Contrary to previous SoCs, bcm2711 doesn't have a prescaler in the PLL
feedback loop. Bypass it by zeroing fb_prediv_mask when running on
bcm2711.
Note that, since the prediv configuration bits were re-purposed, this
was triggering miscalculations on all clocks hanging from the VPU clock,
notably the aux UART, making its output unintelligible.
Fixes: 42de9ad400 ("clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200730182619.23246-1-nsaenzjulienne@suse.de
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Change from 'DIV_ROUND_UP' to 'DIV_ROUND_CLOSEST' when calculating the
clock divisor in the iProc ASIU clock driver to allow to get to the
closest clock rate.
Fixes: 5fe225c105 ("clk: iproc: add initial common clock support")
Signed-off-by: Lori Hikichi <lhikichi@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Link: https://lore.kernel.org/r/20200612225212.124301-1-ray.jui@broadcom.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The driver for the DVP controller in the BCM2711 was missing the MODULE_*
macros resulting in a modpost warning at compilation.
Fixes: 1bc9597271 ("clk: bcm: Add BCM2711 DVP driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200626112513.90816-1-maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The CPU clock has had so far a bunch of quirks to expose the clock tree
properly, but since we reverted to exposing them through the MMIO driver,
we can remove that code from the firmware driver.
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/acdf820c2f78a25dd7480a0c018b8b387acd013e.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The PLLB rate will be changed through the firmware clocks drivers and will
change behind this drivers' back, so we don't want to cache the rate.
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/9864daba2f584ed49aee5ed1d2f4d48507c58197.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
While some clock types allow for each clock to specify its own custom
flags, the PLLs can't. We will need this for the PLLB, so let's add it.
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/ae8bd505d8851f6646e244cd76b6b289346973c8.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This reverts commit 2256d89333. Since we
will be expanding the firmware clock driver, we'll need to remove the
quirks to deal with the PLLB. However, we still want to expose the clock
tree properly, so having that clock in the MMIO driver will allow that.
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/5d26a4c58248f5be7760a7f2f720a1310baea5dd.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
We've registered the firmware clocks using their ID as name, but it's much
more convenient to register them using their proper name. Since the
firmware doesn't provide it, we have to duplicate it.
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/a52a5f5768cd33716cdd35237c6613f26ad75013.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The RaspberryPi4 firmware actually exposes more clocks than are currently
handled by the driver and we will need to change some of them directly
based on the pixel rate for the display related clocks, or the load for the
GPU.
Since the firmware implements DVFS, this rate change can have a number of
side-effects, including adjusting the various PLL voltages or the PLL
parents. The firmware also implements thermal throttling, so even some
thermal pressure can change those parameters behind Linux back.
DVFS is currently implemented on the arm, core, h264, v3d, isp and hevc
clocks, so updating any of them using the MMIO driver (and thus behind the
firmware's back) can lead to troubles, the arm clock obviously being the
most problematic.
In order to make Linux play as nice as possible with those constraints, it
makes sense to rely on the firmware clocks as much as possible. However,
the firmware doesn't seem to provide some equivalents to their MMIO
counterparts, so we can't really replace that driver entirely.
Fortunately, the firmware has an interface to discover the clocks it
exposes.
Let's use it to discover, register the clocks in the clocks framework and
then expose them through the device tree for consumers to use them.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/438d73962741a8c5f7c689319b7443b930a87fde.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
While the firmware allows us to discover the available clocks, we need to
discriminate those clocks to only register the ones meaningful to Linux.
The firmware also doesn't provide a clock name, so having a list of the ID
will help us to give clocks a proper name later on.
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/4738f77ee7de9b48a3bb1c558ead958d0cc064d9.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
For the upcoming registration of the clocks provided by the firmware, make
sure it's exposed to the device tree providers.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/4d8dbe4aaae98b3d3812ad7c3dba53d645cadbaf.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The raspberrypi_register_pllb has been returning an integer so far to
notify whether the functions has exited successfully or not.
However, the OF provider functions in the clock framework require access to
the clk_hw structure so that we can expose those clocks to device tree
consumers.
Since we'll want that for the future clocks, let's return a clk_hw pointer
instead of the return code.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/97218559db643e62fdd2b5e3046a2a05b8c2e769.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The driver only supports the pllb for now and all the clock framework hooks
are a mix of the generic firmware interface and the specifics of the pllb.
Since we will support more clocks in the future let's split the generic and
specific hooks
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/fdc21962fdc7de5c46232f198672d5d5c868ec74.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The raspberrypi_fw_pll_is_on function doesn't only apply to PLL
registered in the driver, but any clock exposed by the firmware.
Since we also implement the is_prepared hook, make the function
consistent with the other function names.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/ac93cc4e245316bb7e7426ac5ab0de8f3d919731.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The raspberry_clock_property only takes the clock ID as an argument, but
now that we have a clock data structure it makes more sense to just pass
that structure instead.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/d7a3b4df3ca23feb6e0d9c7ae2d232bfb913f926.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The driver has really only supported one clock so far and has hardcoded the
ID used in communications with the firmware in all the functions
implementing the clock framework hooks. Let's store that in the clock data
structure so that we can support more clocks later on.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/e23c37961b97b027e21efa3b818578970f88527a.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
So far the driver has really only been providing a single clock, and stored
both the data associated to that clock in particular with the data
associated to the "controller".
Since we will change that in the future, let's decouple the clock data from
the provider data.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/ee7f508db226214fab4add7f93a351f4137c86a1.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The raspberrypi firmware clock driver has a min_rate / max_rate clamping by
storing the info it needs in a private structure.
However, the CCF already provides such a facility, so we can switch to it
to remove the boilerplate.
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/d4c53dab6de5d5f70743d9c139d0117589530e62.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clkdev lookup created for the cpufreq device is never removed if
there's an issue later in probe or at module removal time.
Let's convert to the managed variant of the clk_hw_register_clkdev function
to make sure it happens.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/075e2c6d315eccdaf8fb72b320712b86e6c25b22.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Since we don't care about retrieving the clk_lookup structure pointer
returned by clkdev_hw_create, we can just use the clk_hw_register_clkdev
function.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/59f6208b6fe3367e735b0cca4f65c2c937639af9.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The pllb_arm_lookup pointer in the struct raspberrypi_clk is not used for
anything but to store the returned pointer to clkdev_hw_create, and is not
used anywhere else in the driver.
Let's remove that global pointer from the structure.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/189407f54906d2b07c91de7a4eeb6d8c8934280f.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The pllb_arm clock was created at probe time, but was never removed if
something went wrong later in probe, or if the driver was ever removed from
the system.
Now that we are using clk_hw_register(), we can just use its managed variant
to take care of that for us.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/34254ed1556614658e5dad5cca4cf4fe617df7fc.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The pllb_arm clk_hw pointer in the raspberry_clk structure isn't used
anywhere but in the raspberrypi_register_pllb_arm.
Let's remove it, this will make our lives easier in future patches.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/842859cf1a77478620f45049178a588448202858.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The pllb_arm clock is defined as a fixed factor clock with the pllb
clock as a parent. However, all its configuration is entirely static,
and thus we don't really need to call clk_hw_register_fixed_factor() but
can simply call clk_hw_register() with a static clk_fixed_factor
structure.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/1146177664999eeda65856d28ce94025021dd85e.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Instead of declaring the clk_init_data and then calling memset on it, just
initialise properly.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/0342572daa561dc1bb4c9fd10641b2016493e32b.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The current firmware clock driver for the RaspberryPi can only be probed by
manually registering an associated platform_device.
While this works fine for cpufreq where the device gets attached a clkdev
lookup, it would be tedious to maintain a table of all the devices using
one of the clocks exposed by the firmware.
Since the DT on the other hand is the perfect place to store those
associations, make the firmware clocks driver probe-able through the device
tree so that we can represent it as a node.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/cb8203b862e386ac6c3df3eff0bb5a238b6ec97a.1592210452.git-series.maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The HDMI block has a block that controls clocks and reset signals to the
HDMI0 and HDMI1 controllers.
Let's expose that through a clock driver implementing a clock and reset
provider.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/bb60d97fc76b61c2eabef5a02ebd664c0f57ede0.1591867332.git-series.maxime@cerno.tech
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Now that there are header files for each SoC, let's use them in the
bcm63xx-gate controller driver.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20200615090231.2932696-9-noltari@gmail.com
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the gated clock controllers found on the BCM6318.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200610140858.207329-3-noltari@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In order to make the last clock available, maxbit has to be set to the
highest bit value plus 1.
Fixes: 1c099779c1 ("clk: add BCM63XX gated clock controller driver")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20200609110846.4029620-1-noltari@gmail.com
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
bcm2835_debugfs_clock_reg32 is never changed and can therefore be made
const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
26598 16088 64 42750 a6fe drivers/clk/bcm/clk-bcm2835.o
After:
text data bss dec hex filename
26662 16024 64 42750 a6fe drivers/clk/bcm/clk-bcm2835.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lkml.kernel.org/r/20200508220238.4883-1-rikard.falkeborn@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There are four different callback functions that are used for the
clk_register callback that all have different second parameter types.
bcm2835_register_pll -> struct bcm2835_pll_data
bcm2835_register_pll_divider -> struct bcm2835_pll_divider_data
bcm2835_register_clock -> struct bcm2835_clock_data
bcm2835_register_date -> struct bcm2835_gate_data
These callbacks are cast to bcm2835_clk_register so that there is no
error about incompatible pointer types. Unfortunately, this is a control
flow integrity violation, which verifies that the callback function's
types match the prototypes exactly before jumping.
[ 0.857913] CFI failure (target: 0xffffff9334a81820):
[ 0.857977] WARNING: CPU: 3 PID: 35 at kernel/cfi.c:29 __cfi_check_fail+0x50/0x58
[ 0.857985] Modules linked in:
[ 0.858007] CPU: 3 PID: 35 Comm: kworker/3:1 Not tainted 4.19.123-v8-01301-gdbb48f16956e4-dirty #1
[ 0.858015] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 0.858031] Workqueue: events 0xffffff9334a925c8
[ 0.858046] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 0.858058] pc : __cfi_check_fail+0x50/0x58
[ 0.858070] lr : __cfi_check_fail+0x50/0x58
[ 0.858078] sp : ffffff800814ba90
[ 0.858086] x29: ffffff800814ba90 x28: 000fffffffdfff3d
[ 0.858101] x27: 00000000002000c2 x26: ffffff93355fdb18
[ 0.858116] x25: 0000000000000000 x24: ffffff9334a81820
[ 0.858131] x23: ffffff93357f3580 x22: ffffff9334af1000
[ 0.858146] x21: a79b57e88f8ebc81 x20: ffffff93357f3580
[ 0.858161] x19: ffffff9334a81820 x18: fffffff679769070
[ 0.858175] x17: 0000000000000000 x16: 0000000000000000
[ 0.858190] x15: 0000000000000004 x14: 000000000000003c
[ 0.858205] x13: 0000000000003044 x12: 0000000000000000
[ 0.858220] x11: b57e91cd641bae00 x10: b57e91cd641bae00
[ 0.858235] x9 : b57e91cd641bae00 x8 : b57e91cd641bae00
[ 0.858250] x7 : 0000000000000000 x6 : ffffff933591d4e5
[ 0.858264] x5 : 0000000000000000 x4 : 0000000000000000
[ 0.858279] x3 : ffffff800814b718 x2 : ffffff9334a84818
[ 0.858293] x1 : ffffff9334bba66c x0 : 0000000000000029
[ 0.858308] Call trace:
[ 0.858321] __cfi_check_fail+0x50/0x58
[ 0.858337] __cfi_check+0x3ab3c/0x4467c
[ 0.858351] bcm2835_clk_probe+0x210/0x2dc
[ 0.858369] platform_drv_probe+0xb0/0xfc
[ 0.858380] really_probe+0x4a0/0x5a8
[ 0.858391] driver_probe_device+0x68/0x104
[ 0.858403] __device_attach_driver+0x100/0x148
[ 0.858418] bus_for_each_drv+0xb0/0x12c
[ 0.858431] __device_attach.llvm.17225159516306086099+0xc0/0x168
[ 0.858443] bus_probe_device+0x44/0xfc
[ 0.858455] deferred_probe_work_func+0xa0/0xe0
[ 0.858472] process_one_work+0x210/0x538
[ 0.858485] worker_thread+0x2e8/0x478
[ 0.858500] kthread+0x154/0x164
[ 0.858515] ret_from_fork+0x10/0x18
To fix this, change the second parameter of all functions void * and use
a local variable with the correct type so that everything works
properly. With this, the only use of bcm2835_clk_register is in struct
bcm2835_clk_desc so we can just remove it and use the type directly.
Fixes: 56eb3a2ed9 ("clk: bcm2835: remove use of BCM2835_CLOCK_COUNT in driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1028
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lkml.kernel.org/r/20200516080806.1459784-2-natechancellor@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
bcm2835_register_gate is used as a callback for the clk_register member
of bcm2835_clk_desc, which expects a struct clk_hw * return type but
bcm2835_register_gate returns a struct clk *.
This discrepancy is hidden by the fact that bcm2835_register_gate is
cast to the typedef bcm2835_clk_register by the _REGISTER macro. This
turns out to be a control flow integrity violation, which is how this
was noticed.
Change the return type of bcm2835_register_gate to be struct clk_hw *
and use clk_hw_register_gate to do so. This should be a non-functional
change as clk_register_gate calls clk_hw_register_gate anyways but this
is needed to avoid issues with further changes.
Fixes: b19f009d45 ("clk: bcm2835: Migrate to clk_hw based registration and OF APIs")
Link: https://github.com/ClangBuiltLinux/linux/issues/1028
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lkml.kernel.org/r/20200516080806.1459784-1-natechancellor@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The VPU firmware assume that the PLLD_PER isn't modified by the ARM core.
Otherwise this could cause firmware lookups. So mark the clock as critical
to avoid this.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
The new BCM2711 supports an additional clock for the emmc2 block.
So add a new compatible and register this clock only for BCM2711.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
In order to support SoC specific clocks (e.g. emmc2 for BCM2711), we
extend the description with a SoC support flag. This approach avoids long
and mostly redundant lists of clock IDs. Since PLLH is specific to
BCM2835, we register only rest of the clocks as common to all SoC.
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
side. The two main highlights in the core framework are the addition of an bulk
clk_get API that handles optional clks and an extra debugfs file that tells the
developer about the current parent of a clk.
The driver updates are dominated by i.MX in the diffstat, but that is mostly
because that SoC has started converting to the clk_hw style of clk
registration. The next big update is in the Amlogic meson clk driver that
gained some support for audio, cpu, and temperature clks while fixing some PLL
issues. Finally, the biggest thing that stands out is the conversion of a large
part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses
less strings and more pointer comparisons to match clk parents and children up.
In general, it looks like we have a lot of little fixes and tweaks here and
there to clk data along with the normal addition of a handful of new drivers
and a couple new core framework features.
Core:
- Add a 'clk_parent' file in clk debugfs
- Add a clk_bulk_get_optional() API (with devm too)
New Drivers:
- Support gated clk controller on MIPS based BCM63XX SoCs
- Support SiLabs Si5341 and Si5340 chips
- Support for CPU clks on Raspberry Pi devices
- Audsys clock driver for MediaTek MT8516 SoCs
Updates:
- Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
- Small frequency support for SiLabs Si544 chips
- Slow clk support for AT91 SAM9X60 SoCs
- Remove dead code in various clk drivers (-Wunused)
- Support for Marvell 98DX1135 SoCs
- Get duty cycle of generic pwm clks
- Improvement in mmc phase calculation and cleanup of some rate defintions
- Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
- Add GPIO, SNVS and GIC clocks for i.MX8 drivers
- Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
- Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
- Add clks for new Exynos5422 Dynamic Memory Controller driver
- Clock definition for Exynos4412 Mali
- Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
- Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
- TI clock probing done from DT by default instead of firmware
- Fix Amlogic Meson mpll fractional part and spread sprectrum issues
- Add Amlogic meson8 audio clocks
- Add Amlogic g12a temperature sensors clocks
- Add Amlogic g12a and g12b cpu clocks
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
- Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
- Add Clock Domain support on Renesas RZ/N1
-----BEGIN PGP SIGNATURE-----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=mK0C
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This round of clk driver and framework updates is heavy on the driver
update side. The two main highlights in the core framework are the
addition of an bulk clk_get API that handles optional clks and an
extra debugfs file that tells the developer about the current parent
of a clk.
The driver updates are dominated by i.MX in the diffstat, but that is
mostly because that SoC has started converting to the clk_hw style of
clk registration. The next big update is in the Amlogic meson clk
driver that gained some support for audio, cpu, and temperature clks
while fixing some PLL issues. Finally, the biggest thing that stands
out is the conversion of a large part of the Allwinner sunxi-ng driver
to the new clk parent scheme that uses less strings and more pointer
comparisons to match clk parents and children up.
In general, it looks like we have a lot of little fixes and tweaks
here and there to clk data along with the normal addition of a handful
of new drivers and a couple new core framework features.
Core:
- Add a 'clk_parent' file in clk debugfs
- Add a clk_bulk_get_optional() API (with devm too)
New Drivers:
- Support gated clk controller on MIPS based BCM63XX SoCs
- Support SiLabs Si5341 and Si5340 chips
- Support for CPU clks on Raspberry Pi devices
- Audsys clock driver for MediaTek MT8516 SoCs
Updates:
- Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
- Small frequency support for SiLabs Si544 chips
- Slow clk support for AT91 SAM9X60 SoCs
- Remove dead code in various clk drivers (-Wunused)
- Support for Marvell 98DX1135 SoCs
- Get duty cycle of generic pwm clks
- Improvement in mmc phase calculation and cleanup of some rate defintions
- Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
- Add GPIO, SNVS and GIC clocks for i.MX8 drivers
- Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
- Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
- Add clks for new Exynos5422 Dynamic Memory Controller driver
- Clock definition for Exynos4412 Mali
- Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
- Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
- TI clock probing done from DT by default instead of firmware
- Fix Amlogic Meson mpll fractional part and spread sprectrum issues
- Add Amlogic meson8 audio clocks
- Add Amlogic g12a temperature sensors clocks
- Add Amlogic g12a and g12b cpu clocks
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
- Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
- Add Clock Domain support on Renesas RZ/N1"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
clk: consoldiate the __clk_get_hw() declarations
clk: sprd: Add check for return value of sprd_clk_regmap_init()
clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
clk: Add Si5341/Si5340 driver
dt-bindings: clock: Add silabs,si5341
clk: clk-si544: Implement small frequency change support
clk: add BCM63XX gated clock controller driver
devicetree: document the BCM63XX gated clock bindings
clk: at91: sckc: use dedicated functions to unregister clock
clk: at91: sckc: improve error path for sama5d4 sck registration
clk: at91: sckc: remove unnecessary line
clk: at91: sckc: improve error path for sam9x5 sck register
clk: at91: sckc: add support to free slow clock osclillator
clk: at91: sckc: add support to free slow rc oscillator
clk: at91: sckc: add support to free slow oscillator
clk: rockchip: export HDMIPHY clock on rk3228
clk: rockchip: add watchdog pclk on rk3328
clk: rockchip: add clock id for hdmi_phy special clock on rk3228
clk: rockchip: add clock id for watchdog pclk on rk3328
clk: at91: sckc: add support for SAM9X60
...
- Support gated clk controller on MIPS based BCM63XX SoCs
- Small frequency support for SiLabs Si544 chips
- Support SiLabs Si5341 and Si5340 chips
* clk-bcm63xx:
clk: add BCM63XX gated clock controller driver
devicetree: document the BCM63XX gated clock bindings
* clk-silabs:
clk: Add Si5341/Si5340 driver
dt-bindings: clock: Add silabs,si5341
clk: clk-si544: Implement small frequency change support
* clk-lochnagar:
clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
clk: lochnagar: Use new parent_data approach to register clock parents
* clk-rockchip:
clk: rockchip: export HDMIPHY clock on rk3228
clk: rockchip: add watchdog pclk on rk3328
clk: rockchip: add clock id for hdmi_phy special clock on rk3228
clk: rockchip: add clock id for watchdog pclk on rk3328
clk: rockchip: convert pclk_wdt boilerplat to new SGRF_GATE macro
clk: rockchip: add a type from SGRF-controlled gate clocks
clk: rockchip: Remove 48 MHz PLL rate from rk3288
clk: rockchip: add 1.464GHz cpu-clock rate to rk3228
clk: rockchip: Slightly more accurate math in rockchip_mmc_get_phase()
clk: rockchip: Don't yell about bad mmc phases when getting
clk: rockchip: Use clk_hw_get_rate() in MMC phase calculation
Add a driver for the gated clock controller found on MIPS based BCM63XX
SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[sboyd@kernel.org: Remove module.h include and associated things for a
non-modular driver, add static on data tables, drop of_match_ptr()
usage, fix spdx tag to be a C++ style comment]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
As 'clk-raspberrypi' depends on RPi's firmware interface, which might be
configured as a module, the cpu clock might not be available for the
cpufreq driver during it's init process. So we register the
'raspberrypi-cpufreq' platform device after the probe sequence succeeds.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Raspberry Pi's firmware offers an interface though which update it's
clock's frequencies. This is specially useful in order to change the CPU
clock (pllb_arm) which is 'owned' by the firmware and we're unable to
scale using the register interface provided by clk-bcm2835.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Raspberry Pi's firmware controls this pll, we should use the firmware
interface to access it.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation the gpl this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
version 2 gplv2 for more details you should have received a copy of
the gnu general public license version 2 gplv2 along with this
source code
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 16 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081201.771169395@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARCH_BRCMSTB needs to use the BCM2835 clock driver for chips like
BCM7211 which adopted that clock controller, make that possible and the
driver default to be enabled for ARCH_BRCMSTB.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Make the BCM2835 clock driver selectable by other
architectures/platforms. ARCH_BRCMSTB will be selecting that driver in
the next commit since new chips like 7211 use the same CPRMAN clock
controller that this driver supports.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
