Commit Graph

1886 Commits

Author SHA1 Message Date
Ard Biesheuvel
464fb126d9 efi/libstub/file: Merge file name buffers to reduce stack usage
Arnd reports that commit

  9302c1bb8e ("efi/libstub: Rewrite file I/O routine")

reworks the file I/O routines in a way that triggers the following
warning:

  drivers/firmware/efi/libstub/file.c:240:1: warning: the frame size
            of 1200 bytes is larger than 1024 bytes [-Wframe-larger-than=]

We can work around this issue dropping an instance of efi_char16_t[256]
from the stack frame, and reusing the 'filename' field of the file info
struct that we use to obtain file information from EFI (which contains
the file name even though we already know it since we used it to open
the file in the first place)

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200409130434.6736-8-ardb@kernel.org
2020-04-14 08:32:15 +02:00
Arvind Sankar
21cb9b4143 efi/x86: Always relocate the kernel for EFI handover entry
Commit

  d5cdf4cfea ("efi/x86: Don't relocate the kernel unless necessary")

tries to avoid relocating the kernel in the EFI stub as far as possible.

However, when systemd-boot is used to boot a unified kernel image [1],
the image is constructed by embedding the bzImage as a .linux section in
a PE executable that contains a small stub loader from systemd that will
call the EFI stub handover entry, together with additional sections and
potentially an initrd. When this image is constructed, by for example
dracut, the initrd is placed after the bzImage without ensuring that at
least init_size bytes are available for the bzImage. If the kernel is
not relocated by the EFI stub, this could result in the compressed
kernel's startup code in head_{32,64}.S overwriting the initrd.

To prevent this, unconditionally relocate the kernel if the EFI stub was
entered via the handover entry point.

[1] https://systemd.io/BOOT_LOADER_SPECIFICATION/#type-2-efi-unified-kernel-images

Fixes: d5cdf4cfea ("efi/x86: Don't relocate the kernel unless necessary")
Reported-by: Sergey Shatunov <me@prok.pw>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200406180614.429454-2-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200409130434.6736-5-ardb@kernel.org
2020-04-14 08:32:13 +02:00
Arvind Sankar
105cb9544b efi/x86: Move efi stub globals from .bss to .data
Commit

  3ee372ccce ("x86/boot/compressed/64: Remove .bss/.pgtable from bzImage")

removed the .bss section from the bzImage.

However, while a PE loader is required to zero-initialize the .bss
section before calling the PE entry point, the EFI handover protocol
does not currently document any requirement that .bss be initialized by
the bootloader prior to calling the handover entry.

When systemd-boot is used to boot a unified kernel image [1], the image
is constructed by embedding the bzImage as a .linux section in a PE
executable that contains a small stub loader from systemd together with
additional sections and potentially an initrd. As the .bss section
within the bzImage is no longer explicitly present as part of the file,
it is not initialized before calling the EFI handover entry.
Furthermore, as the size of the embedded .linux section is only the size
of the bzImage file itself, the .bss section's memory may not even have
been allocated.

In particular, this can result in efi_disable_pci_dma being true even
when it was not specified via the command line or configuration option,
which in turn causes crashes while booting on some systems.

To avoid issues, place all EFI stub global variables into the .data
section instead of .bss. As of this writing, only boolean flags for a
few command line arguments and the sys_table pointer were in .bss and
will now move into the .data section.

[1] https://systemd.io/BOOT_LOADER_SPECIFICATION/#type-2-efi-unified-kernel-images

Fixes: 3ee372ccce ("x86/boot/compressed/64: Remove .bss/.pgtable from bzImage")
Reported-by: Sergey Shatunov <me@prok.pw>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200406180614.429454-1-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200409130434.6736-4-ardb@kernel.org
2020-04-14 08:32:13 +02:00
Colin Ian King
05a0879628 efi/libstub/x86: Remove redundant assignment to pointer hdr
The pointer hdr is being assigned a value that is never read and
it is being updated later with a new value. The assignment is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200402102537.503103-1-colin.king@canonical.com
Link: https://lore.kernel.org/r/20200409130434.6736-3-ardb@kernel.org
2020-04-14 08:32:12 +02:00
Takashi Iwai
b450b30b97 efi/cper: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200311072145.5001-1-tiwai@suse.de
Link: https://lore.kernel.org/r/20200409130434.6736-2-ardb@kernel.org
2020-04-14 08:32:11 +02:00
Linus Torvalds
4aafdf6883 sound fixes for 5.7-rc1
A collection of small fixes gathered since the previous update.
 
 * ALSA core:
 - Regression fix for OSS PCM emulation
 
 * ASoC:
 - Trivial fixes in reg bit mask ops, DAPM, DPCM and topology
 - Lots of fixes for Intel-based devices
 - Minor fixes for AMD, STM32, Qualcomm, Realtek
 
 * Others
 - Fixes for the bugs in mixer handling in HD-audio and ice1724
   drivers that were caught by the recent kctl validator
 - New quirks for HD-audio and USB-audio
 
 Also this contains a fix for EDD firmware fix, which slipped
 from anyone's hands.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl6PLNAOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE9Dww//S7LOszzp3CczyVzNzR6XHGArnpWHmQrol+ab
 cwL+Vs30vnlvLTnbyER6q5DeGpBhMfQozp8Ac/LeTd0g3hdh4pIOT2K7oF4MWrk8
 rVlZXI/Q8fKRC5jQR1MedA+naH+1JRKnY7+WqjKlUoDDJaZTygCFADHY4OMtfa7a
 n93d1cAbiUMF+q8CAnxHsNcs6/7rUQiY7HcKrUcNyj8BNaWhWYffMhA8cY6S+8Q7
 9fnjOOc/m5Wy3xTnXHeHlaaqRri8y9t21wXX4vPQZtPPqZ280qqlGcl2nGH4rAVn
 Hl8I6W7Z/fFZao6oZPf8bBDGFiBjb3/6Q8593xB+m85xqfepgbqP0vHDpqOU5hUR
 2rYZIrJOrlYPslIyujhNtCw4OTy6OqbHoZ5iWe0JMXH6u0Ht/XwVx3GCHaupe9gG
 km7FsHfjDw9kkfwImIE7qJTvvTt9l8EZbeCR4zAn204kJkkumlogMYIlcYO2noN4
 dItCeeF7iMhUlgFehsbLw9MEz1bHxMsjKedF97hAlKXwKoz2tM00du84pEs3JaGX
 BCcUke/smVeFUOV8hLOZx1G2e9kR/dHESOOp/1pGJgvNlbboXSyoZNyk9zIlvntx
 uLGon2qYAVXwEmfqQkSAwc/dxuyaYYZVhlXNBQXX6hQC+zw1e9yYddnpY+HX/1r0
 6qDJW4k=
 =mFJY
 -----END PGP SIGNATURE-----

Merge tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes gathered since the previous update.

  ALSA core:
   - Regression fix for OSS PCM emulation

  ASoC:
   - Trivial fixes in reg bit mask ops, DAPM, DPCM and topology
   - Lots of fixes for Intel-based devices
   - Minor fixes for AMD, STM32, Qualcomm, Realtek

  Others:
   - Fixes for the bugs in mixer handling in HD-audio and ice1724
     drivers that were caught by the recent kctl validator
   - New quirks for HD-audio and USB-audio

  Also this contains a fix for EDD firmware fix, which slipped from
  anyone's hands"

* tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
  ALSA: hda: Add driver blacklist
  ALSA: usb-audio: Add mixer workaround for TRX40 and co
  ALSA: hda/realtek - Add quirk for MSI GL63
  ALSA: ice1724: Fix invalid access for enumerated ctl items
  ALSA: hda: Fix potential access overflow in beep helper
  ASoC: cs4270: pull reset GPIO low then high
  ALSA: hda/realtek - Add HP new mute led supported for ALC236
  ALSA: hda/realtek - Add supported new mute Led for HP
  ASoC: rt5645: Add platform-data for Medion E1239T
  ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tablet
  ASoC: stm32: sai: Add missing cleanup
  ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Alpha S
  ASoC: Intel: atom: Fix uninitialized variable compiler warning
  ASoC: Intel: atom: Check drv->lock is locked in sst_fill_and_send_cmd_unlocked
  ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()
  ASoC: SOF: Turn "firmware boot complete" message into a dbg message
  ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk
  ALSA: pcm: oss: Fix regression by buffer overflow fix (again)
  ALSA: pcm: oss: Fix regression by buffer overflow fix
  edd: Use scnprintf() for avoiding potential buffer overflow
  ...
2020-04-10 12:27:06 -07:00
Linus Torvalds
87ebc45d2d arm64 fixes:
- Ensure that the compiler and linker versions are aligned so that ld
   doesn't complain about not understanding a .note.gnu.property section
   (emitted when pointer authentication is enabled).
 
 - Force -mbranch-protection=none when the feature is not enabled, in
   case a compiler may choose a different default value.
 
 - Remove CONFIG_DEBUG_ALIGN_RODATA. It was never in defconfig and rarely
   enabled.
 
 - Fix checking 16-bit Thumb-2 instructions checking mask in the
   emulation of the SETEND instruction (it could match the bottom half of
   a 32-bit Thumb-2 instruction).
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl6PUYAACgkQa9axLQDI
 XvH83g/7B5v0RFqjqVW4/cQKoN1rii7qSA8pBfNgGiCMJKtoGvliAlp3xWEtlW0h
 nYJ4gCvey946r5kvZrjdBXC/Ulo2CcGYtX0n8d+8IB6wXAnGcQ0DUBUFZ4+fAU9Z
 F7+R7its24dma9R1wIFHFmQUdlO+EgQTfQFvhQKYMSNVaFQF73Sp/vk3oKhJ2E0x
 QevgDBQSmmcX3DFxhUW7BdcdboBgtTDUGdhcImdorgp7QmI1r40espJKX4VMKvmb
 pfzwg+i7KM6N1RDhRfA2oFMegXwI3rvM3XesqYaua8+xWD5vJuIQfq+ysEq9F9x/
 Hnu+W9nbcN8RKQ9JToiqkE7ifuOBTvaIJaqsgIXYSqtYjatuPAh85MkrorHi9Ji2
 9i7fc0GMTgtgYDo/93++l8SmmRJMX+h+9KtGtxx39+UqGjToJMCnPGjwBSwe4wdK
 lKOAgj488HHsNwTlrRUnq1hXjNjd1w+ON7JM2L3IyRNX/eWN60VxwzwHkZMByCOj
 jlcY4ISWquigW4w9Sp4nxEhLF9dWT1+OrE33Xh3CUxPU94jSEvgcDHcxuGeGOlrA
 QjN1B2APZFox8XbOsLgeG2kKe5C3Fui90SEn0GyA0ncVLsXDI78VnVJR9uz5+6Pd
 ALVQKkJxswhSDPQFlH+7CmQAcr8jWyLEEvyXXaZsoJmewzCpEPM=
 =pHRG
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

 - Ensure that the compiler and linker versions are aligned so that ld
   doesn't complain about not understanding a .note.gnu.property section
   (emitted when pointer authentication is enabled).

 - Force -mbranch-protection=none when the feature is not enabled, in
   case a compiler may choose a different default value.

 - Remove CONFIG_DEBUG_ALIGN_RODATA. It was never in defconfig and
   rarely enabled.

 - Fix checking 16-bit Thumb-2 instructions checking mask in the
   emulation of the SETEND instruction (it could match the bottom half
   of a 32-bit Thumb-2 instruction).

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: armv8_deprecated: Fix undef_hook mask for thumb setend
  arm64: remove CONFIG_DEBUG_ALIGN_RODATA feature
  arm64: Always force a branch protection mode when the compiler has one
  arm64: Kconfig: ptrauth: Add binutils version check to fix mismatch
  init/kconfig: Add LD_VERSION Kconfig
2020-04-09 11:04:16 -07:00
Linus Torvalds
d18292dc07 ARM: driver updates
These are the usual updates for SoC specific device drivers and related
 subsystems that don't have their own top-level maintainers:
 
 - ARM SCMI/SCPI updates to allow pluggable transport layers
 
 - TEE subsystem cleanups
 
 - A new driver for the Amlogic secure power domain controller
 
 - Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU and
   TI OMAP2+ sysc drivers.
 
 - Qualcomm SoC driver updates, including a new library module for
   "protection domain" notifications
 
 - Lots of smaller bugfixes and cleanups in other drivers
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl6EaKsACgkQmmx57+YA
 GNng5RAAnSi3jLBG3PsX4XCydurlhbYDnakzp2x7kNi0aeN0mR7YT6nbmm8Iax0A
 tYpUNt6mhsSnE7thAX6kIm1CIPw7oKzg5tz9TaNRJT6q1i0+MA0bWAX0KOVzruj5
 xllUIoV0WsYHRjqjxWOJht7zYKTX5PoKr3weRVqHYR60hjkNFT4Myx3HpXn5nQ46
 sEgic+S8WCsbffPqs5HUqkNx9R6D7RIJ72BFSF7o1wy2Brj+g0BxfxAjty+kaWwT
 LtsJm0naGGRag17iij7wBnZ+odWNi80qhtthUncx/c5s517J8Z7Nq2QZJa7XhhjV
 9+/1av7wKyE+V54wnCP4ACZjyE+xE3ghzVxOuzjZfbhkmNCELAx2jmQJbt9gr/t4
 Uek8iANq3bo0epy4iJglfeEJuZ8rZal3oC1gU5rCun/VsqPe5OWhFCzvhu7zVgnD
 Npk/IhCrp7117v5DG2Pvhd9YxigZ4ju3NW2gWukh0TemejRIzyoZyNWux+JD/jCn
 V3ANtT4aCqTJ3ZOL7IaDcX5Kze4KmZZvNKvSSCndcen7u95Z8eW9sIKkSrlp3P5f
 cZAdyULX22im6jXzNz4DJYFRrYgRdXfRLyrS555rGoYZGB1FB1Jhl7SUr385XpBZ
 XD18oPIPm0C3Dn/nhbKC8K44tpKazET8aMCg5lO4bzI5EwqingI=
 =qbsP
 -----END PGP SIGNATURE-----

Merge tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM driver updates from Arnd Bergmann:
 "These are the usual updates for SoC specific device drivers and
  related subsystems that don't have their own top-level maintainers:

   - ARM SCMI/SCPI updates to allow pluggable transport layers

   - TEE subsystem cleanups

   - A new driver for the Amlogic secure power domain controller

   - Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
     and TI OMAP2+ sysc drivers.

   - Qualcomm SoC driver updates, including a new library module for
     "protection domain" notifications

   - Lots of smaller bugfixes and cleanups in other drivers"

* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
  soc: fsl: qe: fix sparse warnings for ucc_slow.c
  soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
  soc: fsl: qe: fix sparse warnings for ucc_fast.c
  soc: fsl: qe: fix sparse warnings for qe_ic.c
  soc: fsl: qe: fix sparse warnings for ucc.c
  soc: fsl: qe: fix sparse warning for qe_common.c
  soc: fsl: qe: fix sparse warnings for qe.c
  soc: qcom: Fix QCOM_APR dependencies
  soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
  soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
  firmware: imx: add COMPILE_TEST for IMX_SCU driver
  soc: imx: gpc: fix power up sequencing
  soc: imx: increase build coverage for imx8m soc driver
  soc: qcom: apr: Add avs/audio tracking functionality
  dt-bindings: soc: qcom: apr: Add protection domain bindings
  soc: qcom: Introduce Protection Domain Restart helpers
  devicetree: bindings: firmware: add ipq806x to qcom_scm
  memory: tegra: Correct debugfs clk rate-range on Tegra124
  memory: tegra: Correct debugfs clk rate-range on Tegra30
  memory: tegra: Correct debugfs clk rate-range on Tegra20
  ...
2020-04-03 15:05:35 -07:00
Linus Torvalds
0e8fb69f28 ARM: SoC updates
The code changes are mostly for 32-bit platforms and include:
 
 - Lots of updates for the Nvidia Tegra platform, including
   cpuidle, pmc, and dt-binding changes
 
 - Microchip at91 power management updates for the recently added
   sam9x60 SoC
 
 - Treewide setup_irq deprecation by afzal mohammed
 
 - STMicroelectronics stm32 gains earlycon support
 
 - Renesas platforms with Cortex-A9 can now use the global timer
 
 - Some TI OMAP2+ platforms gain cpuidle support
 
 - Various cleanups for the i.MX6 and Orion platforms, as well as
   Kconfig files across all platforms
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl6EaLsACgkQmmx57+YA
 GNkg/Q/9EmLGT/bznqi6P/8V75qPY6j4swife5HlI43EdCEyN+iME1w1rFfrNilf
 A/QyXzxhYgUZoyIt7K4qjWc8fPNlJZ8X10UqeEftQFxi82cmX2+OaT2fy6OdHVRJ
 SAGb1pw7463TQ6LKA7LC7rztFjahsjnE/9szlgXQT4v5OzayGyxd3OKy2Q1zASEi
 rwN+85Lh+xJvWhhenPKVvs2Dei+up8Y9uyPfJkj2QudCB+zx5k5stkk4EiQLBd1W
 SHzhijbSU3MrAUz2Cnp9Qa+86DdGPvFPfpzQy3pSYU9nNrC0aKpS8YmHT99SIWVN
 6R1YJF7Htmui5I9+O0baejJMEqvzGUysqe+rQdCofD7ooVKWU7WKYj5HxZxyBCEN
 dvlN3KRmS6l5KLsZARSxuBUw2MPTgjsxczZ84NKMLj8czw6yXyrePZ1RWiEZ4HIu
 4GiFNLYSMmAynD/dLuC9USDsjlPsQKnQ3e8hDf3a6oK5OHUIkr3uvguhqWa5WJsi
 cy2DUeWJkXgJDhlxcfr8MiPpPJRo3N/8O8PYci8dkdDFRs32j/5Qf22vywDdUHaZ
 I9Pl+VOGOSGiqRc9gmay6DNXpJusfuv72omrz4rL4kGMahpk0LeV5w+a9TdrkreY
 sLM67wtshOjOVMc/ebQ5Q8RR17Go+MFK+Co9Yc1ybbQ6lkSzeuY=
 =UTk1
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "The code changes are mostly for 32-bit platforms and include:

   - Lots of updates for the Nvidia Tegra platform, including cpuidle,
     pmc, and dt-binding changes

   - Microchip at91 power management updates for the recently added
     sam9x60 SoC

   - Treewide setup_irq deprecation by afzal mohammed

   - STMicroelectronics stm32 gains earlycon support

   - Renesas platforms with Cortex-A9 can now use the global timer

   - Some TI OMAP2+ platforms gain cpuidle support

   - Various cleanups for the i.MX6 and Orion platforms, as well as
     Kconfig files across all platforms"

* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
  ARM: qcom: Add support for IPQ40xx
  ARM: mmp: replace setup_irq() by request_irq()
  ARM: cns3xxx: replace setup_irq() by request_irq()
  ARM: spear: replace setup_irq() by request_irq()
  ARM: ep93xx: Replace setup_irq() by request_irq()
  ARM: iop32x: replace setup_irq() by request_irq()
  arm: mach-dove: Mark dove_io_desc as __maybe_unused
  ARM: orion: replace setup_irq() by request_irq()
  ARM: debug: stm32: add UART early console support for STM32MP1
  ARM: debug: stm32: add UART early console support for STM32H7
  ARM: debug: stm32: add UART early console configuration for STM32F7
  ARM: debug: stm32: add UART early console configuration for STM32F4
  cpuidle: tegra: Disable CC6 state if LP2 unavailable
  cpuidle: tegra: Squash Tegra114 driver into the common driver
  cpuidle: tegra: Squash Tegra30 driver into the common driver
  cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
  ARM: tegra: cpuidle: Remove unnecessary memory barrier
  ARM: tegra: cpuidle: Make abort_flag atomic
  ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
  ARM: tegra: Make outer_disable() open-coded
  ...
2020-04-03 15:02:35 -07:00
Linus Torvalds
0ad5b053d4 Char/Misc driver patches for 5.7-rc1
Here is the big set of char/misc/other driver patches for 5.7-rc1.
 
 Lots of things in here, and it's later than expected due to some reverts
 to resolve some reported issues.  All is now clean with no reported
 problems in linux-next.
 
 Included in here is:
 	- interconnect updates
 	- mei driver updates
 	- uio updates
 	- nvmem driver updates
 	- soundwire updates
 	- binderfs updates
 	- coresight updates
 	- habanalabs updates
 	- mhi new bus type and core
 	- extcon driver updates
 	- some Kconfig cleanups
 	- other small misc driver cleanups and updates
 
 As mentioned, all have been in linux-next for a while, and with the last
 two reverts, all is calm and good.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodfvA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynzCQCfROhar3E8EhYEqSOP6xq6uhX9uegAnRgGY2rs
 rN4JJpOcTddvZcVlD+vo
 =ocWk
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc/other driver patches for 5.7-rc1.

  Lots of things in here, and it's later than expected due to some
  reverts to resolve some reported issues. All is now clean with no
  reported problems in linux-next.

  Included in here is:
   - interconnect updates
   - mei driver updates
   - uio updates
   - nvmem driver updates
   - soundwire updates
   - binderfs updates
   - coresight updates
   - habanalabs updates
   - mhi new bus type and core
   - extcon driver updates
   - some Kconfig cleanups
   - other small misc driver cleanups and updates

  As mentioned, all have been in linux-next for a while, and with the
  last two reverts, all is calm and good"

* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
  Revert "driver core: platform: Initialize dma_parms for platform devices"
  Revert "amba: Initialize dma_parms for amba devices"
  amba: Initialize dma_parms for amba devices
  driver core: platform: Initialize dma_parms for platform devices
  bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
  bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
  bus: mhi: core: Add support for reading MHI info from device
  misc: rtsx: set correct pcr_ops for rts522A
  speakup: misc: Use dynamic minor numbers for speakup devices
  mei: me: add cedar fork device ids
  coresight: do not use the BIT() macro in the UAPI header
  Documentation: provide IBM contacts for embargoed hardware
  nvmem: core: remove nvmem_sysfs_get_groups()
  nvmem: core: use is_bin_visible for permissions
  nvmem: core: use device_register and device_unregister
  nvmem: core: add root_only member to nvmem device struct
  extcon: axp288: Add wakeup support
  extcon: Mark extcon_get_edev_name() function as exported symbol
  extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
  dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
  ...
2020-04-03 13:22:40 -07:00
Takashi Iwai
dbdd24eaac edd: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().

Link: https://lore.kernel.org/r/20200320084429.1803-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-04-02 20:42:29 +02:00
Linus Torvalds
72f35423e8 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "API:
   - Fix out-of-sync IVs in self-test for IPsec AEAD algorithms

  Algorithms:
   - Use formally verified implementation of x86/curve25519

  Drivers:
   - Enhance hwrng support in caam

   - Use crypto_engine for skcipher/aead/rsa/hash in caam

   - Add Xilinx AES driver

   - Add uacce driver

   - Register zip engine to uacce in hisilicon

   - Add support for OCTEON TX CPT engine in marvell"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
  crypto: af_alg - bool type cosmetics
  crypto: arm[64]/poly1305 - add artifact to .gitignore files
  crypto: caam - limit single JD RNG output to maximum of 16 bytes
  crypto: caam - enable prediction resistance in HRWNG
  bus: fsl-mc: add api to retrieve mc version
  crypto: caam - invalidate entropy register during RNG initialization
  crypto: caam - check if RNG job failed
  crypto: caam - simplify RNG implementation
  crypto: caam - drop global context pointer and init_done
  crypto: caam - use struct hwrng's .init for initialization
  crypto: caam - allocate RNG instantiation descriptor with GFP_DMA
  crypto: ccree - remove duplicated include from cc_aead.c
  crypto: chelsio - remove set but not used variable 'adap'
  crypto: marvell - enable OcteonTX cpt options for build
  crypto: marvell - add the Virtual Function driver for CPT
  crypto: marvell - add support for OCTEON TX CPT engine
  crypto: marvell - create common Kconfig and Makefile for Marvell
  crypto: arm/neon - memzero_explicit aes-cbc key
  crypto: bcm - Use scnprintf() for avoiding potential buffer overflow
  crypto: atmel-i2c - Fix wakeup fail
  ...
2020-04-01 14:47:40 -07:00
Ard Biesheuvel
e16e65a029 arm64: remove CONFIG_DEBUG_ALIGN_RODATA feature
When CONFIG_DEBUG_ALIGN_RODATA is enabled, kernel segments mapped with
different permissions (r-x for .text, r-- for .rodata, rw- for .data,
etc) are rounded up to 2 MiB so they can be mapped more efficiently.
In particular, it permits the segments to be mapped using level 2
block entries when using 4k pages, which is expected to result in less
TLB pressure.

However, the mappings for the bulk of the kernel will use level 2
entries anyway, and the misaligned fringes are organized such that they
can take advantage of the contiguous bit, and use far fewer level 3
entries than would be needed otherwise.

This makes the value of this feature dubious at best, and since it is not
enabled in defconfig or in the distro configs, it does not appear to be
in wide use either. So let's just remove it.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Laura Abbott <labbott@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-04-01 21:44:43 +01:00
Linus Torvalds
dfabb077d6 MMC core:
- Add support for host software queue for (e)MMC/SD
  - Throttle polling rate for CMD6
  - Update CMD13 busy condition check for CMD6 commands
  - Improve busy detect polling for erase/trim/discard/HPI
  - Fixup support for HW busy detection for HPI commands
  - Re-work and improve support for eMMC sanitize commands
 
 MMC host:
  - mmci: Add support for sdmmc variant revision 2.0
  - mmci_sdmmc: Improve support for busyend detection
  - mmci_sdmmc: Fixup support for signal voltage switch
  - mmci_sdmmc: Add support for tuning with delay block
  - mtk-sd: Fix another SDIO irq issue
  - sdhci: Disable native card detect when GPIO based type exist
  - sdhci: Add option to defer request completion
  - sdhci_am654: Add support to set a tap value per speed mode
  - sdhci-esdhc-imx: Add support for i.MX8MM based variant
  - sdhci-esdhc-imx: Fixup support for standard tuning on i.MX8 usdhc
  - sdhci-esdhc-imx: Optimize for strobe/clock dll settings
  - sdhci-esdhc-imx: Fixup support for system and runtime suspend/resume
  - sdhci-iproc: Update regulator/bus-voltage management for bcm2711
  - sdhci-msm: Prevent clock gating with PWRSAVE_DLL on broken variants
  - sdhci-msm: Fix management of CQE during SDHCI reset
  - sdhci-of-arasan: Add support for auto tuning on ZynqMP based platforms
  - sdhci-omap: Add support for system suspend/resume
  - sdhci-sprd: Add support for HW busy detection
  - sdhci-sprd: Enable support host software queue
  - sdhci-tegra: Add support for HW busy detection
  - tmio/renesas_sdhi: Enforce retune after runtime suspend
  - renesas_sdhi: Use manual tap correction for HS400 on some variants
  - renesas_sdhi: Add support for manual correction of tap values for tunings
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAl6CGT8XHHVsZi5oYW5z
 c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjClFWg/+LzX09vHBOfAu7hT/RokcTaBT
 uQnSAfmhkBI+CZerVulPjDX9lFpG2Jb/fu44Ae9EqOAOESAgsTJpxywRRO2f+aNL
 ie9mc0WOkmz1wuAbqYPJImES0CIL2WNpivovLgquRWyltbneh+ImkCbqoWmDYff7
 uIuIC4EPhrWYJczdKr5RCw6HVbsNEAgAr6oJEbmzC63HciCPx5Zo99FN5WHoyRnf
 3c3Ehc4wkVy5iu/wlXqmRdvuayDHhAAmVq6FP5J3IfuoeES3EYeKHc2Ej+pwhYi9
 IFCrO8RDKEu3/o5hLp60ShhF7N/LGWYsl+5KfrwOQ6YPyMLYawR6L0iTYSqkQijy
 3admTGD4OGFuN/8DvQb0yUwhSpRm/Dj+jBZTP3uk9FJHteFlLNHnzREk7weo8i/R
 2WNDSbbV3+TudfC0uC4ipsHtDoidyds+TvR/ebO53pH2Dcr/z6h7i+1tKczA2rK4
 x9mqXhOsskNZC26/UBb9K2oElRON4XDv+VZdQI5ddDuabIYIswXMWLYD1TGYoX5z
 1PXSrrj/Jl/Sz65ZpabKJOexa24s2uThvpOnrGCy2aDc/tbDpcvVhKwL6NX9iRK0
 yYKpwy9yWCGMryVfLI+ahJpvJfQDY4ufKpLC2429LVvgFvNZDG233ZcZhdlhoLNG
 nWh9qHTGTPWo/213yx0=
 =gILc
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support for host software queue for (e)MMC/SD
   - Throttle polling rate for CMD6
   - Update CMD13 busy condition check for CMD6 commands
   - Improve busy detect polling for erase/trim/discard/HPI
   - Fixup support for HW busy detection for HPI commands
   - Re-work and improve support for eMMC sanitize commands

  MMC host:
   - mmci:
       * Add support for sdmmc variant revision 2.0
   - mmci_sdmmc:
       * Improve support for busyend detection
       * Fixup support for signal voltage switch
       * Add support for tuning with delay block
   - mtk-sd:
       * Fix another SDIO irq issue
   - sdhci:
       * Disable native card detect when GPIO based type exist
   - sdhci:
       * Add option to defer request completion
   - sdhci_am654:
       * Add support to set a tap value per speed mode
   - sdhci-esdhc-imx:
       * Add support for i.MX8MM based variant
       * Fixup support for standard tuning on i.MX8 usdhc
       * Optimize for strobe/clock dll settings
       * Fixup support for system and runtime suspend/resume
   - sdhci-iproc:
       * Update regulator/bus-voltage management for bcm2711
   - sdhci-msm:
       * Prevent clock gating with PWRSAVE_DLL on broken variants
       * Fix management of CQE during SDHCI reset
   - sdhci-of-arasan:
       * Add support for auto tuning on ZynqMP based platforms
   - sdhci-omap:
       * Add support for system suspend/resume
   - sdhci-sprd:
       * Add support for HW busy detection
       * Enable support host software queue
   - sdhci-tegra:
       * Add support for HW busy detection
   - tmio/renesas_sdhi:
       * Enforce retune after runtime suspend
   - renesas_sdhi:
       * Use manual tap correction for HS400 on some variants
       * Add support for manual correction of tap values for tunings"

* tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
  mmc: cavium-octeon: remove nonsense variable coercion
  mmc: mediatek: fix SDIO irq issue
  mmc: mmci_sdmmc: Fix clear busyd0end irq flag
  dt-bindings: mmc: Fix node name in an example
  mmc: core: Re-work the code for eMMC sanitize
  mmc: sdhci: use FIELD_GET for preset value bit masks
  mmc: sdhci-of-at91: Display clock changes for debug purpose only
  mmc: sdhci: iproc: Add custom set_power() callback for bcm2711
  mmc: sdhci: am654: Use sdhci_set_power_and_voltage()
  mmc: sdhci: at91: Use sdhci_set_power_and_voltage()
  mmc: sdhci: milbeaut: Use sdhci_set_power_and_voltage()
  mmc: sdhci: arasan: Use sdhci_set_power_and_voltage()
  mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage()
  mmc: vub300: Use scnprintf() for avoiding potential buffer overflow
  dt-bindings: mmc: synopsys-dw-mshc: fix clock-freq-min-max in example
  sdhci: tegra: Enable MMC_CAP_WAIT_WHILE_BUSY host capability
  sdhci: tegra: Implement Tegra specific set_timeout callback
  mmc: sdhci-omap: Add Support for Suspend/Resume
  mmc: renesas_sdhi: simplify execute_tuning
  mmc: renesas_sdhi: Use BITS_PER_LONG helper
  ...
2020-03-31 16:13:09 -07:00
Linus Torvalds
9589351ccf Merge branch 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
 "Misc cleanups and small enhancements all around the map"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot/compressed: Fix debug_puthex() parameter type
  x86/setup: Fix static memory detection
  x86/vmlinux: Drop unneeded linker script discard of .eh_frame
  x86/*/Makefile: Use -fno-asynchronous-unwind-tables to suppress .eh_frame sections
  x86/boot/compressed: Remove .eh_frame section from bzImage
  x86/boot/compressed/64: Remove .bss/.pgtable from bzImage
  x86/boot/compressed/64: Use 32-bit (zero-extended) MOV for z_output_len
  x86/boot/compressed/64: Use LEA to initialize boot stack pointer
2020-03-31 10:28:35 -07:00
Linus Torvalds
3cd86a58f7 arm64 updates for 5.7:
- In-kernel Pointer Authentication support (previously only offered to
   user space).
 
 - ARM Activity Monitors (AMU) extension support allowing better CPU
   utilisation numbers for the scheduler (frequency invariance).
 
 - Memory hot-remove support for arm64.
 
 - Lots of asm annotations (SYM_*) in preparation for the in-kernel
   Branch Target Identification (BTI) support.
 
 - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU
   init callbacks, support for new DT compatibles.
 
 - IPv6 header checksum optimisation.
 
 - Fixes: SDEI (software delegated exception interface) double-lock on
   hibernate with shared events.
 
 - Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm()
   converted to C, cpufeature finalisation helper.
 
 - sys_mremap() comment explaining the asymmetric address untagging
   behaviour.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl6DVyIACgkQa9axLQDI
 XvHkqRAAiZA2EYKiQL4M1DJ1cNTADjT7xKX9+UtYBXj7GMVhgVWdunpHVE6qtfgk
 cT6avmKrS/6PDqizJgr+Z1yX8x3Kvs57G4BvmIUKIw97mkdewvFQ9JKv6VA1vb86
 7Qrl1WzqsGg5Kj9uUfI4h+ZoT1H4C/9PQeFxJwgZRtF9DxRh8O7VeZI+JCu8Aub2
 lIkjI8rh+EpTsGT9h/PMGWUcawnKQloZ1/F+GfMAuYBvIv2RNN2xVreJtTmm4NyJ
 VcpL0KCNyAI2lGdaJg5nBLRDyGuXDm5i+PLsCSXMquI4fie00txXeD8sjbeuO0ks
 YTJ0EhmUUhbSE17go+SxYiEFE0v09i+lD5ud+B4Vmojp0KTczTta9VSgURlbb2/9
 n9biq5G3PPDNIrZqiTT2Tf4AMz1350nkbzL2gzKecM5aIzR/u3y5yII5CgfZtFnj
 7bGbyFpFpcqI7UaISPsNCxmknbTt/7ff0WM3+7SbecxI3AD2mnxsOdN9JTLyhDp+
 owjyiaWxl5zMWF9DhplLG/9BKpNWSxh3skazdOdELd8GTq2MbJlXrVG2XgXTAOh3
 y1s6RQrfw8zXh8TSqdmmzauComXIRWTum/sbVB3U8Z3AUsIeq/NTSbN5X9JyIbOP
 HOabhlVhhkI6omN1grqPX4jwUiZLZoNfn7Ez4q71549KVK/uBtA=
 =LJVX
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:
 "The bulk is in-kernel pointer authentication, activity monitors and
  lots of asm symbol annotations. I also queued the sys_mremap() patch
  commenting the asymmetry in the address untagging.

  Summary:

   - In-kernel Pointer Authentication support (previously only offered
     to user space).

   - ARM Activity Monitors (AMU) extension support allowing better CPU
     utilisation numbers for the scheduler (frequency invariance).

   - Memory hot-remove support for arm64.

   - Lots of asm annotations (SYM_*) in preparation for the in-kernel
     Branch Target Identification (BTI) support.

   - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
     PMU init callbacks, support for new DT compatibles.

   - IPv6 header checksum optimisation.

   - Fixes: SDEI (software delegated exception interface) double-lock on
     hibernate with shared events.

   - Minor clean-ups and refactoring: cpu_ops accessor,
     cpu_do_switch_mm() converted to C, cpufeature finalisation helper.

   - sys_mremap() comment explaining the asymmetric address untagging
     behaviour"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
  mm/mremap: Add comment explaining the untagging behaviour of mremap()
  arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
  arm64: Introduce get_cpu_ops() helper function
  arm64: Rename cpu_read_ops() to init_cpu_ops()
  arm64: Declare ACPI parking protocol CPU operation if needed
  arm64: move kimage_vaddr to .rodata
  arm64: use mov_q instead of literal ldr
  arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
  lkdtm: arm64: test kernel pointer authentication
  arm64: compile the kernel with ptrauth return address signing
  kconfig: Add support for 'as-option'
  arm64: suspend: restore the kernel ptrauth keys
  arm64: __show_regs: strip PAC from lr in printk
  arm64: unwind: strip PAC from kernel addresses
  arm64: mask PAC bits of __builtin_return_address
  arm64: initialize ptrauth keys for kernel booting task
  arm64: initialize and switch ptrauth kernel keys
  arm64: enable ptrauth earlier
  arm64: cpufeature: handle conflicts based on capability
  arm64: cpufeature: Move cpu capability helpers inside C file
  ...
2020-03-31 10:05:01 -07:00
Linus Torvalds
d71e064449 MIPS updates for v5.7:
- loongson64 irq rework
 - dmi support loongson
 - replace setup_irq() by request_irq()
 - jazz cleanups
 - minor cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAl6B2ewaHHRzYm9nZW5k
 QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHBNNRAAhaZWpw1eP/cUAqCMH2VU
 vrEFi6hmXJwSE5RFeq5ykLig45ObkkYJnTXbSH8SuOhwH3NBnjYSJuMxpGrsXt7p
 U3NPWCqCqo2Ff+qFJlLvmATYMtpKK58xL5nsY4eXgQwMrki28SMB8L7TYq6nme5q
 zbZeZxOo4k3MTw4fpy1BTMnnssYSyXwaSP5YFBEfRLgJ38ciu2fSmHIKj89z/fnK
 k/xPuBz8Mh8CwKOuaCsFFO27R8Dmj6s9N2YKimP8dt8h/rzDXXH9O9ZxYW5tWvxk
 f04nM3UvfAGdGQKhwR695DmGtXOBcKM/UaW+X2m0LRpV1qFvZ6D9P09zrYzJXHZV
 5NfAzczra+qafuZDCHmq/B2Bv3ddoiiF91zHZ2e59IXAJAXr7bu5CsCy53avWkeG
 EFEXpicTXBWD6OpYOaG8K4SrJS6EZ6JRJJ3lHiqrAeqF/EmD6tmYXavMXHpScdl8
 u0uCCm6Dh4/UxmwwYRTu3pgh6PmB7LAUemKZgMsSGeN4/BiwCrG6Vm/DouxJDMum
 HWSI0LpBzChHiBlT2ldN+AxeH09ovJ9EmYN8pti4ciGMNaLWKCbwcrlj0sZNmcof
 NEhRrdsrHcawVK0xabiDFihDAnWtKiFTz4IaK3i/I8lF+L18fm30SGafT+G2vNhp
 GItmmbmxPmA7qOJVDpwLEUs=
 =OuFQ
 -----END PGP SIGNATURE-----

Merge tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - loongson64 irq rework

 - dmi support loongson

 - replace setup_irq() by request_irq()

 - jazz cleanups

 - minor cleanups and fixes

* tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (44 commits)
  MIPS: ralink: mt7621: Fix soc_device introduction
  MIPS: Exclude more dsemul code when CONFIG_MIPS_FP_SUPPORT=n
  MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3
  MIPS: do not compile generic functions for CONFIG_CAVIUM_OCTEON_SOC
  MAINTAINERS: Update Loongson64 entry
  MIPS: Loongson64: Load built-in dtbs
  MIPS: Loongson64: Add generic dts
  dt-bindings: mips: Add loongson boards
  MIPS: Loongson64: Drop legacy IRQ code
  dt-bindings: interrupt-controller: Add Loongson-3 HTPIC
  irqchip: Add driver for Loongson-3 HyperTransport PIC controller
  dt-bindings: interrupt-controller: Add Loongson LIOINTC
  irqchip: loongson-liointc: Workaround LPC IRQ Errata
  irqchip: Add driver for Loongson I/O Local Interrupt Controller
  docs: mips: remove no longer needed au1xxx_ide.rst documentation
  MIPS: Alchemy: remove no longer used au1xxx_ide.h header
  ide: remove no longer used au1xxx-ide driver
  MIPS: Add support for Desktop Management Interface (DMI)
  firmware: dmi: Add macro SMBIOS_ENTRY_POINT_SCAN_START
  MIPS: ralink: mt7621: introduce 'soc_device' initialization
  ...
2020-03-31 08:51:45 -07:00
Linus Torvalds
992a1a3b45 CPU (hotplug) updates:
- Support for locked CSD objects in smp_call_function_single_async()
     which allows to simplify callsites in the scheduler core and MIPS
 
   - Treewide consolidation of CPU hotplug functions which ensures the
     consistency between the sysfs interface and kernel state. The low level
     functions cpu_up/down() are now confined to the core code and not
     longer accessible from random code.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl6B9VQTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYodCyD/0WFYAe7LkOfNjkbLa0IeuyLjF9rnCi
 ilcSXMLpaVwwoQvm7MopwkXUDdmEIyeJ0B641j3mC3AKCRap4+O36H2IEg2byrj7
 twOvQNCfxpVVmCCD11FTH9aQa74LEB6AikTgjevhrRWj6eHsal7c2Ak26AzCgrt+
 0eEkOAOWJbLAlbIiPdHlCZ3TMldcs3gg+lRSYd5QCGQVkZFnwpXzyOvpyJEUGGbb
 R/JuvwJoLhRMiYAJDILoQQQg/J07ODuivse/R8PWaH2djkn+2NyRGrD794PhyyOg
 QoTU0ZrYD3Z48ACXv+N3jLM7wXMcFzjYtr1vW1E3O/YGA7GVIC6XHGbMQ7tEihY0
 ajtwq8DcnpKtuouviYnf7NuKgqdmJXkaZjz3Gms6n8nLXqqSVwuQELWV2CXkxNe6
 9kgnnKK+xXMOGI4TUhN8bejvkXqRCmKMeQJcWyf+7RA9UIhAJw5o7WGo8gXfQWUx
 tazCqDy/inYjqGxckW615fhi2zHfemlYTbSzIGOuMB1TEPKFcrgYAii/VMsYHQVZ
 5amkYUXGQ5brlCOzOn38lzp5OkALBnFzD7xgvOcQgWT3ynVpdqADfBytXiEEHh4J
 KSkSgSSRcS58397nIxnDcJgJouHLvAWYyPZ4UC6mfynuQIic31qMHGVqwdbEKMY3
 4M5dGgqIfOBgYw==
 =jwCg
 -----END PGP SIGNATURE-----

Merge tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull core SMP updates from Thomas Gleixner:
 "CPU (hotplug) updates:

   - Support for locked CSD objects in smp_call_function_single_async()
     which allows to simplify callsites in the scheduler core and MIPS

   - Treewide consolidation of CPU hotplug functions which ensures the
     consistency between the sysfs interface and kernel state. The low
     level functions cpu_up/down() are now confined to the core code and
     not longer accessible from random code"

* tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  cpu/hotplug: Ignore pm_wakeup_pending() for disable_nonboot_cpus()
  cpu/hotplug: Hide cpu_up/down()
  cpu/hotplug: Move bringup of secondary CPUs out of smp_init()
  torture: Replace cpu_up/down() with add/remove_cpu()
  firmware: psci: Replace cpu_up/down() with add/remove_cpu()
  xen/cpuhotplug: Replace cpu_up/down() with device_online/offline()
  parisc: Replace cpu_up/down() with add/remove_cpu()
  sparc: Replace cpu_up/down() with add/remove_cpu()
  powerpc: Replace cpu_up/down() with add/remove_cpu()
  x86/smp: Replace cpu_up/down() with add/remove_cpu()
  arm64: hibernate: Use bringup_hibernate_cpu()
  cpu/hotplug: Provide bringup_hibernate_cpu()
  arm64: Use reboot_cpu instead of hardconding it to 0
  arm64: Don't use disable_nonboot_cpus()
  ARM: Use reboot_cpu instead of hardcoding it to 0
  ARM: Don't use disable_nonboot_cpus()
  ia64: Replace cpu_down() with smp_shutdown_nonboot_cpus()
  cpu/hotplug: Create a new function to shutdown nonboot cpus
  cpu/hotplug: Add new {add,remove}_cpu() functions
  sched/core: Remove rq.hrtick_csd_pending
  ...
2020-03-30 18:06:39 -07:00
Linus Torvalds
a776c270a0 Merge branch 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
 "The EFI changes in this cycle are much larger than usual, for two
  (positive) reasons:

   - The GRUB project is showing signs of life again, resulting in the
     introduction of the generic Linux/UEFI boot protocol, instead of
     x86 specific hacks which are increasingly difficult to maintain.
     There's hope that all future extensions will now go through that
     boot protocol.

   - Preparatory work for RISC-V EFI support.

  The main changes are:

   - Boot time GDT handling changes

   - Simplify handling of EFI properties table on arm64

   - Generic EFI stub cleanups, to improve command line handling, file
     I/O, memory allocation, etc.

   - Introduce a generic initrd loading method based on calling back
     into the firmware, instead of relying on the x86 EFI handover
     protocol or device tree.

   - Introduce a mixed mode boot method that does not rely on the x86
     EFI handover protocol either, and could potentially be adopted by
     other architectures (if another one ever surfaces where one
     execution mode is a superset of another)

   - Clean up the contents of 'struct efi', and move out everything that
     doesn't need to be stored there.

   - Incorporate support for UEFI spec v2.8A changes that permit
     firmware implementations to return EFI_UNSUPPORTED from UEFI
     runtime services at OS runtime, and expose a mask of which ones are
     supported or unsupported via a configuration table.

   - Partial fix for the lack of by-VA cache maintenance in the
     decompressor on 32-bit ARM.

   - Changes to load device firmware from EFI boot service memory
     regions

   - Various documentation updates and minor code cleanups and fixes"

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
  efi/libstub/arm: Fix spurious message that an initrd was loaded
  efi/libstub/arm64: Avoid image_base value from efi_loaded_image
  partitions/efi: Fix partition name parsing in GUID partition entry
  efi/x86: Fix cast of image argument
  efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations
  efi: Fix a mistype in comments mentioning efivar_entry_iter_begin()
  efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux
  efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map()
  efi/x86: Ignore the memory attributes table on i386
  efi/x86: Don't relocate the kernel unless necessary
  efi/x86: Remove extra headroom for setup block
  efi/x86: Add kernel preferred address to PE header
  efi/x86: Decompress at start of PE image load address
  x86/boot/compressed/32: Save the output address instead of recalculating it
  efi/libstub/x86: Deal with exit() boot service returning
  x86/boot: Use unsigned comparison for addresses
  efi/x86: Avoid using code32_start
  efi/x86: Make efi32_pe_entry() more readable
  efi/x86: Respect 32-bit ABI in efi32_pe_entry()
  efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA
  ...
2020-03-30 16:13:08 -07:00
Linus Torvalds
59838093be Driver core patches for 5.7-rc1
Here is the "big" set of driver core changes for 5.7-rc1.
 
 Nothing huge in here, just lots of little firmware core changes and use
 of new apis, a libfs fix, a debugfs api change, and some driver core
 deferred probe rework.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXoHLIg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yle2ACgjJJzRJl9Ckae3ms+9CS4OSFFZPsAoKSrXmFc
 Z7goYQdZo1zz8c0RYDrJ
 =Y91m
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core changes for 5.7-rc1.

  Nothing huge in here, just lots of little firmware core changes and
  use of new apis, a libfs fix, a debugfs api change, and some driver
  core deferred probe rework.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (44 commits)
  Revert "driver core: Set fw_devlink to "permissive" behavior by default"
  driver core: Set fw_devlink to "permissive" behavior by default
  driver core: Replace open-coded list_last_entry()
  driver core: Read atomic counter once in driver_probe_done()
  libfs: fix infoleak in simple_attr_read()
  driver core: Add device links from fwnode only for the primary device
  platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet
  platform/x86: touchscreen_dmi: Add EFI embedded firmware info support
  Input: icn8505 - Switch to firmware_request_platform for retreiving the fw
  Input: silead - Switch to firmware_request_platform for retreiving the fw
  selftests: firmware: Add firmware_request_platform tests
  test_firmware: add support for firmware_request_platform
  firmware: Add new platform fallback mechanism and firmware_request_platform()
  Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking"
  drivers: base: power: wakeup.c: Use built-in RCU list checking
  component: allow missing unbind callback
  debugfs: remove return value of debugfs_create_file_size()
  debugfs: Check module state before warning in {full/open}_proxy_open()
  firmware: fix a double abort case with fw_load_sysfs_fallback
  arch_topology: Fix putting invalid cpu clk
  ...
2020-03-30 13:59:52 -07:00
Thomas Bogendoerfer
ba15533275 Linux 5.6
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl6BIG4eHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGlHUH/RCFve2sfHRPjRW+
 xR5SaLVAw6XKvtKBq7yvKmHEwqNJnL79IHyqqtSrtfFr2FfaH/KvYiCbbAezvSrM
 np0udGu7STKGd21CWuyEZJudyhXkOwMRNiFiCXWp7rs35oh8T0TpJxMzo2Nc1nLk
 JFQPqAP6OSvq4IkWEywKQI+Au3Z1IBf83xVjZ1s+MKPQHYD49x2hc4cQntL5/cnm
 a3DoR2iBkYiGZCZ9dDqAqJTnMQIiCbACdZXgGjNRUpdyA/dtAjsMl11NPYHm8TA2
 3AHBupAK50WBZGad6xv2qKQyScsmoJG2mv92QjlOFz0Tpiu6rLnDlLYREDVB6YH6
 qbLDsc8=
 =XEIU
 -----END PGP SIGNATURE-----

Merge tag 'v5.6' into mips-next

Linux 5.6
2020-03-30 13:31:37 +02:00
Ard Biesheuvel
594e576d4b efi/libstub/arm: Fix spurious message that an initrd was loaded
Commit:

  ec93fc371f ("efi/libstub: Add support for loading the initrd from a device path")

added a diagnostic print to the ARM version of the EFI stub that
reports whether an initrd has been loaded that was passed
via the command line using initrd=.

However, it failed to take into account that, for historical reasons,
the file loading routines return EFI_SUCCESS when no file was found,
and the only way to decide whether a file was loaded is to inspect
the 'size' argument that is passed by reference. So let's inspect
this returned size, to prevent the print from being emitted even if
no initrd was loaded at all.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-efi@vger.kernel.org
2020-03-29 12:08:18 +02:00
Ard Biesheuvel
c2136dceba efi/libstub/arm64: Avoid image_base value from efi_loaded_image
Commit:

  9f9223778e ("efi/libstub/arm: Make efi_entry() an ordinary PE/COFF entrypoint")

did some code refactoring to get rid of the EFI entry point assembler
code, and in the process, it got rid of the assignment of image_addr
to the value of _text. Instead, it switched to using the image_base
field of the efi_loaded_image struct provided by UEFI, which should
contain the same value.

However, Michael reports that this is not the case: older GRUB builds
corrupt this value in some way, and since we can easily switch back to
referring to _text to discover this value, let's simply do that.

While at it, fix another issue in commit 9f9223778e, which may result
in the unassigned image_addr to be misidentified as the preferred load
offset of the kernel, which is unlikely but will cause a boot crash if
it does occur.

Finally, let's add a warning if the _text vs. image_base discrepancy is
detected, so we can tell more easily how widespread this issue actually
is.

Reported-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-efi@vger.kernel.org
2020-03-29 12:08:18 +02:00
Arnd Bergmann
cedb414aa8 Merge tag 'scmi-updates-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
ARM SCMI/SCPI updates for v5.7

1. Abstraction of the scmi transport type from the core protocol driver
   which enables addition of other transports like SMC/HVC, SPCI and
   virtio apart from the existing mailbox
2. Miscellaneous fix for minor formatting issues with the kernel-doc
   style comments
3. Replacement of zero-length array with flexible-array member which is
   part of tree-wide cleanup

* tag 'scmi-updates-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  misc: vexpress: Replace zero-length array with flexible-array member
  firmware: arm_scpi: Replace zero-length array with flexible-array member
  firmware: arm_scmi/perf: Replace zero-length array with flexible-array member
  firmware: arm_scmi: Replace zero-length array with flexible-array member
  firmware: arm_scmi: Make scmi core independent of the transport type
  firmware: arm_scmi: Move macros and helpers to common.h
  firmware: arm_scmi: Update doc style comments

Link: https://lore.kernel.org/r/20200304175247.GA5402@bogus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-27 14:26:14 +01:00
Arnd Bergmann
c23960dd18 firmware: tegra: Changes for v5.7-rc1
A trivial typofix for the Kconfig entry of the Tegra IVC library.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl5rtjsTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zod3ZD/9fo/3c5Y5LtHu440rm8q2EkGxhELQx
 RkKtmBoz/sc2dFH7nQ8heB5/23E5bcnEoDgZlF/C2fBHThKcBgzD/aTQYRjWV1Pw
 T0Cg1w5jCkkbi8mKoT5U/vceN7mAFKWV/DsJsUHB9OEoWpAQtMUxT4Tn7y9LriYY
 J++hoJpRZBNBW9fxkFb7wMp65xfvYVcCae0nY8V3fE2gIX1SXtdoiZc+p0dVS/Md
 7nskUXWy7jVI+SI0sn/YkghjTF6V5s2DOm7/xVFqfllM7k5a8ovDLSYkJ/7MDP4n
 /q+P+f+kwbm4oEbhdVe+kslEvNsDEQd3zqgDfkv2lhFgxucYaKM/cVre7urXMJ5s
 TYBDf+aVbMF2vH6ptcbtw84oT8ff1fnNL33dojWSK46dHhBPBcHmvMX74hffFXm8
 FEpLan3H8X0FyCuA6Baweub9VLnlJ8+NfPhTHirKo/hClHtDhMIt4ifBoGUayknl
 5++JBuBwM8MGAXKHBO8nN99c1vYG2eRGuBY87zNv8r/oE5IKRdn8pGJuUntxLz4F
 b8Bsdum9w59+4FsfXTLmN7JCgtdRRck1TjsfVEj3M3msTbQ4CVFcOTSDKMCxHLpt
 pN4eDBX7miuDzp2lLY0nvcphDJ6E1hvXeDiaPgb9LR1bPZnukaZAKrjpNUa2TAj0
 OxGOWJEpwXRMjA==
 =irBu
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.7-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

firmware: tegra: Changes for v5.7-rc1

A trivial typofix for the Kconfig entry of the Tegra IVC library.

* tag 'tegra-for-5.7-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  firmware: tegra: Fix a typo in Kconfig

Link: https://lore.kernel.org/r/20200313165848.2915133-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-26 10:54:00 +01:00
Arnd Bergmann
90ae9ee792 i.MX drivers update for 5.7:
- Update SCU power domain driver to include PD ranges for audio, CM40
    I2C and INTMUX, also  enlarge PD range for mu_b.
  - Remove IMX_SC_RPC_SVC_ABORT from SCU API, as it was added by mistake.
  - Increase build test coverage for i.MX8M SoC and IMX_SCU driver.
  - Improve i.MX GPC power up sequencing to ensure that the reset is
    properly propagated through the peripheral devices in the power
    domain.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl5xhKcUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM4/6gf/e9lFuDNG9HiVsDad6YODwzZZxNF6
 AxBqD924W4chqLZboAgahFVrWEyINourkzx9PMYK5gE6D6lxEnHhevbfVOYaw3NT
 Wjv4TSOCMzzlfzJIeFf+m0vzTR3gOtmE6Cto/HMd95IlF+afCzIWrKW+gAGWoRVH
 c1sCstForQ8SMoFixCJ+YfV8DXje1wGqgLEquMtn5jih2ZEIijo2XZ4nPs6ip4mV
 Pf+a3WXuN2NB13U2CKbkonk+JY2d8OFqLNQer7WsNp29wCSJqZB2ewnZP/vGSqvO
 e/i4BxMTtKg/2DPZFmCZNVbM3aEf0tv2E2c28bcb5qDuJfFu2jE4+olwCg==
 =LVyO
 -----END PGP SIGNATURE-----

Merge tag 'imx-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers

i.MX drivers update for 5.7:

 - Update SCU power domain driver to include PD ranges for audio, CM40
   I2C and INTMUX, also  enlarge PD range for mu_b.
 - Remove IMX_SC_RPC_SVC_ABORT from SCU API, as it was added by mistake.
 - Increase build test coverage for i.MX8M SoC and IMX_SCU driver.
 - Improve i.MX GPC power up sequencing to ensure that the reset is
   properly propagated through the peripheral devices in the power
   domain.

* tag 'imx-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
  firmware: imx: add COMPILE_TEST for IMX_SCU driver
  soc: imx: gpc: fix power up sequencing
  soc: imx: increase build coverage for imx8m soc driver
  firmware: imx: scu-pd: add power domain for I2C and INTMUX in CM40 SS
  firmware: imx: Remove IMX_SC_RPC_SVC_ABORT
  firmware: imx: scu-pd: enlarge PD range for mu_b
  firmware: imx: scu-pd: Add missing audio PD ranges
  soc: imx: gpcv2: include linux/sizes.h

Link: https://lore.kernel.org/r/20200318051918.32579-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25 13:36:09 +01:00
Qais Yousef
20fb50295b firmware: psci: Replace cpu_up/down() with add/remove_cpu()
The core device API performs extra housekeeping bits that are missing
from directly calling cpu_up/down().

See commit a6717c01dd ("powerpc/rtas: use device model APIs and
serialization during LPM") for an example description of what might go
wrong.

This also prepares to make cpu_up/down a private interface of the CPU subsystem.

Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lkml.kernel.org/r/20200323135110.30522-15-qais.yousef@arm.com
2020-03-25 12:59:37 +01:00
Manish Narani
0dc64c2b94 firmware: xilinx: Add DLL reset support
SD DLL resets are required for some of the operations on ZynqMP platform.
Add DLL reset support in ZynqMP firmware driver for SD DLL reset.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1579602095-30060-3-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24 14:35:38 +01:00
Manish Narani
93660d837f firmware: xilinx: Add ZynqMP Tap Delay setup ioctl to the valid list
The Tap Delay setup ioctl was not added to valid list due to which it
may fail to set Tap Delays for SD. This patch fixes the same.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1579602095-30060-2-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-03-24 14:35:38 +01:00
Tiezhu Yang
3da27a4eb8 firmware: dmi: Add macro SMBIOS_ENTRY_POINT_SCAN_START
Use SMBIOS_ENTRY_POINT_SCAN_START instead of 0xF0000, because other
archtecture maybe use a special start address such as 0xFFFE000 for
Loongson platform.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-23 15:44:04 +01:00
Greg Kroah-Hartman
baca54d956 Merge 5.6-rc7 into char-misc-next
We need the char/misc driver fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-23 07:59:38 +01:00
Hans de Goede
835e1b86ef platform/x86: touchscreen_dmi: Add EFI embedded firmware info support
Sofar we have been unable to get permission from the vendors to put the
firmware for touchscreens listed in touchscreen_dmi in linux-firmware.

Some of the tablets with such a touchscreen have a touchscreen driver, and
thus a copy of the firmware, as part of their EFI code.

This commit adds the necessary info for the new EFI embedded-firmware code
to extract these firmwares, making the touchscreen work OOTB without the
user needing to manually add the firmware.

Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115163554.101315-10-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-20 14:57:54 +01:00
Greg Kroah-Hartman
4445eb6d94 Stable shared branch between EFI and driver tree
Stable shared branch to ease the integration of Hans's series to support
 device firmware loaded from EFI boot service memory regions.
 
 [PATCH v12 00/10] efi/firmware/platform-x86: Add EFI embedded fw support
 https://lore.kernel.org/linux-efi/20200115163554.101315-1-hdegoede@redhat.com/
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl5eJNoACgkQwjcgfpV0
 +n16Fwf/fXCS+xefhIeXZuUQsQexDsofHYrWlt9oS74KF6iqxVDdfSRZHZvAT/Hr
 r1pYpMFSKhRy/u8hhTz1RxwoJXiwQg+yPKwLAMvt+xx2BaNJzLFPvWX8euHYDubM
 mWfrjStgandAcNzBDBIYYdG/fSYjlzq/xWF+rlYnnhMNa6lcYhecwgxmt0iYtMnB
 S31473zE7DZE0PyV9vEEMyaEbQJYprKrIGoaVpbQ80Y2f2MDNaft+7/EGXx5Hxex
 pHZrBdkCL1v7ej7pg8bcxqid682fle5tnogzxf5jo0xMMSXnT5xVPg4OL3rY7kwD
 Ba4cLaJD4Q1fFZ1GwPfa59PrDnUIfA==
 =sj1e
 -----END PGP SIGNATURE-----

Merge tag 'stable-shared-branch-for-driver-tree' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into driver-core-next

Ard writes:

Stable shared branch between EFI and driver tree

Stable shared branch to ease the integration of Hans's series to support
device firmware loaded from EFI boot service memory regions.

[PATCH v12 00/10] efi/firmware/platform-x86: Add EFI embedded fw support
https://lore.kernel.org/linux-efi/20200115163554.101315-1-hdegoede@redhat.com/

* tag 'stable-shared-branch-for-driver-tree' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: Add embedded peripheral firmware support
  efi: Export boot-services code and data as debugfs-blobs
2020-03-20 14:50:48 +01:00
Anson Huang
a9f85f93ed firmware: imx: add COMPILE_TEST support
Add COMPILE_TEST support to i.MX SCU drivers for better compile
testing coverage.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Link: https://lore.kernel.org/r/1583509356-8265-1-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18 12:34:09 +01:00
Richard Gong
f276d3ea88 firmware: stratix10-svc: add the compatible value for intel agilex
Add the compatible property value so we can reuse Intel Stratix10
Service Layer driver on Intel Agilex SoC platform.

Signed-off-by: Richard Gong <richard.gong@intel.com>
Acked-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/1583428346-13307-2-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18 12:24:18 +01:00
Richard Gong
231d901d1e firmware: intel_stratix10_service: add depend on agilex
Add depend on Agilex for Intel Agilex SoC platform.

Signed-off-by: Richard Gong <richard.gong@intel.com>
Acked-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/1583428346-13307-3-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18 12:24:18 +01:00
Anson Huang
5b00b83754 firmware: imx: add COMPILE_TEST for IMX_SCU driver
Add COMPILE_TEST support to IMX_SCU driver for better compile
testing coverage.  Any driver depending on IMX_SCU shouldn't have
COMPILE_TEST though.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16 11:41:58 +08:00
Linus Torvalds
b67775e124 Two EFI fixes:
- Prevent a race and buffer overflow in the sysfs efivars interface which
    causes kernel memory corruption.
 
  - Add the missing NULL pointer checks in efivar_store_raw()
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl5uPtwTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoU7CEAC7TN816o0o2EUokeThTnzEN1YljTNd
 zxL9Kin+a8PnVGM2KsJJNGN3vVErdzIqPrpiNRvVvV5PVBmXVkJiMQAFqBeP5Lu1
 h+69W5pGPVPun3EUnIKvTgrBkHU5F2GsDrUjaERZdP/ukeIpYf1oAmY7yMMRNSiI
 0ApjU5uhcuuLJHKUQ9xEz/QLNunbDW7j8tJy0jEsFKYixTsH2Gp4hiWWKONbPqhe
 K3Gs81NErIMz6iVsQmGEMKOqWo2TLtR3tIykGtj89fohauDwNvlmCOyV1l+ILdZd
 +SQhnM/yEimLfjV/QVyu/OxFFk9mK7iLQx7ADAtssMyz0z3vs9OyJqwicwjectl/
 70Ye9u+M4YzkgXYiUNJlXeRorhpZd6mpcj4lo5FrE42ydgd6Gmc2wNLT5P8bwO6T
 bMWPCdl/+9v3NofCFr1JCTHHtW6qgdEF1ehkW/P8NkxEQKvtMp5IV3M2DnR1TAxh
 oflf+nnA//daxc6RKzn5k0bMbQreXnBpQCjFIi9heenyDu14VO6Vok2EmqR6aZMF
 6pIqdOqv+m/xxJGFWLjYiZO5zMNcrEsd0ypNXmXXxDauDb/JZlkE88SfiUJaOpFd
 hmh7nYRjCXkO3/JHSugIyN4xnYuUgAgIJGnloRfATppfd+rkB/u5mf29jl54edRK
 +lhkYCvWP+cACQ==
 =BzA6
 -----END PGP SIGNATURE-----

Merge tag 'efi-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull EFI fixes from Thomas Gleixner:
 "Two EFI fixes:

   - Prevent a race and buffer overflow in the sysfs efivars interface
     which causes kernel memory corruption.

   - Add the missing NULL pointer checks in efivar_store_raw()"

* tag 'efi-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Add a sanity check to efivar_store_raw()
  efi: Fix a race and a buffer overflow while reading efivars via sysfs
2020-03-15 12:42:03 -07:00
Joakim Zhang
705dcca91d firmware: imx: scu-pd: add power domain for I2C and INTMUX in CM40 SS
Add power domain for I2C and INTMUX in CM40 SS.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-10 11:30:49 +08:00
Tejas Patel
4b9cbf5084 arm64: zynqmp: Make zynqmp_firmware driver optional
Make zynqmp_firmware driver as optional to disable it, if user don't
want to use default zynqmp firmware interface.

Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-03-09 14:58:24 +01:00
Greg Kroah-Hartman
9a2dd57059 Merge 5.6-rc5 into driver-core-next
We need the driver core and debugfs changes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-09 08:41:53 +01:00
Linus Torvalds
62790268e4 ARM: SoC fixes
We've been accruing these for a couple of weeks, so the batch is a bit
 bigger than usual.
 
 Largest delta is due to a led-bl driver that is added -- there was
 a miscommunication before the merge window and the driver didn't make it
 in. Due to this, the platforms needing it regressed. At this point, it
 seemed easier to add the new driver than unwind the changes.
 
 Besides that, there are a handful of various fixes:
 
  - AMD tee memory leak fix
 
  - A handful of fixlets for i.MX SCU communication
 
  - A few maintainers woke up and realized DEBUG_FS had been missing for
    a while, so a few updates of that.
 
  ... and the usual collection of smaller fixes to various platforms.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl5lhi0PHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3C6gQAJHXpED85K94DH2jycwMFkWdGh+DnR1ATDaK
 +zK04ZanoQrtGi0mK0KY8DMaYCGCKvAgvBbRYdNXPK1S2DQfpZceSTiAN7fh6NJ2
 F2XOGocH+IWrYmB+OA/rG6Sv2PFHibH34zf7TQ5w29jxCgv6zUTGF5qOoAnrhQzF
 SJNO08Ew0TjZ8mYXIoDHLsHaThT3rLF5f9yNMO0eG6gHrFKZHFfqhsDLqG6nSk+z
 L1M+WsfbxM0ijZDlIdJmxQLi4AlYkj3l8te4ikM6lngVSvQyYyEpnS2vw6h0OrZ9
 y6PYw+gAzDOZgFSHqwwH/Ha2Or6eqS4eAv5JvIEqGhGslzNvmWc8FzElIG4qJKbu
 sshrcmTSe0Dt7W0zR8dsCY6tA2Ze1hpxbOpuhoh4H+dngANKAAMlko5s4Vw76ZYy
 B5mryFkyzyLI2QcZK/QmVQq2KSoeBOUg2SUtOrbBb5xQhhKCwhJBmJ0lw8H5O4dA
 TRNXL3p1ydve0z3DIKYCzM++MX1EJEa9O4uMTxKDPB6P9XrKvkx0rwC7wepc00jf
 /aXdVQsaQvnOYVs1R5oGISWLrheSJ28tHi3dI+xAdkdA26WWzPfomK9R7ok1/91T
 uuTpfmK6uhMvPkfg85/7n3/sojS6K9c0cP5wdd8Y0d2avvgQHCISgNZOZf3vlaYH
 xEcSJ4Vd
 =gCNz
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "We've been accruing these for a couple of weeks, so the batch is a bit
  bigger than usual.

  Largest delta is due to a led-bl driver that is added -- there was a
  miscommunication before the merge window and the driver didn't make it
  in. Due to this, the platforms needing it regressed. At this point, it
  seemed easier to add the new driver than unwind the changes.

  Besides that, there are a handful of various fixes:

   - AMD tee memory leak fix

   - A handful of fixlets for i.MX SCU communication

   - A few maintainers woke up and realized DEBUG_FS had been missing
     for a while, so a few updates of that.

  ... and the usual collection of smaller fixes to various platforms"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (37 commits)
  ARM: socfpga_defconfig: Add back DEBUG_FS
  arm64: dts: socfpga: agilex: Fix gmac compatible
  ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS
  arm64: dts: meson: fix gxm-khadas-vim2 wifi
  arm64: dts: meson-sm1-sei610: add missing interrupt-names
  ARM: meson: Drop unneeded select of COMMON_CLK
  ARM: dts: bcm2711: Add pcie0 alias
  ARM: dts: bcm283x: Add missing properties to the PWR LED
  tee: amdtee: fix memory leak in amdtee_open_session()
  ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set
  arm: dts: dra76x: Fix mmc3 max-frequency
  ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes
  bus: ti-sysc: Fix 1-wire reset quirk
  ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value
  soc: imx-scu: Align imx sc msg structs to 4
  firmware: imx: Align imx_sc_msg_req_cpu_start to 4
  firmware: imx: scu-pd: Align imx sc msg structs to 4
  firmware: imx: misc: Align imx sc msg structs to 4
  firmware: imx: scu: Ensure sequential TX
  ARM: dts: imx7-colibri: Fix frequency for sd/mmc
  ...
2020-03-08 17:36:22 -07:00
Arvind Sankar
0347d8c28c efi/x86: Fix cast of image argument
handle_protocol() expects void **, not void *.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200305143642.820865-1-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-28-ardb@kernel.org
2020-03-08 10:00:08 +01:00
Ard Biesheuvel
ac82d35699 efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations
The header flag XLF_CAN_BE_LOADED_ABOVE_4G will inform us whether
allocations above 4 GiB for kernel, command line, etc are permitted,
so we take it into account when calling efi_allocate_pages() etc.

However, CONFIG_EFI_STUB implies CONFIG_RELOCATABLE, and so the flag
is guaranteed to be set on x86_64 builds, whereas i386 builds are
guaranteed to run under firmware that will not allocate above 4 GB
in the first place.

So drop the check, and just pass ULONG_MAX as the upper bound for
all allocations.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303225054.28741-1-ardb@kernel.org
Link: https://lore.kernel.org/r/20200308080859.21568-27-ardb@kernel.org
2020-03-08 10:00:07 +01:00
Vladis Dronov
8d8ab66a71 efi: Fix a mistype in comments mentioning efivar_entry_iter_begin()
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200305084041.24053-4-vdronov@redhat.com
Link: https://lore.kernel.org/r/20200308080859.21568-26-ardb@kernel.org
2020-03-08 10:00:07 +01:00
Masahiro Yamada
2fb2c17993 efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux
drivers/firmware/efi/libstub/Makefile builds a static library, which
is not linked into the main vmlinux target in the ordinary way [arm64],
or at all [ARM, x86].

Since commit:

  7f2084fa55 ("[kbuild] handle exports in lib-y objects reliably")

any Makefile using lib-y generates lib-ksyms.o which is linked into vmlinux.

In this case, the following garbage object is linked into vmlinux.

  drivers/firmware/efi/libstub/lib-ksyms.o

We do not want to follow the default linking rules for static libraries
built under libstub/ so using subdir-y instead of obj-y is the correct
way to descend into this directory.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
[ardb: update commit log to clarify that arm64 deviates in this respect]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200305055047.6097-1-masahiroy@kernel.org
Link: https://lore.kernel.org/r/20200308080859.21568-23-ardb@kernel.org
2020-03-08 10:00:06 +01:00
Ard Biesheuvel
dd09fad9d2 efi/x86: Ignore the memory attributes table on i386
Commit:

  3a6b6c6fb2 ("efi: Make EFI_MEMORY_ATTRIBUTES_TABLE initialization common across all architectures")

moved the call to efi_memattr_init() from ARM specific to the generic
EFI init code, in order to be able to apply the restricted permissions
described in that table on x86 as well.

We never enabled this feature fully on i386, and so mapping and
reserving this table is pointless. However, due to the early call to
memblock_reserve(), the memory bookkeeping gets confused to the point
where it produces the splat below when we try to map the memory later
on:

  ------------[ cut here ]------------
  ioremap on RAM at 0x3f251000 - 0x3fa1afff
  WARNING: CPU: 0 PID: 0 at arch/x86/mm/ioremap.c:166 __ioremap_caller ...
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.20.0 #48
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
  EIP: __ioremap_caller.constprop.0+0x249/0x260
  Code: 90 0f b7 05 4e 38 40 de 09 45 e0 e9 09 ff ff ff 90 8d 45 ec c6 05 ...
  EAX: 00000029 EBX: 00000000 ECX: de59c228 EDX: 00000001
  ESI: 3f250fff EDI: 00000000 EBP: de3edf20 ESP: de3edee0
  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00200296
  CR0: 80050033 CR2: ffd17000 CR3: 1e58c000 CR4: 00040690
  Call Trace:
   ioremap_cache+0xd/0x10
   ? old_map_region+0x72/0x9d
   old_map_region+0x72/0x9d
   efi_map_region+0x8/0xa
   efi_enter_virtual_mode+0x260/0x43b
   start_kernel+0x329/0x3aa
   i386_start_kernel+0xa7/0xab
   startup_32_smp+0x164/0x168
  ---[ end trace e15ccf6b9f356833 ]---

Let's work around this by disregarding the memory attributes table
altogether on i386, which does not result in a loss of functionality
or protection, given that we never consumed the contents.

Fixes: 3a6b6c6fb2 ("efi: Make EFI_MEMORY_ATTRIBUTES_TABLE ... ")
Tested-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200304165917.5893-1-ardb@kernel.org
Link: https://lore.kernel.org/r/20200308080859.21568-21-ardb@kernel.org
2020-03-08 09:58:23 +01:00
Arvind Sankar
d5cdf4cfea efi/x86: Don't relocate the kernel unless necessary
Add alignment slack to the PE image size, so that we can realign the
decompression buffer within the space allocated for the image.

Only relocate the kernel if it has been loaded at an unsuitable address:

 - Below LOAD_PHYSICAL_ADDR, or
 - Above 64T for 64-bit and 512MiB for 32-bit

For 32-bit, the upper limit is conservative, but the exact limit can be
difficult to calculate.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303221205.4048668-6-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-20-ardb@kernel.org
2020-03-08 09:58:22 +01:00
Arvind Sankar
1887c9b653 efi/x86: Decompress at start of PE image load address
When booted via PE loader, define image_offset to hold the offset of
startup_32() from the start of the PE image, and use it as the start of
the decompression buffer.

[ mingo: Fixed the grammar in the comments. ]

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303221205.4048668-3-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-17-ardb@kernel.org
2020-03-08 09:58:19 +01:00
Ard Biesheuvel
f3fa0efce2 efi/libstub/x86: Deal with exit() boot service returning
Even though it is uncommon, there are cases where the Exit() EFI boot
service might return, e.g., when we were booted via the EFI handover
protocol from OVMF and the kernel image was specified on the command
line, in which case Exit() attempts to terminate the boot manager,
which is not an EFI application itself.

So let's drop into an infinite loop instead of randomly executing code
that isn't expecting it.

Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
[ardb: put 'hlt' in deadloop]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200303080648.21427-1-ardb@kernel.org
Link: https://lore.kernel.org/r/20200308080859.21568-15-ardb@kernel.org
2020-03-08 09:58:18 +01:00