When the loader indicates an internal error (result of a checked bpf
system call), it returns the result in attr.test.retval. However, tests
that rely on ASSERT_OK_PTR on NULL (returned from light skeleton) may
miss that NULL denotes an error if errno is set to 0. This would result
in skel pointer being NULL, while ASSERT_OK_PTR returning 1, leading to
a SEGV on dereference of skel, because libbpf_get_error relies on the
assumption that errno is always set in case of error for ptr == NULL.
In particular, this was observed for the ksyms_module test. When
executed using `./test_progs -t ksyms`, prior tests manipulated errno
and the test didn't crash when it failed at ksyms_module load, while
using `./test_progs -t ksyms_module` crashed due to errno being
untouched.
Fixes: 6723474373 (libbpf: Generate loader program out of BPF ELF file.)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210927145941.1383001-11-memxor@gmail.com
Make use of the struct_size() and flex_array_size() helpers instead of
an open-coded version, in order to avoid any potential type mistakes
or integer overflows that, in the worse scenario, could lead to heap
overflows.
Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20210928193107.GA262595@embeddedor
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous patch to ignore STT_SECTION symbols only added the ignore
condition in one of them. This fails if there's more than one map
definition in the 'maps' section, because the subsequent modulus check will
fail, resulting in error messages like:
libbpf: elf: unable to determine legacy map definition size in ./xdpdump_xdp.o
Fix this by also ignoring STT_SECTION in the first loop.
Fixes: c3e8c44a90 ("libbpf: Ignore STT_SECTION symbols in 'maps' section")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210929213837.832449-1-toke@redhat.com
We have a unit test that invokes an XDP program with 1m different
inputs, aka 1m BPF_PROG_RUN syscalls. We run this test concurrently
with slight variations in how we generated the input.
Since commit f23c4b3924 ("bpf: Start using the BPF dispatcher in BPF_TEST_RUN")
the unit test has slowed down significantly. Digging deeper reveals that
the concurrent tests are serialised in the kernel on the XDP dispatcher.
This is a global resource that is protected by a mutex, on which we contend.
Fix this by not calling into the XDP dispatcher if we only want to perform
a single run of the BPF program.
See: https://lore.kernel.org/bpf/CACAyw9_y4QumOW35qpgTbLsJ532uGq-kVW-VESJzGyiZkypnvw@mail.gmail.com/
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210928093100.27124-1-lmb@cloudflare.com
This adds force_prevent_wake which can be used to force a certain state
while interacting with force_suspend.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This adds force_suspend which can be used to force the controller into
suspend/resume state.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cleanup code uses while (cpu++ < cpu_cnt) for closing fds, which means
it starts iterating from 1 for closing fds. If the first fd is -1, it
skips over it and closes garbage fds (typically zero) in the remaining
array. This leads to test failures for future tests when they end up
storing fd 0 (as the slot becomes free due to close(0)) in ldimm64's BTF
fd, ending up trying to match module BTF id with vmlinux.
This was observed as spurious CI failure for the ksym_module_libbpf and
module_attach tests. The test ends up closing fd 0 and breaking libbpf's
assumption that module BTF fd will always be > 0, which leads to the
kernel thinking that we are pointing to a BTF ID in vmlinux BTF.
Fixes: 025bd7c753 (selftests/bpf: Add test for bpf_get_branch_snapshot)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210927145941.1383001-12-memxor@gmail.com
Update Altera Pio Driver maintainer's email from <joyce.ooi@intel.com> to <mun.yew.tham@intel.com>
Signed-off-by: Mun Yew Tham <mun.yew.tham@intel.com>
Acked-by: Joyce Ooi <joyce.ooi@intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Per gpio_chip interface, error shall be proparated to the caller.
Attempt to silent diagnostics by returning zero (as written in the
comment) is plain wrong, because the zero return can be interpreted by
the caller as the gpio value.
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
It became a slightly large collection of changes, partly because
I've been off in the last weeks. Most of changes are small and
scattered while a bit big change is found in HD-audio Realtek
codec driver; it's a very device-specific fix that has been long
wanted, so I decided to pick up although it's in the middle RC.
Some highlights:
* A new guard ioctl for ALSA rawmidi API to avoid the misuse of
the new timestamp framing mode; it's for a regression fix
* HD-audio: a revert of the 5.15 change that might work badly,
new quirks for Lenovo Legion & co, a follow-up fix for CS8409
* ASoC: lots of SOF-related fixes, fsl component fixes, corrections of
mediatek drivers
* USB-audio: fix for the PM resume
* FireWire: oxfw and motu fixes
-----BEGIN PGP SIGNATURE-----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=BWpv
-----END PGP SIGNATURE-----
Merge tag 'sound-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became a slightly large collection of changes, partly because
I've been off in the last weeks. Most of changes are small and
scattered while a bit big change is found in HD-audio Realtek codec
driver; it's a very device-specific fix that has been long wanted, so
I decided to pick up although it's in the middle RC.
Some highlights:
- A new guard ioctl for ALSA rawmidi API to avoid the misuse of the
new timestamp framing mode; it's for a regression fix
- HD-audio: a revert of the 5.15 change that might work badly, new
quirks for Lenovo Legion & co, a follow-up fix for CS8409
- ASoC: lots of SOF-related fixes, fsl component fixes, corrections
of mediatek drivers
- USB-audio: fix for the PM resume
- FireWire: oxfw and motu fixes"
* tag 'sound-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
ALSA: pcsp: Make hrtimer forwarding more robust
ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION
ALSA: firewire-motu: fix truncated bytes in message tracepoints
ASoC: SOF: trace: Omit error print when waking up trace sleepers
ASoC: mediatek: mt8195: remove wrong fixup assignment on HDMITX
ASoC: SOF: loader: Re-phrase the missing firmware error to avoid duplication
ASoC: SOF: loader: release_firmware() on load failure to avoid batching
ALSA: hda/cs8409: Setup Dolphin Headset Mic as Phantom Jack
ALSA: pcxhr: "fix" PCXHR_REG_TO_PORT definition
ASoC: SOF: imx: imx8m: Bar index is only valid for IRAM and SRAM types
ASoC: SOF: imx: imx8: Bar index is only valid for IRAM and SRAM types
ASoC: SOF: Fix DSP oops stack dump output contents
ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops.
ALSA: usb-audio: Unify mixer resume and reset_resume procedure
Revert "ALSA: hda: Drop workaround for a hang at shutdown again"
ALSA: oxfw: fix transmission method for Loud models based on OXFW971
ASoC: mediatek: common: handle NULL case in suspend/resume function
ASoC: fsl_xcvr: register platform component before registering cpu dai
ASoC: fsl_spdif: register platform component before registering cpu dai
ASoC: fsl_micfil: register platform component before registering cpu dai
...
Pull crypto fixes from Herbert Xu:
"This contains fixes for a resource leak in ccp as well as stack
corruption in x86/sm4"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/sm4 - Fix frame pointer stack corruption
crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd()
This moves code from hci_suspend_notifier to hci_{suspend,resume}_dev
since some driver may handle pm directly using
HCI_QUIRK_NO_SUSPEND_NOTIFIER they would instead call
hci_{suspend,resume}_dev directly and we want that to have the same
behavior regardless of where pm is being handled.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Fix a build error with clang in __xp_alloc():
[...]
net/xdp/xsk_buff_pool.c:465:15: error: variable 'xskb' is uninitialized
when used here [-Werror,-Wuninitialized]
xp_release(xskb);
^~~~
This is correctly detected by clang, but not gcc. In fact, the xp_release()
statement should not be there at all in the refactored code, just remove it.
Fixes: 94033cd8e7 ("xsk: Optimize for aligned case")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210929061403.8587-1-magnus.karlsson@gmail.com
Use 2-factor argument form kvcalloc() instead of kvzalloc().
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
datagram.c hasn't use any macro or function declared in linux/ip.h.
Thus, these files can be removed from datagram.c safely without
affecting the compilation of the net/ipv4 module
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
tag_ksz.c hasn't use any macro or function declared in linux/slab.h.
Thus, these files can be removed from tag_ksz.c safely without
affecting the compilation of the ./net/dsa module
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
tag_8021q.c hasn't use any macro or function declared in linux/if_bridge.h.
Thus, these files can be removed from tag_8021q.c safely without
affecting the compilation of the ./net/dsa module
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
When EEE support was added to the 28nm EPHY it was assumed that it would
be able to support the standard clause 45 over clause 22 register access
method. It turns out that the PHY does not support that, which is the
very reason for using the indirect shadow mode 2 bank 3 access method.
Implement {read,write}_mmd to allow the standard PHY library routines
pertaining to EEE querying and configuration to work correctly on these
PHYs. This forces us to implement a __phy_set_clr_bits() function that
does not grab the MDIO bus lock since the PHY driver's {read,write}_mmd
functions are always called with that lock held.
Fixes: 83ee102a69 ("net: phy: bcm7xxx: add support for 28nm EPHY")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use array_size() helper instead of the open-coded version in
copy_to_user(). These sorts of multiplication factors need
to be wrapped in array_size().
Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use array_size() helper instead of the open-coded version in
copy_to_user(). These sorts of multiplication factors need
to be wrapped in array_size().
Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use array_size() helper instead of the open-coded version in
copy_{from,to}_user(). These sorts of multiplication factors
need to be wrapped in array_size().
Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang says:
====================
net: hns3: add some fixes for -net
This series adds some fixes for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the firmware compatible features are enabled in PF driver
initialization process, but they are not disabled in PF driver
deinitialization process and firmware keeps these features in enabled
status.
In this case, if load an old PF driver (for example, in VM) which not
support the firmware compatible features, firmware will still send mailbox
message to PF when link status changed and PF will print
"un-supported mailbox message, code = 201".
To fix this problem, disable these firmware compatible features in PF
driver deinitialization process.
Fixes: ed8fb4b262 ("net: hns3: add link change event report")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the rx vlan filter will always be disabled before selftest and
be enabled after selftest as the rx vlan filter feature is fixed on in
old device earlier than V3.
However, this feature is not fixed in some new devices and it can be
disabled by user. In this case, it is wrong if rx vlan filter is enabled
after selftest. So fix it.
Fixes: bcc26e8dc4 ("net: hns3: remove unused code in hns3_self_test()")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If unicast mac address table is full, and user add a new mac address, the
unicast promisc needs to be enabled for the new unicast mac address can be
used. So does the multicast promisc.
Now this feature has been implemented for PF, and VF should be implemented
too. When the mac table of VF is overflow, PF will enable promisc for this
VF.
Fixes: 1e6e76101f ("net: hns3: configure promisc mode for VF asynchronously")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, if function adds an existing unicast mac address, eventhough
driver will not add this address into hardware, but it will return 0 in
function hclge_add_uc_addr_common(). It will cause the state of this
unicast mac address is ACTIVE in driver, but it should be in TO-ADD state.
To fix this problem, function hclge_add_uc_addr_common() returns -EEXIST
if mac address is existing, and delete two error log to avoid printing
them all the time after this modification.
Fixes: 72110b5674 ("net: hns3: return 0 and print warning when hit duplicate MAC")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
HCLGE_FLAG_MQPRIO_ENABLE is supposed to set when enable
multiple TCs with tc mqprio, and HCLGE_FLAG_DCB_ENABLE is
supposed to set when enable multiple TCs with ets. But
the driver mixed the flags when updating the tm configuration.
Furtherly, PFC should be available when HCLGE_FLAG_MQPRIO_ENABLE
too, so remove the unnecessary limitation.
Fixes: 5a5c909174 ("net: hns3: add support for tc mqprio offload")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For destroy mqprio is irreversible in stack, so it's unnecessary
to rollback the tc configuration when destroy mqprio failed.
Otherwise, it may cause the configuration being inconsistent
between driver and netstack.
As the failure is usually caused by reset, and the driver will
restore the configuration after reset, so it can keep the
configuration being consistent between driver and hardware.
Fixes: 5a5c909174 ("net: hns3: add support for tc mqprio offload")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, in function hns3_nic_set_real_num_queue(), the
driver doesn't report the queue count and offset for disabled
tc. If user enables multiple TCs, but only maps user
priorities to partial of them, it may cause the queue range
of the unmapped TC being displayed abnormally.
Fix it by removing the tc enable checking, ensure the queue
count is not zero.
With this change, the tc_en is useless now, so remove it.
Fixes: a75a8efa00 ("net: hns3: Fix tc setup when netdev is first up")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Johnston says:
====================
Updates to MCTP core
This series adds timeouts for MCTP tags (a limited resource), and a few
other improvements to the MCTP core.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A route's RTAX_MTU can be set in nested RTAX_METRICS
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Describe common flows and refcounting behaviour.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a future change, we'll want to provide a registration call for
mctp-specific devices. This requires us to have the networks established
before device driver inits, so run the core init as a subsys_initcall.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tag allocation, release and bind events are somewhat opaque outside
the kernel; this change adds a few tracepoints to assist in
instrumentation and debugging.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, a MCTP (local-eid,remote-eid,tag) tuple is allocated to a
socket on send, and only expires when the socket is closed.
This change introduces a tag timeout, freeing the tuple after a fixed
expiry - currently six seconds. This is greater than (but close to) the
max response timeout in upper-layer bindings.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we tie the struct mctp_dev lifetime to the underlying struct
net_device, and hold/put that device as a proxy for a separate mctp_dev
refcount. This works because we're not holding any references to the
mctp_dev that are different from the netdev lifetime.
In a future change we'll break that assumption though, as we'll need to
hold mctp_dev references in a workqueue, which might live past the
netdev unregister notification.
In order to support that, this change introduces a refcount on the
mctp_dev, currently taken by the net_device->mctp_ptr reference, and
released on netdev unregister events. We can then use this for future
references that might outlast the net device.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
We will want to invalidate sk_keys in a future change, which will
require a boolean flag to mark invalidated items in the socket & net
namespace lists. We'll also need to take a reference to keys, held over
non-atomic contexts, so we need a refcount on keys also.
This change adds a validity flag (currently always true) and refcount to
struct mctp_sk_key. With a refcount on the keys, using RCU no longer
makes much sense; we have exact indications on the lifetime of keys. So,
we also change the RCU list traversal to a locked implementation.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
We may need to receive packets addressed to the null EID (==0), but
addressed to us at the physical layer.
This change adds a lookup for local routes when we see a packet
addressed to EID 0, and a local phys address.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allowing TUN is useful for testing, to route packets to userspace or to
tunnel between machines.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The LAN8804 PHY has same features as that of LAN8814 PHY except that it
doesn't support 1588, SyncE or Q-USGMII.
This PHY is found inside the LAN966X switches.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ixgbe driver currently generates a NULL pointer dereference with
some machine (online cpus < 63). This is due to the fact that the
maximum value of num_xdp_queues is nr_cpu_ids. Code is in
"ixgbe_set_rss_queues"".
Here's how the problem repeats itself:
Some machine (online cpus < 63), And user set num_queues to 63 through
ethtool. Code is in the "ixgbe_set_channels",
adapter->ring_feature[RING_F_FDIR].limit = count;
It becomes 63.
When user use xdp, "ixgbe_set_rss_queues" will set queues num.
adapter->num_rx_queues = rss_i;
adapter->num_tx_queues = rss_i;
adapter->num_xdp_queues = ixgbe_xdp_queues(adapter);
And rss_i's value is from
f = &adapter->ring_feature[RING_F_FDIR];
rss_i = f->indices = f->limit;
So "num_rx_queues" > "num_xdp_queues", when run to "ixgbe_xdp_setup",
for (i = 0; i < adapter->num_rx_queues; i++)
if (adapter->xdp_ring[i]->xsk_umem)
It leads to panic.
Call trace:
[exception RIP: ixgbe_xdp+368]
RIP: ffffffffc02a76a0 RSP: ffff9fe16202f8d0 RFLAGS: 00010297
RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 000000000000001c RDI: ffffffffa94ead90
RBP: ffff92f8f24c0c18 R8: 0000000000000000 R9: 0000000000000000
R10: ffff9fe16202f830 R11: 0000000000000000 R12: ffff92f8f24c0000
R13: ffff9fe16202fc01 R14: 000000000000000a R15: ffffffffc02a7530
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
7 [ffff9fe16202f8f0] dev_xdp_install at ffffffffa89fbbcc
8 [ffff9fe16202f920] dev_change_xdp_fd at ffffffffa8a08808
9 [ffff9fe16202f960] do_setlink at ffffffffa8a20235
10 [ffff9fe16202fa88] rtnl_setlink at ffffffffa8a20384
11 [ffff9fe16202fc78] rtnetlink_rcv_msg at ffffffffa8a1a8dd
12 [ffff9fe16202fcf0] netlink_rcv_skb at ffffffffa8a717eb
13 [ffff9fe16202fd40] netlink_unicast at ffffffffa8a70f88
14 [ffff9fe16202fd80] netlink_sendmsg at ffffffffa8a71319
15 [ffff9fe16202fdf0] sock_sendmsg at ffffffffa89df290
16 [ffff9fe16202fe08] __sys_sendto at ffffffffa89e19c8
17 [ffff9fe16202ff30] __x64_sys_sendto at ffffffffa89e1a64
18 [ffff9fe16202ff38] do_syscall_64 at ffffffffa84042b9
19 [ffff9fe16202ff50] entry_SYSCALL_64_after_hwframe at ffffffffa8c0008c
So I fix ixgbe_max_channels so that it will not allow a setting of queues
to be higher than the num_online_cpus(). And when run to ixgbe_xdp_setup,
take the smaller value of num_rx_queues and num_xdp_queues.
Fixes: 4a9b32f30f ("ixgbe: fix potential RX buffer starvation for AF_XDP")
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
t-queue
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-09-28
This series contains updates to ice driver only.
Dave adds support for QoS DSCP allowing for DSCP to TC mapping via APP
TLVs.
Ani adds enforcement of DSCP to only supported devices with the
introduction of a feature bitmap and corrects messaging of unsupported
modules based on link mode.
Jake refactors devlink info functions to be void as the functions no
longer return errors.
Jeff fixes a macro name to properly reflect the value.
Len Baker converts a kzalloc allocation to, the preferred, kcalloc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Subbaraya Sundeep <sbhatta@marvell.com>
====================
octeontx2: Add PTP support for VFs
PTP is a shared hardware block which can prepend
RX timestamps to packets before directing packets to
PFs or VFs and can notify the TX timestamps to PFs or VFs
via TX completion queue descriptors. Hence adding PTP
support for VFs is exactly similar to PFs with minimal changes.
This patchset adds that PTP support for VFs.
Patch 1 - When an interface is set in promisc/multicast
the same setting is not retained when changing mtu or channels.
This is due to toggling of the interface by driver but not
calling set_rx_mode in the down-up sequence. Since setting
an interface to multicast properly is required for ptp this is
addressed in this patch.
Patch 2 - Changes in VF driver for registering timestamping
ethtool ops and ndo_ioctl.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds PTP PHC support to NIX VF interfaces. This enables
a VF to run PTP master/slave instance. PTP block being a shared
hardware resource it is recommended to avoid running multiple
PTP instances in the system which will impact the PTP clock
accuracy.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever the interface is brought up/down then set_rx_mode
function is called by the stack which enables promisc/allmulti
MCAM entries. But there are cases when driver brings
interface down and then up such as while changing number
of channels. In these cases promisc/allmulti MCAM entries
are left disabled as set_rx_mode callback is not called.
This patch enables these MCAM entries in all such cases.
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
