ext4_mark_inode_dirty() can fail for real reasons. Ignoring its return
value may lead ext4 to ignore real failures that would result in
corruption / crashes. Harden ext4_mark_inode_dirty error paths to fail
as soon as possible and return errors to the caller whenever
appropriate.
One of the possible scnearios when this bug could affected is that
while creating a new inode, its directory entry gets added
successfully but while writing the inode itself mark_inode_dirty
returns error which is ignored. This would result in inconsistency
that the directory entry points to a non-existent inode.
Ran gce-xfstests smoke tests and verified that there were no
regressions.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20200427013438.219117-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Using a separate function, ext4_set_errno() to set the errno is
problematic because it doesn't do the right thing once
s_last_error_errorcode is non-zero. It's also less racy to set all of
the error information all at once. (Also, as a bonus, it shrinks code
size slightly.)
Link: https://lore.kernel.org/r/20200329020404.686965-1-tytso@mit.edu
Fixes: 878520ac45 ("ext4: save the error code which triggered...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch moves ext4_fiemap to use iomap framework.
For xattr a new 'ext4_iomap_xattr_ops' is added.
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/b9f45c885814fcdd0631747ff0fe08886270828c.1582880246.git.riteshh@linux.ibm.com
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This allows the cause of an ext4_error() report to be categorized
based on whether it was triggered due to an I/O error, or an memory
allocation error, or other possible causes. Most errors are caused by
a detected file system inconsistency, so the default code stored in
the superblock will be EXT4_ERR_EFSCORRUPTED.
Link: https://lore.kernel.org/r/20191204032335.7683-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently when the call to ext4_htree_store_dirent fails the error return
variable 'ret' is is not being set to the error code and variable count is
instead, hence the error code is not being returned. Fix this by assigning
ret to the error return code.
Addresses-Coverity: ("Unused value")
Fixes: 8af0f08227 ("ext4: fix readdir error in the case of inline_data+dir_index")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Move the calculation of the location of the dirent tail into
initialize_dirent_tail(). Also prefix the function with ext4_ to fix
kernel namepsace polution.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Functions such as ext4_dirent_csum_verify() and ext4_dirent_csum_set()
don't actually operate on a directory entry, but a directory block.
And while they take a struct ext4_dir_entry *dirent as an argument, it
had better be the first directory at the beginning of the direct
block, or things will go very wrong.
Rename the following functions so that things make more sense, and
remove a lot of confusing casts along the way:
ext4_dirent_csum_verify -> ext4_dirblock_csum_verify
ext4_dirent_csum_set -> ext4_dirblock_csum_set
ext4_dirent_csum -> ext4_dirblock_csum
ext4_handle_dirty_dirent_node -> ext4_handle_dirty_dirblock
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch implements the actual support for case-insensitive file name
lookups in ext4, based on the feature bit and the encoding stored in the
superblock.
A filesystem that has the casefold feature set is able to configure
directories with the +F (EXT4_CASEFOLD_FL) attribute, enabling lookups
to succeed in that directory in a case-insensitive fashion, i.e: match
a directory entry even if the name used by userspace is not a byte per
byte match with the disk name, but is an equivalent case-insensitive
version of the Unicode string. This operation is called a
case-insensitive file name lookup.
The feature is configured as an inode attribute applied to directories
and inherited by its children. This attribute can only be enabled on
empty directories for filesystems that support the encoding feature,
thus preventing collision of file names that only differ by case.
* dcache handling:
For a +F directory, Ext4 only stores the first equivalent name dentry
used in the dcache. This is done to prevent unintentional duplication of
dentries in the dcache, while also allowing the VFS code to quickly find
the right entry in the cache despite which equivalent string was used in
a previous lookup, without having to resort to ->lookup().
d_hash() of casefolded directories is implemented as the hash of the
casefolded string, such that we always have a well-known bucket for all
the equivalencies of the same string. d_compare() uses the
utf8_strncasecmp() infrastructure, which handles the comparison of
equivalent, same case, names as well.
For now, negative lookups are not inserted in the dcache, since they
would need to be invalidated anyway, because we can't trust missing file
dentries. This is bad for performance but requires some leveraging of
the vfs layer to fix. We can live without that for now, and so does
everyone else.
* on-disk data:
Despite using a specific version of the name as the internal
representation within the dcache, the name stored and fetched from the
disk is a byte-per-byte match with what the user requested, making this
implementation 'name-preserving'. i.e. no actual information is lost
when writing to storage.
DX is supported by modifying the hashes used in +F directories to make
them case/encoding-aware. The new disk hashes are calculated as the
hash of the full casefolded string, instead of the string directly.
This allows us to efficiently search for file names in the htree without
requiring the user to provide an exact name.
* Dealing with invalid sequences:
By default, when a invalid UTF-8 sequence is identified, ext4 will treat
it as an opaque byte sequence, ignoring the encoding and reverting to
the old behavior for that unique file. This means that case-insensitive
file name lookup will not work only for that file. An optional bit can
be set in the superblock telling the filesystem code and userspace tools
to enforce the encoding. When that optional bit is set, any attempt to
create a file name using an invalid UTF-8 sequence will fail and return
an error to userspace.
* Normalization algorithm:
The UTF-8 algorithms used to compare strings in ext4 is implemented
lives in fs/unicode, and is based on a previous version developed by
SGI. It implements the Canonical decomposition (NFD) algorithm
described by the Unicode specification 12.1, or higher, combined with
the elimination of ignorable code points (NFDi) and full
case-folding (CF) as documented in fs/unicode/utf8_norm.c.
NFD seems to be the best normalization method for EXT4 because:
- It has a lower cost than NFC/NFKC (which requires
decomposing to NFD as an intermediary step)
- It doesn't eliminate important semantic meaning like
compatibility decompositions.
Although:
- This implementation is not completely linguistic accurate, because
different languages have conflicting rules, which would require the
specialization of the filesystem to a given locale, which brings all
sorts of problems for removable media and for users who use more than
one language.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The ext4_inline_data_fiemap() function calls fiemap_fill_next_extent()
while still holding the xattr semaphore. This is not necessary and it
triggers a circular lockdep warning. This is because
fiemap_fill_next_extent() could trigger a page fault when it writes
into page which triggers a page fault. If that page is mmaped from
the inline file in question, this could very well result in a
deadlock.
This problem can be reproduced using generic/519 with a file system
configuration which has the inline_data feature enabled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
In case of error, ext4_try_to_write_inline_data() should unlock
and release the page it holds.
Fixes: f19d5870cb ("ext4: add normal write support for inline data")
Cc: stable@kernel.org # 3.8
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Variable retries is not initialized in ext4_da_write_inline_data_begin()
which can lead to nondeterministic number of retries in case we hit
ENOSPC. Initialize retries to zero as we do everywhere else.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fixes: bc0ca9df3b ("ext4: retry allocation when inline->extent conversion failed")
Cc: stable@kernel.org
A specially crafted file system can trick empty_inline_dir() into
reading past the last valid entry in a inline directory, and then run
into the end of xattr marker. This will trigger a divide by zero
fault. Fix this by using the size of the inline directory instead of
dir->i_size.
Also clean up error reporting in __ext4_check_dir_entry so that the
message is clearer and more understandable --- and avoids the division
by zero trap if the size passed in is zero. (I'm not sure why we
coded it that way in the first place; printing offset % size is
actually more confusing and less useful.)
https://bugzilla.kernel.org/show_bug.cgi?id=200933
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Wen Xu <wen.xu@gatech.edu>
Cc: stable@vger.kernel.org
The inline data code was updating the raw inode directly; this is
problematic since if metadata checksums are enabled,
ext4_mark_inode_dirty() must be called to update the inode's checksum.
In addition, the jbd2 layer requires that get_write_access() be called
before the metadata buffer is modified. Fix both of these problems.
https://bugzilla.kernel.org/show_bug.cgi?id=200443
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
maliciously crafted file system image can result in a kernel OOPS or
hang. At least one fix addresses an inline data bug could be
triggered by userspace without the need of a crafted file system
(although it does require that the inline data feature be enabled).
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAltBmcYACgkQ8vlZVpUN
gaPDJgf/cEa9QuiYTbNOmcOMorK9LEk5XO8qsiJdUVNQtLsHZfl0QowbkF9/F/W5
andTJzNpFvXeLADMTTjpsDnQ90i8LKD11Kol3dPJcMhJhELtQsjxUBguxpQBP86R
dvHuCl2/AaqX7rr6Co80yYSinRCquqkzJNhdM5/MLNGziSpkQL3dPSs93rmV+YbU
8DkUwmhDhoiToLBTLaldrAsAzKvor3uyjNPJ3qhxeE2kXrnuI1V4XfstBGjhVKFB
/5aYWexDZkL5qiCo+lZnqdITqUnPx3uAkUdBn0dj7V+nDow+/R/8nApvlvJu6usF
OfMoKr098/pmPAjE5aZ8QpBNVtLFpg==
=njzR
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Bug fixes for ext4; most of which relate to vulnerabilities where a
maliciously crafted file system image can result in a kernel OOPS or
hang.
At least one fix addresses an inline data bug could be triggered by
userspace without the need of a crafted file system (although it does
require that the inline data feature be enabled)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: check superblock mapped prior to committing
ext4: add more mount time checks of the superblock
ext4: add more inode number paranoia checks
ext4: avoid running out of journal credits when appending to an inline file
jbd2: don't mark block as modified if the handle is out of credits
ext4: never move the system.data xattr out of the inode body
ext4: clear i_data in ext4_inode_info when removing inline data
ext4: include the illegal physical block in the bad map ext4_error msg
ext4: verify the depth of extent tree in ext4_find_extent()
ext4: only look at the bg_flags field if it is valid
ext4: make sure bitmaps and the inode table don't overlap with bg descriptors
ext4: always check block group bounds in ext4_init_block_bitmap()
ext4: always verify the magic number in xattr blocks
ext4: add corruption check in ext4_xattr_set_entry()
ext4: add warn_on_error mount option
Use a separate journal transaction if it turns out that we need to
convert an inline file to use an data block. Otherwise we could end
up failing due to not having journal credits.
This addresses CVE-2018-10883.
https://bugzilla.kernel.org/show_bug.cgi?id=200071
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
When converting from an inode from storing the data in-line to a data
block, ext4_destroy_inline_data_nolock() was only clearing the on-disk
copy of the i_blocks[] array. It was not clearing copy of the
i_blocks[] in ext4_inode_info, in i_data[], which is the copy actually
used by ext4_map_blocks().
This didn't matter much if we are using extents, since the extents
header would be invalid and thus the extents could would re-initialize
the extents tree. But if we are using indirect blocks, the previous
contents of the i_blocks array will be treated as block numbers, with
potentially catastrophic results to the file system integrity and/or
user data.
This gets worse if the file system is using a 1k block size and
s_first_data is zero, but even without this, the file system can get
quite badly corrupted.
This addresses CVE-2018-10881.
https://bugzilla.kernel.org/show_bug.cgi?id=200015
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
- Strengthen inode number and structure validation when allocating inodes.
- Reduce pointless buffer allocations during cache miss
- Use FUA for pure data O_DSYNC directio writes
- Various iomap refactorings
- Strengthen quota metadata verification to avoid unfixable broken quota
- Make AGFL block freeing a deferred operation to avoid blowing out
transaction reservations when running complex operations
- Get rid of the log item descriptors to reduce log overhead
- Fix various reflink bugs where inodes were double-joined to
transactions
- Don't issue discards when trimming unwritten extents
- Refactor incore dquot initialization and retrieval interfaces
- Fix some locking problmes in the quota scrub code
- Strengthen btree structure checks in scrub code
- Rewrite swapfile activation to use iomap and support unwritten extents
- Make scrub exit to userspace sooner when corruptions or
cross-referencing problems are found
- Make scrub invoke the data fork scrubber directly on metadata inodes
- Don't do background reclamation of post-eof and cow blocks when the fs
is suspended
- Fix secondary superblock buffer lifespan hinting
- Refactor growfs to use table-dispatched functions instead of long
stringy functions
- Move growfs code to libxfs
- Implement online fs label getting and setting
- Introduce online filesystem repair (in a very limited capacity)
- Fix unit conversion problems in the realtime freemap iteration
functions
- Various refactorings and cleanups in preparation to remove buffer
heads in a future release
- Reimplement the old bmap call with iomap
- Remove direct buffer head accesses from seek hole/data
- Various bug fixes
-----BEGIN PGP SIGNATURE-----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=11pr
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.18-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"New features this cycle include the ability to relabel mounted
filesystems, support for fallocated swapfiles, and using FUA for pure
data O_DSYNC directio writes. With this cycle we begin to integrate
online filesystem repair and refactor the growfs code in preparation
for eventual subvolume support, though the road ahead for both
features is quite long.
There are also numerous refactorings of the iomap code to remove
unnecessary log overhead, to disentangle some of the quota code, and
to prepare for buffer head removal in a future upstream kernel.
Metadata validation continues to improve, both in the hot path
veifiers and the online filesystem check code. I anticipate sending a
second pull request in a few days with more metadata validation
improvements.
This series has been run through a full xfstests run over the weekend
and through a quick xfstests run against this morning's master, with
no major failures reported.
Summary:
- Strengthen inode number and structure validation when allocating
inodes.
- Reduce pointless buffer allocations during cache miss
- Use FUA for pure data O_DSYNC directio writes
- Various iomap refactorings
- Strengthen quota metadata verification to avoid unfixable broken
quota
- Make AGFL block freeing a deferred operation to avoid blowing out
transaction reservations when running complex operations
- Get rid of the log item descriptors to reduce log overhead
- Fix various reflink bugs where inodes were double-joined to
transactions
- Don't issue discards when trimming unwritten extents
- Refactor incore dquot initialization and retrieval interfaces
- Fix some locking problmes in the quota scrub code
- Strengthen btree structure checks in scrub code
- Rewrite swapfile activation to use iomap and support unwritten
extents
- Make scrub exit to userspace sooner when corruptions or
cross-referencing problems are found
- Make scrub invoke the data fork scrubber directly on metadata
inodes
- Don't do background reclamation of post-eof and cow blocks when the
fs is suspended
- Fix secondary superblock buffer lifespan hinting
- Refactor growfs to use table-dispatched functions instead of long
stringy functions
- Move growfs code to libxfs
- Implement online fs label getting and setting
- Introduce online filesystem repair (in a very limited capacity)
- Fix unit conversion problems in the realtime freemap iteration
functions
- Various refactorings and cleanups in preparation to remove buffer
heads in a future release
- Reimplement the old bmap call with iomap
- Remove direct buffer head accesses from seek hole/data
- Various bug fixes"
* tag 'xfs-4.18-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (121 commits)
fs: use ->is_partially_uptodate in page_cache_seek_hole_data
fs: remove the buffer_unwritten check in page_seek_hole_data
fs: move page_cache_seek_hole_data to iomap.c
xfs: use iomap_bmap
iomap: add an iomap-based bmap implementation
iomap: add a iomap_sector helper
iomap: use __bio_add_page in iomap_dio_zero
iomap: move IOMAP_F_BOUNDARY to gfs2
iomap: fix the comment describing IOMAP_NOWAIT
iomap: inline data should be an iomap type, not a flag
mm: split ->readpages calls to avoid non-contiguous pages lists
mm: return an unsigned int from __do_page_cache_readahead
mm: give the 'ret' variable a better name __do_page_cache_readahead
block: add a lower-level bio_add_page interface
xfs: fix error handling in xfs_refcount_insert()
xfs: fix xfs_rtalloc_rec units
xfs: strengthen rtalloc query range checks
xfs: xfs_rtbuf_get should check the bmapi_read results
xfs: xfs_rtword_t should be unsigned, not signed
dax: change bdev_dax_supported() to support boolean returns
...
Inline data is fundamentally different from our normal mapped case in that
it doesn't even have a block address. So instead of having a flag for it
it should be an entirely separate iomap range type.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The inline data feature was implemented before we added support for
external inodes for xattrs. It makes no sense to support that
combination, but the problem is that there are a number of extended
attribute checks that are skipped if e_value_inum is non-zero.
Unfortunately, the inline data code is completely e_value_inum
unaware, and attempts to interpret the xattr fields as if it were an
inline xattr --- at which point, Hilarty Ensues.
This addresses CVE-2018-11412.
https://bugzilla.kernel.org/show_bug.cgi?id=199803
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fixes: e50e5129f3 ("ext4: xattr-in-inode support")
Cc: stable@kernel.org
-----BEGIN PGP SIGNATURE-----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=iEKM
-----END PGP SIGNATURE-----
Merge tag 'iversion-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull inode->i_version cleanup from Jeff Layton:
"Goffredo went ahead and sent a patch to rename this function, and
reverse its sense, as we discussed last week.
The patch is very straightforward and I figure it's probably best to
go ahead and merge this to get the API as settled as possible"
* tag 'iversion-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
iversion: Rename make inode_cmp_iversion{+raw} to inode_eq_iversion{+raw}
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlp16xMACgkQ8vlZVpUN
gaP1IAf8C48AKVnqy6ftFphzV1CdeGHDwJLL63lChs97fNr1mxo5TZE/6vdYB55j
k7C7huQ582cEiGWQJ0U4/+En0hF85zkAk5mTfnSao5BqxLr9ANsAocwBUNBXdFSp
B7IyMo4Dct7NCkwfmKLPRcEqZ49vwyv99TqM/9wUkgUStkTjPT7bhHgarB6VPbhp
BxoXVnFYgU0sZN0y71IBt8ngWqCK6j7fjw3gsl37oEenG3/h3SO0H9ih1FrysX8S
VOwwLJq6vfAgEwQvZACnBwWKDYsZpH7akNp9WGeDMByo28t514RNRjIi0mvLHEZa
h72I8Sb3bwHO9MJNvHFe/0b1Say4vw==
=dxAX
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Only miscellaneous cleanups and bug fixes for ext4 this cycle"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: create ext4_kset dynamically
ext4: create ext4_feat kobject dynamically
ext4: release kobject/kset even when init/register fail
ext4: fix incorrect indentation of if statement
ext4: correct documentation for grpid mount option
ext4: use 'sbi' instead of 'EXT4_SB(sb)'
ext4: save error to disk in __ext4_grp_locked_error()
jbd2: fix sphinx kernel-doc build warnings
ext4: fix a race in the ext4 shutdown path
mbcache: make sure c_entry_count is not decremented past zero
ext4: no need flush workqueue before destroying it
ext4: fixed alignment and minor code cleanup in ext4.h
ext4: fix ENOSPC handling in DAX page fault handler
dax: pass detailed error code from dax_iomap_fault()
mbcache: revert "fs/mbcache.c: make count_objects() more robust"
mbcache: initialize entry->e_referenced in mb_cache_entry_create()
ext4: fix up remaining files with SPDX cleanups
The function inode_cmp_iversion{+raw} is counter-intuitive, because it
returns true when the counters are different and false when these are equal.
Rename it to inode_eq_iversion{+raw}, which will returns true when
the counters are equal and false otherwise.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
A number of ext4 source files were skipped due because their copyright
permission statements didn't match the expected text used by the
automated conversion utilities. I've added SPDX tags for the rest.
While looking at some of these files, I've noticed that we have quite
a bit of variation on the licenses that were used --- in particular
some of the Red Hat licenses on the jbd2 files use a GPL2+ license,
and we have some files that have a LGPL-2.1 license (which was quite
surprising).
I've not attempted to do any license changes. Even if it is perfectly
legal to relicense to GPL 2.0-only for consistency's sake, that should
be done with ext4 developer community discussion.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If an inode has inline data it is currently prevented from using DAX by a
check in ext4_set_inode_flags(). When the inode grows inline data via
ext4_create_inline_data() or removes its inline data via
ext4_destroy_inline_data_nolock(), the value of S_DAX can change.
Currently these changes are unsafe because we don't hold off page faults
and I/O, write back dirty radix tree entries and invalidate all mappings.
There are also issues with mm-level races when changing the value of S_DAX,
as well as issues with the VM_MIXEDMAP flag:
https://www.spinics.net/lists/linux-xfs/msg09859.html
The unsafe transition of S_DAX can reliably cause data corruption, as shown
by the following fstest:
https://patchwork.kernel.org/patch/9948381/
Fix this issue by preventing the DAX mount option from being used on
filesystems that were created to support inline data. Inline data is an
option given to mkfs.ext4.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
CC: stable@vger.kernel.org
Report inline data as a IOMAP_F_DATA_INLINE mapping. This allows to use
iomap_seek_hole and iomap_seek_data in ext4_llseek and makes switching
to iomap_fiemap in ext4_fiemap easier.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Large xattr support is implemented for EXT4_FEATURE_INCOMPAT_EA_INODE.
If the size of an xattr value is larger than will fit in a single
external block, then the xattr value will be saved into the body
of an external xattr inode.
The also helps support a larger number of xattr, since only the headers
will be stored in the in-inode space or the single external block.
The inode is referenced from the xattr header via "e_value_inum",
which was formerly "e_value_block", but that field was never used.
The e_value_size still contains the xattr size so that listing
xattrs does not need to look up the inode if the data is not accessed.
struct ext4_xattr_entry {
__u8 e_name_len; /* length of name */
__u8 e_name_index; /* attribute name index */
__le16 e_value_offs; /* offset in disk block of value */
__le32 e_value_inum; /* inode in which value is stored */
__le32 e_value_size; /* size of attribute value */
__le32 e_hash; /* hash value of name and value */
char e_name[0]; /* attribute name */
};
The xattr inode is marked with the EXT4_EA_INODE_FL flag and also
holds a back-reference to the owning inode in its i_mtime field,
allowing the ext4/e2fsck to verify the correct inode is accessed.
[ Applied fix by Dan Carpenter to avoid freeing an ERR_PTR. ]
Lustre-Jira: https://jira.hpdd.intel.com/browse/LU-80
Lustre-bugzilla: https://bugzilla.lustre.org/show_bug.cgi?id=4424
Signed-off-by: Kalpak Shah <kalpak.shah@sun.com>
Signed-off-by: James Simmons <uja.ornl@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Now that we are passing a struct ext4_filename, we do not need to pass
around the original struct qstr too.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
In the initial implementation of ext4 encryption, the filename was
encrypted in ext4_insert_dentry(), which could fail and also required
access to the 'dir' inode. Since then ext4 filename encryption has been
changed to encrypt the filename earlier, so we can revert the additions
to ext4_insert_dentry().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If ext4_convert_inline_data() was called on a directory with inline
data, the filesystem was left in an inconsistent state (as considered by
e2fsck) because the file size was not increased to cover the new block.
This happened because the inode was not marked dirty after i_disksize
was updated. Fix this by marking the inode dirty at the end of
ext4_finish_convert_inline_dir().
This bug was probably not noticed before because most users mark the
inode dirty afterwards for other reasons. But if userspace executed
FS_IOC_SET_ENCRYPTION_POLICY with invalid parameters, as exercised by
'kvm-xfstests -c adv generic/396', then the inode was never marked dirty
after updating i_disksize.
Cc: stable@vger.kernel.org # 3.10+
Fixes: 3c47d54170
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The write_end() function must always unlock the page and drop its ref
count, even on an error.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
There is no need to call ext4_mark_inode_dirty while holding xattr_sem
or i_data_sem, so where it's easy to avoid it, move it out from the
critical region.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We should set the error code if kzalloc() fails.
Fixes: 67cf5b09a4 ("ext4: add the basic function for inline data support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Currently we have S_DAX set inode->i_flags for a regular file whenever
ext4 is mounted with dax mount option. However in some cases we cannot
really do DAX - e.g. when inode is marked to use data journalling, when
inode data is being encrypted, or when inode is stored inline. Make sure
S_DAX flag is appropriately set/cleared in these cases.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
CURRENT_TIME_SEC and CURRENT_TIME are not y2038 safe.
current_time() will be transitioned to be y2038 safe
along with vfs.
current_time() returns timestamps according to the
granularities set in the super_block.
The granularity check in ext4_current_time() to call
current_time() or CURRENT_TIME_SEC is not required.
Use current_time() directly to obtain timestamps
unconditionally, and remove ext4_current_time().
Quota files are assumed to be on the same filesystem.
Hence, use current_time() for these files as well.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
This patch removes the most parts of internal crypto codes.
And then, it modifies and adds some ext4-specific crypt codes to use the generic
facility.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Messages passed to ext4_warning() or ext4_error() don't need trailing
newlines, because these function add the newlines themselves.
Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
BUFFER_TRACE info "call ext4_handle_dirty_metadata" doesn't match the
code, so drop it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Rename ext4_get_blocks_write() to ext4_get_blocks_unwritten() to better
describe what it does. Also split out get blocks functions for direct
IO. Later we move functionality from _ext4_get_blocks() there. There's no
functional change in this patch.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A number of functions include ext4_add_dx_entry, make_indexed_dir,
etc. are being passed a dentry even though the only thing they use is
the containing parent. We can shrink the code size slightly by making
this replacement. This will also be useful in cases where we don't
have a dentry as the argument to the directory entry insert functions.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros. Furthermore, clean out the
places where we open-coded feature tests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Encrypt the filename as soon it is passed in by the user. This avoids
our needing to encrypt the filename 2 or 3 times while in the process
of creating a filename.
Similarly, when looking up a directory entry, encrypt the filename
early, or if the encryption key is not available, base-64 decode the
file syystem so that the hash value and the last 16 bytes of the
encrypted filename is available in the new struct ext4_filename data
structure.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
