Default age threshold value is missed to set, fix it.
Fixes: 093749e296 ("f2fs: support age threshold based garbage collection")
Reported-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Restruct f2fs page private layout for below reasons:
There are some cases that f2fs wants to set a flag in a page to
indicate a specified status of page:
a) page is in transaction list for atomic write
b) page contains dummy data for aligned write
c) page is migrating for GC
d) page contains inline data for inline inode flush
e) page belongs to merkle tree, and is verified for fsverity
f) page is dirty and has filesystem/inode reference count for writeback
g) page is temporary and has decompress io context reference for compression
There are existed places in page structure we can use to store
f2fs private status/data:
- page.flags: PG_checked, PG_private
- page.private
However it was a mess when we using them, which may cause potential
confliction:
page.private PG_private PG_checked page._refcount (+1 at most)
a) -1 set +1
b) -2 set
c), d), e) set
f) 0 set +1
g) pointer set
The other problem is page.flags has no free slot, if we can avoid set
zero to page.private and set PG_private flag, then we use non-zero value
to indicate PG_private status, so that we may have chance to reclaim
PG_private slot for other usage. [1]
The other concern is f2fs has bad scalability in aspect of indicating
more page status.
So in this patch, let's restructure f2fs' page.private as below to
solve above issues:
Layout A: lowest bit should be 1
| bit0 = 1 | bit1 | bit2 | ... | bit MAX | private data .... |
bit 0 PAGE_PRIVATE_NOT_POINTER
bit 1 PAGE_PRIVATE_ATOMIC_WRITE
bit 2 PAGE_PRIVATE_DUMMY_WRITE
bit 3 PAGE_PRIVATE_ONGOING_MIGRATION
bit 4 PAGE_PRIVATE_INLINE_INODE
bit 5 PAGE_PRIVATE_REF_RESOURCE
bit 6- f2fs private data
Layout B: lowest bit should be 0
page.private is a wrapped pointer.
After the change:
page.private PG_private PG_checked page._refcount (+1 at most)
a) 11 set +1
b) 101 set +1
c) 1001 set +1
d) 10001 set +1
e) set
f) 100001 set +1
g) pointer set +1
[1] https://lore.kernel.org/linux-f2fs-devel/20210422154705.GO3596236@casper.infradead.org/T/#u
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch combined the below three clean-up patches.
- modify open brace '{' following function definitions
- ERROR: spaces required around that ':'
- ERROR: spaces required before the open parenthesis '('
- ERROR: spaces prohibited before that ','
- Made suggested modifications from checkpatch in reference to WARNING:
Missing a blank line after declarations
Signed-off-by: Yi Zhuang <zhuangyi1@huawei.com>
Signed-off-by: Jia Yang <jiayang5@huawei.com>
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In this patch, we will add two new mount options: "gc_merge" and
"nogc_merge", when background_gc is on, "gc_merge" option can be
set to let background GC thread to handle foreground GC requests,
it can eliminate the sluggish issue caused by slow foreground GC
operation when GC is triggered from a process with limited I/O
and CPU resources.
Original idea is from Xiang.
Signed-off-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In CP disabling mode, there are two issues when using LFS or SSR | AT_SSR
mode to select victim:
1. LFS is set to find source section during GC, the victim should have
no checkpointed data, since after GC, section could not be set free for
reuse.
Previously, we only check valid chpt blocks in current segment rather
than section, fix it.
2. SSR | AT_SSR are set to find target segment for writes which can be
fully filled by checkpointed and newly written blocks, we should never
select such segment, otherwise it can cause panic or data corruption
during allocation, potential case is described as below:
a) target segment has 'n' (n < 512) ckpt valid blocks
b) GC migrates 'n' valid blocks to other segment (segment is still
in dirty list)
c) GC migrates '512 - n' blocks to target segment (segment has 'n'
cp_vblocks and '512 - n' vblocks)
d) If GC selects target segment via {AT,}SSR allocator, however there
is no free space in targe segment.
Fixes: 4354994f09 ("f2fs: checkpoint disabling")
Fixes: 093749e296 ("f2fs: support age threshold based garbage collection")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
AT_SSR mode is introduced by age threshold based GC for better
hot/cold data seperation and avoiding free segment cost. However,
LFS write mode is preferred in the scenario of foreground or high
urgent GC, which should be finished ASAP. Let's only use AT_SSR
in background GC and not high urgent GC modes.
Signed-off-by: Weichao Guo <guoweichao@oppo.com>
Signed-off-by: Huang Jianan <huangjianan@oppo.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_resize_fs() hangs in below callstack with testcase:
- mkfs 16GB image & mount image
- dd 8GB fileA
- dd 8GB fileB
- sync
- rm fileA
- sync
- resize filesystem to 8GB
kernel BUG at segment.c:2484!
Call Trace:
allocate_segment_by_default+0x92/0xf0 [f2fs]
f2fs_allocate_data_block+0x44b/0x7e0 [f2fs]
do_write_page+0x5a/0x110 [f2fs]
f2fs_outplace_write_data+0x55/0x100 [f2fs]
f2fs_do_write_data_page+0x392/0x850 [f2fs]
move_data_page+0x233/0x320 [f2fs]
do_garbage_collect+0x14d9/0x1660 [f2fs]
free_segment_range+0x1f7/0x310 [f2fs]
f2fs_resize_fs+0x118/0x330 [f2fs]
__f2fs_ioctl+0x487/0x3680 [f2fs]
__x64_sys_ioctl+0x8e/0xd0
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The root cause is we forgot to check that whether we have enough space
in resized filesystem to store all valid blocks in before-resizing
filesystem, then allocator will run out-of-space during block migration
in free_segment_range().
Fixes: b4b10061ef ("f2fs: refactor resize_fs to avoid meta updates in progress")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
F2FS_IOC_FLUSH_DEVICE/F2FS_IOC_RESIZE_FS needs to migrate all blocks of
target segment to other place, no matter the segment has partially or fully
valid blocks.
However, after commit 803e74be04 ("f2fs: stop GC when the victim becomes
fully valid"), we may skip migration due to target segment is fully valid,
result in failing the ioctl interface, fix this.
Fixes: 803e74be04 ("f2fs: stop GC when the victim becomes fully valid")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Trival cleanups:
- relocate set_summary() before its use
- relocate "allocate block address" to correct place
- remove unneeded f2fs_wait_on_page_writeback()
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use rwsem to ensure serialization of the callers and to avoid
starvation of high priority tasks, when the system is under
heavy IO workload.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After commit 0b6d4ca04a ("f2fs: don't return vmalloc() memory from
f2fs_kmalloc()"), f2fs_k{m,z}alloc() will not return vmalloc()'ed
memory, so clean up to use kfree() instead of kvfree() to free
vmalloc()'ed memory.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are several issues in current background GC algorithm:
- valid blocks is one of key factors during cost overhead calculation,
so if segment has less valid block, however even its age is young or
it locates hot segment, CB algorithm will still choose the segment as
victim, it's not appropriate.
- GCed data/node will go to existing logs, no matter in-there datas'
update frequency is the same or not, it may mix hot and cold data
again.
- GC alloctor mainly use LFS type segment, it will cost free segment
more quickly.
This patch introduces a new algorithm named age threshold based
garbage collection to solve above issues, there are three steps
mainly:
1. select a source victim:
- set an age threshold, and select candidates beased threshold:
e.g.
0 means youngest, 100 means oldest, if we set age threshold to 80
then select dirty segments which has age in range of [80, 100] as
candiddates;
- set candidate_ratio threshold, and select candidates based the
ratio, so that we can shrink candidates to those oldest segments;
- select target segment with fewest valid blocks in order to
migrate blocks with minimum cost;
2. select a target victim:
- select candidates beased age threshold;
- set candidate_radius threshold, search candidates whose age is
around source victims, searching radius should less than the
radius threshold.
- select target segment with most valid blocks in order to avoid
migrating current target segment.
3. merge valid blocks from source victim into target victim with
SSR alloctor.
Test steps:
- create 160 dirty segments:
* half of them have 128 valid blocks per segment
* left of them have 384 valid blocks per segment
- run background GC
Benefit: GC count and block movement count both decrease obviously:
- Before:
- Valid: 86
- Dirty: 1
- Prefree: 11
- Free: 6001 (6001)
GC calls: 162 (BG: 220)
- data segments : 160 (160)
- node segments : 2 (2)
Try to move 41454 blocks (BG: 41454)
- data blocks : 40960 (40960)
- node blocks : 494 (494)
IPU: 0 blocks
SSR: 0 blocks in 0 segments
LFS: 41364 blocks in 81 segments
- After:
- Valid: 87
- Dirty: 0
- Prefree: 4
- Free: 6008 (6008)
GC calls: 75 (BG: 76)
- data segments : 74 (74)
- node segments : 1 (1)
Try to move 12813 blocks (BG: 12813)
- data blocks : 12544 (12544)
- node blocks : 269 (269)
IPU: 0 blocks
SSR: 12032 blocks in 77 segments
LFS: 855 blocks in 2 segments
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Don't let f2fs inner GC ruins original aging degree of segment.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previous implementation of aligned pinfile allocation will:
- allocate new segment on cold data log no matter whether last used
segment is partially used or not, it makes IOs more random;
- force concurrent cold data/GCed IO going into warm data area, it
can make a bad effect on hot/cold data separation;
In this patch, we introduce a new type of log named 'inmem curseg',
the differents from normal curseg is:
- it reuses existed segment type (CURSEG_XXX_NODE/DATA);
- it only exists in memory, its segno, blkofs, summary will not b
persisted into checkpoint area;
With this new feature, we can enhance scalability of log, special
allocators can be created for purposes:
- pure lfs allocator for aligned pinfile allocation or file
defragmentation
- pure ssr allocator for later feature
So that, let's update aligned pinfile allocation to use this new
inmem curseg fwk.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
NVMe Zoned Namespace devices can have zone-capacity less than zone-size.
Zone-capacity indicates the maximum number of sectors that are usable in
a zone beginning from the first sector of the zone. This makes the sectors
sectors after the zone-capacity till zone-size to be unusable.
This patch set tracks zone-size and zone-capacity in zoned devices and
calculate the usable blocks per segment and usable segments per section.
If zone-capacity is less than zone-size mark only those segments which
start before zone-capacity as free segments. All segments at and beyond
zone-capacity are treated as permanently used segments. In cases where
zone-capacity does not align with segment size the last segment will start
before zone-capacity and end beyond the zone-capacity of the zone. For
such spanning segments only sectors within the zone-capacity are used.
During writes and GC manage the usable segments in a section and usable
blocks per segment. Segments which are beyond zone-capacity are never
allocated, and do not need to be garbage collected, only the segments
which are before zone-capacity needs to garbage collected.
For spanning segments based on the number of usable blocks in that
segment, write to blocks only up to zone-capacity.
Zone-capacity is device specific and cannot be configured by the user.
Since NVMe ZNS device zones are sequentially write only, a block device
with conventional zones or any normal block device is needed along with
the ZNS device for the metadata operations of F2fs.
A typical nvme-cli output of a zoned device shows zone start and capacity
and write pointer as below:
SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ
SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ
SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ
Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones
are in EMPTY state. For each zone, only zone start + 49MB is usable area,
any lba/sector after 49MB cannot be read or written to, the drive will fail
any attempts to read/write. So, the second zone starts at 64MB and is
usable till 113MB (64 + 49) and the range between 113 and 128MB is
again unusable. The next zone starts at 128MB, and so on.
Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Added a new gc_urgent mode, GC_URGENT_LOW, in which mode
F2FS will lower the bar of checking idle in order to
process outstanding discard commands and GC a little bit
aggressively.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If f2fs_grab_cache_page() fails, it needs to return -ENOMEM.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When f2fs_ioc_gc_range performs multiple segments gc ops, the return
value of f2fs_ioc_gc_range is determined by the last segment gc ops.
If its ops failed, the f2fs_ioc_gc_range will be considered to be failed
despite some of previous segments gc ops succeeded. Therefore, so we
fix: Redefine the return value of getting victim ops and add exception
handle for f2fs_gc. In particular, 1).if target has no valid block, it
will go on. 2).if target sectoion has valid block(s), but it is current
section, we will reminder the caller.
Signed-off-by: Qilong Zhang <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use validation of @fio to inidcate whether caller want to serialize IOs
in io.io_list or not, then @add_list will be redundant, remove it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Assume each section has 4 segment:
.___________________________.
|_Segment0_|_..._|_Segment3_|
. .
. .
.__________.
|_section0_|
Segment 0~2 has 0 valid block, segment 3 has 512 valid blocks.
It will fail if we want to gc section0 in this scenes,
because all 4 segments in section0 is not dirty.
So we should use dirty section bitmap instead of dirty segment bitmap
to get right victim section.
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Sahitya raised an issue:
- prevent meta updates while checkpoint is in progress
allocate_segment_for_resize() can cause metapage updates if
it requires to change the current node/data segments for resizing.
Stop these meta updates when there is a checkpoint already
in progress to prevent inconsistent CP data.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Data flush can generate heavy IO and cause long latency during
flush, so it's not appropriate to trigger it in foreground
operation.
And also, we may face below potential deadlock during data flush:
- f2fs_write_multi_pages
- f2fs_write_raw_pages
- f2fs_write_single_data_page
- f2fs_balance_fs
- f2fs_balance_fs_bg
- f2fs_sync_dirty_inodes
- filemap_fdatawrite -- stuck on flush same cluster
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fields in struct f2fs_super_block should be updated under coverage
of sb_lock, fix to adjust update_sb_metadata() for that rule.
Fixes: 04f0b2eaa3 ("f2fs: ioctl for removing a range from F2FS")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Even though online resize is successfully done, a SPO immediately
after resize, still causes below error in the next mount.
[ 11.294650] F2FS-fs (sda8): Wrong user_block_count: 2233856
[ 11.300272] F2FS-fs (sda8): Failed to get valid F2FS checkpoint
This is because after FS metadata is updated in update_fs_metadata()
if the SBI_IS_DIRTY is not dirty, then CP will not be done to reflect
the new user_block_count.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Geert Uytterhoeven reported:
for parameter HZ/50 in congestion_wait(BLK_RW_ASYNC, HZ/50);
On some platforms, HZ can be less than 50, then unexpected 0 timeout
jiffies will be set in congestion_wait().
This patch introduces a macro DEFAULT_IO_TIMEOUT to wrap a determinate
value with msecs_to_jiffies(20) to instead HZ/50 to avoid such issue.
Quoted from Geert Uytterhoeven:
"A timeout of HZ means 1 second.
HZ/50 means 20 ms, but has the risk of being zero, if HZ < 50.
If you want to use a timeout of 20 ms, you best use msecs_to_jiffies(20),
as that takes care of the special cases, and never returns 0."
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If first segment is empty and migration_granularity is 1, we can't move this
at all.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are three status for background gc: on, off and sync, it's
a little bit confused to use test_opt(BG_GC) and test_opt(FORCE_FG_GC)
combinations to indicate status of background gc.
So let's remove F2FS_MOUNT_BG_GC and F2FS_MOUNT_FORCE_FG_GC mount
options, and add F2FS_OPTION().bggc_mode with below three status
to clean up codes and enhance bggc mode's scalability.
enum {
BGGC_MODE_ON, /* background gc is on */
BGGC_MODE_OFF, /* background gc is off */
BGGC_MODE_SYNC, /*
* background gc is on, migrating blocks
* like foreground gc
*/
};
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch removes F2FS_MOUNT_ADAPTIVE and F2FS_MOUNT_LFS mount options,
and add F2FS_OPTION.fs_mode with below two status to indicate filesystem
mode.
enum {
FS_MODE_ADAPTIVE, /* use both lfs/ssr allocation */
FS_MODE_LFS, /* use lfs allocation only */
};
It can enhance code readability and fs mode's scalability.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- rename datablock_addr() to data_blkaddr().
- wrap data_blkaddr() with f2fs_data_blkaddr() to clean up
parameters.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Lack of maintenance on comments may mislead developers, fix them.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently f2fs stats are only available from /d/f2fs/status. This patch
adds some of the f2fs stats to sysfs so that they are accessible even
when debugfs is not mounted.
The following sysfs nodes are added:
-/sys/fs/f2fs/<disk>/free_segments
-/sys/fs/f2fs/<disk>/cp_foreground_calls
-/sys/fs/f2fs/<disk>/cp_background_calls
-/sys/fs/f2fs/<disk>/gc_foreground_calls
-/sys/fs/f2fs/<disk>/gc_background_calls
-/sys/fs/f2fs/<disk>/moved_blocks_foreground
-/sys/fs/f2fs/<disk>/moved_blocks_background
-/sys/fs/f2fs/<disk>/avg_vblocks
Signed-off-by: Hridya Valsaraju <hridya@google.com>
[Jaegeuk Kim: allow STAT_FS without DEBUG_FS]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Mutex lock won't serialize callers, in order to avoid starving of unlucky
caller, let's use rwsem lock instead.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We must stop GC, once the segment becomes fully valid. Otherwise, it can
produce another dirty segments by moving valid blocks in the segment partially.
Ramon hit no free segment panic sometimes and saw this case happens when
validating reliable file pinning feature.
Signed-off-by: Ramon Pantin <pantin@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Eric mentioned, bare printk{,_ratelimited} won't show which
filesystem instance these message is coming from, this patch tries
to show fs instance with sb->s_id field in all places we missed
before.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Multi-device metadata should be updated in resize_fs as well.
Also, we check that the new FS size still reaches the last device.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Policy - foreground GC, LFS mode and greedy GC mode.
Under this policy, f2fs_gc() loops forever to GC as it doesn't have
enough free segements to proceed and thus it keeps calling gc_more
for the same victim segment. This can happen if the selected victim
segment could not be GC'd due to failed blkaddr validity check i.e.
is_alive() returns false for the blocks set in current validity map.
Fix this by not resetting the sbi->cur_victim_sec to NULL_SEGNO, when
the segment selected could not be GC'd. This helps to select another
segment for GC and thus helps to proceed forward with GC.
[Note]
This can happen due to is_alive as well as atomic_file which skipps
GC.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Policy - Foreground GC, LFS and greedy GC mode.
Under this policy, f2fs_gc() loops forever to GC as it doesn't have
enough free segements to proceed and thus it keeps calling gc_more
for the same victim segment. This can happen if the selected victim
segment could not be GC'd due to failed blkaddr validity check i.e.
is_alive() returns false for the blocks set in current validity map.
Fix this by keeping track of such invalid segments and skip those
segments for selection in get_victim_by_default() to avoid endless
GC loop under such error scenarios. Currently, add this logic under
CONFIG_F2FS_CHECK_FS to be able to root cause the issue in debug
version.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix wrong bitmap size]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_allocate_data_block() invalidates old block address and enable new block
address. Then, if we try to read old block by f2fs_submit_page_bio(), it will
give WARN due to reading invalid blocks.
Let's make the order sanely back.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs uses EFAULT as error number to indicate filesystem is corrupted
all the time, but generic filesystems use EUCLEAN for such condition,
we need to change to follow others.
This patch adds two new macros as below to wrap more generic error
code macros, and spread them in code.
EFSBADCRC EBADMSG /* Bad CRC detected */
EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- Add and use f2fs_<level> macros
- Convert f2fs_msg to f2fs_printk
- Remove level from f2fs_printk and embed the level in the format
- Coalesce formats and align multi-line arguments
- Remove unnecessary duplicate extern f2fs_msg f2fs.h
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This ioctl shrinks a given length (aligned to sections) from end of the
main area. Any cursegs and valid blocks will be moved out before
invalidating the range.
This feature can be used for adjusting partition sizes online.
History of the patch:
Sahitya Tummala:
- Add this ioctl for f2fs_compat_ioctl() as well.
- Fix debugfs status to reflect the online resize changes.
- Fix potential race between online resize path and allocate new data
block path or gc path.
Others:
- Rename some identifiers.
- Add some error handling branches.
- Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range.
- Implement this interface as ext4's, and change the parameter from shrunk
bytes to new block count of F2FS.
- During resizing, force to empty sit_journal and forbid adding new
entries to it, in order to avoid invalid segno in journal after resize.
- Reduce sbi->user_block_count before resize starts.
- Commit the updated superblock first, and then update in-memory metadata
only when the former succeeds.
- Target block count must align to sections.
- Write checkpoint before and after committing the new superblock, w/o
CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if
resize fails after the new superblock is committed.
- In free_segment_range(), reduce granularity of gc_mutex.
- Add protection on curseg migration.
- Add freeze_bdev() and thaw_bdev() for resize fs.
- Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation.
- Recover super_block and FS metadata when resize fails.
- No need to clear CP_FSCK_FLAG in update_ckpt_flags().
- Clean up the sb and fs metadata update functions for resize_fs.
Geert Uytterhoeven:
- Use div_u64*() for 64-bit divisions
Arnd Bergmann:
- Not all architectures support get_user() with a 64-bit argument:
ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined!
Use copy_from_user() here, this will always work.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215https://bugzilla.kernel.org/show_bug.cgi?id=203223https://bugzilla.kernel.org/show_bug.cgi?id=203231https://bugzilla.kernel.org/show_bug.cgi?id=203235https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch expands scalability of dnode layout, it allows address pointer
number of dnode aligning to specified size (now, the size is one byte by
default), and later the number can align to compress cluster size
(1 << n bytes, n=[2,..)), it can avoid cluster acrossing two dnode, making
design of compress meta layout simple.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
