Just to be more consistent with the order of args that DRM helpers like
drm_atomic_get_new_crtc_state() use.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
I have a strange dejavu feeling that I tried to submit a patch for this in
the past, but that it was rejected. I can't remember though, but I'm
further convinced this patch is the right thing to do anyway.
We label the to-be-committed head state in nv50_msto_atomic_enable() as
armh. Normally armh implies a state which is currently armed in hardware.
nv50_msto_atomic_enable() is called _after_ drm_atomic_swap_state()
however, but before the commit tail ends, which means that said state is
not actually armed on hardware.
As well - take note that this is the same convention followed in all of the
other atomic_enable() callbacks.
So, let's correct this to asyh.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
No functional changes, just change the function names to match the
callbacks they provide.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Noticed these in both the disable (which we'll be getting rid of in a
moment) and the atomic disable callbacks: both callback types check whether
or not there's actually a CRTC assigned to the given encoder. However, as
->atomic_disable and ->disable will never be called without a CRTC assigned
to the given encoder there's no point in this check. So just remove it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Previous hardware allowed a MMU fault to be generated by software to
trigger a context switch for engine recovery. Turing has the capability
to preempt all work from a specific runlist processor and removed the
registers currently used for triggering MMU faults. Attempting to access
these non-existent registers results in further errors, so use the
runlist preemption register instead.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Some of the low level FIFO interrupt status bits have changed for
Turing. Update the handling of these to match the hardware.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Turing requires some changes to FIFO interrupt handling due to changes
in HW register layout. It also requires some changes to implement robust
channel (RC) recovery. This preparatory patch moves the functions
requiring changes into nvkm/engine/fifo/tu102.c so they can be altered
without affecting gk104 and other users. It should not introduce any
functional changes.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is no longer needed now that tu102_mc_intr_stat has been updated to
look at the correct top-level interrupt bits.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Turing reports MMU fault interrupts via new top level interrupt
registers. The old PMC MMU interrupt vector is not used by the HW. This
means we can remap the new top-level MMU interrupt to the exisiting PMC
MMU bit which simplifies the implementation until all interrupts are
moved over to using the new top level registers.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since I'm almost certain I didn't get capability checking right for
pre-volta chipsets, let's start logging any caps we find to make things
like this obvious in the future.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This was a mistake that was present before, but never got noticed until
we converted over to using nvidia's class headers for display
programming. Luckily though it never caused any problems, since we
always end up calling crc907d_set_src() after head907d_mode().
So, let's get rid of this.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmAOFRIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG4lcH/jFAG+AXR6T2K3dG
adJmdAWQKdDj71Ruoyefx5GSbD0B+rM1UcxOQgmZem2127RJgfDBBVYyjSwh7H1F
LRJdN6+NKReL2OW/HMnufvpVMvWICTWHInyvsqKqp+Yo4GC5z46OtsmzSayYgTaP
v2G9auC/rSUlzmQux9EAbTKDeNGMum3dt2rfsmnIDymBSHoPbizXF93/2hoo9jwx
BZQCq0nYBCa9pEdsmgvqKkb/Y5+CSFoe02qdUZFIuwh6qd/XPfeDPSu4O3z4J9g6
x8G+f7doeU0nzsAP+K0lG7ulAygxRHm5Bn2rwVdlYfihAuPNyF+Ua3duxBvjOBEY
7w/UQ64=
=ZWS9
-----END PGP SIGNATURE-----
Merge tag 'v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Backmerge v5.11-rc5 into drm-next to clean up a bunch of conflicts we are dragging around.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cross-subsystem Changes:
- Includes gvt-gt-next-2021-01-18 + header check fix for GVT
Driver Changes:
- Fix for #2955: Clear potentially malicious register state before
executing clear residuals security mitigation (Chris)
- Fixes that lead to marking per-engine-reset as supported on Gen7
(Chris)
- Remove per-client stats from debugfs/i915_gem_objects) (Tvrtko, Chris)
- Add arbitration check before semaphore wait (Chris)
- Apply interactive priority to explicit flip fences (Chris)
- Make GEM errors non-fatal by default to help capturing logs during
development (Chris)
- Fix object page offset within a region in error capture (CQ, Matt A)
- Close race between enable_breadcrumbs and cancel_breadcrumbs (Chris)
- Almagamate clflushes on suspend/freeze to speed up S/R (Chris)
- Protect used framebuffers from casual eviction (Chris)
- Fix the sgt.pfn sanity check (Kui, Matt A)
- Reduce locking around i915_request.lock and ctx->engines_mutex (Chris)
- Simplify tracking for engine->fw_active and stats.active (Chris)
- Constrain pool objects by mapping type (Chris, Matt A)
- Use shrinkable status for unknown swizzle quirks (Chris)
- Do not suspend bonded requests if one hangs (Chris)
- Restore "Skip over completed active execlists" optimization (Chris)
- Move stolen node into GEM object union (Chris)
. Split gem_create into own file (Matt A)
- Convert object_create into object_init in LMEM region code (Matt A)
- Reduce test_and_set_bit to set_bit in i915_request_submit() (Chris)
- Mark up protected uses of 'i915_request_completed' (Chris)
- Remove extraneous inline modifiers (Chris)
- Add function to define defaults for GuC/HuC enable (John)
- Improve code locality by moving closer to single user (Matt A, Chris)
- Compiler warning fixes (Matt A, Chris)
- Selftest / CI improvements (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121150747.GA58732@jlahtine-mobl.ger.corp.intel.com
Starting from vangogh, the ATCL2 and DAGB0 registers relative
to mgcg/ls has changed.
For MGCG:
Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL.
For MGLS:
Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL.
Add DAGB0_(WR/RD)_CGTT_CLK_CTRL registers.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GCR_GENERAL_CNTL is defined differently in gc_10_1_0_offset.h and
gc_10_3_0_offset.h. Update GCR_GENERAL_CNTL for Vangogh.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the renoir there is no need GpuChangeState message set to exit gfxoff in the s0i3 resume since
mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL has been added in the s0i3 FSDL.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
Heavy corruption or blank screen reported on wake,
with 6k display connected and FEC enabled
[how]
When Disable/Enable stream for display pipes on HPDRX,
DC should take into account ODM split pipes.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
These can differ per ASIC or not be present. Don't call the dcn20 ones
directly but rather the ones defined by the ASIC init table.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
Function decide_dp_link_settings() loops infinitely when required bandwidth
can't be supported.
How:
Check the required bandwidth against verified_link_cap before trying to
find a link setting for it.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Bing Guo <bing.guo@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When no displays are currently enabled, display driver should not
disallow PSTATE switching.
[How]
Allow PSTATE switching if either the active configuration supports it,
or there are no active displays.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
dram clock change latencies get updated using ddr4 latency table, but
that update does not happen before validation. This value
should not be the default and should be number received from
df for better mode support.
This may cause a PState hang on high refresh panels with short vblanks
such as on 1080p 360hz or 300hz panels.
[HOW]
Update latency from 23.84 to 11.72.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ip discovery is supported on green sardine, it doesn't need gpu info
firmware anymore.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.10.x
[WHY]
Previously as MPO + ODM Combine was not supported, finding secondary pipes
for each case was mutually exclusive. Now that both are supported at the same
time, both cases should be taken into account when finding a secondary pipe.
[HOW]
If a secondary pipe cannot be found based on previous bottom pipe,
search for a second pipe using next_odm_pipe instead.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.10.x
./drivers/gpu/drm/i915/gvt/cmd_parser.h:53:44: error: ‘struct intel_vgpu’ declared inside parameter list will not be visible outside of this definition or declaration
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121132558.2893-1-chris@chris-wilson.co.uk
Now that we are careful to always force-restore contexts upon rewinding
(where necessary), we can restore our optimisation to skip over
completed active execlists when dequeuing.
Referenecs: 35f3fd8182 ("drm/i915/execlists: Workaround switching back to a completed context")
References: 8ab3a3812a ("drm/i915/gt: Incrementally check for rewinding")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210120121718.26435-2-chris@chris-wilson.co.uk
Simplify the frontbuffer unpin by removing the lock requirement. The LRU
bumping was primarily to protect the GTT from being evicted and from
frontbuffers being eagerly shrunk. Now we protect frontbuffers from the
shrinker, and we avoid accidentally evicting from the GTT, so the
benefit from bumping LRU is no more, and we can save more time by not.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-6-chris@chris-wilson.co.uk
In the shrinker, we protect framebuffers from light reclaim as we
typically expect framebuffers to be reused in the near future (and with
low latency requirements). We can apply the same logic to the GGTT
eviction and defer framebuffers to the second pass only used if the
caller is desperate enough to wait for space to become available.
In most cases, the caller will use a smaller partial vma instead of
trying to force the object into the GGTT if doing so will cause other
users to be evicted.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-5-chris@chris-wilson.co.uk
Give obj->mm.quirked a name much more reflective of its purpose
(i915_gem_object_has_tiling_quirk) and move it from the obj->mm field as
it doesn't denote a quirk of the backing store, but a quirk in the
object in its treatment of the backing pages, similar to tiling modes.
Then instead of abusing the pinned status of the buffer to protect it
from the shrinker, we can instead hide the buffer from the shrinker so
it is never considered for being swapped.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-4-chris@chris-wilson.co.uk
The obj->stolen is currently used to identify an object allocated from
stolen memory. This dates back to when there were just 1.5 types of
objects, an object backed by shmemfs and an object backed by shmemfs
with a contiguous physical address. Now that we have several different
types of objects, we no longer want to treat stolen objects as a special
case.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-3-chris@chris-wilson.co.uk
When flushing objects larger than the CPU cache it is preferrable to use
a single wbinvd() rather than overlapping clflush(). At runtime, we
avoid wbinvd() due to its system-wide latencies, but during
singlethreaded suspend, no one will observe the imposed latency and we
can opt for the faster wbinvd to clear all objects in a single hit.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-2-chris@chris-wilson.co.uk
When flushing objects larger than the CPU cache it is preferrable to use
a single wbinvd() rather than overlapping clflush(). At runtime, we
avoid wbinvd() due to its system-wide latencies, but during
singlethreaded suspend, no one will observe the imposed latency and we
can opt for the faster wbinvd to clear all objects in a single hit.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-1-chris@chris-wilson.co.uk
amd-drm-next-5.12-2021-01-20:
amdgpu:
- Fix non-x86 build
- W=1 fixes from Lee Jones
- Enable GPU reset on Navy Flounder
- Kernel doc fixes
- SMU workload profile fixes for APUs
- Display updates
- SR-IOV fixes
- Vangogh SMU feature enablment and bug fixes
- GPU reset support for Vangogh
- Misc cleanups
Conflicts:
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.c
Resolve the conflict by picking the initialization value from amd from
f03e80d2e8 ("drm/amd/display: Initialize stack variable") over the
one Linus picked in 61d791365b ("drm/amd/display: avoid
uninitialized variable warning"). It shouldn't matter.
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210120060951.22600-1-alexander.deucher@amd.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Sanity check the object size before allocating a new gem object.
Fixes: 97d5539632 ("drm/i915/region: convert object_create into object_init")
Testcase: igt/gem_create/create-massive
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210120104714.112812-1-matthew.auld@intel.com
There is a module parameter for controlling what GuC/HuC features are
enabled. Setting to -1 means 'use the default'. However, the default
was not well defined, out of date and needs to be different across
platforms.
The default is now to disable both GuC and HuC on legacy platforms
where legacy means TGL/RKL and anything prior to Gen12. For new
platforms, the default is to load HuC but not enable GuC submission
as that has not landed yet.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113220724.2484897-1-John.C.Harrison@Intel.com
UAPI Changes:
- Fix fourcc macro for amlogic video fbc.
Cross-subsystem Changes:
- Export pci_rebar_bytes_to_size.
- Add a PCI quirk to increase bar0 for RX 5600 XT Pulse to max possible size.
- Convert devicetree bindings to use the OF graph schema.
- Update s6e63m0 bindings.
- Make omapfb2 DSI_CM incompatible with drm/omap2 DSI-CM because of
module conflicts.
- Add Zack Rusin as vmwgfx maintainer.
- Add CONFIG_DMABUF_DEBUG for validating dma-buf users don't loo kat struct page when importing or detaching.
Core Changes:
- Remove references to drm_device.pdev
- Fix regression in ttm_bo_move_to_lru_tail().
- Assorted docbook updates.
- Do not send dp-mst hotplug events on error when probing.
- Move some agp macros to agpsupport.c, so it's not always compiled.
- Move drm_need_swiotlb.h to drm_cache.c
- Only build drm_memory.o for legacy drivers, and move CONFIG_DRM_VM to legacy.
- Nuke drm_device.hose
- Warn when the ttm resource manager is non-empty when disabling.
- Assorted small fixes.
Driver Changes:
- Small assorted fixes in radeon, v3d, hisilicon, mipi-dbi, panfrost, hibmc, vc4, amdgpu, vkms, vmwgfx.
- Move hisilicon to use simple encode.
- Add writeback connector to vkms.
- Add support for BT2020 to DE3.
- Use gem prime mmap helpers in vc4, and move the mmap function upwards.
- Use managed drm device, and cleanup error paths and display registers in vmwgfx.
- Use correct bus_format and connector_type for innolux_n116bge.
- Fix a lot of warnings with W=1 (Lee Jones)
-----BEGIN PGP SIGNATURE-----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=JIou
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-01-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.12:
UAPI Changes:
- Fix fourcc macro for amlogic video fbc.
Cross-subsystem Changes:
- Export pci_rebar_bytes_to_size.
- Add a PCI quirk to increase bar0 for RX 5600 XT Pulse to max possible size.
- Convert devicetree bindings to use the OF graph schema.
- Update s6e63m0 bindings.
- Make omapfb2 DSI_CM incompatible with drm/omap2 DSI-CM because of
module conflicts.
- Add Zack Rusin as vmwgfx maintainer.
- Add CONFIG_DMABUF_DEBUG for validating dma-buf users don't loo kat struct page when importing or detaching.
Core Changes:
- Remove references to drm_device.pdev
- Fix regression in ttm_bo_move_to_lru_tail().
- Assorted docbook updates.
- Do not send dp-mst hotplug events on error when probing.
- Move some agp macros to agpsupport.c, so it's not always compiled.
- Move drm_need_swiotlb.h to drm_cache.c
- Only build drm_memory.o for legacy drivers, and move CONFIG_DRM_VM to legacy.
- Nuke drm_device.hose
- Warn when the ttm resource manager is non-empty when disabling.
- Assorted small fixes.
Driver Changes:
- Small assorted fixes in radeon, v3d, hisilicon, mipi-dbi, panfrost, hibmc, vc4, amdgpu, vkms, vmwgfx.
- Move hisilicon to use simple encode.
- Add writeback connector to vkms.
- Add support for BT2020 to DE3.
- Use gem prime mmap helpers in vc4, and move the mmap function upwards.
- Use managed drm device, and cleanup error paths and display registers in vmwgfx.
- Use correct bus_format and connector_type for innolux_n116bge.
- Fix a lot of warnings with W=1 (Lee Jones)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c3ad775-48ce-33ee-e4c6-a5e1e540f845@linux.intel.com
While reviewing Christian's annotation patch I noticed that we have a
user-after-free for the WAIT_FOR_SUBMIT case: We drop the syncobj
reference before we've completed the waiting.
Of course usually there's nothing bad happening here since userspace
keeps the reference, but we can't rely on userspace to play nice here!
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Fixes: bc9c80fe01 ("drm/syncobj: use the timeline point in drm_syncobj_find_fence v4")
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.2+
Link: https://patchwork.freedesktop.org/patch/msgid/20210119130318.615145-1-daniel.vetter@ffwll.ch
If we enable_breadcrumbs for a request while that request is being
removed from HW; we may see that the request is active as we take the
ce->signal_lock and proceed to attach the request to ce->signals.
However, during unsubmission after marking the request as inactive, we
see that the request has not yet been added to ce->signals and so skip
the removal. Pull the check during cancel_breadcrumbs under the same
spinlock as enabling so that we the two tests are consistent in
enable/cancel.
Otherwise, we may insert a request onto ce->signals that we expect should
not be there:
intel_context_remove_breadcrumbs:488 GEM_BUG_ON(!__i915_request_is_complete(rq))
While updating, we can note that we are always called with
irqs-disabled, due to the engine->active.lock being held at the single
caller, and so remove the irqsave/restore making it symmetric to
enable_breadcrumbs.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2931
Fixes: c18636f763 ("drm/i915: Remove requirement for holding i915_request.lock for breadcrumbs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: <stable@vger.kernel.org> # v5.10+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119162057.31097-1-chris@chris-wilson.co.uk
Currently, if a modeset/pageflip needs to wait for render completion to
an object, we boost the priority of that rendering above all other work.
We can apply the same interactive priority boosting to explicit fences
that we can unwrap into a native i915_request (i.e. sync_file).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119204454.10343-1-chris@chris-wilson.co.uk
In a few places we always end up mapping the pool object with the FORCE
constraint(to prevent hitting -EBUSY) which will destroy the cached
mapping if it has a different type. As a simple first step, make the
mapping type part of the pool interface, where the behaviour is to only
give out pool objects which match the requested mapping type.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119133106.66294-4-matthew.auld@intel.com
Looks like it belongs there anyway, otherwise we have to include the
entirety of i915_gem_object.h just to get at the enum.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119133106.66294-3-matthew.auld@intel.com
io_mapping_map_wc() expects the offset to be relative to the iomapping
base address. Currently we just pass in the physical address for the
page which only works if the region.start starts at zero.
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119133106.66294-2-matthew.auld@intel.com
For the device local-memory case, sgt.pfn will always be equal to zero,
since we instead use sgt.dma. Also, for device local-memory it is
perfectly valid for it to start from zero anyway, so no need to add a
new check for that either.
Signed-off-by: Kui Wen <kui.wen@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119133106.66294-1-matthew.auld@intel.com
