Commit Graph

163 Commits

Author SHA1 Message Date
Hannes Reinecke
cc199e7846 scsi: libsas: move bus_reset_handler() to target_reset_handler()
The bus reset handler is calling I_T Nexus reset, which logically is a
target reset as it need to specify both the initiator and the target.
So move it to target reset.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25 17:21:10 -04:00
Pan Bian
bc1371c181 scsi: pm8001: fix double free in pm8001_pci_probe
In function pm8001_pci_probe(), on errors that the control flow jumps to
label err_out_ha_free, function pm8001_free() is called. In pm8001_free(),
scsi_host_put() is called to release shost, which keeps the return value
of scsi_host_alloc(). After pm8001_free() returns, kfree() is called to
free shost again, resulting in a double free bug. This patch removes
scsi_host_put() from pm8001_free() and explicitly calls scsi_host_put()
to release Scsi_Host in need.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-10 19:55:35 -04:00
Johannes Thumshirn
c5ce0abeb6 scsi: sas: move scsi_remove_host call into sas_remove_host
Move scsi_remove_host call into sas_remove_host and remove it from SAS
HBA drivers, so we don't mess up the ordering. This solves an issue with
double deleting sysfs entries that was introduced by the change of sysfs
behaviour from commit bcdde7e221 ("sysfs: make __sysfs_remove_dir()
recursive").

[mkp: addressed checkpatch complaints]

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Suggested-by: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: James Bottomley <jejb@linux.vnet.ibm.com>
Cc: Jinpu Wang <jinpu.wang@profitbricks.com>
Cc: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinpu Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-21 10:34:29 -04:00
Christoph Hellwig
a76037ff34 scsi: pm8001: switch to pci_irq_alloc_vectors
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-06 19:12:30 -05:00
Baoyou Xie
7efa59e160 scsi: pm8001: Mark symbols static where possible
We get 2 warnings when building kernel with W=1:
drivers/scsi/pm8001/pm8001_sas.c:530:23: warning: no previous prototype for 'pm8001_alloc_dev' [-Wmissing-prototypes]
drivers/scsi/pm8001/pm8001_hwi.c:4495:5: warning: no previous prototype for 'pm8001_chip_phy_stop_req' [-Wmissing-prototypes]

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.  So this
patch marks these functions with 'static'.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Lindar Liu <lindar_liu@usish.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26 21:10:45 -04:00
Julia Lawall
014e8ba76e pm8001: fix typo
firmare -> firmware

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-12 23:16:31 -04:00
Hannes Reinecke
661ce1f0c4 libata/libsas: Define ATA_CMD_NCQ_NON_DATA
Define the NCQ NON DATA command and update libsas to handle it
correctly.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09 12:36:44 -04:00
Hannes Reinecke
ef026b18bb libsas: enable FPDMA SEND/RECEIVE
Update libsas and dependent drivers to handle FPDMA
SEND/RECEIVE correctly.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09 12:36:44 -04:00
David Daney
e83596b41c pm80xx: Remove bogus address masking in pm8001_ioremap()
It is unclear what the original intent of the masking was, but it is
clearly incorrect to truncate a physical address before calling
ioremap().  On systems where there are valid physical address bits above
bit-31 (arm64 for example) the result is an eventual OOPs when
initializing the driver.

Remove the bogus code to fix it.

Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15 16:53:18 -04:00
James Bottomley
febdfbd213 SCSI queue for 4.4.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIVAwUAVkP2pu7pYBp1xd49AQL+dg/6Atk5KH17IKE+SGIAaIqS9rhckwqOB6qK
 7pT5gbvuyA8nB4eXUFPFk6VejYa6PdHL5wVf7a2w9pPJAoIogTkiYb9PvlRLbzBB
 OrBFfm8h00psQd8YpzEAIdPvVQGsR/OTqYVMXnrNN0pra81iFWwaiB5QcJukadYl
 +0d/2wJnw4887ZReO/51n9fJkPwIvs+jtCj7k36yX9NL9SRm8s/JlH3aVGRSzIBy
 ip7ahtdcw7ncqXCWJVzQ1HCdEiwcWkbMNI8gTFpJ4V5GR6A1ZkN+jNn88C/f5qQF
 1uAsIBy9B99mU5Rz7Vrbl8710DjT2SkVgQ43rC54MzszTuj34y4GNS+sCZyTfzFG
 vnEVWyX7Jzg1SLbp8KxjhhCrhegG8vXnyr6RJDfEzHsUHLxbnMKNGclDOny5NG4n
 TmXGFTfDKBVcHwFLOwwKXsjKicyirBDIRb2eKnqC0j56kFNQp9pWhFA62Xi/AOe6
 vqMj2I2t30za5X3iZv5XEvhv63fFMx2nflcYIA+rCqq1AMaC7T0X170czKb5g1v+
 aSZZ0qCFhMFUWETlHjOQSbHkZ6fsWJlgaPZS0ODsiGrbxXPtrHXH1lbLAh6ECveu
 O8dYKqC2kJbBoolqD2e59z1fQ6cW45sUHxiDjaeqgTlexwVEy25+t8uIBPUnRNwI
 1YTHKn3U+ug=
 =g6ZL
 -----END PGP SIGNATURE-----

Merge tag '4.4-scsi-mkp' into misc

SCSI queue for 4.4.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-12 07:06:18 -05:00
Christoph Hellwig
64d513ac31 scsi: use host wide tags by default
This patch changes the !blk-mq path to the same defaults as the blk-mq
I/O path by always enabling block tagging, and always using host wide
tags.  We've had blk-mq available for a few releases so bugs with
this mode should have been ironed out, and this ensures we get better
coverage of over tagging setup over different configs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-09 17:11:57 -08:00
Benjamin Rood
2a188cb42b pm80xx: remove the SCSI host before detaching from SAS transport
Previously, when this module was unloaded via 'rmmod' with at least one
drive attached, the SCSI error handler thread would become stuck in an
infinite recovery loop and lockup the system, necessitating a reboot.

Once the SAS layer is detached, the driver will fail any subsequent
commands since the target devices are removed.  However, removing the
SCSI host generates a SYNCHRONIZE CACHE (10) command, which was failed
and left the error handler no method of recovery.

This patch simply removes the SCSI host first so that no more commands
can come down, prior to cleaning up the SAS layer.  Note that the stack
is built up with the SCSI host first, and then the SAS layer.  Perhaps
it should be reversed for symmetry, so that commands cannot be sent to
the pm80xx driver prior to attaching the SAS layer?

What was really strange about this bug was that it was introduced at
commit cff549e486 ("[SCSI]: proper state checking and module refcount
handling in scsi_device_get").  This commit appears to tinker with how
the reference counting is performed for SCSI device objects.  My theory
is that prior to this commit, the refcount for a device object was
blindly incremented at some point during the teardown process which
coincidentially made the device stick around during the procedure, which
also coincidentially made any commands sent to the driver not fail
(since the device was technically still "there").  After this commit was
applied, my theory is the refcount for the device object is not being
incremented at a specific point anymore, which makes the device go away,
and thus made the pm80xx driver fail any subsequent commands.

You may also want to see the following for more details:

[1] http://www.spinics.net/lists/linux-scsi/msg37208.html
[2] http://marc.info/?l=linux-scsi&m=144416476406993&w=2

Signed-off-by: Benjamin Rood <brood@attotech.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-09 19:41:31 -05:00
Benjamin Rood
c913df3f3d pm80xx: avoid a panic if MSI(X) interrupts are disabled
If MSI(X) interrupts are disabled via the kernel command line
(pci=nomsi), the pm8001 driver will kernel panic because it does not
detect that MSI interrupts are disabled and will soldier on and attempt to
configure MSI interrupts anyways.  This leads to a kernel panic, most
likely because a required data structure is not available down the
line.  Using the pci_msi_enabled() function in order to detect if MSI
interrupts are enabled before configuring them resolves this issue and
avoids a kernel panic when the module is loaded.  Additionally, the
irq_vector structure must be initialized when legacy interrupts are
being used otherwise legacy interrupts will simply not function and
result in another panic.

Signed-off-by: Benjamin Rood <brood@attotech.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-02 23:41:13 -05:00
Benjamin Rood
b650a8806e pm80xx: wait a minimum of 500ms before issuing commands to SPCv
The documentation for the 8070 and 8072 SPCv chip explicitly states that
a minimum of 500ms must elapse before issuing commands, otherwise the
SPCv may not process them and the firmware may get into an unrecoverable
state requiring a reboot.  While the Linux guys will probably think this
is 'racy', it is called out in the chip documentation and inserting this
delay makes power management function properly.

Signed-off-by: Benjamin Rood <brood@attotech.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-02 23:40:35 -05:00
Benjamin Rood
faf321b0b7 pm80xx: do not examine registers for iButton feature if ATTO adapter
ATTO adapters do not support this feature.  If the firmware fails to be
ready, it should not check the examined registers in order to examine
the state of the feature in order to prevent undefined behavior.

Signed-off-by: Benjamin Rood <brood@attotech.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-02 23:39:35 -05:00
Benjamin Rood
c5614df7ff pm80xx: set PHY profiles for ATTO 12Gb SAS controllers
PHY profiles are not saved in NVRAM on ATTO 12Gb SAS controllers.
Therefore, in order for the controller to function in a wide range of
configurations, the PHY profiles must be statically set.  This patch
provides the necessary functionality to do so.

Signed-off-by: Benjamin Rood <brood@attotech.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-02 23:39:02 -05:00
Benjamin Rood
10efa460fe pm80xx: add support for ATTO devices during SAS address initiailization
ATTO SAS controllers retrieve the SAS address from the NVRAM in a location
different from non-ATTO PMC Sierra SAS controllers.  This patch makes the
necessary adjustments in order to retrieve the SAS address on these types
of adapters.

Signed-off-by: Benjamin Rood <brood@attotech.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-02 23:36:32 -05:00
Benjamin Rood
b2dece4859 pm80xx: add ATTO PCI IDs to pm8001_pci_table
These PCI IDs allow the pm8001 driver to load against ATTO 12Gb SAS
controllers that use PMC Sierra 8070 and PMC Sierra 8072 SAS chips.

Signed-off-by: Benjamin Rood <brood@attotech.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-02 23:35:53 -05:00
Benjamin Rood
db9d4034da pm80xx: add support for PMC Sierra 8070 and PMC Sierra 8072 SAS controllers
These SAS controllers support speeds up to 12Gb.

Signed-off-by: Benjamin Rood <brood@attotech.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-02 23:34:12 -05:00
Benjamin Rood
da2dd6184b pm80xx: configure PHY settings based on subsystem vendor ID
Previuosly, all PMC Sierra 80xx controllers are assumed to be a
motherboard controller, except if the subsystem vendor ID was equal to
PCI_VENDOR_ID_ADAPTEC.  The driver then attempts to load PHY settings
from NVRAM.  While this may be correct behavior for most controllers, it
does not work with Adaptec and ATTO controllers since they do not store
PHY settings in NVRAM and choose to use either custom PHY settings or
chip defaults.  Loading random values from NVRAM may cause the
controllers to malfunction in this edge case.

Signed-off-by: Benjamin Rood <brood@attotech.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-02 23:33:12 -05:00
Johannes Thumshirn
50acde8ed3 pm80xx: Don't override ts->stat on IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY
In case psataPayload->status has a status of IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY
ts->stat gets set to SAS_OPEN_REJECT but a missing 'break' statement causes a
fallthrough to the default handler of the switch statement overriding ts->stat
to SAS_DEV_NO_RESPONSE.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-09-06 11:53:31 -07:00
Viswas G
1cd129918f pm80xx: Bump pm80xx driver version to 0.1.38
Bump pm80xx driver version to 0.1.38.

Signed-off-by: Viswas G <Viswas.G@pmcs.com>
Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26 17:19:05 -07:00
Viswas G
27ecfa5e79 pm80xx: Handling Invalid SSP Response frame
The request has to be retried incase if the length of the SSP
Response IU is invalid.

Signed-off-by: Viswas G <Viswas.G@pmcs.com>
Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26 17:18:31 -07:00
Viswas G
8414cd8057 pm80xx: Add PORT RECOVERY TIMEOUT support
PORT RECOVERY TIMEOUT is the maximum time between the controller's
detection of the PHY down until the receipt of the ID_Frame (from the
same remote SAS port). If the time expires before the ID_FRAME is
received, the port is considered INVALID and can be removed. The
IOP_EVENT_PORT_RECOVERY_TIMER_TMO event is reported following the
IOP_EVENT_ PHY_DOWN event when the PHY/port does not recover after
Port Recovery Time.

Signed-off-by: Viswas G <Viswas.G@pmcs.com>
Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26 17:17:52 -07:00
Viswas G
3b77894b2c pm80xx: Remove unnecessary phy disconnect while link error
If the link error happens, we don't need to disconnect the phy,
which will remove the drive. Instead acknowledging the controller
and logging the error will be enough.

Signed-off-by: Viswas G <Viswas.G@pmcs.com>
Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26 17:17:05 -07:00
Viswas G
3b700e3411 pm80xx: Fix for Incorrect DMA Unmapping of SG List
In pm8001_ccb_task_free(), the dma unmapping is done based on
ccb->n_elem value. This should be initialized to zero in the
task_abort(). Otherwise, pm8001_ccb_task_free() will try for
dma_unmap_sg() which is invalid for task abort and can lead to
kernel crash.

Changes From V1:
None

Signed-off-by: Viswas G <Viswas.G@pmcs.com>

Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26 17:11:01 -07:00
Viswas G
842784e0d1 pm80xx: Update For Thermal Page Code
Thermal page code has been changed to 7 for the 12G controllers.

Signed-off-by: Viswas G <Viswas.G@pmcs.com>
Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26 17:10:48 -07:00
Viswas G
3a1ae96774 pm80xx: Corrected device state changes in I_T_Nexus_Reset.
In Nexus reset the device state request are not needed.

Signed-off-by: Viswas G <Viswas.G@pmcs.com>
Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26 17:07:39 -07:00
Viswas G
b093d59036 pm80xx: Updated link rate
Updated 12G linkrate to libsas.

Signed-off-by: Viswas G <Viswas.G@pmcs.com>
Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26 17:06:26 -07:00
Suresh Thiagarajan
d8571b1ecb pm80xx: Added pm8006 controller support
Signed-off-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Signed-off-by: Viswas G <Viswas.G@pmcs.com>
Acked-by: Jack Wang <xjtuwjp@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-12 11:11:14 -07:00
Hannes Reinecke
b84b1d522f scsi: Do not set cmd_per_lun to 1 in the host template
'0' is now used as the default cmd_per_lun value,
so there's no need to explicitly set it to '1' in the
host template.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-31 18:06:28 -07:00
James Bottomley
e617457691 Merge remote-tracking branch 'scsi-queue/drivers-for-3.19' into for-linus 2014-12-18 05:56:29 -08:00
Linus Torvalds
4e8790f77f Merge branch 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata changes from Tejun Heo:
 "The only interesting piece is the support for shingled drives.  The
  changes in libata layer are minimal.  All it does is identifying the
  new class of device and report upwards accordingly"

* 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: Remove FIXME comment in atapi_request_sense()
  sata_rcar: Document deprecated "renesas,rcar-sata"
  sata_rcar: Add clocks to sata_rcar bindings
  ahci_sunxi: Make AHCI_HFLAG_NO_PMP flag configurable with a module option
  libata-scsi: Update SATL for ZAC drives
  libata: Implement ATA_DEV_ZAC
  libsas: use ata_dev_classify()
2014-12-11 18:52:37 -08:00
Christoph Hellwig
efc3c1df5f scsi: remove ->change_queue_type method
Since we got rid of ordered tag support in 2010 the prime use case of
switching on and off ordered tags has been obsolete.  The other function
of enabling/disabling tagging entirely has only been correctly implemented
by the 53c700 driver and isn't generally useful.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-12-04 09:55:45 +01:00
Christoph Hellwig
79855d1785 libsas: remove task_collector mode
The task_collector mode (or "latency_injector", (C) Dan Willians) is an
optional I/O path in libsas that queues up scsi commands instead of
directly sending it to the hardware.  It generall increases latencies
to in the optiomal case slightly reduce mmio traffic to the hardware.

Only the obsolete aic94xx driver and the mvsas driver allowed to use
it without recompiling the kernel, and most drivers didn't support it
at all.

Remove the giant blob of code to allow better optimizations for scsi-mq
in the future.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
2014-11-27 16:40:24 +01:00
Christoph Hellwig
c40ecc12cf scsi: avoid ->change_queue_depth indirection for queue full tracking
All drivers use the implementation for ramping the queue up and down, so
instead of overloading the change_queue_depth method call the
implementation diretly if the driver opts into it by setting the
track_queue_depth flag in the host template.

Note that a few drivers validated the new queue depth in their
change_queue_depth method, but as we never go over the queue depth
set during slave_configure or the sysfs file this isn't nessecary
and can safely be removed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
2014-11-24 14:45:12 +01:00
Christoph Hellwig
2ecb204d07 scsi: always assign block layer tags if enabled
Allow a driver to ask for block layer tags by setting .use_blk_tags in the
host template, in which case it will always see a valid value in
request->tag, similar to the behavior when using blk-mq.  This means even
SCSI "untagged" commands will now have a tag, which is especially useful
when using a host-wide tag map.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12 11:19:43 +01:00
Hannes Reinecke
1cbd772d9a libsas: use ata_dev_classify()
Use the ata device class from libata in libsas instead of checking
the supported command set and switch to using ata_dev_classify()
instead of our own method.

Cc: Tejun Heo <tj@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-11-05 11:22:06 -05:00
Suresh Thiagarajan
9e0328453e pm8001: Update nvmd response data to request buffer
Instead of using the virt_ptr use request buffer for copying
back the nvmd response data and use the same in request function also

Signed-off-by: Suresh Thiagarajan <suresh.thiagarajan@pmcs.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16 09:09:48 -07:00
Linus Torvalds
88ec63d6f8 SCSI misc on 20140815
This is a small set of updates which missed the first pull.  It's more msix
 updates, some iscsi and qla4xxx fixes, we also have some string null
 termination fixes a return value fix and a couple of pm8001 firmware fixes.
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJT7mGIAAoJEDeqqVYsXL0MikgIAKAa6LYOyOV8lK+BVBMR0Uhm
 tV7ByzA2Ii1CX6I3QMeYziK9Jk9jfkPwia+gytef1gHui/O47m5oa0WJ6SaLJPa/
 i5Zc2ZfhIi0tykEQQ6sXYZiIHkIx4yCJr/YPa/SzifyvDEKndtBUbXzpTTIWYMJG
 gBjhVXapwNOJWfkWW6WE26DIpqr1Vhn3vU0IRFH9PQ1F8iLaKPwyJIpZSbZNxc9m
 Uq3KKthKG2sZESHJpIjBq+fogGmtm0DSmiRPnDo5KsxoYXlrMgqK3JAs1NpIOZy/
 Hg8raobuL2lzQFddBKx6PWZZgDb9P5KZvEEWpycNU8+xG1ny5qMe0AZoySs6eG4=
 =JzXC
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull more SCSI changes from James Bottomley:
 "This is a small set of updates which missed the first pull.  It's more
  msix updates, some iscsi and qla4xxx fixes, we also have some string
  null termination fixes a return value fix and a couple of pm8001
  firmware fixes.

  Just a note, we do have a couple of bug fixes coming under separate
  cover, but they don't have to be part of the merge window"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  iscsi class: Fix freeing of skb in get host error path
  scsi: fix u14-34f printk format warnings
  pm8001: fix pm8001_store_update_fw
  pm8001: Fix erratic calculation in update_flash
  pm8001: Update MAINTAINERS list
  libiscsi: return new error code when nop times out
  iscsi class: fix get_host_stats return code when not supported
  iscsi class: fix get_host_stats error handling
  qla4xxx: fix get_host_stats error propagation
  qla4xxx: check the return value of dma_alloc_coherent()
  scsi: qla4xxx: ql4_mbx.c: Cleaning up missing null-terminate in conjunction with strncpy
  scsi: qla4xxx: ql4_os.c: Cleaning up missing null-terminate in conjunction with strncpy
  qla4xxx: Use pci_enable_msix_exact() instead of pci_enable_msix()
  pm8001: Use pci_enable_msix_exact() instead of pci_enable_msix()
2014-08-15 18:28:58 -06:00
Joe Perches
7c845eb5e1 scsi: use pci_zalloc_consistent
Remove the now unnecessary memset too.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Adam Radford <linuxraid@lsi.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Cc: Dario Ballabio <ballabio_dario@emc.com>
Cc: Michael Neuffer <mike@i-Connect.Net>
Cc: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Cc: Neela Syam Kolli <megaraidlinux@lsi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:29 -07:00
Tomas Henzl
6f8f31c7a8 pm8001: fix pm8001_store_update_fw
The current implementation may mix the negative value returned from
pm8001_set_nvmd with count. -(-ENOMEM) could be interpreted as bytes
programmed, this patch fixes it.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-01 08:16:40 -04:00
Tomas Henzl
5bd355ee3b pm8001: Fix erratic calculation in update_flash
The loopcount is calculated by using some weird magic. Use instead a boring
macro.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-01 08:16:40 -04:00
Alexander Gordeev
b4d511e5c7 pm8001: Use pci_enable_msix_exact() instead of pci_enable_msix()
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Reviewed-by: Jack Wang <xjtuwjp@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-30 07:49:35 -04:00
Alexander Gordeev
5607de73db pm8001: Fix invalid return when request_irq() failed
When a call to request_irq() failed pm8001_setup_msix()
still returns the success. This udate fixes the described
misbehaviour.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Acked-by: Jack Wang <xjtuwjp@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-29 08:38:53 -04:00
Tomas Henzl
f3a0655f9b pm8001: fix a memory leak in nvmd_resp
Instead of copying information to fw_control_context free it.

The task is forgotten thus also the reference to fw_control_context
and the completion thread takes the info from virt_ptr again.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25 17:17:05 -04:00
Tomas Henzl
31d05e5b14 pm8001: fix update_flash
The driver checks the return valu, but after he tries to wait_for_completion
which might never happen.  Also the ioctl buffer is freed at the end of the
function, so the first removal is not needed.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25 17:17:05 -04:00
Tomas Henzl
9422e864fa pm8001: fix a memory leak in flash_update
ccb->fw_control_context is copied to local fw_control_context and
the local variable is never used later

Free ccb->fw_control_context.  The task is forgotten thus also the
reference to fw_control_context and the completion thread takes the info
from virt_ptr again.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25 17:17:05 -04:00
Rickard Strandqvist
da225498d9 pm8001: Cleaning up uninitialized variables
There is a risk that the variable will be used without being initialized.

This was largely found by using a static code analysis program called cppche

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Acked-by: Jack Wang <xjtuwjp@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25 17:17:05 -04:00
Rickard Strandqvist
d98164461c pm8001: Fix to remove null pointer checks that could never happen
Removal of null pointer checks that could never happen

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Acked-by: Jack Wang <xjtuwjp@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25 17:17:05 -04:00