU5uU56nWZC86JXr5RTokc2DIIwHvsT28I
 Xr3Oya8hiegsIVohQWLQr7AhVe469G2iegTkn7YmmLJLfrwhtSYxvkYTNMI/Uyx3
 LzGRcaqg9QR6DnrEHzI9QfCHyKz73PMD26eJR1wLerVIIcMYIsg7xp3Yd6Y0G5iD
 VX9qJ15OZNnXlQelG8E/A44dggZPt10D20czD9f/N7ZIpPxrQQLonO08i2YhPlRz
 sqQT4RjkZoJeZGY2wv2+vGMsbUxTui7sJj7Zsk+ljfo8ByY/wy1nK2IM9xR0jeZx
 o/td9YcSzGEMan9Q4jSIwMYbgMLw/x79nNWpnFdRh4+xQYGGPfkGOseJ9Sm0SlW5
 P6zb2bWMxZkiE/xq/Dsxbnl5Obzk3xc8c1w4nsStsQTcgBTLFJupP626Ib+yythZ
 pOzWRc2wdH9f4Oy52kxO8GB8kg23abXMACgTfSpzqU9GtSIijoS/Z+AN36jWT890
 mkoLFsssRfufmalQX438c8XF94xD+tRCOkxgq9ud71kcWgQnUVzQWvCflkIfetEa
 jcw+uuChuPOaQ9x6M6Z7gGt+a2zYreyGAmTw67M32UsgXQGO/nCx7f2j/7raYitd
 ZJb/XoGB1aRfWKpWjaL+66ORmOFY7Uuq9UkRibtYzmR6iMknQcA=
 =DAPl
 -----END PGP SIGNATURE-----

Merge tag 'vfs-5.10-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull clone/dedupe/remap code refactoring from Darrick Wong:
 "Move the generic file range remap (aka reflink and dedupe) functions
  out of mm/filemap.c and fs/read_write.c and into fs/remap_range.c to
  reduce clutter in the first two files"

* tag 'vfs-5.10-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  vfs: move the generic write and copy checks out of mm
  vfs: move the remap range helpers to remap_range.c
  vfs: move generic_remap_checks out of mm
2020-10-23 11:33:41 -07:00
Linus Torvalds
726eb70e0d Char/Misc driver patches for 5.10-rc1
Here is the big set of char, misc, and other assorted driver subsystem
 patches for 5.10-rc1.
 
 There's a lot of different things in here, all over the drivers/
 directory.  Some summaries:
 	- soundwire driver updates
 	- habanalabs driver updates
 	- extcon driver updates
 	- nitro_enclaves new driver
 	- fsl-mc driver and core updates
 	- mhi core and bus updates
 	- nvmem driver updates
 	- eeprom driver updates
 	- binder driver updates and fixes
 	- vbox minor bugfixes
 	- fsi driver updates
 	- w1 driver updates
 	- coresight driver updates
 	- interconnect driver updates
 	- misc driver updates
 	- other minor driver updates
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4g8YQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yngKgCeNpArCP/9vQJRK9upnDm8ZLunSCUAn1wUT/2A
 /bTQ42c/WRQ+LU828GSM
 =6sO2
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char, misc, and other assorted driver subsystem
  patches for 5.10-rc1.

  There's a lot of different things in here, all over the drivers/
  directory. Some summaries:

   - soundwire driver updates

   - habanalabs driver updates

   - extcon driver updates

   - nitro_enclaves new driver

   - fsl-mc driver and core updates

   - mhi core and bus updates

   - nvmem driver updates

   - eeprom driver updates

   - binder driver updates and fixes

   - vbox minor bugfixes

   - fsi driver updates

   - w1 driver updates

   - coresight driver updates

   - interconnect driver updates

   - misc driver updates

   - other minor driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits)
  binder: fix UAF when releasing todo list
  docs: w1: w1_therm: Fix broken xref, mistakes, clarify text
  misc: Kconfig: fix a HISI_HIKEY_USB dependency
  LSM: Fix type of id parameter in kernel_post_load_data prototype
  misc: Kconfig: add a new dependency for HISI_HIKEY_USB
  firmware_loader: fix a kernel-doc markup
  w1: w1_therm: make w1_poll_completion static
  binder: simplify the return expression of binder_mmap
  test_firmware: Test partial read support
  firmware: Add request_partial_firmware_into_buf()
  firmware: Store opt_flags in fw_priv
  fs/kernel_file_read: Add "offset" arg for partial reads
  IMA: Add support for file reads without contents
  LSM: Add "contents" flag to kernel_read_file hook
  module: Call security_kernel_post_load_data()
  firmware_loader: Use security_post_load_data()
  LSM: Introduce kernel_post_load_data() hook
  fs/kernel_read_file: Add file_size output argument
  fs/kernel_read_file: Switch buffer size arg to size_t
  fs/kernel_read_file: Remove redundant size argument
  ...
2020-10-15 10:01:51 -07:00
Darrick J. Wong
02e83f46eb vfs: move generic_remap_checks out of mm
I would like to move all the generic helpers for the vfs remap range
functionality (aka clonerange and dedupe) into a separate file so that
they won't be scattered across the vfs and the mm subsystems.  The
eventual goal is to be able to deselect remap_range.c if none of the
filesystems need that code, but the tricky part here is picking a
stable(ish) part of the merge window to rearrange code.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-10-14 16:47:08 -07:00
Kees Cook
5287b07f6d fs/kernel_read_file: Split into separate source file
These routines are used in places outside of exec(2), so in preparation
for refactoring them, move them into a separate source file,
fs/kernel_read_file.c.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20201002173828.2099543-5-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05 13:34:18 +02:00
Christoph Hellwig
028abd9222 fs: remove compat_sys_mount
compat_sys_mount is identical to the regular sys_mount now, so remove it
and use the native version everywhere.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-09-22 23:45:57 -04:00
Christoph Hellwig
c60166f042 init: add an init_mount helper
Like do_mount, but takes a kernel pointer for the destination path.
Switch over the mounts in the init code and devtmpfs to it, which
just happen to work due to the implicit set_fs(KERNEL_DS) during early
init right now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31 08:17:51 +02:00
Namjae Jeon
b9d1e2e626 exfat: add Kconfig and Makefile
This adds the Kconfig and Makefile for exfat.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-03-05 21:00:40 -05:00
Linus Torvalds
380a129eb2 fs: New zonefs file system
Zonefs is a very simple file system exposing each zone of a zoned block
 device as a file.
 
 Unlike a regular file system with native zoned block device support
 (e.g. f2fs or the on-going btrfs effort), zonefs does not hide the
 sequential write constraint of zoned block devices to the user. As a
 result, zonefs is not a POSIX compliant file system. Its goal is to
 simplify the implementation of zoned block devices support in
 applications by replacing raw block device file accesses with a richer
 file based API, avoiding relying on direct block device file ioctls
 which may be more obscure to developers.
 
 One example of this approach is the implementation of LSM
 (log-structured merge) tree structures (such as used in RocksDB and
 LevelDB) on zoned block devices by allowing SSTables to be stored in a
 zone file similarly to a regular file system rather than as a range of
 sectors of a zoned device. The introduction of the higher level
 construct "one file is one zone" can help reducing the amount of changes
 needed in the application while at the same time allowing the use of
 zoned block devices with various programming languages other than C.
 
 Zonefs IO management implementation uses the new iomap generic code.
 Zonefs has been successfully tested using a functional test suite
 (available with zonefs userland format tool on github) and a prototype
 implementation of LevelDB on top of zonefs.
 
 Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCXj1y8QAKCRDdoc3SxdoY
 dqozAP9J3t+Q95BgKgI5jP+XEtyYsPBTaVrvaSaViEnwtJLVoQD/ZQ1lTCZSE9OI
 UkvWawkuFtLGfOxTqyA3eZrZi22Ttwk=
 =YVvO
 -----END PGP SIGNATURE-----

Merge tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs

Pull new zonefs file system from Damien Le Moal:
 "Zonefs is a very simple file system exposing each zone of a zoned
  block device as a file.

  Unlike a regular file system with native zoned block device support
  (e.g. f2fs or the on-going btrfs effort), zonefs does not hide the
  sequential write constraint of zoned block devices to the user. As a
  result, zonefs is not a POSIX compliant file system. Its goal is to
  simplify the implementation of zoned block devices support in
  applications by replacing raw block device file accesses with a richer
  file based API, avoiding relying on direct block device file ioctls
  which may be more obscure to developers.

  One example of this approach is the implementation of LSM
  (log-structured merge) tree structures (such as used in RocksDB and
  LevelDB) on zoned block devices by allowing SSTables to be stored in a
  zone file similarly to a regular file system rather than as a range of
  sectors of a zoned device. The introduction of the higher level
  construct "one file is one zone" can help reducing the amount of
  changes needed in the application while at the same time allowing the
  use of zoned block devices with various programming languages other
  than C.

  Zonefs IO management implementation uses the new iomap generic code.
  Zonefs has been successfully tested using a functional test suite
  (available with zonefs userland format tool on github) and a prototype
  implementation of LevelDB on top of zonefs"

* tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Add documentation
  fs: New zonefs file system
2020-02-09 15:51:46 -08:00
Linus Torvalds
5586c3c1e0 Merge branch 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vboxfs from Al Viro:
 "This is the VirtualBox guest shared folder support by Hans de Goede,
  with fixups for fs_parse folded in to avoid bisection hazards from
  those API changes..."

* 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: Add VirtualBox guest shared folder (vboxsf) support
2020-02-09 12:41:00 -08:00
Hans de Goede
0fd1695766 fs: Add VirtualBox guest shared folder (vboxsf) support
VirtualBox hosts can share folders with guests, this commit adds a
VFS driver implementing the Linux-guest side of this, allowing folders
exported by the host to be mounted under Linux.

This driver depends on the guest <-> host IPC functions exported by
the vboxguest driver.

Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-08 17:34:58 -05:00
Damien Le Moal
8dcc1a9d90 fs: New zonefs file system
zonefs is a very simple file system exposing each zone of a zoned block
device as a file. Unlike a regular file system with zoned block device
support (e.g. f2fs), zonefs does not hide the sequential write
constraint of zoned block devices to the user. Files representing
sequential write zones of the device must be written sequentially
starting from the end of the file (append only writes).

As such, zonefs is in essence closer to a raw block device access
interface than to a full featured POSIX file system. The goal of zonefs
is to simplify the implementation of zoned block device support in
applications by replacing raw block device file accesses with a richer
file API, avoiding relying on direct block device file ioctls which may
be more obscure to developers. One example of this approach is the
implementation of LSM (log-structured merge) tree structures (such as
used in RocksDB and LevelDB) on zoned block devices by allowing SSTables
to be stored in a zone file similarly to a regular file system rather
than as a range of sectors of a zoned device. The introduction of the
higher level construct "one file is one zone" can help reducing the
amount of changes needed in the application as well as introducing
support for different application programming languages.

Zonefs on-disk metadata is reduced to an immutable super block to
persistently store a magic number and optional feature flags and
values. On mount, zonefs uses blkdev_report_zones() to obtain the device
zone configuration and populates the mount point with a static file tree
solely based on this information. E.g. file sizes come from the device
zone type and write pointer offset managed by the device itself.

The zone files created on mount have the following characteristics.
1) Files representing zones of the same type are grouped together
   under a common sub-directory:
     * For conventional zones, the sub-directory "cnv" is used.
     * For sequential write zones, the sub-directory "seq" is used.
  These two directories are the only directories that exist in zonefs.
  Users cannot create other directories and cannot rename nor delete
  the "cnv" and "seq" sub-directories.
2) The name of zone files is the number of the file within the zone
   type sub-directory, in order of increasing zone start sector.
3) The size of conventional zone files is fixed to the device zone size.
   Conventional zone files cannot be truncated.
4) The size of sequential zone files represent the file's zone write
   pointer position relative to the zone start sector. Truncating these
   files is allowed only down to 0, in which case, the zone is reset to
   rewind the zone write pointer position to the start of the zone, or
   up to the zone size, in which case the file's zone is transitioned
   to the FULL state (finish zone operation).
5) All read and write operations to files are not allowed beyond the
   file zone size. Any access exceeding the zone size is failed with
   the -EFBIG error.
6) Creating, deleting, renaming or modifying any attribute of files and
   sub-directories is not allowed.
7) There are no restrictions on the type of read and write operations
   that can be issued to conventional zone files. Buffered, direct and
   mmap read & write operations are accepted. For sequential zone files,
   there are no restrictions on read operations, but all write
   operations must be direct IO append writes. mmap write of sequential
   files is not allowed.

Several optional features of zonefs can be enabled at format time.
* Conventional zone aggregation: ranges of contiguous conventional
  zones can be aggregated into a single larger file instead of the
  default one file per zone.
* File ownership: The owner UID and GID of zone files is by default 0
  (root) but can be changed to any valid UID/GID.
* File access permissions: the default 640 access permissions can be
  changed.

The mkzonefs tool is used to format zoned block devices for use with
zonefs. This tool is available on Github at:

git@github.com:damien-lemoal/zonefs-tools.git.

zonefs-tools also includes a test suite which can be run against any
zoned block device, including null_blk block device created with zoned
mode.

Example: the following formats a 15TB host-managed SMR HDD with 256 MB
zones with the conventional zones aggregation feature enabled.

$ sudo mkzonefs -o aggr_cnv /dev/sdX
$ sudo mount -t zonefs /dev/sdX /mnt
$ ls -l /mnt/
total 0
dr-xr-xr-x 2 root root     1 Nov 25 13:23 cnv
dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq

The size of the zone files sub-directories indicate the number of files
existing for each type of zones. In this example, there is only one
conventional zone file (all conventional zones are aggregated under a
single file).

$ ls -l /mnt/cnv
total 137101312
-rw-r----- 1 root root 140391743488 Nov 25 13:23 0

This aggregated conventional zone file can be used as a regular file.

$ sudo mkfs.ext4 /mnt/cnv/0
$ sudo mount -o loop /mnt/cnv/0 /data

The "seq" sub-directory grouping files for sequential write zones has
in this example 55356 zones.

$ ls -lv /mnt/seq
total 14511243264
-rw-r----- 1 root root 0 Nov 25 13:23 0
-rw-r----- 1 root root 0 Nov 25 13:23 1
-rw-r----- 1 root root 0 Nov 25 13:23 2
...
-rw-r----- 1 root root 0 Nov 25 13:23 55354
-rw-r----- 1 root root 0 Nov 25 13:23 55355

For sequential write zone files, the file size changes as data is
appended at the end of the file, similarly to any regular file system.

$ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct
1+0 records in
1+0 records out
4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s

$ ls -l /mnt/seq/0
-rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0

The written file can be truncated to the zone size, preventing any
further write operation.

$ truncate -s 268435456 /mnt/seq/0
$ ls -l /mnt/seq/0
-rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0

Truncation to 0 size allows freeing the file zone storage space and
restart append-writes to the file.

$ truncate -s 0 /mnt/seq/0
$ ls -l /mnt/seq/0
-rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0

Since files are statically mapped to zones on the disk, the number of
blocks of a file as reported by stat() and fstat() indicates the size
of the file zone.

$ stat /mnt/seq/0
  File: /mnt/seq/0
  Size: 0       Blocks: 524288     IO Block: 4096   regular empty file
Device: 870h/2160d      Inode: 50431       Links: 1
Access: (0640/-rw-r-----)  Uid: (    0/    root)   Gid: (    0/  root)
Access: 2019-11-25 13:23:57.048971997 +0900
Modify: 2019-11-25 13:52:25.553805765 +0900
Change: 2019-11-25 13:52:25.553805765 +0900
 Birth: -

The number of blocks of the file ("Blocks") in units of 512B blocks
gives the maximum file size of 524288 * 512 B = 256 MB, corresponding
to the device zone size in this example. Of note is that the "IO block"
field always indicates the minimum IO size for writes and corresponds
to the device physical sector size.

This code contains contributions from:
* Johannes Thumshirn <jthumshirn@suse.de>,
* Darrick J. Wong <darrick.wong@oracle.com>,
* Christoph Hellwig <hch@lst.de>,
* Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> and
* Ting Yao <tingyao@hust.edu.cn>.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2020-02-07 14:39:38 +09:00
Arnd Bergmann
2af563d071 compat_ioctl: move sys_compat_ioctl() to ioctl.c
The rest of the fs/compat_ioctl.c file is no longer useful now,
so move the actual syscall as planned.

Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-01-03 09:42:52 +01:00
Jens Axboe
771b53d033 io-wq: small threadpool implementation for io_uring
This adds support for io-wq, a smaller and specialized thread pool
implementation. This is meant to replace workqueues for io_uring. Among
the reasons for this addition are:

- We can assign memory context smarter and more persistently if we
  manage the life time of threads.

- We can drop various work-arounds we have in io_uring, like the
  async_list.

- We can implement hashed work insertion, to manage concurrency of
  buffered writes without needing a) an extra workqueue, or b)
  needlessly making the concurrency of said workqueue very low
  which hurts performance of multiple buffered file writers.

- We can implement cancel through signals, for cancelling
  interruptible work like read/write (or send/recv) to/from sockets.

- We need the above cancel for being able to assign and use file tables
  from a process.

- We can implement a more thorough cancel operation in general.

- We need it to move towards a syslet/threadlet model for even faster
  async execution. For that we need to take ownership of the used
  threads.

This list is just off the top of my head. Performance should be the
same, or better, at least that's what I've seen in my testing. io-wq
supports basic NUMA functionality, setting up a pool per node.

io-wq hooks up to the scheduler schedule in/out just like workqueue
and uses that to drive the need for more/less workers.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-29 12:43:00 -06:00
Linus Torvalds
f60c55a94e fs-verity for 5.4
Please consider pulling fs-verity for 5.4.
 
 fs-verity is a filesystem feature that provides Merkle tree based
 hashing (similar to dm-verity) for individual readonly files, mainly for
 the purpose of efficient authenticity verification.
 
 This pull request includes:
 
 (a) The fs/verity/ support layer and documentation.
 
 (b) fs-verity support for ext4 and f2fs.
 
 Compared to the original fs-verity patchset from last year, the UAPI to
 enable fs-verity on a file has been greatly simplified.  Lots of other
 things were cleaned up too.
 
 fs-verity is planned to be used by two different projects on Android;
 most of the userspace code is in place already.  Another userspace tool
 ("fsverity-utils"), and xfstests, are also available.  e2fsprogs and
 f2fs-tools already have fs-verity support.  Other people have shown
 interest in using fs-verity too.
 
 I've tested this on ext4 and f2fs with xfstests, both the existing tests
 and the new fs-verity tests.  This has also been in linux-next since
 July 30 with no reported issues except a couple minor ones I found
 myself and folded in fixes for.
 
 Ted and I will be co-maintaining fs-verity.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCXX8ZUBQcZWJpZ2dlcnNA
 Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK2YOAQCbnBAKWDxXS3alLARRwjQLjmEtQIGl
 gsek+WurFIg/zAEAlpSzHwu13LvYzTqv3rhO2yhSlvhnDu4GQEJPXPm0wgM=
 =ID0n
 -----END PGP SIGNATURE-----

Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt

Pull fs-verity support from Eric Biggers:
 "fs-verity is a filesystem feature that provides Merkle tree based
  hashing (similar to dm-verity) for individual readonly files, mainly
  for the purpose of efficient authenticity verification.

  This pull request includes:

   (a) The fs/verity/ support layer and documentation.

   (b) fs-verity support for ext4 and f2fs.

  Compared to the original fs-verity patchset from last year, the UAPI
  to enable fs-verity on a file has been greatly simplified. Lots of
  other things were cleaned up too.

  fs-verity is planned to be used by two different projects on Android;
  most of the userspace code is in place already. Another userspace tool
  ("fsverity-utils"), and xfstests, are also available. e2fsprogs and
  f2fs-tools already have fs-verity support. Other people have shown
  interest in using fs-verity too.

  I've tested this on ext4 and f2fs with xfstests, both the existing
  tests and the new fs-verity tests. This has also been in linux-next
  since July 30 with no reported issues except a couple minor ones I
  found myself and folded in fixes for.

  Ted and I will be co-maintaining fs-verity"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  f2fs: add fs-verity support
  ext4: update on-disk format documentation for fs-verity
  ext4: add fs-verity read support
  ext4: add basic fs-verity support
  fs-verity: support builtin file signatures
  fs-verity: add SHA-512 support
  fs-verity: implement FS_IOC_MEASURE_VERITY ioctl
  fs-verity: implement FS_IOC_ENABLE_VERITY ioctl
  fs-verity: add data verification hooks for ->readpages()
  fs-verity: add the hook for file ->setattr()
  fs-verity: add the hook for file ->open()
  fs-verity: add inode and superblock fields
  fs-verity: add Kconfig and the helper functions for hashing
  fs: uapi: define verity bit for FS_IOC_GETFLAGS
  fs-verity: add UAPI header
  fs-verity: add MAINTAINERS file entry
  fs-verity: add a documentation file
2019-09-18 16:59:14 -07:00
Gao Xiang
47e4937a4a erofs: move erofs out of staging
EROFS filesystem has been merged into linux-staging for a year.

EROFS is designed to be a better solution of saving extra storage
space with guaranteed end-to-end performance for read-only files
with the help of reduced metadata, fixed-sized output compression
and decompression inplace technologies.

In the past year, EROFS was greatly improved by many people as
a staging driver, self-tested, betaed by a large number of our
internal users, successfully applied to almost all in-service
HUAWEI smartphones as the part of EMUI 9.1 and proven to be stable
enough to be moved out of staging.

EROFS is a self-contained filesystem driver. Although there are
still some TODOs to be more generic, we have a dedicated team
actively keeping on working on EROFS in order to make it better
with the evolution of Linux kernel as the other in-kernel filesystems.

As Pavel suggested, it's better to do as one commit since git
can do moves and all histories will be saved in this way.

Let's promote it from staging and enhance it more actively as
a "real" part of kernel for more wider scenarios!

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Pavel Machek <pavel@denx.de>
Cc: David Sterba <dsterba@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J . Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Richard Weinberger <richard@nod.at>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Li Guifu <bluce.liguifu@huawei.com>
Cc: Fang Wei <fangwei1@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190822213659.5501-1-hsiangkao@aol.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-24 14:20:10 +02:00
Eric Biggers
671e67b47e fs-verity: add Kconfig and the helper functions for hashing
Add the beginnings of the fs/verity/ support layer, including the
Kconfig option and various helper functions for hashing.  To start, only
SHA-256 is supported, but other hash algorithms can easily be added.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-28 16:59:16 -07:00
Darrick J. Wong
cb7181ff4b iomap: move the main iteration code into a separate file
Move the main iteration code into a separate file so that we can group
related functions in a single file instead of having a single enormous
source file.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-07-17 07:20:43 -07:00
Darrick J. Wong
1c230208f5 iomap: start moving code to fs/iomap/
Create the build infrastructure we need to start migrating iomap code to
fs/iomap/ from fs/iomap.c.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-07-15 08:50:57 -07:00
Linus Torvalds
5abe37954e Add as a feature case-insensitive directories (the casefold feature)
using Unicode 12.1.  Also, the usual largish number of cleanups and bug
 fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlzSDXYACgkQ8vlZVpUN
 gaPQ3Qf/Sh0NqHbmbdW1J52oh4GqUKUhUezEac40yZcZBU4p3PFPZ5Ji83kAQV5r
 JgHx5YW4AYHs59UkRVq/er7wKEFJxAE8weUq90WYLE1Z/EjojDE8JHSsK00obKNN
 rJOm5qX/gy5C7PVUSWkSuAZQPMSGrmH5U5ie0nrI7bFWnr7T5CQkWarspUq53JBG
 RP910mPTT/otE7iTgUzjDeAMKfaSdtRhcJn/uTQ+2YZ1BJsHBHJHDnfQtd3CttHs
 ncTUaqPnhWqOKJV2Y9TDyAWYeSbn30cF0dpBM38N4u6YwaUwrBp/kPI0tes97SgY
 lZM4VEAW6iF+18uLSyv7D0Mpba9qQg==
 =9R7U
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Add as a feature case-insensitive directories (the casefold feature)
  using Unicode 12.1.

  Also, the usual largish number of cleanups and bug fixes"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
  ext4: export /sys/fs/ext4/feature/casefold if Unicode support is present
  ext4: fix ext4_show_options for file systems w/o journal
  unicode: refactor the rule for regenerating utf8data.h
  docs: ext4.rst: document case-insensitive directories
  ext4: Support case-insensitive file name lookups
  ext4: include charset encoding information in the superblock
  MAINTAINERS: add Unicode subsystem entry
  unicode: update unicode database unicode version 12.1.0
  unicode: introduce test module for normalized utf8 implementation
  unicode: implement higher level API for string handling
  unicode: reduce the size of utf8data[]
  unicode: introduce code for UTF-8 normalization
  unicode: introduce UTF-8 character database
  ext4: actually request zeroing of inode table after grow
  ext4: cond_resched in work-heavy group loops
  ext4: fix use-after-free race with debug_want_extra_isize
  ext4: avoid drop reference to iloc.bh twice
  ext4: ignore e_value_offs for xattrs with value-in-ea-inode
  ext4: protect journal inode's blocks using block_validity
  ext4: use BUG() instead of BUG_ON(1)
  ...
2019-05-07 21:12:44 -07:00
Gabriel Krisman Bertazi
955405d117 unicode: introduce UTF-8 character database
The decomposition and casefolding of UTF-8 characters are described in a
prefix tree in utf8data.h, which is a generate from the Unicode
Character Database (UCD), published by the Unicode Consortium, and
should not be edited by hand.  The structures in utf8data.h are meant to
be used for lookup operations by the unicode subsystem, when decoding a
utf-8 string.

mkutf8data.c is the source for a program that generates utf8data.h. It
was written by Olaf Weber from SGI and originally proposed to be merged
into Linux in 2014.  The original proposal performed the compatibility
decomposition, NFKD, but the current version was modified by me to do
canonical decomposition, NFD, as suggested by the community.  The
changes from the original submission are:

  * Rebase to mainline.
  * Fix out-of-tree-build.
  * Update makefile to build 11.0.0 ucd files.
  * drop references to xfs.
  * Convert NFKD to NFD.
  * Merge back robustness fixes from original patch. Requested by
    Dave Chinner.

The original submission is archived at:

<https://linux-xfs.oss.sgi.narkive.com/Xx10wjVY/rfc-unicode-utf-8-support-for-xfs>

The utf8data.h file can be regenerated using the instructions in
fs/unicode/README.utf8data.

- Notes on the update from 8.0.0 to 11.0:

The structure of the ucd files and special cases have not experienced
any changes between versions 8.0.0 and 11.0.0.  8.0.0 saw the addition
of Cherokee LC characters, which is an interesting case for
case-folding.  The update is accompanied by new tests on the test_ucd
module to catch specific cases.  No changes to mkutf8data script were
required for the updates.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-25 13:38:44 -04:00