Commit Graph

60 Commits

Author SHA1 Message Date
Len Brown
650a37f32d tools/power turbostat: fix IVB support
Initial IVB support went into turbostat in Linux-3.1:
553575f1ae
(tools turbostat: recognize and run properly on IVB)

However, when running on IVB, turbostat would fail
to report the new couters added with SNB, c7, pc2 and pc7.
So in scenarios where these counters are non-zero on IVB,
turbostat would report erroneous residencey results.

In particular c7 time would be added to c1 time,
since c1 time is calculated as "that which is left over".

Also, turbostat reports MHz capabilities when passed
the "-v" option, and it would incorrectly report 133MHz
bclk instead of 100MHz bclk for IVB, which would inflate
GHz reported with that option.

This patch is a backport of a fix already included in turbostat v2.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-03 23:47:49 -04:00
Len Brown
d15cf7c129 tools/power turbostat: fix un-intended affinity of forked program
Linux 3.4 included a modification to turbostat to
lower cross-call overhead by using scheduler affinity:

15aaa34654
(tools turbostat: reduce measurement overhead due to IPIs)

In the use-case where turbostat forks a child program,
that change had the un-intended side-effect of binding
the child to the last cpu in the system.

This change removed the binding before forking the child.

This is a back-port of a fix already included in turbostat v2.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-03 23:24:00 -04:00
Peter Zijlstra
8e7fbcbc22 sched: Remove stale power aware scheduling remnants and dysfunctional knobs
It's been broken forever (i.e. it's not scheduling in a power
aware fashion), as reported by Suresh and others sending
patches, and nobody cares enough to fix it properly ...
so remove it to make space free for something better.

There's various problems with the code as it stands today, first
and foremost the user interface which is bound to topology
levels and has multiple values per level. This results in a
state explosion which the administrator or distro needs to
master and almost nobody does.

Furthermore large configuration state spaces aren't good, it
means the thing doesn't just work right because it's either
under so many impossibe to meet constraints, or even if
there's an achievable state workloads have to be aware of
it precisely and can never meet it for dynamic workloads.

So pushing this kind of decision to user-space was a bad idea
even with a single knob - it's exponentially worse with knobs
on every node of the topology.

There is a proposal to replace the user interface with a single
3 state knob:

 sched_balance_policy := { performance, power, auto }

where 'auto' would be the preferred default which looks at things
like Battery/AC mode and possible cpufreq state or whatever the hw
exposes to show us power use expectations - but there's been no
progress on it in the past many months.

Aside from that, the actual implementation of the various knobs
is known to be broken. There have been sporadic attempts at
fixing things but these always stop short of reaching a mergable
state.

Therefore this wholesale removal with the hopes of spurring
people who care to come forward once again and work on a
coherent replacement.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1326104915.2442.53.camel@twins
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-17 13:48:56 +02:00
Linus Torvalds
a335750b9a Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull ACPI & Power Management changes from Len Brown:
 - ACPI 5.0 after-ripples, ACPICA/Linux divergence cleanup
 - cpuidle evolving, more ARM use
 - thermal sub-system evolving, ditto
 - assorted other PM bits

Fix up conflicts in various cpuidle implementations due to ARM cpuidle
cleanups (ARM at91 self-refresh and cpu idle code rewritten into
"standby" in asm conflicting with the consolidation of cpuidle time
keeping), trivial SH include file context conflict and RCU tracing fixes
in generic code.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (77 commits)
  ACPI throttling: fix endian bug in acpi_read_throttling_status()
  Disable MCP limit exceeded messages from Intel IPS driver
  ACPI video: Don't start video device until its associated input device has been allocated
  ACPI video: Harden video bus adding.
  ACPI: Add support for exposing BGRT data
  ACPI: export acpi_kobj
  ACPI: Fix logic for removing mappings in 'acpi_unmap'
  CPER failed to handle generic error records with multiple sections
  ACPI: Clean redundant codes in scan.c
  ACPI: Fix unprotected smp_processor_id() in acpi_processor_cst_has_changed()
  ACPI: consistently use should_use_kmap()
  PNPACPI: Fix device ref leaking in acpi_pnp_match
  ACPI: Fix use-after-free in acpi_map_lsapic
  ACPI: processor_driver: add missing kfree
  ACPI, APEI: Fix incorrect APEI register bit width check and usage
  Update documentation for parameter *notrigger* in einj.txt
  ACPI, APEI, EINJ, new parameter to control trigger action
  ACPI, APEI, EINJ, limit the range of einj_param
  ACPI, APEI, Fix ERST header length check
  cpuidle: power_usage should be declared signed integer
  ...
2012-03-30 16:45:39 -07:00
Len Brown
15aaa34654 tools turbostat: harden against cpu online/offline
Sometimes users have turbostat running in interval mode
when they take processors offline/online.

Previously, turbostat would survive, but not gracefully.

Tighten up the error checking so turbostat notices
changesn sooner, and print just 1 line on change:

turbostat: re-initialized with num_cpus %d

Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-29 22:27:19 -04:00
Len Brown
88c3281f7b tools turbostat: reduce measurement overhead due to IPIs
turbostat uses /dev/cpu/*/msr interface to read MSRs.
For modern systems, it reads 10 MSR/CPU.  This can
be observed as 10 "Function Call Interrupts"
per CPU per sample added to /proc/interrupts.

This overhead is measurable on large idle systems,
and as Yoquan Song pointed out, it can even trick
cpuidle into thinking the system is busy.

Here turbostat re-schedules itself in-turn to each
CPU so that its MSR reads will always be local.
This replaces the 10 "Function Call Interrupts"
with a single "Rescheduling interrupt" per sample
per CPU.

On an idle 32-CPU system, this shifts some residency from
the shallow c1 state to the deeper c7 state:

 # ./turbostat.old -s
   %c0  GHz  TSC    %c1    %c3    %c6    %c7   %pc2   %pc3   %pc6   %pc7
  0.27 1.29 2.29   0.95   0.02   0.00  98.77  20.23   0.00  77.41   0.00
  0.25 1.24 2.29   0.98   0.02   0.00  98.75  20.34   0.03  77.74   0.00
  0.27 1.22 2.29   0.54   0.00   0.00  99.18  20.64   0.00  77.70   0.00
  0.26 1.22 2.29   1.22   0.00   0.00  98.52  20.22   0.00  77.74   0.00
  0.26 1.38 2.29   0.78   0.02   0.00  98.95  20.51   0.05  77.56   0.00
^C
 i# ./turbostat.new -s
   %c0  GHz  TSC    %c1    %c3    %c6    %c7   %pc2   %pc3   %pc6   %pc7
  0.27 1.20 2.29   0.24   0.01   0.00  99.49  20.58   0.00  78.20   0.00
  0.27 1.22 2.29   0.25   0.00   0.00  99.48  20.79   0.00  77.85   0.00
  0.27 1.20 2.29   0.25   0.02   0.00  99.46  20.71   0.03  77.89   0.00
  0.28 1.26 2.29   0.25   0.01   0.00  99.46  20.89   0.02  77.67   0.00
  0.27 1.20 2.29   0.24   0.01   0.00  99.48  20.65   0.00  78.04   0.00

cc: Youquan Song <youquan.song@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-29 22:04:58 -04:00
Len Brown
e23da0370f tools turbostat: add summary option
turbostat -s
cuts down on the amount of output, per user request.

also treak some output whitespace and the man page.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-29 13:22:06 -04:00
Franck Bui-Huu
f16603386b cpupower tools: add install target to the debug tools' makefiles
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:40:11 +01:00
Franck Bui-Huu
7490ca1ea5 cpupower tools: allow to build debug tools in a separate directory too
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:40:11 +01:00
Thomas Renninger
62d5a67d65 cpupower: Fix broken mask values
Signed-off-by: Thomas Renninger <trenn@suse.de>
Tested-by: Dave Jones <davej@redhat.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:40:11 +01:00
Franck Bui-Huu
68bb2c3a14 cpupower tool: allow to build in a separate directory
This patch allows cpupower tool to generate its output files in a
seperate directory. This is now possible by passing the 'O=<path>' to
the command line.

This can be usefull for a normal user if the kernel source code is
located in a read only location.

This is patch stole some bits of the perf makefile.

[linux@dominikbrodowski.net: fix commit message]
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:40:10 +01:00
Franck Bui-Huu
3827150458 cpupower tool: makefile: simplify the recipe used to generate cpupower.pot target
Use the '-p' and '-o' switches to specify the pathname of the output
file to xgettext(1). This avoids to move manually the output file if
xgettext(1) succeeds.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:40:10 +01:00
Franck Bui-Huu
cf0213fdff cpupower tool: remove use of undefined variables from the clean target of the top makefile
UTIL_BINS and IDLE_OBJS variables are not defined at all, so
there's no need to remove their content from the 'clean' target.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:40:10 +01:00
Ozan Çağlayan
f2a00bb31c cpupower: Fix linking with --as-needed
Fix linking order to avoid undefined reference errors when
using --as-needed linker flag.

Signed-off-by: Ozan Çağlayan <ozan@pardus.org.tr>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:40:10 +01:00
Thomas Renninger
e0c6082dae cpupower: Remove unneeded code and by that fix a memleak
Looks like some not needed debug code slipped in.
Also this code:
tmp = sysfs_get_idlestate_name(cpu, idlestates - 1);
performs a strdup and the mem was not freed again.
-> delete it.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:40:10 +01:00
Thomas Renninger
0b37ee65e5 cpupower: Fix number of idle states
The number of idle states was wrong.
The POLL idle state (on X86) was missed out:
Number of idle states: 4
Available idle states: C1-NHM C3-NHM C6-NHM

While the POLL is not a real idle state, its
statistics should still be shown. It's now also
explained in a detailed manpage.
This should fix a bug of missing the first idle
state on other archs.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:40:09 +01:00
Thomas Renninger
e03bd1aa00 cpupower: Unify cpupower-frequency-* manpages
cpupower-frequency-* manpages slightly differed from the others.
  - Use uppercase letters in the title
  - Show cpupower Manual in the header
  - Remove Mattia from left down corner of the manpage, he is already
    listed as author
  - Remove --help, prints this message -> not needed

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:40:09 +01:00
Thomas Renninger
e7d85a9341 cpupower: Add cpupower-idle-info manpage
The last missing manpage for cpupower tools.

More info about other architecture's sleep state specialities would be great.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:40:09 +01:00
Thomas Renninger
f642089ce0 cpupower: AMD fam14h/Ontario monitor can also be used by fam12h cpus
The name of the monitor is updated at runtime to the name of the
CPU type.

Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Andreas Herrmann <herrmann.der.user@googlemail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:40:08 +01:00
Thomas Renninger
568a89904c cpupower: Better interface for accessing AMD pci registers
AMD's BKDG (Bios and Kernel Developers Guide) talks in the CPU spec of their
CPU families about PCI registers defined by "device" (slot) and func(tion).

Assuming that CPU specific configuration PCI devices are always on domain
and bus zero a pci_slot_func_init() func which gets the slot and func of
the desired PCI device passed looks like the most convenient way.

This also obsoletes the PCI device id maintenance.

Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Andreas Herrmann <herrmann.der.user@googlemail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03 14:40:08 +01:00
Linus Torvalds
507a03c1cb Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
This includes initial support for the recently published ACPI 5.0 spec.
In particular, support for the "hardware-reduced" bit that eliminates
the dependency on legacy hardware.

APEI has patches resulting from testing on real hardware.

Plus other random fixes.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (52 commits)
  acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
  intel_idle: Split up and provide per CPU initialization func
  ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
  ACPI processor: Remove unneeded cpuidle_unregister_driver call
  intel idle: Make idle driver more robust
  intel_idle: Fix a cast to pointer from integer of different size warning in intel_idle
  ACPI: kernel-parameters.txt : Add intel_idle.max_cstate
  intel_idle: remove redundant local_irq_disable() call
  ACPI processor: Fix error path, also remove sysdev link
  ACPI: processor: fix acpi_get_cpuid for UP processor
  intel_idle: fix API misuse
  ACPI APEI: Convert atomicio routines
  ACPI: Export interfaces for ioremapping/iounmapping ACPI registers
  ACPI: Fix possible alignment issues with GAS 'address' references
  ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64)
  ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64)
  ACPI: Store SRAT table revision
  ACPI, APEI, Resolve false conflict between ACPI NVS and APEI
  ACPI, Record ACPI NVS regions
  ACPI, APEI, EINJ, Refine the fix of resource conflict
  ...
2012-01-18 15:51:48 -08:00
Len Brown
79ba0db69c Merge branches 'einj', 'intel_idle', 'misc', 'srat' and 'turbostat-ivb' into release 2012-01-18 01:15:54 -05:00
Arun Thomas
9b6cf1a012 tools/power turbostat: update fields in manpage
Field names were shortened: "pkg" is now "pk", "core" is now "cr"

Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-15 16:34:20 +01:00
Len Brown
553575f1ae tools turbostat: recognize and run properly on IVB
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-18 03:32:01 -05:00
Len Brown
efb90582c5 Merge branches 'acpi', 'idle', 'mrst-pmu' and 'pm-tools' into next 2011-11-06 22:14:50 -05:00
Dominik Brodowski
498ca793d9 cpupower: use man(1) when calling "cpupower help subcommand"
Instead of printing something non-formatted to stdout, call
man(1) to show the man page for the proper subcommand.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-08-19 17:13:56 +02:00
Dominik Brodowski
47c336307a cpupower: make NLS truly optional
Loosely based on a patch for cpufrequtils, submittted by
Sergey Dryabzhinsky <sergey.dryabzhinsky@gmail.com> and

signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-08-19 17:00:02 +02:00
Dave Jones
63b37de128 cpupower: fix Makefile typo
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-08-19 16:49:49 +02:00
Thomas Renninger
9ee31f618a cpupower: Make monitor command -c/--cpu aware
This allows for example:
cpupower -c 2-4,6 monitor -m Mperf
              |Mperf
PKG |CORE|CPU | C0   | Cx   | Freq
   0|   8|   4|  2.42| 97.58|  1353
   0|  16|   2| 14.38| 85.62|  1928
   0|  24|   6|  1.76| 98.24|  1442
   1|  16|   3| 15.53| 84.47|  1650

CPUs always get resorted for package, core then cpu id if it could get read out
(or however you name these topology levels...).
Still this is a nice way to keep the overview if a test binary is bound to
a specific CPU or if one wants to show all CPUs inside a package or similar.

Still missing: Do not measure not available cores to reduce the overhead
and achieve better results.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-08-15 20:03:16 +02:00
Thomas Renninger
7c74d2bc5a cpupower: Better detect offlined CPUs
Before, checking for offlined CPUs was done dirty and
it was checked whether topology parsing returned -1 values.
But this is a valid case on a Xen (and possibly other) kernels.

Do proper online/offline checking, also take CONFIG_HOTPLUG_CPU
option into account (no /sys/devices/../cpuX/online file).

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-08-15 20:03:10 +02:00
Thomas Renninger
88f984e0e2 cpupower: Do not show an empty Idle_Stats monitor if no idle driver is available
By taking error values of:
sysfs_get_idlestate_count(..);
into account.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-08-15 20:03:05 +02:00
Thomas Renninger
2dfc818b35 cpupower: mperf monitor - Use TSC to calculate max frequency if possible
Which makes the implementation independent from cpufreq drivers.
Therefore this would also work on a Xen kernel where the hypervisor
is doing frequency switching and idle entering.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-08-15 20:02:59 +02:00
Amerigo Wang
75f25bd31d cpupower: avoid using symlinks
Reference the source directly, don't create symlinks.

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-08-15 20:02:50 +02:00
Linus Torvalds
f673b7c2c5 Merge branch 'tools-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6
* 'tools-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  tools/power turbostat: fit output into 80 columns on snb-ep
  tools/power x86_energy_perf_policy: fix print of uninitialized string
2011-08-02 21:17:39 -10:00
Len Brown
d30c4b7a87 tools/power turbostat: fit output into 80 columns on snb-ep
Reduce columns for package number to 1.
If you can afford more than 9 packages,
you can also afford a terminal with more than 80 columns:-)

Also shave a column also off the package C-states

Signed-off-by: Len Brown <len.brown@intel.com>
2011-08-02 18:33:31 -04:00
Thomas Renninger
029e9f7366 cpupower: Do detect IDA (opportunistic processor performance) via cpuid
IA32-Intel Devel guide Volume 3A - 14.3.2.1
-------------------------------------------
...
Opportunistic processor performance operation can be disabled by setting bit 38 of
IA32_MISC_ENABLES. This mechanism is intended for BIOS only. If
IA32_MISC_ENABLES[38] is set, CPUID.06H:EAX[1] will return 0.

Better detect things via cpuid, this cleans up the code a bit
and the MSR parts were not working correctly anyway.

Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: lenb@kernel.org
CC: linux@dominikbrodowski.net
CC: cpufreq@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 19:37:27 +02:00
Thomas Renninger
8fb2e440b2 cpupower: Show Intel turbo ratio support via ./cpupower frequency-info
This adds the last piece missing from turbostat (if called with -v).
It shows on Intel machines supporting Turbo Boost how many cores
have to be active/idle to enter which boost mode (frequency).

Whether the HW really enters these boost modes can be verified via
./cpupower monitor.

Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: lenb@kernel.org
CC: linux@dominikbrodowski.net
CC: cpufreq@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 19:37:25 +02:00
Roman Vasiyarov
76b659a31d cpupowerutils: increase MAX_LINE_LEN
larger sysfs data (>255 bytes) was truncated and thus used improperly

[linux@dominikbrodowski.net: adapted to cpupowerutils]
Signed-off-by: Roman Vasiyarov <rvasiyarov@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 18:35:40 +02:00
Thomas Renninger
ee3db6fcaf cpupower: Rename package from cpupowerutils to cpupower
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 18:35:40 +02:00
Thomas Renninger
4c22337f86 cpupowerutils: Rename: libcpufreq->libcpupower
[linux@dominikbrodowski.net: fix .gitignore]
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 18:35:40 +02:00
Dominik Brodowski
af594f0ceb cpupowerutils: use kernel version-derived version string
As cpupowerutils is intended to be included into the kernel sources,
use the kernel versioning instead of a custom version.

The script utils/version-gen.sh is largely based on the script already
found in tools/perf/util/PERF-VERSION-GEN .

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 18:35:39 +02:00
Dominik Brodowski
a1ce5ba2b7 cpupowerutils: utils - ConfigStyle bugfixes
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 18:35:39 +02:00
Dominik Brodowski
2cd005cac6 cpupowerutils: helpers - ConfigStyle bugfixes
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 18:35:39 +02:00
Dominik Brodowski
b510b54127 cpupowerutils: idle_monitor - ConfigStyle bugfixes
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 18:35:38 +02:00
Dominik Brodowski
6c2b818551 cpupowerutils: lib - ConfigStyle bugfixes
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 18:35:38 +02:00
Dominik Brodowski
02af3cb5aa cpupowerutils: bench - ConfigStyle bugfixes
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 18:35:38 +02:00
Dominik Brodowski
f5ac0641d1 cpupowerutils: do not update po files on each and every compile
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 18:35:37 +02:00
Dominik Brodowski
7443af9c9b cpupowerutils: remove ccdv, use kernel quiet/verbose mechanism
Use the quiet/verbose mechanism found in kernel tools, without
relying on the special tool "ccdv"

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 18:35:37 +02:00
Dominik Brodowski
c5db37fa0a cpupowerutils: use COPYING, CREDITS from top-level directory
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 18:35:36 +02:00
Dominik Brodowski
7fe2f6399a cpupowerutils - cpufrequtils extended with quite some features
CPU power consumption vs performance tuning is no longer
limited to CPU frequency switching anymore: deep sleep states,
traditional dynamic frequency scaling and hidden turbo/boost
frequencies are tied close together and depend on each other.
The first two exist on different architectures like PPC, Itanium and
ARM, the latter (so far) only on X86. On X86 the APU (CPU+GPU) will
only run most efficiently if CPU and GPU has proper power management
in place.

Users and Developers want to have *one* tool to get an overview what
their system supports and to monitor and debug CPU power management
in detail. The tool should compile and work on as many architectures
as possible.

Once this tool stabilizes a bit, it is intended to replace the
Intel-specific tools in tools/power/x86

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 18:35:36 +02:00