Commit beae836e9c ("ovl: temporarily disable appending lowedirs")
removed the ability to append lowerdirs with syntax lowerdir=":<path>".
Remove leftover code and comments that are irrelevant with lowerdir
append mode disabled.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
An xattr whiteout (called "xwhiteout" in the code) is a reguar file of
zero size with the "overlay.whiteout" xattr set. A file like this in a
directory with the "overlay.whiteouts" xattrs set will be treated the
same way as a regular whiteout.
The "overlay.whiteouts" directory xattr is used in order to
efficiently handle overlay checks in readdir(), as we only need to
checks xattrs in affected directories.
The advantage of this kind of whiteout is that they can be escaped
using the standard overlay xattr escaping mechanism. So, a file with a
"overlay.overlay.whiteout" xattr would be unescaped to
"overlay.whiteout", which could then be consumed by another overlayfs
as a whiteout.
Overlayfs itself doesn't create whiteouts like this, but a userspace
mechanism could use this alternative mechanism to convert images that
may contain whiteouts to be used with overlayfs.
To work as a whiteout for both regular overlayfs mounts as well as
userxattr mounts both the "user.overlay.whiteout*" and the
"trusted.overlay.whiteout*" xattrs will need to be created.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
There are cases where you want to use an overlayfs mount as a lowerdir
for another overlayfs mount. For example, if the system rootfs is on
overlayfs due to composefs, or to make it volatile (via tmps), then
you cannot currently store a lowerdir on the rootfs. This means you
can't e.g. store on the rootfs a prepared container image for use
using overlayfs.
To work around this, we introduce an escapment mechanism for overlayfs
xattrs. Whenever the lower/upper dir has a xattr named
"overlay.overlay.XYZ", we list it as "overlay.XYZ" in listxattrs, and
when the user calls getxattr or setxattr on "overlay.XYZ", we apply to
"overlay.overlay.XYZ" in the backing directories.
This allows storing any kind of overlay xattrs in a overlayfs mount
that can be used as a lowerdir in another mount. It is possible to
stack this mechanism multiple times, such that
"overlay.overlay.overlay.XYZ" will survive two levels of overlay mounts,
however this is not all that useful in practice because of stack depth
limitations of overlayfs mounts.
Note: These escaped xattrs are copied to upper during copy-up.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
These match the ones for e.g. XATTR_TRUSTED_PREFIX_LEN.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
This moves the code from super.c and inode.c, and makes ovl_xattr_get/set()
static.
This is in preparation for doing more work on xattrs support.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
When lower fs is a nested overlayfs, calling encode_fh() on a lower
directory dentry may trigger copy up and take sb_writers on the upper fs
of the lower nested overlayfs.
The lower nested overlayfs may have the same upper fs as this overlayfs,
so nested sb_writers lock is illegal.
Move all the callers that encode lower fh to before ovl_want_write().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
overlayfs file open (ovl_maybe_lookup_lowerdata) and overlay file llseek
take the ovl_inode_lock, without holding upper sb_writers.
In case of nested lower overlay that uses same upper fs as this overlay,
lockdep will warn about (possibly false positive) circular lock
dependency when doing open/llseek of lower ovl file during copy up with
our upper sb_writers held, because the locking ordering seems reverse to
the locking order in ovl_copy_up_start():
- lower ovl_inode_lock
- upper sb_writers
Let the copy up "transaction" keeps an elevated mnt write count on upper
mnt, but leaves taking upper sb_writers to lower level helpers only when
they actually need it. This allows to avoid holding upper sb_writers
during lower file open/llseek and prevents the lockdep warning.
Minimizing the scope of upper sb_writers during copy up is also needed
for fixing another possible deadlocks by a following patch.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Make the locking order of ovl_inode_lock() strictly between the two
vfs stacked layers, i.e.:
- ovl vfs locks: sb_writers, inode_lock, ...
- ovl_inode_lock
- upper vfs locks: sb_writers, inode_lock, ...
To that effect, move ovl_want_write() into the helpers ovl_nlink_start()
and ovl_copy_up_start which currently take the ovl_inode_lock() after
ovl_want_write().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
ovl_get_write_access() gets write access to upper mnt without taking
freeze protection on upper sb and ovl_start_write() only takes freeze
protection on upper sb.
These helpers will be used to breakup the large ovl_want_write() scope
during copy up into finer grained freeze protection scopes.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
ovl_copyattr() may be called concurrently from aio completion context
without any lock and that could lead to overlay inode attributes getting
permanently out of sync with real inode attributes.
Use ovl inode spinlock to protect ovl_copyattr().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
We want to protect concurrent updates of ovl inode size and mtime
(i.e. ovl_copyattr()) from aio completion context.
Punt write aio completion to a workqueue so that we can protect
ovl_copyattr() with a spinlock.
Export sb_init_dio_done_wq(), so that overlayfs can use its own
dio workqueue to punt aio completions.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/8620dfd3-372d-4ae0-aa3f-2fe97dda1bca@kernel.dk/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
If ovl file is opened O_APPEND, the underlying realfile is also
opened O_APPEND, so it makes sense to propagate the IOCB_APPEND flags
on sync writes to realfile, just as we do with aio writes.
Effectively, because sync ovl writes are protected by inode lock,
this change only makes a difference if the realfile is written to (size
extending writes) from underneath overlayfs. The behavior in this case
is undefined, so it is ok if we change the behavior (to fail the ovl
IOCB_APPEND write).
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Overlayfs implements its own function to translate iocb flags into rw
flags, so that they can be passed into another vfs call.
With commit ce71bfea20 ("fs: align IOCB_* flags with RWF_* flags")
Jens created a 1:1 matching between the iocb flags and rw flags,
simplifying the conversion.
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppYgAKCRCRxhvAZXjc
okIHAP9anLz1QDyMLH12ASuHjgBc0Of3jcB6NB97IWGpL4O21gEA46ohaD+vcJuC
YkBLU3lXqQ87nfu28ExFAzh10hG2jwM=
=m4pB
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode time accessor updates from Christian Brauner:
"This finishes the conversion of all inode time fields to accessor
functions as discussed on list. Changing timestamps manually as we
used to do before is error prone. Using accessors function makes this
robust.
It does not contain the switch of the time fields to discrete 64 bit
integers to replace struct timespec and free up space in struct inode.
But after this, the switch can be trivially made and the patch should
only affect the vfs if we decide to do it"
* tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits)
fs: rename inode i_atime and i_mtime fields
security: convert to new timestamp accessors
selinux: convert to new timestamp accessors
apparmor: convert to new timestamp accessors
sunrpc: convert to new timestamp accessors
mm: convert to new timestamp accessors
bpf: convert to new timestamp accessors
ipc: convert to new timestamp accessors
linux: convert to new timestamp accessors
zonefs: convert to new timestamp accessors
xfs: convert to new timestamp accessors
vboxsf: convert to new timestamp accessors
ufs: convert to new timestamp accessors
udf: convert to new timestamp accessors
ubifs: convert to new timestamp accessors
tracefs: convert to new timestamp accessors
sysv: convert to new timestamp accessors
squashfs: convert to new timestamp accessors
server: convert to new timestamp accessors
client: convert to new timestamp accessors
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppWAAKCRCRxhvAZXjc
okB2AP4jjoRErJBwj245OIDJqzoj4m4UVOVd0MH2AkiSpANczwD/TToChdpusY2y
qAYg1fQoGMbDVlb7Txaj9qI9ieCf9w0=
=2PXg
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs xattr updates from Christian Brauner:
"The 's_xattr' field of 'struct super_block' currently requires a
mutable table of 'struct xattr_handler' entries (although each handler
itself is const). However, no code in vfs actually modifies the
tables.
This changes the type of 's_xattr' to allow const tables, and modifies
existing file systems to move their tables to .rodata. This is
desirable because these tables contain entries with function pointers
in them; moving them to .rodata makes it considerably less likely to
be modified accidentally or maliciously at runtime"
* tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
const_structs.checkpatch: add xattr_handler
net: move sockfs_xattr_handlers to .rodata
shmem: move shmem_xattr_handlers to .rodata
overlayfs: move xattr tables to .rodata
xfs: move xfs_xattr_handlers to .rodata
ubifs: move ubifs_xattr_handlers to .rodata
squashfs: move squashfs_xattr_handlers to .rodata
smb: move cifs_xattr_handlers to .rodata
reiserfs: move reiserfs_xattr_handlers to .rodata
orangefs: move orangefs_xattr_handlers to .rodata
ocfs2: move ocfs2_xattr_handlers and ocfs2_xattr_handler_map to .rodata
ntfs3: move ntfs_xattr_handlers to .rodata
nfs: move nfs4_xattr_handlers to .rodata
kernfs: move kernfs_xattr_handlers to .rodata
jfs: move jfs_xattr_handlers to .rodata
jffs2: move jffs2_xattr_handlers to .rodata
hfsplus: move hfsplus_xattr_handlers to .rodata
hfs: move hfs_xattr_handlers to .rodata
gfs2: move gfs2_xattr_handlers_max to .rodata
fuse: move fuse_xattr_handlers to .rodata
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppQwAKCRCRxhvAZXjc
om2kAP4u+eLsrhJHfUPUttGUEkSkZE+5/s/f1A/1GcV51usLSgEAu8urxAnP49GW
INaDABXaFfKx8/KI/H2YFZPKGwlNEwY=
=PDDE
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.iov_iter' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull iov_iter updates from Christian Brauner:
"This contain's David's iov_iter cleanup work to convert the iov_iter
iteration macros to inline functions:
- Remove last_offset from iov_iter as it was only used by ITER_PIPE
- Add a __user tag on copy_mc_to_user()'s dst argument on x86 to
match that on powerpc and get rid of a sparse warning
- Convert iter->user_backed to user_backed_iter() in the sound PCM
driver
- Convert iter->user_backed to user_backed_iter() in a couple of
infiniband drivers
- Renumber the type enum so that the ITER_* constants match the order
in iterate_and_advance*()
- Since the preceding patch puts UBUF and IOVEC at 0 and 1, change
user_backed_iter() to just use the type value and get rid of the
extra flag
- Convert the iov_iter iteration macros to always-inline functions to
make the code easier to follow. It uses function pointers, but they
get optimised away
- Move the check for ->copy_mc to _copy_from_iter() and
copy_page_from_iter_atomic() rather than in memcpy_from_iter_mc()
where it gets repeated for every segment. Instead, we check once
and invoke a side function that can use iterate_bvec() rather than
iterate_and_advance() and supply a different step function
- Move the copy-and-csum code to net/ where it can be in proximity
with the code that uses it
- Fold memcpy_and_csum() in to its two users
- Move csum_and_copy_from_iter_full() out of line and merge in
csum_and_copy_from_iter() since the former is the only caller of
the latter
- Move hash_and_copy_to_iter() to net/ where it can be with its only
caller"
* tag 'vfs-6.7.iov_iter' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
iov_iter, net: Move hash_and_copy_to_iter() to net/
iov_iter, net: Merge csum_and_copy_from_iter{,_full}() together
iov_iter, net: Fold in csum_and_memcpy()
iov_iter, net: Move csum_and_copy_to/from_iter() to net/
iov_iter: Don't deal with iter->copy_mc in memcpy_from_iter_mc()
iov_iter: Convert iterate*() to inline funcs
iov_iter: Derive user-backedness from the iterator type
iov_iter: Renumber ITER_* constants
infiniband: Use user_backed_iter() to see if iterator is UBUF/IOVEC
sound: Fix snd_pcm_readv()/writev() to use iov access functions
iov_iter, x86: Be consistent about the __user tag on copy_mc_to_user()
iov_iter: Remove last_offset from iov_iter as it was for ITER_PIPE
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTpoQAAKCRCRxhvAZXjc
ovFNAQDgIRjXfZ1Ku+USxsRRdqp8geJVaNc3PuMmYhOYhUenqgEAmC1m+p0y31dS
P6+HlL16Mqgu0tpLCcJK9BibpDZ0Ew4=
=7yD1
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Rename and export helpers that get write access to a mount. They
are used in overlayfs to get write access to the upper mount.
- Print the pretty name of the root device on boot failure. This
helps in scenarios where we would usually only print
"unknown-block(1,2)".
- Add an internal SB_I_NOUMASK flag. This is another part in the
endless POSIX ACL saga in a way.
When POSIX ACLs are enabled via SB_POSIXACL the vfs cannot strip
the umask because if the relevant inode has POSIX ACLs set it might
take the umask from there. But if the inode doesn't have any POSIX
ACLs set then we apply the umask in the filesytem itself. So we end
up with:
(1) no SB_POSIXACL -> strip umask in vfs
(2) SB_POSIXACL -> strip umask in filesystem
The umask semantics associated with SB_POSIXACL allowed filesystems
that don't even support POSIX ACLs at all to raise SB_POSIXACL
purely to avoid umask stripping. That specifically means NFS v4 and
Overlayfs. NFS v4 does it because it delegates this to the server
and Overlayfs because it needs to delegate umask stripping to the
upper filesystem, i.e., the filesystem used as the writable layer.
This went so far that SB_POSIXACL is raised eve on kernels that
don't even have POSIX ACL support at all.
Stop this blatant abuse and add SB_I_NOUMASK which is an internal
superblock flag that filesystems can raise to opt out of umask
handling. That should really only be the two mentioned above. It's
not that we want any filesystems to do this. Ideally we have all
umask handling always in the vfs.
- Make overlayfs use SB_I_NOUMASK too.
- Now that we have SB_I_NOUMASK, stop checking for SB_POSIXACL in
IS_POSIXACL() if the kernel doesn't have support for it. This is a
very old patch but it's only possible to do this now with the wider
cleanup that was done.
- Follow-up work on fake path handling from last cycle. Citing mostly
from Amir:
When overlayfs was first merged, overlayfs files of regular files
and directories, the ones that are installed in file table, had a
"fake" path, namely, f_path is the overlayfs path and f_inode is
the "real" inode on the underlying filesystem.
In v6.5, we took another small step by introducing of the
backing_file container and the file_real_path() helper. This change
allowed vfs and filesystem code to get the "real" path of an
overlayfs backing file. With this change, we were able to make
fsnotify work correctly and report events on the "real" filesystem
objects that were accessed via overlayfs.
This method works fine, but it still leaves the vfs vulnerable to
new code that is not aware of files with fake path. A recent
example is commit db1d1e8b98 ("IMA: use vfs_getattr_nosec to get
the i_version"). This commit uses direct referencing to f_path in
IMA code that otherwise uses file_inode() and file_dentry() to
reference the filesystem objects that it is measuring.
This contains work to switch things around: instead of having
filesystem code opt-in to get the "real" path, have generic code
opt-in for the "fake" path in the few places that it is needed.
Is it far more likely that new filesystems code that does not use
the file_dentry() and file_real_path() helpers will end up causing
crashes or averting LSM/audit rules if we keep the "fake" path
exposed by default.
This change already makes file_dentry() moot, but for now we did
not change this helper just added a WARN_ON() in ovl_d_real() to
catch if we have made any wrong assumptions.
After the dust settles on this change, we can make file_dentry() a
plain accessor and we can drop the inode argument to ->d_real().
- Switch struct file to SLAB_TYPESAFE_BY_RCU. This looks like a small
change but it really isn't and I would like to see everyone on
their tippie toes for any possible bugs from this work.
Essentially we've been doing most of what SLAB_TYPESAFE_BY_RCU for
files since a very long time because of the nasty interactions
between the SCM_RIGHTS file descriptor garbage collection. So
extending it makes a lot of sense but it is a subtle change. There
are almost no places that fiddle with file rcu semantics directly
and the ones that did mess around with struct file internal under
rcu have been made to stop doing that because it really was always
dodgy.
I forgot to put in the link tag for this change and the discussion
in the commit so adding it into the merge message:
https://lore.kernel.org/r/20230926162228.68666-1-mjguzik@gmail.com
Cleanups:
- Various smaller pipe cleanups including the removal of a spin lock
that was only used to protect against writes without pipe_lock()
from O_NOTIFICATION_PIPE aka watch queues. As that was never
implemented remove the additional locking from pipe_write().
- Annotate struct watch_filter with the new __counted_by attribute.
- Clarify do_unlinkat() cleanup so that it doesn't look like an extra
iput() is done that would cause issues.
- Simplify file cleanup when the file has never been opened.
- Use module helper instead of open-coding it.
- Predict error unlikely for stale retry.
- Use WRITE_ONCE() for mount expiry field instead of just commenting
that one hopes the compiler doesn't get smart.
Fixes:
- Fix readahead on block devices.
- Fix writeback when layztime is enabled and inodes whose timestamp
is the only thing that changed reside on wb->b_dirty_time. This
caused excessively large zombie memory cgroup when lazytime was
enabled as such inodes weren't handled fast enough.
- Convert BUG_ON() to WARN_ON_ONCE() in open_last_lookups()"
* tag 'vfs-6.7.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
file, i915: fix file reference for mmap_singleton()
vfs: Convert BUG_ON to WARN_ON_ONCE in open_last_lookups
writeback, cgroup: switch inodes with dirty timestamps to release dying cgwbs
chardev: Simplify usage of try_module_get()
ovl: rely on SB_I_NOUMASK
fs: fix umask on NFS with CONFIG_FS_POSIX_ACL=n
fs: store real path instead of fake path in backing file f_path
fs: create helper file_user_path() for user displayed mapped file path
fs: get mnt_writers count for an open backing file's real path
vfs: stop counting on gcc not messing with mnt_expiry_mark if not asked
vfs: predict the error in retry_estale as unlikely
backing file: free directly
vfs: fix readahead(2) on block devices
io_uring: use files_lookup_fd_locked()
file: convert to SLAB_TYPESAFE_BY_RCU
vfs: shave work on failed file open
fs: simplify misleading code to remove ambiguity regarding ihold()/iput()
watch_queue: Annotate struct watch_filter with __counted_by
fs/pipe: use spinlock in pipe_read() only if there is a watch_queue
fs/pipe: remove unnecessary spinlock from pipe_write()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppJgAKCRCRxhvAZXjc
omYoAQD+g3BxYbxEdEuhrnbaZMljp2GEYn+L6I2txdvmp/TpSQEAsQipcEgMC1WI
uc9IDiakYWWCSaN8F7BGR7zKsK5feAc=
=V+jp
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.autofs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull autofs mount api updates from Christian Brauner:
"This ports autofs to the new mount api. The patchset has existed for
quite a while but never made it upstream. Ian picked it back up.
This also fixes a bug where fs_param_is_fd() was passed a garbage
param->dirfd but it expected it to be set to the fd that was used to
set param->file otherwise result->uint_32 contains nonsense. So make
sure it's set.
One less filesystem using the old mount api. We're getting there,
albeit rather slow. The last remaining major filesystem that hasn't
converted is btrfs. Patches exist - I even wrote them - but so far
they haven't made it upstream"
* tag 'vfs-6.7.autofs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
autofs: fix add autofs_parse_fd()
fsconfig: ensure that dirfd is set to aux
autofs: fix protocol sub version setting
autofs: convert autofs to use the new mount api
autofs: validate protocol version
autofs: refactor parse_options()
autofs: reformat 0pt enum declaration
autofs: refactor super block info init
autofs: add autofs_parse_fd()
autofs: refactor autofs_prepare_pipe()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZT0C2gAKCRCRxhvAZXjc
otV8AQCK5F9ONoQ7ISpdrKyUJiswySGXx0CYPfXbSg5gHH87zgEAua3vwVKeGXXF
5iVsdiNzIIQDwGDx7FyxufL4ggcN6gQ=
=E1kV
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.super' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs superblock updates from Christian Brauner:
"This contains the work to make block device opening functions return a
struct bdev_handle instead of just a struct block_device. The same
struct bdev_handle is then also passed to block device closing
functions.
This allows us to propagate context from opening to closing a block
device without having to modify all users everytime.
Sidenote, in the future we might even want to try and have block
device opening functions return a struct file directly but that's a
series on top of this.
These are further preparatory changes to be able to count writable
opens and blocking writes to mounted block devices. That's a separate
piece of work for next cycle and for that we absolutely need the
changes to btrfs that have been quietly dropped somehow.
Originally the series contained a patch that removed the old
blkdev_*() helpers. But since this would've caused needles churn in
-next for bcachefs we ended up delaying it.
The second piece of work addresses one of the major annoyances about
the work last cycle, namely that we required dropping s_umount
whenever we used the superblock and fs_holder_ops for a block device.
The reason for that requirement had been that in some codepaths
s_umount could've been taken under disk->open_mutex (that's always
been the case, at least theoretically). For example, on surprise block
device removal or media change. And opening and closing block devices
required grabbing disk->open_mutex as well.
So we did the work and went through the block layer and fixed all
those places so that s_umount is never taken under disk->open_mutex.
This means no more brittle games where we yield and reacquire s_umount
during block device opening and closing and no more requirements where
block devices need to be closed. Filesystems don't need to care about
this.
There's a bunch of other follow-up work such as moving block device
freezing and thawing to holder operations which makes it work for all
block devices and not just the main block device just as we did for
surprise removal. But that is for next cycle.
Tested with fstests for all major fses, blktests, LTP"
* tag 'vfs-6.7.super' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (37 commits)
porting: update locking requirements
fs: assert that open_mutex isn't held over holder ops
block: assert that we're not holding open_mutex over blk_report_disk_dead
block: move bdev_mark_dead out of disk_check_media_change
block: WARN_ON_ONCE() when we remove active partitions
block: simplify bdev_del_partition()
fs: Avoid grabbing sb->s_umount under bdev->bd_holder_lock
jfs: fix log->bdev_handle null ptr deref in lbmStartIO
bcache: Fixup error handling in register_cache()
xfs: Convert to bdev_open_by_path()
reiserfs: Convert to bdev_open_by_dev/path()
ocfs2: Convert to use bdev_open_by_dev()
nfs/blocklayout: Convert to use bdev_open_by_dev/path()
jfs: Convert to bdev_open_by_dev()
f2fs: Convert to bdev_open_by_dev/path()
ext4: Convert to bdev_open_by_dev()
erofs: Convert to use bdev_open_by_path()
btrfs: Convert to bdev_open_by_path()
fs: Convert to bdev_open_by_dev()
mm/swap: Convert to use bdev_open_by_dev()
...
- Fix a possible CPU hotplug deadlock bug caused by the new
TSC synchronization code.
- Fix a legacy PIC discovery bug that results in device troubles on
affected systems, such as non-working keybards, etc.
- Add a new Intel CPU model number to <asm/intel-family.h>.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=k19e
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix a possible CPU hotplug deadlock bug caused by the new TSC
synchronization code
- Fix a legacy PIC discovery bug that results in device troubles on
affected systems, such as non-working keybards, etc
- Add a new Intel CPU model number to <asm/intel-family.h>
* tag 'x86-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Defer marking TSC unstable to a worker
x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
x86/cpu: Add model number for Intel Arrow Lake mobile processor
- tracing/kprobes: Fix kernel-doc warnings for the variable length
arguments.
- tracing/kprobes: Fix to count the symbols in modules even if the
module name is not specified so that user can probe the symbols in
the modules without module name.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmU82MUbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bMZ0H+wZHWVUsmqGLGNCt3gfi
m2EJX83VMwY8PzpwZ5ezrx4ibAcUyo7Dhh8OniGgEazC3BNeggoUu/HwpirS22gI
Tx0EMlgLOJQykauiUe6FPem0IbrlbQMI1gLplx6cVd8lgIYZQfMIM5gI0kuCywT3
Ka9sCgp6y3UKQNtHKFwtPRLYFTF3Afyy2C01wdsa800SEqeOAeTD9+8yz7ZnuFt+
bNgu6vJGFfJHkEkvYCwFFqZ1eIfXON6lUFpijNpCGvMN2h1XArLexSk8JRBf6j2+
8+1FrRQsTXRk3G6v9uQABeK7z5W2F8gufmSFyBlXajbZp2HT6j4s2S86u5lP9P9J
l1U=
=etyx
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- tracing/kprobes: Fix kernel-doc warnings for the variable length
arguments
- tracing/kprobes: Fix to count the symbols in modules even if the
module name is not specified so that user can probe the symbols in
the modules without module name
* tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix symbol counting logic by looking at modules as well
tracing/kprobes: Fix the description of variable length arguments
- reduce the initialy dynamic swiotlb size to remove an annoying but
harmless warning from the page allocator (Petr Tesarik)
-----BEGIN PGP SIGNATURE-----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=8Jfz
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.6-2023-10-28' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- reduce the initialy dynamic swiotlb size to remove an annoying but
harmless warning from the page allocator (Petr Tesarik)
* tag 'dma-mapping-6.6-2023-10-28' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: do not try to allocate a TLB bigger than MAX_ORDER pages
Here are some very small driver fixes for 6.6-final that have shown up
in the past 2 weeks. Included in here are:
- tiny fastrpc bugfixes for reported errors
- nvmem register fixes
- iio driver fixes for some reported problems
- fpga test fix
- MAINTAINERS file update for fpga
All of these have been in linux-next this week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZTy13A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykHzACdHeaGvszwWwcjHX0SmZBRNbHoj80AnRaM0RP0
SpAvYj7k79XtxOH0KTe0
=y5Zi
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some very small driver fixes for 6.6-final that have shown up
in the past two weeks. Included in here are:
- tiny fastrpc bugfixes for reported errors
- nvmem register fixes
- iio driver fixes for some reported problems
- fpga test fix
- MAINTAINERS file update for fpga
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
fpga: Fix memory leak for fpga_region_test_class_find()
fpga: m10bmc-sec: Change contact for secure update driver
fpga: disable KUnit test suites when module support is enabled
iio: afe: rescale: Accept only offset channels
nvmem: imx: correct nregs for i.MX6ULL
nvmem: imx: correct nregs for i.MX6UL
nvmem: imx: correct nregs for i.MX6SLL
misc: fastrpc: Unmap only if buffer is unmapped from DSP
misc: fastrpc: Clean buffers on remote invocation failures
misc: fastrpc: Free DMA handles for RPC calls with no arguments
misc: fastrpc: Reset metadata buffer to avoid incorrect free
iio: exynos-adc: request second interupt only when touchscreen mode is used
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
dt-bindings: iio: add missing reset-gpios constrain
Plus, fixing an of node leak pattern in the mux subsystem.
-----BEGIN PGP SIGNATURE-----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=bIWp
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Bugfixes for Axxia when it is a target and for PEC handling of
stm32f7.
Plus, fix an OF node leak pattern in the mux subsystem"
* tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: Fix PEC handling in case of SMBUS transfers
i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
i2c: aspeed: Fix i2c bus hang in slave read
With recent block level changes we should never be in a situation where
we hold disk->open_mutex when calling into these helpers. So assert that
in the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-6-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
blk_report_disk_dead() has the following major callers:
(1) del_gendisk()
(2) blk_mark_disk_dead()
Since del_gendisk() acquires disk->open_mutex it's clear that all
callers are assumed to be called without disk->open_mutex held.
In turn, blk_report_disk_dead() is called without disk->open_mutex held
in del_gendisk().
All callers of blk_mark_disk_dead() call it without disk->open_mutex as
well.
Ensure that it is clear that blk_report_disk_dead() is called without
disk->open_mutex on purpose by asserting it and a comment in the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-5-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
disk_check_media_change is mostly called from ->open where it makes
little sense to mark the file system on the device as dead, as we
are just opening it. So instead of calling bdev_mark_dead from
disk_check_media_change move it into the few callers that are not
in an open instance. This avoid calling into bdev_mark_dead and
thus taking s_umount with open_mutex held.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-4-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The logic for disk->open_partitions is:
blkdev_get_by_*()
-> bdev_is_partition()
-> blkdev_get_part()
-> blkdev_get_whole() // bdev_whole->bd_openers++
-> if (part->bd_openers == 0)
disk->open_partitions++
part->bd_openers
In other words, when we first claim/open a partition we increment
disk->open_partitions and only when all part->bd_openers are closed will
disk->open_partitions be zero. That should mean that
disk->open_partitions is always > 0 as long as there's anyone that
has an open partition.
So the check for disk->open_partitions should mean that we can never
remove an active partition that has a holder and holder ops set. Assert
that in the code. The main disk isn't removed so that check doesn't work
for disk->part0 which is what we want. After all we only care about
partition not about the main disk.
Link: https://lore.kernel.org/r/20231017184823.1383356-3-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
BLKPG_DEL_PARTITION refuses to delete partitions that still have
openers, i.e., that has an elevated @bdev->bd_openers count. If a device
is claimed by setting @bdev->bd_holder and @bdev->bd_holder_ops
@bdev->bd_openers and @bdev->bd_holders are incremented.
@bdev->bd_openers is effectively guaranteed to be >= @bdev->bd_holders.
So as long as @bdev->bd_openers isn't zero we know that this partition
is still in active use and that there might still be @bdev->bd_holder
and @bdev->bd_holder_ops set.
The only current example is @fs_holder_ops for filesystems. But that
means bdev_mark_dead() which calls into
bdev->bd_holder_ops->mark_dead::fs_bdev_mark_dead() is a nop. As long as
there's an elevated @bdev->bd_openers count we can't delete the
partition and if there isn't an elevated @bdev->bd_openers count then
there's no @bdev->bd_holder or @bdev->bd_holder_ops.
So simply open-code what we need to do. This gets rid of one more
instance where we acquire s_umount under @disk->open_mutex.
Link: https://lore.kernel.org/r/20231016-fototermin-umriss-59f1ea6c1fe6@brauner
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-2-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The implementation of bdev holder operations such as fs_bdev_mark_dead()
and fs_bdev_sync() grab sb->s_umount semaphore under
bdev->bd_holder_lock. This is problematic because it leads to
disk->open_mutex -> sb->s_umount lock ordering which is counterintuitive
(usually we grab higher level (e.g. filesystem) locks first and lower
level (e.g. block layer) locks later) and indeed makes lockdep complain
about possible locking cycles whenever we open a block device while
holding sb->s_umount semaphore. Implement a function
bdev_super_lock_shared() which safely transitions from holding
bdev->bd_holder_lock to holding sb->s_umount on alive superblock without
introducing the problematic lock dependency. We use this function
fs_bdev_sync() and fs_bdev_mark_dead().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231018152924.3858-1-jack@suse.cz
Link: https://lore.kernel.org/r/20231017184823.1383356-1-hch@lst.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Coverity has noticed that the printing of error message in
register_cache() uses already freed bdev_handle to get to bdev. In fact
the problem has been there even before commit "bcache: Convert to
bdev_open_by_path()" just a bit more subtle one - cache object itself
could have been freed by the time we looked at ca->bdev and we don't
hold any reference to bdev either so even that could in principle go
away (due to device unplug or similar). Fix all these problems by
printing the error message before closing the bdev.
Fixes: dc893f51d24a ("bcache: Convert to bdev_open_by_path()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231004093757.11560-1-jack@suse.cz
Asked-by: Coly Li <colyli@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert xfs to use bdev_open_by_path() and pass the handle around.
CC: "Darrick J. Wong" <djwong@kernel.org>
CC: linux-xfs@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-28-jack@suse.cz
Acked-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert ocfs2 heartbeat code to use bdev_open_by_dev() and pass the
handle around.
CC: Joseph Qi <joseph.qi@linux.alibaba.com>
CC: ocfs2-devel@oss.oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-26-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert block device handling to use bdev_open_by_dev/path() and pass
the handle around.
CC: linux-nfs@vger.kernel.org
CC: Trond Myklebust <trond.myklebust@hammerspace.com>
CC: Anna Schumaker <anna@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-25-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert jfs to use bdev_open_by_dev() and pass the handle around.
CC: Dave Kleikamp <shaggy@kernel.org>
CC: jfs-discussion@lists.sourceforge.net
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-24-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert f2fs to use bdev_open_by_dev/path() and pass the handle around.
CC: Jaegeuk Kim <jaegeuk@kernel.org>
CC: Chao Yu <chao@kernel.org>
CC: linux-f2fs-devel@lists.sourceforge.net
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-23-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert ext4 to use bdev_open_by_dev() and pass the handle around.
CC: linux-ext4@vger.kernel.org
CC: Ted Tso <tytso@mit.edu>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-22-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert erofs to use bdev_open_by_path() and pass the handle around.
CC: Gao Xiang <xiang@kernel.org>
CC: Chao Yu <chao@kernel.org>
CC: linux-erofs@lists.ozlabs.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-21-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert btrfs to use bdev_open_by_path() and pass the handle around. We
also drop the holder from struct btrfs_device as it is now not needed
anymore.
CC: David Sterba <dsterba@suse.com>
CC: linux-btrfs@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-20-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert mount code to use bdev_open_by_dev() and propagate the handle
around to bdev_release().
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-19-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert swapping code to use bdev_open_by_dev() and pass the handle
around.
CC: linux-mm@kvack.org
CC: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-18-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
snapshot_test argument is now unused in swsusp_close() and
load_image_and_restore(). Drop it
CC: linux-pm@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-17-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
