Make it plain that this takes the head page (which before this point
was just an assumption, but is now enforced by the compiler).
Link: https://lkml.kernel.org/r/20231213215842.671461-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Make it plain that this takes the head page (which before this point
was just an assumption, but is now enforced by the compiler).
Link: https://lkml.kernel.org/r/20231213215842.671461-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both callers now have a folio, so pass that in instead of the page.
Removes a few hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20231213215842.671461-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "More swap folio conversions".
These all seem like fairly straightforward conversions to me. A lot of
compound_head() calls get removed. And page_swap_info(), which is nice.
This patch (of 13):
Move the folio->page conversion into the callers that actually want that.
Most of the callers are happier with the folio anyway. If the
page_allocated boolean is set, the folio allocated is of order-0, so it is
safe to pass the page directly to swap_readpage().
Link: https://lkml.kernel.org/r/20231213215842.671461-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231213215842.671461-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
First of all, we need to rename acomp_ctx->dstmem field to buffer, since
we are now using for purposes other than compression.
Then we change per-cpu mutex and buffer to per-acomp_ctx, since them
belong to the acomp_ctx and are necessary parts when used in the
compress/decompress contexts.
So we can remove the old per-cpu mutex and dstmem.
Link: https://lkml.kernel.org/r/20231213-zswap-dstmem-v5-5-9382162bbf05@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Chris Li <chrisl@kernel.org> (Google)
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Also after the common decompress part goes to __zswap_load(), we can
cleanup the zswap_writeback_entry() a little.
Link: https://lkml.kernel.org/r/20231213-zswap-dstmem-v5-4-9382162bbf05@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org> (Google)
Cc: Barry Song <21cnbao@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After the common decompress part goes to __zswap_load(), we can cleanup
the zswap_load() a little.
Link: https://lkml.kernel.org/r/20231213-zswap-dstmem-v5-3-9382162bbf05@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Chis Li <chrisl@kernel.org> (Google)
Cc: Barry Song <21cnbao@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
zswap_load() and zswap_writeback_entry() have the same part that
decompress the data from zswap_entry to page, so refactor out the common
part as __zswap_load(entry, page).
Link: https://lkml.kernel.org/r/20231213-zswap-dstmem-v5-2-9382162bbf05@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Chris Li <chrisl@kernel.org> (Google)
Cc: Barry Song <21cnbao@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/zswap: dstmem reuse optimizations and cleanups", v5.
The problem this series tries to optimize is that zswap_load() and
zswap_writeback_entry() have to malloc a temporary memory to support
!zpool_can_sleep_mapped(). We can avoid it by reusing the percpu
crypto_acomp_ctx->dstmem, which is also used by zswap_store() and
protected by the same percpu crypto_acomp_ctx->mutex.
This patch (of 5):
In the !zpool_can_sleep_mapped() case such as zsmalloc, we need to first
copy the entry->handle memory to a temporary memory, which is allocated
using kmalloc.
Obviously we can reuse the per-compressor dstmem to avoid allocating every
time, since it's percpu-compressor and protected in percpu mutex.
Link: https://lkml.kernel.org/r/20231213-zswap-dstmem-v5-0-9382162bbf05@bytedance.com
Link: https://lkml.kernel.org/r/20231213-zswap-dstmem-v5-1-9382162bbf05@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Chris Li <chrisl@kernel.org> (Google)
Cc: Barry Song <21cnbao@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This documents the KSM advisor and its new knobs in /sys/fs/kernel/mm.
Link: https://lkml.kernel.org/r/20231218231054.1625219-5-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This adds a new tracepoint for the ksm advisor. It reports the last scan
time, the new setting of the pages_to_scan parameter and the average cpu
percent usage of the ksmd background thread for the last scan.
Link: https://lkml.kernel.org/r/20231218231054.1625219-4-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This adds four new knobs for the KSM advisor to influence its behaviour.
The knobs are:
- advisor_mode:
none: no advisor (default)
scan-time: scan time advisor
- advisor_max_cpu: 70 (default, cpu usage percent)
- advisor_min_pages_to_scan: 500 (default)
- advisor_max_pages_to_scan: 30000 (default)
- advisor_target_scan_time: 200 (default in seconds)
The new values will take effect on the next scan round.
Link: https://lkml.kernel.org/r/20231218231054.1625219-3-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/ksm: Add ksm advisor", v5.
What is the KSM advisor?
=========================
The ksm advisor automatically manages the pages_to_scan setting to achieve
a target scan time. The target scan time defines how many seconds it
should take to scan all the candidate KSM pages. In other words the
pages_to_scan rate is changed by the advisor to achieve the target scan
time.
Why do we need a KSM advisor?
==============================
The number of candidate pages for KSM is dynamic. It can often be
observed that during the startup of an application more candidate pages
need to be processed. Without an advisor the pages_to_scan parameter
needs to be sized for the maximum number of candidate pages. With the
scan time advisor the pages_to_scan parameter based can be changed based
on demand.
Algorithm
==========
The algorithm calculates the change value based on the target scan time
and the previous scan time. To avoid pertubations an exponentially
weighted moving average is applied.
The algorithm has a max and min
value to:
- guarantee responsiveness to changes
- to limit CPU resource consumption
Parameters to influence the KSM scan advisor
=============================================
The respective parameters are:
- ksm_advisor_mode
0: None (default), 1: scan time advisor
- ksm_advisor_target_scan_time
how many seconds a scan should of all candidate pages take
- ksm_advisor_max_cpu
upper limit for the cpu usage in percent of the ksmd background thread
The initial value and the max value for the pages_to_scan parameter can
be limited with:
- ksm_advisor_min_pages_to_scan
minimum value for pages_to_scan per batch
- ksm_advisor_max_pages_to_scan
maximum value for pages_to_scan per batch
The default settings for the above two parameters should be suitable for
most workloads.
The parameters are exposed as knobs in /sys/kernel/mm/ksm. By default the
scan time advisor is disabled.
Currently there are two advisors:
- none and
- scan-time.
Resource savings
=================
Tests with various workloads have shown considerable CPU savings. Most
of the workloads I have investigated have more candidate pages during
startup. Once the workload is stable in terms of memory, the number of
candidate pages is reduced. Without the advisor, the pages_to_scan needs
to be sized for the maximum number of candidate pages. So having this
advisor definitely helps in reducing CPU consumption.
For the instagram workload, the advisor achieves a 25% CPU reduction.
Once the memory is stable, the pages_to_scan parameter gets reduced to
about 40% of its max value.
The new advisor works especially well if the smart scan feature is also
enabled.
How is defining a target scan time better?
===========================================
For an administrator it is more logical to set a target scan time.. The
administrator can determine how many pages are scanned on each scan.
Therefore setting a target scan time makes more sense.
In addition the administrator might have a good idea about the memory
sizing of its respective workloads.
Setting cpu limits is easier than setting The pages_to_scan parameter. The
pages_to_scan parameter is per batch. For the administrator it is difficult
to set the pages_to_scan parameter.
Tracing
=======
A new tracing event has been added for the scan time advisor. The new
trace event is called ksm_advisor. It reports the scan time, the new
pages_to_scan setting and the cpu usage of the ksmd background thread.
Other approaches
=================
Approach 1: Adapt pages_to_scan after processing each batch. If KSM
merges pages, increase the scan rate, if less KSM pages, reduce the
the pages_to_scan rate. This doesn't work too well. While it increases
the pages_to_scan for a short period, but generally it ends up with a
too low pages_to_scan rate.
Approach 2: Adapt pages_to_scan after each scan. The problem with that
approach is that the calculated scan rate tends to be high. The more
aggressive KSM scans, the more pages it can de-duplicate.
There have been earlier attempts at an advisor:
propose auto-run mode of ksm and its tests
(https://marc.info/?l=linux-mm&m=166029880214485&w=2)
This patch (of 5):
This adds the ksm advisor. The ksm advisor automatically manages the
pages_to_scan setting to achieve a target scan time. The target scan time
defines how many seconds it should take to scan all the candidate KSM
pages. In other words the pages_to_scan rate is changed by the advisor to
achieve the target scan time. The algorithm has a max and min value to:
- guarantee responsiveness to changes
- limit CPU resource consumption
The respective parameters are:
- ksm_advisor_target_scan_time (how many seconds a scan should take)
- ksm_advisor_max_cpu (maximum value for cpu percent usage)
- ksm_advisor_min_pages (minimum value for pages_to_scan per batch)
- ksm_advisor_max_pages (maximum value for pages_to_scan per batch)
The algorithm calculates the change value based on the target scan time
and the previous scan time. To avoid pertubations an exponentially
weighted moving average is applied.
The advisor is managed by two main parameters: target scan time,
cpu max time for the ksmd background thread. These parameters determine
how aggresive ksmd scans.
In addition there are min and max values for the pages_to_scan parameter
to make sure that its initial and max values are not set too low or too
high. This ensures that it is able to react to changes quickly enough.
The default values are:
- target scan time: 200 secs
- max cpu: 70%
- min pages: 500
- max pages: 30000
By default the advisor is disabled. Currently there are two advisors:
none and scan-time.
Tests with various workloads have shown considerable CPU savings. Most of
the workloads I have investigated have more candidate pages during
startup, once the workload is stable in terms of memory, the number of
candidate pages is reduced. Without the advisor, the pages_to_scan needs
to be sized for the maximum number of candidate pages. So having this
advisor definitely helps in reducing CPU consumption.
For the instagram workload, the advisor achieves a 25% CPU reduction.
Once the memory is stable, the pages_to_scan parameter gets reduced to
about 40% of its max value.
Link: https://lkml.kernel.org/r/20231218231054.1625219-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20231218231054.1625219-2-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All callers have now been converted to folio_add_new_anon_rmap() and
folio_add_lru_vma() so we can remove the wrapper.
Link: https://lkml.kernel.org/r/20231211162214.2146080-10-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace three calls to compound_head() with one.
Link: https://lkml.kernel.org/r/20231211162214.2146080-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replaces five calls to compound_head() with one.
Link: https://lkml.kernel.org/r/20231211162214.2146080-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Refer to folio_add_new_anon_rmap() instead.
Link: https://lkml.kernel.org/r/20231211162214.2146080-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
folio_add_new_anon_rmap() no longer works this way, so just remove the
entire example.
Link: https://lkml.kernel.org/r/20231211162214.2146080-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We already have the folio in these functions, we just need to use it.
folio_add_new_anon_rmap() didn't exist at the time they were converted to
folios.
Link: https://lkml.kernel.org/r/20231211162214.2146080-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The page in question is either freshly allocated or known to be in
the swap cache; these assertions are not particularly useful.
Link: https://lkml.kernel.org/r/20231212164813.2540119-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Finish two folio conversions".
Most callers of page_add_new_anon_rmap() and
lru_cache_add_inactive_or_unevictable() have been converted to their folio
equivalents, but there are still a few stragglers. There's a bit of
preparatory work in ksm and unuse_pte(), but after that it's pretty
mechanical.
This patch (of 9):
Accept a folio as an argument and return a folio result. Removes a call
to compound_head() in do_swap_page(), and prevents folio & page from
getting out of sync in unuse_pte().
Reviewed-by: David Hildenbrand <david@redhat.com>
[willy@infradead.org: fix smatch warning]
Link: https://lkml.kernel.org/r/ZXnPtblC6A1IkyAB@casper.infradead.org
[david@redhat.com: only adjust the page if the folio changed]
Link: https://lkml.kernel.org/r/6a8f2110-fa91-4c10-9eae-88315309a6e3@redhat.com
Link: https://lkml.kernel.org/r/20231211162214.2146080-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231211162214.2146080-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add tests for new UFFDIO_MOVE ioctl which uses uffd to move source into
destination buffer while checking the contents of both after the move.
After the operation the content of the destination buffer should match the
original source buffer's content while the source buffer should be zeroed.
Separate tests are designed for PMD aligned and unaligned cases because
they utilize different code paths in the kernel.
Link: https://lkml.kernel.org/r/20231206103702.3873743-6-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently each test can specify unique operations using uffd_test_ops,
however these operations are per-memory type and not per-test. Add
uffd_test_case_ops which each test case can customize for its own needs
regardless of the memory type being used. Pre- and post-allocation
operations are added, some of which will be used in the next patch to
implement test-specific operations like madvise after memory is allocated
but before it is accessed.
Link: https://lkml.kernel.org/r/20231206103702.3873743-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
uffd_test_ctx_clear() is being called from uffd_test_ctx_init() to unmap
areas used in the previous test run. This approach is problematic because
while unmapping areas uffd_test_ctx_clear() uses page_size and nr_pages
which might differ from one test run to another. Fix this by calling
uffd_test_ctx_clear() after each test is done.
Link: https://lkml.kernel.org/r/20231206103702.3873743-4-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement the uABI of UFFDIO_MOVE ioctl.
UFFDIO_COPY performs ~20% better than UFFDIO_MOVE when the application
needs pages to be allocated [1]. However, with UFFDIO_MOVE, if pages are
available (in userspace) for recycling, as is usually the case in heap
compaction algorithms, then we can avoid the page allocation and memcpy
(done by UFFDIO_COPY). Also, since the pages are recycled in the
userspace, we avoid the need to release (via madvise) the pages back to
the kernel [2].
We see over 40% reduction (on a Google pixel 6 device) in the compacting
thread's completion time by using UFFDIO_MOVE vs. UFFDIO_COPY. This was
measured using a benchmark that emulates a heap compaction implementation
using userfaultfd (to allow concurrent accesses by application threads).
More details of the usecase are explained in [2]. Furthermore,
UFFDIO_MOVE enables moving swapped-out pages without touching them within
the same vma. Today, it can only be done by mremap, however it forces
splitting the vma.
[1] https://lore.kernel.org/all/1425575884-2574-1-git-send-email-aarcange@redhat.com/
[2] https://lore.kernel.org/linux-mm/CA+EESO4uO84SSnBhArH4HvLNhaUQ5nZKNKXqxRCyjniNVjp0Aw@mail.gmail.com/
Update for the ioctl_userfaultfd(2) manpage:
UFFDIO_MOVE
(Since Linux xxx) Move a continuous memory chunk into the
userfault registered range and optionally wake up the blocked
thread. The source and destination addresses and the number of
bytes to move are specified by the src, dst, and len fields of
the uffdio_move structure pointed to by argp:
struct uffdio_move {
__u64 dst; /* Destination of move */
__u64 src; /* Source of move */
__u64 len; /* Number of bytes to move */
__u64 mode; /* Flags controlling behavior of move */
__s64 move; /* Number of bytes moved, or negated error */
};
The following value may be bitwise ORed in mode to change the
behavior of the UFFDIO_MOVE operation:
UFFDIO_MOVE_MODE_DONTWAKE
Do not wake up the thread that waits for page-fault
resolution
UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES
Allow holes in the source virtual range that is being moved.
When not specified, the holes will result in ENOENT error.
When specified, the holes will be accounted as successfully
moved memory. This is mostly useful to move hugepage aligned
virtual regions without knowing if there are transparent
hugepages in the regions or not, but preventing the risk of
having to split the hugepage during the operation.
The move field is used by the kernel to return the number of
bytes that was actually moved, or an error (a negated errno-
style value). If the value returned in move doesn't match the
value that was specified in len, the operation fails with the
error EAGAIN. The move field is output-only; it is not read by
the UFFDIO_MOVE operation.
The operation may fail for various reasons. Usually, remapping of
pages that are not exclusive to the given process fail; once KSM
might deduplicate pages or fork() COW-shares pages during fork()
with child processes, they are no longer exclusive. Further, the
kernel might only perform lightweight checks for detecting whether
the pages are exclusive, and return -EBUSY in case that check fails.
To make the operation more likely to succeed, KSM should be
disabled, fork() should be avoided or MADV_DONTFORK should be
configured for the source VMA before fork().
This ioctl(2) operation returns 0 on success. In this case, the
entire area was moved. On error, -1 is returned and errno is
set to indicate the error. Possible errors include:
EAGAIN The number of bytes moved (i.e., the value returned in
the move field) does not equal the value that was
specified in the len field.
EINVAL Either dst or len was not a multiple of the system page
size, or the range specified by src and len or dst and len
was invalid.
EINVAL An invalid bit was specified in the mode field.
ENOENT
The source virtual memory range has unmapped holes and
UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES is not set.
EEXIST
The destination virtual memory range is fully or partially
mapped.
EBUSY
The pages in the source virtual memory range are either
pinned or not exclusive to the process. The kernel might
only perform lightweight checks for detecting whether the
pages are exclusive. To make the operation more likely to
succeed, KSM should be disabled, fork() should be avoided
or MADV_DONTFORK should be configured for the source virtual
memory area before fork().
ENOMEM Allocating memory needed for the operation failed.
ESRCH
The target process has exited at the time of a UFFDIO_MOVE
operation.
Link: https://lkml.kernel.org/r/20231206103702.3873743-3-surenb@google.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "userfaultfd move option", v6.
This patch series introduces UFFDIO_MOVE feature to userfaultfd, which has
long been implemented and maintained by Andrea in his local tree [1], but
was not upstreamed due to lack of use cases where this approach would be
better than allocating a new page and copying the contents. Previous
upstraming attempts could be found at [6] and [7].
UFFDIO_COPY performs ~20% better than UFFDIO_MOVE when the application
needs pages to be allocated [2]. However, with UFFDIO_MOVE, if pages are
available (in userspace) for recycling, as is usually the case in heap
compaction algorithms, then we can avoid the page allocation and memcpy
(done by UFFDIO_COPY). Also, since the pages are recycled in the
userspace, we avoid the need to release (via madvise) the pages back to
the kernel [3]. We see over 40% reduction (on a Google pixel 6 device) in
the compacting thread's completion time by using UFFDIO_MOVE vs.
UFFDIO_COPY. This was measured using a benchmark that emulates a heap
compaction implementation using userfaultfd (to allow concurrent accesses
by application threads). More details of the usecase are explained in
[3].
Furthermore, UFFDIO_MOVE enables moving swapped-out pages without
touching them within the same vma. Today, it can only be done by mremap,
however it forces splitting the vma.
TODOs for follow-up improvements:
- cross-mm support. Known differences from single-mm and missing pieces:
- memcg recharging (might need to isolate pages in the process)
- mm counters
- cross-mm deposit table moves
- cross-mm test
- document the address space where src and dest reside in struct
uffdio_move
- TLB flush batching. Will require extensive changes to PTL locking in
move_pages_pte(). OTOH that might let us reuse parts of mremap code.
This patch (of 5):
For now, folio_move_anon_rmap() was only used to move a folio to a
different anon_vma after fork(), whereby the root anon_vma stayed
unchanged. For that, it was sufficient to hold the folio lock when
calling folio_move_anon_rmap().
However, we want to make use of folio_move_anon_rmap() to move folios
between VMAs that have a different root anon_vma. As folio_referenced()
performs an RMAP walk without holding the folio lock but only holding the
anon_vma in read mode, holding the folio lock is insufficient.
When moving to an anon_vma with a different root anon_vma, we'll have to
hold both, the folio lock and the anon_vma lock in write mode.
Consequently, whenever we succeeded in folio_lock_anon_vma_read() to
read-lock the anon_vma, we have to re-check if the mapping was changed in
the meantime. If that was the case, we have to retry.
Note that folio_move_anon_rmap() must only be called if the anon page is
exclusive to a process, and must not be called on KSM folios.
This is a preparation for UFFDIO_MOVE, which will hold the folio lock, the
anon_vma lock in write mode, and the mmap_lock in read mode.
Link: https://lkml.kernel.org/r/20231206103702.3873743-1-surenb@google.com
Link: https://lkml.kernel.org/r/20231206103702.3873743-2-surenb@google.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: kernel-team@android.com
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both __block_write_full_folio() and block_read_full_folio() assumed that
block size <= PAGE_SIZE. Replace the shift with a divide, which is
probably cheaper than first calculating the shift. That lets us remove
block_size_bits() as these were the last callers.
Link: https://lkml.kernel.org/r/20231109210608.2252323-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When __block_write_begin_int() was converted to support folios, we did not
expect large folios to be passed to it. With the current work to support
large block size storage devices, this will no longer be true so change
the checks on 'from' and 'to' to be related to the size of the folio
instead of PAGE_SIZE. Also remove an assumption that the block size is
smaller than PAGE_SIZE.
Link: https://lkml.kernel.org/r/20231109210608.2252323-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If i_blkbits is larger than PAGE_SHIFT, we shift by a negative number,
which is undefined. It is safe to shift the block left as a block device
must be smaller than MAX_LFS_FILESIZE, which is guaranteed to fit in
loff_t.
Link: https://lkml.kernel.org/r/20231109210608.2252323-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
While sector_t is always defined as a u64 today, that hasn't always been
the case and it might not always be the same size as loff_t in the future.
Link: https://lkml.kernel.org/r/20231109210608.2252323-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We must not shift by a negative number so work in terms of a byte offset
to avoid the awkward shift left-or-right-depending-on-sign option. This
means we need to use check_mul_overflow() to ensure that a large block
number does not result in a wrap.
Link: https://lkml.kernel.org/r/20231109210608.2252323-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
[nathan@kernel.org: add cast in grow_buffers() to avoid a multiplication libcall]
Link: https://lkml.kernel.org/r/20231128-avoid-muloti4-grow_buffers-v1-1-bc3d0f0ec483@kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The calculation of block from index doesn't work for devices with a block
size larger than PAGE_SIZE as we end up shifting by a negative number.
Instead, calculate the number of the first block from the folio's position
in the block device. We no longer need to pass sizebits to
grow_dev_folio().
Link: https://lkml.kernel.org/r/20231109210608.2252323-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "More buffer_head cleanups", v2.
The first patch is a left-over from last cycle. The rest fix "obvious"
block size > PAGE_SIZE problems. I haven't tested with a large block size
setup (but I have done an ext4 xfstests run).
This patch (of 7):
Rename grow_dev_page() to grow_dev_folio() and make it return a bool.
Document what that bool means; it's more subtle than it first appears.
Also rename the 'failed' label to 'unlock' beacuse it's not exactly
'failed'. It just hasn't succeeded.
Link: https://lkml.kernel.org/r/20231109210608.2252323-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the same splat markers as panic does for easier matching by external
tools scanning kernel dmesg for splats.
Link: https://lkml.kernel.org/r/20231218135339.23209-1-bp@alien8.de
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is redundant code in __free_pages_ok(). Use free_one_page()
simplify it.
Link: https://lkml.kernel.org/r/20231216030503.2126130-1-yajun.deng@linux.dev
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The last range stored in maple tree is typically quite large. By checking
if it exceeds the sum of the remaining ranges in that node, it is possible
to avoid checking all other gaps.
Running the maple tree test suite in user mode almost always results in a
near 100% hit rate for this optimization.
Link: https://lkml.kernel.org/r/20231215074632.82045-1-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmap() has been deprecated in favor of kmap_local_page().
Therefore, replace kmap() with kmap_local_page() in mm/memory.c.
There are two main problems with kmap(): (1) It comes with an overhead as
the mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap's pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page-faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. The tasks can
be preempted and, when they are scheduled to run again, the kernel virtual
addresses are restored and still valid.
Obviously, thread locality implies that the kernel virtual addresses
returned by kmap_local_page() are only valid in the context of the callers
(i.e., they cannot be handed to other threads).
The use of kmap_local_page() in mm/memory.c does not break the
above-mentioned assumption, so it is allowed and preferred.
Link: https://lkml.kernel.org/r/20231215084417.2002370-1-fabio.maria.de.francesco@linux.intel.com
Link: https://lkml.kernel.org/r/20231214081039.1919328-1-fabio.maria.de.francesco@linux.intel.com
Signed-off-by: Fabio M. De Francesco <fabio.maria.de.francesco@linux.intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are eight command inputs for 'state' DAMON sysfs file, and those are
verbosely explained in multiple paragraphs. It is not easy to find
explanation of specific command, and getting whole picture of supported
commands. Replace the paragraphs with a list.
Link: https://lkml.kernel.org/r/20231213190338.54146-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'Sysfs Files Hierarchy' section of DAMON usage document shows whole
picture of the interface. Then sections for detailed explanation of the
files follow. Due to the amount of the files, navigating between the
whole picture and the section for specific files sometimes require no
subtle amount of scrolling. Add links from the whole picture to the
dedicated sections for making the navigation easier.
Link: https://lkml.kernel.org/r/20231213190338.54146-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The label for context DAMON sysfs directory section is having name
sysfs_contexts. The name would be better to be used for the contexts
directory. Rename it to represent a single context.
Link: https://lkml.kernel.org/r/20231213190338.54146-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The execution model and data structures section at the end of the design
document is briefly explaining how DAMON works overall. Knowing that
first may help better drawing the overall picture. It may also help
better understanding following detailed sections. Move it to the
beginning of the document.
Link: https://lkml.kernel.org/r/20231213190338.54146-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 35f5d94187 ("mm/damon: implement a function for max nr_accesses
safe calculation") has fixed an overflow bug that could cause
divide-by-zero. Add a kunit test for the bug to ensure similar bugs are
not introduced again.
Link: https://lkml.kernel.org/r/20231213190338.54146-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
