When a TCP socket gets inserted into a sockmap, its sk_prot callbacks get
replaced with tcp_bpf callbacks built from regular tcp callbacks. If TLS
gets enabled on the same socket, sk_prot callbacks get replaced once again,
this time with kTLS callbacks built from tcp_bpf callbacks.
Now, we allow removing a socket from a sockmap that has kTLS enabled. After
removal, socket remains with kTLS configured. This is where things things
get tricky.
Since the socket has a set of sk_prot callbacks that are a mix of kTLS and
tcp_bpf callbacks, we need to restore just the tcp_bpf callbacks to the
original ones. At the moment, it comes down to the the unhash operation.
We had a regression recently because tcp_bpf callbacks were not cleared in
this particular scenario of removing a kTLS socket from a sockmap. It got
fixed in commit 4da6a196f9 ("bpf: Sockmap/tls, during free we may call
tcp_bpf_unhash() in loop").
Add a test that triggers the regression so that we don't reintroduce it in
the future.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200217121530.754315-4-jakub@cloudflare.com
Commit 7e81a35302 ("bpf: Sockmap, ensure sock lock held during tear
down") introduced sleeping issues inside RCU critical sections and while
holding a spinlock on sockmap/sockhash tear-down. There has to be at least
one socket in the map for the problem to surface.
This adds a test that triggers the warnings for broken locking rules. Not a
fix per se, but rather tooling to verify the accompanying fixes. Run on a
VM with 1 vCPU to reproduce the warnings.
Fixes: 7e81a35302 ("bpf: Sockmap, ensure sock lock held during tear down")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200206111652.694507-4-jakub@cloudflare.com
There's limit of 40 programs tht can be attached
to trampoline for one function. Adding test that
tries to attach that many plus one extra that needs
to fail.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200123161508.915203-4-jolsa@kernel.org
Currently, there is a lot of false positives if a single reuseport test
fails. This is because expected_results and the result map are not cleared.
Zero both after individual test runs, which fixes the mentioned false
positives.
Fixes: 91134d849a ("bpf: Test BPF_PROG_TYPE_SK_REUSEPORT")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200124112754.19664-5-lmb@cloudflare.com
Include the name of the mismatching result in human readable format
when reporting an error. The new output looks like the following:
unexpected result
result: [1, 0, 0, 0, 0, 0]
expected: [0, 0, 0, 0, 0, 0]
mismatch on DROP_ERR_INNER_MAP (bpf_prog_linum:153)
check_results:FAIL:382
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200124112754.19664-4-lmb@cloudflare.com
The 'duration' variable is referenced in the CHECK() macro, and there are
some uses of the macro before 'duration' is set. The clang compiler
(validly) complains about this.
Sample error:
.../selftests/bpf/prog_tests/fexit_test.c:23:6: warning: variable 'duration' is uninitialized when used here [-Wuninitialized]
if (CHECK(err, "prog_load sched cls", "err %d errno %d\n", err, errno))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../selftests/bpf/test_progs.h:134:25: note: expanded from macro 'CHECK'
if (CHECK(err, "prog_load sched cls", "err %d errno %d\n", err, errno))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_CHECK(condition, tag, duration, format)
^~~~~~~~
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200123235144.93610-1-sdf@google.com
This patch adds a bpf_cubic example. Some highlights:
1. CONFIG_HZ .kconfig map is used.
2. In bictcp_update(), calculation is changed to use usec
resolution (i.e. USEC_PER_JIFFY) instead of using jiffies.
Thus, usecs_to_jiffies() is not used in the bpf_cubic.c.
3. In bitctcp_update() [under tcp_friendliness], the original
"while (ca->ack_cnt > delta)" loop is changed to the equivalent
"ca->ack_cnt / delta" operation.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200122233658.903774-1-kafai@fb.com
Add program extension tests that build on top of fexit_bpf2bpf tests.
Replace three global functions in previously loaded test_pkt_access.c program
with three new implementations:
int get_skb_len(struct __sk_buff *skb);
int get_constant(long val);
int get_skb_ifindex(int val, struct __sk_buff *skb, int var);
New function return the same results as original only if arguments match.
new_get_skb_ifindex() demonstrates that 'skb' argument doesn't have to be first
and only argument of BPF program. All normal skb based accesses are available.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200121005348.2769920-4-ast@kernel.org
Fix all selftests to include libbpf header files with the bpf/ prefix, to
be consistent with external users of the library. Also ensure that all
includes of exported libbpf header files (those that are exported on 'make
install' of the library) use bracketed includes instead of quoted.
To not break the build, keep the old include path until everything has been
changed to the new one; a subsequent patch will remove that.
Fixes: 6910d7d386 ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560568.1683545.9649335788846513446.stgit@toke.dk
The same with commit 4e59afbbed ("selftests/bpf: skip nmi test when perf
hw events are disabled"), it would make more sense to skip the
test_stacktrace_build_id_nmi test if the setup (e.g. virtual machines) has
disabled hardware perf events.
Fixes: 13790d1cc7 ("bpf: add selftest for stackmap with build_id in NMI context")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200117100656.10359-1-liuhangbin@gmail.com
Alexei observed that test_progs send_signal may fail if run
with command line "./test_progs" and the tests will pass
if just run "./test_progs -n 40".
I observed similar issue with nmi subtest failure
and added a delay 100 us in Commit ab8b7f0cb3
("tools/bpf: Add self tests for bpf_send_signal_thread()")
and the problem is gone for me. But the issue still exists
in Alexei's testing environment.
The current code uses sample_freq = 50 (50 events/second), which
may not be enough. But if the sample_freq value is larger than
sysctl kernel/perf_event_max_sample_rate, the perf_event_open
syscall will fail.
This patch changed nmi perf testing to use sample_period = 1,
which means trying to sampling every event. This seems fixing
the issue.
Fixes: ab8b7f0cb3 ("tools/bpf: Add self tests for bpf_send_signal_thread()")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200116174004.1522812-1-yhs@fb.com
Add a test that will attach a FENTRY and FEXIT program to the XDP test
program. It will also verify data from the XDP context on FENTRY and
verifies the return code on exit.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157909410480.47481.11202505690938004673.stgit@xdp-tutorial
The test_progs send_signal() is amended to test
bpf_send_signal_thread() as well.
$ ./test_progs -n 40
#40/1 send_signal_tracepoint:OK
#40/2 send_signal_perf:OK
#40/3 send_signal_nmi:OK
#40/4 send_signal_tracepoint_thread:OK
#40/5 send_signal_perf_thread:OK
#40/6 send_signal_nmi_thread:OK
#40 send_signal:OK
Summary: 1/6 PASSED, 0 SKIPPED, 0 FAILED
Also took this opportunity to rewrite the send_signal test
using skeleton framework and array mmap to make code
simpler and more readable.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115035003.602425-1-yhs@fb.com
test_global_func[12] - check 512 stack limit.
test_global_func[34] - check 8 frame call chain limit.
test_global_func5 - check that non-ctx pointer cannot be passed into
a function that expects context.
test_global_func6 - check that ctx pointer is unmodified.
test_global_func7 - check that global function returns scalar.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200110064124.1760511-7-ast@kernel.org
test results:
pyperf50 with always_inlined the same function five times: processed 46378 insns
pyperf50 with global function: processed 6102 insns
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200110064124.1760511-5-ast@kernel.org
Add simple fexit prog type to skb prog type test when subprogram is a global
function.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200110064124.1760511-4-ast@kernel.org
This patch adds a bpf_dctcp example. It currently does not do
no-ECN fallback but the same could be done through the cgrp2-bpf.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200109003517.3856825-1-kafai@fb.com
test_overhead changes task comm in order to estimate BPF trampoline
overhead but never sets the comm back to the original one.
We have the tests (like core_reloc.c) that have 'test_progs'
as hard-coded expected comm, so let's try to preserve the
original comm.
Currently, everything works because the order of execution is:
first core_recloc, then test_overhead; but let's make it a bit
future-proof.
Other related changes: use 'test_overhead' as new comm instead of
'test' to make it easy to debug and drop '\n' at the end.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Petar Penkov <ppenkov@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200108192132.189221-1-sdf@google.com
Test replacing a cgroup-bpf program attached with BPF_F_ALLOW_MULTI and
possible failure modes: invalid combination of flags, invalid
replace_bpf_fd, replacing a non-attachd to specified cgroup program.
Example of program replacing:
# gdb -q --args ./test_progs --name=cgroup_attach_multi
...
Breakpoint 1, test_cgroup_attach_multi () at cgroup_attach_multi.c:227
(gdb)
[1]+ Stopped gdb -q --args ./test_progs --name=cgroup_attach_multi
# bpftool c s /mnt/cgroup2/cgroup-test-work-dir/cg1
ID AttachType AttachFlags Name
2133 egress multi
2134 egress multi
# fg
gdb -q --args ./test_progs --name=cgroup_attach_multi
(gdb) c
Continuing.
Breakpoint 2, test_cgroup_attach_multi () at cgroup_attach_multi.c:233
(gdb)
[1]+ Stopped gdb -q --args ./test_progs --name=cgroup_attach_multi
# bpftool c s /mnt/cgroup2/cgroup-test-work-dir/cg1
ID AttachType AttachFlags Name
2139 egress multi
2134 egress multi
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/7b9b83e8d5fb82e15b034341bd40b6fb2431eeba.1576741281.git.rdna@fb.com
Convert test_cgroup_attach to prog_tests.
This change does a lot of things but in many cases it's pretty expensive
to separate them, so they go in one commit. Nevertheless the logic is
ketp as is and changes made are just moving things around, simplifying
them (w/o changing the meaning of the tests) and making prog_tests
compatible:
* split the 3 tests in the file into 3 separate files in prog_tests/;
* rename the test functions to test_<file_base_name>;
* remove unused includes, constants, variables and functions from every
test;
* replace `if`-s with or `if (CHECK())` where additional context should
be logged and with `if (CHECK_FAIL())` where line number is enough;
* switch from `log_err()` to logging via `CHECK()`;
* replace `assert`-s with `CHECK_FAIL()` to avoid crashing the whole
test_progs if one assertion fails;
* replace cgroup_helpers with test__join_cgroup() in
cgroup_attach_override only, other tests need more fine-grained
control for cgroup creation/deletion so cgroup_helpers are still used
there;
* simplify cgroup_attach_autodetach by switching to easiest possible
program since this test doesn't really need such a complicated program
as cgroup_attach_multi does;
* remove test_cgroup_attach.c itself.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/0ff19cc64d2dc5cf404349f07131119480e10e32.1576741281.git.rdna@fb.com
Fix two issues in test_attach_probe:
1. it was not able to parse /proc/self/maps beyond the first line,
since %s means parse string until white space.
2. offset has to be accounted for otherwise uprobed address is incorrect.
Fixes: 1e8611bbdf ("selftests/bpf: add kprobe/uprobe selftests")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191219020442.1922617-1-ast@kernel.org
Instead of all or nothing approach of overriding Kconfig file location, allow
to extend it with extra values and override chosen subset of values though
optional user-provided extra config, passed as a string through open options'
.kconfig option. If same config key is present in both user-supplied config
and Kconfig, user-supplied one wins. This allows applications to more easily
test various conditions despite host kernel's real configuration. If all of
BPF object's __kconfig externs are satisfied from user-supplied config, system
Kconfig won't be read at all.
Simplify selftests by not needing to create temporary Kconfig files.
Suggested-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191219002837.3074619-3-andriin@fb.com
allow to pass skb's mark field into bpf_prog_test_run ctx
for BPF_PROG_TYPE_SCHED_CLS prog type. that would allow
to test bpf programs which are doing decision based on this
field
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Embed contents of BPF object file used for BPF skeleton generation inside
skeleton itself. This allows to keep BPF object file and its skeleton in sync
at all times, and simpifies skeleton instantiation.
Also switch existing selftests to not require BPF_EMBED_OBJ anymore.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191218052552.2915188-2-andriin@fb.com
Add a set of tests validating libbpf-provided extern variables. One crucial
feature that's tested is dead code elimination together with using invalid BPF
helper. CONFIG_MISSING is not supposed to exist and should always be specified
by libbpf as zero, which allows BPF verifier to correctly do branch pruning
and not fail validation, when invalid BPF helper is called from dead if branch.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191214014710.3449601-5-andriin@fb.com
Add a simple selftests validating datasection-to-struct layour dumping. Global
variables are constructed in such a way as to cause both natural and
artificial padding (through custom alignment requirement).
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-17-andriin@fb.com
Convert few more selftests to use generated BPF skeletons as a demonstration
on how to use it.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-16-andriin@fb.com
Add APIs to get BPF program function name, as opposed to bpf_program__title(),
which returns BPF program function's section name. Function name has a benefit
of being a valid C identifier and uniquely identifies a specific BPF program,
while section name can be duplicated across multiple independent BPF programs.
Add also bpf_object__find_program_by_name(), similar to
bpf_object__find_program_by_title(), to facilitate looking up BPF programs by
their C function names.
Convert one of selftests to new API for look up.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-9-andriin@fb.com
Add a convenience macro BPF_EMBED_OBJ, which allows to embed other files
(typically used to embed BPF .o files) into a hosting userspace programs. To
C program it is exposed as struct bpf_embed_data, containing a pointer to
raw data and its size in bytes.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-5-andriin@fb.com
Generalize BPF program attaching and allow libbpf to auto-detect type (and
extra parameters, where applicable) and attach supported BPF program types
based on program sections. Currently this is supported for:
- kprobe/kretprobe;
- tracepoint;
- raw tracepoint;
- tracing programs (typed raw TP/fentry/fexit).
More types support can be trivially added within this framework.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-3-andriin@fb.com
Make sure we can pass arbitrary data in wire_len/gso_segs.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191213223028.161282-2-sdf@google.com
The xdp_perf is a dummy XDP test, only used to measure the the cost of
jumping into a naive XDP program one million times.
To build and run the program:
$ cd tools/testing/selftests/bpf
$ make
$ ./test_progs -v -t xdp_perf
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191213175112.30208-6-bjorn.topel@gmail.com
The tests were originally written in abort-on-error style. With the switch
to test_progs we can no longer do that. So at the risk of not cleaning up
some resource on failure, we now return to the caller on error.
That said, failure inside one test should not affect others because we run
setup/cleanup before/after every test.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191212102259.418536-11-jakub@cloudflare.com
Do a pure move the show the actual work needed to adapt the tests in
subsequent patch at the cost of breaking test_progs build for the moment.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191212102259.418536-10-jakub@cloudflare.com
The existing fexit_bpf2bpf test covers the target progrm with callees.
This patch added a test for the target program without callees.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191205010607.177904-1-yhs@fb.com
Add several BPF kselftest cases for tail calls which test the various
patch directions, and that multiple locations are patched in same and
different programs.
# ./test_progs -n 45
#45/1 tailcall_1:OK
#45/2 tailcall_2:OK
#45/3 tailcall_3:OK
#45/4 tailcall_4:OK
#45/5 tailcall_5:OK
#45 tailcalls:OK
Summary: 1/5 PASSED, 0 SKIPPED, 0 FAILED
I've also verified the JITed dump after each of the rewrite cases that
it matches expectations.
Also regular test_verifier suite passes fine which contains further tail
call tests:
# ./test_verifier
[...]
Summary: 1563 PASSED, 0 SKIPPED, 0 FAILED
Checked under JIT, interpreter and JIT + hardening.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/3d6cbecbeb171117dccfe153306e479798fb608d.1574452833.git.daniel@iogearbox.net
Add a test that benchmarks different ways of attaching BPF program to a kernel function.
Here are the results for 2.4Ghz x86 cpu on a kernel without mitigations:
$ ./test_progs -n 49 -v|grep events
task_rename base 2743K events per sec
task_rename kprobe 2419K events per sec
task_rename kretprobe 1876K events per sec
task_rename raw_tp 2578K events per sec
task_rename fentry 2710K events per sec
task_rename fexit 2685K events per sec
On a kernel with retpoline:
$ ./test_progs -n 49 -v|grep events
task_rename base 2401K events per sec
task_rename kprobe 1930K events per sec
task_rename kretprobe 1485K events per sec
task_rename raw_tp 2053K events per sec
task_rename fentry 2351K events per sec
task_rename fexit 2185K events per sec
All 5 approaches:
- kprobe/kretprobe in __set_task_comm()
- raw tracepoint in trace_task_rename()
- fentry/fexit in __set_task_comm()
are roughly equivalent.
__set_task_comm() by itself is quite fast, so any extra instructions add up.
Until BPF trampoline was introduced the fastest mechanism was raw tracepoint.
kprobe via ftrace was second best. kretprobe is slow due to trap. New
fentry/fexit methods via BPF trampoline are clearly the fastest and the
difference is more pronounced with retpoline on, since BPF trampoline doesn't
use indirect jumps.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20191122011515.255371-1-ast@kernel.org
test_core_reloc_kernel.c selftest is the only CO-RE test that reads and
returns for validation calling thread's information (pid, tgid, comm). Thus it
has to make sure that only test_prog's invocations are honored.
Fixes: df36e62141 ("selftests/bpf: add CO-RE relocs testing setup")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20191121175900.3486133-1-andriin@fb.com
Add exra level of verboseness, activated by -vvv argument. When -vv is
specified, verbose libbpf and verifier log (level 1) is output, even for
successful tests. With -vvv, verifier log goes to level 2.
This is extremely useful to debug verifier failures, as well as just see the
state and flow of verification. Before this, you'd have to go and modify
load_program()'s source code inside libbpf to specify extra log_level flags,
which is suboptimal to say the least.
Currently -vv and -vvv triggering verifier output is integrated into
test_stub's bpf_prog_load as well as bpf_verif_scale.c tests.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191120003548.4159797-1-andriin@fb.com
Add selftests validating mmap()-ing BPF array maps: both single-element and
multi-element ones. Check that plain bpf_map_update_elem() and
bpf_map_lookup_elem() work correctly with memory-mapped array. Also convert
CO-RE relocation tests to use memory-mapped views of global data.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191117172806.2195367-6-andriin@fb.com
Add a test that attaches one FEXIT program to main sched_cls networking program
and two other FEXIT programs to subprograms. All three tracing programs
access return values and skb->len of networking program and subprograms.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-21-ast@kernel.org
Add stress test for maximum number of attached BPF programs per BPF trampoline.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-13-ast@kernel.org
Add fexit tests for BPF trampoline that checks kernel functions
with up to 6 arguments of different sizes and their return values.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-11-ast@kernel.org
