The perf python extention (perf.so) file lacks its dependencies in the
Makefile so that it cannot be refreshed if one of source files it depends
is changed. Fix it by putting them in a separate file and processing it in
both of Makefile and setup.py.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1329043524-12470-1-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A recent refactoring of perf-record introduced the following:
perf record -a -B
Couldn't generating buildids. Use --no-buildid to profile anyway.
sleep: Terminated
I believe the triple negative was meant to be only a double negative.
:-) While I'm there, fixed the grammar on the error message.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1328567272-13190-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current version of perf detects whether or not the perf.data file is
written in a different endianness using the attr_size field in the
header of the file. This field represents sizeof(struct perf_event_attr)
as known to perf record. If the sizes do not match, then perf tries the
byte-swapped version. If they match, then the tool assumes a different
endianness.
The issue with the approach is that it assumes the size of
perf_event_attr always has to match between perf record and perf report.
However, the kernel perf_event ABI is extensible. New fields can be
added to struct perf_event_attr. Consequently, it is not possible to use
attr_size to detect endianness.
This patch takes another approach by using the magic number written at
the beginning of the perf.data file to detect endianness. The magic
number is an eight-byte signature. It's primary purpose is to identify
(signature) a perf.data file. But it could also be used to encode the
endianness.
The patch introduces a new value for this signature. The key difference
is that the signature is written differently in the file depending on
the endianness. Thus, by comparing the signature from the file with the
tool's own signature it is possible to detect endianness. The new
signature is "PERFILE2".
Backward compatiblity with existing perf.data file is ensured.
Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roberto Agostino Vitillo <ravitillo@lbl.gov>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Vince Weaver <vweaver1@eecs.utk.edu>
Link: http://lkml.kernel.org/r/1328187288-24395-15-git-send-email-eranian@google.com
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The default 'M/sec' unit is not useful if the result is small enough.
Adjust it dynamically according to the value.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328514285-26232-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we can put the object files in a different directory by using
'O=' comand line argument.
However the generated documentation files don't honor this directive,
This patch fixes that. It's been tested for man target but the others
seems currently broken so no tests have been done on them so far.
Link: http://lkml.kernel.org/r/1328541443-18003-1-git-send-email-fbuihuu@gmail.com
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By adding following objects:
bench/mem-memset-x86-64-asm.o
bench/mem-memcpy-x86-64-asm.o
the x86_64 perf binary ended up with executable stack.
The reason was that above objects are assembler sourced and are missing the
GNU-stack note section. In such case the linker assumes that the final binary
should not be restricted at all and mark the stack as RWX.
Adding section ".note.GNU-stack" definition to mentioned objects, with all
flags disabled, thus omiting those objects from linker stack flags decision.
Reported-at: https://bugzilla.redhat.com/show_bug.cgi?id=783570
Reported-by: Clark Williams <williams@redhat.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328100848-5630-1-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
[ committer note: Remaining bits after what was already added to perf/urgent ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can get the perf bench exec stack fixes and then apply the
remaining fix for the files added after what is in perf/urgent.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes an issue where perf report shows nan% for certain
perf.data files. The below is from a report for a do_fork probe:
-nan% sshd [kernel.kallsyms] [k] do_fork
-nan% packagekitd [kernel.kallsyms] [k] do_fork
-nan% dbus-daemon [kernel.kallsyms] [k] do_fork
-nan% bash [kernel.kallsyms] [k] do_fork
A git bisect shows commit f3bda2c as the cause. However, looking back
through the git history, I saw commit 640c03c which seems to have
removed the required initialization for perf_sample->period. The problem
only started showing after commit f3bda2c. The below patch re-introduces
the initialization and it fixes the problem for me.
With the below patch, for the same perf.data:
73.08% bash [kernel.kallsyms] [k] do_fork
8.97% 11-dhclient [kernel.kallsyms] [k] do_fork
6.41% sshd [kernel.kallsyms] [k] do_fork
3.85% 20-chrony [kernel.kallsyms] [k] do_fork
2.56% sendmail [kernel.kallsyms] [k] do_fork
This patch applies over current linux-tip commit 9949284.
Problem introduced in:
$ git describe 640c03c
v2.6.37-rc3-83-g640c03c
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/20120203170113.5190.25558.stgit@localhost6.localdomain6
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some perf ancient versions we used '[kernel.kallsyms._text]' as the
name for the kernel map.
This got changed with commit:
perf: 'perf kvm' tool for monitoring guest performance from host
commit a1645ce12a
Author: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
and we started to use following name '[kernel.kallsyms]_text'.
This name change is important for the report code dealing with ancient
perf data. When processing the kernel map event, we need to recognize
the old naming (dont match the last ']') and initialize the kernel map
correctly.
The subsequent call to maps__set_kallsyms_ref_reloc_sym deals with the
superfluous ']' to get correct symbol name.
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328461865-6127-1-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By adding following objects:
bench/mem-memcpy-x86-64-asm.o
the x86_64 perf binary ended up with executable stack.
The reason was that above object are assembler sourced and is missing the
GNU-stack note section. In such case the linker assumes that the final binary
should not be restricted at all and mark the stack as RWX.
Adding section ".note.GNU-stack" definition to mentioned object, with all
flags disabled, thus omiting this object from linker stack flags decision.
Problem introduced in:
$ git describe ea7872b
v2.6.37-rc2-19-gea7872b
Reported-at: https://bugzilla.redhat.com/show_bug.cgi?id=783570
Reported-by: Clark Williams <williams@redhat.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1328100848-5630-1-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
[ committer note: Backported fix to perf/urgent (3.3-rc2+) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Loop over all features to enable it instead of explicitly enabling every
single feature. Reducing duplicate code and making it more robust to
later changes e.g. when adding more features.
Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/1323966762-8574-3-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a precursor patch that modifies names that refer to
kernel/module to also refer to user space names.
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120202142040.5967.64156.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
distclean as an alias for clean was removed from the perf Makefile by
commit a3d1ee10d1
However, that commit neglected to remove it from the help output of
the perf Makefile, which could result in a user trying the following.
$ cd tools/perf/
$ make help | grep distclean
distclean - alias to clean
$ make distclean
make: *** No rule to make target `distclean'. Stop.
This patch removes it from the Makefile help output.
Link: http://lkml.kernel.org/r/1328134591-19851-1-git-send-email-jkacur@redhat.com
Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Making perf_evlist__splice_list_tail globaly accessible.
It is used in the upcomming paches.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1327674868-10486-2-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In recent versions of perf top, pressing the 'e' key to change the
number of displayed samples had no effect.
The number of samples was still dictated by the size of the terminal
(stdio mode). That was quite annoying because typically only the first
dozen samples really matter.
This patch fixes this.
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120130105037.GA5160@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The event_type record has a max length for the event name.
It's called MAX_EVENT_NAME.
The name may be truncated to fit the max length. But the header.size still
reflects the original name length. If that length is > MAX_EVENT_NAME, then the
header.size field is bogus. Fix this by using the length of the name after the
potential truncation.
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120120094912.GA4882@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building on my Debian/mips system, util/util.c fails to build
because commit 1aed267173 (perf kvm: Do
guest-only counting by default) indirectly includes stdio.h before the
feature selection in util.h is done. This prevents _GNU_SOURCE in
util.h from enabling the declaration of getline(), from now second
inclusion of stdio.h, and the build is broken.
There is another breakage in util/evsel.c caused by include ordering,
but I didn't fully track down the commit that caused it.
The root cause of all this is an inconsistent definition of _GNU_SOURCE,
so I move the definition into the Makefile so that it is passed to all
invocations of the compiler and used uniformly for all system header
files. All other #define and #undef of _GNU_SOURCE are removed as they
cause conflicts with the definition passed to the compiler.
All the features.h definitions (_LARGEFILE64_SOURCE _FILE_OFFSET_BITS=64
and _GNU_SOURCE) are needed by the python glue code too, so they are
moved to BASIC_CFLAGS, and the misleading comments about BASIC_CFLAGS
are removed.
This gives me a clean build on x86_64 (fc12) and mips (Debian).
Cc: David Daney <david.daney@cavium.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1326836461-11952-1-git-send-email-ddaney.cavm@gmail.com
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We want to be woken up for every PERF_RECORD_ event, attr.wakeup_events
is only for PERF_RECORD_SAMPLE, so also use attr.watermark = 1 to fix
that.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-v3lnpwgrr8mllcr3ntduuqvc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are unnecessary #include <ctype.h> out there, and they might cause
a nasty build failure in some environment. As we already have most of
ctype macros in util.h, just get rid of them.
A few of exceptions are util/symbol.c which needs isupper() macro util.h
doesn't provide and perl scripting support code which includes ctype.h
internally.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1327827356-8786-4-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 26242d859c ("perf lock: Add "info" subcommand for dumping
misc information") added the subcommand but missed documentation. Add
it. Also update stale 'trace' subcommand to 'script'.
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1327827356-8786-5-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In recent versions of perf top, pressing the 'e' key to change the
number of displayed samples had no effect.
The number of samples was still dictated by the size of the terminal
(stdio mode). That was quite annoying because typically only the first
dozen samples really matter.
This patch fixes this.
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120130105037.GA5160@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the option get the path of [kernel.kallsyms].
Specify '--show-kernel-path' option to use this function.
This patch enables other applications to use this output easily.
Without --show-kernel-path option
ffffffff81467612 irq_return ([kernel.kallsyms])
ffffffff81467612 irq_return ([kernel.kallsyms])
7f24fc02a6b3 _start (/lib64/ld-2.14.so)
[snip]
With --show-kernel-path option
ffffffff81467612 irq_return (/lib/modules/3.2.0+/build/vmlinux)
ffffffff81467612 irq_return (/lib/modules/3.2.0+/build/vmlinux)
7f24fc02a6b3 _start (/lib64/ld-2.14.so)
[snip]
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20120130044320.2384.73322.stgit@linux3
Signed-off-by: Akihiro Nagai <akihiro.nagai.hw@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf script command uses various expressions to indicate "unknown".
It is unfriendly for user scripts to parse it. So, this patch unifies
the expressions to "[unknown]".
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20120130044257.2384.62905.stgit@linux3
Signed-off-by: Akihiro Nagai <akihiro.nagai.hw@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The event_type record has a max length for the event name.
It's called MAX_EVENT_NAME.
The name may be truncated to fit the max length. But the header.size still
reflects the original name length. If that length is > MAX_EVENT_NAME, then the
header.size field is bogus. Fix this by using the length of the name after the
potential truncation.
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120120094912.GA4882@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo pointed out few perf probe usability related errors during his
review of uprobes.
Since these issues are independent of uprobes, fixing them in a separate
patch.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20120120121354.GL15447@linux.vnet.ibm.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building on my Debian/mips system, util/util.c fails to build
because commit 1aed267173 (perf kvm: Do
guest-only counting by default) indirectly includes stdio.h before the
feature selection in util.h is done. This prevents _GNU_SOURCE in
util.h from enabling the declaration of getline(), from now second
inclusion of stdio.h, and the build is broken.
There is another breakage in util/evsel.c caused by include ordering,
but I didn't fully track down the commit that caused it.
The root cause of all this is an inconsistent definition of _GNU_SOURCE,
so I move the definition into the Makefile so that it is passed to all
invocations of the compiler and used uniformly for all system header
files. All other #define and #undef of _GNU_SOURCE are removed as they
cause conflicts with the definition passed to the compiler.
All the features.h definitions (_LARGEFILE64_SOURCE _FILE_OFFSET_BITS=64
and _GNU_SOURCE) are needed by the python glue code too, so they are
moved to BASIC_CFLAGS, and the misleading comments about BASIC_CFLAGS
are removed.
This gives me a clean build on x86_64 (fc12) and mips (Debian).
Cc: David Daney <david.daney@cavium.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1326836461-11952-1-git-send-email-ddaney.cavm@gmail.com
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
"perf stat ... perf bench mem mem..." is pretty meaningless when using
small block sizes (as the overhead of the invocation of each test run
basically hides the actual test result in the noise). Repeating the
actually interesting function's invocation a number of times allows the
results to become meaningful.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4F16D767020000780006D738@nat28.tlf.novell.com
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intended to be able to support the current selection of the preferred
memcpy() implementation, this patch adds the ability to also measure the
two alternative implementations, again by way of using some
pre-processsor replacement.
While on my Westmere system this proves that the movsb based variant is
worse than the movsq based one (since the ERMS feature isn't there), it
also shows that here for the default as well as small sizes the unrolled
variant outperforms the movsq one.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4F16D728020000780006D732@nat28.tlf.novell.com
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since arch/x86/lib/memcpy_64.S implements not only __memcpy, but also
memcpy, without further precautions this function will get chose by the
static linker for resolving all references, and hence the "default"
measurement didn't really measure anything else than the
"x86-64-unrolled" one.
Fix this by renaming (through the pre-processor) the conflicting symbol.
On my Westmere system, the glibc variant turns out to require about 4%
less instructions, but 15% more cycles for the default 1Mb block size
measured.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4F16D6FD020000780006D72F@nat28.tlf.novell.com
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new --uid command line option will show only the tasks for a given
user, using the proc interface to figure out the existing tasks.
Kernel work is needed to close races at startup, but this should already
be useful in many use cases.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bdnspm000gw2l984a2t53o8z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
perf tools: Fix compile error on x86_64 Ubuntu
perf report: Fix --stdio output alignment when --showcpuutilization used
perf annotate: Get rid of field_sep check
perf annotate: Fix usage string
perf kmem: Fix a memory leak
perf kmem: Add missing closedir() calls
perf top: Add error message for EMFILE
perf test: Change type of '-v' option to INCR
perf script: Add missing closedir() calls
tracing: Fix compile error when static ftrace is enabled
recordmcount: Fix handling of elf64 big-endian objects.
perf tools: Add const.h to MANIFEST to make perf-tar-src-pkg work again
perf tools: Add support for guest/host-only profiling
perf kvm: Do guest-only counting by default
perf top: Don't update total_period on process_sample
perf hists: Stop using 'self' for struct hist_entry
perf hists: Rename total_session to total_period
x86: Add counter when debug stack is used with interrupts enabled
x86: Allow NMIs to hit breakpoints in i386
x86: Keep current stack in NMI breakpoints
...
The ctype.h include is not needed here and it breaks build on some systems (at
least 64bit Ubuntu 10.04) like below. Just get rid of it.
CC util/trace-event-info.o
cc1: warnings being treated as errors
util/trace-event-info.c: In function ‘record_file’:
util/trace-event-info.c:192: error: implicit declaration of function ‘pwrite’
util/trace-event-info.c:192: error: nested extern declaration of ‘pwrite’
make: *** [util/trace-event-info.o] Error 1
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1326035430-7621-1-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'field_sep' variable is not set anywhere. Just remove the
conditional.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325957132-10600-7-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The annotate command doesn't take non-option arguments.
In fact, it can take last argument as a symbol filter though, but that's
a special case and, IMHO, it should be discouraged in favor of the -s
option.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325957132-10600-6-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'str' should be freed when sort_dimension__add() failed too.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325957132-10600-5-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a user tries to open so many events, perf_event_open syscall may
fail with EMFILE. Provide advise for that case.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325957132-10600-3-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The '-v' option is usually defined via OPT_INCR not _INTEGER. Follow
the trend :).
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325957132-10600-2-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (185 commits)
powerpc: fix compile error with 85xx/p1010rdb.c
powerpc: fix compile error with 85xx/p1023_rds.c
powerpc/fsl: add MSI support for the Freescale hypervisor
arch/powerpc/sysdev/fsl_rmu.c: introduce missing kfree
powerpc/fsl: Add support for Integrated Flash Controller
powerpc/fsl: update compatiable on fsl 16550 uart nodes
powerpc/85xx: fix PCI and localbus properties in p1022ds.dts
powerpc/85xx: re-enable ePAPR byte channel driver in corenet32_smp_defconfig
powerpc/fsl: Update defconfigs to enable some standard FSL HW features
powerpc: Add TBI PHY node to first MDIO bus
sbc834x: put full compat string in board match check
powerpc/fsl-pci: Allow 64-bit PCIe devices to DMA to any memory address
powerpc: Fix unpaired probe_hcall_entry and probe_hcall_exit
offb: Fix setting of the pseudo-palette for >8bpp
offb: Add palette hack for qemu "standard vga" framebuffer
offb: Fix bug in calculating requested vram size
powerpc/boot: Change the WARN to INFO for boot wrapper overlap message
powerpc/44x: Fix build error on currituck platform
powerpc/boot: Change the load address for the wrapper to fit the kernel
powerpc/44x: Enable CRASH_DUMP for 440x
...
Fix up a trivial conflict in arch/powerpc/include/asm/cputime.h due to
the additional sparse-checking code for cputime_t.
Fixes:
|make: *** No rule to make target `../../include/linux/const.h', needed by `builtin-annotate.o'. Stop.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1324128938-17553-1-git-send-email-sebastian@breakpoint.cc
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To restrict a counter to either host or guest mode this patch introduces
two new event modifiers: G and H.
With G the counter is configured in guest-only mode and with H in
host-only mode.
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Link: http://lkml.kernel.org/n/tip-or5aj3rghy9ngyg882z6kln9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make use of exclude_guest and exlude_host in perf-kvm to do only
guest-only counting by default.
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
[ committer note: Moved perf_{guest,host} & event_attr_init to util.c ]
[ so as not to drag more stuff to the python binding]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will be recalculated at __hists__output_resort, to take into account
filters possibly applied by the TUI, etc.
Since we do the percent math only for those entries that will appear on
the TUI instead of for _all_ the entries at decay time, updating it for
each sample makes the entries seem to decay faster when using the
navigation keys (since the screen will be refreshed), as we're not
coalescing the entries that are being batched to be merged at next
resort/decay time, but considering their periods.
Bug introduced in 743eb86.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-k0d0rq9a8nqtkqohov8cir72@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stop using this python/OOP convention, doesn't really helps. Will do
more from time to time till we get it cleaned up in all of /perf.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-me4dyj6s5snh7jr8wb9gzt82@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Nowadays we do it per evsel, not per session (that may have multiple
evsels), so rename it to avoid confusion.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-azsgomr5h4dmaudoogw48w49@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As script_spec__delete() frees given struct script_spec it should not be
called if we failed to allocate the struct. Also it's the only caller of
the function, we can get rid of the function itself.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325000151-4463-4-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'buf' should be freed when symbol wasn't found too.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325000151-4463-3-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The get_ratio_color() returns appropriate color string based on @ratio.
It helps reducing code duplication.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325000151-4463-2-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'size' cannot be 0 because it was set to 8 on the above line in case
it was 0 and never changed.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325000151-4463-1-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current perf scripting facility only supports tracepoints. This
patch implements a generic perl handler to support other events than
tracepoints too.
This patch introduces a function process_event() that is called by perf
for each sample. The function is called with byte streams as arguments
containing information about the event, its attributes, the sample and
raw data. Perl's unpack() function can easily be used for byte decoding.
The following is the default implementation for process_event() that can
also be generated with perf script:
# Packed byte string args of process_event():
#
# $event: union perf_event util/event.h
# $attr: struct perf_event_attr linux/perf_event.h
# $sample: struct perf_sample util/event.h
# $raw_data: perf_sample->raw_data util/event.h
sub process_event
{
my ($event, $attr, $sample, $raw_data) = @_;
my @event = unpack("LSS", $event);
my @attr = unpack("LLQQQQQLLQQ", $attr);
my @sample = unpack("QLLQQQQQLL", $sample);
my @raw_data = unpack("C*", $raw_data);
use Data::Dumper;
print Dumper \@event, \@attr, \@sample, \@raw_data;
}
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323969824-9711-4-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces the for_each_set_bit() macro and modifies feature
implementation to use it.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-8-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The features HEADER_TRACE_INFO and HEADER_BUILD_ID are handled
different when writing the feature section. All other features are
simply disabled on failure and writing the section goes on without
returning an error. There is no reason for these special cases. This
patch unifies handling of the features.
This should be ok since all features can be parsed independently.
Offset and size of a feature's block is stored in struct perf_file_
section right after the data block of perf.data (see perf_session__
write_header()). Thus, if a feature does not exist then other features
can be processed anyway.
Also moving special code for HEADER_BUILD_ID out to write_build_id().
v2:
* perf record throws an error now if buildids may not be generated,
which can be disabled with the --no-buildid option.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-6-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The default input file for perf report is not handled the same way as
perf record does it for its output file. This leads to unexpected
behavior of perf report, etc. E.g.:
# perf record -a -e cpu-cycles sleep 2 | perf report | cat
failed to open perf.data: No such file or directory (try 'perf record' first)
While perf record writes to a fifo, perf report expects perf.data to be
read. This patch changes this to accept fifos as input file.
Applies to the following commands:
perf annotate
perf buildid-list
perf evlist
perf kmem
perf lock
perf report
perf sched
perf script
perf timechart
Also fixes char const* -> const char* type declaration for filename
strings.
v2:
* Prevent potential null pointer access to input_name in
builtin-report.c. Needed due to removal of patch "perf report: Setup
browser if stdout is a pipe"
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-5-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If filename is NULL there is an out-of-bound access to struct
perf_session if it would be used with perf_session__open(). Shouldn't
actually happen in current implementation as filename is always !NULL.
Fixing this by always null-terminating filename.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-3-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A feature may be unknown if perf.data is created and parsed on different
perf tool versions. This should not stop the header to be processed,
instead continue processing it.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-2-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reducing duplication and line size by extending function names for
print and write from a single name.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-7-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we automatically point users at it, let's provide them some
guidance so that they hopefully don't just get mysterious EINVAL's
from the kernel.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1324301972-22740-4-git-send-email-nelhage@nelhage.com
Signed-off-by: Nelson Elhage <nelhage@nelhage.com>
[ committer note: Made it work after 50a682c ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This failure is most likely due to running up against the
kernel.perf_event_mlock_kb sysctl, so we can tell the user what to do to
fix the issue.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1324301972-22740-3-git-send-email-nelhage@nelhage.com
Signed-off-by: Nelson Elhage <nelhage@nelhage.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I get such truncated annotation results in 'perf top':
: Disassembly of section .text: ▒
: ▒
: ffffffff810966a8 <nr_iowait_cpu>: ▒
4.94 : ffffffff810966a8: movslq %edi,%rdi ▒
3.70 : ffffffff810966ab: mov $0x13700,%rax ▒
0.00 : ffffffff810966b2: add -0x7e32cb00(,%rdi,8),%rax ▒
8.64 : ffffffff810966ba: mov 0x7e0(%rax),%eax ▒
82.72 : ffffffff810966c0: cltq ▒
Note the missing 'retq' which is there in the original function:
ffffffff810966a8 <nr_iowait_cpu>:
ffffffff810966a8: 48 63 ff movslq %edi,%rdi
ffffffff810966ab: 48 c7 c0 00 37 01 00 mov $0x13700,%rax
ffffffff810966b2: 48 03 04 fd 00 35 cd add -0x7e32cb00(,%rdi,8),%rax
ffffffff810966b9: 81
ffffffff810966ba: 8b 80 e0 07 00 00 mov 0x7e0(%rax),%eax
ffffffff810966c0: 48 98 cltq
ffffffff810966c2: c3 retq
ffffffff810966c3 <this_cpu_load>:
I'm using a fairly recent binutils:
GNU objdump version 2.21.51.0.6-2.fc16 20110118
AFAICS the bug is simply that sym->end points to the last byte
of the symbol in question - while objdump's --stop-address
expects the last byte plus 1 to disassemble the full range.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111223130804.GA24305@elte.hu
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This handles multithreaded processes with named threads when doing
system wide profiling: the comm for each thread is looked up allowing
them to be different from the thread group leader.
v2:
- fixed sizeof arg to perf_event__get_comm_tgid
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1324578603-12762-3-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf does not properly handle monitoring of processes with named threads.
For example:
$ ps -C myapp -L
PID LWP TTY TIME CMD
25118 25118 ? 00:00:00 myapp
25118 25119 ? 00:00:00 myapp:worker
perf record -e cs -c 1 -fo /tmp/perf.data -p 25118 -- sleep 10
perf report --stdio -i /tmp/perf.data
100.00% myapp:worker [kernel.kallsyms] [k] perf_event_task_sched_out
The process name is set to the name of the last thread it finds for the
process.
The Problem:
perf-top and perf-record both create a thread_map of threads to be
monitored. That map is used in perf_event__synthesize_thread_map which
loops over the entries in thread_map and calls __event__synthesize_thread
to generate COMM and MMAP events.
__event__synthesize_thread calls perf_event__synthesize_comm which opens
/proc/pid/status, reads the name of the task and its thread group id.
That's all fine. The problem is that it then reads /proc/pid/task and
generates COMM events for each task it finds - but using the name found
in /proc/pid/status where pid is the thread of interest.
The end result (looping over thread_map + synthesizing comm events for
each thread each time) means the name of the last thread processed sets
the name for all threads in the process - which is not good for
multithreaded processes with named threads.
The Fix:
perf_event__synthesize_comm has an input argument (full) that decides
whether to process task entries for each pid it is passed. It currently
never set to 0 (perf_event__synthesize_comm has a single caller and it
always passes the value 1). Let's fix that.
Add the full input argument to __event__synthesize_thread which passes
it to perf_event__synthesize_comm. For thread/process monitoring set full
to 0 which means COMM and MMAP events are only generated for the pid
passed to it. For system wide monitoring set full to 1 so that COMM events
are generated for all threads in a process.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1324578603-12762-2-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf report does not take a command from command line.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323703017-6060-8-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement a simple test for the self-monitoring data from the
perf mmap data area control page:
6: x86 rdpmc test:
0: 6053
1: 60053
2: 600059
3: 6000059
4: 60000075
5: 600000247
Ok
The counts are expected to increase monotonically - these
are recovered via RDPMC, without calling into the kernel.
It might be nice to add logic to automagically turn these numbers into OK/FAIL.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Arun Sharma <asharma@fb.com>
Link: http://lkml.kernel.org/n/tip-evf5yii88ljdgmaihccbxxw1@git.kernel.org
[ various small improvements ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add new generic hw event: ref-cycles, which maps to
PERF_HW_COUNT_REF_CPUCYCLES:
$ perf stat -e ref-cycles ls
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323559734-3488-5-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adding automated tests for event parsing to include testing for modifier
and ',' operator.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: cjashfor@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1323963039-7602-4-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
[ committer note: Remove some tests that need group_leader & bison patchkits ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use local variable 'dso' to reduce typing a bit and rearrange the if
condition. Also NULL check of al->map in the condition is not necessary.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323703017-6060-7-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These files are part of PERF not GIT although they're come from there :)
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323784323-2150-1-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After freeing each elements of the @values->value, we should free itself
too.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323703017-6060-5-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The order of freeing comm_list and dso_list should be reversed.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323703017-6060-4-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'path' variable is set on a upper line, don't need to do it again.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323703017-6060-3-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On failure, perf_evlist__mmap_per_{cpu,thread} will try to munmap()
every map that doesn't have a NULL base. This will fail with EINVAL if
one of them has base == MAP_FAILED, clobbering errno, so that
perf_evlist__map will return EINVAL on any failure regardless of the
root cause.
Fix this by resetting failed maps to a NULL base.
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1324301972-22740-2-git-send-email-nelhage@nelhage.com
Signed-off-by: Nelson Elhage <nelhage@nelhage.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The '--call-graph' command line option can receive undocumented optional
print_limit argument. Besides, use strtoul() to parse the option since
its type is u32.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323703017-6060-2-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Memory in struct perf_sample is not fully initialized during parsing.
Depending on sampling data some parts may left unchanged. Zero out
struct perf_sample first to avoid access to uninitialized memory.
Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/1323966762-8574-2-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The problem is that when SAMPLE_PERIOD is not set, the kernel generates
a number of samples in proportion to an event's period. Number of these
samples may be too big and the kernel throttles all samples above a
defined limit.
E.g.: I want to trace when a process sleeps. I created a process which
sleeps for 1ms and for 4ms. perf got 100 events in both cases.
swapper 0 [000] 1141.371830: sched_stat_sleep: comm=foo pid=1801 delay=1386750 [ns]
swapper 0 [000] 1141.369444: sched_stat_sleep: comm=foo pid=1801 delay=4499585 [ns]
In the first case a kernel want to send 4499585 events and in the second
case it wants to send 1386750 events. perf-reports shows that process
sleeps in both places equal time.
Instead of this we can get only one sample with an attribute period. As
result we have less data transferring between kernel and user-space and
we avoid throttling of samples.
The patch "events: Don't divide events if it has field period" added a
kernel part of this functionality.
Acked-by: Arun Sharma <asharma@fb.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: devel@openvz.org
Link: http://lkml.kernel.org/r/1324391565-1369947-1-git-send-email-avagin@openvz.org
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's the counterpart of perf_session__parse_sample.
v2: fixed mistakes found by David Ahern.
v3: s/data/sample/
s/perf_event__change_sample/perf_event__synthesize_sample
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: devel@openvz.org
Link: http://lkml.kernel.org/r/1323266161-394927-3-git-send-email-avagin@openvz.org
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The option is documented in man perf-script but was not yet implemented:
-a
Force system-wide collection. Scripts run without a
<command> normally use -a by default, while scripts run
with a <command> normally don't - this option allows the
latter to be run in system-wide mode.
As with perf record you now can profile in system-wide mode for the
runtime of a given command, e.g.:
# perf script -a syscall-counts sleep 2
Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/1322229925-10075-1-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix mem leaks and missing NULL pointer checks after strdup().
And get_script_path() did not free __script_root in case of continue.
Introduce a helper function get_script_root().
Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/1322217520-3287-1-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evsel.name may be not initialized
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arun Sharma <asharma@fb.com>
Cc: devel@openvz.org
Link: http://lkml.kernel.org/r/1322471015-107825-2-git-send-email-avagin@openvz.org
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A update is made to the sched:sched_switch event that adds some
logic to the first parameter of the __print_flags() that shows the
state of tasks. This change cause perf to fail parsing the flags.
A simple fix is needed to have the parser be able to process ops
within the argument.
Cc: stable@vger.kernel.org
Reported-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
perf stat is failing on PowerPC:
Error: open_counter returned with 95 (Operation not supported). /bin/dmesg may provide additional information.
Fatal: Not all events could be opened.
commit 370faf1dd0 (perf stat: Fail softly on unsupported events)
added a check for failure returning ENOENT, but the POWER backend
returns EOPNOTSUPP. It looks like alpha, blackfin and mips do the
same.
With the patch applied, things work as expected:
Performance counter stats for '/bin/true':
0.362176 task-clock # 0.623 CPUs utilized
0 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
28 page-faults # 0.077 M/sec
1,677,020 cycles # 4.630 GHz
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
431,220 instructions # 0.26 insns per cycle
101,889 branches # 281.325 M/sec
4,145 branch-misses # 4.07% of all branches
0.000581361 seconds time elapsed
Cc: <stable@kernel.org> # 3.0+
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111202093833.5fef7226@kryten
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For errors that don't preclude checking for further errors, aka "soft"
errors, just continue testing for other errors.
Better coverage in verbose mode.
Suggested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jafcokbj26m845dsgm2hx6az@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
