This patch extends the "ethtool_ops" data structure to
include the "set_link_ksettings" callback. This change
enables configuration of the various interface speeds
that the BlueField-3 supports (10Mbps, 100Mbps, and 1Gbps).
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The BlueField-3 OOB interface supports 10Mbps, 100Mbps, and 1Gbps speeds.
The external PHY is responsible for autonegotiating the speed with the
link partner. Once the autonegotiation is done, the BlueField PLU needs
to be configured accordingly.
This patch does two things:
1) Initialize the advertised control flow/duplex/speed in the probe
based on the BlueField SoC generation (2 or 3)
2) Adjust the PLU speed config in the PHY interrupt handler
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds initial MDIO support for the BlueField-3
SoC. Separate header files for the BlueField-2 and the
BlueField-3 SoCs have been created. These header files
hold the SoC-specific MDIO macros since the register
offsets and bit fields have changed. Also, in BlueField-3
there is a separate register for writing and reading the
MDIO data. Finally, instead of having "if" statements
everywhere to differentiate between SoC-specific logic,
a mlxbf_gige_mdio_gw_t struct was created for this purpose.
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the phylink_get_link_timer_ns() helper to get the period for the
link timer.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1pFyhW-0067jq-Fh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert a wrong fix that was done during the review process. The
intention was to substitute "if(ret < 0)" with "if(ret)".
Unfortunately, the intended fix did not meet the code.
Besides, after additional review, it was decided that "if(ret < 0)"
was actually the right thing to do.
Fixes: 8580e16c28 ("net/ethtool: add netlink interface for the PLCA RS")
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/f2277af8951a51cfee2fb905af8d7a812b7beaf4.1673616357.git.piergiorgio.beruto@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Walle says:
====================
net: mdio: Continue separating C22 and C45
I've picked this older series from Andrew up and rebased it onto
the latest net-next.
This is the second patch set in the series which separates the C22
and C45 MDIO bus transactions at the API level to the MDIO bus drivers.
====================
Link: https://lore.kernel.org/r/20230112-net-next-c45-seperation-part-2-v1-0-5eeaae931526@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The enetc MDIO bus driver can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new API calls where appropriate.
This driver is shared with the Felix DSA switch, so update that at the
same time.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The stmmac MDIO bus driver in variant gmac4 can perform both C22 and
C45 transfers. Create separate functions for each and register the
C45 versions using the new API calls where appropriate.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The stmicro stmmac xgmac2 MDIO bus driver can perform both C22 and C45
transfers. Create separate functions for each and register the C45
versions using the new API calls where appropriate.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The microchip lan743x MDIO bus driver can perform both C22 and C45
transfers in some variants. Create separate functions for each and
register the C45 versions using the new API calls where appropriate.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mediatek bus driver can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new API calls.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ipq4019 driver can perform both C22 and C45 transfers. Create
separate functions for each and register the C45 versions using the
new driver API calls.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The aspeed MDIO bus driver can perform both C22 and C45 transfers.
Modify the existing C45 functions to take the devad as a parameter,
and remove the wrappers so there are individual C22 and C45 functions. Add
the C45 functions to the new API calls.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MDIO mux broadcom iproc can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new API calls.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MDIO over I2C bus driver can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new API calls.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cavium IP can perform both C22 and C45 transfers. Create separate
functions for each and register the C45 versions in both the octeon
and thunder bus driver.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add basic DCB IEEE support. This includes support for ETS, max-rate,
and DSCP to user priority mapping.
DCB may be configured using iproute2's dcb command.
Example usage:
dcb ets set dev $dev tc-tsa 0:ets 1:ets 2:ets 3:ets 4:ets 5:ets \
6:ets 7:ets tc-bw 0:0 1:80 2:0 3:0 4:0 5:0 6:20 7:0
dcb maxrate set dev $dev tc-maxrate 1:1000bit
And DCB configuration can be shown using:
dcb ets show dev $dev
dcb maxrate show dev $dev
Signed-off-by: Bin Chen <bin.chen@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230112121102.469739-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to MTK Wireless Ethernet Dispatcher (WED) MCU rx queue,
we do not need to protect WED MCU tx queue with a spin lock since
the tx queue is accessed in the two following routines:
- mtk_wed_wo_queue_tx_skb():
it is run at initialization and during mt7915 normal operation.
Moreover MCU messages are serialized through MCU mutex.
- mtk_wed_wo_queue_tx_clean():
it runs just at mt7915 driver module unload when no more messages
are sent to the MCU.
Remove tx queue spinlock.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/7bd0337b2a13ab1a63673b7c03fd35206b3b284e.1673515140.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The details of the iov_iter types are appropriately abstracted, so
there's no need to check for specific type fields. Just let the
abstractions handle it.
This is preparing for io_uring/net's io_send to utilize the more
efficient ITER_UBUF.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20230111184245.3784393-1-kbusch@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix compatible string for RV1126 gmac, and constrain it to
be compatible with Synopsys dwmac 4.20a.
fix below warning
$ make CHECK_DTBS=y rv1126-edgeble-neu2-io.dtb
arch/arm/boot/dts/rv1126-edgeble-neu2-io.dtb: ethernet@ffc40000:
compatible: 'oneOf' conditional failed, one must be fixed:
['rockchip,rv1126-gmac', 'snps,dwmac-4.20a'] is too long
'rockchip,rv1126-gmac' is not one of ['rockchip,rk3568-gmac', 'rockchip,rk3588-gmac']
Fixes: b36fe2f436 ("dt-bindings: net: rockchip-dwmac: add rv1126 compatible")
Reviewed-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Anand Moon <anand@edgeble.ai>
Link: https://lore.kernel.org/r/20230111172437.5295-1-anand@edgeble.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add 2 tracepoints to monitor the tcp/udp traffic
of per process and per cgroup.
Regarding monitoring the tcp/udp traffic of each process, there are two
existing solutions, the first one is https://www.atoptool.nl/netatop.php.
The second is via kprobe/kretprobe.
Netatop solution is implemented by registering the hook function at the
hook point provided by the netfilter framework.
These hook functions may be in the soft interrupt context and cannot
directly obtain the pid. Some data structures are added to bind packets
and processes. For example, struct taskinfobucket, struct taskinfo ...
Every time the process sends and receives packets it needs multiple
hashmaps,resulting in low performance and it has the problem fo inaccurate
tcp/udp traffic statistics(for example: multiple threads share sockets).
We can obtain the information with kretprobe, but as we know, kprobe gets
the result by trappig in an exception, which loses performance compared
to tracepoint.
We compared the performance of tracepoints with the above two methods, and
the results are as follows:
ab -n 1000000 -c 1000 -r http://127.0.0.1/index.html
without trace:
Time per request: 39.660 [ms] (mean)
Time per request: 0.040 [ms] (mean, across all concurrent requests)
netatop:
Time per request: 50.717 [ms] (mean)
Time per request: 0.051 [ms] (mean, across all concurrent requests)
kr:
Time per request: 43.168 [ms] (mean)
Time per request: 0.043 [ms] (mean, across all concurrent requests)
tracepoint:
Time per request: 41.004 [ms] (mean)
Time per request: 0.041 [ms] (mean, across all concurrent requests
It can be seen that tracepoint has better performance.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Signed-off-by: Xiongchun Duan <duanxiongchun@bytedance.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniele Palmas says:
====================
net: add tx packets aggregation to ethtool and rmnet
Hello maintainers and all,
this patchset implements tx qmap packets aggregation in rmnet and generic
ethtool support for that.
Some low-cat Thread-x based modems are not capable of properly reaching the maximum
allowed throughput both in tx and rx during a bidirectional test if tx packets
aggregation is not enabled.
I verified this problem with rmnet + qmi_wwan by using a MDM9207 Cat. 4 based modem
(50Mbps/150Mbps max throughput). What is actually happening is pictured at
https://drive.google.com/file/d/1gSbozrtd9h0X63i6vdkNpN68d-9sg8f9/view
Testing with iperf TCP, when rx and tx flows are tested singularly there's no issue
in tx and minor issues in rx (not able to reach max throughput). When there are concurrent
tx and rx flows, tx throughput has an huge drop. rx a minor one, but still present.
The same scenario with tx aggregation enabled is pictured at
https://drive.google.com/file/d/1jcVIKNZD7K3lHtwKE5W02mpaloudYYih/view
showing a regular graph.
This issue does not happen with high-cat modems (e.g. SDX20), or at least it
does not happen at the throughputs I'm able to test currently: maybe the same
could happen when moving close to the maximum rates supported by those modems.
Anyway, having the tx aggregation enabled should not hurt.
The first attempt to solve this issue was in qmi_wwan qmap implementation,
see the discussion at https://lore.kernel.org/netdev/20221019132503.6783-1-dnlplm@gmail.com/
However, it turned out that rmnet was a better candidate for the implementation.
Moreover, Greg and Jakub suggested also to use ethtool for the configuration:
not sure if I got their advice right, but this patchset add also generic ethtool
support for tx aggregation.
The patches have been tested mainly against an MDM9207 based modem through USB
and SDX55 through PCI (MHI).
v2 should address the comments highlighted in the review: the implementation is
still in rmnet, due to Subash's request of keeping tx aggregation there.
v3 fixes ethtool-netlink.rst content out of table bounds and a W=1 build warning
for patch 2.
v4 solves a race related to egress_agg_params.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for ETHTOOL_COALESCE_TX_AGGR for configuring the tx
aggregation settings.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tx packets aggregation.
Bidirectional TCP throughput tests through iperf with low-cat
Thread-x based modems revelead performance issues both in tx
and rx.
The Windows driver does not show this issue: inspecting USB
packets revealed that the only notable change is the driver
enabling tx packets aggregation.
Tx packets aggregation is by default disabled and can be enabled
by increasing the value of ETHTOOL_A_COALESCE_TX_MAX_AGGR_FRAMES.
The maximum aggregated size is by default set to a reasonably low
value in order to support the majority of modems.
This implementation is based on patches available in Code Aurora
repositories (msm kernel) whose main authors are
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Reviewed-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the following ethtool tx aggregation parameters:
ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES
Maximum size in bytes of a tx aggregated block of frames.
ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES
Maximum number of frames that can be aggregated into a block.
ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS
Time in usecs after the first packet arrival in an aggregated
block for the block to be sent.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arun Ramadoss says:
====================
net: dsa: microchip: add PTP support for KSZ9563/KSZ8563 and LAN937x
KSZ9563/KSZ8563 and LAN937x switch are capable for supporting IEEE 1588 PTP
protocol. LAN937x has the same PTP register set similar to KSZ9563, hence the
implementation has been made common for the KSZ switches. KSZ9563 does not
support two step timestamping but LAN937x supports both. Tested the 1step &
2step p2p timestamping in LAN937x and p2p1step timestamping in KSZ9563.
This patch series is based on the Christian Eggers PTP support for KSZ9563.
Applied the Christian patch and updated as per the latest refactoring of KSZ
series code. The features added on top are PTP packet Interrupt
implementation based on nested handler, LAN937x two step timestamping and
programmable per_out pins.
Link: https://www.spinics.net/lists/netdev/msg705531.html
Patch v7 -> v8
- set skb->ip_summed = CHECKSUM_NONE after updating the checksum
Patch v6 -> v7
- Corrected the misplaced spaces and tabs
- Added mutex lock in do_aux_work
- Replaced 0/1 with false/true for ts_en
- SKB_TX_INPROGRESS flag is set before dsa_enqueue_skb
- Removed the fallthrough keyword
- pdelay_resp header correction is performed based on
KSZ_SKB_CB(skb)->update_correction instead of clone
Patch v5 -> v6
- Rebased to latest net-next and renamed from RFC to patch net-next.
Patch v4 -> v5
- Replaced irq_domain_add_simple with irq_doamin_add_linear
- Used the helper diff_by_scaled_ppm() for adjfine.
Patch v3 -> v4
- removed IRQF_TRIGGER_FALLING from the request_threaded_irq of ptp msg
- addressed review comments on patch 10 periodic output
- added sign off in patch 6 & 9
- reverted to set PTP_1STEP bit for lan937x which is missed during v3 regression
Patch v2-> v3
- used port_rxtstamp for reconstructing the absolute timestamp instead of
tagger function pointer.
- Reverted to setting of 802.1As bit.
Patch v1 -> v2
- GPIO perout enable bit is different for LAN937x and KSZ9x. Added new patch
for configuring LAN937x programmable pins.
- PTP enabled in hardware based on both tx and rx timestamping of all the user
ports.
- Replaced setting of 802.1AS bit with P2P bit in PTP_MSG_CONF1 register.
RFC v2 -> Patch v1
- Changed the patch author based on past patch submission
- Changed the commit message prefix as net: dsa: microchip: ptp
Individual patch changes are listed in correspondig commits.
RFC v1 -> v2
- Added the p2p1step timestamping and conditional execution of 2 step for
LAN937x only.
- Added the periodic output support
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There is difference in implementation of per_out pins between KSZ9563
and LAN937x. In KSZ9563, Timestamping control register (0x052C) bit 6,
if 1 - timestamp input and 0 - trigger output. But it is opposite for
LAN937x 1 - trigger output and 0 - timestamp input.
As per per_out gpio pins, KSZ9563 has four Led pins and two dedicated
gpio pins. But in LAN937x dedicated gpio pins are removed instead there
are up to 10 LED pins out of which LED_0 and LED_1 can be mapped to PTP
tou 0, 1 or 2. This patch sets the bit 6 in 0x052C register and
configure the LED override and source register for LAN937x series of
switches alone.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
LAN937x series of switches support 2 step timestamping mechanism. There
are timestamp correction calculation performed in ksz_rcv_timestamp and
ksz_xmit_timestamp which are applicable only for p2p1step. To check
whether the 2 step is enabled or not in tag_ksz.c introduced the helper
function in taggger_data to query it from ksz_ptp.c. Based on whether 2
step is enabled or not, timestamp calculation are performed.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two programmable pins available for Trigger output unit to
generate periodic pulses. This patch add verify_pin for the available 2
pins and configure it with respect to GPIO index for the TOU unit.
Tested using testptp
./testptp -i 0 -L 0,2
./testptp -i 0 -d /dev/ptp0 -p 1000000000
./testptp -i 1 -L 1,2
./testptp -i 1 -d /dev/ptp0 -p 100000000
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
LAN937x and KSZ PTP supported switches has Three Trigger output unit.
This TOU can used to generate the periodic signal for PTP. TOU has the
cycle width register of 32 bit in size and period width register of 24
bit, each value is of 8ns so the pulse width can be maximum 125ms.
Tested using ./testptp -d /dev/ptp0 -p 1000000000 -w 100000000 for
generating the 10ms pulse width
Signed-off-by: Christian Eggers <ceggers@arri.de>
Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For PDelay_Resp messages we will likely have a negative value in the
correction field. The switch hardware cannot correctly update such
values (produces an off by one error in the UDP checksum), so it must be
moved to the time stamp field in the tail tag. Format of the correction
field is 48 bit ns + 16 bit fractional ns. After updating the
correction field, clone is no longer required hence it is freed.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the routines for transmission of ptp packets. When the
ptp pdelay_req packet to be transmitted, it uses the deferred xmit
worker to schedule the packets.
During irq_setup, interrupt for Sync, Pdelay_req and Pdelay_rsp are
enabled. So interrupt is triggered for all three packets. But for
p2p1step, we require only time stamp of Pdelay_req packet. Hence to
avoid posting of the completion from ISR routine for Sync and
Pdelay_resp packets, ts_en flag is introduced. This controls which
packets need to processed for timestamp.
After the packet is transmitted, ISR is triggered. The time at which
packet transmitted is recorded to separate register.
This value is reconstructed to absolute time and posted to the user
application through socket error queue.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rx Timestamping is done through 4 additional bytes in tail tag.
Whenever the ptp packet is received, the 4 byte hardware time stamped
value is added before 1 byte tail tag. Also, bit 7 in tail tag indicates
it as PTP frame. This 4 byte value is extracted from the tail tag and
reconstructed to absolute time and assigned to skb hwtstamp.
If the packet received in PDelay_Resp, then partial ingress timestamp
is subtracted from the correction field. Since user space tools expects
to be done in hardware.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For P2P delay measurement, the ingress time stamp of the PDelay_Req is
required for the correction field of the PDelay_Resp. The application
echoes back the correction field of the PDelay_Req when sending the
PDelay_Resp.
Some hardware (like the ZHAW InES PTP time stamping IP core) subtracts
the ingress timestamp autonomously from the correction field, so that
the hardware only needs to add the egress timestamp on tx. Other
hardware (like the Microchip KSZ9563) reports the ingress time stamp via
an interrupt and requires that the software provides this time stamp via
tail-tag on tx.
In order to avoid introducing a further application interface for this,
the driver can simply emulate the behavior of the InES device and
subtract the ingress time stamp in software from the correction field.
On egress, the correction field can either be kept as it is (and the
time stamp field in the tail-tag is set to zero) or move the value from
the correction field back to the tail-tag.
Changing the correction field requires updating the UDP checksum (if UDP
is used as transport).
Signed-off-by: Christian Eggers <ceggers@arri.de>
Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PTP Interrupt mask and status register differ from the global and port
interrupt mechanism by two methods. One is that for global/port
interrupt enabling we have to clear the bit but for ptp interrupt we
have to set the bit. And other is bit12:0 is reserved in ptp interrupt
registers. This forced to not use the generic implementation of
global/port interrupt method routine. This patch implement the ptp
interrupt mechanism to read the timestamp register for sync, pdelay_req
and pdelay_resp.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is used for reconstructing the absolute time from the 32bit
hardware time stamping value. The do_aux ioctl is used for reading the
ptp hardware clock and store it to global variable.
The timestamped value in tail tag during rx and register during tx are
32 bit value (2 bit seconds and 30 bit nanoseconds). The time taken to
read entire ptp clock will be time consuming. In order to speed up, the
software clock is maintained. This clock time will be added to 32 bit
timestamp to get the absolute time stamp.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the PTP is enabled in hardware bit 6 of PTP_MSG_CONF1 register, the
transmit frame needs additional 4 bytes before the tail tag. It is
needed for all the transmission packets irrespective of PTP packets or
not.
The 4-byte timestamp field is 0 for frames other than Pdelay_Resp. For
the one-step Pdelay_Resp, the switch needs the receive timestamp of the
Pdelay_Req message so that it can put the turnaround time in the
correction field.
Since PTP has to be enabled for both Transmission and reception
timestamping, driver needs to track of the tx and rx setting of the all
the user ports in the switch.
Two flags hw_tx_en and hw_rx_en are added in ksz_port to track the
timestampping setting of each port. When any one of ports has tx or rx
timestampping enabled, bit 6 of PTP_MSG_CONF1 is set and it is indicated
to tag_ksz.c through tagger bytes. This flag adds 4 additional bytes to
the tail tag. When tx and rx timestamping of all the ports are disabled,
then 4 bytes are not added.
Tested using hwstamp -i <interface>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com> # mostly api
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the routine for get_ts_info, hwstamp_get, set. This enables
the PTP support towards userspace applications such as linuxptp.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implement routines (adjfine, adjtime, gettime and settime)
for manipulating the chip's PTP clock. It registers the ptp caps
to posix clock register.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Co-developed-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com> # mostly api
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Emeel Hakim says:
====================
Add support to offload macsec using netlink update
This series adds support for offloading macsec as part of the netlink
update routine, command example:
$ ip link set link eth2 macsec0 type macsec offload mac
The above is done using the IFLA_MACSEC_OFFLOAD attribute hence
the second patch of dumping this attribute as part of the macsec
dump.
====================
Link: https://lore.kernel.org/r/20230111150210.8246-1-ehakim@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support dumping offload netlink attribute in macsec's device
attributes dump.
Change macsec_get_size to consider the offload attribute in
the calculations of the required room for dumping the device
netlink attributes.
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for changing Macsec offload selection through the
netlink layer by implementing the relevant changes in
macsec_changelink.
Since the handling in macsec_changelink is similar to macsec_upd_offload,
update macsec_upd_offload to use a common helper function to avoid
duplication.
Example for setting offload for a macsec device:
ip link set macsec0 type macsec offload mac
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While reviewing dependencies in some Kconfig files, I noticed the redundant
dependency "depends on PCI && PCI_MSI". The config PCI_MSI has always,
since its introduction, been dependent on the config PCI. So, it is
sufficient to just depend on PCI_MSI, and know that the dependency on PCI
is implicitly implied.
Reduce the dependencies of some network driver configs.
No functional change and effective change of Kconfig dependendencies.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Dimitris Michailidis <dmichail@fungible.com>
Link: https://lore.kernel.org/r/20230111125855.19020-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add mdio bus register for ngbe.
The internal phy and external phy need to be handled separately.
Add phy changed event detection.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230111111718.40745-1-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mika Westerberg says:
====================
net: thunderbolt: Add tracepoints
This series adds tracepoints and additional logging to the
Thunderbolt/USB4 networking driver. These are useful when debugging
possible issues.
Before that we move the driver into its own directory under drivers/net
so that we can add additional files without trashing the network drivers
main directory, and update the MAINTAINERS accordingly.
v1: https://lore.kernel.org/netdev/20230104081731.45928-1-mika.westerberg@linux.intel.com/
====================
Link: https://lore.kernel.org/r/20230111062633.1385-1-mika.westerberg@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These are useful when debugging various performance issues.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These can be useful when debugging possible issues around USB4NET
control packet exchange.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will be adding tracepoints to the driver so instead of littering the
main network driver directory, move the driver into its own directory.
While there, rename the module to thunderbolt_net (with underscore) to
match with the thunderbolt_dma_test convention.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are no more users of the obsolete interface
u64_stats_fetch_begin_irq() and u64_stats_fetch_retry_irq().
Remove the obsolete API.
[bigeasy: Split out the bits from a larger patch].
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20230110160738.974085-1-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
