As a preparation to support Reconfiguration Multi Link
element, rename 'multi_link' and 'multi_link_len' fields
in 'struct ieee802_11_elems' to 'ml_basic' and 'ml_basic_len'.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.b11370d3066a.I34280ae3728597056a6a2f313063962206c0d581@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The removed code ran for any BSS that was not included in the MBSSID
element in order to update it. However, instead of using the correct
inheritance rules, it would simply copy the elements from the
transmitting AP. The result is that we would report incorrect elements
in this case.
After some discussions, it seems that there are likely not even APs
actually using this feature. Either way, removing the code decreases
complexity and makes the cfg80211 behaviour more correct.
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.cfd6d8db1f26.Ia1044902b86cd7d366400a4bfb93691b8f05d68c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The cfg80211_gen_new_ie function merges the IEs using inheritance rules.
Rewrite this function to fix issues around inheritance rules. In
particular, vendor elements do not require any special handling, as they
are either all inherited or overridden by the subprofile.
Also, add fragmentation handling as this may be needed in some cases.
This also changes the function to not require making a copy. The new
version could be optimized a bit by explicitly tracking which IEs have
been handled already rather than looking that up again every time.
Note that a small behavioural change is the removal of the SSID special
handling. This should be fine for the MBSSID element, as the SSID must
be included in the subelement.
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.bc6152e146db.I2b5f3bc45085e1901e5b5192a674436adaf94748@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The TBTT information field type must be zero. This is only changed in
the 802.11be draft specification where the value 1 is used to indicate
that only the MLD parameters are included.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.7865606ffe94.I7ff28afb875d1b4c39acd497df8490a7d3628e3f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Doing this simplifies the code somewhat, as iteration over the
nontransmitted BSSs is not required anymore. Also, mac80211 should
not be iterating over the nontrans_list as it should only be accessed
while the bss_lock is held.
It also simplifies parsing of the IEs somewhat, as cfg80211 already
extracts the IEs and passes them to the callback.
Note that the only user left requiring parsing a specific BSS is the
association code if a beacon is required by the hardware.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.39ebfe2f9e59.Ia012b08e0feed8ec431b666888b459f6366f7bd1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This new function is called from within the inform_bss(_frame)_data
functions in order for the driver to update data that it is tracking.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.8d7781b0f965.I80041183072b75c081996a1a5a230b34aff5c668@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It is reasonable to hold bss_lock for a little bit longer after
cfg80211_bss_update is done. Right now, this does not make any big
difference, but doing so in preparation for the next patch which adds
a call to the driver.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.61701884ff0d.I3358228209eb6766202aff04d1bae0b8fdff611f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These calls do not require any locking, so move them in preparation for
the next patches.
A minor change/bugfix is to not hint a beacon for nontransmitted BSSes
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.a5bf3558eae9.I33c7465d983c8bef19deb7a533ee475a16f91774@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add NULL check for compat variable to avoid crash in
cfg80211_chandef_compatible() if it got called with
some mixed up channel context where not all the users
compatible with each other, which shouldn't happen.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.ae0f10dfd36b.Iea98c74aeb87bf6ef49f6d0c8687bba0dbea2abd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In both of these cases (config_link, prep_channel) it is not needed
to parse the MBSSID data for a nontransmitted BSS. In the config_link
case the frame does not contain any MBSSID element and inheritance
rules are only needed for the ML STA profile. While in the
prep_channel case the IEs have already been processed by cfg80211 and
are already exploded.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.66d2605ff0ad.I7cdd1d390e7b0735c46204231a9e636d45b7f1e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the device is associated with an AP MLD, then TDLS data frames
should have
- A1 = peer address,
- A2 = own MLD address (since the peer may now know about MLO), and
- A3 = BSSID.
Change the code to do that.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.4bf648b63dfd.I98ef1dabd14b74a92120750f7746a7a512011701@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Userspace can now select the link to use for TDLS management
frames (indicating e.g. which BSSID should be used), use the
link_id received from cfg80211 to build the frames.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.ce1fc230b505.Ie773c5679805001f5a52680d68d9ce0232c57648@changeid
[Benjamin fixed some locking]
Co-developed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
[fix sta mutex locking too]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For multi-link operation(MLO) TDLS management
frames need to be transmitted on a specific link.
The TDLS setup request will add BSSID along with
peer address and userspace will pass the link-id
based on BSSID value to the driver(or mac80211).
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.cb3d87c22812.Ia3d15ac4a9a182145bf2d418bcb3ddf4539cd0a7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-Wstringop-overflow is legitimately warning us about extra_size
pontentially being zero at some point, hence potenially ending
up _allocating_ zero bytes of memory for extra pointer and then
trying to access such object in a call to copy_from_user().
Fix this by adding a sanity check to ensure we never end up
trying to allocate zero bytes of data for extra pointer, before
continue executing the rest of the code in the function.
Address the following -Wstringop-overflow warning seen when built
m68k architecture with allyesconfig configuration:
from net/wireless/wext-core.c:11:
In function '_copy_from_user',
inlined from 'copy_from_user' at include/linux/uaccess.h:183:7,
inlined from 'ioctl_standard_iw_point' at net/wireless/wext-core.c:825:7:
arch/m68k/include/asm/string.h:48:25: warning: '__builtin_memset' writing 1 or more bytes into a region of size 0 overflows the destination [-Wstringop-overflow=]
48 | #define memset(d, c, n) __builtin_memset(d, c, n)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/uaccess.h:153:17: note: in expansion of macro 'memset'
153 | memset(to + (n - res), 0, res);
| ^~~~~~
In function 'kmalloc',
inlined from 'kzalloc' at include/linux/slab.h:694:9,
inlined from 'ioctl_standard_iw_point' at net/wireless/wext-core.c:819:10:
include/linux/slab.h:577:16: note: at offset 1 into destination object of size 0 allocated by '__kmalloc'
577 | return __kmalloc(size, flags);
| ^~~~~~~~~~~~~~~~~~~~~~
This help with the ongoing efforts to globally enable
-Wstringop-overflow.
Link: https://github.com/KSPP/linux/issues/315
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZItSlzvIpjdjNfd8@work
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There several transitions to handle in eSR mode:
* SMPS should be disabled when in eSR mode
* indicate to the fw whether the new added link should use the
listen lmac or the main lmac
* RLC is offloaded when in eSR mode; adjust RLC command accordingly
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.fb6409f44aca.I502460dec15e0b76035ad3cd809afa4ac16e9fe1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The max active links that are supported by the FW is hard coded.
This is wrong since this value is HW-dependent. Fix this by
determining according to the actual HW.
Also remove a redundant check that the number of active links
doesn't exceeds the maximum.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.e78ad74c6715.I68b26911c0a312d72eaf25344b448d03b1c61f4e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In mesh mode, ieee80211_chandef_he_6ghz_oper() is called by
mesh_matches_local() for every received mesh beacon.
On a 6 GHz mesh of a HE-only phy, this spams that the hardware does not
have EHT capabilities, even if the received mesh beacon does not have an
EHT element.
Unlike HE, not supporting EHT in the 6 GHz band is not an error so do
not print anything in this case.
Fixes: 5dca295dd7 ("mac80211: Add initial support for EHT and 320 MHz channels")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230614132648.28995-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Validate index before access iwl_rate_mcs to keep rate->index
inside the valid boundaries. Use MCS_0_INDEX if index is less
than MCS_0_INDEX and MCS_9_INDEX if index is greater then
MCS_9_INDEX.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.79f16b3aef32.If1137f894775d6d07b78cbf3a6163ffce6399507@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the AP is an AP MLD, then we shouldn't track just the BSSID
but the MLD address. Just generally use ap_addr since it has
the BSSID in the non-MLD case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.b6a4f7edd10c.Ie5a8029ed686b9441620ba06596d430432f65559@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We skipped this in the past, but now we will need it for some
platforms. Implement loading the PHY filter configuration IDs
from the WPFC ACPI table. Note that the firmware must also be
aware of the right filter configuration IDs (they're just the
IDs of a filter configuration, not the actual configuration).
Remove the useless hardcoded zeroes while at it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.035026ea3169.I3a1fc1fe644fefa0d818ee1926c5fc331d68e8a3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rxq can be NULL only when trans_pcie->rxq is NULL and entry->entry
is zero. For the case when entry->entry is not equal to 0, rxq
won't be NULL even if trans_pcie->rxq is NULL. Modify checker to
check for trans_pcie->rxq.
Fixes: abc599efa6 ("iwlwifi: pcie: don't crash when rx queues aren't allocated in interrupt")
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.5a5eb3889a4a.I375a1d58f16b48cd2044e7b7caddae512d7c86fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the firmware misbehaves (according to the driver), we
often either ignore that, or WARN_ON, which is very noisy
but doesn't really help.
Add a little helper macro IWL_FW_CHECK() that can be used
in place of WARN_ON() in conditions, and make it take a
message that's printed in this case. We can also add more
behaviour to this in the future.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.2e12ac670cea.Ia0198036b7a626876d836bd41a4b2d2b1e65c5ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware technically only needs this when the link is
newly added, but it's much easier for debugging if it's
always available, so include it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.daecd0e626f7.I0f8a16a6d80a283c9f947c9bb0fc50a7c6853948@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When calling iwl_mvm_set_fw_qos_params() we explicitly pass
a pointer to the first array element, but the function will
treat it as an array. Simplify and clarify the code and pass
the array instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.6fb4a9743b1b.I801007d207f6539a9e0996366ec593e2038b1f90@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have the data structure set up to store the parameters
per link, but weren't using them. Fix that and store them
in the right link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.332c4949a1be.Icae03975d578b0cc82279911a1ea7cbc313046d6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Again, during some (botched) FW restart scenarios we can end
up with a NULL link in the driver but mac80211 thinking all
is still going OK. If we try to TX at the same time, we can
crash there. Fix that by checking for a NULL link during TX.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.cee48479deec.I4eef58f7b67afafb7b3294adbeb6e0067b68419d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We've observed that in some botched firmware restart scenarios
when the firmware crashes again while we're reconfiguring, we
can hit NULL pointer crashes here. The underlying issue is the
botched restart which we need to fix separately, but until we
can do that, don't crash hard here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.e47b0192c78f.I67fa9f07cd1c8b3bdc8db25f5e31c1c680c49745@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On fw error dump, dmesg prints FSEQ register data. Add 4
additional prints in order to match those being dumped
by Windows driver. Allows fw infra to correctly detect
version mismatch.
Signed-off-by: Ariel Malamud <ariel.malamud@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.f40dc9c810a8.I26227900d0b7e9a71fefe5cbf57cf6b46ee44413@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are evidently cases where the firmware completes the
reset but the interrupt isn't received correctly, so check
for the interrupt again after the timeout, and don't dump
the firmware error log if the right bit is set.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.00cc2d9b88c3.I429bfe800f17c624e50c0b0c10dd2cd7d885f199@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In mac80211, it's required that we pull from TXQs by calling
ieee80211_tx_dequeue() only with softirqs disabled. However,
in iwl_mvm_queue_state_change() we're often called with them
enabled, e.g. from flush if anything was flushed, triggering
a mac80211 warning.
Fix that by disabling the softirqs across the TX call.
Fixes: cfbc6c4c5b ("iwlwifi: mvm: support mac80211 TXQs model")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.0feef7fa81db.I4dd62542d955b40dd8f0af34fa4accb9d0d17c7e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have this helper now instead of open-coding the check for
the dmi_tas_approved_list, so use it even here. It was added
for debugfs use, but it's better to be consistent.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.f3741f5cdef4.I5e0bf522189dc595ee38d05e93994211d32ec0f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_acpi_get_wifi_pkg_range(), iwl_acpi_get_wifi_pkg() and
iwl_acpi_get_object() need not be exported etc., they're used
only within the same file. Make them static.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.e866032e4106.Ifede7f7c25b17a8215b154ce01da513b75384325@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We can't just dereference the sband->iftype_data pointer,
that's an array so we need to access the right entry. Use
the previously introduced helper functions to do that.
There are also cases, e.g. when loading with disable_11ax=1,
where the pointer might be NULL but we still attempt to use
it, causing a crash.
Fixes: 529281bdf0 ("iwlwifi: mvm: limit TLC according to our HE capabilities")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.a1f2b17ee39b.I8808120be744be8804815ce9e3e24ce6d2b424e3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
While vif pointers are protected by the corresponding "*active"
fields, static checkers can get confused sometimes. Add an explicit
check.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614154951.78749ae91fb5.Id3c05d13eeee6638f0930f750e93fb928d5c9dee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are some locking changes that will later otherwise
cause conflicts, so merge wireless into wireless-next to
avoid those.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
