So far all of the tablets for which the skip i2c-client/serdev enumeration
quirks have been added also all have broken ACPI AC / battery devices
extend the existing quirks for these tablets to also skip the broken
AC / battery devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some x86 ACPI boards have broken AC and battery ACPI devices in their ACPI
tables. This is often tied to these devices using certain PMICs where the
factory OS image seems to be using native charger and fuel-gauge drivers
instead.
So far both the AC and battery drivers have almost identical checks for
these PMICs including both of them having a DMI based mechanism to force
usage of the ACPI AC and battery drivers on some boards even though one
of these PMICs is present, with the same 2 boards listed in both driver's
DMI tables for this.
The only difference is that the AC driver checks for 2 PMICs and the
battery driver only for one. This has grown this way because the other
(Whiskey Cove) PMIC is only used on a few boards (3 known boards) and
although some of these do have non working ACPI battery devices, their
_STA method always returns 0, but that really should not be relied on.
This patch factors out the shared checks into a new
acpi_quirk_skip_acpi_ac_and_battery() helper and moves the AC and
battery drivers over to this new helper.
Note the DMI table is shared with acpi_quirk_skip_i2c_client_enumeration()
and acpi_quirk_skip_serdev_enumeration(), because boards needing DMI quirks
for either of these typically also have broken AC and battery ACPI devices.
The ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY quirk is not set yet on boards
already in this DMI table, to avoid introducing any functional changes
in this refactoring patch.
Besided sharing the code between the AC and battery drivers this
refactoring also moves this quirk handling to under #ifdef CONFIG_X86,
removing this x86 specific code from non x86 ACPI builds.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
x86 ACPI boards which ship with only Android as their factory image usually
declare a whole bunch of bogus I2C devs in their ACPI tables and sometimes
there are issues with serdev devices on these boards too, e.g. the resource
points to the wrong serdev_controller.
Instantiating I2C / serdev devs for these bogus devs causes various issues,
e.g. GPIO/IRQ resource conflicts because sometimes drivers do bind to them.
The Android x86 kernel fork shipped on these devices has some special code
to remove the bogus I2C clients (and serdevs are ignored completely).
Introduce acpi_quirk_skip_i2c_client_enumeration() and
acpi_quirk_skip_serdev_enumeration() helpers. Which can be used by the I2C/
serdev code to skip instantiating any I2C or serdev devs on broken boards.
These 2 helpers are added to drivers/acpi/x86/utils.c so that the DMI table
can be shared between the I2C and serdev code.
Note these boards typically do actually have I2C and serdev devices, just
different ones then the ones described in their DSDT. The devices which
are actually present are manually instantiated by the
drivers/platform/x86/x86-android-tablets.c kernel module.
The new helpers are only build if CONFIG_X86_ANDROID_TABLETS is enabled,
otherwise they are empty stubs to not unnecessarily grow the kernel size.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Modify the ACPI code to use acpi_fetch_acpi_dev() instead of
acpi_bus_get_device() where applicable.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The Xiaomi Mi Pad 2 has backlit LEDs behind the capacitive menu, home
and back buttons below the screen which are controlled by the PWM2
controller of the CHT SoC. This PWM2 controller gets hidden by the
firmware, add it to the always_present_ids table so that we can use
the PWM controller to control the backlighting of the buttons.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The GPD win and its sibling the GPD pocket (99% the same electronics in a
different case) use a PCI wifi card. But the ACPI tables on both variants
contain a bug where the SDIO MMC controller for SDIO wifi cards is enabled
despite this. This SDIO MMC controller has a PCI0.SDHB.BRC1 child-device
which _PS3 method sets a GPIO causing the PCI wifi card to turn off.
At the moment there is a pretty ugly kludge in the sdhci-acpi.c code,
just to work around the bug in the DSDT of this single design. This can
be solved cleaner/simply with a quirk overriding the _STA return of the
broken PCI0.SDHB.BRC1 PCI0.SDHB.BRC1 child with a status value of 0,
so that its power_manageable flag gets cleared, avoiding this problem.
Note that even though it is not used, the _STA method for the MMC
controller is deliberately not overridden. If the status of the MMC
controller were forced to 0 it would never get suspended, which would
cause these mini-laptops to not reach S0i3 level when suspended.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Not all ACPI-devices have a HID + UID, allow specifying quirks for
acpi_device_override_status() by path too.
Note this moves the path/HID+UID check to after the CPU + DMI checks
since the path lookup is somewhat costly.
This way this lookup is only done on devices where the other checks
match.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, acpi_bus_get_status() calls acpi_device_always_present() to
allow platform quirks to override the _STA return to report that a
device is present (status = ACPI_STA_DEFAULT) independent of the _STA
return.
In some cases it might also be useful to have the opposite functionality
and have a platform quirk which marks a device as not present (status = 0)
to work around ACPI table bugs.
Change acpi_device_always_present() into a more generic
acpi_device_override_status() function to allow this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It turns out that there is a WMI object which controls the PWM2 device
used for the keyboard backlight and that WMI object also provides some
other useful functionality.
The upcoming lenovo-yogabook-wmi driver will offer both backlight
control and the other functionality, so there no longer is a need
to have the lpss-pwm driver binding to PWM2 for backlight control;
and this is now actually undesirable because this will cause both
the WMI code and the lpss-pwm driver to poke at the same PWM
controller.
Drop the always-present quirk for the PWM2 ACPI-device, so that the
lpss-pwm controller will no longer bind to it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It was reported that on "HP ENVY x360" that power LED does not come
back, certain keys like brightness controls do not work, and the fan
never spins up, even under load on 5.14 final.
In analysis of the SSDT it's clear that the Microsoft UUID doesn't
provide functional support, but rather the AMD UUID should be
supporting this system.
Because this is a gap in the expected logic, we checked back with
internal team. The conclusion was that on Windows AMD uPEP *does*
run even when Microsoft UUID present, but most OEM systems have
adopted value of "0x3" for supported functions and hence nothing
runs.
Henceforth add support for running both Microsoft and AMD methods.
This approach will also allow the same logic on Intel systems if
desired at a future time as well by pulling the evaluation of
`lps0_dsm_func_mask_microsoft` out of the `if` block for
`acpi_s2idle_vendor_amd`.
Link: https://gitlab.freedesktop.org/drm/amd/uploads/9fbcd7ec3a385cc6949c9bacf45dc41b/acpi-f.20.bin
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1691
Reported-by: Maxwell Beck <max@ryt.one>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[ rjw: Edits of the new comments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It was reported by a user with a Dell m15 R5 (5800H) that
the keyboard backlight was turning on when entering suspend
and turning off when exiting (the opposite of how it should be).
The user bisected it back to commit 5dbf509975 ("ACPI: PM:
s2idle: Add support for new Microsoft UUID"). Previous to that
commit the LEDs didn't turn off at all. Confirming in the spec,
these were reversed when introduced.
Fix them to match the spec.
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1230#note_1021836
Fixes: 5dbf509975 ("ACPI: PM: s2idle: Add support for new Microsoft UUID")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
AMD systems with uPEP HID AMDI007 should be using revision 2 and
the AMD method.
Fixes: 8fbd6c15ea ("ACPI: PM: Adjust behavior for field problems on AMD systems")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix up the recently added Platform Runtime Mechanism (PRM)
support by correnting a couple of implementation mistakes in it
and adding a Kconfig help text to describe it (Aubrey Li,
Rafael Wysocki).
- Add backlight quirk for Dell Vostro 3350 (Hans de Goede).
- Avoid spurious wakeups from suspend-to-idle on non-Intel platforms
by restricting special EC GPE handling to the Intel ones (Mario
Limonciello).
- Modify the AMBA bus support in ACPI to avoid adding using
resource names in /proc/iomem (Liguang Zhang).
-----BEGIN PGP SIGNATURE-----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=PXKo
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These include fixes of the recently introduced support for the
Platform Runtime Mechanism (PRM) feature, a new backlight quirk, a
suspend-to-idle wakeup fix for non-Intel platforms and a fix for the
AMBA bus resource list in /proc/iomem.
Specifics:
- Fix up the recently added Platform Runtime Mechanism (PRM) support
by correnting a couple of implementation mistakes in it and adding
a Kconfig help text to describe it (Aubrey Li, Rafael Wysocki).
- Add backlight quirk for Dell Vostro 3350 (Hans de Goede).
- Avoid spurious wakeups from suspend-to-idle on non-Intel platforms
by restricting special EC GPE handling to the Intel ones (Mario
Limonciello).
- Modify the AMBA bus support in ACPI to avoid adding using resource
names in /proc/iomem (Liguang Zhang)"
* tag 'acpi-5.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Do not singal PRM support if not enabled
ACPI: Correct \_SB._OSC bit definition for PRM
ACPI: Kconfig: Provide help text for the ACPI_PRMT option
ACPI: PM: Only mark EC GPE for wakeup on Intel systems
ACPI: video: Add quirk for the Dell Vostro 3350
ACPI: AMBA: Fix resource name in /proc/iomem
When using s2idle on a variety of AMD notebook systems, they are
experiencing spurious events that the EC or SMU are in the wrong
state leading to a hard time waking up or higher than expected
power consumption.
These events only occur when the EC GPE is inadvertently set as a wakeup
source. Originally the EC GPE was only set as a wakeup source when using
the intel-vbtn or intel-hid drivers in commit 10a08fd65e ("ACPI: PM:
Set up EC GPE for system wakeup from drivers that need it") but during
testing a reporter discovered that this was not enough for their ASUS
Zenbook UX430UNR/i7-8550U to wakeup by lid event or keypress.
Marking the EC GPE for wakeup universally resolved this for that
reporter in commit b90ff3554a ("ACPI: PM: s2idle: Always set up EC GPE
for system wakeup").
However this behavior has lead to a number of problems:
* On both Lenovo T14 and P14s the keyboard wakeup doesn't work, and
sometimes the power button event doesn't work.
* On HP 635 G7 detaching or attaching AC during suspend will cause
the system not to wakeup
* On Asus vivobook to prevent detaching AC causing resume problems
* On Lenovo 14ARE05 to prevent detaching AC causing resume problems
* On HP ENVY x360 to prevent detaching AC causing resume problems
As there may be other Intel systems besides ASUS Zenbook UX430UNR/i7-8550U
that don't use intel-vbtn or intel-hid, avoid these problems by only
universally marking the EC GPE wakesource on non-AMD systems.
Link: https://patchwork.kernel.org/project/linux-pm/cover/5997740.FPbUVk04hV@kreacher/#22825489
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1230
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1629
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmDbd5UQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpvsNEADCJKP81boFzRcdJo7EqaNDAzZyKOIg9Oq7
4GZE0Wm0SgA6+04bKrNVd9KLcKvQ+NC1pK7UJemSSH2y9ir+zHfyYgAV0/+wFmYm
NgHlDjBvf80XSI5wezcb6MxZT+R7IaIpDsW1ZvV9hFtPSncn5o2OIWiSdJtHT/Rv
enlgZPc7OwNWoVMX8eR58IoO0k3S6GLpctUZHt/AUukaKgoOks0X523qhEPf3Upr
RkbIZuqLWVgpdT6457iSE/OijUczD4thTI8bdprxzhgimOm2vV52sO6F5HtHc7GX
qW+PWYUaiUk7UpObuOuyv0yyUG45ii73iY1W0w66RiyCjVTgtpdwwMQ38VlBcoOg
zcE1jneAEJt6TiS6zfRaER/10JoCIG4gp1+apPuaXud/o3BqWI0cagVHAgaLziBI
F7bDJkbJZIR6GrWMgemBI+mc5/LACBePxzPGLScKFptejtQ/ysfZQ6aCLROJWB2U
4EnysAaUBf6tywj30JqfQvqFNGkHIgY95FKiXJW6GzqqwgBouNf48vS15BgkwI+2
EijcqUhlOVNfc3RIc0ZL5c9KcPIN9t5sqBrWZe3wgCErhxAx6w6Za9nDdP+US9bl
/apCpvDFlu59g8n1wtkNE/uC+XqdKDwsplYhnfpX0FGni5wIknhQq3bSe4dPFgSn
pG5VMrw3pA==
=D6dS
-----END PGP SIGNATURE-----
Merge tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Pretty calm round, mostly just NVMe and a bit of MD:
- NVMe updates (via Christoph)
- improve the APST configuration algorithm (Alexey Bogoslavsky)
- look for StorageD3Enable on companion ACPI device
(Mario Limonciello)
- allow selecting the network interface for TCP connections
(Martin Belanger)
- misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King,
Christoph)
- move the ACPI StorageD3 code to drivers/acpi/ and add quirks
for certain AMD CPUs (Mario Limonciello)
- zoned device support for nvmet (Chaitanya Kulkarni)
- fix the rules for changing the serial number in nvmet
(Noam Gottlieb)
- various small fixes and cleanups (Dan Carpenter, JK Kim,
Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert
Uytterhoeven, Daniel Wagner)
- MD updates (Via Song)
- iostats rewrite (Guoqing Jiang)
- raid5 lock contention optimization (Gal Ofri)
- Fall through warning fix (Gustavo)
- Misc fixes (Gustavo, Jiapeng)"
* tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits)
nvmet: use NVMET_MAX_NAMESPACES to set nn value
loop: Fix missing discard support when using LOOP_CONFIGURE
nvme.h: add missing nvme_lba_range_type endianness annotations
nvme: remove zeroout memset call for struct
nvme-pci: remove zeroout memset call for struct
nvmet: remove zeroout memset call for struct
nvmet: add ZBD over ZNS backend support
nvmet: add Command Set Identifier support
nvmet: add nvmet_req_bio put helper for backends
nvmet: add req cns error complete helper
block: export blk_next_bio()
nvmet: remove local variable
nvmet: use nvme status value directly
nvmet: use u32 type for the local variable nsid
nvmet: use u32 for nvmet_subsys max_nsid
nvmet: use req->cmd directly in file-ns fast path
nvmet: use req->cmd directly in bdev-ns fast path
nvmet: make ver stable once connection established
nvmet: allow mn change if subsys not discovered
nvmet: make sn stable once connection was established
...
Some AMD Systems with uPEP _HID AMD004/AMDI005 have an off by one bug
in their function mask return. This means that they will call entrance
but not exit for matching functions.
Other AMD systems with this HID should use the Microsoft generic UUID.
AMD systems with uPEP HID AMDI006 should be using the Microsoft method.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This adds supports for _DSM notifications to the Microsoft UUID
described by Microsoft documentation for s2idle.
Link: https://docs.microsoft.com/en-us/windows-hardware/design/device-experiences/modern-standby-firmware-notifications
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Required for follow-up patch adding new UUID needing new function
mask.
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Refactor common code to prepare for upcoming changes.
* Remove unused struct.
* Print error before returning.
* Frees ACPI obj if _DSM type is not as expected.
* Treat lps0_dsm_func_mask as an integer rather than character
* Remove extra out_obj
* Move rev_id
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
AMD spec mentions only revision 0. With this change,
device constraint list is populated properly.
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
AMD systems from Renoir and Lucienne require that the NVME controller
is put into D3 over a Modern Standby / suspend-to-idle
cycle. This is "typically" accomplished using the `StorageD3Enable`
property in the _DSD, but this property was introduced after many
of these systems launched and most OEM systems don't have it in
their BIOS.
On AMD Renoir without these drives going into D3 over suspend-to-idle
the resume will fail with the NVME controller being reset and a trace
like this in the kernel logs:
```
[ 83.556118] nvme nvme0: I/O 161 QID 2 timeout, aborting
[ 83.556178] nvme nvme0: I/O 162 QID 2 timeout, aborting
[ 83.556187] nvme nvme0: I/O 163 QID 2 timeout, aborting
[ 83.556196] nvme nvme0: I/O 164 QID 2 timeout, aborting
[ 95.332114] nvme nvme0: I/O 25 QID 0 timeout, reset controller
[ 95.332843] nvme nvme0: Abort status: 0x371
[ 95.332852] nvme nvme0: Abort status: 0x371
[ 95.332856] nvme nvme0: Abort status: 0x371
[ 95.332859] nvme nvme0: Abort status: 0x371
[ 95.332909] PM: dpm_run_callback(): pci_pm_resume+0x0/0xe0 returns -16
[ 95.332936] nvme 0000:03:00.0: PM: failed to resume async: error -16
```
The Microsoft documentation for StorageD3Enable mentioned that Windows has
a hardcoded allowlist for D3 support, which was used for these platforms.
Introduce quirks to hardcode them for Linux as well.
As this property is now "standardized", OEM systems using AMD Cezanne and
newer APU's have adopted this property, and quirks like this should not be
necessary.
CC: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com>
CC: Alexander Deucher <Alexander.Deucher@amd.com>
CC: Prike Liang <prike.liang@amd.com>
Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
These are supposedly not required for AMD platforms,
but at least some HP laptops seem to require it to
properly turn off the keyboard backlight.
Based on a patch from Marcin Bachry <hegel666@gmail.com>.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1230
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Two local variables in drivers/acpi/x86/s2idle.c are never read, so
drop them along with the code updating their values (in vain).
Fixes: fef9867119 ("ACPI: PM: s2idle: Move x86-specific code to the x86 directory")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some code in drivers/acpi/sleep.c (which is regarded as a generic
file) related to suspend-to-idle support has grown direct dependencies
on x86, but in fact it has been specific to x86 (which is the only
user of it) anyway for a long time.
For this reason, move that code to a separate file under acpi/x86/
and make it build and run as before under the right conditions.
While at it, rename a vendor checking function in that code and
consistently use acpi_handle_debug() for printing debug-related
information in it.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The new macro set has a consistent namespace and uses C99 initializers
instead of the grufty C89 ones.
Rename the local macro wrapper to X86_MATCH for consistency. It stays for
readability sake.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131509.467730627@linutronix.de
Currently big core mobile chips have either:
- _L
- _ULT
- _MOBILE
Make it uniformly: _L.
for i in `git grep -l "\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*_\(MOBILE\|ULT\)"`
do
sed -i -e 's/\(\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*\)_\(MOBILE\|ULT\)/\1_L/g' ${i}
done
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: x86@kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190827195122.568978530@infradead.org
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lenovo Yoga Book uses PWM2 for controlling keyboard backlight but this
device is hidden in the DSDT in Windows version of notebook (if OSID == 1).
Make this device always present for this notebook.
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----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=58I4
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- Fix ASPM link_state teardown on removal (Lukas Wunner)
- Fix misleading _OSC ASPM message (Sinan Kaya)
- Make _OSC optional for PCI (Sinan Kaya)
- Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
(Patrick Talbert)
- Remove x86 and arm64 node-local allocation for host bridge structures
(Punit Agrawal)
- Pay attention to device-specific _PXM node values (Jonathan Cameron)
- Support new Immediate Readiness bit (Felipe Balbi)
- Differentiate between pciehp surprise and safe removal (Lukas Wunner)
- Remove unnecessary pciehp includes (Lukas Wunner)
- Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)
- Tolerate PCIe Slot Presence Detect being hardwired to zero to
workaround broken hardware, e.g., the Wilocity switch/wireless device
(Lukas Wunner)
- Unify pciehp controller & slot structs (Lukas Wunner)
- Constify hotplug_slot_ops (Lukas Wunner)
- Drop hotplug_slot_info (Lukas Wunner)
- Embed hotplug_slot struct into users instead of allocating it
separately (Lukas Wunner)
- Initialize PCIe port service drivers directly instead of relying on
initcall ordering (Keith Busch)
- Restore PCI config state after a slot reset (Keith Busch)
- Save/restore DPC config state along with other PCI config state
(Keith Busch)
- Reference count devices during AER handling to avoid race issue with
concurrent hot removal (Keith Busch)
- If an Upstream Port reports ERR_FATAL, don't try to read the Port's
config space because it is probably unreachable (Keith Busch)
- During error handling, use slot-specific reset instead of secondary
bus reset to avoid link up/down issues on hotplug ports (Keith Busch)
- Restore previous AER/DPC handling that does not remove and
re-enumerate devices on ERR_FATAL (Keith Busch)
- Notify all drivers that may be affected by error recovery resets
(Keith Busch)
- Always generate error recovery uevents, even if a driver doesn't have
error callbacks (Keith Busch)
- Make PCIe link active reporting detection generic (Keith Busch)
- Support D3cold in PCIe hierarchies during system sleep and runtime,
including hotplug and Thunderbolt ports (Mika Westerberg)
- Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
are empty or occupied (Jon Derrick)
- Remove duplicated include from pci/pcie/err.c and unused variable
from cpqphp (YueHaibing)
- Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
Pawandeep)
- Uninline PCI bus accessors for better ftracing (Keith Busch)
- Remove unused AER Root Port .error_resume method (Keith Busch)
- Use kfifo in AER instead of a local version (Keith Busch)
- Use threaded IRQ in AER bottom half (Keith Busch)
- Use managed resources in AER core (Keith Busch)
- Reuse pcie_port_find_device() for AER injection (Keith Busch)
- Abstract AER interrupt handling to disconnect error injection (Keith
Busch)
- Refactor AER injection callbacks to simplify future improvments
(Keith Busch)
- Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)
- Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)
- Add switch fall-through annotations (Gustavo A. R. Silva)
- Remove unused Switchtec quirk variable (Joshua Abraham)
- Fix pci.c kernel-doc warning (Randy Dunlap)
- Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)
- Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)
- Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
useless dmesg errors (Logan Gunthorpe)
- Update Switchtec NTB documentation (Wesley Yung)
- Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)
- Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)
- Add PCI support for peer-to-peer DMA (Logan Gunthorpe)
- Add sysfs group for PCI peer-to-peer memory statistics (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
Gunthorpe)
- Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA driver writer's documentation (Logan
Gunthorpe)
- Add block layer flag to indicate driver support for PCI peer-to-peer
DMA (Logan Gunthorpe)
- Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
memory (Logan Gunthorpe)
- Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
Gunthorpe)
- Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
Gunthorpe)
- Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
Christoph Hellwig, Logan Gunthorpe)
- Cache VF config space size to optimize enumeration of many VFs
(KarimAllah Ahmed)
- Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)
- Fix VMD AERSID quirk Device ID matching (Jon Derrick)
- Fix Cadence PHY handling during probe (Alan Douglas)
- Signal Cadence Endpoint interrupts via AXI region 0 instead of last
region (Alan Douglas)
- Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
Douglas)
- Remove redundant controller tests for "device_type == pci" (Rob
Herring)
- Document R-Car E3 (R8A77990) bindings (Tho Vu)
- Add device tree support for R-Car r8a7744 (Biju Das)
- Drop unused mvebu PCIe capability code (Thomas Petazzoni)
- Add shared PCI bridge emulation code (Thomas Petazzoni)
- Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)
- Add aardvark Root Port emulation (Thomas Petazzoni)
- Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)
- Add initial power management for i.MX7 (Leonard Crestez)
- Add PME_Turn_Off support for i.MX7 (Leonard Crestez)
- Fix qcom runtime power management error handling (Bjorn Andersson)
- Update TI dra7xx unaligned access errata workaround for host mode as
well as endpoint mode (Vignesh R)
- Fix kirin section mismatch warning (Nathan Chancellor)
- Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)
- Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)
- Update Keystone to use MRRS quirk for host bridge instead of open
coding (Kishon Vijay Abraham I)
- Refactor Keystone link establishment (Kishon Vijay Abraham I)
- Simplify and speed up Keystone link training (Kishon Vijay Abraham I)
- Remove unused Keystone host_init argument (Kishon Vijay Abraham I)
- Merge Keystone driver files into one (Kishon Vijay Abraham I)
- Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
Abraham I)
- Rename Keystone functions for uniformity (Kishon Vijay Abraham I)
- Add Keystone device control module DT binding (Kishon Vijay Abraham
I)
- Use SYSCON API to get Keystone control module device IDs (Kishon
Vijay Abraham I)
- Clean up Keystone PHY handling (Kishon Vijay Abraham I)
- Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)
- Clean up Keystone config space access checks (Kishon Vijay Abraham I)
- Get Keystone outbound window count from DT (Kishon Vijay Abraham I)
- Clean up Keystone outbound window configuration (Kishon Vijay Abraham
I)
- Clean up Keystone DBI setup (Kishon Vijay Abraham I)
- Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)
- Fix Keystone IRQ status checking (Kishon Vijay Abraham I)
- Add debug messages for all Keystone errors (Kishon Vijay Abraham I)
- Clean up Keystone includes and macros (Kishon Vijay Abraham I)
- Fix Mediatek unchecked return value from devm_pci_remap_iospace()
(Gustavo A. R. Silva)
- Fix Mediatek endpoint/port matching logic (Honghui Zhang)
- Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
Zhang)
- Remove redundant Mediatek PM domain check (Honghui Zhang)
- Convert Mediatek to pci_host_probe() (Honghui Zhang)
- Fix Mediatek MSI enablement (Honghui Zhang)
- Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)
- Add Mediatek loadable module support (Honghui Zhang)
- Detach VMD resources after stopping root bus to prevent orphan
resources (Jon Derrick)
- Convert pcitest build process to that used by other tools (iio, perf,
etc) (Gustavo Pimentel)
* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
PCI/AER: Refactor error injection fallbacks
PCI/AER: Abstract AER interrupt handling
PCI/AER: Reuse existing pcie_port_find_device() interface
PCI/AER: Use managed resource allocations
PCI: pcie: Remove redundant 'default n' from Kconfig
PCI: aardvark: Implement emulated root PCI bridge config space
PCI: mvebu: Convert to PCI emulated bridge config space
PCI: mvebu: Drop unused PCI express capability code
PCI: Introduce PCI bridge emulated config space common logic
PCI: vmd: Detach resources after stopping root bus
nvmet: Optionally use PCI P2P memory
nvmet: Introduce helper functions to allocate and free request SGLs
nvme-pci: Add support for P2P memory in requests
nvme-pci: Use PCI p2pmem subsystem to manage the CMB
IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
block: Add PCI P2P flag for request queue
PCI/P2PDMA: Add P2P DMA driver writer's documentation
docs-rst: Add a new directory for PCI documentation
PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
...
Pull perf updates from Ingo Molnar:
"The main updates in this cycle were:
- Lots of perf tooling changes too voluminous to list (big perf trace
and perf stat improvements, lots of libtraceevent reorganization,
etc.), so I'll list the authors and refer to the changelog for
details:
Benjamin Peterson, Jérémie Galarneau, Kim Phillips, Peter
Zijlstra, Ravi Bangoria, Sangwon Hong, Sean V Kelley, Steven
Rostedt, Thomas Gleixner, Ding Xiang, Eduardo Habkost, Thomas
Richter, Andi Kleen, Sanskriti Sharma, Adrian Hunter, Tzvetomir
Stoyanov, Arnaldo Carvalho de Melo, Jiri Olsa.
... with the bulk of the changes written by Jiri Olsa, Tzvetomir
Stoyanov and Arnaldo Carvalho de Melo.
- Continued intel_rdt work with a focus on playing well with perf
events. This also imported some non-perf RDT work due to
dependencies. (Reinette Chatre)
- Implement counter freezing for Arch Perfmon v4 (Skylake and newer).
This allows to speed up the PMI handler by avoiding unnecessary MSR
writes and make it more accurate. (Andi Kleen)
- kprobes cleanups and simplification (Masami Hiramatsu)
- Intel Goldmont PMU updates (Kan Liang)
- ... plus misc other fixes and updates"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (155 commits)
kprobes/x86: Use preempt_enable() in optimized_callback()
x86/intel_rdt: Prevent pseudo-locking from using stale pointers
kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack
perf/x86/intel: Export mem events only if there's PEBS support
x86/cpu: Drop pointless static qualifier in punit_dev_state_show()
x86/intel_rdt: Fix initial allocation to consider CDP
x86/intel_rdt: CBM overlap should also check for overlap with CDP peer
x86/intel_rdt: Introduce utility to obtain CDP peer
tools lib traceevent, perf tools: Move struct tep_handler definition in a local header file
tools lib traceevent: Separate out tep_strerror() for strerror_r() issues
perf python: More portable way to make CFLAGS work with clang
perf python: Make clang_has_option() work on Python 3
perf tools: Free temporary 'sys' string in read_event_files()
perf tools: Avoid double free in read_event_file()
perf tools: Free 'printk' string in parse_ftrace_printk()
perf tools: Cleanup trace-event-info 'tdata' leak
perf strbuf: Match va_{add,copy} with va_end
perf test: S390 does not support watchpoints in test 22
perf auxtrace: Include missing asm/bitsperlong.h to get BITS_PER_LONG
tools include: Adopt linux/bits.h
...
It is possible to have _DSD entries where the data is compatible with
device properties format but are using different GUID for various reasons.
In addition to that there can be many such _DSD entries for a single device
such as for PCIe root port used to host a Thunderbolt hierarchy:
Scope (\_SB.PCI0.RP21)
{
Name (_DSD, Package () {
ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"),
Package () {
Package () {"HotPlugSupportInD3", 1}
},
ToUUID ("efcc06cc-73ac-4bc3-bff0-76143807c389"),
Package () {
Package () {"ExternalFacingPort", 1},
Package () {"UID", 0 }
}
})
}
More information about these new _DSD entries can be found in:
https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports
To make these available for drivers via unified device property APIs,
modify ACPI property core so that it supports multiple _DSD entries
organized in a linked list. We also store GUID of each _DSD entry in struct
acpi_device_properties in case there is need to differentiate between
entries. The supported GUIDs are then listed in prp_guids array.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Going primarily by:
https://en.wikipedia.org/wiki/List_of_Intel_Atom_microprocessors
with additional information gleaned from other related pages; notably:
- Bonnell shrink was called Saltwell
- Moorefield is the Merriefield refresh which makes it Airmont
The general naming scheme is: FAM6_ATOM_UARCH_SOCTYPE
for i in `git grep -l FAM6_ATOM` ; do
sed -i -e 's/ATOM_PINEVIEW/ATOM_BONNELL/g' \
-e 's/ATOM_LINCROFT/ATOM_BONNELL_MID/' \
-e 's/ATOM_PENWELL/ATOM_SALTWELL_MID/g' \
-e 's/ATOM_CLOVERVIEW/ATOM_SALTWELL_TABLET/g' \
-e 's/ATOM_CEDARVIEW/ATOM_SALTWELL/g' \
-e 's/ATOM_SILVERMONT1/ATOM_SILVERMONT/g' \
-e 's/ATOM_SILVERMONT2/ATOM_SILVERMONT_X/g' \
-e 's/ATOM_MERRIFIELD/ATOM_SILVERMONT_MID/g' \
-e 's/ATOM_MOOREFIELD/ATOM_AIRMONT_MID/g' \
-e 's/ATOM_DENVERTON/ATOM_GOLDMONT_X/g' \
-e 's/ATOM_GEMINI_LAKE/ATOM_GOLDMONT_PLUS/g' ${i}
done
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: dave.hansen@linux.intel.com
Cc: len.brown@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that we init the status field to ACPI_STA_DEFAULT rather then to 0,
the workaround for acpi_match_device_ids() always returning -ENOENT when
status is 0 is no longer needed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Permanently enable the SYNA7500 touchscreen device on the Dell
Venue Pro 7139. The DSDT hides the touchscreen ACPI device on
the 7139 in the same fashion as the 7130, and needs to
be enabled in the same way.
Signed-off-by: Tristian Celestin <tristiancelestin@fastmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Recently produced GPD win devices have a new BIOS, research into the
changes in this BIOS has found a ChangeLog which shows that the disabling
of the KIOX000A node has been done starting with the 20170221 version.
Unfortunately the GPD pocket uses the exact same DMI strings as the win
and its BIOS was copy-pasted from the GPD win, so it has a disabled
KIOX000A node which we should not enable, so we need to check for the
exact BIOS date.
This commit adds 2 extra entries to the always_present_ids quirk table
with bios_date matches for the older also affected and the latest BIOS.
Reported-by: ReddestDream <reddestdream@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While the rest of the world has standardized on _DSD as the way to store
device properties in AML (introduced with ACPI 5.1 in 2014), Apple has
been using a custom _DSM to achieve the same for much longer (ever since
they switched from DeviceTree-based PowerPC to Intel in 2005, verified
with MacOS X 10.4.11).
The theory of operation on macOS is as follows: AppleACPIPlatform.kext
invokes mergeEFIproperties() and mergeDSMproperties() for each device to
merge properties conveyed by EFI drivers as well as properties stored in
AML into the I/O Kit registry from which they can be retrieved by
drivers. We've been supporting EFI properties since commit 58c5475aba
("x86/efi: Retrieve and assign Apple device properties"). The present
commit adds support for _DSM properties, thereby completing our support
for Apple device properties. The _DSM properties are made available
under the primary fwnode, the EFI properties under the secondary fwnode.
So for devices which possess both property types, they can all be
elegantly accessed with the uniform API in <linux/property.h>.
Until recently we had no need to support _DSM properties, they contained
only uninteresting garbage. The situation has changed with MacBooks and
MacBook Pros introduced since 2015: Their keyboard is attached with SPI
instead of USB and the _CRS data which is necessary to initialize the
spi driver only contains valid information if OSPM responds "false" to
_OSI("Darwin"). If OSPM responds "true", _CRS is empty and the spi
driver fails to initialize. The rationale is very simple, Apple only
cares about macOS and Windows: On Windows, _CRS contains valid data,
whereas on macOS it is empty. Instead, macOS gleans the necessary data
from the _DSM properties.
Since Linux deliberately defaults to responding "true" to _OSI("Darwin"),
we need to emulate macOS' behaviour by initializing the spi driver with
data returned by the _DSM.
An out-of-tree driver for the SPI keyboard exists which currently binds
to the ACPI device, invokes the _DSM, parses the returned package and
instantiates an SPI device with the data gleaned from the _DSM:
https://github.com/cb22/macbook12-spi-driver/commit/9a416d699ef4https://github.com/cb22/macbook12-spi-driver/commit/0c34936ed9a1
By adding support for Apple's _DSM properties in generic ACPI code, the
out-of-tree driver will be able to register as a regular SPI driver,
significantly reducing its amount of code and improving its chances to
be mainlined.
The SPI keyboard will not be the only user of this commit: E.g. on the
MacBook8,1, the UART-attached Bluetooth device likewise returns empty
_CRS data if OSPM returns "true" to _OSI("Darwin").
The _DSM returns a Package whose format unfortunately deviates slightly
from the _DSD spec: The properties are marshalled up in a single Package
as alternating key/value elements, unlike _DSD which stores them as a
Package of 2-element Packages. The present commit therefore converts
the Package to _DSD format and the ACPI core can then treat the data as
if Apple would follow the standard.
Well, except for one small annoyance: The properties returned by the
_DSM only ever have one of two types, Integer or Buffer. The former is
retrievable as usual with device_property_read_u64(), but the latter is
not part of the _DSD spec and it is not possible to retrieve Buffer
properties with the device_property_read_*() functions due to the type
checking performed in drivers/acpi/property.c. It is however possible
to retrieve them with acpi_dev_get_property(). Apple is using the
Buffer type somewhat sloppily to store null-terminated strings but also
integers. The real data type is not distinguishable by the ACPI core
and the onus is on the caller to use the contents of the Buffer in an
appropriate way.
In case Apple moves to _DSD in the future, this commit first checks for
_DSD and falls back to _DSM only if _DSD is not found.
Tested-by: Ronald Tschalär <ronald@innovation.ch>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The GPD win BIOS dated 20170320 has disabled the accelerometer, the
drivers sometimes cause crashes under Windows and this is how the
manufacturer has solved this :|
I see no other way to keep the accelerometer working under Windows then
adding it to the always_present_ids array.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The _STA method of the Venue 11 Pro 7130 touchscreen has this ugliness:
Method (_STA, 0, NotSerialized) // _STA: Status
{
If ((SDS1 & One) == One)
{
If (RST1 == Zero)
{
Return (0x0F)
}
ElseIf (RST2 == Zero)
{
RST2 = One
TMRV = Timer
}
Else
{
Local0 = ((Timer - TMRV) / 0x2710)
If (Local0 > TMRI)
{
RST2 = Zero
RST1 = Zero
}
}
}
Else
{
Return (Zero)
}
}
Whereby RST1 gets set by _SB.PCI0.GFX0.LCD.LCD1._ON, this means that
after RST1 has been set first _STA must be called to set TIMER and
then after enough time has elapsed _STA must be called twice more, once
to clear RST1 and once to finally return 0xf before the touchscreen will
show up. Which is just crazy.
This commit adds an always_present_ids entry for the SYNA7500 touchscreen
ACPI node, together with a DMI match for the Venue 11 Pro 7130, fixing the
touchscreen not working on this device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On some x86 systems the DSDT hides APCI devices to work around Windows
driver bugs. On one such system the device is even hidden until a certain
time after _SB.PCI0.GFX0.LCD.LCD1._ON gets called has passed *and*
_STA has been called at least 3 times since. TL;DR: it is a mess.
Until now the always_present_id matching was used to force status
for a whole class of devices, e.g. always enable PWM1 on CHerry Trail
devices.
This commit extends the always_present_id matching code to optionally
also check for a DMI match so that we can also add system specific
quirks to the always_present_id array.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The INT0002 device is necessary to clear wakeup interrupt sources
on Cherry Trail devices, without it we get nobody cared IRQ msgs
and some systems don't properly resume at all without it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Several Bay / Cherry Trail devices (all of which ship with Windows 10) hide
the LPSS PWM controller in ACPI, typically the _STA method looks like this:
Method (_STA, 0, NotSerialized) // _STA: Status
{
If (OSID == One)
{
Return (Zero)
}
Return (0x0F)
}
Where OSID is some dark magic seen in all Cherry Trail ACPI tables making
the machine behave differently depending on which OS it *thinks* it is
booting, this gets set in a number of ways which we cannot control, on
some newer machines it simple hardcoded to "One" aka win10.
This causes the PWM controller to get hidden, which means Linux cannot
control the backlight level on cht based tablets / laptops.
Since loading the driver for this does no harm (the only in kernel user
of it is the i915 driver, which will only uses it when it needs it), this
commit makes acpi_bus_get_status() always set status to ACPI_STA_DEFAULT
for the LPSS PWM device, fixing the lack of backlight control.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[ rjw: Rename the new file to utils.c ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
