These are mostly minor bugfixes, cleanup and many defconfig updates to
support added drivers. In particular OMAP and PXA keep cleaning up the
legacy code base, as usual.
Nvidia adds some more SoC support code for Tegra 186.
For the first time on years, we are actually adding a non-DT platform for,
the EP93xx based Liebherr controller BK3.1. It's a minor variation of
the EP93xx reference design and in active use, while EP93xx apparently
doesn't have enough new development to have any device tree support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=frm4
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"These are mostly minor bugfixes, cleanup and many defconfig updates to
support added drivers. In particular OMAP and PXA keep cleaning up the
legacy code base, as usual.
Nvidia adds some more SoC support code for Tegra 186.
For the first time on years, we are actually adding a non-DT platform
for the EP93xx based Liebherr controller BK3.1. It's a minor variation
of the EP93xx reference design and in active use, while EP93xx
apparently doesn't have enough new development to have any device tree
support"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
ARM: omap: hwmod: fix section mismatch warnings
ARM: pxa/tosa-bt: add MODULE_LICENSE tag
arm64: defconfig: enable CONFIG_ACPI_APEI_EINJ
arm64: defconfig: enable EDAC GHES option
arm64: defconfig: enable CONFIG_ACPI_APEI_MEMORY_FAILURE
ARM: imx_v6_v7_defconfig: enable CONFIG_CPU_FREQ_STAT
Wind down ARM/TANGO port
ARM: davinci: constify gpio_led
ARM: davinci: drop unneeded newline
soc: Add SoC driver for Gemini
ARM: SAMSUNG: Add SPDX license identifiers
ARM: S5PV210: Add SPDX license identifiers
ARM: S3C64XX: Add SPDX license identifiers
ARM: S3C24XX: Add SPDX license identifiers
ARM: EXYNOS: Add SPDX license identifiers
ARM: imx: remove unused imx3 pm definitions
ARM: imx: don't abort MMDC probe if power saving status doesn't match
ARM: imx_v6_v7_defconfig: enable RTC_DRV_MXC_V2
ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM
ARM: davinci: Use PTR_ERR_OR_ZERO()
...
Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with reworks
to try to attempt to make the code easier to handle in the long run, but
no functional change. There's also some tree-wide sysfs attribute
fixups with lots of acks from the various subsystem maintainers, as well
as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLvPw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynNzACgkzjPoBytJWbpWFt6SR6L33/u4kEAnRFvVCGL
s6ygQPQhZIjKk2Lxa2hC
=Zihy
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with
reworks to try to attempt to make the code easier to handle in the
long run, but no functional change. There's also some tree-wide sysfs
attribute fixups with lots of acks from the various subsystem
maintainers, as well as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits)
device property: Define type of PROPERTY_ENRTY_*() macros
device property: Reuse property_entry_free_data()
device property: Move property_entry_free_data() upper
firmware: Fix up docs referring to FIRMWARE_IN_KERNEL
firmware: Drop FIRMWARE_IN_KERNEL Kconfig option
USB: serial: keyspan: Drop firmware Kconfig options
sysfs: remove DEBUG defines
sysfs: use SPDX identifiers
drivers: base: add coredump driver ops
sysfs: add attribute specification for /sysfs/devices/.../coredump
test_firmware: fix missing unlock on error in config_num_requests_store()
test_firmware: make local symbol test_fw_config static
sysfs: turn WARN() into pr_warn()
firmware: Fix a typo in fallback-mechanisms.rst
treewide: Use DEVICE_ATTR_WO
treewide: Use DEVICE_ATTR_RO
treewide: Use DEVICE_ATTR_RW
sysfs.h: Use octal permissions
component: add debugfs support
bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate
...
Pull irq updates from Thomas Gleixner:
"A rather small set of irq updates this time:
- removal of the old and now obsolete irq domain debugging code
- the new Goldfish PIC driver
- the usual pile of small fixes and updates"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdomain: Kill CONFIG_IRQ_DOMAIN_DEBUG
irq/work: Improve the flag definitions
irqchip/gic-v3: Fix the driver probe() fail due to disabled GICC entry
irqchip/irq-goldfish-pic: Add Goldfish PIC driver
dt-bindings/goldfish-pic: Add device tree binding for Goldfish PIC driver
irqchip/ompic: fix return value check in ompic_of_init()
dt-bindings/bcm283x: Define polarity of per-cpu interrupts
irqchip/irq-bcm2836: Add support for DT interrupt polarity
dt-bindings/bcm2836-l1-intc: Add interrupt polarity support
Core changes:
* Rework core functions to avoid duplicating generic checks in
NAND/OneNAND sub-layers
* Update the MAINTAINERS entry to reflect the fact that MTD
maintainers now use a single git tree
Driver changes:
* CFI: use macros instead of inline functions to limit stack
usage and make KASAN happy
NAND changes:
Core changes:
* Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks
* Introduce the ->exec_op() infrastructure
* Rework NAND buffers handling
* Fix ECC requirements for K9F4G08U0D
* Fix nand_do_read_oob() to return the number of bitflips
* Mark K9F1G08U0E as not supporting subpage writes
Driver changes:
* MTK: Rework the driver to support new IP versions
* OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and fix
DT support
* Marvell: Add a new driver to replace the pxa3xx one
SPI NOR changes:
Core changes:
* Add support to new ISSI and Cypress/Spansion memory parts.
* Fix support of Micron memories by checking error bits in the FSR.
* Fix update of block-protection bits by reading back the SR.
* Restore the internal state of the SPI flash memory when removing the
device.
Driver changes:
* Maintenance for Freescale, Intel and Metiatek drivers.
* Add support of the direct access mode for the Cadence QSPI controller.
-----BEGIN PGP SIGNATURE-----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=Mxo2
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-4.16' of git://git.infradead.org/linux-mtd
Pull MTD updates from Boris Brezillon:
"MTD core changes:
- Rework core functions to avoid duplicating generic checks in
NAND/OneNAND sub-layers
- Update the MAINTAINERS entry to reflect the fact that MTD
maintainers now use a single git tree
MTD driver changes:
- CFI: use macros instead of inline functions to limit stack usage
and make KASAN happy
NAND core changes:
- Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks
- Introduce the ->exec_op() infrastructure
- Rework NAND buffers handling
- Fix ECC requirements for K9F4G08U0D
- Fix nand_do_read_oob() to return the number of bitflips
- Mark K9F1G08U0E as not supporting subpage writes
NAND driver changes:
- MTK: Rework the driver to support new IP versions
- OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and
fix DT support
- Marvell: Add a new driver to replace the pxa3xx one
SPI NOR core changes:
- Add support to new ISSI and Cypress/Spansion memory parts.
- Fix support of Micron memories by checking error bits in the FSR.
- Fix update of block-protection bits by reading back the SR.
- Restore the internal state of the SPI flash memory when removing
the device.
SPI NOR driver changes:
- Maintenance for Freescale, Intel and Metiatek drivers.
- Add support of the direct access mode for the Cadence QSPI
controller"
* tag 'mtd/for-4.16' of git://git.infradead.org/linux-mtd: (93 commits)
mtd: nand: sunxi: Fix ECC strength choice
mtd: nand: gpmi: Fix subpage reads
mtd: nand: Fix build issues due to an anonymous union
mtd: nand: marvell: Fix missing memory allocation modifier
mtd: nand: marvell: remove redundant variable 'oob_len'
mtd: nand: marvell: fix spelling mistake: "suceed"-> "succeed"
mtd: onenand: omap2: Remove redundant dev_err call in omap2_onenand_probe()
mtd: Remove duplicate checks on mtd_oob_ops parameter
mtd: Fallback to ->_read/write_oob() when ->_read/write() is missing
mtd: mtdpart: Make ECC stat handling consistent
mtd: onenand: omap2: print resource using %pR format string
mtd: mtk-nor: modify functions' name more generally
mtd: onenand: samsung: remove incorrect __iomem annotation
MAINTAINERS: Add entry for Marvell NAND controller driver
ARM: OMAP2+: Remove gpmc-onenand
mtd: onenand: omap2: Configure driver from DT
mtd: onenand: omap2: Decouple DMA enabling from INT pin availability
mtd: onenand: omap2: Do not make delay for GPIO OMAP3 specific
mtd: onenand: omap2: Convert to use dmaengine for memcpy
mtd: onenand: omap2: Unify OMAP2 and OMAP3 DMA implementation
...
It doesn't actually do anything. Merge its help text into
EXTRA_FIRMWARE.
Fixes: 5620a0d1aa ("firmware: delete in-kernel firmware")
Fixes: 0946b2fb38 ("firmware: cleanup FIRMWARE_IN_KERNEL message")
Signed-off-by: Benjamin Gilbert <benjamin.gilbert@coreos.com>
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_IRQ_DOMAIN_DEBUG is similar to CONFIG_GENERIC_IRQ_DEBUGFS,
just with less information.
Spring cleanup time.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yang Shunyong <shunyong.yang@hxt-semitech.com>
Link: https://lkml.kernel.org/r/20180117142647.23622-1-marc.zyngier@arm.com
The DRM driver most notably, but also out of tree drivers (for now) like
the VPU or GPU drivers, are quite big consumers of large, contiguous memory
buffers. However, the sunxi_defconfig doesn't enable CMA in order to
mitigate that, which makes them almost unusable.
Enable it to make sure it somewhat works.
Cc: <stable@vger.kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Choose to compile and embed marvell_nand.c as NAND controller driver
instead of the legacy pxa3xx_nand.c for platforms with Marvell EBU
SoCs.
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
- Enable CPU_FREQ_STAT for cpufreq transtion statistics support.
- Enable SRTC driver RTC_DRV_MXC_V2 for i.MX53.
- Turn on a few drivers useful for DART-MX6 SoM support, SERDEV
bluetooth, SERIAL_DEV_BUS, WL18XX, and DEFAULT_ON LED Trigger.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaUDsIAAoJEFBXWFqHsHzORfIH/RQf/Kg7HHFd78qk7TVIbfIK
uH/YspvDReV5cDdiJIoTQiAZTC6MvdlGtG/PevrQHA6F7jjJdRNhwS6VT1pCaidg
pS52OSWIUqFrYdTPuBCyF/tS7lPsiKm74YZzePBUKBz9EEhsTs9bAcL4J6WGkPAN
GcIxe0PG7/SzFQFJMomND4Of2Idru4HP5OHlJFY2K68rVgpdn7DA3+cA2ChB8Ajm
vR9JJO58DwPpNtXf1KiyMur+srKsSn1bvJdu7qvYReNYPHxc6semKo82KgznmNfu
tSfPcDpKOyvYtSEa02TSV5Y1MTtmgTSFcrwh3/SzGZ7qurbkQtS4Cc1YGo5q47A=
=5J9f
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
i.MX defconfig updates for 4.16:
- Enable CPU_FREQ_STAT for cpufreq transtion statistics support.
- Enable SRTC driver RTC_DRV_MXC_V2 for i.MX53.
- Turn on a few drivers useful for DART-MX6 SoM support, SERDEV
bluetooth, SERIAL_DEV_BUS, WL18XX, and DEFAULT_ON LED Trigger.
* tag 'imx-defconfig-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: enable CONFIG_CPU_FREQ_STAT
ARM: imx_v6_v7_defconfig: enable RTC_DRV_MXC_V2
ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM
Signed-off-by: Olof Johansson <olof@lixom.net>
It is very useful for user to retrieve cpufreq transtion statistics
and worth to be default enabled.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
data structures, removal of unnecessary newlines from gpio labels and code
simplification.
Also a defconfig update for DaVinci, enabling support for USB network adaptors.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oZrM
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.16/soc-v2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc
Pull "TI DaVinci SoC support updates for v4.16" from Sekhar Nori:
DaVinci SoC updates consisting of non-critical bug fixes including constifying
data structures, removal of unnecessary newlines from gpio labels and code
simplification.
Also a defconfig update for DaVinci, enabling support for USB network adaptors.
* tag 'davinci-for-v4.16/soc-v2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: constify gpio_led
ARM: davinci: drop unneeded newline
ARM: davinci: Use PTR_ERR_OR_ZERO()
ARM: davinci: make davinci_soc_info structures const
ARM: davinci: make argument to davinci_common_init() as const
ARM: davinci_all_defconfig: enable support for USB network adaptors
These are to configure dra7 PCIe for omap2plus_defconfig and
multi_v7_defconfig.
-----BEGIN PGP SIGNATURE-----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=jl6W
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.16/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Two defconfig updates for omaps
These are to configure dra7 PCIe for omap2plus_defconfig and
multi_v7_defconfig.
* tag 'omap-for-v4.16/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: multi_v7_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)
ARM: omap2plus_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)
Signed-off-by: Olof Johansson <olof@lixom.net>
shmobile_defconfig:
* Enable PWM timers, which are present on R-Car and RZ/G1 platforms,
as a built-in
* Enable SGTL5000 audio codec, which is present on the he iWave RZ/G1M Q7
carrier board, as a built-in
multi_v7_defconfig:
* Enable PWM timers, which are present on R-Car and RZ/G1 platforms,
as a module
-----BEGIN PGP SIGNATURE-----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=7Fzq
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Renesas ARM Based SoC Defconfig Updates for v4.16
shmobile_defconfig:
* Enable PWM timers, which are present on R-Car and RZ/G1 platforms,
as a built-in
* Enable SGTL5000 audio codec, which is present on the he iWave RZ/G1M Q7
carrier board, as a built-in
multi_v7_defconfig:
* Enable PWM timers, which are present on R-Car and RZ/G1 platforms,
as a module
* tag 'renesas-defconfig-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: defconfig: Enable PWM
ARM: multi_v7_defconfig: Select PWM_RCAR as module
ARM: shmobile: defconfig: Enable SGTL5000 audio codec
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds the missing configs for the DART-MX6 SoM support :
- SERDEV bluetooth driver + SERIAL_DEV_BUS configs
- WL18XX driver
- DEFAULT_ON Led Trigger
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch adds framebuffer console support to qcom defconfig.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
MSM IOMMU is required for apq8064 display, so enable it by default.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This enables DRM Kconfig for apq8064 display.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
based crypto and droid 4 USB PHY.
-----BEGIN PGP SIGNATURE-----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=gD3r
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.15/defconfig-v2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "One old minor pull request pending" from Tony Lindgren:
Few omap2plus_defconfig changes for v4.15 merge window to enable NEON
based crypto and droid 4 USB PHY.
* tag 'omap-for-v4.15/defconfig-v2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable droid 4 USB PHY
ARM: omap2plus_defconfig: enable NEON based crypto
Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe
controller present in dra7 SoCs in both host mode and device mode.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe
controller present in dra7 SoCs in both host mode and device mode.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
RZ/G1 and R-Car platforms have PWM timers. This patch enables PWM support
by default.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable PWM support for R-Car and friends by default.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The iWave RZ/G1M Q7 carrier board supports I2S audio codec "SGTL5000".
To increase hardware support enable the driver in the shmobile_defconfig
multiplatform configuration.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
EXYNOS_IOMMU is disabled in exynos_defconfig since it was known to cause
boot failures on Exynos Chromebooks. The recommendation was for IOMMU to
be enabled manually on systems as needed.
A recent exynos_drm change added a warning message when EXYNOS_IOMMU is
disabled. It is necessary to enable it to avoid the warning messages.
A few initial tests have shown that enabling EXYNOS_IOMMU might be safe
on Exynos Chrome-books.
Due to some other changes in the order of operations during boot
process, power domains are initialized very early and because of the
temporary lack of devices (which are not yet added to the system), are
turned off.
This practically stops FIMD for scanning framebuffer very early during
boot, before IOMMU gets initialized and "solves" the issue, which was
the reason to disable Exynos IOMMU by default on Exynos Snow Chromebooks.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
[krzk: Extend message with Marek Szyprowski's explanation]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable drivers for QSPI, LEDS, gpio-decoder that are present on 66AK2G EVM
and 66AK2G ICE boards.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Enable following drivers for recently merged devices:
- CEC and S5P CEC driver for all Exynos4 and Exynos5 boards with HDMI
- Sii9234 DRM HDMI-MHL bridge for Trats2
- dedicated Odroid ASoC machine driver for Odroid XU3/XU4
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable following drivers for recently merged devices:
- perf events and ARM PMU (Performance Measurement Unit) driver for all
Exynos boards
- CEC and S5P CEC driver for all Exynos4 and Exynos5 boards with HDMI
- Sii9234 DRM HDMI-MHL bridge for Trats2
- dedicated Odroid ASoC machine driver for Odroid XU3/XU4
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enables CONFIG_USB_USBNET so that well known USB network adapters
can enumerate as network interfaces.
Signed-off-by: Aparna Balasubramanian <aparnab@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Most of the commits are for defconfig changes, to enable newly added
drivers or features that people have started using. For the changed
lines lines, we have mostly cleanups, the affected platforms are
OMAP, Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions.
The largest single change is the introduction of the TI "sysc" bus
driver, with the intention of cleaning up more legacy code.
Two new SoC platforms get added this time:
- Allwinner R40 is a modernized version of the A20 chip, now
with a Quad-Core ARM Cortex-A7. According to the manufacturer,
it is intended for "Smart Hardware"
- Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family
of chips meant for managed gigabit ethernet switches, based
around a Cortex-A9 CPU.
Finally, we gain SMP support for two platforms: Renesas R-Car E2
and Amlogic Meson8/8b, which were previously added but only supported
uniprocessor operation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jlJ2
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"Most of the commits are for defconfig changes, to enable newly added
drivers or features that people have started using. For the changed
lines lines, we have mostly cleanups, the affected platforms are OMAP,
Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions.
The largest single change is the introduction of the TI "sysc" bus
driver, with the intention of cleaning up more legacy code.
Two new SoC platforms get added this time:
- Allwinner R40 is a modernized version of the A20 chip, now with a
Quad-Core ARM Cortex-A7. According to the manufacturer, it is
intended for "Smart Hardware"
- Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of
chips meant for managed gigabit ethernet switches, based around a
Cortex-A9 CPU.
Finally, we gain SMP support for two platforms: Renesas R-Car E2 and
Amlogic Meson8/8b, which were previously added but only supported
uniprocessor operation"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits)
ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module
ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER
arm64: defconfig: enable CONFIG_GPIO_UNIPHIER
ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b
ARM: meson: Add SMP bringup code for Meson8 and Meson8b
ARM: smp_scu: allow the platform code to read the SCU CPU status
ARM: smp_scu: add a helper for powering on a specific CPU
dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation
ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init()
ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init()
ARM: defconfig: select the right SX150X driver
arm64: defconfig: Enable QCOM_IOMMU
arm64: Add ThunderX drivers to defconfig
arm64: defconfig: Enable Tegra PCI controller
cpufreq: imx6q: Move speed grading check to cpufreq driver
arm64: defconfig: re-enable Qualcomm DB410c USB
ARM: configs: stm32: Add MDMA support in STM32 defconfig
ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1
bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove
bus: ti-sysc: mark PM functions as __maybe_unused
...
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
The RPMSG_VIRTIO is now user selectable option so we explicitly
select it in multi_v7_defconfig. Till now RPMSG_VIRTIO was
selected by ST_REMOTEPROC=m in multi_v7_defconfig.
Signed-off-by: Anup Patel <anup@brainfault.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A new driver has been developed to support the CESA IP. Switch
remaining users of the old driver to the new driver in order to remove
the old one.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Turn on DRM_DW_HDMI_CEC option to get HDMI CEC support.
- Enable MUX_MMIO to get ADV7180 probe on Gateworks GW51xx boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZ7y5xAAoJEFBXWFqHsHzOnuIH/0ftbQ5pKFdWZ4y/UiR5JpYA
hYz2RlgS4m3DbrC8xC8b6MGRBeLr7clSxXlnXfpyASZVmfYhDNaoMFdKtTJpSYxe
rnvhi1ePhb2oq4orjPFzM212eFoIhKEzvwdNyMyLlHM9xqoBGLkcHDJ/6pt96car
JkCoFtQgpy4i0FAV+HNtuE//n0hQAWzXJ7E8Nc00pkwuzWA1HQC1GyAOzsSaIGyR
dQxCxiL9AZGVD8awUnFb39Hme1FIZaP+taz+JFFuTLNE+c/0xQDUi4BTpJxiyWKK
rQrZ1ZUHMOJZ7h55G46paahSqVwN/bxq8nTXoPnaVPHQc+pFOS9X5aUzZKczOJU=
=8Xwg
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
Pull "i.MX defconfig updates for 4.15" from Shawn Guo:
- Turn on DRM_DW_HDMI_CEC option to get HDMI CEC support.
- Enable MUX_MMIO to get ADV7180 probe on Gateworks GW51xx boards.
* tag 'imx-defconfig-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select the CEC driver
ARM: imx_v6_v7_defconfig: Select CONFIG_MUX_MMIO
Let's enable this as loadable module for droid 4.
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The SX150X GPIO expander has been moved to pin control and
its Kconfig symbol has been renamed. We used to have a paper-over
thing in Kconfig but it was causing circular dependencies so
I have had to kill it off. Select the right driver instead.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Enable Sony Z2 tablet options
* Enable USB on APQ8064/MSM8974
* Fixup/catchup config to support newer options
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=90WE
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc
Pull "Qualcomm ARM Based defconfig Updates for v4.15" from Andy Gross:
* Enable Sony Z2 tablet options
* Enable USB on APQ8064/MSM8974
* Fixup/catchup config to support newer options
* tag 'qcom-defconfig-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: qcom_defconfig: Enable Z2 Tablet related options
ARM: qcom_defconfig: Disable DEBUG_GPIO
ARM: qcom_defconfig: Enable configs for USB on apq8064/msm8974
ARM: qcom_defconfig: Resync with new Kconfig options
1. Enable USB3503 on multi_v7 for Odroid U3.
2. Enable USB Attached SCSI for Odroid HC1.
-----BEGIN PGP SIGNATURE-----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=+nLs
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc
Pull "Samsung defconfig changes for v4.15" from Krzysztof Kozłowski:
1. Enable USB3503 on multi_v7 for Odroid U3.
2. Enable USB Attached SCSI for Odroid HC1.
* tag 'samsung-defconfig-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Enable UAS support for Odroid HC1 board
ARM: exynos_defconfig: Enable UAS support for Odroid HC1 board
ARM: multi_v7_defconfig: Enable USB3503 driver
Enable BQ32000 RTC driver in multi_v7_defconfig.
Biju Das says, "The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000).
To increase hardware support enable the driver in the
multi_v7_defconfig multiplatform configuration."
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9Ep1
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Pull "Renesas ARM Based SoC Defconfig Updates for v4.15" from Simon Horman:
Enable BQ32000 RTC driver in multi_v7_defconfig.
Biju Das says, "The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000).
To increase hardware support enable the driver in the
multi_v7_defconfig multiplatform configuration."
* tag 'renesas-defconfig-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: Enable BQ32000 RTC driver
