Fix update Rx SA wrong bail condition, naturally update functionality
needs to check that something changed otherwise bailout currently the
active state check does just the opposite, furthermore unlike deactivate
path which remove the macsec rules to deactivate the offload, the
activation path does not include the counter part installation of the
macsec rules.
Fix by using correct bailout condition and when Rx SA changes state to
active then add the relevant macsec rules.
While at it, refine function name to reflect more precisely its role.
Fixes: aae3454e4d ("net/mlx5e: Add MACsec offload Rx command support")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The main functionality for this operation is to update the
active state of the Rx security channel (SC) if the new
active setting is different from the current active state
of this Rx SC, however the relevant active state check is
done post updating the current active state to match the
new active state, effectively blocks any offload state
update for the Rx SC in question.
Fix by delay the assignment to be post the relevant check.
Fixes: aae3454e4d ("net/mlx5e: Add MACsec offload Rx command support")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When the MACsec netdevice is deleted, all related Rx/Tx HW/SW
states should be released/deallocated, however currently part
of the Rx security channel association data is not cleaned
properly, hence the memory leaks.
Fix by make sure all related Rx Sc resources are cleaned/freed,
while at it improve code by grouping release SC context in a
function so it can be used in both delete MACsec device and
delete Rx SC operations.
Fixes: 5a39816a75 ("net/mlx5e: Add MACsec offload SecY support")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently the data path metadata flow id mask wrongly limits the
number of different RX security channels (SC) to 16, whereas in
adding RX SC the limit is "2^16 - 1" this cause an overlap in
metadata flow id once more than 16 RX SCs is added, this corrupts
MACsec RX offloaded flow handling.
Fix by using the correct mask, while at it improve code to use this
mask when adding the Rx rule and improve visibility of such errors
by adding debug massage.
Fixes: b7c9400cbc ("net/mlx5e: Implement MACsec Rx data path using MACsec skb_metadata_dst")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When having multiple dests with termination tables and second one
or afterwards fails the driver reverts usage of term tables but
doesn't reset the assignment in attr->dests[num_vport_dests].termtbl
which case a use-after-free when releasing the rule.
Fix by resetting the assignment of termtbl to null.
Fixes: 10caabdaad ("net/mlx5e: Use termination table for VLAN push actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
If sscanf() return 0, outlen is uninitialized and used in kzalloc(),
this is unexpected. We should return -EINVAL if the string is invalid.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
If creating bond first and then enabling sriov in switchdev mode,
will hit the following syndrome:
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:778:(pid 25543): CREATE_LAG(0x840) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x7d49cb), err(-22)
The reason is because the offending patch removes eswitch mode
none. In vf lag, the checking of eswitch mode none is replaced
by checking if sriov is enabled. But when driver enables sriov,
it triggers the bond workqueue task first and then setting sriov
number in pci_enable_sriov(). So the check fails.
Fix it by checking if sriov is enabled using eswitch internal
counter that is set before triggering the bond workqueue task.
Fixes: f019679ea5 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The cited commit removes eswitch mode none. But when disabling
sriov in legacy mode or changing from switchdev to legacy mode
without sriov enabled, the legacy fdb table is not destroyed.
It is not the right behavior. Destroy legacy fdb table in above
two caes.
Fixes: f019679ea5 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
As the devm_kcalloc may return NULL pointer,
it should be better to add check for the return
value, as same as the others.
Fixes: e8e095b3b3 ("octeontx2-af: cn10k: Bandwidth profiles config support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20221122055449.31247-1-jiasheng@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the blamed commit, a rudimentary reallocation procedure for RX buffer
descriptors was implemented, for the situation when their format changes
between normal (no PTP) and extended (PTP).
enetc_hwtstamp_set() calls enetc_close() and enetc_open() in a sequence,
and this sequence loses information which was previously configured in
the TX BDR Mode Register, specifically via the enetc_set_bdr_prio() call.
The TX ring priority is configured by tc-mqprio and tc-taprio, and
affects important things for TSN such as the TX time of packets. The
issue manifests itself most visibly by the fact that isochron --txtime
reports premature packet transmissions when PTP is first enabled on an
enetc interface.
Save the TX ring priority in a new field in struct enetc_bdr (occupies a
2 byte hole on arm64) in order to make this survive a ring reconfiguration.
Fixes: 434cebabd3 ("enetc: Add dynamic allocation of extended Rx BD rings")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/r/20221122130936.1704151-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Faltesek says:
====================
nfc: st-nci: Restructure validating logic in EVT_TRANSACTION
These are the same 3 patches that were applied in st21nfca here:
https://lore.kernel.org/netdev/20220607025729.1673212-1-mfaltesek@google.com
with a couple minor differences.
st-nci has nearly identical code to that of st21nfca for EVT_TRANSACTION,
except that there are two extra validation checks that are not present
in the st-nci code.
The 3/3 patch as coded for st21nfca pulls those checks in, bringing both
drivers into parity.
====================
Link: https://lore.kernel.org/r/20221122004246.4186422-1-mfaltesek@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The transaction buffer is allocated by using the size of the packet buf,
and subtracting two which seems intended to remove the two tags which are
not present in the target structure. This calculation leads to under
counting memory because of differences between the packet contents and the
target structure. The aid_len field is a u8 in the packet, but a u32 in
the structure, resulting in at least 3 bytes always being under counted.
Further, the aid data is a variable length field in the packet, but fixed
in the structure, so if this field is less than the max, the difference is
added to the under counting.
To fix, perform validation checks progressively to safely reach the
next field, to determine the size of both buffers and verify both tags.
Once all validation checks pass, allocate the buffer and copy the data.
This eliminates freeing memory on the error path, as validation checks are
moved ahead of memory allocation.
Reported-by: Denis Efremov <denis.e.efremov@oracle.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Fixes: 5d1ceb7f5e ("NFC: st21nfcb: Add HCI transaction event support")
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The first validation check for EVT_TRANSACTION has two different checks
tied together with logical AND. One is a check for minimum packet length,
and the other is for a valid aid_tag. If either condition is true (fails),
then an error should be triggered. The fix is to change && to ||.
Reported-by: Denis Efremov <denis.e.efremov@oracle.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Fixes: 5d1ceb7f5e ("NFC: st21nfcb: Add HCI transaction event support")
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
ipsec 2022-11-23
1) Fix "disable_policy" on ipv4 early demuxP Packets after
the initial packet in a flow might be incorectly dropped
on early demux if there are no matching policies.
From Eyal Birger.
2) Fix a kernel warning in case XFRM encap type is not
available. From Eyal Birger.
3) Fix ESN wrap around for GSO to avoid a double usage of a
sequence number. From Christian Langrock.
4) Fix a send_acquire race with pfkey_register.
From Herbert Xu.
5) Fix a list corruption panic in __xfrm_state_delete().
Thomas Jarosch.
6) Fix an unchecked return value in xfrm6_init().
Chen Zhongjin.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Fix ignored return value in xfrm6_init()
xfrm: Fix oops in __xfrm_state_delete()
af_key: Fix send_acquire race with pfkey_register
xfrm: replay: Fix ESN wrap around for GSO
xfrm: lwtunnel: squelch kernel warning in case XFRM encap type is not available
xfrm: fix "disable_policy" on ipv4 early demux
====================
Link: https://lore.kernel.org/r/20221123093117.434274-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix regression in ipset hash:ip with IPv4 range, from Vishwanath Pai.
This is fixing up a bug introduced in the 6.0 release.
2) The "netfilter: ipset: enforce documented limit to prevent allocating
huge memory" patch contained a wrong condition which makes impossible to
add up to 64 clashing elements to a hash:net,iface type of set while it
is the documented feature of the set type. The patch fixes the condition
and thus makes possible to add the elements while keeps preventing
allocating huge memory, from Jozsef Kadlecsik. This has been broken
for several releases.
3) Missing locking when updating the flow block list which might lead
a reader to crash. This has been broken since the introduction of the
flowtable hardware offload support.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: flowtable_offload: add missing locking
netfilter: ipset: restore allowing 64 clashing elements in hash:net,iface
netfilter: ipset: regression in ip_set_hash_ip.c
====================
Link: https://lore.kernel.org/r/20221122212814.63177-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The documentation refers to invalid web page under www.linuxfoundation.org
The patch refers to a working URL under wiki.linuxfoundation.org
Signed-off-by: Nir Levy <bhr166@gmail.com>
Link: https://lore.kernel.org/all/20221120220630.7443-1-bhr166@gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ZLP for DisplayLink ethernet devices was enabled in 6.0:
266c0190ae ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices").
The related driver_info should be the "same as cdc_ncm_info, but with
FLAG_SEND_ZLP". However, set_rx_mode that enables handling multicast
traffic was missing in the new cdc_ncm_zlp_info.
usbnet_cdc_update_filter rx mode was introduced in linux 5.9 with:
e10dcb1b6b ("net: cdc_ncm: hook into set_rx_mode to admit multicast
traffic")
Without this hook, multicast, and then IPv6 SLAAC, is broken.
Fixes: 266c0190ae ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices")
Signed-off-by: Santiago Ruano Rincón <santiago.ruano-rincon@imt-atlantique.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add RmNet support for LARA-L6.
LARA-L6 module can be configured (by AT interface) in three different
USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial
interface and 1 CDC-ECM virtual network interface
In RmNet mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: RMNET interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
When holding a reader-writer spin lock we cannot sleep. Calling
setup_udp_tunnel_sock() with write lock held violates this rule, because we
end up calling percpu_down_read(), which might sleep, as syzbot reports
[1]:
__might_resched.cold+0x222/0x26b kernel/sched/core.c:9890
percpu_down_read include/linux/percpu-rwsem.h:49 [inline]
cpus_read_lock+0x1b/0x140 kernel/cpu.c:310
static_key_slow_inc+0x12/0x20 kernel/jump_label.c:158
udp_tunnel_encap_enable include/net/udp_tunnel.h:187 [inline]
setup_udp_tunnel_sock+0x43d/0x550 net/ipv4/udp_tunnel_core.c:81
l2tp_tunnel_register+0xc51/0x1210 net/l2tp/l2tp_core.c:1509
pppol2tp_connect+0xcdc/0x1a10 net/l2tp/l2tp_ppp.c:723
Trim the writer-side critical section for sk_callback_lock down to the
minimum, so that it covers only operations on sk_user_data.
Also, when grabbing the sk_callback_lock, we always need to disable BH, as
Eric points out. Failing to do so leads to deadlocks because we acquire
sk_callback_lock in softirq context, which can get stuck waiting on us if:
1) it runs on the same CPU, or
CPU0
----
lock(clock-AF_INET6);
<Interrupt>
lock(clock-AF_INET6);
2) lock ordering leads to priority inversion
CPU0 CPU1
---- ----
lock(clock-AF_INET6);
local_irq_disable();
lock(&tcp_hashinfo.bhash[i].lock);
lock(clock-AF_INET6);
<Interrupt>
lock(&tcp_hashinfo.bhash[i].lock);
... as syzbot reports [2,3]. Use the _bh variants for write_(un)lock.
[1] https://lore.kernel.org/netdev/0000000000004e78ec05eda79749@google.com/
[2] https://lore.kernel.org/netdev/000000000000e38b6605eda76f98@google.com/
[3] https://lore.kernel.org/netdev/000000000000dfa31e05eda76f75@google.com/
v2:
- Check and set sk_user_data while holding sk_callback_lock for both
L2TP encapsulation types (IP and UDP) (Tetsuo)
Cc: Tom Parkin <tparkin@katalix.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Fixes: b68777d54f ("l2tp: Serialize access to sk_user_data with sk_callback_lock")
Reported-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+703d9e154b3b58277261@syzkaller.appspotmail.com
Reported-by: syzbot+50680ced9e98a61f7698@syzkaller.appspotmail.com
Reported-by: syzbot+de987172bb74a381879b@syzkaller.appspotmail.com
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dm9051_loop_rx() returns without release skb when dm9051_stop_mrcmd()
returns error, free the skb to avoid this leak.
Fixes: 2dc95a4d30 ("net: Add dm9051 driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In com20020_probe(), if com20020_config() fails, dev and info
will not be freed, which will lead to a memory leak.
This patch adds freeing dev and info after com20020_config()
fails to fix this bug.
Compile tested only.
Fixes: 15b99ac172 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmN8MIsACgkQSD+KveBX
+j6HLAf+JYTnln3GG5Keifdzfnl2kuA8CzdqvAbK4K+0xcYzAMqyu3/gx+THFh6+
SkF6ZBmn9vxDEilZXA9D9g3BmxoHZARP0LOCDa+CWpzYY1IoGVL2JMMUqJ4TRscC
dp0KnGX8FzsMwIxfqQaULZsjd2v90xrBPiyGfNY7ydprKvyLbpPbSvbkVoa/APo6
vXxXTIoK7cepLF/nLwBqLhDrmt/asGcOhcVFXDLKMCYG/TvPelzRRmFvgh/yW3Zn
p6d8DO+2Jd3oPujS93WgLEVzGvfO8Bkwx2b4WVvFo+GoZ7g9EeZoQqDhihVnq6i8
uX4JhYqb0Dp41TyJJ/OrpFeM9ko+6g==
=SMAf
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2022-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-11-21
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix possible race condition in macsec extended packet number update routine
net/mlx5e: Fix MACsec update SecY
net/mlx5e: Fix MACsec SA initialization routine
net/mlx5e: Remove leftovers from old XSK queues enumeration
net/mlx5e: Offload rule only when all encaps are valid
net/mlx5e: Fix missing alignment in size of MTT/KLM entries
net/mlx5: Fix sync reset event handler error flow
net/mlx5: E-Switch, Set correctly vport destination
net/mlx5: Lag, avoid lockdep warnings
net/mlx5: Fix handling of entry refcount when command is not issued to FW
net/mlx5: cmdif, Print info on any firmware cmd failure to tracepoint
net/mlx5: SF: Fix probing active SFs during driver probe phase
net/mlx5: Fix FW tracer timestamp calculation
net/mlx5: Do not query pci info while pci disabled
====================
Link: https://lore.kernel.org/r/20221122022559.89459-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In fib_table_insert(), if the alias was already inserted, but node not
exist, the error code should be set before return from error handling path.
Fixes: a6c76c17df ("ipv4: Notify route after insertion to the routing table")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/r/20221120072838.2167047-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mtk_ppe_init(), when dmam_alloc_coherent() or devm_kzalloc() failed,
the rhashtable ppe->l2_flows isn't destroyed. Fix it.
In mtk_probe(), when mtk_ppe_init() or mtk_eth_offload_init() or
register_netdev() failed, have the same problem. Fix it.
Fixes: 33fc42de33 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Yan Cangang <nalanzeyu@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mtk_probe(), when mtk_ppe_init() or mtk_eth_offload_init() failed,
mtk_mdio_cleanup() isn't called. Fix it.
Fixes: ba37b7caf1 ("net: ethernet: mtk_eth_soc: add support for initializing the PPE")
Fixes: 502e84e238 ("net: ethernet: mtk_eth_soc: add flow offloading support")
Signed-off-by: Yan Cangang <nalanzeyu@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When fail to dma_map_single() in mtk_rx_alloc(), it returns directly.
But the memory allocated for local variable data is not freed, and
local variabel data has not been attached to ring->data[i] yet, so the
memory allocated for local variable data will not be freed outside
mtk_rx_alloc() too. Thus memory leak would occur in this scenario.
Add skb_free_frag(data) when dma_map_single() failed.
Fixes: 23233e577e ("net: ethernet: mtk_eth_soc: rely on page_pool for single page buffers")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Link: https://lore.kernel.org/r/20221120035405.1464341-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we call connect() for a socket bound to a wildcard address, we update
saddr locklessly. However, it could result in a data race; another thread
iterating over bhash might see a corrupted address.
Let's update saddr under the bhash bucket's lock.
Fixes: 3df80d9320 ("[DCCP]: Introduce DCCPv6")
Fixes: 7c657876b6 ("[DCCP]: Initial implementation")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we call inet_bhash2_update_saddr(), prev_saddr is always non-NULL.
Let's remove the unnecessary test.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When connect() is called on a socket bound to the wildcard address,
we change the socket's saddr to a local address. If the socket
fails to connect() to the destination, we have to reset the saddr.
However, when an error occurs after inet_hash6?_connect() in
(dccp|tcp)_v[46]_conect(), we forget to reset saddr and leave
the socket bound to the address.
From the user's point of view, whether saddr is reset or not varies
with errno. Let's fix this inconsistent behaviour.
Note that after this patch, the repro [0] will trigger the WARN_ON()
in inet_csk_get_port() again, but this patch is not buggy and rather
fixes a bug papering over the bhash2's bug for which we need another
fix.
For the record, the repro causes -EADDRNOTAVAIL in inet_hash6_connect()
by this sequence:
s1 = socket()
s1.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
s1.bind(('127.0.0.1', 10000))
s1.sendto(b'hello', MSG_FASTOPEN, (('127.0.0.1', 10000)))
# or s1.connect(('127.0.0.1', 10000))
s2 = socket()
s2.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
s2.bind(('0.0.0.0', 10000))
s2.connect(('127.0.0.1', 10000)) # -EADDRNOTAVAIL
s2.listen(32) # WARN_ON(inet_csk(sk)->icsk_bind2_hash != tb2);
[0]: https://syzkaller.appspot.com/bug?extid=015d756bbd1f8b5c8f09
Fixes: 3df80d9320 ("[DCCP]: Introduce DCCPv6")
Fixes: 7c657876b6 ("[DCCP]: Initial implementation")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nf_flow_table_block_setup and the driver TC_SETUP_FT call can modify the flow
block cb list while they are being traversed elsewhere, causing a crash.
Add a write lock around the calls to protect readers
Fixes: c29f74e0df ("netfilter: nf_flow_table: hardware offload support")
Reported-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The commit 510841da1f ("netfilter: ipset: enforce documented limit to
prevent allocating huge memory") was too strict and prevented to add up to
64 clashing elements to a hash:net,iface type of set. This patch fixes the
issue and now the type behaves as documented.
Fixes: 510841da1f ("netfilter: ipset: enforce documented limit to prevent allocating huge memory")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If PTP synchronisation is done every second, then sporadic the interval
is higher than one second:
ptp4l[696.582]: master offset -17 s2 freq -1891 path delay 573
ptp4l[697.582]: master offset -22 s2 freq -1901 path delay 573
ptp4l[699.368]: master offset -1 s2 freq -1887 path delay 573
^^^^^^^ Should be 698.582!
This problem is caused by rotten packets, which are received after
polling but before interrupts are enabled again. This can be fixed by
checking for pending work and rescheduling if necessary after interrupts
has been enabled again.
Fixes: 403f69bbdb ("tsnep: Add TSN endpoint Ethernet MAC driver")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://lore.kernel.org/r/20221119211825.81805-1-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 4581dd480c ("net: octeontx2-pf: mcs: consider MACSEC setting")
has already added "depends on MACSEC || !MACSEC", so remove it.
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20221119133616.3583538-1-zhengbin13@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). Call pci_dev_put() before returning from
bnx2x_vf_is_pcie_pending() to avoid refcount leak.
Fixes: b56e9670ff ("bnx2x: Prepare device and initialize VF database")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221119070202.1407648-1-yangyingliang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In commit f11fe1dae1 ("net/sched: Make NET_ACT_CT depends on NF_NAT"),
it fixed the build failure when NF_NAT is m and NET_ACT_CT is y by
adding depends on NF_NAT for NET_ACT_CT. However, it would also cause
NET_ACT_CT cannot be built without NF_NAT, which is not expected. This
patch fixes it by changing to use "(!NF_NAT || NF_NAT)" as the depend.
Fixes: f11fe1dae1 ("net/sched: Make NET_ACT_CT depends on NF_NAT")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/b6386f28d1ba34721795fb776a91cbdabb203447.1668807183.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If phylink_of_phy_connect() fails, the port should be disabled.
If sparx5_serdes_set()/phy_power_on() fails, the port should be
disabled and the phylink should be stopped and disconnected.
Fixes: 946e7fd505 ("net: sparx5: add port module support")
Fixes: f3cad2611a ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Tested-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20221117125918.203997-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
acpi_evaluate_dsm() should be coupled with ACPI_FREE() to free the ACPI
memory, because we need to track the allocation of acpi_object when
ACPI_DBG_TRACK_ALLOCATIONS enabled, so use ACPI_FREE() instead of kfree().
Fixes: d38a648d2d ("net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfg")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221118062447.2324881-1-bobo.shaobowang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When IPv6 module initializing in xfrm6_init(), register_pernet_subsys()
is possible to fail but its return value is ignored.
If IPv6 initialization fails later and xfrm6_fini() is called,
removing uninitialized list in xfrm6_net_ops will cause null-ptr-deref:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 330 Comm: insmod
RIP: 0010:unregister_pernet_operations+0xc9/0x450
Call Trace:
<TASK>
unregister_pernet_subsys+0x31/0x3e
xfrm6_fini+0x16/0x30 [ipv6]
ip6_route_init+0xcd/0x128 [ipv6]
inet6_init+0x29c/0x602 [ipv6]
...
Fix it by catching the error return value of register_pernet_subsys().
Fixes: 8d068875ca ("xfrm: make gc_thresh configurable in all namespaces")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Kernel 5.14 added a new "byseq" index to speed
up xfrm_state lookups by sequence number in commit
fe9f1d8779 ("xfrm: add state hashtable keyed by seq")
While the patch was thorough, the function pfkey_send_new_mapping()
in net/af_key.c also modifies x->km.seq and never added
the current xfrm_state to the "byseq" index.
This leads to the following kernel Ooops:
BUG: kernel NULL pointer dereference, address: 0000000000000000
..
RIP: 0010:__xfrm_state_delete+0xc9/0x1c0
..
Call Trace:
<TASK>
xfrm_state_delete+0x1e/0x40
xfrm_del_sa+0xb0/0x110 [xfrm_user]
xfrm_user_rcv_msg+0x12d/0x270 [xfrm_user]
? remove_entity_load_avg+0x8a/0xa0
? copy_to_user_state_extra+0x580/0x580 [xfrm_user]
netlink_rcv_skb+0x51/0x100
xfrm_netlink_rcv+0x30/0x50 [xfrm_user]
netlink_unicast+0x1a6/0x270
netlink_sendmsg+0x22a/0x480
__sys_sendto+0x1a6/0x1c0
? __audit_syscall_entry+0xd8/0x130
? __audit_syscall_exit+0x249/0x2b0
__x64_sys_sendto+0x23/0x30
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x61/0xcb
Exact location of the crash in __xfrm_state_delete():
if (x->km.seq)
hlist_del_rcu(&x->byseq);
The hlist_node "byseq" was never populated.
The bug only triggers if a new NAT traversal mapping (changed IP or port)
is detected in esp_input_done2() / esp6_input_done2(), which in turn
indirectly calls pfkey_send_new_mapping() *if* the kernel is compiled
with CONFIG_NET_KEY and "af_key" is active.
The PF_KEYv2 message SADB_X_NAT_T_NEW_MAPPING is not part of RFC 2367.
Various implementations have been examined how they handle
the "sadb_msg_seq" header field:
- racoon (Android): does not process SADB_X_NAT_T_NEW_MAPPING
- strongswan: does not care about sadb_msg_seq
- openswan: does not care about sadb_msg_seq
There is no standard how PF_KEYv2 sadb_msg_seq should be populated
for SADB_X_NAT_T_NEW_MAPPING and it's not used in popular
implementations either. Herbert Xu suggested we should just
use the current km.seq value as is. This fixes the root cause
of the oops since we no longer modify km.seq itself.
The update of "km.seq" looks like a copy'n'paste error
from pfkey_send_acquire(). SADB_ACQUIRE must indeed assign a unique km.seq
number according to RFC 2367. It has been verified that code paths
involving pfkey_send_acquire() don't cause the same Oops.
PF_KEYv2 SADB_X_NAT_T_NEW_MAPPING support was originally added here:
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
commit cbc3488685b20e7b2a98ad387a1a816aada569d8
Author: Derek Atkins <derek@ihtfp.com>
AuthorDate: Wed Apr 2 13:21:02 2003 -0800
[IPSEC]: Implement UDP Encapsulation framework.
In particular, implement ESPinUDP encapsulation for IPsec
Nat Traversal.
A note on triggering the bug: I was not able to trigger it using VMs.
There is one VPN using a high latency link on our production VPN server
that triggered it like once a day though.
Link: https://github.com/strongswan/strongswan/issues/992
Link: https://lore.kernel.org/netdev/00959f33ee52c4b3b0084d42c430418e502db554.1652340703.git.antony.antony@secunet.com/T/
Link: https://lore.kernel.org/netdev/20221027142455.3975224-1-chenzhihao@meizu.com/T/
Fixes: fe9f1d8779 ("xfrm: add state hashtable keyed by seq")
Reported-by: Roth Mark <rothm@mail.com>
Reported-by: Zhihao Chen <chenzhihao@meizu.com>
Tested-by: Roth Mark <rothm@mail.com>
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Acked-by: Antony Antony <antony.antony@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Commit 1229b33973 ("ice: Add low latency Tx timestamp read") refactored
PTP timestamping logic to use a threaded IRQ instead of a separate kthread.
This implementation introduced ice_misc_intr_thread_fn and redefined the
ice_ptp_process_ts function interface to return a value of whether or not
the timestamp processing was complete.
ice_misc_intr_thread_fn would take the return value from ice_ptp_process_ts
and convert it into either IRQ_HANDLED if there were no more timestamps to
be processed, or IRQ_WAKE_THREAD if the thread should continue processing.
This is not correct, as the kernel does not re-schedule threaded IRQ
functions automatically. IRQ_WAKE_THREAD can only be used by the main IRQ
function.
This results in the ice_ptp_process_ts function (and in turn the
ice_ptp_tx_tstamp function) from only being called exactly once per
interrupt.
If an application sends a burst of Tx timestamps without waiting for a
response, the interrupt will trigger for the first timestamp. However,
later timestamps may not have arrived yet. This can result in dropped or
discarded timestamps. Worse, on E822 hardware this results in the interrupt
logic getting stuck such that no future interrupts will be triggered. The
result is complete loss of Tx timestamp functionality.
Fix this by modifying the ice_misc_intr_thread_fn to perform its own
polling of the ice_ptp_process_ts function. We sleep for a few microseconds
between attempts to avoid wasting significant CPU time. The value was
chosen to allow time for the Tx timestamps to complete without wasting so
much time that we overrun application wait budgets in the worst case.
The ice_ptp_process_ts function also currently returns false in the event
that the Tx tracker is not initialized. This would result in the threaded
IRQ handler never exiting if it gets started while the tracker is not
initialized.
Fix the function to appropriately return true when the tracker is not
initialized.
Note that this will not reproduce with default ptp4l behavior, as the
program always synchronously waits for a timestamp response before sending
another timestamp request.
Reported-by: Siddaraju DH <siddaraju.dh@intel.com>
Fixes: 1229b33973 ("ice: Add low latency Tx timestamp read")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20221118222729.1565317-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
