There's a panic that occurs in a few of envs, the call trace is as below:
[] general protection fault, ... 0x29acd70f1000a: 0000 [#1] SMP PTI
[] RIP: 0010:sctp_ulpevent_notify_peer_addr_change+0x4b/0x1fa [sctp]
[] sctp_assoc_control_transport+0x1b9/0x210 [sctp]
[] sctp_do_8_2_transport_strike.isra.16+0x15c/0x220 [sctp]
[] sctp_cmd_interpreter.isra.21+0x1231/0x1a10 [sctp]
[] sctp_do_sm+0xc3/0x2a0 [sctp]
[] sctp_generate_timeout_event+0x81/0xf0 [sctp]
This is caused by a transport use-after-free issue. When processing a
duplicate COOKIE-ECHO chunk in sctp_sf_do_dupcook_a(), both COOKIE-ACK
and SHUTDOWN chunks are allocated with the transort from the new asoc.
However, later in the sideeffect machine, the old asoc is used to send
them out and old asoc's shutdown_last_sent_to is set to the transport
that SHUTDOWN chunk attached to in sctp_cmd_setup_t2(), which actually
belongs to the new asoc. After the new_asoc is freed and the old asoc
T2 timeout, the old asoc's shutdown_last_sent_to that is already freed
would be accessed in sctp_sf_t2_timer_expire().
Thanks Alexander and Jere for helping dig into this issue.
To fix it, this patch is to do the asoc update first, then allocate
the COOKIE-ACK and SHUTDOWN chunks with the 'updated' old asoc. This
would make more sense, as a chunk from an asoc shouldn't be sent out
with another asoc. We had fixed quite a few issues caused by this.
Fixes: 145cb2f717 ("sctp: Fix bundling of SHUTDOWN with COOKIE-ACK")
Reported-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Reported-by: syzbot+bbe538efd1046586f587@syzkaller.appspotmail.com
Reported-by: Michal Tesar <mtesar@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable 'err' is set to zero but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.
Clean up the following clang-analyzer warning:
net/vmw_vsock/vmci_transport.c:948:2: warning: Value stored to 'err' is
never read [clang-analyzer-deadcode.DeadStores]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are cases where the page_pool need to refill with pages from the
page allocator. Some workloads cause the page_pool to release pages
instead of recycling these pages.
For these workload it can improve performance to bulk alloc pages from the
page-allocator to refill the alloc cache.
For XDP-redirect workload with 100G mlx5 driver (that use page_pool)
redirecting xdp_frame packets into a veth, that does XDP_PASS to create an
SKB from the xdp_frame, which then cannot return the page to the
page_pool.
Performance results under GitHub xdp-project[1]:
[1] https://github.com/xdp-project/xdp-project/blob/master/areas/mem/page_pool06_alloc_pages_bulk.org
Mel: The patch "net: page_pool: convert to use alloc_pages_bulk_array
variant" was squashed with this patch. From the test page, the array
variant was superior with one of the test results as follows.
Kernel XDP stats CPU pps Delta
Baseline XDP-RX CPU total 3,771,046 n/a
List XDP-RX CPU total 3,940,242 +4.49%
Array XDP-RX CPU total 4,249,224 +12.68%
Link: https://lkml.kernel.org/r/20210325114228.27719-10-mgorman@techsingularity.net
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Alexander Lobakin <alobakin@pm.me>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David Miller <davem@davemloft.net>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In preparation for next patch, move the dma mapping into its own function,
as this will make it easier to follow the changes.
[ilias.apalodimas: make page_pool_dma_map return boolean]
Link: https://lkml.kernel.org/r/20210325114228.27719-9-mgorman@techsingularity.net
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Alexander Lobakin <alobakin@pm.me>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David Miller <davem@davemloft.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reduce the rate at which nfsd threads hammer on the page allocator. This
improves throughput scalability by enabling the threads to run more
independently of each other.
[mgorman: Update interpretation of alloc_pages_bulk return value]
Link: https://lkml.kernel.org/r/20210325114228.27719-8-mgorman@techsingularity.net
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Alexander Lobakin <alobakin@pm.me>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Miller <davem@davemloft.net>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "SUNRPC consumer for the bulk page allocator"
This patch set and the measurements below are based on yesterday's
bulk allocator series:
git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux.git mm-bulk-rebase-v5r9
The patches change SUNRPC to invoke the array-based bulk allocator
instead of alloc_page().
The micro-benchmark results are promising. I ran a mixture of 256KB
reads and writes over NFSv3. The server's kernel is built with KASAN
enabled, so the comparison is exaggerated but I believe it is still
valid.
I instrumented svc_recv() to measure the latency of each call to
svc_alloc_arg() and report it via a trace point. The following results
are averages across the trace events.
Single page: 25.007 us per call over 532,571 calls
Bulk list: 6.258 us per call over 517,034 calls
Bulk array: 4.590 us per call over 517,442 calls
This patch (of 2)
Refactor:
I'm about to use the loop variable @i for something else.
As far as the "i++" is concerned, that is a post-increment. The
value of @i is not used subsequently, so the increment operator
is unnecessary and can be removed.
Also note that nfsd_read_actor() was renamed nfsd_splice_actor()
by commit cf8208d0ea ("sendfile: convert nfsd to
splice_direct_to_actor()").
Link: https://lkml.kernel.org/r/20210325114228.27719-7-mgorman@techsingularity.net
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Alexander Lobakin <alobakin@pm.me>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Miller <davem@davemloft.net>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Variable 'err' is set to -ENOMEM but this value is never read as it is
overwritten with a new value later on, hence the 'If statements' and
assignments are redundantand and can be removed.
Cleans up the following clang-analyzer warning:
net/ipv6/seg6.c:126:4: warning: Value stored to 'err' is never read
[clang-analyzer-deadcode.DeadStores]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a crash in the function br_get_link_af_size_filtered,
as the port_exists(dev) is true and the rx_handler_data of dev is NULL.
But the rx_handler_data of dev is correct saved in vmcore.
The oops looks something like:
...
pc : br_get_link_af_size_filtered+0x28/0x1c8 [bridge]
...
Call trace:
br_get_link_af_size_filtered+0x28/0x1c8 [bridge]
if_nlmsg_size+0x180/0x1b0
rtnl_calcit.isra.12+0xf8/0x148
rtnetlink_rcv_msg+0x334/0x370
netlink_rcv_skb+0x64/0x130
rtnetlink_rcv+0x28/0x38
netlink_unicast+0x1f0/0x250
netlink_sendmsg+0x310/0x378
sock_sendmsg+0x4c/0x70
__sys_sendto+0x120/0x150
__arm64_sys_sendto+0x30/0x40
el0_svc_common+0x78/0x130
el0_svc_handler+0x38/0x78
el0_svc+0x8/0xc
In br_add_if(), we found there is no guarantee that
assigning rx_handler_data to dev->rx_handler_data
will before setting the IFF_BRIDGE_PORT bit of priv_flags.
So there is a possible data competition:
CPU 0: CPU 1:
(RCU read lock) (RTNL lock)
rtnl_calcit() br_add_slave()
if_nlmsg_size() br_add_if()
br_get_link_af_size_filtered() -> netdev_rx_handler_register
...
// The order is not guaranteed
... -> dev->priv_flags |= IFF_BRIDGE_PORT;
// The IFF_BRIDGE_PORT bit of priv_flags has been set
-> if (br_port_exists(dev)) {
// The dev->rx_handler_data has NOT been assigned
-> p = br_port_get_rcu(dev);
....
-> rcu_assign_pointer(dev->rx_handler_data, rx_handler_data);
...
Fix it in br_get_link_af_size_filtered, using br_port_get_check_rcu() and checking the return value.
Signed-off-by: Zhang Zhengming <zhangzhengming@huawei.com>
Reviewed-by: Zhao Lei <zhaolei69@huawei.com>
Reviewed-by: Wang Xiaogang <wangxiaogang3@huawei.com>
Suggested-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch provides counters for SRv6 Behaviors as defined in [1],
section 6. For each SRv6 Behavior instance, counters defined in [1] are:
- the total number of packets that have been correctly processed;
- the total amount of traffic in bytes of all packets that have been
correctly processed;
In addition, this patch introduces a new counter that counts the number of
packets that have NOT been properly processed (i.e. errors) by an SRv6
Behavior instance.
Counters are not only interesting for network monitoring purposes (i.e.
counting the number of packets processed by a given behavior) but they also
provide a simple tool for checking whether a behavior instance is working
as we expect or not.
Counters can be useful for troubleshooting misconfigured SRv6 networks.
Indeed, an SRv6 Behavior can silently drop packets for very different
reasons (i.e. wrong SID configuration, interfaces set with SID addresses,
etc) without any notification/message to the user.
Due to the nature of SRv6 networks, diagnostic tools such as ping and
traceroute may be ineffective: paths used for reaching a given router can
be totally different from the ones followed by probe packets. In addition,
paths are often asymmetrical and this makes it even more difficult to keep
up with the journey of the packets and to understand which behaviors are
actually processing our traffic.
When counters are enabled on an SRv6 Behavior instance, it is possible to
verify if packets are actually processed by such behavior and what is the
outcome of the processing. Therefore, the counters for SRv6 Behaviors offer
an non-invasive observability point which can be leveraged for both traffic
monitoring and troubleshooting purposes.
[1] https://www.rfc-editor.org/rfc/rfc8986.html#name-counters
Troubleshooting using SRv6 Behavior counters
--------------------------------------------
Let's make a brief example to see how helpful counters can be for SRv6
networks. Let's consider a node where an SRv6 End Behavior receives an SRv6
packet whose Segment Left (SL) is equal to 0. In this case, the End
Behavior (which accepts only packets with SL >= 1) discards the packet and
increases the error counter.
This information can be leveraged by the network operator for
troubleshooting. Indeed, the error counter is telling the user that the
packet:
(i) arrived at the node;
(ii) the packet has been taken into account by the SRv6 End behavior;
(iii) but an error has occurred during the processing.
The error (iii) could be caused by different reasons, such as wrong route
settings on the node or due to an invalid SID List carried by the SRv6
packet. Anyway, the error counter is used to exclude that the packet did
not arrive at the node or it has not been processed by the behavior at
all.
Turning on/off counters for SRv6 Behaviors
------------------------------------------
Each SRv6 Behavior instance can be configured, at the time of its creation,
to make use of counters.
This is done through iproute2 which allows the user to create an SRv6
Behavior instance specifying the optional "count" attribute as shown in the
following example:
$ ip -6 route add 2001:db8::1 encap seg6local action End count dev eth0
per-behavior counters can be shown by adding "-s" to the iproute2 command
line, i.e.:
$ ip -s -6 route show 2001:db8::1
2001:db8::1 encap seg6local action End packets 0 bytes 0 errors 0 dev eth0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Impact of counters for SRv6 Behaviors on performance
====================================================
To determine the performance impact due to the introduction of counters in
the SRv6 Behavior subsystem, we have carried out extensive tests.
We chose to test the throughput achieved by the SRv6 End.DX2 Behavior
because, among all the other behaviors implemented so far, it reaches the
highest throughput which is around 1.5 Mpps (per core at 2.4 GHz on a
Xeon(R) CPU E5-2630 v3) on kernel 5.12-rc2 using packets of size ~ 100
bytes.
Three different tests were conducted in order to evaluate the overall
throughput of the SRv6 End.DX2 Behavior in the following scenarios:
1) vanilla kernel (without the SRv6 Behavior counters patch) and a single
instance of an SRv6 End.DX2 Behavior;
2) patched kernel with SRv6 Behavior counters and a single instance of
an SRv6 End.DX2 Behavior with counters turned off;
3) patched kernel with SRv6 Behavior counters and a single instance of
SRv6 End.DX2 Behavior with counters turned on.
All tests were performed on a testbed deployed on the CloudLab facilities
[2], a flexible infrastructure dedicated to scientific research on the
future of Cloud Computing.
Results of tests are shown in the following table:
Scenario (1): average 1504764,81 pps (~1504,76 kpps); std. dev 3956,82 pps
Scenario (2): average 1501469,78 pps (~1501,47 kpps); std. dev 2979,85 pps
Scenario (3): average 1501315,13 pps (~1501,32 kpps); std. dev 2956,00 pps
As can be observed, throughputs achieved in scenarios (2),(3) did not
suffer any observable degradation compared to scenario (1).
Thanks to Jakub Kicinski and David Ahern for their valuable suggestions
and comments provided during the discussion of the proposed RFCs.
[2] https://www.cloudlab.us
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to
walk all map elements in a more robust and easier to verify
fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF
on s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices
which don't need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability
on next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is
slow in reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take
place correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP
packets before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used
to define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
-independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and
bnxt support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP
which define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay
for packets sampled from switch HW (and corresponding egress
and policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP
forwarding, bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface
to distribute MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x -
11-port Ethernet switch with 8x 1-Gigabit Ethernet
and 3x 10-Gigabit interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
and BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack,
matching on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode
changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmCKFPIACgkQMUZtbf5S
Irtw0g/+NA8bWdHNgG4H5rya0pv2z3IieLRmSdDfKRQQXcJpklawc5MKVVaTee/Q
5/QqgPdCsu1LAU6JXBKsKmyDDaMlQKdWuKbOqDSiAQKoMesZStTEHf9d851ZzgxA
Cdb6O7BD3lBl/IN+oxNG+KcmD1LKquTPKGySq2mQtEdLO12ekAsranzmj4voKffd
q9tBShpXQ7Dq77DLYfiQXVCvsizNcbbJFuxX0o9Lpb9+61ZyYAbogZSa9ypiZZwR
I/9azRBtJg7UV1aD/cLuAfy66Qh7t63+rCxVazs5Os8jVO26P/jQdisnnOe/x+p9
wYEmKm3GSu0V4SAPxkWW+ooKusflCeqDoMIuooKt6kbP6BRj540veGw3Ww/m5YFr
7pLQkTSP/tSjuGQIdBE1LOP5LBO8DZeC8Kiop9V0fzAW9hFSZbEq25WW0bPj8QQO
zA4Z7yWlslvxcfY2BdJX3wD8klaINkl/8fDWZFFsBdfFX2VeLtm7Xfduw34BJpvU
rYT3oWr6PhtkPAKR32SUcemSfeWgIVU41eSshzRz3kez1NngBUuLlSGGSEaKbes5
pZVt6pYFFVByyf6MTHFEoQvafZfEw04JILZpo4R5V8iTHzom0kD3Py064sBiXEw2
B6t+OW4qgcxGblpFkK2lD4kR2s1TPUs0ckVO6sAy1x8q60KKKjY=
=vcbA
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
In case ethernet driver is enabled and INET is disabled, selftest will
fail to build.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 3e1e58d64c ("net: add generic selftest support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210428130947.29649-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Variable ns is set to 'skb->data[17]' but this value is never read as
it is overwritten or not used later on, hence it is a redundant
assignment and can be removed.
Cleans up the following clang-analyzer warning:
net/netrom/nr_in.c:156:2: warning: Value stored to 'ns' is never read
[clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1619603885-115604-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The assignment is not being used and redundant.
The check for null is redundant as nf_conntrack_put() also
checks this.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Link: https://lore.kernel.org/r/20210428060532.3330974-1-roid@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current definitions of constants for PROBE, currently defined only
in the net-next kernel branch, are inconsistent, with
some beginning with ICMP and others with simply EXT. This patch
attempts to standardize the naming conventions of the constants for
PROBE before their release into a stable Kernel, and to update the
relevant definitions in net/ipv4/icmp.c.
Similarly, the definitions for the code field (previously
ICMP_EXT_MAL_QUERY, etc) use the same prefixes as the type field. This
patch adds _CODE_ to the prefix to clarify the distinction of these
constants.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210427153635.2591-1-andreas.a.roeseler@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Clean up SCHED_DEBUG: move the decades old mess of sysctl, procfs and debugfs interfaces
to a unified debugfs interface.
- Signals: Allow caching one sigqueue object per task, to improve performance & latencies.
- Improve newidle_balance() irq-off latencies on systems with a large number of CPU cgroups.
- Improve energy-aware scheduling
- Improve the PELT metrics for certain workloads
- Reintroduce select_idle_smt() to improve load-balancing locality - but without the previous
regressions
- Add 'scheduler latency debugging': warn after long periods of pending need_resched. This
is an opt-in feature that requires the enabling of the LATENCY_WARN scheduler feature,
or the use of the resched_latency_warn_ms=xx boot parameter.
- CPU hotplug fixes for HP-rollback, and for the 'fail' interface. Fix remaining
balance_push() vs. hotplug holes/races
- PSI fixes, plus allow /proc/pressure/ files to be written by CAP_SYS_RESOURCE tasks as well
- Fix/improve various load-balancing corner cases vs. capacity margins
- Fix sched topology on systems with NUMA diameter of 3 or above
- Fix PF_KTHREAD vs to_kthread() race
- Minor rseq optimizations
- Misc cleanups, optimizations, fixes and smaller updates
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=E7mz
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Clean up SCHED_DEBUG: move the decades old mess of sysctl, procfs and
debugfs interfaces to a unified debugfs interface.
- Signals: Allow caching one sigqueue object per task, to improve
performance & latencies.
- Improve newidle_balance() irq-off latencies on systems with a large
number of CPU cgroups.
- Improve energy-aware scheduling
- Improve the PELT metrics for certain workloads
- Reintroduce select_idle_smt() to improve load-balancing locality -
but without the previous regressions
- Add 'scheduler latency debugging': warn after long periods of pending
need_resched. This is an opt-in feature that requires the enabling of
the LATENCY_WARN scheduler feature, or the use of the
resched_latency_warn_ms=xx boot parameter.
- CPU hotplug fixes for HP-rollback, and for the 'fail' interface. Fix
remaining balance_push() vs. hotplug holes/races
- PSI fixes, plus allow /proc/pressure/ files to be written by
CAP_SYS_RESOURCE tasks as well
- Fix/improve various load-balancing corner cases vs. capacity margins
- Fix sched topology on systems with NUMA diameter of 3 or above
- Fix PF_KTHREAD vs to_kthread() race
- Minor rseq optimizations
- Misc cleanups, optimizations, fixes and smaller updates
* tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
cpumask/hotplug: Fix cpu_dying() state tracking
kthread: Fix PF_KTHREAD vs to_kthread() race
sched/debug: Fix cgroup_path[] serialization
sched,psi: Handle potential task count underflow bugs more gracefully
sched: Warn on long periods of pending need_resched
sched/fair: Move update_nohz_stats() to the CONFIG_NO_HZ_COMMON block to simplify the code & fix an unused function warning
sched/debug: Rename the sched_debug parameter to sched_verbose
sched,fair: Alternative sched_slice()
sched: Move /proc/sched_debug to debugfs
sched,debug: Convert sysctl sched_domains to debugfs
debugfs: Implement debugfs_create_str()
sched,preempt: Move preempt_dynamic to debug.c
sched: Move SCHED_DEBUG sysctl to debugfs
sched: Don't make LATENCYTOP select SCHED_DEBUG
sched: Remove sched_schedstats sysctl out from under SCHED_DEBUG
sched/numa: Allow runtime enabling/disabling of NUMA balance without SCHED_DEBUG
sched: Use cpu_dying() to fix balance_push vs hotplug-rollback
cpumask: Introduce DYING mask
cpumask: Make cpu_{online,possible,present,active}() inline
rseq: Optimise rseq_get_rseq_cs() and clear_rseq_cs()
...
It seems like Fedora 34 ends up enabling a few new gcc warnings, notably
"-Wstringop-overread" and "-Warray-parameter".
Both of them cause what seem to be valid warnings in the kernel, where
we have array size mismatches in function arguments (that are no longer
just silently converted to a pointer to element, but actually checked).
This fixes most of the trivial ones, by making the function declaration
match the function definition, and in the case of intel_pm.c, removing
the over-specified array size from the argument declaration.
At least one 'stringop-overread' warning remains in the i915 driver, but
that one doesn't have the same obvious trivial fix, and may or may not
actually be indicative of a bug.
[ It was a mistake to upgrade one of my machines to Fedora 34 while
being busy with the merge window, but if this is the extent of the
compiler upgrade problems, things are better than usual - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In digital_tg_recv_dep_req, it calls nfc_tm_data_received(..,resp).
If nfc_tm_data_received() failed, the callee will free the resp via
kfree_skb() and return error. But in the exit branch, the resp
will be freed again.
My patch sets resp to NULL if nfc_tm_data_received() failed, to
avoid the double free.
Fixes: 1c7a4c24fb ("NFC Digital: Add target NFC-DEP support")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add support for the catch-all set element. This special element
can be used to define a default action to be applied in case that
the set lookup returns no matching element.
2) Fix incorrect #ifdef dependencies in the nftables cgroupsv2
support, from Arnd Bergmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
With the introduction of enforcing mode, setting global_id as soon
as we get it in the first MAuth reply will result in EACCES if the
connection is reset before we get the second MAuth reply containing
an auth ticket -- because on retry we would attempt to reclaim that
global_id with no auth ticket at hand.
Neither ceph_auth_client nor ceph_mon_client depend on global_id
being set ealy, so just delay the setting until we get and process
the second MAuth reply. While at it, complain if the monitor sends
a zero global_id or changes our global_id as the session is likely
to fail after that.
Cc: stable@vger.kernel.org # needs backporting for < 5.11
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
A dummy v3 encoding (exactly the same as v2) was introduced so that
the monitors can distinguish broken clients that may not include their
auth ticket in CEPHX_GET_AUTH_SESSION_KEY request on reconnects, thus
failing to prove previous possession of their global_id (one part of
CVE-2021-20288).
The kernel client has always included its auth ticket, so it is
compatible with enforcing mode as is. However we want to bump the
encoding version to avoid having to authenticate twice on the initial
connect -- all legacy (CephXAuthenticate < v3) are now forced do so in
order to expose insecure global_id reclaim.
Marking for stable since at least for 5.11 and 5.12 it is trivial
(v2 -> v3).
Cc: stable@vger.kernel.org # 5.11+
URL: https://tracker.ceph.com/issues/50452
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
l2tp_tunnel_register() registers a tunnel without fully
initializing its attribute. This can allow another kernel thread
running l2tp_xmit_core() to access the uninitialized data and
then cause a kernel NULL pointer dereference error, as shown below.
Thread 1 Thread 2
//l2tp_tunnel_register()
list_add_rcu(&tunnel->list, &pn->l2tp_tunnel_list);
//pppol2tp_connect()
tunnel = l2tp_tunnel_get(sock_net(sk), info.tunnel_id);
// Fetch the new tunnel
...
//l2tp_xmit_core()
struct sock *sk = tunnel->sock;
...
bh_lock_sock(sk);
//Null pointer error happens
tunnel->sock = sk;
Fix this bug by initializing tunnel->sock before adding the
tunnel into l2tp_tunnel_list.
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Sishuai Gong <sishuai@purdue.edu>
Reported-by: Sishuai Gong <sishuai@purdue.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable rc is set to zero but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.
Cleans up the following clang-analyzer warning:
net/smc/af_smc.c:1079:3: warning: Value stored to 'rc' is never read
[clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable err is set to -ENOMEM but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.
Cleans up the following clang-analyzer warning:
net/mpls/af_mpls.c:1022:2: warning: Value stored to 'err' is never read
[clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable rc is set to zero but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.
Cleans up the following clang-analyzer warning:
net/llc/llc_station.c:86:2: warning: Value stored to 'rc' is never read
[clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
record is being initialized to ctx->open_record but this is never
read as record is overwritten later on. Remove the redundant
initialization.
Cleans up the following clang-analyzer warning:
net/tls/tls_device.c:421:26: warning: Value stored to 'record' during
its initialization is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable nr_sig is being assigned a value however the assignment is
never read, so this redundant assignment can be removed.
Cleans up the following clang-analyzer warning:
net/rds/ib_send.c:297:2: warning: Value stored to 'nr_sig' is never read
[clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Although HWTSTAMP_TX_ONESTEP_SYNC existed in ioctl for hardware timestamp
configuration, the PTP Sync one-step timestamping had never been supported.
This patch is to truely support it.
- ocelot_port_txtstamp_request()
This function handles tx timestamp request by storing
ptp_cmd(tx timestamp type) in OCELOT_SKB_CB(skb)->ptp_cmd,
and additionally for two-step timestamp storing ts_id in
OCELOT_SKB_CB(clone)->ptp_cmd.
- ocelot_ptp_rew_op()
During xmit, this function is called to get rew_op (rewriter option) by
checking skb->cb for tx timestamp request, and configure to transmitting.
Non-onestep-Sync packet with one-step timestamp request falls back to use
two-step timestamp.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Free skb->cb usage in core driver and let device drivers decide to
use or not. The reason having a DSA_SKB_CB(skb)->clone was because
dsa_skb_tx_timestamp() which may set the clone pointer was called
before p->xmit() which would use the clone if any, and the device
driver has no way to initialize the clone pointer.
This patch just put memset(skb->cb, 0, sizeof(skb->cb)) at beginning
of dsa_slave_xmit(). Some new features in the future, like one-step
timestamp may need more bytes of skb->cb to use in
dsa_skb_tx_timestamp(), and p->xmit().
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It was a waste to clone skb directly in dsa_skb_tx_timestamp().
For one-step timestamping, a clone was not needed. For any failure of
port_txtstamp (this may usually happen), the skb clone had to be freed.
So this patch moves skb cloning for tx timestamp out of dsa core, and
let drivers clone skb in port_txtstamp if they really need.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move ptp_classify_raw out of dsa core driver for handling tx
timestamp request. Let device drivers do this if they want.
Not all drivers want to limit tx timestamping for only PTP
packet.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check tx timestamp request in core driver at very beginning of
dsa_skb_tx_timestamp(), so that most skbs not requiring tx
timestamp just return. And drop such checking in device drivers.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable offset is being assigned a value from a calculation
however the variable is never read, so this redundant variable
can be removed.
Cleans up the following clang-analyzer warning:
net/rxrpc/rxkad.c:579:2: warning: Value stored to 'offset' is never read
[clang-analyzer-deadcode.DeadStores].
net/rxrpc/rxkad.c:485:2: warning: Value stored to 'offset' is never read
[clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IPv6 Multicast Router Advertisements parsing has the following two
issues:
For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD
messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes,
assuming MLDv2 Reports with at least one multicast address entry).
When ipv6_mc_check_mld_msg() tries to parse an Multicast Router
Advertisement its MLD length check will fail - and it will wrongly
return -EINVAL, even if we have a valid MRD Advertisement. With the
returned -EINVAL the bridge code will assume a broken packet and will
wrongly discard it, potentially leading to multicast packet loss towards
multicast routers.
The second issue is the MRD header parsing in
br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header
immediately after the IPv6 header (IPv6 next header type). However
according to RFC4286, section 2 all MRD messages contain a Router Alert
option (just like MLD). So instead there is an IPv6 Hop-by-Hop option
for the Router Alert between the IPv6 and ICMPv6 header, again leading
to the bridge wrongly discarding Multicast Router Advertisements.
To fix these two issues, introduce a new return value -ENODATA to
ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop
option which is not an MLD but potentially an MRD packet. This also
simplifies further parsing in the bridge code, as ipv6_mc_check_mld()
already fully checks the ICMPv6 header and hop-by-hop option.
These issues were found and fixed with the help of the mrdisc tool
(https://github.com/troglobit/mrdisc).
Fixes: 4b3087c7e3 ("bridge: Snoop Multicast Router Advertisements")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=HTEy
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add support for measuring the SELinux state and policy capabilities
using IMA.
- A handful of SELinux/NFS patches to compare the SELinux state of one
mount with a set of mount options. Olga goes into more detail in the
patch descriptions, but this is important as it allows more
flexibility when using NFS and SELinux context mounts.
- Properly differentiate between the subjective and objective LSM
credentials; including support for the SELinux and Smack. My clumsy
attempt at a proper fix for AppArmor didn't quite pass muster so John
is working on a proper AppArmor patch, in the meantime this set of
patches shouldn't change the behavior of AppArmor in any way. This
change explains the bulk of the diffstat beyond security/.
- Fix a problem where we were not properly terminating the permission
list for two SELinux object classes.
* tag 'selinux-pr-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: add proper NULL termination to the secclass_map permissions
smack: differentiate between subjective and objective task credentials
selinux: clarify task subjective and objective credentials
lsm: separate security_task_getsecid() into subjective and objective variants
nfs: account for selinux security context when deciding to share superblock
nfs: remove unneeded null check in nfs_fill_super()
lsm,selinux: add new hook to compare new mount to an existing mount
selinux: fix misspellings using codespell tool
selinux: fix misspellings using codespell tool
selinux: measure state and policy capabilities
selinux: Allow context mounts for unpriviliged overlayfs
In some configurations, the sock_cgroup_ptr() function is not available:
net/netfilter/nft_socket.c: In function 'nft_sock_get_eval_cgroupv2':
net/netfilter/nft_socket.c:47:16: error: implicit declaration of function 'sock_cgroup_ptr'; did you mean 'obj_cgroup_put'? [-Werror=implicit-function-declaration]
47 | cgrp = sock_cgroup_ptr(&sk->sk_cgrp_data);
| ^~~~~~~~~~~~~~~
| obj_cgroup_put
net/netfilter/nft_socket.c:47:14: error: assignment to 'struct cgroup *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
47 | cgrp = sock_cgroup_ptr(&sk->sk_cgrp_data);
| ^
Change the caller to match the same #ifdef check, only calling it
when the function is defined.
Fixes: e0bb96db96 ("netfilter: nft_socket: add support for cgroupsv2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The variable is only used in an #ifdef, causing a harmless warning:
net/netfilter/nft_socket.c: In function 'nft_socket_init':
net/netfilter/nft_socket.c:137:27: error: unused variable 'level' [-Werror=unused-variable]
137 | unsigned int len, level;
| ^~~~~
Move it into the same #ifdef block.
Fixes: e0bb96db96 ("netfilter: nft_socket: add support for cgroupsv2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----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=fSr0
-----END PGP SIGNATURE-----
Merge tag 'afs-netfs-lib-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS updates from David Howells:
"Use the new netfs lib.
Begin the process of overhauling the use of the fscache API by AFS and
the introduction of support for features such as Transparent Huge
Pages (THPs).
- Add some support for THPs, including using core VM helper functions
to find details of pages.
- Use the ITER_XARRAY I/O iterator to mediate access to the pagecache
as this handles THPs and doesn't require allocation of large bvec
arrays.
- Delegate address_space read/pre-write I/O methods for AFS to the
netfs helper library. A method is provided to the library that
allows it to issue a read against the server.
This includes a change in use for PG_fscache (it now indicates a
DIO write in progress from the marked page), so a number of waits
need to be deployed for it.
- Split the core AFS writeback function to make it easier to modify
in future patches to handle writing to the cache. [This might
feasibly make more sense moved out into my fscache-iter branch].
I've tested these with "xfstests -g quick" against an AFS volume
(xfstests needs patching to make it work). With this, AFS without a
cache passes all expected xfstests; with a cache, there's an extra
failure, but that's also there before these patches. Fixing that
probably requires a greater overhaul (as can be found on my
fscache-iter branch, but that's for a later time).
Thanks should go to Marc Dionne and Jeff Altman of AuriStor for
exercising the patches in their test farm also"
Link: https://lore.kernel.org/lkml/3785063.1619482429@warthog.procyon.org.uk/
* tag 'afs-netfs-lib-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Use the netfs_write_begin() helper
afs: Use new netfs lib read helper API
afs: Use the fs operation ops to handle FetchData completion
afs: Prepare for use of THPs
afs: Extract writeback extension into its own function
afs: Wait on PG_fscache before modifying/releasing a page
afs: Use ITER_XARRAY for writing
afs: Set up the iov_iter before calling afs_extract_data()
afs: Log remote unmarshalling errors
afs: Don't truncate iter during data fetch
afs: Move key to afs_read struct
afs: Print the operation debug_id when logging an unexpected data version
afs: Pass page into dirty region helpers to provide THP size
afs: Disable use of the fscache I/O routines
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)
-----BEGIN PGP SIGNATURE-----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=wU6U
-----END PGP SIGNATURE-----
Merge tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull CFI on arm64 support from Kees Cook:
"This builds on last cycle's LTO work, and allows the arm64 kernels to
be built with Clang's Control Flow Integrity feature. This feature has
happily lived in Android kernels for almost 3 years[1], so I'm excited
to have it ready for upstream.
The wide diffstat is mainly due to the treewide fixing of mismatched
list_sort prototypes. Other things in core kernel are to address
various CFI corner cases. The largest code portion is the CFI runtime
implementation itself (which will be shared by all architectures
implementing support for CFI). The arm64 pieces are Acked by arm64
maintainers rather than coming through the arm64 tree since carrying
this tree over there was going to be awkward.
CFI support for x86 is still under development, but is pretty close.
There are a handful of corner cases on x86 that need some improvements
to Clang and objtool, but otherwise works well.
Summary:
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"
* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: allow CONFIG_CFI_CLANG to be selected
KVM: arm64: Disable CFI for nVHE
arm64: ftrace: use function_nocfi for ftrace_call
arm64: add __nocfi to __apply_alternatives
arm64: add __nocfi to functions that jump to a physical address
arm64: use function_nocfi with __pa_symbol
arm64: implement function_nocfi
psci: use function_nocfi for cpu_resume
lkdtm: use function_nocfi
treewide: Change list_sort to use const pointers
bpf: disable CFI in dispatcher functions
kallsyms: strip ThinLTO hashes from static functions
kthread: use WARN_ON_FUNCTION_MISMATCH
workqueue: use WARN_ON_FUNCTION_MISMATCH
module: ensure __cfi_check alignment
mm: add generic function_nocfi macro
cfi: add __cficanonical
add support for Clang CFI
This patch extends the set infrastructure to add a special catch-all set
element. If the lookup fails to find an element (or range) in the set,
then the catch-all element is selected. Users can specify a mapping,
expression(s) and timeout to be attached to the catch-all element.
This patch adds a catchall list to the set, this list might contain more
than one single catch-all element (e.g. in case that the catch-all
element is removed and a new one is added in the same transaction).
However, most of the time, there will be either one element or no
elements at all in this list.
The catch-all element is identified via NFT_SET_ELEM_CATCHALL flag and
such special element has no NFTA_SET_ELEM_KEY attribute. There is a new
nft_set_elem_catchall object that stores a reference to the dummy
catch-all element (catchall->elem) whose layout is the same of the set
element type to reuse the existing set element codebase.
The set size does not apply to the catch-all element, users can define a
catch-all element even if the set is full.
The check for valid set element flags hava been updates to report
EOPNOTSUPP in case userspace requests flags that are not supported when
using new userspace nftables and old kernel.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When binding sets to rule, validate set element data according to
set definition. This patch adds a helper function to be reused by
the catch-all set element support.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Rename:
- nft_set_elem_activate() to nft_set_elem_data_activate().
- nft_set_elem_deactivate() to nft_set_elem_data_deactivate().
To prepare for updates in the set element infrastructure to add support
for the special catch-all element.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Harald Arnesen reported [1] a deadlock at reboot time, and after
he captured a stack trace a picture developed of what's going on:
The distribution he's using is using iwd (not wpa_supplicant) to
manage wireless. iwd will usually use the "socket owner" option
when it creates new interfaces, so that they're automatically
destroyed when it quits (unexpectedly or otherwise). This is also
done by wpa_supplicant, but it doesn't do it for the normal one,
only for additional ones, which is different with iwd.
Anyway, during shutdown, iwd quits while the netdev is still UP,
i.e. IFF_UP is set. This causes the stack trace that Linus so
nicely transcribed from the pictures:
cfg80211_destroy_iface_wk() takes wiphy_lock
-> cfg80211_destroy_ifaces()
->ieee80211_del_iface
->ieeee80211_if_remove
->cfg80211_unregister_wdev
->unregister_netdevice_queue
->dev_close_many
->__dev_close_many
->raw_notifier_call_chain
->cfg80211_netdev_notifier_call
and that last call tries to take wiphy_lock again.
In commit a05829a722 ("cfg80211: avoid holding the RTNL when
calling the driver") I had taken into account the possibility of
recursing from cfg80211 into cfg80211_netdev_notifier_call() via
the network stack, but only for NETDEV_UNREGISTER, not for what
happens here, NETDEV_GOING_DOWN and NETDEV_DOWN notifications.
Additionally, while this worked still back in commit 78f22b6a3a
("cfg80211: allow userspace to take ownership of interfaces"), it
missed another corner case: unregistering a netdev will cause
dev_close() to be called, and thus stop wireless operations (e.g.
disconnecting), but there are some types of virtual interfaces in
wifi that don't have a netdev - for that we need an additional
call to cfg80211_leave().
So, to fix this mess, change cfg80211_destroy_ifaces() to not
require the wiphy_lock(), but instead make it acquire it, but
only after it has actually closed all the netdevs on the list,
and then call cfg80211_leave() as well before removing them
from the driver, to fix the second issue. The locking change in
this requires modifying the nl80211 call to not get the wiphy
lock passed in, but acquire it by itself after flushing any
potentially pending destruction requests.
[1] https://lore.kernel.org/r/09464e67-f3de-ac09-28a3-e27b7914ee7d@skogtun.org
Cc: stable@vger.kernel.org # 5.12
Reported-by: Harald Arnesen <harald@skogtun.org>
Fixes: 776a39b819 ("cfg80211: call cfg80211_destroy_ifaces() with wiphy lock held")
Fixes: 78f22b6a3a ("cfg80211: allow userspace to take ownership of interfaces")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Harald Arnesen <harald@skogtun.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Update NFSv2 and NFSv3 XDR encoding functions
- Add batch Receive posting to the server's RPC/RDMA transport (take 2)
- Reduce page allocator traffic in svcrdma
-----BEGIN PGP SIGNATURE-----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=BOO0
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"Highlights:
- Update NFSv2 and NFSv3 XDR encoding functions
- Add batch Receive posting to the server's RPC/RDMA transport (take 2)
- Reduce page allocator traffic in svcrdma"
* tag 'nfsd-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (70 commits)
NFSD: Use DEFINE_SPINLOCK() for spinlock
sunrpc: Remove unused function ip_map_lookup
NFSv4.2: fix copy stateid copying for the async copy
UAPI: nfsfh.h: Replace one-element array with flexible-array member
svcrdma: Clean up dto_q critical section in svc_rdma_recvfrom()
svcrdma: Remove svc_rdma_recv_ctxt::rc_pages and ::rc_arg
svcrdma: Remove sc_read_complete_q
svcrdma: Single-stage RDMA Read
SUNRPC: Move svc_xprt_received() call sites
SUNRPC: Export svc_xprt_received()
svcrdma: Retain the page backing rq_res.head[0].iov_base
svcrdma: Remove unused sc_pages field
svcrdma: Normalize Send page handling
svcrdma: Add a "deferred close" helper
svcrdma: Maintain a Receive water mark
svcrdma: Use svc_rdma_refresh_recvs() in wc_receive
svcrdma: Add a batch Receive posting mechanism
svcrdma: Remove stale comment for svc_rdma_wc_receive()
svcrdma: Provide an explanatory comment in CMA event handler
svcrdma: RPCDBG_FACILITY is no longer used
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmCGYWwTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqUAKB/9iZHHXxDt9Kt5aoY2BmcVwzPcFCfkn
b9240tREnTfIkVZPxLu55Zwe1fjR+hSmen7A4A4U5AxLXnpHf/UikWgGUD6f3Teb
KRALuRMIqBRGdX7vayqpO37sTMGJQT/HNxtwU8W83gUooKNWeZC1gEuR1kjd7g3I
01Yhd6/7BpTPYkbwh3HQ1H7yW4dNj7HHXlIoY8X2jl5baCgwxo/qiab3a6aCXmOz
KaUIrcyGe1698/jzdLa7TYoLW7fFiljRJzwZeFbc4+LB34TWg5xI6uicRuJ2s2S1
0oQmnXAsVB/gmL5UAPldHpclaFumxmnpRyFPH5Y+HhP8Rb3VotkIUL5j
=j5ru
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.13-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2021-04-26
this is a pull request of 4 patches for net-next/master.
the first two patches are from Colin Ian King and target the
etas_es58x driver, they add a missing NULL pointer check and fix some
typos.
The next two patches are by Erik Flodin. The first one updates the CAN
documentation regarding filtering, the other one fixes the header
alignment in CAN related proc output on 64 bit systems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) The various ip(6)table_foo incarnations are updated to expect
that the table is passed as 'void *priv' argument that netfilter core
passes to the hook functions. This reduces the struct net size by 2
cachelines on x86_64. From Florian Westphal.
2) Add cgroupsv2 support for nftables.
3) Fix bridge log family merge into nf_log_syslog: Missing
unregistration from netns exit path, from Phil Sutter.
4) Add nft_pernet() helper to access nftables pernet area.
5) Add struct nfnl_info to reduce nfnetlink callback footprint and
to facilite future updates. Consolidate nfnetlink callbacks.
6) Add CONFIG_NETFILTER_XTABLES_COMPAT Kconfig knob, also from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the big set of tty and serial driver updates for 5.13-rc1.
Actually busy this release, with a number of cleanups happening:
- much needed core tty cleanups by Jiri Slaby
- removal of unused and orphaned old-style serial drivers. If
anyone shows up with this hardware, it is trivial to restore
these but we really do not think they are in use anymore.
- fixes and cleanups from Johan Hovold on a number of termios
setting corner cases that loads of drivers got wrong as well
as removing unneeded code due to tty core changes from long
ago that were never propagated out to the drivers
- loads of platform-specific serial port driver updates and
fixes
- coding style cleanups and other small fixes and updates all
over the tty/serial tree.
All of these have been in linux-next for a while now with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIa3NQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykMXgCfX3FZgKveI4l94ChXSy4OyKwycHUAn00BzrMC
/7BwA1FnjQnC4zSzuHnm
=bAas
-----END PGP SIGNATURE-----
Merge tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver updates from Greg KH:
"Here is the big set of tty and serial driver updates for 5.13-rc1.
Actually busy this release, with a number of cleanups happening:
- much needed core tty cleanups by Jiri Slaby
- removal of unused and orphaned old-style serial drivers. If anyone
shows up with this hardware, it is trivial to restore these but we
really do not think they are in use anymore.
- fixes and cleanups from Johan Hovold on a number of termios setting
corner cases that loads of drivers got wrong as well as removing
unneeded code due to tty core changes from long ago that were never
propagated out to the drivers
- loads of platform-specific serial port driver updates and fixes
- coding style cleanups and other small fixes and updates all over
the tty/serial tree.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
serial: extend compile-test coverage
serial: stm32: add FIFO threshold configuration
dt-bindings: serial: 8250: update TX FIFO trigger level
dt-bindings: serial: stm32: override FIFO threshold properties
dt-bindings: serial: add RX and TX FIFO properties
serial: xilinx_uartps: drop low-latency workaround
serial: vt8500: drop low-latency workaround
serial: timbuart: drop low-latency workaround
serial: sunsu: drop low-latency workaround
serial: sifive: drop low-latency workaround
serial: txx9: drop low-latency workaround
serial: sa1100: drop low-latency workaround
serial: rp2: drop low-latency workaround
serial: rda: drop low-latency workaround
serial: owl: drop low-latency workaround
serial: msm_serial: drop low-latency workaround
serial: mpc52xx_uart: drop low-latency workaround
serial: meson: drop low-latency workaround
serial: mcf: drop low-latency workaround
serial: lpc32xx_hs: drop low-latency workaround
...
Here is the big set of various smaller driver subsystem updates for
5.13-rc1.
Major bits in here are:
- habanalabs driver updates
- hwtracing driver updates
- interconnect driver updates
- mhi driver updates
- extcon driver updates
- fpga driver updates
- new binder features added
- nvmem driver updates
- phy driver updates
- soundwire driver updates
- smaller misc and char driver fixes and updates.
- bluetooth driver bugfix that maintainer wanted to go through
this tree.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIa0CQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylQ/QCgwLQleU5hH/iQwxbHgNL5GawNUroAmwZtxILF
1r6zjmGi0Ak4oFBf7A0T
=Rrl6
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of various smaller driver subsystem updates for
5.13-rc1.
Major bits in here are:
- habanalabs driver updates
- hwtracing driver updates
- interconnect driver updates
- mhi driver updates
- extcon driver updates
- fpga driver updates
- new binder features added
- nvmem driver updates
- phy driver updates
- soundwire driver updates
- smaller misc and char driver fixes and updates.
- bluetooth driver bugfix that maintainer wanted to go through this
tree.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
bluetooth: eliminate the potential race condition when removing the HCI controller
coresight: etm-perf: Fix define build issue when built as module
phy: Revert "phy: ti: j721e-wiz: add missing of_node_put"
phy: ti: j721e-wiz: Add missing include linux/slab.h
phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()
stm class: Use correct UUID APIs
intel_th: pci: Add Alder Lake-M support
intel_th: pci: Add Rocket Lake CPU support
intel_th: Consistency and off-by-one fix
intel_th: Constify attribute_group structs
intel_th: Constify all drvdata references
stm class: Remove an unused function
habanalabs/gaudi: Fix uninitialized return code rc when read size is zero
greybus: es2: fix kernel-doc warnings
mei: me: add Alder Lake P device id.
dw-xdata-pcie: Update outdated info and improve text format
dw-xdata-pcie: Fix documentation build warns
fbdev: zero-fill colormap in fbcmap.c
firmware: qcom-scm: Fix QCOM_SCM configuration
speakup: i18n: Switch to kmemdup_nul() in spk_msg_set()
...
The compat layer needs to parse untrusted input (the ruleset)
to translate it to a 64bit compatible format.
We had a number of bugs in this department in the past, so allow users
to turn this feature off.
Add CONFIG_NETFILTER_XTABLES_COMPAT kconfig knob and make it default to y
to keep existing behaviour.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Update batch callbacks to use the nfnl_info structure. Rename one
clashing info variable to expr_info.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull crypto updates from Herbert Xu:
"API:
- crypto_destroy_tfm now ignores errors as well as NULL pointers
Algorithms:
- Add explicit curve IDs in ECDH algorithm names
- Add NIST P384 curve parameters
- Add ECDSA
Drivers:
- Add support for Green Sardine in ccp
- Add ecdh/curve25519 to hisilicon/hpre
- Add support for AM64 in sa2ul"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
fsverity: relax build time dependency on CRYPTO_SHA256
fscrypt: relax Kconfig dependencies for crypto API algorithms
crypto: camellia - drop duplicate "depends on CRYPTO"
crypto: s5p-sss - consistently use local 'dev' variable in probe()
crypto: s5p-sss - remove unneeded local variable initialization
crypto: s5p-sss - simplify getting of_device_id match data
ccp: ccp - add support for Green Sardine
crypto: ccp - Make ccp_dev_suspend and ccp_dev_resume void functions
crypto: octeontx2 - add support for OcteonTX2 98xx CPT block.
crypto: chelsio/chcr - Remove useless MODULE_VERSION
crypto: ux500/cryp - Remove duplicate argument
crypto: chelsio - remove unused function
crypto: sa2ul - Add support for AM64
crypto: sa2ul - Support for per channel coherency
dt-bindings: crypto: ti,sa2ul: Add new compatible for AM64
crypto: hisilicon - enable new error types for QM
crypto: hisilicon - add new error type for SEC
crypto: hisilicon - support new error types for ZIP
crypto: hisilicon - dynamic configuration 'err_info'
crypto: doc - fix kernel-doc notation in chacha.c and af_alg.c
...
Clean up: The last remaining field in struct rpcrdma_frwr has been
removed, so the struct can be eliminated.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up: Move more of struct rpcrdma_frwr into its parent.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up.
- Simplify variable initialization in the completion handlers.
- Move another field out of struct rpcrdma_frwr.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up (for several purposes):
- The MR's cid is initialized sooner so that tracepoints can show
something reasonable even if the MR is never posted.
- The MR's res.id doesn't change so the cid won't change either.
Initializing the cid once is sufficient.
- struct rpcrdma_frwr is going away soon.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up: The handler only recorded a trace event. If indeed no
action is needed by the RPC/RDMA consumer, then the event can be
ignored.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The Send signaling logic is a little subtle, so add some
observability around it. For every xprtrdma_mr_fastreg event, there
should be an xprtrdma_mr_localinv or xprtrdma_mr_reminv event.
When these tracepoints are enabled, we can see exactly when an MR is
DMA-mapped, registered, invalidated (either locally or remotely) and
then DMA-unmapped.
kworker/u25:2-190 [000] 787.979512: xprtrdma_mr_map: task:351@5 mr.id=4 nents=2 5608@0x8679e0c8f6f56000:0x00000503 (TO_DEVICE)
kworker/u25:2-190 [000] 787.979515: xprtrdma_chunk_read: task:351@5 pos=148 5608@0x8679e0c8f6f56000:0x00000503 (last)
kworker/u25:2-190 [000] 787.979519: xprtrdma_marshal: task:351@5 xid=0x8679e0c8: hdr=52 xdr=148/5608/0 read list/inline
kworker/u25:2-190 [000] 787.979525: xprtrdma_mr_fastreg: task:351@5 mr.id=4 nents=2 5608@0x8679e0c8f6f56000:0x00000503 (TO_DEVICE)
kworker/u25:2-190 [000] 787.979526: xprtrdma_post_send: task:351@5 cq.id=0 cid=73 (2 SGEs)
...
kworker/5:1H-219 [005] 787.980567: xprtrdma_wc_receive: cq.id=1 cid=161 status=SUCCESS (0/0x0) received=164
kworker/5:1H-219 [005] 787.980571: xprtrdma_post_recvs: peer=[192.168.100.55]:20049 r_xprt=0xffff8884974d4000: 0 new recvs, 70 active (rc 0)
kworker/5:1H-219 [005] 787.980573: xprtrdma_reply: task:351@5 xid=0x8679e0c8 credits=64
kworker/5:1H-219 [005] 787.980576: xprtrdma_mr_reminv: task:351@5 mr.id=4 nents=2 5608@0x8679e0c8f6f56000:0x00000503 (TO_DEVICE)
kworker/5:1H-219 [005] 787.980577: xprtrdma_mr_unmap: mr.id=4 nents=2 5608@0x8679e0c8f6f56000:0x00000503 (TO_DEVICE)
Note that I've moved the xprtrdma_post_send tracepoint so that event
always appears after the xprtrdma_mr_fastreg tracepoint. Otherwise
the event log looks counterintuitive (FastReg is always supposed to
happen before Send).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Send WRs can be signalled or unsignalled. A signalled Send WR
always has a matching Send completion, while a unsignalled Send
has a completion only if the Send WR fails.
xprtrdma has a Send account mechanism that is designed to reduce
the number of signalled Send WRs. This in turn mitigates the
interrupt rate of the underlying device.
RDMA consumers can't leave all Sends unsignaled, however, because
providers rely on Send completions to maintain their Send Queue head
and tail pointers. xprtrdma counts the number of unsignaled Send WRs
that have been posted to ensure that Sends are signalled often
enough to prevent the Send Queue from wrapping.
This mechanism neglected to account for FastReg WRs, which are
posted on the Send Queue but never signalled. As a result, the
Send Queue wrapped on occasion, resulting in duplication completions
of FastReg and LocalInv WRs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Throw away any reply where the LocalInv flushes or could not be
posted. The registered memory region is in an unknown state until
the disconnect completes.
rpcrdma_xprt_disconnect() will find and release the MR. No need to
put it back on the MR free list in this case.
The client retransmits pending RPC requests once it reestablishes a
fresh connection, so a replacement reply should be forthcoming on
the next connection instance.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Better not to touch MRs involved in a flush or post error until the
Send and Receive Queues are drained and the transport is fully
quiescent. Simply don't insert such MRs back onto the free list.
They remain on mr_all and will be released when the connection is
torn down.
I had thought that recycling would prevent hardware resources from
being tied up for a long time. However, since v5.7, a transport
disconnect destroys the QP and other hardware-owned resources. The
MRs get cleaned up nicely at that point.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up: The comment and the placement of the memory barrier is
confusing. Humans want to read the function statements from head
to tail.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up: To be consistent with other functions in this source file,
follow the naming convention of putting the object being acted upon
before the action itself.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The rpcrdma_mr_pop() earlier in the function has already cleared
out mr_list, so it must not be done again in the error path.
Fixes: 847568942f ("xprtrdma: Remove fr_state")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up: The name recv_buffer_put() is a vestige of older code,
and the function is just a wrapper for the newer rpcrdma_rep_put().
In most of the existing call sites, a pointer to the owning
rpcrdma_buffer is already available.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
After a reconnect, the reply handler is opening the cwnd (and thus
enabling more RPC Calls to be sent) /before/ rpcrdma_post_recvs()
can post enough Receive WRs to receive their replies. This causes an
RNR and the new connection is lost immediately.
The race is most clearly exposed when KASAN and disconnect injection
are enabled. This slows down rpcrdma_rep_create() enough to allow
the send side to post a bunch of RPC Calls before the Receive
completion handler can invoke ib_post_recv().
Fixes: 2ae50ad68c ("xprtrdma: Close window between waking RPC senders and posting Receives")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Defensive clean up: Protect the rb_all_reps list during rep
creation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Currently rpcrdma_reps_destroy() assumes that, at transport
tear-down, the content of the rb_free_reps list is the same as the
content of the rb_all_reps list. Although that is usually true,
using the rb_all_reps list should be more reliable because of
the way it's managed. And, rpcrdma_reps_unmap() uses rb_all_reps;
these two functions should both traverse the "all" list.
Ensure that all rpcrdma_reps are always destroyed whether they are
on the rep free list or not.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Defer destruction of an rpcrdma_rep until transport tear-down to
preserve the rb_all_reps list while Receives flush.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Currently the Receive completion handler refreshes the Receive Queue
whenever a successful Receive completion occurs.
On disconnect, xprtrdma drains the Receive Queue. The first few
Receive completions after a disconnect are typically successful,
until the first flushed Receive.
This means the Receive completion handler continues to post more
Receive WRs after the drain sentinel has been posted. The late-
posted Receives flush after the drain sentinel has completed,
leading to a crash later in rpcrdma_xprt_disconnect().
To prevent this crash, xprtrdma has to ensure that the Receive
handler stops posting Receives before ib_drain_rq() posts its
drain sentinel.
Suggested-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Commit e340c2d6ef ("xprtrdma: Reduce the doorbell rate (Receive)")
increased the number of Receive WRs that are posted by the client,
but did not increase the size of the Receive Queue allocated during
transport set-up.
This is usually not an issue because RPCRDMA_BACKWARD_WRS is defined
as (32) when SUNRPC_BACKCHANNEL is defined. In cases where it isn't,
there is a real risk of Receive Queue wrapping.
Fixes: e340c2d6ef ("xprtrdma: Reduce the doorbell rate (Receive)")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add a new structure to reduce callback footprint and to facilite
extensions of the nfnetlink callback interface in the future.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
devlink external port attribute for SF (Sub-Function) port flavour
This adds the support to instantiate Sub-Functions on external hosts
E.g when Eswitch manager is enabled on the ARM SmarNic SoC CPU, users
are now able to spawn new Sub-Functions on the Host server CPU.
Parav Pandit Says:
==================
This series introduces and uses external attribute for the SF port to
indicate that a SF port belongs to an external controller.
This is needed to generate unique phys_port_name when PF and SF numbers
are overlapping between local and external controllers.
For example two controllers 0 and 1, both of these controller have a SF.
having PF number 0, SF number 77. Here, phys_port_name has duplicate
entry which doesn't have controller number in it.
Hence, add controller number optionally when a SF port is for an
external controller. This extension is similar to existing PF and VF
eswitch ports of the external controller.
When a SF is for external controller an example view of external SF
port and config sequence:
On eswitch system:
$ devlink dev eswitch set pci/0033:01:00.0 mode switchdev
$ devlink port show
pci/0033:01:00.0/196607: type eth netdev enP51p1s0f0np0 flavour physical port 0 splittable false
pci/0033:01:00.0/131072: type eth netdev eth0 flavour pcipf controller 1 pfnum 0 external true splittable false
function:
hw_addr 00:00:00:00:00:00
$ devlink port add pci/0033:01:00.0 flavour pcisf pfnum 0 sfnum 77 controller 1
pci/0033:01:00.0/163840: type eth netdev eth1 flavour pcisf controller 1 pfnum 0 sfnum 77 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
phys_port_name construction:
$ cat /sys/class/net/eth1/phys_port_name
c1pf0sf77
Patch summary:
First 3 patches prepares the eswitch to handle vports in more generic
way using xarray to lookup vport from its unique vport number.
Patch-1 returns maximum eswitch ports only when eswitch is enabled
Patch-2 prepares eswitch to return eswitch max ports from a struct
Patch-3 uses xarray for vport and representor lookup
Patch-4 considers SF for an additioanl range of SF vports
Patch-5 relies on SF hw table to check SF support
Patch-6 extends SF devlink port attribute for external flag
Patch-7 stores the per controller SF allocation attributes
Patch-8 uses SF function id for filtering events
Patch-9 uses helper for allocation and free
Patch-10 splits hw table into per controller table and generic one
Patch-11 extends sf table for additional range
==================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmCDz80ACgkQSD+KveBX
+j4LmggAwS9otYoo639Kmow/wlMZ6yyLsH02zVMFLEJ2AE4VbL73i4iiQ67ZWygL
yQ8HawPAnythx4RsN/M6/WjSKRpdqTC27C9CpdM78zhXb1vnOrlzba7rYngqmo7N
5fIkGyjsUGHNqq+15SftK7JYbXFTe1b5RdWawXkQoyBlXTTBamyxD7C5NMpoDots
/e88Bs8Zy5nVPZqPchIId8TZEKKuO/heTz8ks6q6s/t1MGj7QP+ddxVMgNg00NR5
OpNTr7YYdpHxpfLSUZgdHaptwwKOx+nou8LdJkIKWPs7SHX6HDggyZJjGBOEWtE7
qG7oSip4olOTM0w9PZrAewLwSYhq7Q==
=oqBr
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-04-21
devlink external port attribute for SF (Sub-Function) port flavour
This adds the support to instantiate Sub-Functions on external hosts
E.g when Eswitch manager is enabled on the ARM SmarNic SoC CPU, users
are now able to spawn new Sub-Functions on the Host server CPU.
Parav Pandit Says:
==================
This series introduces and uses external attribute for the SF port to
indicate that a SF port belongs to an external controller.
This is needed to generate unique phys_port_name when PF and SF numbers
are overlapping between local and external controllers.
For example two controllers 0 and 1, both of these controller have a SF.
having PF number 0, SF number 77. Here, phys_port_name has duplicate
entry which doesn't have controller number in it.
Hence, add controller number optionally when a SF port is for an
external controller. This extension is similar to existing PF and VF
eswitch ports of the external controller.
When a SF is for external controller an example view of external SF
port and config sequence:
On eswitch system:
$ devlink dev eswitch set pci/0033:01:00.0 mode switchdev
$ devlink port show
pci/0033:01:00.0/196607: type eth netdev enP51p1s0f0np0 flavour physical port 0 splittable false
pci/0033:01:00.0/131072: type eth netdev eth0 flavour pcipf controller 1 pfnum 0 external true splittable false
function:
hw_addr 00:00:00:00:00:00
$ devlink port add pci/0033:01:00.0 flavour pcisf pfnum 0 sfnum 77 controller 1
pci/0033:01:00.0/163840: type eth netdev eth1 flavour pcisf controller 1 pfnum 0 sfnum 77 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
phys_port_name construction:
$ cat /sys/class/net/eth1/phys_port_name
c1pf0sf77
Patch summary:
First 3 patches prepares the eswitch to handle vports in more generic
way using xarray to lookup vport from its unique vport number.
Patch-1 returns maximum eswitch ports only when eswitch is enabled
Patch-2 prepares eswitch to return eswitch max ports from a struct
Patch-3 uses xarray for vport and representor lookup
Patch-4 considers SF for an additioanl range of SF vports
Patch-5 relies on SF hw table to check SF support
Patch-6 extends SF devlink port attribute for external flag
Patch-7 stores the per controller SF allocation attributes
Patch-8 uses SF function id for filtering events
Patch-9 uses helper for allocation and free
Patch-10 splits hw table into per controller table and generic one
Patch-11 extends sf table for additional range
==================
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Same patch as the ip_tables one: removal of all accesses to ip6_tables
xt_table pointers. After this patch the struct net xt_table anchors
can be removed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Same change as previous patch. Only difference:
no need to handle NULL template_ops parameter, the only caller
(arptable_filter) always passes non-NULL argument.
This removes all remaining accesses to net->ipv4.arptable_filter.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
iptable_x modules rely on 'struct net' to contain a pointer to the
table that should be evaluated.
In order to remove these pointers from struct net, pass them via
the 'priv' pointer in a similar fashion as nf_tables passes the
rule data.
To do that, duplicate the nf_hook_info array passed in from the
iptable_x modules, update the ops->priv pointers of the copy to
refer to the table and then change the hookfn implementations to
just pass the 'priv' argument to the traverser.
After this patch, the xt_table pointers can already be removed
from struct net.
However, changes to struct net result in re-compile of the entire
network stack, so do the removal after arptables and ip6tables
have been converted as well.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This changes how ip(6)table nat passes the ruleset/table to the
evaluation loop.
At the moment, it will fetch the table from struct net.
This change stores the table in the hook_ops 'priv' argument
instead.
This requires to duplicate the hook_ops for each netns, so
they can store the (per-net) xt_table structure.
The dupliated nat hook_ops get stored in net_generic data area.
They are free'd in the namespace exit path.
This is a pre-requisite to remove the xt_table/ruleset pointers
from struct net.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
No need for these.
There is only one caller, the xtables core, when the table is registered
for the first time with a particular network namespace.
After ->table_init() call, the table is linked into the tables[af] list,
so next call to that function will skip the ->table_init().
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
xtables stores the xt_table structs in the struct net. This isn't
needed anymore, the structures could be passed via the netfilter hook
'private' pointer to the hook functions, which would allow us to remove
those pointers from struct net.
As a first step, reduce the number of accesses to the
net->ipv4.ip6table_{raw,filter,...} pointers.
This allows the tables to get unregistered by name instead of having to
pass the raw address.
The xt_table structure cane looked up by name+address family instead.
This patch is useless as-is (the backends still have the raw pointer
address), but it lowers the bar to remove those.
It also allows to put the 'was table registered in the first place' check
into ip_tables.c rather than have it in each table sub module.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This will be used to obtain the xt_table struct given address family and
table name.
Followup patches will reduce the number of direct accesses to the xt_table
structures via net->ipv{4,6}.ip(6)table_{nat,mangle,...} pointers, then
remove them.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Its the same function as ipt_unregister_table_exit.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ebtables stores the table internal data (what gets passed to the
ebt_do_table() interpreter) in struct net.
nftables keeps the internal interpreter format in pernet lists
and passes it via the netfilter core infrastructure (priv pointer).
Do the same for ebtables: the nf_hook_ops are duplicated via kmemdup,
then the ops->priv pointer is set to the table that is being registered.
After that, the netfilter core passes this table info to the hookfn.
This allows to remove the pointers from struct net.
Same pattern can be applied to ip/ip6/arptables.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When I changed defrag hooks to no longer get registered by default I
intentionally made it so that registration can only be un-done by unloading
the nf_defrag_ipv4/6 module.
In hindsight this was too conservative; there is no reason to keep defrag
on while there is no feature dependency anymore.
Moreover, this won't work if user isn't allowed to remove nf_defrag module.
This adds the disable() functions for both ipv4 and ipv6 and calls them
from conntrack, TPROXY and the xtables socket module.
ipvs isn't converted here, it will behave as before this patch and
will need module removal.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 69 non-merge commits during the last 22 day(s) which contain
a total of 69 files changed, 3141 insertions(+), 866 deletions(-).
The main changes are:
1) Add BPF static linker support for extern resolution of global, from Andrii.
2) Refine retval for bpf_get_task_stack helper, from Dave.
3) Add a bpf_snprintf helper, from Florent.
4) A bunch of miscellaneous improvements from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Before this fix, the function and userdata columns weren't aligned:
device can_id can_mask function userdata matches ident
vcan0 92345678 9fffffff 0000000000000000 0000000000000000 0 raw
vcan0 123 00000123 0000000000000000 0000000000000000 0 raw
After the fix they are:
device can_id can_mask function userdata matches ident
vcan0 92345678 9fffffff 0000000000000000 0000000000000000 0 raw
vcan0 123 00000123 0000000000000000 0000000000000000 0 raw
Link: Link: https://lore.kernel.org/r/20210425141440.229653-1-erik@flodin.me
Signed-off-by: Erik Flodin <erik@flodin.me>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This reverts commit 0c85a7e874.
The games with 'rm' are on (two separate instances) of a local variable,
and make no difference.
Quoting Aditya Pakki:
"I was the author of the patch and it was the cause of the giant UMN
revert.
The patch is garbage and I was unaware of the steps involved in
retracting it. I *believed* the maintainers would pull it, given it
was already under Greg's list. The patch does not introduce any bugs
but is pointless and is stupid. I accept my incompetence and for not
requesting a revert earlier."
Link: https://lwn.net/Articles/854319/
Requested-by: Aditya Pakki <pakki001@umn.edu>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Extended SF port attributes to have optional external flag similar to
PCI PF and VF port attributes.
External atttibute is required to generate unique phys_port_name when PF number
and SF number are overlapping between two controllers similar to SR-IOV
VFs.
When a SF is for external controller an example view of external SF
port and config sequence.
On eswitch system:
$ devlink dev eswitch set pci/0033:01:00.0 mode switchdev
$ devlink port show
pci/0033:01:00.0/196607: type eth netdev enP51p1s0f0np0 flavour physical port 0 splittable false
pci/0033:01:00.0/131072: type eth netdev eth0 flavour pcipf controller 1 pfnum 0 external true splittable false
function:
hw_addr 00:00:00:00:00:00
$ devlink port add pci/0033:01:00.0 flavour pcisf pfnum 0 sfnum 77 controller 1
pci/0033:01:00.0/163840: type eth netdev eth1 flavour pcisf controller 1 pfnum 0 sfnum 77 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
phys_port_name construction:
$ cat /sys/class/net/eth1/phys_port_name
c1pf0sf77
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This patch adds support for MSG_PEEK flag. Packets are not removed
from the receive_queue if MSG_PEEK set in recv() system call.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently mptcp_sendmsg() fails with EOPNOTSUPP if the
user-space provides some unsupported flag. That is unexpected
and may foul existing applications migrated to MPTCP, which
expect a different behavior.
Change the mentioned function to silently ignore the unsupported
flags except MSG_FASTOPEN. This is the only flags currently not
supported by MPTCP with user-space visible side-effects.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/162
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mentioned flag is currently silenlty ignored. This
change implements the TCP-like behaviour, dropping the
pending data up to the specified length.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sigend-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_recvmsg() currently silently ignores MSG_ERRQUEUE, returning
input data instead of error cmsg.
This change provides a dummy implementation for MSG_ERRQUEUE - always
returns no data. That is consistent with the current lack of a suitable
IP_RECVERR setsockopt() support.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With this change, the MPTCP-level retransmission timer is used to resend
DATA_FIN. The retranmit timer is not stopped while waiting for a
MPTCP-level ACK of DATA_FIN, and retransmitted DATA_FINs are sent on all
subflows. The retry interval starts at TCP_RTO_MIN and then doubles on
each attempt, up to TCP_RTO_MAX.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/146
Fixes: 43b54c6ee3 ("mptcp: Use full MPTCP-level disconnect state machine")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2021-04-23
1) The SPI flow key in struct flowi has no consumers,
so remove it. From Florian Westphal.
2) Remove stray synchronize_rcu from xfrm_init.
From Florian Westphal.
3) Use the new exit_pre hook to reset the netlink socket
on net namespace destruction. From Florian Westphal.
4) Remove an unnecessary get_cpu() in ipcomp, that
code is always called with BHs off.
From Sabrina Dubroca.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
tw_prot_cleanup will check the twsk_prot.
Fixes: 0f5907af39 ("net: Fix potential memory leak in proto_register()")
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implementation of meters supposed to be a classic token bucket with 2
typical parameters: rate and burst size.
Burst size in this schema is the maximum number of bytes/packets that
could pass without being rate limited.
Recent changes to userspace datapath made meter implementation to be
in line with the kernel one, and this uncovered several issues.
The main problem is that maximum bucket size for unknown reason
accounts not only burst size, but also the numerical value of rate.
This creates a lot of confusion around behavior of meters.
For example, if rate is configured as 1000 pps and burst size set to 1,
this should mean that meter will tolerate bursts of 1 packet at most,
i.e. not a single packet above the rate should pass the meter.
However, current implementation calculates maximum bucket size as
(rate + burst size), so the effective bucket size will be 1001. This
means that first 1000 packets will not be rate limited and average
rate might be twice as high as the configured rate. This also makes
it practically impossible to configure meter that will have burst size
lower than the rate, which might be a desirable configuration if the
rate is high.
Inability to configure low values of a burst size and overall inability
for a user to predict what will be a maximum and average rate from the
configured parameters of a meter without looking at the OVS and kernel
code might be also classified as a security issue, because drop meters
are frequently used as a way of protection from DoS attacks.
This change removes rate from the calculation of a bucket size, making
it in line with the classic token bucket algorithm and essentially
making the rate and burst tolerance being predictable from a users'
perspective.
Same change proposed for the userspace implementation.
Fixes: 96fbc13d7e ("openvswitch: Add meter infrastructure")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a logic error that could result in a null deref if the user sets
the mode incorrectly for the given addr type.
Signed-off-by: Dan Robertson <dan@dlrobertson.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210423040214.15438-2-dan@dlrobertson.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
When alloc_pages_node() returns null in svc_rqst_alloc(), the
null rq_scratch_page pointer will be dereferenced when calling
put_page() in svc_rqst_free(). Fix it by adding a null check.
Addresses-Coverity: ("Dereference after null check")
Fixes: 5191955d6f ("SUNRPC: Prepare for xdr_stream-style decoding on the server-side")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There is a possible race condition vulnerability between issuing a HCI
command and removing the cont. Specifically, functions hci_req_sync()
and hci_dev_do_close() can race each other like below:
thread-A in hci_req_sync() | thread-B in hci_dev_do_close()
| hci_req_sync_lock(hdev);
test_bit(HCI_UP, &hdev->flags); |
... | test_and_clear_bit(HCI_UP, &hdev->flags)
hci_req_sync_lock(hdev); |
|
In this commit we alter the sequence in function hci_req_sync(). Hence,
the thread-A cannot issue th.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Cc: Marcel Holtmann <marcel@holtmann.org>
Fixes: 7c6a329e44 ("[Bluetooth] Fix regression from using default link policy")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DPDK default burst size is 32, however, kernel xsk sendto
syscall can not handle all 32 at one time, and return with
error.
So make kernel XDP socket batch size larger to avoid
unnecessary syscall fail and context switch which will help
to increase performance.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/1618378752-4191-1-git-send-email-lirongqing@baidu.com
If a generic XDP program changes the destination MAC address from/to
multicast/broadcast, the skb->pkt_type is updated to properly handle
the packet when passed up the stack. When changing the MAC from/to
the NICs MAC, PACKET_HOST/OTHERHOST is not updated, though, making
the behavior different from that of native XDP.
Remember the PACKET_HOST/OTHERHOST state before calling the program
in generic XDP, and update pkt_type accordingly if the destination
MAC address has changed. As eth_type_trans() assumes a default
pkt_type of PACKET_HOST, restore that before calling it.
The use case for this is when a XDP program wants to push received
packets up the stack by rewriting the MAC to the NICs MAC, for
example by cluster nodes sharing MAC addresses.
Fixes: 2972495699 ("net: fix generic XDP to handle if eth header was mangled")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210419141559.8611-1-martin@strongswan.org
This code is supposed to pass negative "err" values for tracing but it
passes positive values instead. The problem is that the
trace_svcsock_tcp_send() function takes a long but "err" is an int and
"sent" is a u32. The negative is first type promoted to u32 so it
becomes a high positive then it is promoted to long and it stays
positive.
Fix this by casting "err" directly to long.
Fixes: 998024dee1 ("SUNRPC: Add more svcsock tracepoints")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Following Race Condition was detected:
<CPU A, t0>: Executing: __netif_receive_skb() ->__netif_receive_skb_core()
-> arp_rcv() -> arp_process().arp_process() calls __neigh_lookup() which
takes a reference on neighbour entry 'n'.
Moves further along, arp_process() and calls neigh_update()->
__neigh_update(). Neighbour entry is unlocked just before a call to
neigh_update_gc_list.
This unlocking paves way for another thread that may take a reference on
the same and mark it dead and remove it from gc_list.
<CPU B, t1> - neigh_flush_dev() is under execution and calls
neigh_mark_dead(n) marking the neighbour entry 'n' as dead. Also n will be
removed from gc_list.
Moves further along neigh_flush_dev() and calls
neigh_cleanup_and_release(n), but since reference count increased in t1,
'n' couldn't be destroyed.
<CPU A, t3>- Code hits neigh_update_gc_list, with neighbour entry
set as dead.
<CPU A, t4> - arp_process() finally calls neigh_release(n), destroying
the neighbour entry and we have a destroyed ntry still part of gc_list.
Fixes: eb4e8fac00d1("neighbour: Prevent a dead entry from updating gc_list")
Signed-off-by: Chinmay Agarwal <chinagar@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CONFIG_NET_SWITCHDEV is disabled, the shim for switchdev_port_attr_set
inside br_mc_disabled_update returns -EOPNOTSUPP. This is not caught,
and propagated to the caller of br_multicast_add_port, preventing ports
from joining the bridge.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: ae1ea84b33 ("net: bridge: propagate error code and extack from br_mc_disabled_update")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is possible that the MHI ul_callback will be invoked immediately
following the queueing of the skb for transmission, leading to the
callback decrementing the refcount of the associated sk and freeing the
skb.
As such the dereference of skb and the increment of the sk refcount must
happen before the skb is queued, to avoid the skb to be used after free
and potentially the sk to drop its last refcount..
Fixes: 6e728f3213 ("net: qrtr: Add MHI transport layer")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Starting with patch:
a8b659e7ff ("net: dsa: act as passthrough for bridge port flags")
drivers without "port_bridge_flags" callback will fail to join the bridge.
Looking at the code, -EOPNOTSUPP seems to be the proper return value,
which makes at least microchip and atheros switches work again.
Fixes: 5961d6a12c ("net: dsa: inherit the actual bridge port flags at join time")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported by syzbot [1], there is a memory leak while closing the
socket. We partially solved this issue with commit ac03046ece
("vsock/virtio: free packets during the socket release"), but we
forgot to drain the RX queue when the socket is definitely closed by
the scheduled work.
To avoid future issues, let's use the new virtio_transport_remove_sock()
to drain the RX queue before removing the socket from the af_vsock lists
calling vsock_remove_sock().
[1] https://syzkaller.appspot.com/bug?extid=24452624fc4c571eedd9
Fixes: ac03046ece ("vsock/virtio: free packets during the socket release")
Reported-and-tested-by: syzbot+24452624fc4c571eedd9@syzkaller.appspotmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some combinations of tag protocols and Ethernet controllers are
incompatible, and it is hard for the driver to keep track of these.
Therefore, allow the device tree author (typically the board vendor)
to inform the driver of this fact by selecting an alternate protocol
that is known to work.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously DSA ports were also included, on the assumption that the
protocol used by the CPU port had to the matched throughout the entire
tree.
As there is not yet any consumer in need of this, drop the call.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* set sk_pacing_shift for 802.3->802.11 encap offload
* some monitor support for 802.11->802.3 decap offload
* HE (802.11ax) spec updates
* userspace API for TDLS HE support
* along with various other small features, cleanups and
fixups
-----BEGIN PGP SIGNATURE-----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=b0NQ
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2021-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Another set of updates, all over the map:
* set sk_pacing_shift for 802.3->802.11 encap offload
* some monitor support for 802.11->802.3 decap offload
* HE (802.11ax) spec updates
* userspace API for TDLS HE support
* along with various other small features, cleanups and
fixups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of generic selftest should be able to work with probably all ethernet
controllers. The DSA switches are not exception, so enable it by default at
least for DSA.
This patch was tested with SJA1105 and AR9331.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Port some parts of the stmmac selftest and reuse it as basic generic selftest
library. This patch was tested with following combinations:
- iMX6DL FEC -> AT8035
- iMX6DL FEC -> SJA1105Q switch -> KSZ8081
- iMX6DL FEC -> SJA1105Q switch -> KSZ9031
- AR9331 ag71xx -> AR9331 PHY
- AR9331 ag71xx -> AR9331 switch -> AR9331 PHY
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido suggests we add a comment about the init of stats to -1.
This is unlikely to be clear to first time readers.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We encountered a crash: in the packet receiving process, we got an
illegal VLAN device address, but the VLAN device address saved in vmcore
is correct. After checking the code, we found a possible data
competition:
CPU 0: CPU 1:
(RCU read lock) (RTNL lock)
vlan_do_receive() register_vlan_dev()
vlan_find_dev()
->__vlan_group_get_device() ->vlan_group_prealloc_vid()
In vlan_group_prealloc_vid(), We need to make sure that memset()
in kzalloc() is executed before assigning value to vlan devices array:
=================================
kzalloc()
->memset(object, 0, size)
smp_wmb()
vg->vlan_devices_arrays[pidx][vidx] = array;
==================================
Because __vlan_group_get_device() function depends on this order.
otherwise we may get a wrong address from the hardware cache on
another cpu.
So fix it by adding memory barrier instruction to ensure the order
of memory operations.
Signed-off-by: Di Zhu <zhudi21@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 38ec4944b5 ("gro: ensure frag0 meets IP header alignment")
did the right thing, but missed the fact that napi_gro_frags() logics
calls for skb_gro_reset_offset() *before* pulling Ethernet header
to the skb linear space.
That said, the introduced check for frag0 address being aligned to 4
always fails for it as Ethernet header is obviously 14 bytes long,
and in case with NET_IP_ALIGN its start is not aligned to 4.
Fix this by adding @nhoff argument to skb_gro_reset_offset() which
tells if an IP header is placed right at the start of frag0 or not.
This restores Fast GRO for napi_gro_frags() that became very slow
after the mentioned commit, and preserves the introduced check to
avoid silent unaligned accesses.
From v1 [0]:
- inline tiny skb_gro_reset_offset() to let the code be optimized
more efficively (esp. for the !NET_IP_ALIGN case) (Eric);
- pull in Reviewed-by from Eric.
[0] https://lore.kernel.org/netdev/20210418114200.5839-1-alobakin@pm.me
Fixes: 38ec4944b5 ("gro: ensure frag0 meets IP header alignment")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add vlan match and pop actions to the flowtable offload,
patches from wenxu.
2) Reduce size of the netns_ct structure, which itself is
embedded in struct net Make netns_ct a read-mostly structure.
Patches from Florian Westphal.
3) Add FLOW_OFFLOAD_XMIT_UNSPEC to skip dst check from garbage
collector path, as required by the tc CT action. From Roi Dayan.
4) VLAN offload fixes for nftables: Allow for matching on both s-vlan
and c-vlan selectors. Fix match of VLAN id due to incorrect
byteorder. Add a new routine to properly populate flow dissector
ethertypes.
5) Missing keys in ip{6}_route_me_harder() results in incorrect
routes. This includes an update for selftest infra. Patches
from Ido Schimmel.
6) Add counter hardware offload support through FLOW_CLS_STATS.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a reproducible sequence from the userland that will trigger a WARN_ON()
condition in taprio_get_start_time, which causes kernel to panic if configured
as "panic_on_warn". Catch this condition in parse_taprio_schedule to
prevent this condition.
Reported as bug on syzkaller:
https://syzkaller.appspot.com/bug?extid=d50710fd0873a9c6b40c
Reported-by: syzbot+d50710fd0873a9c6b40c@syzkaller.appspotmail.com
Signed-off-by: Du Cheng <ducheng2@gmail.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following out-of-bounds warning:
net/ethtool/ioctl.c:492:2: warning: 'memcpy' offset [49, 84] from the object at 'link_usettings' is out of the bounds of referenced subobject 'base' with type 'struct ethtool_link_settings' at offset 0 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
some struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &link_usettings.base. Fix this by directly
using &link_usettings and _from_ as destination and source addresses,
instead.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, a multi-part nexthop dump is restarted based on the number of
nexthops that have been dumped so far. This can result in a lot of
nexthops not being dumped when nexthops are simultaneously deleted:
# ip nexthop | wc -l
65536
# ip nexthop flush
Dump was interrupted and may be inconsistent.
Flushed 36040 nexthops
# ip nexthop | wc -l
29496
Instead, restart the dump based on the nexthop identifier (fixed number)
of the last successfully dumped nexthop:
# ip nexthop | wc -l
65536
# ip nexthop flush
Dump was interrupted and may be inconsistent.
Flushed 65536 nexthops
# ip nexthop | wc -l
0
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Tested-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
VMCI feature is not supported in conjunction with the vSphere Fault
Tolerance (FT) feature.
VMware Tools can repeatedly try to create a vsock connection. If FT is
enabled the kernel logs is flooded with the following messages:
qp_alloc_hypercall result = -20
Could not attach to queue pair with -20
"qp_alloc_hypercall result = -20" was hidden by commit e8266c4c33
("VMCI: Stop log spew when qp allocation isn't possible"), but "Could
not attach to queue pair with -20" is still there flooding the log.
Since the error message can be useful in some cases, print it only once.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While testing ipcomp on a realtime kernel, Xiumei reported a "sleeping
in atomic" bug, caused by a memory allocation while preemption is
disabled (ipcomp_decompress -> alloc_page -> ... get_page_from_freelist).
As Sebastian noted [1], this get_cpu() isn't actually needed, since
ipcomp_decompress() is called in napi context anyway, so BH is already
disabled.
This patch replaces get_cpu + per_cpu_ptr with this_cpu_ptr, then
simplifies the error returns, since there isn't any common operation
left.
[1] https://lore.kernel.org/lkml/20190820082810.ixkmi56fp7u7eyn2@linutronix.de/
Cc: Juri Lelli <jlelli@redhat.com>
Reported-by: Xiumei Mu <xmu@redhat.com>
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Use the new exit_pre hook to NULL the netlink socket.
The net namespace core will do a synchronize_rcu() between the exit_pre
and exit/exit_batch handlers.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This function is called during boot, from ipv4 stack, there is no need
to set the pointer to NULL (static storage duration, so already NULL).
No need for the synchronize_rcu either. Remove both.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xfrm session decode ipv4 path (but not ipv6) sets this, but there are no
consumers. Remove it.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In case the frequency is invalid, ieee80211_parse_ch_switch_ie
will fail and we may not even reach the check in
ieee80211_sta_process_chanswitch. Drop the connection
in case ieee80211_parse_ch_switch_ie failed, but still
take into account the CSA mode to remember not to send
a deauth frame in case if it is forbidden to.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210409123755.34712ef96a0a.I75d7ad7f1d654e8b0aa01cd7189ff00a510512b3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This will allow the low level driver to get the wdev during
the add_interface flow.
In order to do that, remove a few checks from there and do
not return NULL for vifs that were not yet added to the
driver. Note that all the current callers of this helper
function assume that the vif already exists:
- The callers from the drivers already have a vif pointer.
Before this change, ieee80211_vif_to_wdev would return NULL
in some cases, but those callers don't even check they
get a non-NULL pointer from ieee80211_vif_to_wdev.
- The callers from net/mac80211/cfg.c assume the vif is
already added to the driver as well.
So, this change has no impact on existing callers of this
helper function.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210409123755.6078d3517095.I1907a45f267a62dab052bcc44428aa7a2005ffc9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
My previous commit to not apply flow control to management frames
that are going over TXQs (which is currently only the case for
iwlwifi, I think) broke things, with iwlwifi firmware crashing on
certain frames. As it turns out, that was due to the frame being
too short: space for the MIC wasn't added at the end of encrypted
management frames.
Clearly, this is due to using the 'frags' queue - this is meant
only for frames that have already been processed for TX, and the
code in ieee80211_tx_dequeue() just returns them. This caused all
management frames to now not get any TX processing.
To fix this, use IEEE80211_TX_INTCFL_NEED_TXPROCESSING (which is
currently used only in other circumstances) to indicate that the
frames need processing, and clear it immediately after so that,
at least in theory, MMPDUs can be fragmented.
Fixes: 73bc9e0af5 ("mac80211: don't apply flow control on management frames")
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20210416134702.ef8486a64293.If0a9025b39c71bb91b11dd6ac45547aba682df34@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch adds the .offload_stats operation to synchronize hardware
stats with the expression data. Update the counter expression to use
this new interface. The hardware stats are retrieved from the netlink
dump path via FLOW_CLS_STATS command to the driver.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Netfilter tries to reroute mangled packets as a different route might
need to be used following the mangling. When this happens, netfilter
does not populate the IP protocol, the source port and the destination
port in the flow key. Therefore, FIB rules that match on these fields
are ignored and packets can be misrouted.
Solve this by dissecting the outer flow and populating the flow key
before rerouting the packet. Note that flow dissection only happens when
FIB rules that match on these fields are installed, so in the common
case there should not be a penalty.
Reported-by: Michal Soltys <msoltyspl@yandex.pl>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The nftables offload parser sets FLOW_DISSECTOR_KEY_BASIC .n_proto to the
ethertype field in the ethertype frame. However:
- FLOW_DISSECTOR_KEY_BASIC .n_proto field always stores either IPv4 or IPv6
ethertypes.
- FLOW_DISSECTOR_KEY_VLAN .vlan_tpid stores either the 802.1q and 802.1ad
ethertypes. Same as for FLOW_DISSECTOR_KEY_CVLAN.
This function adjusts the flow dissector to handle two scenarios:
1) FLOW_DISSECTOR_KEY_VLAN .vlan_tpid is set to 802.1q or 802.1ad.
Then, transfer:
- the .n_proto field to FLOW_DISSECTOR_KEY_VLAN .tpid.
- the original FLOW_DISSECTOR_KEY_VLAN .tpid to the
FLOW_DISSECTOR_KEY_CVLAN .tpid
- the original FLOW_DISSECTOR_KEY_CVLAN .tpid to the .n_proto field.
2) .n_proto is set to 802.1q or 802.1ad. Then, transfer:
- the .n_proto field to FLOW_DISSECTOR_KEY_VLAN .tpid.
- the original FLOW_DISSECTOR_KEY_VLAN .tpid to the .n_proto field.
Fixes: a82055af59 ("netfilter: nft_payload: add VLAN offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The flow dissector representation expects the VLAN id in host byteorder.
Add the NFT_OFFLOAD_F_NETWORK2HOST flag to swap the bytes from nft_cmp.
Fixes: a82055af59 ("netfilter: nft_payload: add VLAN offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
- add another struct flow_dissector_key_vlan for C-VLAN
- update layer 3 dependency to allow to match on IPv4/IPv6
Fixes: 89d8fd44ab ("netfilter: nft_payload: add C-VLAN offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch used the macro helper mptcp_for_each_subflow() instead of
list_for_each_entry() in mptcp_close.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a tracepoint in subflow_check_data_avail() to show the
mapping status.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a tracepoint in ack_update_msk() to track the
incoming data_ack and window/snd_una updates.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a tracepoint in the mapping status function
get_mapping_status() to dump every mpext field.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a tracepoint in the packet scheduler function
mptcp_subflow_get_send().
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moved the static function mptcp_subflow_active to protocol.h
as an inline one.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some of the sequence numbers are printed as the negative ones in the debug
log:
[ 46.250932] MPTCP: DSS
[ 46.250940] MPTCP: data_fin=0 dsn64=0 use_map=0 ack64=1 use_ack=1
[ 46.250948] MPTCP: data_ack=2344892449471675613
[ 46.251012] MPTCP: msk=000000006e157e3f status=10
[ 46.251023] MPTCP: msk=000000006e157e3f snd_data_fin_enable=0 pending=0 snd_nxt=2344892449471700189 write_seq=2344892449471700189
[ 46.251343] MPTCP: msk=00000000ec44a129 ssk=00000000f7abd481 sending dfrag at seq=-1658937016627538668 len=100 already sent=0
[ 46.251360] MPTCP: data_seq=16787807057082012948 subflow_seq=1 data_len=100 dsn64=1
This patch used the format specifier %u instead of %d for the unsigned int
values to fix it.
Fixes: d9ca1de8c0 ("mptcp: move page frag allocation in mptcp_sendmsg()")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop 'S' from end of CONFIG_MPTCP_KUNIT_TESTS in order to adhere to the
KUNIT *_KUNIT_TEST config name format.
Fixes: a00a582203 (mptcp: move crypto test to KUNIT)
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following out-of-bounds warning:
net/core/flow_dissector.c:835:3: warning: 'memcpy' offset [33, 48] from the object at 'flow_keys' is out of the bounds of referenced subobject 'ipv6_src' with type '__u32[4]' {aka 'unsigned int[4]'} at offset 16 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). So, the compiler legitimately complains about it. As these
are just a couple of members, fix this by copying each one of them in
separate calls to memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When I added support to allow generic netlink multicast groups to be
restricted to subscribers with CAP_NET_ADMIN I was unaware that a
genl_bind implementation already existed in the past.
It was reverted due to ABBA deadlock:
1. ->netlink_bind gets called with the table lock held.
2. genetlink bind callback is invoked, it grabs the genl lock.
But when a new genl subsystem is (un)registered, these two locks are
taken in reverse order.
One solution would be to revert again and add a comment in genl
referring 1e82a62fec, "genetlink: remove genl_bind").
This would need a second change in mptcp to not expose the raw token
value anymore, e.g. by hashing the token with a secret key so userspace
can still associate subflow events with the correct mptcp connection.
However, Paolo Abeni reminded me to double-check why the netlink table is
locked in the first place.
I can't find one. netlink_bind() is already called without this lock
when userspace joins a group via NETLINK_ADD_MEMBERSHIP setsockopt.
Same holds for the netlink_unbind operation.
Digging through the history, commit f773608026
("netlink: access nlk groups safely in netlink bind and getname")
expanded the lock scope.
commit 3a20773bee ("net: netlink: cap max groups which will be considered in netlink_bind()")
... removed the nlk->ngroups access that the lock scope
extension was all about.
Reduce the lock scope again and always call ->netlink_bind without
the table lock.
The Fixes tag should be vs. the patch mentioned in the link below,
but that one got squash-merged into the patch that came earlier in the
series.
Fixes: 4d54cc3211 ("mptcp: avoid lock_fast usage in accept path")
Link: https://lore.kernel.org/mptcp/20210213000001.379332-8-mathew.j.martineau@linux.intel.com/T/#u
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Sean Tranchetti <stranche@codeaurora.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most devices maintain RMON (RFC 2819) stats - particularly
the "histogram" of packets received by size. Unlike other
RFCs which duplicate IEEE stats, the short/oversized frame
counters in RMON don't seem to match IEEE stats 1-to-1 either,
so expose those, too. Do not expose basic packet, CRC errors
etc - those are already otherwise covered.
Because standard defines packet ranges only up to 1518, and
everything above that should theoretically be "oversized"
- devices often create their own ranges.
Going beyond what the RFC defines - expose the "histogram"
in the Tx direction (assume for now that the ranges will
be the same).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Number of devices maintains the standard-based MAC control
counters for control frames. Add a API for those.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the MAC statistics are included in
struct rtnl_link_stats64, but some fields
are aggregated. Besides it's good to expose
these clearly hardware stats separately.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an interface for reading standard stats, including
stats which don't have a corresponding control interface.
Start with IEEE 802.3 PHY stats. There seems to be only
one stat to expose there.
Define API to not require user space changes when new
stats or groups are added. Groups are based on bitset,
stats have a string set associated.
v1: wrap stats in a nest
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following out-of-bounds warning:
net/sctp/sm_make_chunk.c:3150:4: warning: 'memcpy' offset [17, 28] from the object at 'addr' is out of the bounds of referenced subobject 'v4' with type 'struct sockaddr_in' at offset 0 [-Warray-bounds]
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__ipv6_dev_mc_dec() internally uses sleepable functions so that caller
must not acquire atomic locks. But caller, which is addrconf_verify_rtnl()
acquires rcu_read_lock_bh().
So this warning occurs in the __ipv6_dev_mc_dec().
Test commands:
ip netns add A
ip link add veth0 type veth peer name veth1
ip link set veth1 netns A
ip link set veth0 up
ip netns exec A ip link set veth1 up
ip a a 2001:db8::1/64 dev veth0 valid_lft 2 preferred_lft 1
Splat looks like:
============================
WARNING: suspicious RCU usage
5.12.0-rc6+ #515 Not tainted
-----------------------------
kernel/sched/core.c:8294 Illegal context switch in RCU-bh read-side
critical section!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
4 locks held by kworker/4:0/1997:
#0: ffff88810bd72d48 ((wq_completion)ipv6_addrconf){+.+.}-{0:0}, at:
process_one_work+0x761/0x1440
#1: ffff888105c8fe00 ((addr_chk_work).work){+.+.}-{0:0}, at:
process_one_work+0x795/0x1440
#2: ffffffffb9279fb0 (rtnl_mutex){+.+.}-{3:3}, at:
addrconf_verify_work+0xa/0x20
#3: ffffffffb8e30860 (rcu_read_lock_bh){....}-{1:2}, at:
addrconf_verify_rtnl+0x23/0xc60
stack backtrace:
CPU: 4 PID: 1997 Comm: kworker/4:0 Not tainted 5.12.0-rc6+ #515
Workqueue: ipv6_addrconf addrconf_verify_work
Call Trace:
dump_stack+0xa4/0xe5
___might_sleep+0x27d/0x2b0
__mutex_lock+0xc8/0x13f0
? lock_downgrade+0x690/0x690
? __ipv6_dev_mc_dec+0x49/0x2a0
? mark_held_locks+0xb7/0x120
? mutex_lock_io_nested+0x1270/0x1270
? lockdep_hardirqs_on_prepare+0x12c/0x3e0
? _raw_spin_unlock_irqrestore+0x47/0x50
? trace_hardirqs_on+0x41/0x120
? __wake_up_common_lock+0xc9/0x100
? __wake_up_common+0x620/0x620
? memset+0x1f/0x40
? netlink_broadcast_filtered+0x2c4/0xa70
? __ipv6_dev_mc_dec+0x49/0x2a0
__ipv6_dev_mc_dec+0x49/0x2a0
? netlink_broadcast_filtered+0x2f6/0xa70
addrconf_leave_solict.part.64+0xad/0xf0
? addrconf_join_solict.part.63+0xf0/0xf0
? nlmsg_notify+0x63/0x1b0
__ipv6_ifa_notify+0x22c/0x9c0
? inet6_fill_ifaddr+0xbe0/0xbe0
? lockdep_hardirqs_on_prepare+0x12c/0x3e0
? __local_bh_enable_ip+0xa5/0xf0
? ipv6_del_addr+0x347/0x870
ipv6_del_addr+0x3b1/0x870
? addrconf_ifdown+0xfe0/0xfe0
? rcu_read_lock_any_held.part.27+0x20/0x20
addrconf_verify_rtnl+0x8a9/0xc60
addrconf_verify_work+0xf/0x20
process_one_work+0x84c/0x1440
In order to avoid this problem, it uses rcu_read_unlock_bh() for
a short time. RCU is used for avoiding freeing
ifp(struct *inet6_ifaddr) while ifp is being used. But this will
not be released even if rcu_read_unlock_bh() is used.
Because before rcu_read_unlock_bh(), it uses in6_ifa_hold(ifp).
So this is safe.
Fixes: 63ed8de4be ("mld: add mc_lock for protecting per-interface mld data")
Suggested-by: Eric Dumazet <edumazet@google.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP_CONGESTION is set for all subflows.
The mptcp socket gains icsk_ca_ops too so it can be used to keep the
authoritative state that should be set on new/future subflows.
TCP_INFO will return first subflow only.
The out-of-tree kernel has a MPTCP_INFO getsockopt, this could be added
later on.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle SO_DEBUG and set it on all subflows.
Ignore those values not implemented on TCP sockets.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replicate to all subflows.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Value is synced to all subflows.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to PRIORITY/KEEPALIVE: needs to be mirrored to all subflows.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to previous patch: needs to be mirrored to all subflows.
Device bind is simpler: it is only done on the initial (listener) sk.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
start with something simple: both take an integer value, both
need to be mirrored to all subflows.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni suggested to avoid re-syncing new subflows because
they inherit options from listener. In case options were set on
listener but are not set on mptcp-socket there is no need to
do any synchronisation for new subflows.
This change sets sockopt_seq of new mptcp sockets to the seq of
the mptcp listener sock.
Subflow sequence is set to the embedded tcp listener sk.
Add a comment explaing why sk_state is involved in sockopt_seq
generation.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle following cases:
1. setsockopt is called with multiple subflows.
Change might have to be mirrored to all of them.
This is done directly in process context/setsockopt call.
2. Outgoing subflow is created after one or several setsockopt()
calls have been made. Old setsockopt changes should be
synced to the new socket.
3. Incoming subflow, after setsockopt call(s).
Cases 2 and 3 are handled right after the join list is spliced to the conn
list.
Not all sockopt values can be just be copied by value, some require
helper calls. Those can acquire socket lock (which can sleep).
If the join->conn list splicing is done from preemptible context,
synchronization can be done right away, otherwise its deferred to work
queue.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unrolling mcast state at msk dismantel time is bug prone, as
syzkaller reported:
======================================================
WARNING: possible circular locking dependency detected
5.11.0-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor905/8822 is trying to acquire lock:
ffffffff8d678fe8 (rtnl_mutex){+.+.}-{3:3}, at: ipv6_sock_mc_close+0xd7/0x110 net/ipv6/mcast.c:323
but task is already holding lock:
ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1600 [inline]
ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: mptcp6_release+0x57/0x130 net/mptcp/protocol.c:3507
which lock already depends on the new lock.
Instead we can simply forbid any mcast-related setsockopt.
Let's do the same with all other non supported sockopts.
Fixes: 717e79c867 ("mptcp: Add setsockopt()/getsockopt() socket operations")
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP sockopt implementation is going to be much
more big and complex soon. Let's move it to a different
source file.
No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change reverts commit 86581852d7 ("mptcp: forbit mcast-related sockopt on MPTCP sockets").
As announced in the cover letter of the mentioned patch above, the
following commits introduce a larger MPTCP sockopt implementation
refactor.
This time, we switch from a blocklist to an allowlist. This is safer for
the future where new sockoptions could be added while not being fully
supported with MPTCP sockets and thus causing unstabilities.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As explained in bugfix commit 6ab4c3117a ("net: bridge: don't notify
switchdev for local FDB addresses") as well as in this discussion:
https://lore.kernel.org/netdev/20210117193009.io3nungdwuzmo5f7@skbuf/
the switchdev notifiers for FDB entries managed to have a zero-day bug,
which was that drivers would not know what to do with local FDB entries,
because they were not told that they are local. The bug fix was to
simply not notify them of those addresses.
Let us now add the 'is_local' bit to bridge FDB entries, and make all
drivers ignore these entries by their own choice.
Co-developed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of having to add more and more arguments to
br_switchdev_fdb_call_notifiers, get rid of it and build the info
struct directly in br_switchdev_fdb_notify.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to store cmlen instead of len in cm->cmsg_len.
Fixes: 38ebcf5096 ("scm: optimize put_cmsg()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to pause statistics add stats for FEC.
The IEEE standard mandates two sets of counters:
- 30.5.1.1.17 aFECCorrectedBlocks
- 30.5.1.1.18 aFECUncorrectableBlocks
where block is a block of bits FEC operates on.
Each of these counters is defined per lane (PCS instance).
Multiple vendors provide number of corrected _bits_ rather
than/as well as blocks.
This set adds the 2 standard-based block counters and a extra
one for corrected bits.
Counters are exposed to user space via netlink in new attributes.
Each attribute carries an array of u64s, first element is
the total count, and the following ones are a per-lane break down.
Much like with pause stats the operation will not fail when driver
does not implement the get_fec_stats callback (nor can the driver
fail the operation by returning an error). If stats can't be
reported the relevant attributes will be empty.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor fec_prepare_data() a little bit to skip the body
of the function and exit on error. Currently the code
depends on the fact that we only have one call which
may fail between ethnl_ops_begin() and ethnl_ops_complete()
and simply saves the error code. This will get hairy with
the stats also being queried.
No functional changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calling two copy_to_user() for very small regions has very high overhead.
Switch to inlined unsafe_put_user() to save one stac/clac sequence,
and avoid copy_to_user().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
af_packet fanout uses RCU rules to ensure f->arr elements
are not dismantled before RCU grace period.
However, it lacks rcu accessors to make sure KCSAN and other tools
wont detect data races. Stupid compilers could also play games.
Fixes: dc99f60069 ("packet: Add fanout support.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: "Gong, Sishuai" <sishuai@purdue.edu>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some Ethernet switches might only be able to support disabling multicast
snooping globally, which is an issue for example when several bridges
span the same physical device and request contradictory settings.
Propagate the return value of br_mc_disabled_update() such that this
limitation is transmitted correctly to user-space.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
the commit 1ddc3229ad ("skbuff: remove some unnecessary operation
in skb_segment_list()") introduces an issue very similar to the
one already fixed by commit 53475c5dd8 ("net: fix use-after-free when
UDP GRO with shared fraglist").
If the GSO skb goes though skb_clone() and pskb_expand_head() before
entering skb_segment_list(), the latter will unshare the frag_list
skbs and will release the old list. With the reverted commit in place,
when skb_segment_list() completes, skb->next points to the just
released list, and later on the kernel will hit UaF.
Note that since commit e0e3070a9b ("udp: properly complete L4 GRO
over UDP tunnel packet") the critical scenario can be reproduced also
receiving UDP over vxlan traffic with:
NIC (NETIF_F_GRO_FRAGLIST enabled) -> vxlan -> UDP sink
Attaching a packet socket to the NIC will cause skb_clone() and the
tunnel decapsulation will call pskb_expand_head().
Fixes: 1ddc3229ad ("skbuff: remove some unnecessary operation in skb_segment_list()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2021-04-14
Not much this time:
1) Simplification of some variable calculations in esp4 and esp6.
From Jiapeng Chong and Junlin Yang.
2) Fix a clang Wformat warning in esp6 and ah6.
From Arnd Bergmann.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The intention was for pause statistics to not be reported
when driver does not have the relevant callback (only
report an empty netlink nest). What happens currently
we report all 0s instead. Make sure statistics are
initialized to "not set" (which is -1) so the dumping
code skips them.
Fixes: 9a27a33027 ("ethtool: add standard pause stats")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Capture error codes in @ret, which is passed to the send_err
tracepoint, so that they can be logged when something goes awry.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently if a major timeout value is reached, but the minor value has
not been reached, an ETIMEOUT will not be sent back to the caller.
This can occur if the v4 server is not responding to requests and
retrans is configured larger than the default of two.
For example, A TCP mount with a configured timeout value of 50 and a
retransmission count of 3 to a v4 server which is not responding:
1. Initial value and increment set to 5s, maxval set to 20s, retries at 3
2. Major timeout is set to 20s, minor timeout set to 5s initially
3. xport_adjust_timeout() is called after 5s, retry with 10s timeout,
minor timeout is bumped to 10s
4. And again after another 10s, 15s total time with minor timeout set
to 15s
5. After 20s total time xport_adjust_timeout is called as major timeout is
reached, but skipped because the minor timeout is not reached
- After this time the cpu spins continually calling
xport_adjust_timeout() and returning 0 for 10 seconds.
As seen on perf sched:
39243.913182 [0005] mount.nfs[3794] 4607.938 0.017 9746.863
6. This continues until the 15s minor timeout condition is reached (in
this case for 10 seconds). After which the ETIMEOUT is processed
back to the caller, the cpu spinning stops, and normal operations
continue
Fixes: 7de62bc09f ("SUNRPC dont update timeout value on connection reset")
Signed-off-by: Chris Dion <Christopher.Dion@dell.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This tracepoint can crash when dereferencing snd_task because
when some transports connect, they put a cookie in that field
instead of a pointer to an rpc_task.
BUG: KASAN: use-after-free in trace_event_raw_event_xprt_writelock_event+0x141/0x18e [sunrpc]
Read of size 2 at addr ffff8881a83bd3a0 by task git/331872
CPU: 11 PID: 331872 Comm: git Tainted: G S 5.12.0-rc2-00007-g3ab6e585a7f9 #1453
Hardware name: Supermicro SYS-6028R-T/X10DRi, BIOS 1.1a 10/16/2015
Call Trace:
dump_stack+0x9c/0xcf
print_address_description.constprop.0+0x18/0x239
kasan_report+0x174/0x1b0
trace_event_raw_event_xprt_writelock_event+0x141/0x18e [sunrpc]
xprt_prepare_transmit+0x8e/0xc1 [sunrpc]
call_transmit+0x4d/0xc6 [sunrpc]
Fixes: 9ce07ae5eb ("SUNRPC: Replace dprintk() call site in xprt_prepare_transmit")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
A separate tracepoint can be left enabled all the time to capture
rare but important retransmission events. So for example:
kworker/u26:3-568 [009] 156.967933: xprt_retransmit: task:44093@5 xid=0xa25dbc79 nfsv3 WRITE ntrans=2
Or, for example, enable all nfs and nfs4 tracepoints, and set up a
trigger to disable tracing when xprt_retransmit fires to capture
everything that leads up to it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
I've hit some crashes that occur in the xprt_rdma_inject_disconnect
path. It appears that, for some provides, rdma_disconnect() can
take so long that the transport can disconnect and release its
hardware resources while rdma_disconnect() is still running,
resulting in a UAF in the provider.
The transport's fault injection method may depend on the stability
of transport data structures. That means it needs to be invoked
only from contexts that hold the transport write lock.
Fixes: 4a06825839 ("SUNRPC: Transport fault injection")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
After commit 0f6925b3e8 ("virtio_net: Do not pull payload in skb->head")
Guenter Roeck reported one failure in his tests using sh architecture.
After much debugging, we have been able to spot silent unaligned accesses
in inet_gro_receive()
The issue at hand is that upper networking stacks assume their header
is word-aligned. Low level drivers are supposed to reserve NET_IP_ALIGN
bytes before the Ethernet header to make that happen.
This patch hardens skb_gro_reset_offset() to not allow frag0 fast-path
if the fragment is not properly aligned.
Some arches like x86, arm64 and powerpc do not care and define NET_IP_ALIGN
as 0, this extra check will be a NOP for them.
Note that if frag0 is not used, GRO will call pskb_may_pull()
as many times as needed to pull network and transport headers.
Fixes: 0f6925b3e8 ("virtio_net: Do not pull payload in skb->head")
Fixes: 78a478d0ef ("gro: Inline skb_gro_header and cache frag0 virtual address")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock
held and sp->do_auto_asconf is true, then an element is removed
from the auto_asconf_splist without any proper locking.
This can happen in the following functions:
1. In sctp_accept, if sctp_sock_migrate fails.
2. In inet_create or inet6_create, if there is a bpf program
attached to BPF_CGROUP_INET_SOCK_CREATE which denies
creation of the sctp socket.
The bug is fixed by acquiring addr_wq_lock in sctp_destroy_sock
instead of sctp_close.
This addresses CVE-2021-23133.
Reported-by: Or Cohen <orcohen@paloaltonetworks.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Fixes: 6102365876 ("bpf: Add new cgroup attach type to enable sock modifications")
Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, tcp_allowed_congestion_control is global and writable;
writing to it in any net namespace will leak into all other net
namespaces.
tcp_available_congestion_control and tcp_allowed_congestion_control are
the only sysctls in ipv4_net_table (the per-netns sysctl table) with a
NULL data pointer; their handlers (proc_tcp_available_congestion_control
and proc_allowed_congestion_control) have no other way of referencing a
struct net. Thus, they operate globally.
Because ipv4_net_table does not use designated initializers, there is no
easy way to fix up this one "bad" table entry. However, the data pointer
updating logic shouldn't be applied to NULL pointers anyway, so we
instead force these entries to be read-only.
These sysctls used to exist in ipv4_table (init-net only), but they were
moved to the per-net ipv4_net_table, presumably without realizing that
tcp_allowed_congestion_control was writable and thus introduced a leak.
Because the intent of that commit was only to know (i.e. read) "which
congestion algorithms are available or allowed", this read-only solution
should be sufficient.
The logic added in recent commit
31c4d2f160: ("net: Ensure net namespace isolation of sysctls")
does not and cannot check for NULL data pointers, because
other table entries (e.g. /proc/sys/net/netfilter/nf_log/) have
.data=NULL but use other methods (.extra2) to access the struct net.
Fixes: 9cb8e048e5 ("net/ipv4/sysctl: show tcp_{allowed, available}_congestion_control in non-initial netns")
Signed-off-by: Jonathon Reinhart <jonathon.reinhart@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current icmp_rcv function drops all unknown ICMP types, including
ICMP_EXT_ECHOREPLY (type 43). In order to parse Extended Echo Reply messages, we have
to pass these packets to the ping_rcv function, which does not do any
other filtering and passes the packet to the designated socket.
Pass incoming RFC 8335 ICMP Extended Echo Reply packets to the ping_rcv
handler instead of discarding the packet.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
of_get_mac_address() returns a "const void*" pointer to a MAC address.
Lately, support to fetch the MAC address by an NVMEM provider was added.
But this will only work with platform devices. It will not work with
PCI devices (e.g. of an integrated root complex) and esp. not with DSA
ports.
There is an of_* variant of the nvmem binding which works without
devices. The returned data of a nvmem_cell_read() has to be freed after
use. On the other hand the return of_get_mac_address() points to some
static data without a lifetime. The trick for now, was to allocate a
device resource managed buffer which is then returned. This will only
work if we have an actual device.
Change it, so that the caller of of_get_mac_address() has to supply a
buffer where the MAC address is written to. Unfortunately, this will
touch all drivers which use the of_get_mac_address().
Usually the code looks like:
const char *addr;
addr = of_get_mac_address(np);
if (!IS_ERR(addr))
ether_addr_copy(ndev->dev_addr, addr);
This can then be simply rewritten as:
of_get_mac_address(np, ndev->dev_addr);
Sometimes is_valid_ether_addr() is used to test the MAC address.
of_get_mac_address() already makes sure, it just returns a valid MAC
address. Thus we can just test its return code. But we have to be
careful if there are still other sources for the MAC address before the
of_get_mac_address(). In this case we have to keep the
is_valid_ether_addr() call.
The following coccinelle patch was used to convert common cases to the
new style. Afterwards, I've manually gone over the drivers and fixed the
return code variable: either used a new one or if one was already
available use that. Mansour Moufid, thanks for that coccinelle patch!
<spml>
@a@
identifier x;
expression y, z;
@@
- x = of_get_mac_address(y);
+ x = of_get_mac_address(y, z);
<...
- ether_addr_copy(z, x);
...>
@@
identifier a.x;
@@
- if (<+... x ...+>) {}
@@
identifier a.x;
@@
if (<+... x ...+>) {
...
}
- else {}
@@
identifier a.x;
expression e;
@@
- if (<+... x ...+>@e)
- {}
- else
+ if (!(e))
{...}
@@
expression x, y, z;
@@
- x = of_get_mac_address(y, z);
+ of_get_mac_address(y, z);
... when != x
</spml>
All drivers, except drivers/net/ethernet/aeroflex/greth.c, were
compile-time tested.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to the sit case, we need to remove the tunnels with no
addresses that have been moved to another network namespace.
Fixes: 0bd8762824 ("ip6tnl: add x-netns support")
Signed-off-by: Hristo Venev <hristo@venev.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
A sit interface created without a local or a remote address is linked
into the `sit_net::tunnels_wc` list of its original namespace. When
deleting a network namespace, delete the devices that have been moved.
The following script triggers a null pointer dereference if devices
linked in a deleted `sit_net` remain:
for i in `seq 1 30`; do
ip netns add ns-test
ip netns exec ns-test ip link add dev veth0 type veth peer veth1
ip netns exec ns-test ip link add dev sit$i type sit dev veth0
ip netns exec ns-test ip link set dev sit$i netns $$
ip netns del ns-test
done
for i in `seq 1 30`; do
ip link del dev sit$i
done
Fixes: 5e6700b3bf ("sit: add support of x-netns")
Signed-off-by: Hristo Venev <hristo@venev.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
It could be xmit type was not set and would default to FLOW_OFFLOAD_XMIT_NEIGH
and in this type the gc expect to have a route info.
Fix that by adding FLOW_OFFLOAD_XMIT_UNSPEC which defaults to 0.
Fixes: 8b9229d158 ("netfilter: flowtable: dst_check() from garbage collector path")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
log_invalid sysctl allows values of 0 to 255 inclusive so we no longer
need a range check: the min/max values can be removed.
This also removes all member variables that were moved to net_generic
data in previous patches.
This reduces size of netns_ct struct by one cache line.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Its only needed from slowpath (sysctl, ctnetlink, gc worker) and
when a new conntrack object is allocated.
Furthermore, each write dirties the otherwise read-mostly pernet
data in struct net.ct, which are accessed from packet path.
Move it to the net_generic data. This makes struct netns_ct
read-mostly.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Creation of a new conntrack entry isn't a frequent operation (compared
to 'ct entry already exists'). Creation of a new entry that is also an
expected (related) connection even less so.
Place this counter in net_generic data.
A followup patch will also move the conntrack count -- this will make
netns_ct a read-mostly structure.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
While at it, make it an u8, no need to use an integer for a boolean.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Not accessed in fast path, place this is generic_net data instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds vlan pop action offload in the flowtable offload.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds support for vlan_id, vlan_priority and vlan_proto match
for flowtable offload.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix NAT IPv6 offload in the flowtable.
2) icmpv6 is printed as unknown in /proc/net/nf_conntrack.
3) Use div64_u64() in nft_limit, from Eric Dumazet.
4) Use pre_exit to unregister ebtables and arptables hooks,
from Florian Westphal.
5) Fix out-of-bound memset in x_tables compat match/target,
also from Florian.
6) Clone set elements expression to ensure proper initialization.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
For some HCAs, ib_modify_qp() is an expensive operation running
virtualized.
For both the active and passive side, the QP returned by the CM has the
state set to RTS, so no need for this excess RTS -> RTS transition. With
IB Core's ability to set the RNR Retry timer, we use this interface to
shave off another ib_modify_qp().
Fixes: ec16227e14 ("RDS/IB: Infiniband transport")
Link: https://lore.kernel.org/r/1617216194-12890-3-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
xt_compat_match/target_from_user doesn't check that zeroing the area
to start of next rule won't write past end of allocated ruleset blob.
Remove this code and zero the entire blob beforehand.
Reported-by: syzbot+cfc0247ac173f597aaaa@syzkaller.appspotmail.com
Reported-by: Andy Nguyen <theflow@google.com>
Fixes: 9fa492cdc1 ("[NETFILTER]: x_tables: simplify compat API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add missing 't' in attrtype.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
These sysctls point to global variables:
- NF_SYSCTL_CT_MAX (&nf_conntrack_max)
- NF_SYSCTL_CT_EXPECT_MAX (&nf_ct_expect_max)
- NF_SYSCTL_CT_BUCKETS (&nf_conntrack_htable_size_user)
Because their data pointers are not updated to point to per-netns
structures, they must be marked read-only in a non-init_net ns.
Otherwise, changes in any net namespace are reflected in (leaked into)
all other net namespaces. This problem has existed since the
introduction of net namespaces.
The current logic marks them read-only only if the net namespace is
owned by an unprivileged user (other than init_user_ns).
Commit d0febd81ae ("netfilter: conntrack: re-visit sysctls in
unprivileged namespaces") "exposes all sysctls even if the namespace is
unpriviliged." Since we need to mark them readonly in any case, we can
forego the unprivileged user check altogether.
Fixes: d0febd81ae ("netfilter: conntrack: re-visit sysctls in unprivileged namespaces")
Signed-off-by: Jonathon Reinhart <Jonathon.Reinhart@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds an ensure_safe_net_sysctl() check during register_net_sysctl()
to validate that sysctl table entries for a non-init_net netns are
sufficiently isolated. To be netns-safe, an entry must adhere to at
least (and usually exactly) one of these rules:
1. It is marked read-only inside the netns.
2. Its data pointer does not point to kernel/module global data.
An entry which fails both of these checks is indicative of a bug,
whereby a child netns can affect global net sysctl values.
If such an entry is found, this code will issue a warning to the kernel
log, and force the entry to be read-only to prevent a leak.
To test, simply create a new netns:
$ sudo ip netns add dummy
As it sits now, this patch will WARN for two sysctls which will be
addressed in a subsequent patch:
- /proc/sys/net/netfilter/nf_conntrack_max
- /proc/sys/net/netfilter/nf_conntrack_expect_max
Signed-off-by: Jonathon Reinhart <Jonathon.Reinhart@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a comment spelling mistake "interfarence" -> "interference" in
function parse_nla_action(). Fix it.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
The last refcnt of the psock can be gone right after
sock_map_remove_links(), so sk_psock_stop() could trigger a UAF.
The reason why I placed sk_psock_stop() there is to avoid RCU read
critical section, and more importantly, some callee of
sock_map_remove_links() is supposed to be called with RCU read lock,
we can not simply get rid of RCU read lock here. Therefore, the only
choice we have is to grab an additional refcnt with sk_psock_get()
and put it back after sk_psock_stop().
Fixes: 799aa7f98d ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Reported-by: syzbot+7b6548ae483d6f4c64ae@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210408030556.45134-1-xiyou.wangcong@gmail.com
If the device has a sfp bus attached, call its
sfp_get_module_eeprom_by_page() function, otherwise use the ethtool op
for the device. This follows how the IOCTL works.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case netlink get_module_eeprom_by_page() callback is not implemented
by the driver, try to call old get_module_info() and get_module_eeprom()
pair. Recalculate parameters to get_module_eeprom() offset and len using
page number and their sizes. Return error if this can't be done.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two ways to retrieve information from SFP EEPROMs. Many
devices make use of the common code, and assign the sfp_bus pointer in
the netdev to point to the bus holding the SFP device. Some MAC
drivers directly implement ops in there ethool structure.
Export within net/ethtool the two helpers used to call these methods,
so that they can also be used in the new netlink code.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define get_module_eeprom_by_page() ethtool callback and implement
netlink infrastructure.
get_module_eeprom_by_page() allows network drivers to dump a part of
module's EEPROM specified by page and bank numbers along with offset and
length. It is effectively a netlink replacement for get_module_info()
and get_module_eeprom() pair, which is needed due to emergence of
complex non-linear EEPROM layouts.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Same problem that also existed in iptables/ip(6)tables, when
arptable_filter is removed there is no longer a wait period before the
table/ruleset is free'd.
Unregister the hook in pre_exit, then remove the table in the exit
function.
This used to work correctly because the old nf_hook_unregister API
did unconditional synchronize_net.
The per-net hook unregister function uses call_rcu instead.
Fixes: b9e69e1273 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Just like ip/ip6/arptables, the hooks have to be removed, then
synchronize_rcu() has to be called to make sure no more packets are being
processed before the ruleset data is released.
Place the hook unregistration in the pre_exit hook, then call the new
ebtables pre_exit function from there.
Years ago, when first netns support got added for netfilter+ebtables,
this used an older (now removed) netfilter hook unregister API, that did
a unconditional synchronize_rcu().
Now that all is done with call_rcu, ebtable_{filter,nat,broute} pernet exit
handlers may free the ebtable ruleset while packets are still in flight.
This can only happens on module removal, not during netns exit.
The new function expects the table name, not the table struct.
This is because upcoming patch set (targeting -next) will remove all
net->xt.{nat,filter,broute}_table instances, this makes it necessary
to avoid external references to those member variables.
The existing APIs will be converted, so follow the upcoming scheme of
passing name + hook type instead.
Fixes: aee12a0a37 ("ebtables: remove nf_hook_register usage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DCCP is virtually never used, so no need to use space in struct net for it.
Put the pernet ipv4/v6 socket in the dccp ipv4/ipv6 modules instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20210408174502.1625-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
napi_disable() is subject to an hangup, when the threaded
mode is enabled and the napi is under heavy traffic.
If the relevant napi has been scheduled and the napi_disable()
kicks in before the next napi_threaded_wait() completes - so
that the latter quits due to the napi_disable_pending() condition,
the existing code leaves the NAPI_STATE_SCHED bit set and the
napi_disable() loop waiting for such bit will hang.
This patch addresses the issue by dropping the NAPI_STATE_DISABLE
bit test in napi_thread_wait(). The later napi_threaded_poll()
iteration will take care of clearing the NAPI_STATE_SCHED.
This also addresses a related problem reported by Jakub:
before this patch a napi_disable()/napi_enable() pair killed
the napi thread, effectively disabling the threaded mode.
On the patched kernel napi_disable() simply stops scheduling
the relevant thread.
v1 -> v2:
- let the main napi_thread_poll() loop clear the SCHED bit
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 29863d41bb ("net: implement threaded-able napi poll loop support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/883923fa22745a9589e8610962b7dc59df09fb1f.1617981844.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nlh is being checked for validtity two times when it is dereferenced in
this function. Check for validity again when updating the flags through
nlh pointer to make the dereferencing safe.
CC: <stable@vger.kernel.org>
Addresses-Coverity: ("NULL pointer dereference")
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
- Proper support for BCM4330 and BMC4334
- Various improvements for firmware download of Intel controllers
- Update management interface revision to 20
- Support for AOSP HCI vendor commands
- Initial Virtio support
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAmBvL7UZHGx1aXoudm9u
LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKU+eD/4qGiwnwQVia4hjnQ5PZ0c/
sBmZvzzZE43RNRvy8gAwcVLypLaiIkEYml4ruVdF6RGoqaDA6kRB7D0tdk8EtZc4
6h72LX0zefnyZNj/Fcl6+dKuq7bSHjdOK0G+oXFmpvYfScPsI6Oq0ntpYOFYwUE0
cDdeZyb/sW4f6L5AXUgLjD9AIjzlBOJEU5HcRL/uY+E/fH1oe757/IhUDerXjTIh
9EhY28mrI7KeoEcJ1NIgvjPnRCxPRLAKgrzc8NXkUsLeNZSIywrwjgRfTvCZ+qQf
g/MmNv+n7yFlUzA7Fu2d8YAgRtgF9nZc45geqOSHqcSZURORSs0CzEoYinqwT7f0
xdMBi/UoSzJsLksgv+OfXOyoQ4lPNJ47pcH/edmT/ZJ/Ai2yTqUUSODHQ3MLC4Dp
kQj34thQvfTf5b6+9HwKmBjlfMK0QGPqWjp6dth2bzos/ugurDP+XimAv0urvFz+
NkES5kCMUs/1z7Yh+Nj1MyU3Wfdwol0wOh+PXBTAw2fxSy6kmKYGyLw7HEdWegB0
K2w/ZS58g0EGK89ZSiqlZKmXtAd22dQqS6JlZje+9YTtEtRWu+rAF1dddS8vJDjl
Rq3VSQ1B6Qw0rdGpyfxdgm/sWwq5S1YgQQcAZgVaeo9ZiIhfscVD5v5L0Ol6k9ms
3eCK/2brsX0IaV61eVnoOw==
=jiCz
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2021-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Proper support for BCM4330 and BMC4334
- Various improvements for firmware download of Intel controllers
- Update management interface revision to 20
- Support for AOSP HCI vendor commands
- Initial Virtio support
====================
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2021-04-08
The following pull-request contains BPF updates for your *net* tree.
We've added 4 non-merge commits during the last 2 day(s) which contain
a total of 4 files changed, 31 insertions(+), 10 deletions(-).
The main changes are:
1) Validate and reject invalid JIT branch displacements, from Piotr Krysiuk.
2) Fix incorrect unhash restore as well as fwd_alloc memory accounting in
sock map, from John Fastabend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* S1G beacon validation
* potential leak in nl80211
* fast-RX confusion with 4-addr mode
* erroneous WARN_ON that userspace can trigger
* wrong time units in virt_wifi
* rfkill userspace API breakage
* TXQ AC confusing that led to traffic stopped forever
* connection monitoring time after/before confusion
* netlink beacon head validation buffer overrun
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAmBvFsAACgkQB8qZga/f
l8QJRA//f7HTL6lgRMck229bKoKUO9ICRGifYdAZfIwFBzNZguBPwxiUeIZ0rFWf
LDJgee+QsKv7YkVoUXYX0K7vA9DXbadcDWgQqB8pJrxjpibvxUtF2fA0YPEftrLu
1cCl9dgtJHaZF+SZKbEEUpDz19gZtSMTRdbJXLyhGWcZ+itXX6cFoa8hCWMxwWVi
cftZJl1lXqJVzJTr/4/lENt51dwvha/z4jZodnTl2PZjOFrho4/L5UbJ7FlTmbg4
FiI9fpI+VCd6VJO/o5g8v6i7QMI0yJ1eMjuFYcOmDzagJqxD6diU31U/hpi94DGI
Fw2RCWTMk2S8ol6SszvyIvt5GD6YM28MFJo69uBd6U30QjynvxDbHBqzpbd23Sqe
34QlHOfn+WbMK1DOAAEeTrYeRsm9dem9DSkAW0uf9YrTQF0E3HyJAMX6Zgd1h3Ic
lWk3f/h9GiD4u/cK9vhISylu5e12F84sYND1Nk5yeMN/ihzyWAQGQiQN7pS2crvX
JBzv2obMqiUeW6LPtaiPzCBrkdTnQ8kgHwuuagmKhLwF2vDVyQJEitmeVGHl/FdV
O+89KodIVGHXd17cK9ddRieg8Fp8ecKCqxv/+aNN7Rsda/6mQPGTaVSFk/++FI6Q
h8NMWi5qVqHShYWcF8Q1FMdPwBOeW/pZs5iqKYhp+60qTGDc9LU=
=rGEc
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2021-04-08.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes berg says:
====================
Various small fixes:
* S1G beacon validation
* potential leak in nl80211
* fast-RX confusion with 4-addr mode
* erroneous WARN_ON that userspace can trigger
* wrong time units in virt_wifi
* rfkill userspace API breakage
* TXQ AC confusing that led to traffic stopped forever
* connection monitoring time after/before confusion
* netlink beacon head validation buffer overrun
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- for kerneldoc in batadv_priv, by Linus Luessing
- drop unused header preempt.h, by Sven Eckelmann
- Fix misspelled "wont", by Sven Eckelmann
-----BEGIN PGP SIGNATURE-----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=dg37
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20210408' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- for kerneldoc in batadv_priv, by Linus Luessing
- drop unused header preempt.h, by Sven Eckelmann
- Fix misspelled "wont", by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Setting iftoken can fail for several different reasons but there
and there was no report to user as to the cause. Add netlink
extended errors to the processing of the request.
This requires adding additional argument through rtnl_af_ops
set_link_af callback.
Reported-by: Hongren Zheng <li@zenithal.me>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
With recent changes that separated action module load from action
initialization tcf_action_init() function error handling code was modified
to manually release the loaded modules if loading/initialization of any
further action in same batch failed. For the case when all modules
successfully loaded and some of the actions were initialized before one of
them failed in init handler. In this case for all previous actions the
module will be released twice by the error handler: First time by the loop
that manually calls module_put() for all ops, and second time by the action
destroy code that puts the module after destroying the action.
Reproduction:
$ sudo tc actions add action simple sdata \"2\" index 2
$ sudo tc actions add action simple sdata \"1\" index 1 \
action simple sdata \"2\" index 2
RTNETLINK answers: File exists
We have an error talking to the kernel
$ sudo tc actions ls action simple
total acts 1
action order 0: Simple <"2">
index 2 ref 1 bind 0
$ sudo tc actions flush action simple
$ sudo tc actions ls action simple
$ sudo tc actions add action simple sdata \"2\" index 2
Error: Failed to load TC action module.
We have an error talking to the kernel
$ lsmod | grep simple
act_simple 20480 -1
Fix the issue by modifying module reference counting handling in action
initialization code:
- Get module reference in tcf_idr_create() and put it in tcf_idr_release()
instead of taking over the reference held by the caller.
- Modify users of tcf_action_init_1() to always release the module
reference which they obtain before calling init function instead of
assuming that created action takes over the reference.
- Finally, modify tcf_action_init_1() to not release the module reference
when overwriting existing action as this is no longer necessary since both
upper and lower layers obtain and manage their own module references
independently.
Fixes: d349f99768 ("net_sched: fix RTNL deadlock again caused by request_module()")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
