The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
The fragment packets do defrag in tcf_ct_handle_fragments
will clear the skb->cb which make the qdisc_skb_cb clear
too. So the qdsic_skb_cb should be store before defrag and
restore after that.
It also update the pkt_len after all the
fragments finish the defrag to one packet and make the
following actions counter correct.
Fixes: b57dc7c13e ("net/sched: Introduce action ct")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
When tcf_ct_act execute the tcf_lastuse_update should
be update or the used stats never update
filter protocol ip pref 3 flower chain 0
filter protocol ip pref 3 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 1.1.1.1
ip_flags frag/firstfrag
skip_hw
not_in_hw
action order 1: ct zone 1 nat pipe
index 1 ref 1 bind 1 installed 103 sec used 103 sec
Action statistics:
Sent 151500 bytes 101 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
cookie 4519c04dc64a1a295787aab13b6a50fb
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a couple of places in net/sched/ that check skb->protocol and act
on the value there. However, in the presence of VLAN tags, the value stored
in skb->protocol can be inconsistent based on whether VLAN acceleration is
enabled. The commit quoted in the Fixes tag below fixed the users of
skb->protocol to use a helper that will always see the VLAN ethertype.
However, most of the callers don't actually handle the VLAN ethertype, but
expect to find the IP header type in the protocol field. This means that
things like changing the ECN field, or parsing diffserv values, stops
working if there's a VLAN tag, or if there are multiple nested VLAN
tags (QinQ).
To fix this, change the helper to take an argument that indicates whether
the caller wants to skip the VLAN tags or not. When skipping VLAN tags, we
make sure to skip all of them, so behaviour is consistent even in QinQ
mode.
To make the helper usable from the ECN code, move it to if_vlan.h instead
of pkt_sched.h.
v3:
- Remove empty lines
- Move vlan variable definitions inside loop in skb_protocol()
- Also use skb_protocol() helper in IP{,6}_ECN_decapsulate() and
bpf_skb_ecn_set_ce()
v2:
- Use eth_type_vlan() helper in skb_protocol()
- Also fix code that reads skb->protocol directly
- Change a couple of 'if/else if' statements to switch constructs to avoid
calling the helper twice
Reported-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
Fixes: d8b9605d26 ("net: sched: fix skb->protocol use in case of accelerated vlan path")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a drop frames counter to tc flower offloading.
Reporting h/w dropped frames is necessary for some actions.
Some actions like police action and the coming introduced stream gate
action would produce dropped frames which is necessary for user. Status
update shows how many filtered packets increasing and how many dropped
in those packets.
v2: Changes
- Update commit comments suggest by Jiri Pirko.
Signed-off-by: Po Liu <Po.Liu@nxp.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, tcf_ct_flow_table_restore_skb is exported by act_ct
module, therefore modules using it will have hard-dependency
on act_ct and will require loading it all the time.
This can lead to an unnecessary overhead on systems that do not
use hardware connection tracking action (ct_metadata action) in
the first place.
To relax the hard-dependency between the modules, we unexport this
function and make it a static inline one.
Fixes: 30b0cf90c6 ("net/sched: act_ct: Support restoring conntrack info on skbs")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently add nat mangle action with comparing invert and orig tuple.
It is better to check IPS_NAT_MASK flags first to avoid non necessary
memcmp for non-NAT conntrack.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the act_ct SW offload in flowtable, The counter of the conntrack
entry will never update. So update the nf_conn_acct conuter in act_ct
flowtable software offload.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Overlapping header include additions in macsec.c
A bug fix in 'net' overlapping with the removal of 'version'
string in ena_netdev.c
Overlapping test additions in selftests Makefile
Overlapping PCI ID table adjustments in iwlwifi driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, on replace, the previous action instance params
is swapped with a newly allocated params. The old params is
only freed (via kfree_rcu), without releasing the allocated
ct zone template related to it.
Call tcf_ct_params_free (via call_rcu) for the old params,
so it will release it.
Fixes: b57dc7c13e ("net/sched: Introduce action ct")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the zone's flow table instance on the flow action to the drivers.
Thus, allowing drivers to register FT add/del/stats callbacks.
Finally, enable hardware offload on the flow table instance.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If driver deleted an FT entry, a FT failed to offload, or registered to the
flow table after flows were already added, we still get packets in
software.
For those packets, while restoring the ct state from the flow table
entry, refresh it's hardware offload.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide an API to restore the ct state pointer.
This may be used by drivers to restore the ct state if they
miss in tc chain after they already did the hardware connection
tracking action (ct_metadata action).
For example, consider the following rule on chain 0 that is in_hw,
however chain 1 is not_in_hw:
$ tc filter add dev ... chain 0 ... \
flower ... action ct pipe action goto chain 1
Packets of a flow offloaded (via nf flow table offload) by the driver
hit this rule in hardware, will be marked with the ct metadata action
(mark, label, zone) that does the equivalent of the software ct action,
and when the packet jumps to hardware chain 1, there would be a miss.
CT was already processed in hardware. Therefore, the driver's miss
handling should restore the ct state on the skb, using the provided API,
and continue the packet processing in chain 1.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NF flow table API associate 5-tuple rule with an action list by calling
the flow table type action() CB to fill the rule's actions.
In action CB of act_ct, populate the ct offload entry actions with a new
ct_metadata action. Initialize the ct_metadata with the ct mark, label and
zone information. If ct nat was performed, then also append the relevant
packet mangle actions (e.g. ipv4/ipv6/tcp/udp header rewrites).
Drivers that offload the ft entries may match on the 5-tuple and perform
the action list.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To make the filler functions more generic, use network
relative skb pulling.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When checking the protocol number tcf_ct_flow_table_lookup() handles
the flow as if it's always ipv4, while it can be ipv6.
Instead, refactor the code to fetch the tcp header, if available,
in the relevant family (ipv4/ipv6) filler function, and do the
check on the returned tcp header.
Fixes: 46475bb20f ("net/sched: act_ct: Software offload of established flows")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Offload nf conntrack processing by looking up the 5-tuple in the
zone's flow table.
The nf conntrack module will process the packets until a connection is
in established state. Once in established state, the ct state pointer
(nf_conn) will be restored on the skb from a successful ft lookup.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a ft entry when connections enter an established state and delete
the connections when they leave the established state.
The flow table assumes ownership of the connection. In the following
patch act_ct will lookup the ct state from the FT. In future patches,
drivers will register for callbacks for ft add/del events and will be
able to use the information to offload the connections.
Note that connection aging is managed by the FT.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the NF flow tables infrastructure for CT offload.
Create a nf flow table per zone.
Next patches will add FT entries to this table, and do
the software offload.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().
This patch is generated using following script:
EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"
git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do
if [[ "$file" =~ $EXCLUDE_FILES ]]; then
continue
fi
sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net
The act_ct TC module shares a common conntrack and NAT infrastructure
exposed via netfilter. It's possible that a packet needs both SNAT and
DNAT manipulation, due to e.g. tuple collision. Netfilter can support
this because it runs through the NAT table twice - once on ingress and
again after egress. The act_ct action doesn't have such capability.
Like netfilter hook infrastructure, we should run through NAT twice to
keep the symmetry.
Fixes: b57dc7c13e ("net/sched: Introduce action ct")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle were:
- Dynamic tick (nohz) updates, perhaps most notably changes to force
the tick on when needed due to lengthy in-kernel execution on CPUs
on which RCU is waiting.
- Linux-kernel memory consistency model updates.
- Replace rcu_swap_protected() with rcu_prepace_pointer().
- Torture-test updates.
- Documentation updates.
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
security/safesetid: Replace rcu_swap_protected() with rcu_replace_pointer()
net/sched: Replace rcu_swap_protected() with rcu_replace_pointer()
net/netfilter: Replace rcu_swap_protected() with rcu_replace_pointer()
net/core: Replace rcu_swap_protected() with rcu_replace_pointer()
bpf/cgroup: Replace rcu_swap_protected() with rcu_replace_pointer()
fs/afs: Replace rcu_swap_protected() with rcu_replace_pointer()
drivers/scsi: Replace rcu_swap_protected() with rcu_replace_pointer()
drm/i915: Replace rcu_swap_protected() with rcu_replace_pointer()
x86/kvm/pmu: Replace rcu_swap_protected() with rcu_replace_pointer()
rcu: Upgrade rcu_swap_protected() to rcu_replace_pointer()
rcu: Suppress levelspread uninitialized messages
rcu: Fix uninitialized variable in nocb_gp_wait()
rcu: Update descriptions for rcu_future_grace_period tracepoint
rcu: Update descriptions for rcu_nocb_wake tracepoint
rcu: Remove obsolete descriptions for rcu_barrier tracepoint
rcu: Ensure that ->rcu_urgent_qs is set before resched IPI
workqueue: Convert for_each_wq to use built-in list check
rcu: Several rcu_segcblist functions can be static
rcu: Remove unused function hlist_bl_del_init_rcu()
Documentation: Rename rcu_node_context_switch() to rcu_note_context_switch()
...
ct_policy and mpls_policy are parsed with nla_parse_nested(), which
does NL_VALIDATE_STRICT validation, strict_start_type is not needed
to set as it is actually trying to make some attributes parsed with
NL_VALIDATE_STRICT.
This patch is to remove it, and do the same on rtm_nh_policy which
is parsed by nlmsg_parse().
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend struct tc_action with new "tcfa_flags" field. Set the field in
tcf_idr_create() function and provide new helper
tcf_idr_create_from_flags() that derives 'cpustats' boolean from flags
value. Update individual hardware-offloaded actions init() to pass their
"flags" argument to new helper in order to skip percpu stats allocation
when user requested it through flags.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend TCA_ACT space with nla_bitfield32 flags. Add
TCA_ACT_FLAGS_NO_PERCPU_STATS as the only allowed flag. Parse the flags in
tcf_action_init_1() and pass resulting value as additional argument to
a_o->init().
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract common code that increments cpu_qstats counters into standalone act
API functions. Change hardware offloaded actions that use percpu counter
allocation to use the new functions instead of accessing cpu_qstats
directly.
This commit doesn't change functionality.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract common code that increments cpu_bstats counter into standalone act
API function. Change hardware offloaded actions that use percpu counter
allocation to use the new function instead of incrementing cpu_bstats
directly.
This commit doesn't change functionality.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, all implementations of tc_action_ops->stats_update() callback
have almost exactly the same implementation of counters update
code (besides gact which also updates drop counter). In order to simplify
support for using both percpu-allocated and regular action counters
depending on run-time flag in following patches, extract action counters
update code into standalone function in act API.
This commit doesn't change functionality.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit replaces the use of rcu_swap_protected() with the more
intuitively appealing rcu_replace_pointer() as a step towards removing
rcu_swap_protected().
Link: https://lore.kernel.org/lkml/CAHk-=wiAsJLw1egFEE=Z7-GGtM6wcvtyytXZA1+BHqta4gg6Hw@mail.gmail.com/
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
[ paulmck: From rcu_replace() to rcu_replace_pointer() per Ingo Molnar. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Include some headers in files which require them, and remove others
which are not required.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The net pointer in struct xt_tgdtor_param is not explicitly
initialized therefore is still NULL when dereferencing it.
So we have to find a way to pass the correct net pointer to
ipt_destroy_target().
The best way I find is just saving the net pointer inside the per
netns struct tcf_idrinfo, which could make this patch smaller.
Fixes: 0c66dc1ea3 ("netfilter: conntrack: register hooks in netns when needed by ruleset")
Reported-and-tested-by: itugrok@yahoo.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently init call of all actions (except ipt) init their 'parm'
structure as a direct pointer to nla data in skb. This leads to race
condition when some of the filter actions were initialized successfully
(and were assigned with idr action index that was written directly
into nla data), but then were deleted and retried (due to following
action module missing or classifier-initiated retry), in which case
action init code tries to insert action to idr with index that was
assigned on previous iteration. During retry the index can be reused
by another action that was inserted concurrently, which causes
unintended action sharing between filters.
To fix described race condition, save action idr index to temporary
stack-allocated variable instead on nla data.
Fixes: 0190c1d452 ("net: sched: atomically check-allocate action")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow sending a packet to conntrack module for connection tracking.
The packet will be marked with conntrack connection's state, and
any metadata such as conntrack mark and label. This state metadata
can later be matched against with tc classifers, for example with the
flower classifier as below.
In addition to committing new connections the user can optionally
specific a zone to track within, set a mark/label and configure nat
with an address range and port range.
Usage is as follows:
$ tc qdisc add dev ens1f0_0 ingress
$ tc qdisc add dev ens1f0_1 ingress
$ tc filter add dev ens1f0_0 ingress \
prio 1 chain 0 proto ip \
flower ip_proto tcp ct_state -trk \
action ct zone 2 pipe \
action goto chain 2
$ tc filter add dev ens1f0_0 ingress \
prio 1 chain 2 proto ip \
flower ct_state +trk+new \
action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \
action mirred egress redirect dev ens1f0_1
$ tc filter add dev ens1f0_0 ingress \
prio 1 chain 2 proto ip \
flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \
action ct nat pipe \
action mirred egress redirect dev ens1f0_1
$ tc filter add dev ens1f0_1 ingress \
prio 1 chain 0 proto ip \
flower ip_proto tcp ct_state -trk \
action ct zone 2 pipe \
action goto chain 1
$ tc filter add dev ens1f0_1 ingress \
prio 1 chain 1 proto ip \
flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \
action ct nat pipe \
action mirred egress redirect dev ens1f0_0
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Changelog:
V5->V6:
Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case
V4->V5:
Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached()
V3->V4:
Added strict_start_type for act_ct policy
V2->V3:
Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c
V1->V2:
Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max
Refactored NAT_PORT_MIN_MAX range handling as well
Added ipv4/ipv6 defragmentation
Removed extra skb pull push of nw offset in exectute nat
Refactored tcf_ct_skb_network_trim after pull
Removed TCA_ACT_CT define
Signed-off-by: David S. Miller <davem@davemloft.net>
