Commit Graph

13 Commits

Author SHA1 Message Date
Kuppuswamy Sathyanarayanan
c4949630fe mfd: intel_soc_pmic_bxtwc: Remove thermal second level IRQs
Since all second level thermal IRQs are consumed by the same
device(bxt_wcove_thermal), there is no need to expose them as separate
interrupts. We can just export only the first level IRQs for thermal and
let the device(bxt_wcove_thermal) driver handle the second level IRQs
based on thermal interrupt status register. Also, just using only the
first level IRQ will eliminate the bug involved in requesting only the
second level IRQ and not explicitly enable the first level IRQ. For
more info on this issue please read the details at,

https://lkml.org/lkml/2017/2/27/148

This patch also makes relevant change in bxt_wcove_thermal driver to use
only first level PMIC thermal IRQ.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-06-19 15:44:29 +01:00
Kuppuswamy Sathyanarayanan
4533d8551b mfd: intel_soc_pmic_bxtwc: Fix TMU interrupt index
TMU interrupts are registered as a separate interrupt chip, and
hence it should start its interrupt index(BXTWC_TMU_IRQ) number
from 0. But currently, BXTWC_TMU_IRQ is defined as part of enum
bxtwc_irqs_level2 and its index value is 11. Since this index
value is used when calculating .num_irqs of regmap_irq_chip_tmu,
it incorrectly reports number of IRQs as 12 instead of actual
value of 1.

This patch fixes this issue by creating new enum of tmu IRQs and
resetting its starting index to 0.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-06-19 15:44:10 +01:00
Kuppuswamy Sathyanarayanan
b4ccc4d2e8 mfd: bxtwc: Remove unnecessary i2c_addr checks in ipc calls
In the following code block, BXTWC_DEVICE1_ADDR value is
already fixed and hence there no need to check for
if (!i2c_addr) in every ipc read/write calls. Even if this
check is required it can be moved to probe function.

i2c_addr = BXTWC_DEVICE1_ADDR;
if (!i2c_addr) {
	dev_err(pmic->dev, "I2C address not set\n");
	return -EINVAL;
}

This patch remove this extra check and adds some NULL
parameter checks.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27 09:25:06 +01:00
Andy Shevchenko
0c227c51b9 mfd: intel_soc_pmic_bxtwc: Rename header to follow c-file
For better understanding of relationship between headers and modules
rename:
	intel_bxtwc.h -> intel_soc_pmic_bxtwc.h

While here, remove file name from the file itself.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27 09:25:05 +01:00
Andy Shevchenko
f1e34ad849 mfd: intel_soc_pmic_bxtwc: Move inclusion to c-file
There is no need to include intel_soc_pmic.h into header which doesn't
require it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27 09:25:05 +01:00
Linus Torvalds
ac5a28b0d3 - New Device Support
- Add support for Ricoh RC5T619 PMIC to rn5t618
    - Add support for PM8821 PMIC to qcom-pm8xxx
 
 - New Functionality
    - Add support for GPIO to lpc_ich
    - Add support for GPADC to sun4i
    - Add ability for rk808 to shutdown
 
  - Fix-ups
    - Simplify/strip unnecessary code; tps65218, palmas, tps65217
    - Device Tree binding updates; tps65218, altera-a10sr
    - Provide/export device ID info; tps65218, axp20x-i2c, hi655x-pmic, fsl-imx25-tsadc, intel_soc_pmic_bxtwc
    - Use MFD API instead of of_platform_populate(); tps65218
    - Generalise name-space; pm8xxx
    - Supply/edit regmap configuration; axp20x, cs47l24-tables, axp20x
    - Enable compile testing; max77620,  max77686, exynos-lpass, abx500-core
    - Coding style issues; wm8994-core, wm5102-tables
    - Supply endian support; syscon
    - Remove module support; ab3100-core, ab8500-debugfs, ab8500-gpadc, abx500-core
 
 - Bug Fixes
    - Fix ordering issues; wm8994
    - Fix dependencies (build-time/run-time); exynos_lpass, sun4i-gpadc
    - Fix compiler warnings; sun4i-gpadc
    - Fix leaks; mfd-core
    - Fix page fault during module unload; tps65217
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAlhXxxcACgkQUa+KL4f8
 d2HDnxAAhYdrm6+4jYUDzXpKuKPDO4GNakvXY2aTk8dHobca8ySLcDZZ1s0KLLWa
 iOgOGmVQjL04vraiHiqGYW8kPONeslgFqhhqHmVvMZtLka3ZRXb9BWE6mLa7JBDg
 LONQFfpiDlbBChiuDSqBKYj0p0Wp65uFF/jtJxGTXe+vUTO94Lbrgo6tCmuAgBf/
 k2JS4+/Ufa3QuXuvPm8cVleWhhyEqkWGLJqv5PaDxjNQwP78PzXMYvfOEcCyUpNR
 hUoG2xJl+aPilVr0I9rsWIqgmDgRHlX67oMneoZkMiVQj20+Yi8YojDgGOpcaOZX
 Oh/YpdAEqaZh98EX5dKnuM8NQERltl/fTDpe3JNTPl42QYLMDzyBBb810xNzrB7W
 irJLzmfjEsPH7oYA63/EU3an6yXGXcB1lZ8wTPqFXOpGqw2/3SDSlTjonTxW1nnX
 yUXVV3VUS0xlHg0GHDuCbUvkJQSi2W6x/A/mzL8QBaKO7iUzv0P/oTZIZZe4Y06f
 LUCx4vb6W9i+9Me/z1aieXgXqC842U66OTmz1AmNRcntFspAeR3Rg3wGLP6+L/A+
 51Lumjn1IsHwgyd+/uQ3vsb35W/ZNYxTuc61HbWRPSX984sIdtI2+DL4+c8WBPLw
 MQgTy6ULb5bCt2HQ6DbwMZRpM6hIY2ed/QnJN2q2c3VBA1YgzzQ=
 =Lkoz
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Device Support
   - Add support for Ricoh RC5T619 PMIC to rn5t618
   - Add support for PM8821 PMIC to qcom-pm8xxx

  New Functionality:
   - Add support for GPIO to lpc_ich
   - Add support for GPADC to sun4i
   - Add ability for rk808 to shutdown

  Fix-ups:
   - Simplify/strip unnecessary code; tps65218, palmas, tps65217
   - Device Tree binding updates; tps65218, altera-a10sr
   - Provide/export device ID info; tps65218, axp20x-i2c, hi655x-pmic,
     fsl-imx25-tsadc, intel_soc_pmic_bxtwc
   - Use MFD API instead of of_platform_populate(); tps65218
   - Generalise name-space; pm8xxx
   - Supply/edit regmap configuration; axp20x, cs47l24-tables, axp20x
   - Enable compile testing; max77620, max77686, exynos-lpass,
     abx500-core
   - Coding style issues; wm8994-core, wm5102-tables
   - Supply endian support; syscon
   - Remove module support; ab3100-core, ab8500-debugfs, ab8500-gpadc,
     abx500-core

  Bug Fixes:
   - Fix ordering issues; wm8994
   - Fix dependencies (build-time/run-time); exynos_lpass, sun4i-gpadc
   - Fix compiler warnings; sun4i-gpadc
   - Fix leaks; mfd-core
   - Fix page fault during module unload; tps65217"

* tag 'mfd-for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
  mfd: tps65217: Support an interrupt pin as the system wakeup
  mfd: tps65217: Make an interrupt handler simpler
  mfd: tps65217: Update register interrupt mask bits instead of writing operation
  mfd: tps65217: Specify the IRQ name
  mfd: tps65217: Fix page fault on unloading modules
  mfd: palmas: Remove redundant check in palmas_power_off
  mfd: arizona: Disable IRQs during driver remove
  mfd: pm8xxx: add support to pm8821
  mfd: intel-lpss: Try to enable Memory-Write-Invalidate
  mfd: rn5t618: Add Ricoh RC5T619 PMIC support
  mfd: axp20x: Add address extension registers for AXP806 regmap
  mfd: intel_soc_pmic_bxtwc: Fix a typo in MODULE_DEVICE_TABLE()
  mfd: core: Fix device reference leak in mfd_clone_cell
  mfd: bcm590xx: Simplify a test
  mfd: sun4i-gpadc: Select regmap-irq
  mfd: abx500-core: drop unused MODULE_ tags from non-modular code
  mfd: ab8500: make sysctrl explicitly non-modular
  mfd: ab8500-gpadc: Make it explicitly non-modular
  mfd: ab8500-debugfs: Make it explicitly non-modular
  mfd: ab8500-core: Make it explicitly non-modular
  ...
2016-12-19 08:16:26 -08:00
Linus Torvalds
8421c60446 platform-drivers-x86 for 4.10-2
Move and add registration for the mlx-platform driver. Introduce button and lid
 drivers for the surface3 (different from the surface3-pro). Add BXT PMIC TMU
 support. Add Y700 to existing ideapad-laptop quirk.
 
 ideapad-laptop:
  - Add Y700 15-ACZ to no_hw_rfkill DMI list
 
 surface3_button:
  - Introduce button support for the Surface 3
 
 surface3-wmi:
  - Add custom surface3 platform device for controlling LID
  - Balance locking on error path
 
 mlx-platform:
  - Add mlxcpld-hotplug driver registration
  - Fix semicolon.cocci warnings
  - Move module from arch/x86
 
 platform/x86:
  - Add Whiskey Cove PMIC TMU support
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYVxXxAAoJEKbMaAwKp364mDAIAL750zoO/liY1qfFGktkY2zS
 xknJqh4UeIVW6iN9hEq7jQD3jkFl7hNuXgFyogLZgJQge8gfufsOD7ljkhp2wVF2
 3Ir437f4GdcUeuhO6PwuPZnn++Y6oH2rLZc1d+5anZRikW470tnXitrXs5hsqG57
 74KiSFa+v+Uj1kqU4Gjt0QDSfmQc185Wn5xieHPpZrcjDaut+N4t06+MDMcH7fjk
 6nJ+tvo/dreZojA+AklljaNB2BioIGbEOGamnxOJ9Rjs0jV2d0A1c/6XBHDe+Xtu
 SkWqvjdrLOSxAjErBpB97VYnYihjCDXfl+DIABOdumGO6hJz01DvbZ+VVLwGM0E=
 =YH31
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.10-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull more x86 platform driver updates from Darren Hart:
 "Move and add registration for the mlx-platform driver. Introduce
  button and lid drivers for the surface3 (different from the
  surface3-pro). Add BXT PMIC TMU support. Add Y700 to existing
  ideapad-laptop quirk.

  Summary:

  ideapad-laptop:
   - Add Y700 15-ACZ to no_hw_rfkill DMI list

  surface3_button:
   - Introduce button support for the Surface 3

  surface3-wmi:
   - Add custom surface3 platform device for controlling LID
   - Balance locking on error path

  mlx-platform:
   - Add mlxcpld-hotplug driver registration
   - Fix semicolon.cocci warnings
   - Move module from arch/x86

  platform/x86:
   - Add Whiskey Cove PMIC TMU support"

* tag 'platform-drivers-x86-v4.10-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  platform/x86: surface3-wmi: Balance locking on error path
  platform/x86: Add Whiskey Cove PMIC TMU support
  platform/x86: ideapad-laptop: Add Y700 15-ACZ to no_hw_rfkill DMI list
  platform/x86: Introduce button support for the Surface 3
  platform/x86: Add custom surface3 platform device for controlling LID
  platform/x86: mlx-platform: Add mlxcpld-hotplug driver registration
  platform/x86: mlx-platform: Fix semicolon.cocci warnings
  platform/x86: mlx-platform: Move module from arch/x86
2016-12-18 15:45:33 -08:00
Nilesh Bacchewar
957ae50981 platform/x86: Add Whiskey Cove PMIC TMU support
This adds TMU (Time Management Unit) support for Intel BXT platform.
It enables the alarm wake-up functionality in the TMU unit of Whiskey Cove
PMIC.

Signed-off-by: Nilesh Bacchewar <nilesh.bacchewar@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[andy: resolve merge conflict in Kconfig]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-18 14:56:37 -08:00
Wei Yongjun
f57576e73c mfd: intel_soc_pmic_bxtwc: Fix a typo in MODULE_DEVICE_TABLE()
Fix a typo in MODULE_DEVICE_TABLE(). 'pmic_acpi_ids' should be
'bxtwc_acpi_ids'.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-29 08:21:34 +00:00
Heikki Krogerus
9600702082 mfd: intel_soc_pmic_bxtwc: Fix usbc interrupt
The wcove USB Type-C driver is currently being flooded with
interrupts that are not targeted to it. The reason for that
is because all CHRG first level interrupts are mapped to it.
This fixes the issue by introducing separate irq for the
usbc device, and mapping only USB Type-C PHY interrupts to
it.

Fixes: 9c6235c863 ("mfd: intel_soc_pmic_bxtwc: Add bxt_wcove_usbc device")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-16 09:50:29 +00:00
Bin Gao
9c6235c863 mfd: intel_soc_pmic_bxtwc: Add bxt_wcove_usbc device
The Intel Whiskey Cove PMIC includes several function units, e.g.
ADC, thermal, USB Type-C, GPIO, etc. The corresponding device has
to be created in the mfd driver(intel_soc_pmic_bxtwc.c). This change
adds the USB Type-c device.

Signed-off-by: Bin Gao <bin.gao@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04 15:48:02 +01:00
Dan Carpenter
f3a654c519 mfd: intel_soc_pmic_bxtwc: 64 bit bug in bxtwc_val_store()
The call to kstrtoul() will corrupt memory on 64 bit systems because an
int is 4 bytes and a long is 8.

Also it's not a good idea to let users trigger a dev_err() because it
just ends up flooding /var/log/messages so I removed the printk.

Fixes: 2ddd2086ea9c ('mfd: add Intel Broxton Whiskey Cove PMIC driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30 17:19:47 +00:00
Qipeng Zha
39d047c0b1 mfd: add Intel Broxton Whiskey Cove PMIC driver
Add MFD core driver for Intel Broxton Whiskey Cove PMIC,
which is specially accessed by hardware IPC, not a generic
I2C device

Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30 17:18:50 +00:00