Support the new numerator and denominator for pixel clock on SM8350 and
support rgb101010, RGB888 use cases on SM8450.
Fixes: 99cbd064b0 ("clk: qcom: Support display RCG clocks")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220227175536.3131-2-tdas@codeaurora.org
The display pixel clock has a requirement on certain newer platforms to
support M/N as (2/3) and the final D value calculated results in
underflow errors.
As the current implementation does not check for D value is within
the accepted range for a given M & N value. Update the logic to
calculate the final D value based on the range.
Fixes: 99cbd064b0 ("clk: qcom: Support display RCG clocks")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220227175536.3131-1-tdas@codeaurora.org
Add missing RPM-provided clocks on msm8998 and reorder the definitions
where needed.
Tested-by: Jami Kettunen <jami.kettunen@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226214126.21209-3-konrad.dybcio@somainline.org
XO and MSS_CFG were omitted when first adding the clocks for these SoCs.
Add them, and while at it, move the XO clock to the top of the definition
list, as ideally everyone should start using it sooner or later..
Fixes: b429784499 ("clk: qcom: smd: Add support for MSM8992/4 rpm clocks")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226214126.21209-2-konrad.dybcio@somainline.org
Add ipq8064 ce5 clk define needed for CryptoEngine in gcc driver.
Define CE5_SRC is not used so it's OK to change and we align it to
the QSDK naming.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226135235.10051-12-ansuelsmth@gmail.com
Add additional freq supported for the sdc table. The ops are changed to
the floor_ops to handle a freq request of 52kHz where we need to provide
a freq of 51.2kHz instead for stability reason.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226135235.10051-11-ansuelsmth@gmail.com
Add clk_rcg_floor_ops for clock that can't provide a stable freq and
require to use a floor freq to provide the requested frequency.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226135235.10051-10-ansuelsmth@gmail.com
Some clocks are used by other devices present on the SoC. For example
the gsbi4_h_clk is used by RPM and is if disabled cause the RPM to
reject any regulator change command. These clock should never be
disabled.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226135235.10051-9-ansuelsmth@gmail.com
Ipq8065 SoC (an evolution of ipq8064 SoC) contains nss cores that can be
clocked to 800MHz. Add these missing freq to the gcc driver.
Set the freq_tbl for the ubi32_cores to the correct values based on the
machine compatible.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226135235.10051-8-ansuelsmth@gmail.com
Use ARRAY_SIZE for num_parents instead of hardcoding the value.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226135235.10051-7-ansuelsmth@gmail.com
Convert parent_names to parent_data to modernize the driver.
Where possible use parent_hws directly.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226135235.10051-6-ansuelsmth@gmail.com
Document qcom,gcc-ipq8064 binding needed to declare pxo and cxo source
clocks. The gcc node is also used by the tsens driver, already documented,
to get the calib nvmem cells and the base reg from gcc. Use
qcom,gcc.yaml as a template and remove the compatible from
generic qcom,gcc-other.yaml
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226135235.10051-4-ansuelsmth@gmail.com
Simplify qcon,gcc-apq8064 Documentation by using qcom,gcc.yaml as a
template and remove the compatible from qcom,gcc.yaml
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226135235.10051-3-ansuelsmth@gmail.com
Split qcom,gcc.yaml to common and specific schema to use it as a
template for schema that needs to use the gcc bindings and require
to add additional bindings.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226135235.10051-2-ansuelsmth@gmail.com
Add device tree bindings for graphics clock controller for
Qualcomm Technology Inc's SM6350 SoCs.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220222011534.3502-3-konrad.dybcio@somainline.org
The Qualcomm SC8280XP platform exposes 5 clocks through the RPMh clock
controller. Add these, and the relates active-only variants, to the RPMh
clock controller driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220223044516.3776637-2-bjorn.andersson@linaro.org
The Qualcomm SC8280XP has a RPMh clock controller, so add a compatible
for this to the binding.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220223044516.3776637-1-bjorn.andersson@linaro.org
Use floor ops on SDCC1 APPS clock in order to round down selected clock
frequency and avoid overclocking SD/eMMC cards.
For example, currently HS200 cards were failling tuning as they were
actually being clocked at 384MHz instead of 192MHz.
This caused some boards to disable 1.8V I/O and force the eMMC into the
standard HS mode (50MHz) and that appeared to work despite the eMMC being
overclocked to 96Mhz in that case.
There was a previous commit to use floor ops on SDCC clocks, but it looks
to have only covered SDCC2 clock.
Fixes: 9607f6224b ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks")
Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220210173100.505128-1-robimarko@gmail.com
The driver can parse bi-tcxo clock from the clocks passed in the device
tree. Specify it in schema.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220215201539.3970459-3-dmitry.baryshkov@linaro.org
Modify the existing MSM8974 multimedia clock controller driver to
support the MMCC found on MSM8226 based devices. This should allow most
multimedia device drivers to probe and control their clocks.
Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220207185411.19118-3-bartosz.dudziak@snejp.pl
The "xo" fixed_factor clock is a leftover/hack from a time when we
couldn't make rpmhcc the root of all clocks. It is going to be removed
once all users of this clock are converted to use clocks specified
through the DTS. Replace internal usage of the xo clock with the cxo
(RPM_SMD_BB_CLK1) parent, specifying xo_board as a fallback.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-17-dmitry.baryshkov@linaro.org
Convert the clock driver to specify parent data rather than parent
names, to actually bind using 'clock-names' specified in the DTS rather
than global clock names. Use parent_hws where possible to refer parent
clocks directly, skipping the lookup.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-16-dmitry.baryshkov@linaro.org
Move clock parent tables down, after the GPLL declrataions, so that we
can use gpll hw clock fields in the next commit.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-15-dmitry.baryshkov@linaro.org
In preparation of updating the msm8996 gcc driver, drop all unsupported
GPLL sources (gpll1/gpll1_early_div, gpll2/gpll2_early and gpll3).
Downstream kernel also does not provide support for these GPLL sources,
so it is safe to drop them.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-14-dmitry.baryshkov@linaro.org
If all parents are specified as clk_hw, we can use parent_hws instead of
parent_data.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-12-dmitry.baryshkov@linaro.org
Convert the clock driver to specify parent hws/data rather than parent
names, to actually bind using 'clock-names' specified in the DTS rather
than global clock names.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-11-dmitry.baryshkov@linaro.org
Move clock parent tables down, after the PLL declrataions, so that we
can use pll hw clock fields in the next commit.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-10-dmitry.baryshkov@linaro.org
The test clock isn't in the bindings and apparently it's not used by
anyone upstream. Remove it.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-9-dmitry.baryshkov@linaro.org
If all parents are specified as clk_hw, we can use parent_hws instead of
parent_data.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-7-dmitry.baryshkov@linaro.org
The test clock isn't in the bindings and apparently it's not used by
anyone upstream. Remove it.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-6-dmitry.baryshkov@linaro.org