Stuffing the PASID mapping into the VM flush isn't flexible enough since
the PASID mapping changes not as often as we need a VM flush.
v2: add missing use of gmc_v7_0_emit_pasid_mapping
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously, the number of software segmets per region was reduced to 16.
This needs to be reflected in the sampling distance (increment) used when
translating to the hardware format.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some refactoring and optimizations in color module.
Added de gamma 2.2 & 2.4, also re gamma 2.2.
Added interface for diagnostic for de gamma & de pq.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add basic logging for DPCD access. Does not print
by default.
Currently only prints first byte of the data accessed.
Technical debt: Need to make it so that the entire
data block accessed is printed. Also need to log
address space that's not DPCD.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Brightness couldn't change when booting up in DC mode.
It was because "psr_enabled" flag was not set to true before
setting vsc packet revision, causing packet rev setup was skipped.
Now instead of checking the psr flag, it checks if the DPCD_REV >= 1.2
and set the vsc packet revision.
Signed-off-by: Tao <xtao@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have an mst dock firmware that will emulate an EDID with bad
checksum.
v2: Tread -> Treat
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Identical to the two entries above them.
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously, FBC dynamic allocation relied on connector modes
populated during dm init. This is only the case if
DRM_FBDEV_EMULATION config flag is enabled.
Moving fbc allocation from dm_late_init() to
amdgpu_dm_connector_get_modes() where actual modes init happens.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Shirish Shankarappa <Shirish.S@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
HDMI HPD's generic solution makes the monitor
patch code unnecessary so anything related has
been removed.
Signed-off-by: John Barberiz <jbarberi@amd.com>
Reviewed-by: John Barberiz <jbarberi@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Skipping the first frame will prevent uncoooked values most of the time.
However, in some unlikely cases, the second frame will be uncooked as
well.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement CRC for DCE8. Registers remain the same, so call DCE110 code
directly.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clear up the logic, and enable programming truncation as a bit reduction
mode.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When user-mode is using 8bpc, the hardware represents it internally
using a higher bit depth. This causes problems when comparing CRCs for
color managment tests.
We need to disable dithering as well, since it makes CRC values
non-deterministic.
It's easy to see why dithering needs to be disabled, The reason why
truncation also needs to be enabled is better described with an example.
Consider the folowing which tests the color transform matrix (CTM):
Expected CRC = FB_A -> Degamma (Bypassed) -> CTM (Bypassed)
|
v
Obtain CRC <- Regamma(Bypassed)
Actual CRC = FB_B -> Degamma (Bypassed) -> CTM (0.5*Identity)
|
v
Obtain CRC <- Regamma(Bypassed)
FB_A contains a solid red color at half intensity (127 @ 8bpc)
FB_B contains a solid red color at full intensity (255 @ 8bpc)
We expect that Expected CRC = Actual CRC, but that's not the case. When
the CTM is applied, the output is at half intensity, but also at a
higher bit depth within hardware. i.e. 255/2 = 127.5: not representable
in 8bpc, but can be at 10bpc. This causes the two CRC's to be different.
The solution is to truncate the output bit depth to the same as input
when enabling CRC capture. Since Linux only supports 8bpc, hard code
that for now.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We will need this to disable dither for CRC capture.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hookup new color management functions into amdgpu_dm:
- Notify DRM that we support CRTC color management during CRTC init
- Call color management functions within atomic check to update dc
states in preparation for a commit
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement color management functionalities within amdgpu_dm_color, and
expose functions within amdgpu_dm.h.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also guard includes that we don't need.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MAX_LOW_POINT macro should reflect the maximum low point within
hardware. Otherwise, sampling for the hardware points from the output
transfer function (OTF) will be incorrect.
Also, fix usage of MAX_LOW_POINT accordingly.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Both functions are the same
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This path fixed specific eDP panel cold boot black screen
due to unnecessary enable link.
Change:
In case of boot up with eDP, if OS is going to set mode
on eDP, keep eDP light up, do not disable and reset corresponding
HW.
This change may affect dce asics and S3/S4 Resume with multi-monitor.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These should only be non-0 if big hammer w/a is implemented. Currently
DC doesn't implement it, so leave them 0.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description] For MST, DC already notify MST sink for MST mode, DC stll
check DP SINK DPCD register to see if MST enabled. DP RX firmware may
not handle this properly.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Disabled HPD filter and used HPD software timer instead
- Allows DM to disable HPD filtering
Signed-off-by: John Barberiz <jbarberi@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: Use NULL and reverse christmas tree ordering
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_dm_display_resume is now called from dm_resume to
unify DAL resume call into a single function call
There is no more need to separately call 2 resume functions
for DM.
Initially they were separated to resume display state after
cursor is pinned. But because there is no longer any corruption
with the cursor - the calls can be merged into one function hook.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Start to use amdgpu_bo_create_reserved v2.
v2:
Fix missing pointer init to NULL.
Remove extra new lines.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Tested-and-Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We didn't synced the BO after validating it. Also sart to use
amdgpu_bo_create_reserved to simplify things.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Missed that with a previous change that removed unused files.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The subsystem should check that, not the driver.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The subsystem should check that, not the driver.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stop calling the driver callback directly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
calcs uses the compiler option -mpreferred-stack-boundary=4 to configure
a stack alignment of 16 bytes. Clang uses the option -mstack-alignment
instead, which expects as parameter the alignment in bytes, and not a
power of two like -mpreferred-stack-boundary.
Probe for both compiler options and use the correct one, similar to
what is done in arch/x86/Makefile.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DML uses the compiler option -mpreferred-stack-boundary=4 to configure
a stack alignment of 16 bytes. Clang uses the option -mstack-alignment
instead, which expects as parameter the alignment in bytes, and not a
power of two like -mpreferred-stack-boundary.
Probe for both compiler options and use the correct one, similar to
what is done in arch/x86/Makefile.
Reported-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use a variable for common CFLAGS instead of specifying the same flags
for every source file.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use a variable for common CFLAGS instead of specifying the same flags
for every source file.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add common smu_soc_asic_init function to emulate the sillicon post sequence
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
