Every time we log an inode we lookup in the fs/subvol tree for xattrs and
if we have any, log them into the log tree. However it is very common to
have inodes without any xattrs, so doing the search wastes times, but more
importantly it adds contention on the fs/subvol tree locks, either making
the logging code block and wait for tree locks or making the logging code
making other concurrent operations block and wait.
The most typical use cases where xattrs are used are when capabilities or
ACLs are defined for an inode, or when SELinux is enabled.
This change makes the logging code detect when an inode does not have
xattrs and skip the xattrs search the next time the inode is logged,
unless the inode is evicted and loaded again or a xattr is added to the
inode. Therefore skipping the search for xattrs on inodes that don't ever
have xattrs and are fsynced with some frequency.
The following script that calls dbench was used to measure the impact of
this change on a VM with 8 CPUs, 16Gb of ram, using a raw NVMe device
directly (no intermediary filesystem on the host) and using a non-debug
kernel (default configuration on Debian distributions):
$ cat test.sh
#!/bin/bash
DEV=/dev/sdk
MNT=/mnt/sdk
MOUNT_OPTIONS="-o ssd"
mkfs.btrfs -f -m single -d single $DEV
mount $MOUNT_OPTIONS $DEV $MNT
dbench -D $MNT -t 200 40
umount $MNT
The results before this change:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 5761605 0.172 312.057
Close 4232452 0.002 10.927
Rename 243937 1.406 277.344
Unlink 1163456 0.631 298.402
Deltree 160 11.581 221.107
Mkdir 80 0.003 0.005
Qpathinfo 5221410 0.065 122.309
Qfileinfo 915432 0.001 3.333
Qfsinfo 957555 0.003 3.992
Sfileinfo 469244 0.023 20.494
Find 2018865 0.448 123.659
WriteX 2874851 0.049 118.529
ReadX 9030579 0.004 21.654
LockX 18754 0.003 4.423
UnlockX 18754 0.002 0.331
Flush 403792 10.944 359.494
Throughput 908.444 MB/sec 40 clients 40 procs max_latency=359.500 ms
The results after this change:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 6442521 0.159 230.693
Close 4732357 0.002 10.972
Rename 272809 1.293 227.398
Unlink 1301059 0.563 218.500
Deltree 160 7.796 54.887
Mkdir 80 0.008 0.478
Qpathinfo 5839452 0.047 124.330
Qfileinfo 1023199 0.001 4.996
Qfsinfo 1070760 0.003 5.709
Sfileinfo 524790 0.033 21.765
Find 2257658 0.314 125.611
WriteX 3211520 0.040 232.135
ReadX 10098969 0.004 25.340
LockX 20974 0.003 1.569
UnlockX 20974 0.002 3.475
Flush 451553 10.287 331.037
Throughput 1011.77 MB/sec 40 clients 40 procs max_latency=331.045 ms
+10.8% throughput, -8.2% max latency
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After the recent series of cleanups in the properties and xattrs modules
that landed in the 5.2 merge window, we ended up with a regression where
after deleting the compression xattr property through the setflags ioctl,
we don't set the BTRFS_INODE_COPY_EVERYTHING flag in the inode anymore.
As a consequence, if the inode was fsync'ed when it had the compression
property set, after deleting the compression property through the setflags
ioctl and fsync'ing again the inode, the log will still contain the
compression xattr, because the inode did not had that bit set, which
made the fsync not delete all xattrs from the log and copy all xattrs
from the subvolume tree to the log tree.
This regression happens due to the fact that that series of cleanups
made btrfs_set_prop() call the old function do_setxattr() (which is now
named btrfs_setxattr()), and not the old version of btrfs_setxattr(),
which is now called btrfs_setxattr_trans().
Fix this by setting the BTRFS_INODE_COPY_EVERYTHING bit in the current
btrfs_setxattr() function and remove it from everywhere else, including
its setup at btrfs_ioctl_setflags(). This is cleaner, avoids similar
regressions in the future, and centralizes the setup of the bit. After
all, the need to setup this bit should only be in the xattrs module,
since it is an implementation of xattrs.
Fixes: 04e6863b19 ("btrfs: split btrfs_setxattr calls regarding transaction")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs specific extended attributes on the inode are set using
btrfs_xattr_handler_set_prop(), and the required transaction for this
update is started by btrfs_setxattr(). For better visibility of the
transaction start and end, do this in btrfs_xattr_handler_set_prop().
For which this patch copied code of btrfs_setxattr() as it is in the
original, which needs proper error handling.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In preparation to merge multiple transactions when setting the
compression flags, split btrfs_set_props() validation part outside of
it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previous patch made sure that btrfs_setxattr_trans() is called only when
transaction NULL. Clean up btrfs_setxattr_trans() and drop the
parameter.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When the caller has already created the transaction handle,
btrfs_setxattr() will use it. Also adds assert in btrfs_setxattr().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_setxattr_trans() is called by 5 functions as below and all of them
do updates. None of them would be roun on a read-only root.
So its ok to remove the readonly root check here as it's a high-level
conditon.
1.
__btrfs_set_acl()
btrfs_init_acl()
btrfs_init_inode_security()
2.
__btrfs_set_acl()
btrfs_set_acl()
3.
btrfs_set_prop()
btrfs_set_prop_trans()
/ \
btrfs_ioctl_setflags() btrfs_xattr_handler_set_prop()
4.
btrfs_xattr_handler_set()
5.
btrfs_initxattrs()
btrfs_xattr_security_init()
btrfs_init_inode_security()
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Preparatory patch, as we are going split the calls with and without
transaction to use the respective btrfs_setxattr() and
btrfs_setxattr_trans() functions. Export btrfs_setxattr() for calls
outside of xattr.c.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When trans is not NULL btrfs_setxattr() calls do_setxattr() directly
with a check for readonly root. Rename do_setxattr() btrfs_setxattr() in
preparation to call do_setxattr() directly instead. Preparatory patch,
no functional changes.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rename btrfs_setxattr() to btrfs_setxattr_trans(), so that do_setxattr()
can be renamed to btrfs_setxattr().
Preparatory patch, no functional changes.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_set_prop() takes transaction pointer as the first argument,
however in ioctl.c for the purpose of setting the compression property,
we call btrfs_set_prop() with NULL transaction pointer. Down in
the call chain btrfs_setxattr() starts transaction to update the
attribute and also to update the inode.
So for clarity, create btrfs_set_prop_trans() with no transaction
pointer as argument, in preparation to start transaction here instead of
doing it down the call chain at btrfs_setxattr().
Also now the btrfs_set_prop() is a static function.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
fs_info is commonly used to represent struct fs_info *, rename
to fs_private to avoid confusion.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_set_prop() is a redirect to __btrfs_set_prop() with the
transaction handle equal to NULL. __btrfs_set_prop() in turn passes
this to do_setxattr() which then transaction is actually created.
Instead merge __btrfs_set_prop() to btrfs_set_prop(), and update the
caller with NULL argument.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When initializing the security xattrs, we are holding a transaction handle
therefore we need to use a GFP_NOFS context in order to avoid a deadlock
with reclaim in case it's triggered.
Fixes: 39a27ec100 ("btrfs: use GFP_KERNEL for xattr and acl allocations")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove GPL boilerplate text (long, short, one-line) and keep the rest,
ie. personal, company or original source copyright statements. Add the
SPDX header.
Signed-off-by: David Sterba <dsterba@suse.com>
The xattr_handler::get prototype returns int, use it. The only ssize_t
exception is the per-inode listxattr handler.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=Irul
-----END PGP SIGNATURE-----
Merge tag 'for-4.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Features or user visible changes:
- fallocate: implement zero range mode
- avoid losing data raid profile when deleting a device
- tree item checker: more checks for directory items and xattrs
Notable fixes:
- raid56 recovery: don't use cached stripes, that could be
potentially changed and a later RMW or recovery would lead to
corruptions or failures
- let raid56 try harder to rebuild damaged data, reading from all
stripes if necessary
- fix scrub to repair raid56 in a similar way as in the case above
Other:
- cleanups: device freeing, removed some call indirections, redundant
bio_put/_get, unused parameters, refactorings and renames
- RCU list traversal fixups
- simplify mount callchain, remove recursing back when mounting a
subvolume
- plug for fsync, may improve bio merging on multiple devices
- compression heurisic: replace heap sort with radix sort, gains some
performance
- add extent map selftests, buffered write vs dio"
* tag 'for-4.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (155 commits)
btrfs: drop devid as device_list_add() arg
btrfs: get device pointer from device_list_add()
btrfs: set the total_devices in device_list_add()
btrfs: move pr_info into device_list_add
btrfs: make btrfs_free_stale_devices() to match the path
btrfs: rename btrfs_free_stale_devices() arg to skip_dev
btrfs: make btrfs_free_stale_devices() argument optional
btrfs: make btrfs_free_stale_device() to iterate all stales
btrfs: no need to check for btrfs_fs_devices::seeding
btrfs: Use IS_ALIGNED in btrfs_truncate_block instead of opencoding it
Btrfs: noinline merge_extent_mapping
Btrfs: add WARN_ONCE to detect unexpected error from merge_extent_mapping
Btrfs: extent map selftest: dio write vs dio read
Btrfs: extent map selftest: buffered write vs dio read
Btrfs: add extent map selftests
Btrfs: move extent map specific code to extent_map.c
Btrfs: add helper for em merge logic
Btrfs: fix unexpected EEXIST from btrfs_get_extent
Btrfs: fix incorrect block_len in merge_extent_mapping
btrfs: Remove unused readahead spinlock
...
Add a documentation blob that explains what the i_version field is, how
it is expected to work, and how it is currently implemented by various
filesystems.
We already have inode_inc_iversion. Add several other functions for
manipulating and accessing the i_version counter. For now, the
implementation is trivial and basically works the way that all of the
open-coded i_version accesses work today.
Future patches will convert existing users of i_version to use the new
API, and then convert the backend implementation to do things more
efficiently.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Since tree-checker has verified leaf when reading from disk, we don't
need the existing verify_dir_item() or btrfs_is_name_len_valid() checks.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_ino takes a struct inode and this causes a lot of
internal btrfs functions which consume this ino to take a VFS inode,
rather than btrfs' own struct btrfs_inode. In order to fix this "leak"
of VFS structs into the internals of btrfs first it's necessary to
eliminate all uses of struct inode for the purpose of inode. This patch
does that by using BTRFS_I to convert an inode to btrfs_inode. With
this problem eliminated subsequent patches will start eliminating the
passing of struct inode altogether, eventually resulting in a lot cleaner
code.
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
[ fix btrfs_get_extent tracepoint prototype ]
Signed-off-by: David Sterba <dsterba@suse.com>
Now we only use the root parameter to print the root objectid in
a tracepoint. We can use the root parameter from the transaction
handle for that. It's also used to join the transaction with
async commits, so we remove the comment that it's just for checking.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are loads of functions in btrfs that accept a root parameter
but only use it to obtain an fs_info pointer. Let's convert those to
just accept an fs_info pointer directly.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We track the node sizes per-root, but they never vary from the values
in the superblock. This patch messes with the 80-column style a bit,
but subsequent patches to factor out root->fs_info into a convenience
variable fix it up again.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
current_fs_time() uses struct super_block* as an argument.
As per Linus's suggestion, this is changed to take struct
inode* as a parameter instead. This is because the function
is primarily meant for vfs inode timestamps.
Also the function was renamed as per Arnd's suggestion.
Change all calls to current_fs_time() to use the new
current_time() function instead. current_fs_time() will be
deleted.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The btrfs_{set,remove}xattr inode operations check for a read-only root
(btrfs_root_readonly) before calling into generic_{set,remove}xattr. If
this check is moved into __btrfs_setxattr, we can get rid of
btrfs_{set,remove}xattr.
This patch applies to mainline, I would like to keep it together with
the other xattr cleanups if possible, though. Could you please review?
Thanks,
Andreas
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In the listxattrs handler, we were not listing all the xattrs that are
packed in the same btree item, which happens when multiple xattrs have
a name that when crc32c hashed produce the same checksum value.
Fix this by processing them all.
The following test case for xfstests reproduces the issue:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
cd /
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/attr
# real QA test starts here
_supported_fs generic
_supported_os Linux
_require_scratch
_require_attrs
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
# Create our test file with a few xattrs. The first 3 xattrs have a name
# that when given as input to a crc32c function result in the same checksum.
# This made btrfs list only one of the xattrs through listxattrs system call
# (because it packs xattrs with the same name checksum into the same btree
# item).
touch $SCRATCH_MNT/testfile
$SETFATTR_PROG -n user.foobar -v 123 $SCRATCH_MNT/testfile
$SETFATTR_PROG -n user.WvG1c1Td -v qwerty $SCRATCH_MNT/testfile
$SETFATTR_PROG -n user.J3__T_Km3dVsW_ -v hello $SCRATCH_MNT/testfile
$SETFATTR_PROG -n user.something -v pizza $SCRATCH_MNT/testfile
$SETFATTR_PROG -n user.ping -v pong $SCRATCH_MNT/testfile
# Now call getfattr with --dump, which calls the listxattrs system call.
# It should list all the xattrs we have set before.
$GETFATTR_PROG --absolute-names --dump $SCRATCH_MNT/testfile | _filter_scratch
status=0
exit
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_fs_time() instead.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: linux-btrfs@vger.kernel.org
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull btrfs updates from Chris Mason:
"This has our usual assortment of fixes and cleanups, but the biggest
change included is Omar Sandoval's free space tree. It's not the
default yet, mounting -o space_cache=v2 enables it and sets a readonly
compat bit. The tree can actually be deleted and regenerated if there
are any problems, but it has held up really well in testing so far.
For very large filesystems (30T+) our existing free space caching code
can end up taking a huge amount of time during commits. The new tree
based code is faster and less work overall to update as the commit
progresses.
Omar worked on this during the summer and we'll hammer on it in
production here at FB over the next few months"
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (73 commits)
Btrfs: fix fitrim discarding device area reserved for boot loader's use
Btrfs: Check metadata redundancy on balance
btrfs: statfs: report zero available if metadata are exhausted
btrfs: preallocate path for snapshot creation at ioctl time
btrfs: allocate root item at snapshot ioctl time
btrfs: do an allocation earlier during snapshot creation
btrfs: use smaller type for btrfs_path locks
btrfs: use smaller type for btrfs_path lowest_level
btrfs: use smaller type for btrfs_path reada
btrfs: cleanup, use enum values for btrfs_path reada
btrfs: constify static arrays
btrfs: constify remaining structs with function pointers
btrfs tests: replace whole ops structure for free space tests
btrfs: use list_for_each_entry* in backref.c
btrfs: use list_for_each_entry_safe in free-space-cache.c
btrfs: use list_for_each_entry* in check-integrity.c
Btrfs: use linux/sizes.h to represent constants
btrfs: cleanup, remove stray return statements
btrfs: zero out delayed node upon allocation
btrfs: pass proper enum type to start_transaction()
...
Replace the integers by enums for better readability. The value 2 does
not have any meaning since a717531942
"Btrfs: do less aggressive btree readahead" (2009-01-22).
Signed-off-by: David Sterba <dsterba@suse.com>
Use the VFS xattr handler infrastructure and get rid of similar code in
the filesystem.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We don't have to use GFP_NOFS in context of ACL or XATTR actions, not
possible to loop through the allocator and it's safe to fail with
ENOMEM.
Signed-off-by: David Sterba <dsterba@suse.com>
When listing a inode's xattrs we have a time window where we race against
a concurrent operation for adding a new hard link for our inode that makes
us not return any xattr to user space. In order for this to happen, the
first xattr of our inode needs to be at slot 0 of a leaf and the previous
leaf must still have room for an inode ref (or extref) item, and this can
happen because an inode's listxattrs callback does not lock the inode's
i_mutex (nor does the VFS does it for us), but adding a hard link to an
inode makes the VFS lock the inode's i_mutex before calling the inode's
link callback.
If we have the following leafs:
Leaf X (has N items) Leaf Y
[ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ] [ (257 XATTR_ITEM 12345), ... ]
slot N - 2 slot N - 1 slot 0
The race illustrated by the following sequence diagram is possible:
CPU 1 CPU 2
btrfs_listxattr()
searches for key (257 XATTR_ITEM 0)
gets path with path->nodes[0] == leaf X
and path->slots[0] == N
because path->slots[0] is >=
btrfs_header_nritems(leaf X), it calls
btrfs_next_leaf()
btrfs_next_leaf()
releases the path
adds key (257 INODE_REF 666)
to the end of leaf X (slot N),
and leaf X now has N + 1 items
searches for the key (257 INODE_REF 256),
with path->keep_locks == 1, because that
is the last key it saw in leaf X before
releasing the path
ends up at leaf X again and it verifies
that the key (257 INODE_REF 256) is no
longer the last key in leaf X, so it
returns with path->nodes[0] == leaf X
and path->slots[0] == N, pointing to
the new item with key (257 INODE_REF 666)
btrfs_listxattr's loop iteration sees that
the type of the key pointed by the path is
different from the type BTRFS_XATTR_ITEM_KEY
and so it breaks the loop and stops looking
for more xattr items
--> the application doesn't get any xattr
listed for our inode
So fix this by breaking the loop only if the key's type is greater than
BTRFS_XATTR_ITEM_KEY and skip the current key if its type is smaller.
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Due to insufficient check in btrfs_is_valid_xattr, this unexpectedly
works:
$ touch file
$ setfattr -n user. -v 1 file
$ getfattr -d file
user.="1"
ie. the missing attribute name after the namespace.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94291
Reported-by: William Douglas <william.douglas@intel.com>
CC: <stable@vger.kernel.org> # 2.6.29+
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The return value from btrfs_lookup_xattr() can be a pointer encoding an
error, therefore deal with it. This fixes commit 5f5bc6b1e2
("Btrfs: make xattr replace operations atomic").
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Replacing a xattr consists of doing a lookup for its existing value, delete
the current value from the respective leaf, release the search path and then
finally insert the new value. This leaves a time window where readers (getxattr,
listxattrs) won't see any value for the xattr. Xattrs are used to store ACLs,
so this has security implications.
This change also fixes 2 other existing issues which were:
*) Deleting the old xattr value without verifying first if the new xattr will
fit in the existing leaf item (in case multiple xattrs are packed in the
same item due to name hash collision);
*) Returning -EEXIST when the flag XATTR_CREATE is given and the xattr doesn't
exist but we have have an existing item that packs muliple xattrs with
the same name hash as the input xattr. In this case we should return ENOSPC.
A test case for xfstests follows soon.
Thanks to Alexandre Oliva for reporting the non-atomicity of the xattr replace
implementation.
Reported-by: Alexandre Oliva <oliva@gnu.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_set_key_type and btrfs_key_type are used inconsistently along with
open coded variants. Other members of btrfs_key are accessed directly
without any helpers anyway.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs updates from Chris Mason:
"This is a pretty big pull, and most of these changes have been
floating in btrfs-next for a long time. Filipe's properties work is a
cool building block for inheriting attributes like compression down on
a per inode basis.
Jeff Mahoney kicked in code to export filesystem info into sysfs.
Otherwise, lots of performance improvements, cleanups and bug fixes.
Looks like there are still a few other small pending incrementals, but
I wanted to get the bulk of this in first"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (149 commits)
Btrfs: fix spin_unlock in check_ref_cleanup
Btrfs: setup inode location during btrfs_init_inode_locked
Btrfs: don't use ram_bytes for uncompressed inline items
Btrfs: fix btrfs_search_slot_for_read backwards iteration
Btrfs: do not export ulist functions
Btrfs: rework ulist with list+rb_tree
Btrfs: fix memory leaks on walking backrefs failure
Btrfs: fix send file hole detection leading to data corruption
Btrfs: add a reschedule point in btrfs_find_all_roots()
Btrfs: make send's file extent item search more efficient
Btrfs: fix to catch all errors when resolving indirect ref
Btrfs: fix protection between walking backrefs and root deletion
btrfs: fix warning while merging two adjacent extents
Btrfs: fix infinite path build loops in incremental send
btrfs: undo sysfs when open_ctree() fails
Btrfs: fix snprintf usage by send's gen_unique_name
btrfs: fix defrag 32-bit integer overflow
btrfs: sysfs: list the NO_HOLES feature
btrfs: sysfs: don't show reserved incompat feature
btrfs: call permission checks earlier in ioctls and return EPERM
...
