mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-13 22:14:20 +08:00
c6833e1000
3580 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Huang Ying
|
c6833e1000 |
memory tiering: rate limit NUMA migration throughput
In NUMA balancing memory tiering mode, if there are hot pages in slow memory node and cold pages in fast memory node, we need to promote/demote hot/cold pages between the fast and cold memory nodes. A choice is to promote/demote as fast as possible. But the CPU cycles and memory bandwidth consumed by the high promoting/demoting throughput will hurt the latency of some workload because of accessing inflating and slow memory bandwidth contention. A way to resolve this issue is to restrict the max promoting/demoting throughput. It will take longer to finish the promoting/demoting. But the workload latency will be better. This is implemented in this patch as the page promotion rate limit mechanism. The number of the candidate pages to be promoted to the fast memory node via NUMA balancing is counted, if the count exceeds the limit specified by the users, the NUMA balancing promotion will be stopped until the next second. A new sysctl knob kernel.numa_balancing_promote_rate_limit_MBps is added for the users to specify the limit. Link: https://lkml.kernel.org/r/20220713083954.34196-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: osalvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wei Xu <weixugc@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Huang Ying
|
33024536ba |
memory tiering: hot page selection with hint page fault latency
Patch series "memory tiering: hot page selection", v4.
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory nodes need to be identified.
Essentially, the original NUMA balancing implementation selects the mostly
recently accessed (MRU) pages to promote. But this isn't a perfect
algorithm to identify the hot pages. Because the pages with quite low
access frequency may be accessed eventually given the NUMA balancing page
table scanning period could be quite long (e.g. 60 seconds). So in this
patchset, we implement a new hot page identification algorithm based on
the latency between NUMA balancing page table scanning and hint page
fault. Which is a kind of mostly frequently accessed (MFU) algorithm.
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patchset
as the page promotion rate limit mechanism.
The promotion hot threshold is workload and system configuration
dependent. So in this patchset, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit.
We used the pmbench memory accessing benchmark tested the patchset on a
2-socket server system with DRAM and PMEM installed. The test results are
as follows,
pmbench score promote rate
(accesses/s) MB/s
------------- ------------
base 146887704.1 725.6
hot selection 165695601.2 544.0
rate limit 162814569.8 165.2
auto adjustment 170495294.0 136.9
From the results above,
With hot page selection patch [1/3], the pmbench score increases about
12.8%, and promote rate (overhead) decreases about 25.0%, compared with
base kernel.
With rate limit patch [2/3], pmbench score decreases about 1.7%, and
promote rate decreases about 69.6%, compared with hot page selection
patch.
With threshold auto adjustment patch [3/3], pmbench score increases about
4.7%, and promote rate decrease about 17.1%, compared with rate limit
patch.
Baolin helped to test the patchset with MySQL on a machine which contains
1 DRAM node (30G) and 1 PMEM node (126G).
sysbench /usr/share/sysbench/oltp_read_write.lua \
......
--tables=200 \
--table-size=1000000 \
--report-interval=10 \
--threads=16 \
--time=120
The tps can be improved about 5%.
This patch (of 3):
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory node need to be identified. Essentially,
the original NUMA balancing implementation selects the mostly recently
accessed (MRU) pages to promote. But this isn't a perfect algorithm to
identify the hot pages. Because the pages with quite low access frequency
may be accessed eventually given the NUMA balancing page table scanning
period could be quite long (e.g. 60 seconds). The most frequently
accessed (MFU) algorithm is better.
So, in this patch we implemented a better hot page selection algorithm.
Which is based on NUMA balancing page table scanning and hint page fault
as follows,
- When the page tables of the processes are scanned to change PTE/PMD
to be PROT_NONE, the current time is recorded in struct page as scan
time.
- When the page is accessed, hint page fault will occur. The scan
time is gotten from the struct page. And The hint page fault
latency is defined as
hint page fault time - scan time
The shorter the hint page fault latency of a page is, the higher the
probability of their access frequency to be higher. So the hint page
fault latency is a better estimation of the page hot/cold.
It's hard to find some extra space in struct page to hold the scan time.
Fortunately, we can reuse some bits used by the original NUMA balancing.
NUMA balancing uses some bits in struct page to store the page accessing
CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the
multi-stage node selection algorithm to avoid to migrate pages shared
accessed by the NUMA nodes back and forth. But for pages in the slow
memory node, even if they are shared accessed by multiple NUMA nodes, as
long as the pages are hot, they need to be promoted to the fast memory
node. So the accessing CPU and PID information are unnecessary for the
slow memory pages. We can reuse these bits in struct page to record the
scan time. For the fast memory pages, these bits are used as before.
For the hot threshold, the default value is 1 second, which works well in
our performance test. All pages with hint page fault latency < hot
threshold will be considered hot.
It's hard for users to determine the hot threshold. So we don't provide a
kernel ABI to set it, just provide a debugfs interface for advanced users
to experiment. We will continue to work on a hot threshold automatic
adjustment mechanism.
The downside of the above method is that the response time to the workload
hot spot changing may be much longer. For example,
- A previous cold memory area becomes hot
- The hint page fault will be triggered. But the hint page fault
latency isn't shorter than the hot threshold. So the pages will
not be promoted.
- When the memory area is scanned again, maybe after a scan period,
the hint page fault latency measured will be shorter than the hot
threshold and the pages will be promoted.
To mitigate this, if there are enough free space in the fast memory node,
the hot threshold will not be used, all pages will be promoted upon the
hint page fault for fast response.
Thanks Zhong Jiang reported and tested the fix for a bug when disabling
memory tiering mode dynamically.
Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: osalvador <osalvador@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Mikulas Patocka
|
8238b45798 |
wait_on_bit: add an acquire memory barrier
There are several places in the kernel where wait_on_bit is not followed by a memory barrier (for example, in drivers/md/dm-bufio.c:new_read). On architectures with weak memory ordering, it may happen that memory accesses that follow wait_on_bit are reordered before wait_on_bit and they may return invalid data. Fix this class of bugs by introducing a new function "test_bit_acquire" that works like test_bit, but has acquire memory ordering semantics. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Hao Jia
|
76b079ef4c |
sched/psi: Remove unused parameter nbytes of psi_trigger_create()
psi_trigger_create()'s 'nbytes' parameter is not used, so we can remove it. Signed-off-by: Hao Jia <jiahao.os@bytedance.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Hao Jia
|
2b97cf7628 |
sched/psi: Zero the memory of struct psi_group
After commit |
||
Linus Torvalds
|
cac03ac368 |
Various fixes: a deadline scheduler fix, a migration fix, a Sparse fix and a comment fix.
Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmLuvmwRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1gONQ/+KkkPTeKgGDvrahTfeYZlmRyvcI1R78r9 yooa8v+DtifznBW2eXDBc8WTruzqr78VyUY+1YSjfKS6FRQWYMficJ3qk3hxgBru 998KZbvl3jXBBlRkqgGeFlF5Ty2KaryEZgX97a7IF/0xWDgpm972jFkJ/KCo/YTY WSQrzutz2FKe71EjK4cAplYxPZIiy/zo2hSGTbsso4M7bO5VLc1Y4qMtFGcCZ7JB s9JYkj2Rfz+AS5wioDRcGuec4A4SrroxKszZA6QDDBuhMJukqexO02xs/fxZ2W4Z DF4U5MFOrtz9AWSGsf1P6XXbgJO8qTgQXZchFsEcJwypV13w8U0IViXQfD/Pvx2X y+WHdnZVIO2sDwOJ15ew7IuoJZ2LsVygrBNFJJaIFOtIz3RzprI0BJN7LeWFALOa IPmbtiY8hVwhKmjRgMHWDwJhMEHLuhGx3idiD89w1pknzTUnKDiwLyEUtyynxeGd ft9uCvPefrYQVx9AiH7wf0W+fg334FCccC+0f8LyduyftUyQCfZIZY6LUSKuKded Odm7k0ngLDPbdZwAHs0Nf/ilRwd91Z7b6hGt5U3ptx+8BPMKB+/k1VoKog7OISPc zGaP7DrtuC4sEdX4X6bqX+mEQhpkLcQw15gVGxhKoHqygWNSZrV634aSSXwfVXJx eT5m/K9a7L0= =CYl5 -----END PGP SIGNATURE----- Merge tag 'sched-urgent-2022-08-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Various fixes: a deadline scheduler fix, a migration fix, a Sparse fix and a comment fix" * tag 'sched-urgent-2022-08-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Do not requeue task on CPU excluded from cpus_mask sched/rt: Fix Sparse warnings due to undefined rt.c declarations exit: Fix typo in comment: s/sub-theads/sub-threads sched, cpuset: Fix dl_cpu_busy() panic due to empty cs->cpus_allowed |
||
Mel Gorman
|
751d4cbc43 |
sched/core: Do not requeue task on CPU excluded from cpus_mask
The following warning was triggered on a large machine early in boot on
a distribution kernel but the same problem should also affect mainline.
WARNING: CPU: 439 PID: 10 at ../kernel/workqueue.c:2231 process_one_work+0x4d/0x440
Call Trace:
<TASK>
rescuer_thread+0x1f6/0x360
kthread+0x156/0x180
ret_from_fork+0x22/0x30
</TASK>
Commit
|
||
|
Linus Torvalds
|
b6bb70f9ab |
Several core optimizations:
* threadgroup_rwsem write locking is skipped when configuring controllers in
empty subtrees. Combined with CLONE_INTO_CGROUP, this allows the common
static usage pattern to not grab threadgroup_rwsem at all (glibc still
doesn't seem ready for CLONE_INTO_CGROUP unfortunately).
* threadgroup_rwsem used to be put into non-percpu mode by default due to
latency concerns in specific use cases. There's no reason for everyone
else to pay for it. Make the behavior optional.
* psi no longer allocates memory when disabled.
along with some code cleanups.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCYugHIQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGd+oAP9lfD3fTRdNo4qWV2VsZsYzoOxzNIuJSwN/dnYx
IEbQOwD/cd2YMfeo6zcb427U/VfTFqjJjFK04OeljYtJU8fFywo=
=sucy
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Several core optimizations:
- threadgroup_rwsem write locking is skipped when configuring
controllers in empty subtrees.
Combined with CLONE_INTO_CGROUP, this allows the common static
usage pattern to not grab threadgroup_rwsem at all (glibc still
doesn't seem ready for CLONE_INTO_CGROUP unfortunately).
- threadgroup_rwsem used to be put into non-percpu mode by default
due to latency concerns in specific use cases. There's no reason
for everyone else to pay for it. Make the behavior optional.
- psi no longer allocates memory when disabled.
... along with some code cleanups"
* tag 'cgroup-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Skip subtree root in cgroup_update_dfl_csses()
cgroup: remove "no" prefixed mount options
cgroup: Make !percpu threadgroup_rwsem operations optional
cgroup: Add "no" prefixed mount options
cgroup: Elide write-locking threadgroup_rwsem when updating csses on an empty subtree
cgroup.c: remove redundant check for mixable cgroup in cgroup_migrate_vet_dst
cgroup.c: add helper __cset_cgroup_from_root to cleanup duplicated codes
psi: dont alloc memory for psi by default
|
||
Ben Dooks
|
87514b2c24 |
sched/rt: Fix Sparse warnings due to undefined rt.c declarations
There are several symbols defined in kernel/sched/sched.h but get wrapped in CONFIG_CGROUP_SCHED, even though dummy versions get built in rt.c and therefore trigger Sparse warnings: kernel/sched/rt.c:309:6: warning: symbol 'unregister_rt_sched_group' was not declared. Should it be static? kernel/sched/rt.c:311:6: warning: symbol 'free_rt_sched_group' was not declared. Should it be static? kernel/sched/rt.c:313:5: warning: symbol 'alloc_rt_sched_group' was not declared. Should it be static? Fix this by moving them outside the CONFIG_CGROUP_SCHED block. [ mingo: Refreshed to the latest scheduler tree, tweaked changelog. ] Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20220721145155.358366-1-ben-linux@fluff.org |
||
Waiman Long
|
b6e8d40d43 |
sched, cpuset: Fix dl_cpu_busy() panic due to empty cs->cpus_allowed
With cgroup v2, the cpuset's cpus_allowed mask can be empty indicating
that the cpuset will just use the effective CPUs of its parent. So
cpuset_can_attach() can call task_can_attach() with an empty mask.
This can lead to cpumask_any_and() returns nr_cpu_ids causing the call
to dl_bw_of() to crash due to percpu value access of an out of bound
CPU value. For example:
[80468.182258] BUG: unable to handle page fault for address: ffffffff8b6648b0
:
[80468.191019] RIP: 0010:dl_cpu_busy+0x30/0x2b0
:
[80468.207946] Call Trace:
[80468.208947] cpuset_can_attach+0xa0/0x140
[80468.209953] cgroup_migrate_execute+0x8c/0x490
[80468.210931] cgroup_update_dfl_csses+0x254/0x270
[80468.211898] cgroup_subtree_control_write+0x322/0x400
[80468.212854] kernfs_fop_write_iter+0x11c/0x1b0
[80468.213777] new_sync_write+0x11f/0x1b0
[80468.214689] vfs_write+0x1eb/0x280
[80468.215592] ksys_write+0x5f/0xe0
[80468.216463] do_syscall_64+0x5c/0x80
[80468.224287] entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix that by using effective_cpus instead. For cgroup v1, effective_cpus
is the same as cpus_allowed. For v2, effective_cpus is the real cpumask
to be used by tasks within the cpuset anyway.
Also update task_can_attach()'s 2nd argument name to cs_effective_cpus to
reflect the change. In addition, a check is added to task_can_attach()
to guard against the possibility that cpumask_any_and() may return a
value >= nr_cpu_ids.
Fixes:
|
||
|
Linus Torvalds
|
7d9d077c78 |
RCU pull request for v5.20 (or whatever)
This pull request contains the following branches: doc.2022.06.21a: Documentation updates. fixes.2022.07.19a: Miscellaneous fixes. nocb.2022.07.19a: Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms. poll.2022.07.21a: Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods. rcu-tasks.2022.06.21a: Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead. torture.2022.06.21a: Torture-test updates. ctxt.2022.07.05a: Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmLgMcgTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jArXD/0fjbCwqpRjHVTzjMY8jN4zDkqZZD6m g8Fx27hZ4ToNFwRptyHwNezrNj14skjAJEXfdjaVw32W62ivXvf0HINvSzsTLCSq k2kWyBdXLc9CwY5p5W4smnpn5VoAScjg5PoPL59INoZ/Zziji323C7Zepl/1DYJt 0T6bPCQjo1ZQoDUCyVpSjDmAqxnderWG0MeJVt74GkLqmnYLANg0GH8c7mH4+9LL kVGlLp5nlPgNJ4FEoFdMwNU8T/ETmaVld/m2dkiawjkXjJzB2XKtBigU91DDmXz5 7DIdV4ABrxiy4kGNqtIe/jFgnKyVD7xiDpyfjd6KTeDr/rDS8u2ZH7+1iHsyz3g0 Np/tS3vcd0KR+gI/d0eXxPbgm5sKlCmKw/nU2eArpW/+4LmVXBUfHTG9Jg+LJmBc JrUh6aEdIZJZHgv/nOQBNig7GJW43IG50rjuJxAuzcxiZNEG5lUSS23ysaA9CPCL PxRWKSxIEfK3kdmvVO5IIbKTQmIBGWlcWMTcYictFSVfBgcCXpPAksGvqA5JiUkc egW+xLFo/7K+E158vSKsVqlWZcEeUbsNJ88QOlpqnRgH++I2Yv/LhK41XfJfpH+Y ALxVaDd+mAq6v+qSHNVq9wT3ozXIPy/zK1hDlMIqx40h2YvaEsH4je+521oSoN9r vX60+QNxvUBLwA== =vUNm -----END PGP SIGNATURE----- Merge tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes - Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms - Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods - Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead - Torture-test updates - Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y * tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits) rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings rcu: Diagnose extended sync_rcu_do_polled_gp() loops rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings rcutorture: Test polled expedited grace-period primitives rcu: Add polled expedited grace-period primitives rcutorture: Verify that polled GP API sees synchronous grace periods rcu: Make Tiny RCU grace periods visible to polled APIs rcu: Make polled grace-period API account for expedited grace periods rcu: Switch polled grace-period APIs to ->gp_seq_polled rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty rcu/nocb: Add option to opt rcuo kthreads out of RT priority rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread() rcu/nocb: Add an option to offload all CPUs on boot rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order rcu/nocb: Add/del rdp to iterate from rcuog itself rcu/tree: Add comment to describe GP-done condition in fqs loop rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs() rcu/kvfree: Remove useless monitor_todo flag rcu: Cleanup RCU urgency state for offline CPU ... |
||
|
Linus Torvalds
|
b349b1181d |
for-5.20/io_uring-2022-07-29
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmLkm5gQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpmKMD/4l3QIrLbjYIxlfrzQcHbmYuUkbQtj3SbZg 6ejbnGVhCs1P9DdXH8MgE2BxgpiXQE0CqOK7vbSoo5ep2n2UTLI2DIxAl74SMIo7 0wmJXtUJySuViKr3NYVHqlN180MkQYddBz0nGElhkQBPBCMhW8CrtPCeURr/YyHp 2RxSYBXiUx2gRyig+klnp6oPEqelcBZJUyNHdA9yVrgl/RhB/t2rKj7D++8ukQM3 Zuyh8WIkTeTfUz9hdGG7fuCEdZN4DlO2CCEc7uy0cKi6VRCKH4hYUCqClJ+/cfd2 43dUI2O7B6D1t/ObFh8AGIDXBDqVA6ePQohQU6gooRkfQiBPKkc9d0ts4yIhRqca AjkzNM+0Eve3A01loJ8J84w8oZnvNpYEv5n8/sZVLWcyU3UIs0I88nC2OBiFtoRq d77CtFLwOTo+r3STtAhnZOqez90rhS6BqKtqlUP346PCuFItl6/MbGtwdTbLYEFj CVNIb2pERWSr2NxGv4lFyXaX/cRwruxojWH7yc3rRYjr4Ykevd1pe/fMGNiMAnKw 5em/3QU3qq0ZVcXLMihksKeHHFIQwGDRMuyuv/fktV10+yYXQ0t16WzkJT3aR8Xo cqs0r8+6Jnj3uYcOMzj/FoLcpEPr21hnwAtzLto1mG1Wh4JRn/D7Nx5zqxPLxcW+ NiU6VihPOw== =gxeV -----END PGP SIGNATURE----- Merge tag 'for-5.20/io_uring-2022-07-29' of git://git.kernel.dk/linux-block Pull io_uring updates from Jens Axboe: - As per (valid) complaint in the last merge window, fs/io_uring.c has grown quite large these days. io_uring isn't really tied to fs either, as it supports a wide variety of functionality outside of that. Move the code to io_uring/ and split it into files that either implement a specific request type, and split some code into helpers as well. The code is organized a lot better like this, and io_uring.c is now < 4K LOC (me). - Deprecate the epoll_ctl opcode. It'll still work, just trigger a warning once if used. If we don't get any complaints on this, and I don't expect any, then we can fully remove it in a future release (me). - Improve the cancel hash locking (Hao) - kbuf cleanups (Hao) - Efficiency improvements to the task_work handling (Dylan, Pavel) - Provided buffer improvements (Dylan) - Add support for recv/recvmsg multishot support. This is similar to the accept (or poll) support for have for multishot, where a single SQE can trigger everytime data is received. For applications that expect to do more than a few receives on an instantiated socket, this greatly improves efficiency (Dylan). - Efficiency improvements for poll handling (Pavel) - Poll cancelation improvements (Pavel) - Allow specifiying a range for direct descriptor allocations (Pavel) - Cleanup the cqe32 handling (Pavel) - Move io_uring types to greatly cleanup the tracing (Pavel) - Tons of great code cleanups and improvements (Pavel) - Add a way to do sync cancelations rather than through the sqe -> cqe interface, as that's a lot easier to use for some use cases (me). - Add support to IORING_OP_MSG_RING for sending direct descriptors to a different ring. This avoids the usually problematic SCM case, as we disallow those. (me) - Make the per-command alloc cache we use for apoll generic, place limits on it, and use it for netmsg as well (me). - Various cleanups (me, Michal, Gustavo, Uros) * tag 'for-5.20/io_uring-2022-07-29' of git://git.kernel.dk/linux-block: (172 commits) io_uring: ensure REQ_F_ISREG is set async offload net: fix compat pointer in get_compat_msghdr() io_uring: Don't require reinitable percpu_ref io_uring: fix types in io_recvmsg_multishot_overflow io_uring: Use atomic_long_try_cmpxchg in __io_account_mem io_uring: support multishot in recvmsg net: copy from user before calling __get_compat_msghdr net: copy from user before calling __copy_msghdr io_uring: support 0 length iov in buffer select in compat io_uring: fix multishot ending when not polled io_uring: add netmsg cache io_uring: impose max limit on apoll cache io_uring: add abstraction around apoll cache io_uring: move apoll cache to poll.c io_uring: consolidate hash_locked io-wq handling io_uring: clear REQ_F_HASH_LOCKED on hash removal io_uring: don't race double poll setting REQ_F_ASYNC_DATA io_uring: don't miss setting REQ_F_DOUBLE_POLL io_uring: disable multishot recvmsg io_uring: only trace one of complete or overflow ... |
||
|
Linus Torvalds
|
b167fdffe9 |
This cycle's scheduler updates for v6.0 are:
Load-balancing improvements:
============================
- Improve NUMA balancing on AMD Zen systems for affine workloads.
- Improve the handling of reduced-capacity CPUs in load-balancing.
- Energy Model improvements: fix & refine all the energy fairness metrics (PELT),
and remove the conservative threshold requiring 6% energy savings to
migrate a task. Doing this improves power efficiency for most workloads,
and also increases the reliability of energy-efficiency scheduling.
- Optimize/tweak select_idle_cpu() to spend (much) less time searching
for an idle CPU on overloaded systems. There's reports of several
milliseconds spent there on large systems with large workloads ...
[ Since the search logic changed, there might be behavioral side effects. ]
- Improve NUMA imbalance behavior. On certain systems
with spare capacity, initial placement of tasks is non-deterministic,
and such an artificial placement imbalance can persist for a long time,
hurting (and sometimes helping) performance.
The fix is to make fork-time task placement consistent with runtime
NUMA balancing placement.
Note that some performance regressions were reported against this,
caused by workloads that are not memory bandwith limited, which benefit
from the artificial locality of the placement bug(s). Mel Gorman's
conclusion, with which we concur, was that consistency is better than
random workload benefits from non-deterministic bugs:
"Given there is no crystal ball and it's a tradeoff, I think it's
better to be consistent and use similar logic at both fork time
and runtime even if it doesn't have universal benefit."
- Improve core scheduling by fixing a bug in sched_core_update_cookie() that
caused unnecessary forced idling.
- Improve wakeup-balancing by allowing same-LLC wakeup of idle CPUs for newly
woken tasks.
- Fix a newidle balancing bug that introduced unnecessary wakeup latencies.
ABI improvements/fixes:
=======================
- Do not check capabilities and do not issue capability check denial messages
when a scheduler syscall doesn't require privileges. (Such as increasing niceness.)
- Add forced-idle accounting to cgroups too.
- Fix/improve the RSEQ ABI to not just silently accept unknown flags.
(No existing tooling is known to have learned to rely on the previous behavior.)
- Depreciate the (unused) RSEQ_CS_FLAG_NO_RESTART_ON_* flags.
Optimizations:
==============
- Optimize & simplify leaf_cfs_rq_list()
- Micro-optimize set_nr_{and_not,if}_polling() via try_cmpxchg().
Misc fixes & cleanups:
======================
- Fix the RSEQ self-tests on RISC-V and Glibc 2.35 systems.
- Fix a full-NOHZ bug that can in some cases result in the tick not being
re-enabled when the last SCHED_RT task is gone from a runqueue but there's
still SCHED_OTHER tasks around.
- Various PREEMPT_RT related fixes.
- Misc cleanups & smaller fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xr2b
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Load-balancing improvements:
- Improve NUMA balancing on AMD Zen systems for affine workloads.
- Improve the handling of reduced-capacity CPUs in load-balancing.
- Energy Model improvements: fix & refine all the energy fairness
metrics (PELT), and remove the conservative threshold requiring 6%
energy savings to migrate a task. Doing this improves power
efficiency for most workloads, and also increases the reliability
of energy-efficiency scheduling.
- Optimize/tweak select_idle_cpu() to spend (much) less time
searching for an idle CPU on overloaded systems. There's reports of
several milliseconds spent there on large systems with large
workloads ...
[ Since the search logic changed, there might be behavioral side
effects. ]
- Improve NUMA imbalance behavior. On certain systems with spare
capacity, initial placement of tasks is non-deterministic, and such
an artificial placement imbalance can persist for a long time,
hurting (and sometimes helping) performance.
The fix is to make fork-time task placement consistent with runtime
NUMA balancing placement.
Note that some performance regressions were reported against this,
caused by workloads that are not memory bandwith limited, which
benefit from the artificial locality of the placement bug(s). Mel
Gorman's conclusion, with which we concur, was that consistency is
better than random workload benefits from non-deterministic bugs:
"Given there is no crystal ball and it's a tradeoff, I think
it's better to be consistent and use similar logic at both fork
time and runtime even if it doesn't have universal benefit."
- Improve core scheduling by fixing a bug in
sched_core_update_cookie() that caused unnecessary forced idling.
- Improve wakeup-balancing by allowing same-LLC wakeup of idle CPUs
for newly woken tasks.
- Fix a newidle balancing bug that introduced unnecessary wakeup
latencies.
ABI improvements/fixes:
- Do not check capabilities and do not issue capability check denial
messages when a scheduler syscall doesn't require privileges. (Such
as increasing niceness.)
- Add forced-idle accounting to cgroups too.
- Fix/improve the RSEQ ABI to not just silently accept unknown flags.
(No existing tooling is known to have learned to rely on the
previous behavior.)
- Depreciate the (unused) RSEQ_CS_FLAG_NO_RESTART_ON_* flags.
Optimizations:
- Optimize & simplify leaf_cfs_rq_list()
- Micro-optimize set_nr_{and_not,if}_polling() via try_cmpxchg().
Misc fixes & cleanups:
- Fix the RSEQ self-tests on RISC-V and Glibc 2.35 systems.
- Fix a full-NOHZ bug that can in some cases result in the tick not
being re-enabled when the last SCHED_RT task is gone from a
runqueue but there's still SCHED_OTHER tasks around.
- Various PREEMPT_RT related fixes.
- Misc cleanups & smaller fixes"
* tag 'sched-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
rseq: Kill process when unknown flags are encountered in ABI structures
rseq: Deprecate RSEQ_CS_FLAG_NO_RESTART_ON_* flags
sched/core: Fix the bug that task won't enqueue into core tree when update cookie
nohz/full, sched/rt: Fix missed tick-reenabling bug in dequeue_task_rt()
sched/core: Always flush pending blk_plug
sched/fair: fix case with reduced capacity CPU
sched/core: Use try_cmpxchg in set_nr_{and_not,if}_polling
sched/core: add forced idle accounting for cgroups
sched/fair: Remove the energy margin in feec()
sched/fair: Remove task_util from effective utilization in feec()
sched/fair: Use the same cpumask per-PD throughout find_energy_efficient_cpu()
sched/fair: Rename select_idle_mask to select_rq_mask
sched, drivers: Remove max param from effective_cpu_util()/sched_cpu_util()
sched/fair: Decay task PELT values during wakeup migration
sched/fair: Provide u64 read for 32-bits arch helper
sched/fair: Introduce SIS_UTIL to search idle CPU based on sum of util_avg
sched: only perform capability check on privileged operation
sched: Remove unused function group_first_cpu()
sched/fair: Remove redundant word " *"
selftests/rseq: check if libc rseq support is registered
...
|
||
Jens Axboe
|
ed29b0b4fd |
io_uring: move to separate directory
In preparation for splitting io_uring up a bit, move it into its own top level directory. It didn't really belong in fs/ anyway, as it's not a file system only API. This adds io_uring/ and moves the core files in there, and updates the MAINTAINERS file for the new location. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Paul E. McKenney
|
34bc7b454d |
Merge branch 'ctxt.2022.07.05a' into HEAD
ctxt.2022.07.05a: Linux-kernel memory model development branch. |
||
Cruz Zhao
|
91caa5ae24 |
sched/core: Fix the bug that task won't enqueue into core tree when update cookie
In function sched_core_update_cookie(), a task will enqueue into the
core tree only when it enqueued before, that is, if an uncookied task
is cookied, it will not enqueue into the core tree until it enqueue
again, which will result in unnecessary force idle.
Here follows the scenario:
CPU x and CPU y are a pair of SMT siblings.
1. Start task a running on CPU x without sleeping, and task b and
task c running on CPU y without sleeping.
2. We create a cookie and share it to task a and task b, and then
we create another cookie and share it to task c.
3. Simpling core_forceidle_sum of task a and b from /proc/PID/sched
And we will find out that core_forceidle_sum of task a takes 30%
time of the sampling period, which shouldn't happen as task a and b
have the same cookie.
Then we migrate task a to CPU x', migrate task b and c to CPU y', where
CPU x' and CPU y' are a pair of SMT siblings, and sampling again, we
will found out that core_forceidle_sum of task a and b are almost zero.
To solve this problem, we enqueue the task into the core tree if it's
on rq.
Fixes: 6e33cad0af49("sched: Trivial core scheduling cookie management")
Signed-off-by: Cruz Zhao <CruzZhao@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1656403045-100840-2-git-send-email-CruzZhao@linux.alibaba.com
|
||
Nicolas Saenz Julienne
|
5c66d1b9b3 |
nohz/full, sched/rt: Fix missed tick-reenabling bug in dequeue_task_rt()
dequeue_task_rt() only decrements 'rt_rq->rt_nr_running' after having
called sched_update_tick_dependency() preventing it from re-enabling the
tick on systems that no longer have pending SCHED_RT tasks but have
multiple runnable SCHED_OTHER tasks:
dequeue_task_rt()
dequeue_rt_entity()
dequeue_rt_stack()
dequeue_top_rt_rq()
sub_nr_running() // decrements rq->nr_running
sched_update_tick_dependency()
sched_can_stop_tick() // checks rq->rt.rt_nr_running,
...
__dequeue_rt_entity()
dec_rt_tasks() // decrements rq->rt.rt_nr_running
...
Every other scheduler class performs the operation in the opposite
order, and sched_update_tick_dependency() expects the values to be
updated as such. So avoid the misbehaviour by inverting the order in
which the above operations are performed in the RT scheduler.
Fixes:
|
||
Juri Lelli
|
ddfc710395 |
sched/deadline: Fix BUG_ON condition for deboosted tasks
Tasks the are being deboosted from SCHED_DEADLINE might enter
enqueue_task_dl() one last time and hit an erroneous BUG_ON condition:
since they are not boosted anymore, the if (is_dl_boosted()) branch is
not taken, but the else if (!dl_prio) is and inside this one we
BUG_ON(!is_dl_boosted), which is of course false (BUG_ON triggered)
otherwise we had entered the if branch above. Long story short, the
current condition doesn't make sense and always leads to triggering of a
BUG.
Fix this by only checking enqueue flags, properly: ENQUEUE_REPLENISH has
to be present, but additional flags are not a problem.
Fixes:
|
||
John Keeping
|
401e4963bf |
sched/core: Always flush pending blk_plug
With CONFIG_PREEMPT_RT, it is possible to hit a deadlock between two
normal priority tasks (SCHED_OTHER, nice level zero):
INFO: task kworker/u8:0:8 blocked for more than 491 seconds.
Not tainted 5.15.49-rt46 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u8:0 state:D stack: 0 pid: 8 ppid: 2 flags:0x00000000
Workqueue: writeback wb_workfn (flush-7:0)
[<c08a3a10>] (__schedule) from [<c08a3d84>] (schedule+0xdc/0x134)
[<c08a3d84>] (schedule) from [<c08a65a0>] (rt_mutex_slowlock_block.constprop.0+0xb8/0x174)
[<c08a65a0>] (rt_mutex_slowlock_block.constprop.0) from [<c08a6708>]
+(rt_mutex_slowlock.constprop.0+0xac/0x174)
[<c08a6708>] (rt_mutex_slowlock.constprop.0) from [<c0374d60>] (fat_write_inode+0x34/0x54)
[<c0374d60>] (fat_write_inode) from [<c0297304>] (__writeback_single_inode+0x354/0x3ec)
[<c0297304>] (__writeback_single_inode) from [<c0297998>] (writeback_sb_inodes+0x250/0x45c)
[<c0297998>] (writeback_sb_inodes) from [<c0297c20>] (__writeback_inodes_wb+0x7c/0xb8)
[<c0297c20>] (__writeback_inodes_wb) from [<c0297f24>] (wb_writeback+0x2c8/0x2e4)
[<c0297f24>] (wb_writeback) from [<c0298c40>] (wb_workfn+0x1a4/0x3e4)
[<c0298c40>] (wb_workfn) from [<c0138ab8>] (process_one_work+0x1fc/0x32c)
[<c0138ab8>] (process_one_work) from [<c0139120>] (worker_thread+0x22c/0x2d8)
[<c0139120>] (worker_thread) from [<c013e6e0>] (kthread+0x16c/0x178)
[<c013e6e0>] (kthread) from [<c01000fc>] (ret_from_fork+0x14/0x38)
Exception stack(0xc10e3fb0 to 0xc10e3ff8)
3fa0: 00000000 00000000 00000000 00000000
3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
INFO: task tar:2083 blocked for more than 491 seconds.
Not tainted 5.15.49-rt46 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:tar state:D stack: 0 pid: 2083 ppid: 2082 flags:0x00000000
[<c08a3a10>] (__schedule) from [<c08a3d84>] (schedule+0xdc/0x134)
[<c08a3d84>] (schedule) from [<c08a41b0>] (io_schedule+0x14/0x24)
[<c08a41b0>] (io_schedule) from [<c08a455c>] (bit_wait_io+0xc/0x30)
[<c08a455c>] (bit_wait_io) from [<c08a441c>] (__wait_on_bit_lock+0x54/0xa8)
[<c08a441c>] (__wait_on_bit_lock) from [<c08a44f4>] (out_of_line_wait_on_bit_lock+0x84/0xb0)
[<c08a44f4>] (out_of_line_wait_on_bit_lock) from [<c0371fb0>] (fat_mirror_bhs+0xa0/0x144)
[<c0371fb0>] (fat_mirror_bhs) from [<c0372a68>] (fat_alloc_clusters+0x138/0x2a4)
[<c0372a68>] (fat_alloc_clusters) from [<c0370b14>] (fat_alloc_new_dir+0x34/0x250)
[<c0370b14>] (fat_alloc_new_dir) from [<c03787c0>] (vfat_mkdir+0x58/0x148)
[<c03787c0>] (vfat_mkdir) from [<c0277b60>] (vfs_mkdir+0x68/0x98)
[<c0277b60>] (vfs_mkdir) from [<c027b484>] (do_mkdirat+0xb0/0xec)
[<c027b484>] (do_mkdirat) from [<c0100060>] (ret_fast_syscall+0x0/0x1c)
Exception stack(0xc2e1bfa8 to 0xc2e1bff0)
bfa0: 01ee42f0 01ee4208 01ee42f0 000041ed 00000000 00004000
bfc0: 01ee42f0 01ee4208 00000000 00000027 01ee4302 00000004 000dcb00 01ee4190
bfe0: 000dc368 bed11924 0006d4b0 b6ebddfc
Here the kworker is waiting on msdos_sb_info::s_lock which is held by
tar which is in turn waiting for a buffer which is locked waiting to be
flushed, but this operation is plugged in the kworker.
The lock is a normal struct mutex, so tsk_is_pi_blocked() will always
return false on !RT and thus the behaviour changes for RT.
It seems that the intent here is to skip blk_flush_plug() in the case
where a non-preemptible lock (such as a spinlock) has been converted to
a rtmutex on RT, which is the case covered by the SM_RTLOCK_WAIT
schedule flag. But sched_submit_work() is only called from schedule()
which is never called in this scenario, so the check can simply be
deleted.
Looking at the history of the -rt patchset, in fact this change was
present from v5.9.1-rt20 until being dropped in v5.13-rt1 as it was part
of a larger patch [1] most of which was replaced by commit
|
||
Vincent Guittot
|
c82a69629c |
sched/fair: fix case with reduced capacity CPU
The capacity of the CPU available for CFS tasks can be reduced because of other activities running on the latter. In such case, it's worth trying to move CFS tasks on a CPU with more available capacity. The rework of the load balance has filtered the case when the CPU is classified to be fully busy but its capacity is reduced. Check if CPU's capacity is reduced while gathering load balance statistic and classify it group_misfit_task instead of group_fully_busy so we can try to move the load on another CPU. Reported-by: David Chen <david.chen@nutanix.com> Reported-by: Zhang Qiao <zhangqiao22@huawei.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: David Chen <david.chen@nutanix.com> Tested-by: Zhang Qiao <zhangqiao22@huawei.com> Link: https://lkml.kernel.org/r/20220708154401.21411-1-vincent.guittot@linaro.org |
||
Frederic Weisbecker
|
e67198cc05 |
context_tracking: Take idle eqs entrypoints over RCU
The RCU dynticks counter is going to be merged into the context tracking subsystem. Start with moving the idle extended quiescent states entrypoints to context tracking. For now those are dumb redirections to existing RCU calls. [ paulmck: Apply kernel test robot feedback. ] Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Uladzislau Rezki <uladzislau.rezki@sony.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com> Cc: Yu Liao <liaoyu15@huawei.com> Cc: Phil Auld <pauld@redhat.com> Cc: Paul Gortmaker<paul.gortmaker@windriver.com> Cc: Alex Belits <abelits@marvell.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> |
||
Uros Bizjak
|
c02d5546ea |
sched/core: Use try_cmpxchg in set_nr_{and_not,if}_polling
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) != old in
set_nr_{and_not,if}_polling. x86 cmpxchg returns success in ZF flag,
so this change saves a compare after cmpxchg.
The definition of cmpxchg based fetch_or was changed in the
same way as atomic_fetch_##op definitions were changed
in
|
||
Josh Don
|
1fcf54deb7 |
sched/core: add forced idle accounting for cgroups
|
||
|
Frederic Weisbecker
|
24a9c54182 |
context_tracking: Split user tracking Kconfig
Context tracking is going to be used not only to track user transitions but also idle/IRQs/NMIs. The user tracking part will then become a separate feature. Prepare Kconfig for that. [ frederic: Apply Max Filippov feedback. ] Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Uladzislau Rezki <uladzislau.rezki@sony.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com> Cc: Yu Liao <liaoyu15@huawei.com> Cc: Phil Auld <pauld@redhat.com> Cc: Paul Gortmaker<paul.gortmaker@windriver.com> Cc: Alex Belits <abelits@marvell.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> |
||
Vincent Donnefort
|
b812fc9768 |
sched/fair: Remove the energy margin in feec()
find_energy_efficient_cpu() integrates a margin to protect tasks from bouncing back and forth from a CPU to another. This margin is set as being 6% of the total current energy estimated on the system. This however does not work for two reasons: 1. The energy estimation is not a good absolute value: compute_energy() used in feec() is a good estimation for task placement as it allows to compare the energy with and without a task. The computed delta will give a good overview of the cost for a certain task placement. It, however, doesn't work as an absolute estimation for the total energy of the system. First it adds the contribution to idle CPUs into the energy, second it mixes util_avg with util_est values. util_avg contains the near history for a CPU usage, it doesn't tell at all what the current utilization is. A system that has been quite busy in the near past will hold a very high energy and then a high margin preventing any task migration to a lower capacity CPU, wasting energy. It even creates a negative feedback loop: by holding the tasks on a less efficient CPU, the margin contributes in keeping the energy high. 2. The margin handicaps small tasks: On a system where the workload is composed mostly of small tasks (which is often the case on Android), the overall energy will be high enough to create a margin none of those tasks can cross. On a Pixel4, a small utilization of 5% on all the CPUs creates a global estimated energy of 140 joules, as per the Energy Model declaration of that same device. This means, after applying the 6% margin that any migration must save more than 8 joules to happen. No task with a utilization lower than 40 would then be able to migrate away from the biggest CPU of the system. The 6% of the overall system energy was brought by the following patch: ( |
||
|
Vincent Donnefort
|
3e8c6c9aac |
sched/fair: Remove task_util from effective utilization in feec()
The energy estimation in find_energy_efficient_cpu() (feec()) relies on
the computation of the effective utilization for each CPU of a perf domain
(PD). This effective utilization is then used as an estimation of the busy
time for this pd. The function effective_cpu_util() which gives this value,
scales the utilization relative to IRQ pressure on the CPU to take into
account that the IRQ time is hidden from the task clock. The IRQ scaling is
as follow:
effective_cpu_util = irq + (cpu_cap - irq)/cpu_cap * util
Where util is the sum of CFS/RT/DL utilization, cpu_cap the capacity of
the CPU and irq the IRQ avg time.
If now we take as an example a task placement which doesn't raise the OPP
on the candidate CPU, we can write the energy delta as:
delta = OPPcost/cpu_cap * (effective_cpu_util(cpu_util + task_util) -
effective_cpu_util(cpu_util))
= OPPcost/cpu_cap * (cpu_cap - irq)/cpu_cap * task_util
We end-up with an energy delta depending on the IRQ avg time, which is a
problem: first the time spent on IRQs by a CPU has no effect on the
additional energy that would be consumed by a task. Second, we don't want
to favour a CPU with a higher IRQ avg time value.
Nonetheless, we need to take the IRQ avg time into account. If a task
placement raises the PD's frequency, it will increase the energy cost for
the entire time where the CPU is busy. A solution is to only use
effective_cpu_util() with the CPU contribution part. The task contribution
is added separately and scaled according to prev_cpu's IRQ time.
No change for the FREQUENCY_UTIL component of the energy estimation. We
still want to get the actual frequency that would be selected after the
task placement.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lkml.kernel.org/r/20220621090414.433602-7-vdonnefort@google.com
|
||
Dietmar Eggemann
|
9b340131a4 |
sched/fair: Use the same cpumask per-PD throughout find_energy_efficient_cpu()
The Perf Domain (PD) cpumask (struct em_perf_domain.cpus) stays invariant after Energy Model creation, i.e. it is not updated after CPU hotplug operations. That's why the PD mask is used in conjunction with the cpu_online_mask (or Sched Domain cpumask). Thereby the cpu_online_mask is fetched multiple times (in compute_energy()) during a run-queue selection for a task. cpu_online_mask may change during this time which can lead to wrong energy calculations. To be able to avoid this, use the select_rq_mask per-cpu cpumask to create a cpumask out of PD cpumask and cpu_online_mask and pass it through the function calls of the EAS run-queue selection path. The PD cpumask for max_spare_cap_cpu/compute_prev_delta selection (find_energy_efficient_cpu()) is now ANDed not only with the SD mask but also with the cpu_online_mask. This is fine since this cpumask has to be in syc with the one used for energy computation (compute_energy()). An exclusive cpuset setup with at least one asymmetric CPU capacity island (hence the additional AND with the SD cpumask) is the obvious exception here. Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lkml.kernel.org/r/20220621090414.433602-6-vdonnefort@google.com |
||
|
Dietmar Eggemann
|
ec4fc801a0 |
sched/fair: Rename select_idle_mask to select_rq_mask
On 21/06/2022 11:04, Vincent Donnefort wrote:
> From: Dietmar Eggemann <dietmar.eggemann@arm.com>
https://lkml.kernel.org/r/202206221253.ZVyGQvPX-lkp@intel.com discovered
that this patch doesn't build anymore (on tip sched/core or linux-next)
because of commit
|
||
|
Dietmar Eggemann
|
bb44799949 |
sched, drivers: Remove max param from effective_cpu_util()/sched_cpu_util()
effective_cpu_util() already has a `int cpu' parameter which allows to retrieve the CPU capacity scale factor (or maximum CPU capacity) inside this function via an arch_scale_cpu_capacity(cpu). A lot of code calling effective_cpu_util() (or the shim sched_cpu_util()) needs the maximum CPU capacity, i.e. it will call arch_scale_cpu_capacity() already. But not having to pass it into effective_cpu_util() will make the EAS wake-up code easier, especially when the maximum CPU capacity reduced by the thermal pressure is passed through the EAS wake-up functions. Due to the asymmetric CPU capacity support of arm/arm64 architectures, arch_scale_cpu_capacity(int cpu) is a per-CPU variable read access via per_cpu(cpu_scale, cpu) on such a system. On all other architectures it is a a compile-time constant (SCHED_CAPACITY_SCALE). Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Vincent Guittot <vincent.guittot@linaro.org> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lkml.kernel.org/r/20220621090414.433602-4-vdonnefort@google.com |
||
|
Vincent Donnefort
|
e2f3e35f1f |
sched/fair: Decay task PELT values during wakeup migration
Before being migrated to a new CPU, a task sees its PELT values synchronized with rq last_update_time. Once done, that same task will also have its sched_avg last_update_time reset. This means the time between the migration and the last clock update will not be accounted for in util_avg and a discontinuity will appear. This issue is amplified by the PELT clock scaling. It takes currently one tick after the CPU being idle to let clock_pelt catching up clock_task. This is especially problematic for asymmetric CPU capacity systems which need stable util_avg signals for task placement and energy estimation. Ideally, this problem would be solved by updating the runqueue clocks before the migration. But that would require taking the runqueue lock which is quite expensive [1]. Instead estimate the missing time and update the task util_avg with that value. To that end, we need sched_clock_cpu() but it is a costly function. Limit the usage to the case where the source CPU is idle as we know this is when the clock is having the biggest risk of being outdated. See comment in migrate_se_pelt_lag() for more details about how the PELT value is estimated. Notice though this estimation doesn't take into account IRQ and Paravirt time. [1] https://lkml.kernel.org/r/20190709115759.10451-1-chris.redpath@arm.com Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com> Signed-off-by: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lkml.kernel.org/r/20220621090414.433602-3-vdonnefort@google.com |
||
|
Vincent Donnefort
|
d05b43059d |
sched/fair: Provide u64 read for 32-bits arch helper
Introducing macro helpers u64_u32_{store,load}() to factorize lockless
accesses to u64 variables for 32-bits architectures.
Users are for now cfs_rq.min_vruntime and sched_avg.last_update_time. To
accommodate the later where the copy lies outside of the structure
(cfs_rq.last_udpate_time_copy instead of sched_avg.last_update_time_copy),
use the _copy() version of those helpers.
Those new helpers encapsulate smp_rmb() and smp_wmb() synchronization and
therefore, have a small penalty for 32-bits machines in set_task_rq_fair()
and init_cfs_rq().
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lkml.kernel.org/r/20220621090414.433602-2-vdonnefort@google.com
|
||
Chen Yu
|
70fb5ccf2e |
sched/fair: Introduce SIS_UTIL to search idle CPU based on sum of util_avg
[Problem Statement] select_idle_cpu() might spend too much time searching for an idle CPU, when the system is overloaded. The following histogram is the time spent in select_idle_cpu(), when running 224 instances of netperf on a system with 112 CPUs per LLC domain: @usecs: [0] 533 | | [1] 5495 | | [2, 4) 12008 | | [4, 8) 239252 | | [8, 16) |
||
Christian Göttsche
|
700a78335f |
sched: only perform capability check on privileged operation
sched_setattr(2) issues via kernel/sched/core.c:__sched_setscheduler()
a CAP_SYS_NICE audit event unconditionally, even when the requested
operation does not require that capability / is unprivileged, i.e. for
reducing niceness.
This is relevant in connection with SELinux, where a capability check
results in a policy decision and by default a denial message on
insufficient permission is issued.
It can lead to three undesired cases:
1. A denial message is generated, even in case the operation was an
unprivileged one and thus the syscall succeeded, creating noise.
2. To avoid the noise from 1. the policy writer adds a rule to ignore
those denial messages, hiding future syscalls, where the task
performs an actual privileged operation, leading to hidden limited
functionality of that task.
3. To avoid the noise from 1. the policy writer adds a rule to allow
the task the capability CAP_SYS_NICE, while it does not need it,
violating the principle of least privilege.
Conduct privilged/unprivileged categorization first and perform a
capable test (and at most once) only if needed.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220615152505.310488-1-cgzones@googlemail.com
|
||
Zhang Qiao
|
c64b551f6a |
sched: Remove unused function group_first_cpu()
As of commit
|
||
|
Zhang Qiao
|
fb95a5a04d |
sched/fair: Remove redundant word " *"
" *" is redundant. so remove it. Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220617181151.29980-2-zhangqiao22@huawei.com |
||
|
Paul E. McKenney
|
e386b67257 |
rcu-tasks: Eliminate RCU Tasks Trace IPIs to online CPUs
Currently, the RCU Tasks Trace grace-period kthread IPIs each online CPU using smp_call_function_single() in order to track any tasks currently in RCU Tasks Trace read-side critical sections during which the corresponding task has neither blocked nor been preempted. These IPIs are annoying and are also not strictly necessary because any task that blocks or is preempted within its current RCU Tasks Trace read-side critical section will be tracked on one of the per-CPU rcu_tasks_percpu structure's ->rtp_blkd_tasks list. So the only time that this is a problem is if one of the CPUs runs through a long-duration RCU Tasks Trace read-side critical section without a context switch. Note that the task_call_func() function cannot help here because there is no safe way to identify the target task. Of course, the task_call_func() function will be very useful later, when processing the list of tasks, but it needs to know the task. This commit therefore creates a cpu_curr_snapshot() function that returns a pointer the task_struct structure of some task that happened to be running on the specified CPU more or less during the time that the cpu_curr_snapshot() function was executing. If there was no context switch during this time, this function will return a pointer to the task_struct structure of the task that was running throughout. If there was a context switch, then the outgoing task will be taken care of by RCU's context-switch hook, and the incoming task was either already taken care during some previous context switch, or it is not currently within an RCU Tasks Trace read-side critical section. And in this latter case, the grace period already started, so there is no need to wait on this task. This new cpu_curr_snapshot() function is invoked on each CPU early in the RCU Tasks Trace grace-period processing, and the resulting tasks are queued for later quiescent-state inspection. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Martin KaFai Lau <kafai@fb.com> Cc: KP Singh <kpsingh@kernel.org> |
||
Tianchen Ding
|
f3dd3f6745 |
sched: Remove the limitation of WF_ON_CPU on wakelist if wakee cpu is idle
Wakelist can help avoid cache bouncing and offload the overhead of waker
cpu. So far, using wakelist within the same llc only happens on
WF_ON_CPU, and this limitation could be removed to further improve
wakeup performance.
The commit
|
||
|
Tianchen Ding
|
28156108fe |
sched: Fix the check of nr_running at queue wakelist
The commit
|
||
|
Josh Don
|
792b9f65a5 |
sched: Allow newidle balancing to bail out of load_balance
While doing newidle load balancing, it is possible for new tasks to arrive, such as with pending wakeups. newidle_balance() already accounts for this by exiting the sched_domain load_balance() iteration if it detects these cases. This is very important for minimizing wakeup latency. However, if we are already in load_balance(), we may stay there for a while before returning back to newidle_balance(). This is most exacerbated if we enter a 'goto redo' loop in the LBF_ALL_PINNED case. A very straightforward workaround to this is to adjust should_we_balance() to bail out if we're doing a CPU_NEWLY_IDLE balance and new tasks are detected. This was tested with the following reproduction: - two threads that take turns sleeping and waking each other up are affined to two cores - a large number of threads with 100% utilization are pinned to all other cores Without this patch, wakeup latency was ~120us for the pair of threads, almost entirely spent in load_balance(). With this patch, wakeup latency is ~6us. Signed-off-by: Josh Don <joshdon@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220609025515.2086253-1-joshdon@google.com |
||
Yajun Deng
|
2ed81e7654 |
sched/deadline: Use proc_douintvec_minmax() limit minimum value
sysctl_sched_dl_period_max and sysctl_sched_dl_period_min are unsigned integer, but proc_dointvec() wouldn't return error even if we set a negative number. Use proc_douintvec_minmax() instead of proc_dointvec(). Add extra1 for sysctl_sched_dl_period_max and extra2 for sysctl_sched_dl_period_min. It's just an optimization for match data and proc_handler in struct ctl_table. The 'if (period < min || period > max)' in __checkparam_dl() will work fine even if there hasn't this patch. Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Bristot de Oliveira <bristot@kernel.org> Link: https://lore.kernel.org/r/20220607101807.249965-1-yajun.deng@linux.dev |
||
Chengming Zhou
|
51bf903b64 |
sched/fair: Optimize and simplify rq leaf_cfs_rq_list
We notice the rq leaf_cfs_rq_list has two problems when do bugfix backports and some test profiling. 1. cfs_rqs under throttled subtree could be added to the list, and make their fully decayed ancestors on the list, even though not needed. 2. #1 also make the leaf_cfs_rq_list management complex and error prone, this is the list of related bugfix so far: commit |
||
K Prateek Nayak
|
f5b2eeb499 |
sched/fair: Consider CPU affinity when allowing NUMA imbalance in find_idlest_group()
In the case of systems containing multiple LLCs per socket, like AMD Zen systems, users want to spread bandwidth hungry applications across multiple LLCs. Stream is one such representative workload where the best performance is obtained by limiting one stream thread per LLC. To ensure this, users are known to pin the tasks to a specify a subset of the CPUs consisting of one CPU per LLC while running such bandwidth hungry tasks. Suppose we kickstart a multi-threaded task like stream with 8 threads using taskset or numactl to run on a subset of CPUs on a 2 socket Zen3 server where each socket contains 128 CPUs (0-63,128-191 in one socket, 64-127,192-255 in another socket) Eg: numactl -C 0,16,32,48,64,80,96,112 ./stream8 Here each CPU in the list is from a different LLC and 4 of those LLCs are on one socket, while the other 4 are on another socket. Ideally we would prefer that each stream thread runs on a different CPU from the allowed list of CPUs. However, the current heuristics in find_idlest_group() do not allow this during the initial placement. Suppose the first socket (0-63,128-191) is our local group from which we are kickstarting the stream tasks. The first four stream threads will be placed in this socket. When it comes to placing the 5th thread, all the allowed CPUs are from the local group (0,16,32,48) would have been taken. However, the current scheduler code simply checks if the number of tasks in the local group is fewer than the allowed numa-imbalance threshold. This threshold was previously 25% of the NUMA domain span (in this case threshold = 32) but after the v6 of Mel's patchset "Adjust NUMA imbalance for multiple LLCs", got merged in sched-tip, Commit: |
||
|
Mel Gorman
|
026b98a93b |
sched/numa: Adjust imb_numa_nr to a better approximation of memory channels
For a single LLC per node, a NUMA imbalance is allowed up until 25% of CPUs sharing a node could be active. One intent of the cut-off is to avoid an imbalance of memory channels but there is no topological information based on active memory channels. Furthermore, there can be differences between nodes depending on the number of populated DIMMs. A cut-off of 25% was arbitrary but generally worked. It does have a severe corner cases though when an parallel workload is using 25% of all available CPUs over-saturates memory channels. This can happen due to the initial forking of tasks that get pulled more to one node after early wakeups (e.g. a barrier synchronisation) that is not quickly corrected by the load balancer. The LB may fail to act quickly as the parallel tasks are considered to be poor migrate candidates due to locality or cache hotness. On a range of modern Intel CPUs, 12.5% appears to be a better cut-off assuming all memory channels are populated and is used as the new cut-off point. A minimum of 1 is specified to allow a communicating pair to remain local even for CPUs with low numbers of cores. For modern AMDs, there are multiple LLCs and are not affected. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20220520103519.1863-5-mgorman@techsingularity.net |
||
|
Mel Gorman
|
cb29a5c19d |
sched/numa: Apply imbalance limitations consistently
The imbalance limitations are applied inconsistently at fork time and at runtime. At fork, a new task can remain local until there are too many running tasks even if the degree of imbalance is larger than NUMA_IMBALANCE_MIN which is different to runtime. Secondly, the imbalance figure used during load balancing is different to the one used at NUMA placement. Load balancing uses the number of tasks that must move to restore imbalance where as NUMA balancing uses the total imbalance. In combination, it is possible for a parallel workload that uses a small number of CPUs without applying scheduler policies to have very variable run-to-run performance. [lkp@intel.com: Fix build breakage for arc-allyesconfig] Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20220520103519.1863-4-mgorman@techsingularity.net |
||
|
Mel Gorman
|
13ede33150 |
sched/numa: Do not swap tasks between nodes when spare capacity is available
If a destination node has spare capacity but there is an imbalance then two tasks are selected for swapping. If the tasks have no numa group or are within the same NUMA group, it's simply shuffling tasks around without having any impact on the compute imbalance. Instead, it's just punishing one task to help another. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20220520103519.1863-3-mgorman@techsingularity.net |
||
|
Mel Gorman
|
70ce3ea9aa |
sched/numa: Initialise numa_migrate_retry
On clone, numa_migrate_retry is inherited from the parent which means that the first NUMA placement of a task is non-deterministic. This affects when load balancing recognises numa tasks and whether to migrate "regular", "remote" or "all" tasks between NUMA scheduler domains. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20220520103519.1863-2-mgorman@techsingularity.net |
||
Peter Zijlstra
|
04193d590b |
sched: Fix balance_push() vs __sched_setscheduler()
The purpose of balance_push() is to act as a filter on task selection
in the case of CPU hotplug, specifically when taking the CPU out.
It does this by (ab)using the balance callback infrastructure, with
the express purpose of keeping all the unlikely/odd cases in a single
place.
In order to serve its purpose, the balance_push_callback needs to be
(exclusively) on the callback list at all times (noting that the
callback always places itself back on the list the moment it runs,
also noting that when the CPU goes down, regular balancing concerns
are moot, so ignoring them is fine).
And here-in lies the problem, __sched_setscheduler()'s use of
splice_balance_callbacks() takes the callbacks off the list across a
lock-break, making it possible for, an interleaving, __schedule() to
see an empty list and not get filtered.
Fixes:
|
||
Chen Wandun
|
5f69a6577b |
psi: dont alloc memory for psi by default
Memory about struct psi_group is allocated by default for each cgroup even if psi_disabled is true, in this case, these allocated memory is waste, so alloc memory for struct psi_group only when psi_disabled is false. Signed-off-by: Chen Wandun <chenwandun@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
Linus Torvalds
|
bc1e02c3e5 |
Fix the fallout of sysctl code move which placed the init function wrong.
-----BEGIN PGP SIGNATURE----- iQJGBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmKcc+ATHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYobuAD/i9gZZ1b1Qtr9vCeioy8hXkP1QltXC5 sBK/l+LH8kWMi2eQtqhr5T8Xhca0K84Ml2gCLimnhX5PZxUJ7VTL9DVhhU0vPbFx 7dKVAF6xU6B0gV92Ojn4ztHXM/qulqbOExESaxOXpIQ8Rh5QUqokVSeTFVzQmxve GykHUGK6DFi3+W1aID4oW5BsGgG1i+5Qn4HuSP35vfvS4e0K056s5ANfJdzt4+Sz q4APbOrB5Dgbg351vRk+ms49TariVrdWOBc4ujPAYJms+oCrDHpTbHtTAKt/n1UF z5AbfFkebSK7hf2nplo1Qr+QZ0vLlWchbc+IdjhPvkXrZwqbgdJKJUznieHyUEOO xUUYKErEAcDNuF6wkhum5hhRARuHpHOdd6qAIFGsexTN7gOIgFF3Mdq2GD4YBebF O86tinGdOD1hzzxzW+r+AIgZgCUILmP0+lRasEZuJMT/iTWAiU1MjrNNPL45ZX1e Ldie5b7rGubwKaCwCv1R//D9NI6OTalVnmCyf1NRIeb9py4bG3SgCQecHP0pZeh5 +xmsO8rrMlkq2fOe9K6N57vWeRcvQzTMGb17wZh/fAWCa2Ny7Si52NFgRwPNExCu YKR2bptFSZmKe0cZ8Q6mdw7J1tCJm+4Htgw9LSgaf/jvmvHyTV261ZZTHeglsdTQ JDGbad9Vt6h1 =arj3 -----END PGP SIGNATURE----- Merge tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "Fix the fallout of sysctl code move which placed the init function wrong" * tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/autogroup: Fix sysctl move |
||
|
Linus Torvalds
|
67850b7bdc |
While looking at the ptrace problems with PREEMPT_RT and the problems
of Peter Zijlstra was encountering with ptrace in his freezer rewrite I identified some cleanups to ptrace_stop that make sense on their own and move make resolving the other problems much simpler. The biggest issue is the habbit of the ptrace code to change task->__state from the tracer to suppress TASK_WAKEKILL from waking up the tracee. No other code in the kernel does that and it is straight forward to update signal_wake_up and friends to make that unnecessary. Peter's task freezer sets frozen tasks to a new state TASK_FROZEN and then it stores them by calling "wake_up_state(t, TASK_FROZEN)" relying on the fact that all stopped states except the special stop states can tolerate spurious wake up and recover their state. The state of stopped and traced tasked is changed to be stored in task->jobctl as well as in task->__state. This makes it possible for the freezer to recover tasks in these special states, as well as serving as a general cleanup. With a little more work in that direction I believe TASK_STOPPED can learn to tolerate spurious wake ups and become an ordinary stop state. The TASK_TRACED state has to remain a special state as the registers for a process are only reliably available when the process is stopped in the scheduler. Fundamentally ptrace needs acess to the saved register values of a task. There are bunch of semi-random ptrace related cleanups that were found while looking at these issues. One cleanup that deserves to be called out is from commit |