The standard way to do this is to list out the regulators at the top-
level. Adopt the standard way to fix validation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The standard way to do this is to list out the clocks at the top-level.
Adopt the standard way to fix validation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
- add missing interrupts property to support card serial
- fix node names to follow the DT schema
- add clock-names and reset-names to pcie-phy
-----BEGIN PGP SIGNATURE-----
iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl8IKXkeHHlhbWFkYS5t
YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsG/00P/AqDMwRLTbdQGA1q
4Amcj3yX/xxr+GTKJzNTNHMr4RH/2bKf8cKfYYB1ToReM5mrkihPmGHIh0PloSc7
KDkDK/XFC/mhT1YDCwXlgAkJ3MN9sLTATTW5CyzBdnbi7hNrBGG8wd5RcPd2Qh1x
rmI851KdAesDVLLxLPD6YDU7ce5rUbL5geWSfoRx6WrinNuKR26npTsoxO+IN/Lq
wAYbstuu5hPqGT9kNv4D/ZWCOA9yUFDGu38TfZxEsVJ0qHtVXwaTiZSksFg1wKia
mhgVGoCmHoxp/KY3lQD2SlHUCKfZM5jByvWnmpySfmDCGkQWaGDnHDFeB1XTS3yI
qTvdYSC+72F6rYdqeM8b9cGE/6NMci7UUtMY8Cc53cTOkZgkX+Rm3otiv3csc0sv
NKycWCdVhoDUTlatibOXQsiUVHlCFrOPAWEemseE6V1cNuDmhCgAlH6HMmVRrqo0
6lSDqMb8SqmqXgO8ZU+8zd1JqbIRD3vc/tmuM8Ad41cnEbRMS98cdP/7JN81GOG1
KjJXca2PITHysFp+4ch/wRJo15m4ls3m76J50fw00Ogz6Ej+NGOxnzVjlPvIiVOy
mIrKKMAxWFPcsMoHTKMo9oZZ6Tad/r12yzZmEVGfbgj+8ZdrW6r5ostlUlhzBYG7
D5VJzu0zjoPCKJcBleO+xmB+lmLW
=1kpa
-----END PGP SIGNATURE-----
Merge tag 'uniphier-dt64-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt
UniPhier ARM64 SoC DT updates for v5.9
- add missing interrupts property to support card serial
- fix node names to follow the DT schema
- add clock-names and reset-names to pcie-phy
* tag 'uniphier-dt64-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
arm64: dts: uniphier: Add missing clock-names and reset-names to pcie-phy
arm64: dts: uniphier: Rename ethphy node to ethernet-phy
arm64: dts: uniphier: give fixed port number to support card serial
arm64: dts: uniphier: add interrupts to support card serial
Link: https://lore.kernel.org/r/CAK7LNARK4SKhSW-xwgc3vq7FO7N864jPgzm8NtsGOv8wVFVyBQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
lx2160a rev2 requires 4KB space for type0 and 4KB
space for type1 iATU window. Increase configuration
space size to 8KB to have sufficient space for type0
and type1 window.
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Li Yang <leoyang.li@nxp.com>
Acked-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Define the Eagle/V3MSK board dependent parts of the RPC-IF device node.
Add device nodes for Spansion S25FS512S SPI flash and MTD partitions on it.
Based on the original patches by Dmitry Shifrin.
Signed-off-by: Dmitry Shifrin <dmitry.shifrin@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Link: https://lore.kernel.org/r/fca1d012-29bf-eead-1c0d-4dd837c0bc68@cogentembedded.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Define the Condor/V3HSK board dependent parts of the RPC-IF device node.
Add device nodes for Spansion S25FS512S SPI flash and MTD partitions on it.
Based on the original patches by Dmitry Shifrin.
Signed-off-by: Dmitry Shifrin <dmitry.shifrin@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Link: https://lore.kernel.org/r/322ca212-a45f-cd2c-f1eb-737f0aa42d22@cogentembedded.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
ls1043a-rdb and ls1043a-qds board’s default HW config (such as
pin mux selection) would not enable some USB controllers’
data path, which causing over-current detected on those
controllers. This will hit the case of ‘xhci driver prevent bus suspend
if a root hub port detected over-current condition’, causing system
failed to be suspended. So disable them in device tree to resolve this
issue.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There are 5 thermal zones in ls1043a soc. Add the
rest thermal zone nodes to enable them.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There are 5 thermal zones in ls1046a soc. Add the rest thermal zone
nodes to enable them.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The patch adds ftm_alarm0 DT node for LS1028ARDB board
FlexTimer1 module is used to wakeup the system
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The patch adds ftm_alarm0 DT node for Soc LX2160A
FlexTimer1 module is used to wakeup the system in deep sleep
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add device tree node for first flash (CS0) connected
to all dspi controller.
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Also known as the Lenovo IdeaPad Duet Chromebook.
There are different krane boards with shared resources, hence a
mt8183-kukui-krane.dtsi was created for easily introduce future new
boards. The same happens with the baseboard codenamed kukui where
different variants, apart from kukui variant can take advantage of the
shared resources.
Signed-off-by: Ben Ho <Ben.Ho@mediatek.com>
[originally created by Ben Ho but adapted and ported to mainline]
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200625101757.101775-8-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add the USB3.0 phyter and controller for the MediaTek's MT8183 SoC.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200625101757.101775-7-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Remove the unit address from the DT nodes that doesn't have a reg
property. This fixes the following unit name warnings:
Warning (unit_address_vs_reg): /soc/pinctrl@10005000/mmc0@0: node has a unit name, but no reg or ranges property
Warning (unit_address_vs_reg): /soc/pinctrl@10005000/mmc1@0: node has a unit name, but no reg or ranges property
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200625101757.101775-6-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Remove the unit address from the DT nodes that doesn't have a reg
property. This fixes the following unit name warnings:
Warning (unit_address_vs_reg): /cpus/idle-states/cluster-sleep@0: node has a unit name, but no reg or ranges property
Warning (unit_address_vs_reg): /cpus/idle-states/cluster-sleep@1: node has a unit name, but no reg or ranges property
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200625101757.101775-5-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The MediaTek's peripheral configuration controller is present on the
MT8183 SoC. Add the node for that controller.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200625101757.101775-4-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The regulators are expected to be instantiated with matching the
device-tree compatible, so add the proper compatible name under the
regulators node.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200625101757.101775-3-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Re measure capacity-dmips-mhz on elm and hana:
cpu 1: 9502 DMIPS @ 1703 Mhz
cpu 3: 16250 DMIPS @ 2106 Mhz
==> 740 : 1024
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200706083705.2343150-1-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This adds missing clock-names and reset-names to pcie-phy node according to
Documentation/devicetree/bindings/phy/socionext,uniphier-pcie.yaml.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This renames the node name "ethphy" to "ethernet-phy" according to
Documentation/devicetree/bindings/net/mdio.yaml.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Having a non-MSA (Modem Self-Authentication) SID bypassed breaks modem
sandboxing i.e if a transaction were to originate from it, the hardware
memory protections units (XPUs) would fail to flag them (any transaction
originating from modem are historically termed as an MSA transaction).
Drop the unused non-MSA modem SID on SC7180 SoCs and cheza so that SMMU
continues to block them.
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Fixes: bec71ba243 ("arm64: dts: qcom: sc7180: Update Q6V5 MSS node")
Fixes: 68aee4af5f ("arm64: dts: qcom: sdm845-cheza: Add iommus property")
Cc: stable@vger.kernel.org
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200630081938.8131-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Since commit e69f5dc623 ("dt-bindings: serial: Convert 8250 to
json-schema"), the schema for "ns16550a" is checked.
Since then, 'make ARCH=arm64 dtbs_check' is so noisy because the
required property 'interrupts' is missing.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add @0 unit address to 'soc' node match its 'reg' property and move the
thermal zones out of 'soc' to main root as it this is usually not a
property of a Soc.
This silences DTC warnings:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Warning (simple_bus_reg): /soc/thermal-zones: missing or empty reg/ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add @0 unit address to 'soc' node match its 'reg' property and silence
DTC warning:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
There is no need to keep DMA controller nodes under AMBA bus node.
Remove the "amba" node to fix dtschema warnings like:
amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
LDO12 on Exynos7 Espresso board supplies power to VDDQ_UFS20_RESET, in
case this regulator is OFF, UFS host controller can not send command to
UFS device. To keep this supply ON, set regulator-always-on property for
this LDO.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Once regulators are disabled after kernel boot, on Espresso board silent
hang observed because of LDO7 being disabled. LDO7 actually provide
power to CPU cores and non-cpu blocks circuitries. Keep this regulator
always-on to fix this hang.
Fixes: 9589f7721e ("arm64: dts: Add S2MPS15 PMIC node on exynos7-espresso")
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Some outputs from the RTL8723CS are connected to the PL port (BT_WAKE_AP),
which runs at 1.8V. When BT_WAKE_AP is high, the PL pin this signal is
connected to is overdriven, and the whole PL port's voltage rises
somewhat. This results in changing voltage on the R_PWM pin (PL10),
which is the cause for backlight flickering very noticeably when typing
on a Bluetooth keyboard, because backlight intensity is highly sensitive
to the voltage of the R_PWM pin.
Limit the maximum WiFi/BT I/O voltage to 1.8V to avoid overdriving
the PL port pins via BT and WiFi IO port signals. WiFi and BT
functionality is unaffected by this change.
This completely stops the backlight flicker when using bluetooth.
Fixes: 91f480d409 ("arm64: dts: allwinner: Add initial support for Pine64 PinePhone")
Signed-off-by: Ondrej Jirman <megous@megous.com>
Link: https://lore.kernel.org/r/20200703194842.111845-4-megous@megous.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Revision 1.2 should be the final production version of the PinePhone.
It has most of the known HW quirks fixed.
Interrupt to the magnetometer is routed correctly, in this revision.
The bulk of the changes are in how modem and the USB-C HDMI bridge
chip is powered and where the signals from the modem are connected.
Also backlight intensity seemingly behaves differently, than on the
1.1 and 1.0 boards, and the PWM duty cycle where backlight starts
to work is 10% (as tested on 2 1.2 PinePhones I have access to).
Signed-off-by: Ondrej Jirman <megous@megous.com>
Link: https://lore.kernel.org/r/20200703194842.111845-3-megous@megous.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The ARM PMU node is described enough with first compatible so remove the
arm,armv8-pmuv3 to fix dtschema warnings like:
arm-pmu: compatible: Additional items are not allowed ('arm,armv8-pmuv3' was unexpected)
arm-pmu: compatible: ['arm,cortex-a57-pmu', 'arm,armv8-pmuv3'] is too long
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Add interrupts property to PWM node on Exynos7 to describe the hardware
fully. No functional change as the interrupts are not used by drivers.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Pinephone has a Goodix GT917S capacitive touchscreen controller on
I2C0 bus. Add support for it.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200702081432.1727696-3-megous@megous.com
[Maxime: Removed the redundant pinctrl nodes]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
PinePhone uses PWM backlight and a XBD599 LCD panel over DSI for
display.
Backlight levels curve was optimized by Martijn Braam using a
lux meter.
Add its device nodes.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200702081432.1727696-2-megous@megous.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Add a simple-mfd representing IMEM on SDM845 and define the PIL
relocation info region, so that post mortem tools will be able to locate
the loaded remoteprocs.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200622191942.255460-6-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add a simple-mfd representing IMEM on QCS404 and define the PIL
relocation info region, so that post mortem tools will be able to locate
the loaded remoteprocs.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200622191942.255460-5-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add OPP tables required to scale DDR/L3 per freq-domain on SC7180 SoCs.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200626190808.8716-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
When starting at 744MHz, the Mali 450 core crashes on S805X based boards:
lima d00c0000.gpu: IRQ ppmmu3 not found
lima d00c0000.gpu: IRQ ppmmu4 not found
lima d00c0000.gpu: IRQ ppmmu5 not found
lima d00c0000.gpu: IRQ ppmmu6 not found
lima d00c0000.gpu: IRQ ppmmu7 not found
Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.2+ #492
Hardware name: Libre Computer AML-S805X-AC (DT)
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : lima_gp_init+0x28/0x188
...
Call trace:
lima_gp_init+0x28/0x188
lima_device_init+0x334/0x534
lima_pdev_probe+0xa4/0xe4
...
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Reverting to a safer 666Mhz frequency on the S805X that doesn't use the
GP0 PLL makes it more stable.
Fixes: fd47716479 ("ARM64: dts: add S805X based P241 board")
Fixes: 0449b8e371 ("arm64: dts: meson: add libretech aml-s805x-ac board")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200618132737.14243-1-narmstrong@baylibre.com
The peripheral clock of the RNG is missing for gxl while it is present
for gxbb.
Fixes: 1b3f6d1486 ("ARM64: dts: meson-gx: add clock CLKID_RNG0 to hwrng node")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200617125346.1163527-1-jbrunet@baylibre.com
The HiHope RZ/G2N variants are advertised as compatible with panel
idk-1110wr from Advantech, however the panel isn't sold alongside the
board. New dts's, enabling the lvds node to get the panel to work with
all the HiHope RZ/G2N variants.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-12-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for HiHope RZ/G2N Rev.3.0/4.0 main board support based on
r8a774b1 SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-10-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Separate out LVDS specific nodes into common file
hihope-rzg2-ex-lvds.dtsi so that this can be re-used by RZ/G2M[N]
variants.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for HiHope RZ/G2M Rev.3.0/4.0 main board support based on
r8a774a1 SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-6-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Rev.3.0 and Rev.4.0 are identical and can be identified by using GP5_19
and GP5_21.
Rev GP5_19 GP5_21
==============================
Rev.3.0 0 0
Rev.4.0 0 1
This patch creates hihope-rev4.dtsi file with
Rev.3.0/4.0 specific changes for HopeRun HiHope RZ/G2M[N] boards.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-5-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Separate out Rev.2.0 specific hardware changes into hihope-rev2.dtsi
file so that hihope-common.dtsi can be used by all the variants for
RZ/G2M[N] boards.
LED node names have been updated according to Rev.4.0 schematics.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The existing DTS files for HiHope RZ/G2N boards are for Rev.2.0 version
so reflect the same for the DTS file names so that the existing naming
convention can be used for Rev.3.0/4.0 boards.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The existing DTS files for HiHope RZ/G2M boards are for Rev.2.0 version
so reflect the same for the DTS file names so that the existing naming
convention can be used for Rev.3.0/4.0 boards.
While at it also added a comment about switch SW43 to be OFF for pciec1
to be activated.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1593004330-5039-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add properties required for the bootloader to select
the correct bootloader blob. They have been removed from
the SoC device tree as they should be set on a per-device
basis.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200623224813.297077-11-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add PSCI node to enable multi-processor startup.
Note that not every 8994 device firmware supports PSCI,
and even if, then it can only start the cores and not
shut them down.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200623224813.297077-10-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add support for I2C and SPI buses to enable peripherals
such as touchscreens or sensors. Also add DMA nodes,
configuration and BLSP2 UART2 interface.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200623224813.297077-8-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Following changes have been made:
- remove name, compatible and msm-id
- wrap clocks in clocks{}
- order nodes by name and by address
- clock_gcc -> gcc
- msmgpio -> tlmm
- qcom,smem -> smem
- remove unit-address from smem
- retire msm8994-pins.dtsi
- add some of the missing pins
- make comments C-style
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200623224813.297077-2-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add remoteproc nodes for the audio, compute and sensor cores, define
glink for each one and enable them on the MTP with appropriate firmware
defined.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200622222747.717306-6-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
SMP2P is used for interrupting and being interrupted about remoteproc
state changes related to the audio, compute and sensor subsystems.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200622222747.717306-5-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
PM8150 ldo11 on the MTP is wired to VDD_SSC_CX and controlled in levels,
rather than as a regulator. As such it's available from the rpmhpd as
the SM8250_LCX power domain.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Fixes: ec13d5c23a ("arm64: dts: qcom: sm8250-mtp: Add pm8150, pm8150l and pm8009")
Link: https://lore.kernel.org/r/20200622222747.717306-2-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The new json-schema based validation tools require SD/MMC controller
nodes to be named mmc. Rename all references to them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory node requires a unit-address. For some boards the bootloader,
which is usually locked down, uses a hard-coded name for the memory node
without a unit-address, so we can't fix it on those boards.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The I/O and PLL supplies used for HDMI/DP have alternative names. Use
the names that are given in the hardware documentation for consistency.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The display controller's parent clock depends on the output that's
consuming data from the display controller, so it needs to be specified
as the parent of the corresponding output. The device tree bindings do
specify this, so just correct the existing device trees that get this
wrong.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Interrupt names are used to distinguish between the syncpoint and
general host1x interrupts. Make sure they are available in the DT so
that drivers can use them if necessary.
Signed-off-by: Thierry Reding <treding@nvidia.com>
While the host1x controller found on Tegra132 is the same as on Tegra124
it is good practice to also list a SoC-specific compatible string so any
SoC-specific quirks can be implemented in drivers if necessary.
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Tegra194, all clients of the memory subsystem can generally address
40 bits of system memory. However, bit 39 has special meaning and will
cause the memory controller to reorder sectors for block-linear buffer
formats. This is primarily useful for graphics-related devices.
Use of bit 39 must be controlled on a case-by-case basis. Buffers that
are used with bit 39 set by one device may be used with bit 39 cleared
by other devices.
Care must be taken to allocate buffers at addresses that do not require
bit 39 to be set. This is normally not an issue for system memory since
there are no Tegra-based systems with enough RAM to exhaust the 39-bit
physical address space. However, when a device is behind an IOMMU, such
as the ARM SMMU on Tegra194, the IOMMUs input address space can cause
IOVA allocations to happen in this region. This is for example the case
when an operating system implements a top-down allocation policy for IO
virtual addresses.
To account for this, describe the path that memory accesses take through
the system. Memory clients will send requests to the memory controller,
which forwards bits [38:0] of the address either to the external memory
controller or the SMMU, depending on the stream ID of the access. A good
way to describe this is using the interconnects bindings, see:
Documentation/devicetree/bindings/interconnect/interconnect.txt
The standard "dma-mem" path is used to describe the path towards system
memory via the memory controller. A dma-ranges property in the memory
controller's device tree node limits the range of DMA addresses that the
memory clients can use to bits [38:0], ensuring that bit 39 is not used.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
Changes in v4:
- add additional entries for interconnect-names to match interconnects
- add EMC as destination for interconnect paths
Changes in v3:
- add missing interconnect properties for VIC
Changes in v2:
- use memory client IDs instead of stream IDs (Mikko Perttunen)
Signed-off-by: Thierry Reding <treding@nvidia.com>
The interface used by clients of the memory controller can be configured
in a number of different ways. Describe this path using the interconnect
bindings to enable the configuration of these parameters.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The SDHCI on Tegra210 is in fact not compatible with the one found on
Tegra124. Remove the extra compatible string to reflect that.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The SDHCI on Tegra194 is in fact not compatible with the one found on
Tegra186. Remove the extra compatible string to reflect that.
Signed-off-by: Thierry Reding <treding@nvidia.com>
PHYs need to have a #phy-cells property that defines how many cells are
required in their specifier. The standard Ethernet PHY doesn't require a
specifier, so set its #phy-cells to 0.
Signed-off-by: Thierry Reding <treding@nvidia.com>
PHYs need to have a #phy-cells property that defines how many cells are
required in their specifier. The standard Ethernet PHY doesn't require
a specifier, so set its #phy-cells to 0.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add ethernet alias, so bootloader code can use this to find the
primary ethernet device, and set the MAC address.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add lsio mu alias for all lsio MUs that could communicate with SCU,
imx_scu_enable_general_irq_channel will parse the alias to get
the mu resource id, if using other MU, not MU1, the `mu_resource_id`
is not what we expect, so add alias to fix this issue.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add device tree support for the Sony Xperia 10 and 10
Plus smartphones. They are all based on the Sony Ganges
platform (sdm630/636) and share a lot of common code.
The differences are really minor, so a Ganges-common DTSI
has been created to reduce clutter.
10 - Kirin
10 Plus - Mermaid
This platform is based on SoMC Nile, but there are some
major differences when it comes to pin configuration and
panel setup (among others).
The boards currently support:
* Screen console
* SDHCI
* I2C
* pstore log dump
* GPIO keys
* PSCI idle states
Signed-off-by: Martin Botka <martin.botka1@gmail.com>
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Tested-by: Martin Botka <martin.botka1@gmail.com>
Link: https://lore.kernel.org/r/20200622192558.152828-7-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add device tree support for the Sony Xperia XA2, XA2 Plus and
XA2 Ultra smartphones. They are all based on the Sony Nile
platform (sdm630) and share a lot of common code. The
differences are really minor, so a Nile-common DTSI
has been created to reduce clutter.
XA2 - Pioneer
XA2 Plus - Voyager
XA2 Ultra - Discovery
The boards currently support:
* Screen console
* SDHCI
* I2C
* pstore log dump
* GPIO keys
* PSCI idle states
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Tested-by: Łukasz Patron <priv.luk@gmail.com>
Link: https://lore.kernel.org/r/20200622192558.152828-6-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add devicetree files for SDM630 SoC and its pin configuration.
This commit adds basic nodes like cpu, psci and other required
configuration for booting up from eMMC to the serial console.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200622192558.152828-5-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add mu node to let A53 could communicate with M Core.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change OCOTP node name from ocotp-ctrl to efuse to be compliant with
yaml schema, it requires the nodename to be one of "eeprom|efuse|nvram".
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to the latest AM65x Data Manual[1], a different output tap
delay value is optimum for a given speed mode. Update these values.
[1] http://www.ti.com/lit/gpn/am6526
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Much like SDM845 each serial engine has 4 pins attached. Add all
possible I2C and SPI nodes for all 20 serial engines.
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200606131300.3874987-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the TLMM pinctrl node for SM8250 and reserve pins 28-31 and 40-43 on
the MTP as firmware does not allow Linux to touch these pins.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200430181716.3797842-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add temperature alarm and thermal zone configuration to all three
pm8150 instances. Configuration is largely based on the msm-4.19 tree.
These alarms use main adc of the pmic. Separate temperature adc is not
supported yet.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200621192824.2069145-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
sm8150 has 27 thermal sensors split across two tsens controllers. Add
the thermal zones to expose them and wireup the cpus to throttle their
frequencies on crossing passive temperature thresholds.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/1cdbebe6f7f69ccd8468a4138b56e8a200289d95.1591684754.git.amit.kucheria@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add nodes for the network-on-chip interconnect buses present on
MSM8916-based platforms.
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Link: https://lore.kernel.org/r/20200617134515.25229-1-georgi.djakov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
apq8016-sbc.dtsi uses spaces on some lines instead of tabs.
Make this consistent by converting them to tabs.
Also remove some redundant comments from the DAI link definitions
- this is already visible from the comment block before the "sound"
node or the device node entries itself.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-4-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.
However, "bias-pull-none" actually does not exist at all - not in
mainline and not in downstream. I can only guess that the original
intention was to configure "no pull", i.e. bias-disable.
Change it to that instead.
Fixes: 143bb9ad85 ("arm64: dts: qcom: add audio pinctrls")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-2-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
As of commit 4ff028f6c1 ("ASoC: qcom: lpass-cpu: Make I2S SD lines
configurable"), lpass now supports children nodes to configure the
MI2S SD lines to use for one of the I2S ports. For example:
lpass@7708000 {
dai@3 {
reg = <MI2S_QUATERNARY>;
qcom,playback-sd-lines = <1>;
};
};
The "reg" property refers to the DAI number in this case,
so we need to set #address-cells and #size-cells appropriately
to avoid DTC warnings.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-1-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
By specifying the modem firmware files, we can boot the modem subsystem
which also gives us wifi.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20200528185341.4891-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The label on the l15 regulator node does not follow the style of the
rest of the regulator nodes. Luckily, no one has used the label yet,
so lets fix it.
Fixes: 2c6d2d3a58 ("arm64: dts: qcom: Add Lenovo Miix 630")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20200528145135.44269-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The label on the l15 regulator node does not follow the style of the
rest of the regulator nodes. Luckily, no one has used the label yet,
so lets fix it.
Fixes: 31c1f0e33d ("arm64: dts: qcom: msm8998: Add RPM and regulators for MTP")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20200528144814.44143-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The modem node has an address of 4080000 and thus should come after tlmm
and before gpu. Move the node to the right place to maintainer proper
address sort order.
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Sibi Sankar <sibis@codeaurora.org>
Fixes: e14a15eba8 ("arm64: dts: qcom: sc7180: Add Q6V5 MSS node")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200521010337.229177-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The ufs-qcom driver checks that the name matches the androidboot.bootdevice
parameter provided by the bootloader, which uses the name ufshc. Without
this change UFS fails to probe.
I think this is broken behavior from the ufs-qcom driver, but using the
name ufshc is consistent with dts for sdm845/sm8150/etc.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200523175232.13721-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The pm8150 dtsi files refer to it as spmi_bus, so change it.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200523132104.31046-1-jonathan@marek.ca
[bjorn: Dropped qcom, from node name while we're poking at it]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
LDO1 and LDO2 settings are wrong and case the voltage to go above the
maximum level of 2.15V permitted by the SoC to 3.0V.
This patch is based on work done on the i.MX8M Mini-EVK which utilizes
the same fix.
Fixes: 593816fa2f ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There are 2 thermal zones in ls1028a soc. Current dts only
includes one. This patch adds the other thermal zone node
in dts to enable it.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Correct ldo1 voltage range from wrong high group(3.0V~3.3V) to low group
(1.6V~1.9V) because the ldo1 should be 1.8V. Actually, two voltage groups
have been supported at bd718x7-regulator driver, hence, just corrrect the
voltage range to 1.6V~3.3V. For ldo2@0.8V, correct voltage range too.
Otherwise, ldo1 would be kept @3.0V and ldo2@0.9V which violate i.mx8mn
datasheet as the below warning log in kernel:
[ 0.995524] LDO1: Bringing 1800000uV into 3000000-3000000uV
[ 0.999196] LDO2: Bringing 800000uV into 900000-900000uV
Fixes: 3e44dd0973 ("arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support")
Cc: stable@vger.kernel.org
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Correct ldo1 voltage range from wrong high group(3.0V~3.3V) to low group
(1.6V~1.9V) because the ldo1 should be 1.8V. Actually, two voltage groups
have been supported at bd718x7-regulator driver, hence, just corrrect the
voltage range to 1.6V~3.3V. For ldo2@0.8V, correct voltage range too.
Otherwise, ldo1 would be kept @3.0V and ldo2@0.9V which violate i.mx8mm
datasheet as the below warning log in kernel:
[ 0.995524] LDO1: Bringing 1800000uV into 3000000-3000000uV
[ 0.999196] LDO2: Bringing 800000uV into 900000-900000uV
Fixes: 78cc25fa26 ("arm64: dts: imx8mm-evk: Add BD71847 PMIC")
Cc: stable@vger.kernel.org
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The devices could be enumerated properly with aliases.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add ethernet alias, so bootloader code can use this to find the
primary ethernet device, and set the MAC address.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Current dts files with 'gpio-led' nodes were manually verified.
In order to automate this process leds-gpio.txt
has been converted to yaml. With this conversion a check
for pattern properties was added. In part 2 rename and label
gpio-led subnodes that passed the regex, but still don't have
the preferred form. Any pin subnode that ends with '-gpio'
in the pinctrl node generates a warning.
Fix with help of the following rules:
1: Add nodename in the preferred form.
2: Always add a label that ends with '_led' to prevent conflicts
with other labels such as 'power' and 'mmc'
3: If leds need pinctrl add a label that ends with '_led_pin'
also to prevent conflicts with other labels.
patternProperties:
# The first form is preferred, but fall back to just 'led'
# anywhere in the node name to at least catch some child nodes.
"(^led-[0-9a-f]$|led)":
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/
leds-gpio.yaml
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/
schemas/gpio/gpio.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200522154657.9472-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml:
tsadc: tsadc-otp-gpio:
{'phandle': [[90]], 'rockchip,pins': [[0, 6, 0, 123]]}
is not of type 'array'
'gpio' is a sort of reserved nodename and should not be used
for pinctrl in combination with 'rockchip,pins', so change
nodes that end with 'gpio' to end with 'pin' or 'pins'.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/
dtschema/schemas/gpio/gpio.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200524160636.16547-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The puma gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on the kernel side this works ok, other DT users may get
confused - as seen with uboot right now.
So bring this in line and make both properties match, similar to the
other Rockchip board.
Fixes: 2c66fc34e9 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20200603132836.362519-1-heiko@sntech.de
The puma vcc5v0_host regulator node currently uses opposite active-values
for the enable pin. The gpio-declaration uses active-high while the
separate enable-active-low property marks the pin as active low.
While on the kernel side this works ok, other DT users may get
confused - as seen with uboot right now.
So bring this in line and make both properties match, similar to the
gmac fix.
Fixes: 2c66fc34e9 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20200604091239.424318-1-heiko@sntech.de
The lion gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on the kernel side this works ok, other DT users may get
confused - as seen with uboot right now.
So bring this in line and make both properties match, similar to the
other Rockchip board.
Fixes: d99a02bcfa ("arm64: dts: rockchip: add RK3368-uQ7 (Lion) SoM")
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20200607212909.920575-1-heiko@sntech.de
The usb-c port on the rockpro64 does not detect devices reliably when in otg mode.
Setting the mode to "host" allows the port to work reliably.
This aligns with the pinebook-pro configuration.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20200614142950.1120694-1-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the i.MX8MQ VPU module which comprises Hantro G1 and G2 video
decoder cores and a reset/control block.
Hook up the bus clock to the VPU power domain to enable handshakes, and
configure the core clocks to 600 MHz and the bus clock to 800 MHz by
default.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add pwr and status leds configuration and turn on pwr led by default for Orange
Pi Zero Plus 2 (both H3 and H5 variants).
Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
Link: https://lore.kernel.org/r/20200615130223.34464-2-diego.rondini@kynetics.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Enable support for USB OTG port on Orange Pi Zero Plus 2 (both H3 and H5
variants). As, according to the board schematics, the USB OTG port cannot
provide power to external devices, we set dr_mode to peripheral.
Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
Link: https://lore.kernel.org/r/20200615130223.34464-1-diego.rondini@kynetics.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Add UFS and UFS-PHY device nods to Exynos7 SoC and Espresso board.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Including:
- A big part of this is a change in how devices get connected to
IOMMUs in the core code. It contains the change from the old
add_device()/remove_device() to the new
probe_device()/release_device() call-backs. As a result
functionality that was previously in the IOMMU drivers has
been moved to the IOMMU core code, including IOMMU group
allocation for each device.
The reason for this change was to get more robust allocation
of default domains for the iommu groups.
A couple of fixes were necessary after this was merged into
the IOMMU tree, but there are no known bugs left. The last fix
is applied on-top of the merge commit for the topic branches.
- Removal of the driver private domain handling in the Intel
VT-d driver. This was fragile code and I am glad it is gone
now.
- More Intel VT-d updates from Lu Baolu:
- Nested Shared Virtual Addressing (SVA) support to the
Intel VT-d driver
- Replacement of the Intel SVM interfaces to the common
IOMMU SVA API
- SVA Page Request draining support
- ARM-SMMU Updates from Will:
- Avoid mapping reserved MMIO space on SMMUv3, so that
it can be claimed by the PMU driver
- Use xarray to manage ASIDs on SMMUv3
- Reword confusing shutdown message
- DT compatible string updates
- Allow implementations to override the default domain
type
- A new IOMMU driver for the Allwinner Sun50i platform
- Support for ATS gets disabled for untrusted devices (like
Thunderbolt devices). This includes a PCI patch, acked by
Bjorn.
- Some cleanups to the AMD IOMMU driver to make more use of
IOMMU core features.
- Unification of some printk formats in the Intel and AMD IOMMU
drivers and in the IOVA code.
- Updates for DT bindings
- A number of smaller fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=a4z4
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"A big part of this is a change in how devices get connected to IOMMUs
in the core code. It contains the change from the old add_device() /
remove_device() to the new probe_device() / release_device()
call-backs.
As a result functionality that was previously in the IOMMU drivers has
been moved to the IOMMU core code, including IOMMU group allocation
for each device. The reason for this change was to get more robust
allocation of default domains for the iommu groups.
A couple of fixes were necessary after this was merged into the IOMMU
tree, but there are no known bugs left. The last fix is applied on-top
of the merge commit for the topic branches.
Other than that change, we have:
- Removal of the driver private domain handling in the Intel VT-d
driver. This was fragile code and I am glad it is gone now.
- More Intel VT-d updates from Lu Baolu:
- Nested Shared Virtual Addressing (SVA) support to the Intel VT-d
driver
- Replacement of the Intel SVM interfaces to the common IOMMU SVA
API
- SVA Page Request draining support
- ARM-SMMU Updates from Will:
- Avoid mapping reserved MMIO space on SMMUv3, so that it can be
claimed by the PMU driver
- Use xarray to manage ASIDs on SMMUv3
- Reword confusing shutdown message
- DT compatible string updates
- Allow implementations to override the default domain type
- A new IOMMU driver for the Allwinner Sun50i platform
- Support for ATS gets disabled for untrusted devices (like
Thunderbolt devices). This includes a PCI patch, acked by Bjorn.
- Some cleanups to the AMD IOMMU driver to make more use of IOMMU
core features.
- Unification of some printk formats in the Intel and AMD IOMMU
drivers and in the IOVA code.
- Updates for DT bindings
- A number of smaller fixes and cleanups.
* tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (109 commits)
iommu: Check for deferred attach in iommu_group_do_dma_attach()
iommu/amd: Remove redundant devid checks
iommu/amd: Store dev_data as device iommu private data
iommu/amd: Merge private header files
iommu/amd: Remove PD_DMA_OPS_MASK
iommu/amd: Consolidate domain allocation/freeing
iommu/amd: Free page-table in protection_domain_free()
iommu/amd: Allocate page-table in protection_domain_init()
iommu/amd: Let free_pagetable() not rely on domain->pt_root
iommu/amd: Unexport get_dev_data()
iommu/vt-d: Fix compile warning
iommu/vt-d: Remove real DMA lookup in find_domain
iommu/vt-d: Allocate domain info for real DMA sub-devices
iommu/vt-d: Only clear real DMA device's context entries
iommu: Remove iommu_sva_ops::mm_exit()
uacce: Remove mm_exit() op
iommu/sun50i: Constify sun50i_iommu_ops
iommu/hyper-v: Constify hyperv_ir_domain_ops
iommu/vt-d: Use pci_ats_supported()
iommu/arm-smmu-v3: Use pci_ats_supported()
...
Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzkHw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yldOwCgus/DgpnI1UL4z+NdBxJrAXtkPmgAn2sgTUea
i5RblCmcVMqvHaGtYkY+
=tScN
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
habanalabs: correctly cast u64 to void*
habanalabs: initialize variable to default value
extcon: arizona: Fix runtime PM imbalance on error
extcon: max14577: Add proper dt-compatible strings
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
extcon: remove redundant assignment to variable idx
w1: omap-hdq: print dev_err if irq flags are not cleared
w1: omap-hdq: fix interrupt handling which did show spurious timeouts
w1: omap-hdq: fix return value to be -1 if there is a timeout
w1: omap-hdq: cleanup to add missing newline for some dev_dbg
/dev/mem: Revoke mappings when a driver claims the region
misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
nvmem: qfprom: remove incorrect write support
habanalabs: handle MMU cache invalidation timeout
habanalabs: don't allow hard reset with open processes
habanalabs: GAUDI does not support soft-reset
habanalabs: add print for soft reset due to event
habanalabs: improve MMU cache invalidation code
...
Here are the large set of USB and PHY driver updates for 5.8-rc1.
Nothing huge, just lots of little things:
- USB gadget fixes and additions all over the place
- new PHY drivers
- PHY driver fixes and updates
- XHCI driver updates
- musb driver updates
- more USB-serial driver ids added
- various USB quirks added
- thunderbolt minor updates and fixes
- typec updates and additions
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzqVA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynftwCfeanyI6TR5AdfJVZN50B6/ySvVwcAn07i9VRX
tnt2kz0UqReYpLt0wyJ7
=YP7o
-----END PGP SIGNATURE-----
Merge tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY driver updates from Greg KH:
"Here are the large set of USB and PHY driver updates for 5.8-rc1.
Nothing huge, just lots of little things:
- USB gadget fixes and additions all over the place
- new PHY drivers
- PHY driver fixes and updates
- XHCI driver updates
- musb driver updates
- more USB-serial driver ids added
- various USB quirks added
- thunderbolt minor updates and fixes
- typec updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits)
usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs
usb: dwc3: meson-g12a: fix error path when fetching the reset line fails
Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings"
Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180"
Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver"
USB: serial: ch341: fix lockup of devices with limited prescaler
USB: serial: ch341: add basis for quirk detection
CDC-ACM: heed quirk also in error handling
USB: serial: option: add Telit LE910C1-EUX compositions
usb: musb: Fix runtime PM imbalance on error
usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
usb: musb: use true for 'use_dma'
usb: musb: start session in resume for host port
usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
USB: serial: qcserial: add DW5816e QDL support
thunderbolt: Add trivial .shutdown
usb: dwc3: keystone: Turn on USB3 PHY before controller
dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
dt-bindings: usb: convert keystone-usb.txt to YAML
...
This is the set of device tree changes, mostly covering new
hardware support, with 577 patches touching a little over 500
files.
There are five new Arm SoCs supported in this release, all of
them for existing SoC families:
- Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in
both NAS devices and Android Set-top-box designs, along
with the "Horseradish", "Lion Skin" and "Mjolnir" reference
platforms; the Mele X1000 and Xnano X5 set-top-boxes and
the Banana Pi BPi-M4 single-board computer.
- Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC
and the iW-RainboW-G21D-Qseven-RZG1H board/SoM
- Rockchips RK3326 -- low-end 64-bit SoC along with the
Odroid-GO Advance game console
Newly added machines on already supported SoCs are:
- AMLogic S905D based Smartlabs SML-5442TW TV box
- AMLogic S905X3 based ODROID-C4 SBC
- AMLogic S922XH based Beelink GT-King Pro TV box
- Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC
- Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2"
and YADRO OpenPower P9 "Nicole"
- Marvell Kirkwood based Check Point L-50 router
- Mediatek MT8173 based Elm/Hana Chromebook laptops
- Microchip SAMA5D2 "Industrial Connectivity Platform"
reference board
- NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit
- Octavo OSDMP15x based Linux Automation MC-1 development board
- Qualcomm SDM630 based Xiaomi Redmi Note 7 phone
- Realtek RTD1295 based Xnano X5 TV Box
- STMicroelectronics STM32MP1 based Stinger96 single-board
computer and IoT Box
- Samsung Exynos4210 based based Samsung Galaxy S2 phone
- Socionext Uniphier based Akebi96 SBC
- TI Keystone based K2G Evaluation board
- TI am5729 based Beaglebone-AI development board
Include device descriptions for additional hardware support in existing
SoCs and machines based on all major SoC platforms:
- AMlogic Meson
- Allwinner sunxi
- Arm Juno/VFP/Vexpress/Integrator
- Broadcom bcm283x/bcm2711
- Hisilicon hi6220
- Marvell EBU
- Mediatek MT27xx, MT76xx, MT81xx and MT67xx
- Microchip SAMA5D2
- NXP i.MX6/i.MX7/i.MX8 and Layerscape
- Nvidia Tegra
- Qualcomm Snapdragon
- Renesas r8a77961, r8a7791
- Rockchips RK32xx/RK33xx
- ST-Ericsson ux500
- STMicroelectronics SMT32
- Samsung Exynos and S5PV210
- Socionext Uniphier
- TI OMAP5/DRA7 and Keystone
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=17kt
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"This is the set of device tree changes, mostly covering new hardware
support, with 577 patches touching a little over 500 files.
There are five new Arm SoCs supported in this release, all of them for
existing SoC families:
- Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS
devices and Android Set-top-box designs, along with the
"Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the
Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4
single-board computer.
- Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and
the iW-RainboW-G21D-Qseven-RZG1H board/SoM
- Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO
Advance game console
Newly added machines on already supported SoCs are:
- AMLogic S905D based Smartlabs SML-5442TW TV box
- AMLogic S905X3 based ODROID-C4 SBC
- AMLogic S922XH based Beelink GT-King Pro TV box
- Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC
- Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO
OpenPower P9 "Nicole"
- Marvell Kirkwood based Check Point L-50 router
- Mediatek MT8173 based Elm/Hana Chromebook laptops
- Microchip SAMA5D2 "Industrial Connectivity Platform" reference
board
- NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit
- Octavo OSDMP15x based Linux Automation MC-1 development board
- Qualcomm SDM630 based Xiaomi Redmi Note 7 phone
- Realtek RTD1295 based Xnano X5 TV Box
- STMicroelectronics STM32MP1 based Stinger96 single-board computer
and IoT Box
- Samsung Exynos4210 based based Samsung Galaxy S2 phone
- Socionext Uniphier based Akebi96 SBC
- TI Keystone based K2G Evaluation board
- TI am5729 based Beaglebone-AI development board
Include device descriptions for additional hardware support in
existing SoCs and machines based on all major SoC platforms:
- AMlogic Meson
- Allwinner sunxi
- Arm Juno/VFP/Vexpress/Integrator
- Broadcom bcm283x/bcm2711
- Hisilicon hi6220
- Marvell EBU
- Mediatek MT27xx, MT76xx, MT81xx and MT67xx
- Microchip SAMA5D2
- NXP i.MX6/i.MX7/i.MX8 and Layerscape
- Nvidia Tegra
- Qualcomm Snapdragon
- Renesas r8a77961, r8a7791
- Rockchips RK32xx/RK33xx
- ST-Ericsson ux500
- STMicroelectronics SMT32
- Samsung Exynos and S5PV210
- Socionext Uniphier
- TI OMAP5/DRA7 and Keystone"
* tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits)
ARM: dts: keystone: Rename "msmram" node to "sram"
arm: dts: mt2712: add uart APDMA to device tree
arm64: dts: mt8183: add mmc node
arm64: dts: mt2712: add ethernet device node
arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1
ARM: dts: mmp3: Add the fifth SD HCI
ARM: dts: berlin*: Fix up the SDHCI node names
ARM: dts: mmp3: Fix USB & USB PHY node names
ARM: dts: mmp3: Fix L2 cache controller node name
ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property
ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property
ARM: dts: pxa910: Fix the gpio interrupt cell number
ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property
ARM: dts: pxa168: Fix the gpio interrupt cell number
ARM: dts: pxa168: Add missing address/size cells to i2c nodes
ARM: dts: dove: Fix interrupt controller node name
ARM: dts: kirkwood: Fix interrupt controller node name
arm64: dts: Add SC9863A emmc and sd card nodes
arm64: dts: Add SC9863A clock nodes
arm64: dts: mt6358: add PMIC MT6358 related nodes
...
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
- New support of Beacon i.MX8m-Mini development kit.
- Add secondary cpus supply on imx8mm-evk and imx8mn-ddr4-evk for
completeness.
- Add thermal zones for imx8mp and lx2160a, PMIC thermal zone for
imx8qxp-mek board.
- Update VDD_ARM 1.2GHz setpoint voltage for imx8mn.
- Add SRC device interrupt for i.MX8 SoCs.
- Use 0.9V for VDD_GPU on imx8mq-librem5-devkit, since there is no need
to support overclocking to 1GHz.
- Update imx8qxp SCU device to use MU channel with less interrupt
triggering, one RX interrupt for a RX and one TX interrupt for a TX.
- Specify DMA channels for LS1028A DSPI controllers.
- Add QE and DS26522 device support for fsl-ls1043a-rdb board.
- Misc random update and cleanup.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl7IjXEUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5wlAf/YBbXQ/9lXCxicQdS3Qkos9It3e2c
DXcO44vJjPJoK4NMelj1ULTnLAtG18zwwZOloBM+/TynMDkzZpEHUd0TJte94uIH
YUhMnGD+YQ1DniJKAFcfMdwpMsXPtz2bSGcaPtohxa2q0yYF7c0w1HfURtMtKAn5
UgxNJr0SBWzhCp8ErZxQgi91UBORgUKQNHg+ea7Z6lvIdTBM42gh24O2GMxMTJEq
72uveOw9+GgpTq4Yy6/W4jmtBekgyOB1JDDHlt0ecHiYPs6qKPc9rVRNMB2REEEv
kGgy6x2MR6jEMKnQkRKsyhzin3XdZiwGjVVWn7zz1BzPLC8CvyTKImyLUw==
=5yI8
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree changes:
- New support of Beacon i.MX8m-Mini development kit.
- Add secondary cpus supply on imx8mm-evk and imx8mn-ddr4-evk for
completeness.
- Add thermal zones for imx8mp and lx2160a, PMIC thermal zone for
imx8qxp-mek board.
- Update VDD_ARM 1.2GHz setpoint voltage for imx8mn.
- Add SRC device interrupt for i.MX8 SoCs.
- Use 0.9V for VDD_GPU on imx8mq-librem5-devkit, since there is no need
to support overclocking to 1GHz.
- Update imx8qxp SCU device to use MU channel with less interrupt
triggering, one RX interrupt for a RX and one TX interrupt for a TX.
- Specify DMA channels for LS1028A DSPI controllers.
- Add QE and DS26522 device support for fsl-ls1043a-rdb board.
- Misc random update and cleanup.
* tag 'imx-dt64-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (25 commits)
arm64: dts: Add ds26522 node to dts to ls1043ardb
arm64: dts: add qe node to ls1043ardb
arm64: dts: ls1028a: sl28: keep switch port names consistent
arm64: dts: imx8mp: Add src node interrupts
arm64: dts: imx8mq: Add src node interrupts
arm64: dts: imx8m: assign clocks for A53
arm64: dts: freescale: sl28: enable LPUART1
arm64: dts: ls1043a-rdb: add compatible for board
arm64: dts: imx8mp: add "fsl,imx6sx-fec" compatible string
arm64: dts: imx8qxp-mek: Do not use underscore in node name
arm64: dts: fsl: add fsl,extts-fifo property for fman ptp
arm64: dts: imx8mn: Update VDD_ARM 1.2GHz setpoint voltage
arm64: dts: lx2160a: add more thermal zone support
arm64: dts: imx8qxp-mek: Add PMIC thermal zone support
arm64: dts: imx8qxp-mek: Sort labels alphabetically
arm64: dts: imx8mm: specify #sound-dai-cells for SAI nodes
arm64: dts: imx8qxp: support scu mailbox channel
arm64: dts: imx8mp: Add thermal zones support
arm64: dts: ls1012a: Add QSPI node properties
arm64: dts: imx: Add Beacon i.MX8m-Mini development kit
...
Link: https://lore.kernel.org/r/20200523032516.11016-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a couple of fixes for minor issues, enables XUDC support
on Tegra194, and enables EMC frequency scaling and video capture on
Tegra210.
-----BEGIN PGP SIGNATURE-----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=A/Pb
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.8-arm64-dt-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.8-rc1
This contains a couple of fixes for minor issues, enables XUDC support
on Tegra194, and enables EMC frequency scaling and video capture on
Tegra210.
* tag 'tegra-for-5.8-arm64-dt-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1
arm64: tegra: Make the RTC a wakeup source on Jetson TX2
arm64: tegra: Enable VI I2C on Jetson Nano
arm64: tegra: Fix flag for 64-bit resources in 'ranges' property
arm64: tegra: Add Tegra VI CSI support in device tree
arm64: tegra: Add reset-cells to memory controller
arm64: tegra: Fix SOR powergate clocks and reset
arm64: tegra: Allow the PMIC RTC to wakeup Jetson Xavier
arm64: tegra: Fix ethernet phy-mode for Jetson Xavier
arm64: tegra: Hook up EMC cooling device
arm64: tegra: Add external memory controller node for Tegra210
arm64: tegra: Add XUDC node on Tegra194
arm64: tegra: Kill off "simple-panel" compatibles
Link: https://lore.kernel.org/r/20200522142846.2376224-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Highlights:
- new boards :Beelink GT-King Pro (G12B SoC), Smartlabs SML-5442TW
(S905D), Hardkernel ODROID-C4 (SM1)
- audio: support for GX-family SoCs
- audio: internal DAC support
- use the new USB control driver for GXL and GXM
-----BEGIN PGP SIGNATURE-----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=JbXj
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: Amlogic updates for v5.8
Highlights:
- new boards :Beelink GT-King Pro (G12B SoC), Smartlabs SML-5442TW
(S905D), Hardkernel ODROID-C4 (SM1)
- audio: support for GX-family SoCs
- audio: internal DAC support
- use the new USB control driver for GXL and GXM
* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (33 commits)
arm64: dts: meson-g12b-gtking-pro: add initial device-tree
dt-bindings: arm: amlogic: add support for the Beelink GT-King Pro
arm64: dts: meson-g12b-gtking: add initial device-tree
dt-bindings: arm: amlogic: add support for the Beelink GT-King
arm64: dts: meson: convert ugoos-am6 to common w400 dtsi
arm64: dts: meson: add ethernet interrupt to wetek dtsi
arm64: dts: meson: add support for the Smartlabs SML-5442TW
dt-bindings: arm: amlogic: add support for the Smartlabs SML-5442TW
dt-bindings: add vendor prefix for Smartlabs LLC
arm64: dts: meson: g12: add internal DAC glue
arm64: dts: meson: g12: add internal DAC
arm64: dts: meson: libretech-pc: add internal DAC support
arm64: dts: meson: libretech-ac: add internal DAC support
arm64: dts: meson: libretech-cc: add internal DAC support
arm64: dts: meson: p230-q200: add internal DAC support
arm64: dts: meson: gxl: add acodec support
arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4
dt-bindings: arm: amlogic: add odroid-c4 bindings
arm64: dts: meson-sm1: add cpu thermal nodes
arm64: dts: meson-g12b: move G12B thermal nodes to meson-g12b.dtsi
...
Link: https://lore.kernel.org/r/5ec6f56a.1c69fb81.fc5d5.9ca6@mx.google.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rather busy cycle. We have a total 99 non-merge commits going into v5.8
merge window. The majority of the changes are in dwc3 this around (31.7%
of all changes). It's composed mostly Thinh's recent updates to get dwc3
to behave correctly with stream transfers. We have also have Roger's for
Keystone platforms and Neil's updates for the meson glue layer.
Apart from those, we have the usual set of non-critical fixes, new
device IDs, spelling fixes all over the place.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
-----BEGIN PGP SIGNATURE-----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=OiS0
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
USB: changes for v5.8 merge window
Rather busy cycle. We have a total 99 non-merge commits going into v5.8
merge window. The majority of the changes are in dwc3 this around (31.7%
of all changes). It's composed mostly Thinh's recent updates to get dwc3
to behave correctly with stream transfers. We have also have Roger's for
Keystone platforms and Neil's updates for the meson glue layer.
Apart from those, we have the usual set of non-critical fixes, new
device IDs, spelling fixes all over the place.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
* tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (99 commits)
usb: dwc3: keystone: Turn on USB3 PHY before controller
dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
dt-bindings: usb: convert keystone-usb.txt to YAML
usb: dwc3: gadget: Check for prepared TRBs
usb: gadget: Fix issue with config_ep_by_speed function
usb: cdns3: ep0: delete the redundant status stage
usb: dwc2: Update Core Reset programming flow.
usb: gadget: fsl: Fix a wrong judgment in fsl_udc_probe()
usb: gadget: fix potential double-free in m66592_probe.
usb: cdns3: Fix runtime PM imbalance on error
usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check
usb: dwc3: Increase timeout for CmdAct cleared by device controller
USB: dummy-hcd: use configurable endpoint naming scheme
usb: cdns3: gadget: assign interrupt number to USB gadget structure
usb: gadget: core: sync interrupt before unbind the udc
arm64: dts: qcom: sc7180: Add interconnect properties for USB
arm64: dts: qcom: sdm845: Add interconnect properties for USB
dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
ARM: dts: at91: Remove the USB EP child node
dt-bindings: usb: atmel: Mark EP child node as deprecated
...
Populate USB DT nodes with interconnect properties.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Populate USB DT nodes with interconnect properties.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Add the correcly architectured USB Glue node and adapt all the Amlogic
GXL and GXM board to the new organization.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
The MSCC bug fix in 'net' had to be slightly adjusted because the
register accesses are done slightly differently in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
Add remaining properties to the ethernet node and enable it.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Setup the pin control for the Ethernet MAC.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the ethernet0 alias for ethernet so that u-boot can find this node
and fill in the MAC address.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the Ethernet MAC node to mt8516.dtsi. This defines parameters common
to all the boards based on this SoC.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for the PERICFG register range as a syscon. This will
soon be used by the MediaTek Ethernet MAC driver for NIC configuration.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RTC found on the MAX77620 PMIC can be used as a wakeup source on
Jetson Nano and TX1, which is useful to wake the system from suspend
at a given time.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
display controller and a new board using it, the Odroid Advance Go.
sdcard regulator for the rockpro64 and a lot of devicetree fixes
making the dt-binding check a lot happier.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl7F1N0QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgV34CAChtYhGGRGEr8WwGL3WG1f8z1nwEfxEGaMx
niLnchgR2kWRiPFV8SVHaNkcGj9+VkeA/F8mCrrKiPDPrsL+s5X6q2liAmEGnIWo
OvlfyuIJNaSjnVxwhdZABIQsjjeLZI2i0OWGmq47vGopWaNWDGW9wrPlRslPrf4N
AIww1TwjKYK8Et5ja3COwfSt1gn2/PwR09wTfQwCy7wi9At6UWOQsDmpyFbjuTgv
GmPcQJZa2YtQovSM5FrbhguCKSGFSukopqqrrxmfsvlkz+xmZyeHN6MMpdNnwBXe
Kf3VU2p6b+75YouuOcJAAueBj6b37/tvi7KK/MZszdG2pM85SL1z
=BL2H
-----END PGP SIGNATURE-----
Merge tag 'v5.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New soc variant the rk3326 which is essentially a px30 with only one
display controller and a new board using it, the Odroid Advance Go.
sdcard regulator for the rockpro64 and a lot of devicetree fixes
making the dt-binding check a lot happier.
* tag 'v5.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (22 commits)
arm64: dts: rockchip: fix pinctrl-names for gpio-leds node on rk3326-odroid-go2
arm64: dts: rockchip: fix pd_tcpc0 and pd_tcpc1 node position on rk3399
arm64: dts: rockchip: add bus-width properties to mmc nodes for px30
arm64: dts: rockchip: remove disable-wp from rk3308-roc-cc emmc node
arm64: dts: rockchip: rename and label gpio-led subnodes
arm64: dts: rockchip: fix defines in pd_vio node for rk3399
arm64: dts: rockchip: fix &pinctrl phy sub nodename for rk3399-orangepi
arm64: dts: rockchip: fix rtl8211e nodename for rk3399-orangepi
arm64: dts: rockchip: fix &pinctrl phy sub nodename for rk3399-nanopi4
arm64: dts: rockchip: fix rtl8211e nodename for rk3399-nanopi4
arm64: dts: rockchip: fix rtl8211f nodename for rk3328 Beelink A1
arm64: dts: rockchip: fix phy nodename for rk3328
include: dt-bindings: rockchip: remove unused defines
arm64: dts: rockchip: replace RK_FUNC defines in rk3326-odroid-go2
arm64: dts: rockchip: Define the rockchip Video Decoder node on rk3399
arm64: dts: rockchip: remove #sound-dai-cells from &spdif node of rk3399-hugsun-x99.dts
arm64: dts: rockchip: remove #sound-dai-cells from &i2s1 node of rk3399-pinebook-pro.dts
arm64: dts: rockchip: add Odroid Advance Go
dt-bindings: Add binding for Hardkernel Odroid Go Advance
arm64: dts: rockchip: add core devicetree for rk3326
...
Link: https://lore.kernel.org/r/1970481.V9vR1fIhX2@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Various miscellaneous device tree source fixes to make them fully
binding compliant. It includes fixing various device node names,
order of interrupt properties, compatible names, address and size
cell fields and their aligment with children nodes as well as
moving some fixed devices out of bus node.
-----BEGIN PGP SIGNATURE-----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=Z5QL
-----END PGP SIGNATURE-----
Merge tag 'juno-updates-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt
ARMv8 Juno/Vexpress/Fast Models updates for v5.8
Various miscellaneous device tree source fixes to make them fully
binding compliant. It includes fixing various device node names,
order of interrupt properties, compatible names, address and size
cell fields and their aligment with children nodes as well as
moving some fixed devices out of bus node.
* tag 'juno-updates-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Fix SCPI shared mem node name
arm64: dts: vexpress: Fix VExpress LED names
arm64: dts: juno: Fix GPU interrupt order
arm64: dts: fvp/juno: Fix bus node names
arm64: dts: fvp: Fix SMMU DT node
arm64: dts: fvp/juno: Fix serial node names
arm64: dts: juno: Use proper DT node name for USB
arm64: dts: fvp: Fix ITS node names and #msi-cells
arm64: dts: fvp: Fix GIC child nodes
arm64: dts: juno: Fix GIC child nodes
arm64: dts: fvp: Fix GIC compatible names
arm64: dts: juno: Fix mem-timer
arm64: dts: juno: Move fixed devices out of bus node
arm64: dts: fvp: Move fixed clocks out of bus node
arm64: dts: vexpress: Move fixed devices out of bus node
arm64: dts: fvp: Move fixed devices out of bus node
arm64: dts: fvp/juno: Fix node address fields
Link: https://lore.kernel.org/r/20200519094702.GA32975@bogus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For SDM845 this defines the IPA network accelerator and the CCI camera
control bus, it defines the required UFS reset and adds WiFi for the
Lenovo Yoga C630 and defines GPIO pin names and adds OV8856 and OC7251
camera nodes for DB845c.
For SC7180 it adds GPU support, defines the modem remoteproc, adds the
IPA network accelerator, Coresight and ETM support, adds cpuidle low
power states and updates the CPUs' compatible.
For SM8250 it adds regulators from the PM8150, PM8150L and PM8009 and
adds voltage corners, it defines the nodes for UFS PHY and controller
and finally corrects a typo in the PDC node to make SPMI functional.
For MSM8916 I2C1 and I2C5 are defined, a node for the CCI camera control
interface bus is added and Coresight is disabled by default to match
some product configurations. The Samsung A3U gained display support and
Samsung A5U gained touchscreen support.
MSM8996 now property describes the power supply chain for the GPU, the
CCI camera control interface bus is added and the DB820c has the
regulators of the secondary PMIC defined.
For QCS404 USB PHYs and controllers are defined and wired up for the
EVB.
SDM630/SDM660 platform support is added and the Xiaomi Redmi Note 7
defined.
It also contains a number of changes throughout to improve DT binding
compliance.
-----BEGIN PGP SIGNATURE-----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=ds6R
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for v5.8
For SDM845 this defines the IPA network accelerator and the CCI camera
control bus, it defines the required UFS reset and adds WiFi for the
Lenovo Yoga C630 and defines GPIO pin names and adds OV8856 and OC7251
camera nodes for DB845c.
For SC7180 it adds GPU support, defines the modem remoteproc, adds the
IPA network accelerator, Coresight and ETM support, adds cpuidle low
power states and updates the CPUs' compatible.
For SM8250 it adds regulators from the PM8150, PM8150L and PM8009 and
adds voltage corners, it defines the nodes for UFS PHY and controller
and finally corrects a typo in the PDC node to make SPMI functional.
For MSM8916 I2C1 and I2C5 are defined, a node for the CCI camera control
interface bus is added and Coresight is disabled by default to match
some product configurations. The Samsung A3U gained display support and
Samsung A5U gained touchscreen support.
MSM8996 now property describes the power supply chain for the GPU, the
CCI camera control interface bus is added and the DB820c has the
regulators of the secondary PMIC defined.
For QCS404 USB PHYs and controllers are defined and wired up for the
EVB.
SDM630/SDM660 platform support is added and the Xiaomi Redmi Note 7
defined.
It also contains a number of changes throughout to improve DT binding
compliance.
* tag 'qcom-arm64-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (68 commits)
arm64: dts: qcom: sc7180: Correct the pdc interrupt ranges
arm64: dts: qcom: sc7180: add IPA information
arm64: dts: qcom: sc7180: Fix ETMv4 power management patch
arm64: dts: qcom: sc7180: Add A618 gpu dt blob
dt-bindings: arm-smmu: Add sc7180 compatible string
arm64: dts: qcom: msm8996: Make GPU node control GPU_GX GDSC
arm64: dts: qcom: db820c: Add vdd_gfx and tie it into mmcc
arm64: dts: qcom: apq8016-sbc: merge -pins.dtsi into main .dtsi
arm64: dts: qcom: msm8916: move gpu opp table to gpu node
arm64: dts: qcom: msm8916: avoid using _ in node names
arm64: dts: qcom: c630: Specify UFS device reset
arm64: dts: qcom: c630: Add WiFi node
arm64: dts: qcom: msm8916-samsung-a3u: add nodes for display panel
arm64: dts: qcom: db820c: Fix invalid pm8994 supplies
arm64: dts: qcom: db820c: Add pmi8994 RPM regulators
arm64: dts: qcom: msm8916: Disable coresight by default
arm64: dts: qcom: sc7180: Add "no-map" to cmd_db reserved area
arm64: dts: qcom: msm8916-samsung-a5u: Add touchscreen
arm64: dts: qcom: msm8916-samsung-a2015: Add touchscreen regulator
arm64: dts: qcom: msm8916: Add blsp_i2c5
...
Link: https://lore.kernel.org/r/20200519052528.1249950-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- replace deprecated compatible for the usb PHY
MT6797:
- switch to SPDX identifier
- add and enable I2C device for x20 development board
- add I2C compatible to the binding description
MT7622:
- add Wi-Fi device and enable it for the Bananpi-R64
MT8173:
- add CPU capacities based on Dhryston benchmark
- fix DT build warnings
- set throtteling range to limitless
- add Elm and Hana devices on which several chromebooks are based
- add Global Command Queue entries to the users
MT8183:
- split cpuidle states in two as the clusters have different target residencies
-----BEGIN PGP SIGNATURE-----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=tN8C
-----END PGP SIGNATURE-----
Merge tag 'v5.7-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
MT2712:
- replace deprecated compatible for the usb PHY
MT6797:
- switch to SPDX identifier
- add and enable I2C device for x20 development board
- add I2C compatible to the binding description
MT7622:
- add Wi-Fi device and enable it for the Bananpi-R64
MT8173:
- add CPU capacities based on Dhryston benchmark
- fix DT build warnings
- set throtteling range to limitless
- add Elm and Hana devices on which several chromebooks are based
- add Global Command Queue entries to the users
MT8183:
- split cpuidle states in two as the clusters have different target residencies
* tag 'v5.7-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: mt8173: Add capacity-dmips-mhz attributes
arm64: dts: mt2712: use non-empty ranges for usb-phy
arm64: dts: mt8173: fix mdp aliases property name
arm64: dts: mediatek: Switch to SPDX license identifier for MT6797 SoC
arm64: dts: mediatek: Enable I2C support for 96Boards X20 Development board
arm64: dts: mediatek: Add I2C support for MT6797 SoC
dt-bindings: i2c: Document I2C controller binding for MT6797 SoC
arm64: dts: mt8173: fix cooling device range
arm64: dts: mediatek: add mt8173 elm and hana board
arm64: dts: mt8173: fix unit name warnings
arm64: dts: mt8173: add uart aliases
dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana
arm64: dts: mt8183: adjust cpuidle target residency
arm64: dts: mt8173: Add gce setting in mmsys and display node
arm64: dts: mt7622: add built-in Wi-Fi device nodes
Link: https://lore.kernel.org/r/2794a8db-c14f-ac34-9e28-9f3700db6c4c@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
support, including:
- Support for the IOMMU on the H6
- Support for cpufreq / thermal throttling on the H6
- Support for the mailbox on the A64, A83t, H3, H5 and H6
- New boards: A20-OLinuXino-LIME-eMMC
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXr7NHgAKCRDj7w1vZxhR
xbhGAQCDavHkpjvq4Hwk/znoS0Y6NvW1JQUyKUWH8K6ah1ZkFwEA5gC0Ac9cbDAk
Q5fZeYl7mPbEL9DI0RphVqHmY2ezXw0=
=WR5/
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual number of patches to improve the Allwinner Device Tree
support, including:
- Support for the IOMMU on the H6
- Support for cpufreq / thermal throttling on the H6
- Support for the mailbox on the A64, A83t, H3, H5 and H6
- New boards: A20-OLinuXino-LIME-eMMC
* tag 'sunxi-dt-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (23 commits)
arm64: dts: allwinner: h6: Add IOMMU
arm64: dts: allwinner: h6: Enable CPU opp tables for Tanix TX6
arm64: dts: allwinner: h6: add voltage range to OPP table
arm64: dts: allwinner: sun50i-a64: Add missing address/size-cells
arm64: dts: allwinner: h6: Enable CPU opp tables for Pine H64
arm64: dts: allwinner: Sort Pine H64 device-tree nodes
arm64: dts: allwinner: h6: Enable CPU opp tables for Orange Pi 3
arm64: dts: allwinner: h6: Enable CPU opp tables for Beelink GS1
arm64: dts: allwinner: h6: Add CPU Operating Performance Points table
arm64: dts: allwinner: h6: Add thermal trip points/cooling map
arm64: dts: allwinner: h6: Add clock to CPU cores
arm64: allwinner: h6: orangepi-lite2: Support BT+WIFI combo module
arm64: dts: allwinner: h6: orangepi: Disable OTG mode
arm64: dts: allwinner: h6: orangepi: Add gpio power supply
ARM: dts: sun8i-h2-plus-bananapi-m2-zero: Fix led polarity
arm64: dts: allwinner: h6: Add msgbox node
arm64: dts: allwinner: a64: Add msgbox node
ARM: dts: sunxi: h3/h5: Add msgbox node
ARM: dts: sunxi: a83t: Add msgbox node
ARM: dts: sun8i-h3: add opp table for mali gpu
...
Link: https://lore.kernel.org/r/cfa66bd9-f74c-4614-9ea5-9ef8546cc571.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Initial support for the Renesas RZ/G1H SoC on the iWave RainboW
Qseven SOM (G21M) and board (G21D),
- Support for the AISTARVISION MIPI Adapter V2.1 camera board on the
Silicon Linux EK874 RZ/G2E evaluation kit.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXr5g8QAKCRCKwlD9ZEnx
cDusAQD4SCmyY0MZZNWQhkhu2ics2wYpKItw4Y7E4fl9XUlXkQEAyyN11vVNoteX
7KvNX7/9eXpberlcx4H6szPQsOzWzwM=
=2KDk
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.8 (take two)
- Initial support for the Renesas RZ/G1H SoC on the iWave RainboW
Qseven SOM (G21M) and board (G21D),
- Support for the AISTARVISION MIPI Adapter V2.1 camera board on the
Silicon Linux EK874 RZ/G2E evaluation kit.
* tag 'renesas-arm-dt-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION MIPI Adapter V2.1
ARM: dts: r8a7742: Add GPIO nodes
ARM: dts: r8a7742: Add [H]SCIF{A|B} support
ARM: dts: r8a7742: Add IRQC support
ARM: dts: r8a7742-iwg21d-q7: Add iWave G21D-Q7 board based on RZ/G1H
ARM: dts: r8a7742-iwg21m: Add iWave RZ/G1H Qseven SOM
ARM: dts: r8a7742: Initial SoC device tree
clk: renesas: Add r8a7742 CPG Core Clock Definitions
dt-bindings: power: rcar-sysc: Add r8a7742 power domain index macros
Link: https://lore.kernel.org/r/20200515100547.14671-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add pinconf for spi2 and spi3 nodes and increase the drive
strength to achieve the max speed for the Hikey960 board
- Add CTI nodes for the Hikey620 board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+heh
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-5.8' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon SoCs DT updates for 5.8
- Add pinconf for spi2 and spi3 nodes and increase the drive
strength to achieve the max speed for the Hikey960 board
- Add CTI nodes for the Hikey620 board
* tag 'hisi-arm64-dt-for-5.8' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hi6220: Add CTI options
arm64: dts: hikey960: pinctrl: Fix spi2/spi3 pinconf
Link: https://lore.kernel.org/r/5EBE430E.6090508@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The 'pinctrl-names' property should contain a list of names
to the assigned states. The value 'led_pins' in the gpio-leds
node on rk3326-odroid-go2 is not a state that is normally used,
so change it the common name 'default'.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200519111444.2208-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400
reference board with an S922X chip.
- 4GB LPDDR4 RAM
- 64GB eMMC storage
- 10/100/1000 Base-T Ethernet
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
- HDMI 2.1 video
- Analogue audio output
- 1x RS232 port
- 2x USB 2.0 port
- 2x USB 3.0 ports
- IR receiver
- 1x micro SD card slot
- 1x Power on/off button
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200520014329.12469-6-christianshewitt@gmail.com
Convert the Ugoos AM6 dts into meson-g12b-w400.dtsi, and then create
a new AM6 dts that references it. This is in preparation for several
new G12B devices that will share the common w400 dtsi.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200520014329.12469-2-christianshewitt@gmail.com
Keep the switch port labels consistent across the different board
variants. If the user wants to rename them, it should be done in
user-space.
Fixes: ab43f03074 ("arm64: dts: ls1028a: sl28: add support for variant 2")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The RTC found on the MAX77620 PMIC can be used as a wakeup source on
Jetson TX2, which is useful to wake the system from suspend at a given
time.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Enable the VI I2C so that the peripherals connected to it (such as the
camera connector, an INA3221 power monitor and the USB 3.1 4-port hub)
can be accessed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra210 contains VI controller for video input capture from MIPI
CSI camera sensors and also supports built-in test pattern generator.
CSI ports can be one-to-one mapped to VI channels for capturing from
an external sensor or from built-in test pattern generator.
This patch adds support for VI and CSI and enables them in Tegra210
device tree.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra210 device tree is missing reset-cells property for the memory
controller node. This patch adds it.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra210 device tree lists CSI clock and reset under SOR powergate
node.
But Tegra210 has CSICIL in SOR partition and CSI in VENC partition.
So, this patch includes fix for SOR powergate node.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The PMIC RTC is currently unable to wakeup Tegra194 on the Jetson Xavier
platform because the interrupt from the PMIC is not usin the PMC as the
interrupt parent but the GIC directly. Update the PMIC interrupt to use
the PMC as the interrupt parent so that the PMIC RTC alarms can wakeup
the device.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The 'phy-mode' property is currently defined as 'rgmii' for Jetson
Xavier. This indicates that the RGMII RX and TX delays are set by the
MAC and the internal delays set by the PHY are not used.
If the Marvell PHY driver is enabled, such that it is used and not the
generic PHY, ethernet failures are seen (DHCP is failing to obtain an
IP address) and this is caused because the Marvell PHY driver is
disabling the internal RX and TX delays. For Jetson Xavier the internal
PHY RX and TX delay should be used and so fix this by setting the
'phy-mode' to 'rgmii-id' and not 'rgmii'.
Fixes: f89b58ce71 ("arm64: tegra: Add ethernet controller on Tegra194")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The external memory controller can be used as a cooling device for the
LPDDR chips. Hook it up to the "mem" thermal zone of the SOCTHERM block
so that temperature polling can be enabled on the EMC when a given
temperature is exceeded.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Node names are supposed to match the class of the device. The
mmsys node is a syscon as it provides more then just a clock controller.
Update the name.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20200518113156.25009-4-matthias.bgg@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Node names are supposed to match the class of the device, mmsys is a
system controller (syscon) not a clock controller, so change the node
name accordingly.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20200401201736.2980433-4-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Interrupts is a required property according to SRC binding, add
it for SRC node.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Interrupts is a required property according to SRC binding, add
it for SRC node.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Assign IMX8M*_CLK_A53_SRC's parent to system pll1 and
assign IMX8M*_CLK_A53_CORE's parent to arm pll out as what
is done in drivers/clk/imx/clk-imx8m*.c, then we could remove
the settings in driver which triggers lockdep warning.
Reported-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Now that the LPUART has support for the LS1028A SoC, also enable it on
our board.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add Ethernet interrupt details to the WeTek Hub/Play2 dtsi to resolve
an issue with Ethernet probing in mainline u-boot.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200518025451.16401-1-christianshewitt@gmail.com
The Smartlabs SML-5442TW is based on the Amlogic P231 reference design
but with the following differences:
- The Yellow and Blue LEDs are available but disabled
- The Red and Green LEDs are used to signal off/on status
- uart_AO can be accessed after opening the case; soldered pins exist
- QCA9377 instead of the usual Ampak/Broadcom module
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200510124129.31575-4-christianshewitt@gmail.com
add the internal DAC glue support on the g12 and sm1 family
This glue connects the different TDM interfaces of the SoC to
the internal audio DAC codec.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200506221656.477379-8-jbrunet@baylibre.com
Add the internal DAC support on the libretech CC. The output of this
DAC is provided on the 9J4 connector.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200506221656.477379-6-jbrunet@baylibre.com
Add the internal DAC support on the libretech CC. The output of this
DAC is provided on the 9J5 connector.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200506221656.477379-5-jbrunet@baylibre.com
Add the internal DAC support on the libretech CC. The output of this
DAC is provided on the 3.5mm jack connector.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200506221656.477379-4-jbrunet@baylibre.com
Add the necessary bits to support the internal audio DAC the p230/q200
reference design derivated boards. The output of this DAC is provided
on the 3.5mm jack connector
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200506221656.477379-3-jbrunet@baylibre.com
Add the board support for the Hardkernel Odroid-C4 single board computer.
The Odroid-C4 is the Odroid-C2 successor with same form factor, but using
a modern Amlogic S905X3 (SM1) SoC and 4x USB3 ports.
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200506080702.6645-3-narmstrong@baylibre.com
Add basic audio support on the p230/q200 reference design.
This initial support is limited to HDMI i2s and SPDIF (LPCM).
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20200421163935.775935-4-jbrunet@baylibre.com
Add the AIU audio device to the Amlogic GX SoC family DT.
ATM, this device provides the i2s and spdif output stages and also
the hdmi and internal codec glues.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20200421163935.775935-3-jbrunet@baylibre.com
The pd_tcpc0 and pd_tcpc1 nodes are currently a sub node of pd_vio.
In the rk3399 TRM figure of the 'Power Domain Partition' and in the
table of 'Power Domain and Voltage Domain Summary' these power domains
are positioned directly under VD_LOGIC, so fix that in 'rk3399.dtsi'.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Caesar Wang <wxt@rock-chips.com>
Link: https://lore.kernel.org/r/20200428203003.3318-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
'bus-width' and pinctrl containing the bus-pins
should be in the same file, so add them to
all mmc nodes in 'px30.dtsi'.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200416183053.6045-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The mmc-controller.yaml didn't explicitly say disable-wp is
for SD card slot only, but that is what it was designed for
in the first place.
Remove all disable-wp from emmc or sdio controllers.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20191219121954.2450-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Current dts files with 'gpio-led' nodes were manually verified.
In order to automate this process leds-gpio.txt
has been converted to yaml. With this conversion a check
for pattern properties was added. A test with the command
below gives a screen full of warnings like:
arch/arm64/boot/dts/rockchip/rk3368-r88.dt.yaml: gpio-leds:
'work' does not match any of the regexes:
'(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Fix these errors with help of the following rules:
1: Add nodename in the preferred form.
2: Always add a label that ends with '_led' to prevent conflicts
with other labels such as 'power' and 'mmc'
3: If leds need pinctrl add a label that ends with '_led_pin'
also to prevent conflicts with other labels.
patternProperties:
# The first form is preferred, but fall back to just 'led'
# anywhere in the node name to at least catch some child nodes.
"(^led-[0-9a-f]$|led)":
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/
leds-gpio.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200428144933.10953-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3399-evb.dt.yaml: pd_vio@15:
'pd_tcpc0@RK3399_PD_TCPC0', 'pd_tcpc1@RK3399_PD_TCPC1'
do not match any of the regexes:
'.*-names$', '.*-supply$', '^#.*-cells$',
'^#[a-zA-Z0-9,+\\-._]{0,63}$',
'^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}$',
'^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$',
'^__.*__$', 'pinctrl-[0-9]+'
Fix error by replacing the wrong defines by the ones
mentioned in 'rk3399-power.h'.
make -k ARCH=arm64 dtbs_check
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200428203003.3318-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below this error:
arch/arm64/boot/dts/rockchip/rk3399-orangepi.dt.yaml: phy:
'#phy-cells' is a required property
'phy' is a reserved nodename and should not be used for pinctrl,
so change it to 'gmac'.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200321215423.12176-6-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives this error:
arch/arm64/boot/dts/rockchip/rk3399-orangepi.dt.yaml: phy@1:
'#phy-cells' is a required property
The phy nodename is used by a phy-handle.
The parent node is compatible with "snps,dwmac-mdio",
so change nodename to 'ethernet-phy', for which '#phy-cells'
is not a required property
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200321215423.12176-5-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dt.yaml: phy:
'#phy-cells' is a required property
arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dt.yaml: phy:
'#phy-cells' is a required property
arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dt.yaml: phy:
'#phy-cells' is a required property
'phy' is a reserved nodename and should not be used for pinctrl,
so change it to 'gmac'.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200321215423.12176-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives these errors:
arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dt.yaml: phy@1:
'#phy-cells' is a required property
arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dt.yaml: phy@1:
'#phy-cells' is a required property
arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dt.yaml: phy@1:
'#phy-cells' is a required property
The rtl8211e node is used by a phy-handle.
The parent node is compatible with "snps,dwmac-mdio",
so change nodename to 'ethernet-phy', for which '#phy-cells'
is not a required property.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200321215423.12176-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives this error:
arch/arm64/boot/dts/rockchip/rk3328-a1.dt.yaml: phy@0:
'#phy-cells' is a required property
The rtl8211f node is used by a phy-handle.
The parent node is compatible with "snps,dwmac-mdio",
so change nodename to 'ethernet-phy', for which '#phy-cells'
is not a required property.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200321215423.12176-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: phy@0:
'#phy-cells' is a required property
The phy nodename is normally used by a phy-handle.
This node is however compatible with
"ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"
which is just been added to 'ethernet-phy.yaml'.
So change nodename to 'ethernet-phy' for which '#phy-cells'
is not a required property
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200321215423.12176-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The defines RK_FUNC_1 and RK_FUNC_2 are deprecated,
so replace them with the preferred form.
Restyle properties in the same line.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200512203524.7317-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The lack of unique context in '0f1decaa83b7 ("arm64: dts: qcom: sc7180:
Support ETMv4 power management")' caused the patch to be applied
off-by-one. Move the "arm,coresight-loses-context-with-cpu" properties
down one node, so that it applies to the ETMs and not the replicator.
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The SRAM DT binding requires child nodes to use a certain node name
scheme.
Change the naming from scp-shmem to scp-sram to comply with that.
Link: https://lore.kernel.org/r/20200513103016.130417-19-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The Mali binding insists on the GPU interrupts to be in ordered as: job,
mmu, gpu.
Sort the GPU interrupts and interrupt-names properties accordingly.
Link: https://lore.kernel.org/r/20200513103016.130417-17-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Most Arm Ltd. boards are employing a layered bus structure, to map
the hardware design (SoC, motherboard, IOFPGA) and structure the DTs.
The "simple-bus" nodes only allow a limited set of node names. Switch
to use *-bus to be binding compliant.
This relies on a pending dt-schema.git fix for now:
https://github.com/devicetree-org/dt-schema/pull/38
Link: https://lore.kernel.org/r/20200513103016.130417-16-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The SMMU name in the RevC FVP DT file was not fully binding compliant.
Adjust the node name to match the binding's list of allowed names, also
shuffle the order of the interrupts to comply with the expected order.
Link: https://lore.kernel.org/r/20200513103016.130417-15-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
