These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240430085654.1028864-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Class-based I2C probing requires detect() and address_list to be
set in the I2C client driver, see checks in i2c_detect().
It's misleading to declare I2C_CLASS_HWMON support if this
precondition isn't met.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/75747c6a-d414-4b07-8f66-5a5cdddc3c36@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The INA237 "85-V, 16-Bit, Precision Power Monitor With I2C Interface" is
basically the same as INA328. Therefore add a corresponding compatible
to the driver.
According to the datasheet the main difference is the current and power
monitoring accuracy:
+------------------------+---------------+---------------+
| | INA238 | INA237 |
+------------------------+---------------+---------------+
| Offset voltage | +/- 5µV | +/- 50µV |
| Offset drift | +/- 0.02µV/°C | +/- 0.02µV/°C |
| Gain error | +/- 0.1% | +/- 0.3% |
| Gain error drift | +/- 25ppm/°C | +/- 50ppm/°C |
| Common mode rejection | 140dB | 120dB |
| Power accuracy | 0.7% | 1.6% |
+------------------------+---------------+---------------+
As well as the missing DEVICE_ID register at 0x3F, which is currently
not in use by the driver.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Link: https://lore.kernel.org/r/20231026-ina237-v2-1-dec44811a3c9@linux.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230505131718.1210071-1-u.kleine-koenig@pengutronix.de
[groeck: Added missing change in pmbus/acbel-fsg032.c]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Statically allocated array of pointed to hwmon_channel_info can be made
const for safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The INA238 is a I2C power monitor similar to other INA2xx devices,
providing shunt voltage, bus voltage, current, power and temperature
measurements.
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Link: https://lore.kernel.org/r/20211102052754.817220-3-nathan@nathanrossi.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
