2467 Commits

Author	SHA1	Message	Date
Damien Le Moal	ed3137edb3	dt-bindings: pinctrl: Document canaan,k210-fpioa bindings ... Document the device tree bindings for the Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA) pinctrl driver in Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml. The new header file include/dt-bindings/pinctrl/k210-fpioa.h is added to define all 256 possible pin functions of the SoC IO pins, as well as macros simplifying the definition of pin functions in a device tree. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>	2021-01-14 15:08:52 -08:00
Damien Le Moal	1d7c9d093e	dt-bindings: reset: Document canaan,k210-rst bindings ... Document the device tree bindings for the Canaan Kendryte K210 SoC reset controller driver in Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml. The header file include/dt-bindings/reset/k210-rst.h is added to define all possible reset lines of the SoC. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>	2021-01-14 15:08:51 -08:00
Rafał Miłecki	8285354305	dt-bindings: power: document Broadcom's PMB binding ... Broadcom's PMB is power controller used for disabling and enabling SoC devices. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>	2021-01-12 20:45:57 -08:00
Samuel Holland	0482a4e6de	clk: sunxi-ng: h6-r: Add R_APB2_RSB clock and reset ... While no information about the H6 RSB controller is included in the datasheet or manual, the vendor BSP and power management blob both reference the RSB clock parent and register address. These values were verified by experimentation. Since this clock/reset are added late, the specifier is added at the end to maintain the existing DT binding. The code is kept in register order. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>	2021-01-06 19:34:29 +08:00
Jun Nie	4ec908d210	dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings ... The Qualcomm MSM8939 platform has several bus fabrics that could be controlled and tuned dynamically according to the bandwidth demand. Signed-off-by: Jun Nie <jun.nie@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201204075345.5161-5-jun.nie@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>	2021-01-05 13:10:38 +02:00
Liu Ying	de332bf242	clk: imx: clk-imx8qxp: Add SCU clocks support for DC0 bypass clocks ... This patch adds SCU clocks support for i.MX8qxp DC0 subsystem bypass clocks. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>	2021-01-05 10:55:05 +08:00
Martin Blumenstingl	b8dd6a8ae5	dt-bindings: clock: meson8b: remove non-existing clock macros ... CLKID_UNUSED and CLKID_XTAL aren't valid clocks. Remove them since there are no consumers of this anymore. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201221183624.932649-3-martin.blumenstingl@googlemail.com	2021-01-04 11:43:19 +01:00
Linus Torvalds	8653b778e4	The core framework got some nice improvements this time around. We gained the ... ability to get struct clk pointers from a struct clk_hw so that clk providers can consume the clks they provide, if they need to do something like that. This has been a long missing part of the clk provider API that will help us move away from exposing a struct clk pointer in the struct clk_hw. Tracepoints are added for the clk_set_rate() "range" functions, similar to the tracepoints we already have for clk_set_rate() and we added a column to debugfs to help developers understand the hardware enable state of clks in case firmware or bootloader state is different than what is expected. Overall the core changes are mostly improving the clk driver writing experience. At the driver level, we have the usual collection of driver updates and new drivers for new SoCs. This time around the Qualcomm folks introduced a good handful of clk drivers for various parts of three or four SoCs. The SiFive folks added a new clk driver for their FU740 SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic SoCs had lots of work done after that for various new features. One last thing to note in the driver area is that the i.MX driver has gained a new binding to support SCU clks after being on the list for many months. It uses a two cell binding which is sort of rare in clk DT bindings. Beyond that we have the usual set of driver fixes and tweaks that come from more testing and finding out that some configuration was wrong or that a driver could support being built as a module. Core: - Add some trace points for clk_set_rate() "range" functions - Add hardware enable information to clk_summary debugfs - Replace clk-provider.h with of_clk.h when possible - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw New Drivers: - Bindings for Canaan K210 SoC clks - Support for SiFive FU740 PRCI - Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs Updates: - DVFS support for AT91 clk driver - Update git repo branch for Renesas clock drivers - Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U - Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E - Stop using __raw_*() I/O accessors in Renesas clk drivers - One more conversion of DT bindings to json-schema - Make i.MX clk-gate2 driver more flexible - New two cell binding for i.MX SCU clks - Drop of_match_ptr() in i.MX8 clk drivers - Add arch dependencies for Rockchip clk drivers - Fix i2s on Rockchip rk3066 - Add MIPI DSI clks on Amlogic axg and g12 SoCs - Support modular builds of Amlogic clk drivers - Fix an Amlogic Video PLL clock dependency - Samsung Kconfig dependencies updates for better compile test coverage - Refactoring of the Samsung PLL clocks driver - Small Tegra driver cleanups - Minor fixes to Ingenic and VC5 clk drivers - Cleanup patches to remove unused variables and plug memory leaks -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl/f/ycRHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSXjxg/7BJMFphpZmQb3iy/lZMYfgPh2yxZvrrBj zJ2i1mMru/C3BkXTx29HCJvj6/VC2HgGLL6fzfwe7oY3XVRT1Vxlsvka9vNZSNc2 UYNa8GUwR0mSXDzp5KnzoAQfLwvSqWUIeT8WB+Z+CJ7WIAGWnXgBlqsf/d/mr9hg JoAh+ROpbksL6hs61WJSm+7/Yu6efS0Yj0zzLZOINFWvDIOJ+Rp4g1u+qGH9tZyO I2Bik75Sc8hqvLUP5SVzI/1H4yLB0On+ADgVRwjvrKPVX56alYquOUMsU+sy4SeY ONQBki3vV5gtJHG1qvkwTC5/Yw20eUsrmrc7PNECvb1zo5Tp4QuOAR5nHCb4fg8u n7RRd1MktTAUAQxTzBaNYtix3Q19fjSR44C/1B6lKk6xkN+w4uYLi2GHrADy9rXa SwQVTKTGc8LjGywDaAOXdAyx2FMAtt1OvkTxZ238+aoHw5nQDHWKxu5TwYK6b5jG aEFzTCIEYlzRLqcZyGONSD0WXmQWyoNiPwJ3B7RDRfpg7dPESyKIB4MzGWiX9eDy lri/SoVH08c1sRf8AzIoi+CUNi8geTNAHHlJfiGznrv81ttVf3FioWyWLjr+SmBV rNxn35WxeDWoCZqtrLJlg5skVgmD8BRXLZTI9udPG8u6D7OdWdJBuMZ6EelO+OZg /n4w8tdo3cE= =Wt9O -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework got some nice improvements this time around. We gained the ability to get struct clk pointers from a struct clk_hw so that clk providers can consume the clks they provide, if they need to do something like that. This has been a long missing part of the clk provider API that will help us move away from exposing a struct clk pointer in the struct clk_hw. Tracepoints are added for the clk_set_rate() "range" functions, similar to the tracepoints we already have for clk_set_rate() and we added a column to debugfs to help developers understand the hardware enable state of clks in case firmware or bootloader state is different than what is expected. Overall the core changes are mostly improving the clk driver writing experience. At the driver level, we have the usual collection of driver updates and new drivers for new SoCs. This time around the Qualcomm folks introduced a good handful of clk drivers for various parts of three or four SoCs. The SiFive folks added a new clk driver for their FU740 SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic SoCs had lots of work done after that for various new features. One last thing to note in the driver area is that the i.MX driver has gained a new binding to support SCU clks after being on the list for many months. It uses a two cell binding which is sort of rare in clk DT bindings. Beyond that we have the usual set of driver fixes and tweaks that come from more testing and finding out that some configuration was wrong or that a driver could support being built as a module. Summary: Core: - Add some trace points for clk_set_rate() "range" functions - Add hardware enable information to clk_summary debugfs - Replace clk-provider.h with of_clk.h when possible - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw New Drivers: - Bindings for Canaan K210 SoC clks - Support for SiFive FU740 PRCI - Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs Updates: - DVFS support for AT91 clk driver - Update git repo branch for Renesas clock drivers - Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U - Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E - Stop using __raw_*() I/O accessors in Renesas clk drivers - One more conversion of DT bindings to json-schema - Make i.MX clk-gate2 driver more flexible - New two cell binding for i.MX SCU clks - Drop of_match_ptr() in i.MX8 clk drivers - Add arch dependencies for Rockchip clk drivers - Fix i2s on Rockchip rk3066 - Add MIPI DSI clks on Amlogic axg and g12 SoCs - Support modular builds of Amlogic clk drivers - Fix an Amlogic Video PLL clock dependency - Samsung Kconfig dependencies updates for better compile test coverage - Refactoring of the Samsung PLL clocks driver - Small Tegra driver cleanups - Minor fixes to Ingenic and VC5 clk drivers - Cleanup patches to remove unused variables and plug memory leaks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" clk: ingenic: Fix divider calculation with div tables clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9 clk: si5351: Wait for bit clear after PLL reset clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error ...	2020-12-21 10:39:37 -08:00
Stephen Boyd	abe7e32f1d	Merge branches 'clk-ingenic', 'clk-vc5', 'clk-cleanup', 'clk-canaan' and 'clk-marvell' into clk-next ... - Bindings for Canaan K210 SoC clks * clk-ingenic: clk: ingenic: Fix divider calculation with div tables * clk-vc5: clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" * clk-cleanup: clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: bcm: dvp: Add MODULE_DEVICE_TABLE() clk: bcm: dvp: drop a variable that is assigned to only * clk-canaan: dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix * clk-marvell: clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9	2020-12-20 17:18:05 -08:00
Stephen Boyd	b53a1603b4	Merge branches 'clk-ti', 'clk-analog', 'clk-trace', 'clk-at91' and 'clk-silabs' into clk-next ... - Add some trace points for clk_set_rate() "range" functions - DVFS support for AT91 clk driver * clk-ti: clk: ti: omap5: Fix reboot DPLL lock failure when using ABE TIMERs clk: ti: Fix memleak in ti_fapll_synth_setup * clk-analog: clk: axi-clkgen: move the OF table at the bottom of the file clk: axi-clkgen: wrap limits in a struct and keep copy on the state object dt-bindings: clock: adi,axi-clkgen: convert old binding to yaml format * clk-trace: clk: Trace clk_set_rate() "range" functions * clk-at91: clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error * clk-silabs: clk: si5351: Wait for bit clear after PLL reset	2020-12-20 17:17:51 -08:00
Stephen Boyd	699eda2814	Merge branches 'clk-tegra', 'clk-imx', 'clk-sifive', 'clk-mediatek' and 'clk-summary' into clk-next ... - Support for SiFive FU740 PRCI - Add hardware enable information to clk_summary debugfs * clk-tegra: clk: tegra: Fix duplicated SE clock entry clk: tegra: bpmp: Clamp clock rates on requests clk: tegra: Do not return 0 on failure * clk-imx: (24 commits) clk: imx: scu: remove the calling of device_is_bound clk: imx: scu: Make pd_np with static keyword clk: imx8mq: drop of_match_ptr from of_device_id table clk: imx8mp: drop of_match_ptr from of_device_id table clk: imx8mn: drop of_match_ptr from of_device_id table clk: imx8mm: drop of_match_ptr from of_device_id table clk: imx: gate2: Remove unused variable ret clk: imx: gate2: Add locking in is_enabled op clk: imx: gate2: Add cgr_mask for more flexible number of control bits clk: imx: gate2: Check if clock is enabled against cgr_val clk: imx: gate2: Keep the register writing in on place clk: imx: gate2: Remove the IMX_CLK_GATE2_SINGLE_BIT special case clk: imx: scu: fix build break when compiled as modules clk: imx: remove redundant assignment to pointer np clk: imx: remove unneeded semicolon clk: imx: lpcg: add suspend/resume support clk: imx: clk-imx8qxp-lpcg: add runtime pm support clk: imx: lpcg: allow lpcg clk to take device pointer clk: imx: imx8qxp-lpcg: add parsing clocks from device tree clk: imx: scu: add suspend/resume support ... * clk-sifive: clk: sifive: Add clock enable and disable ops clk: sifive: Fix the wrong bit field shift clk: sifive: Add a driver for the SiFive FU740 PRCI IP block clk: sifive: Use common name for prci configuration clk: sifive: Extract prci core to common base dt-bindings: fu740: prci: add YAML documentation for the FU740 PRCI * clk-mediatek: clk: mediatek: Make mtk_clk_register_mux() a static function * clk-summary: clk: Add hardware-enable column to clk summary	2020-12-20 17:17:37 -08:00
Stephen Boyd	d240d4c205	Merge branches 'clk-amlogic', 'clk-rockchip', 'clk-of', 'clk-freescale' and 'clk-unused' into clk-next ... - Replace clk-provider.h with of_clk.h when possible * clk-amlogic: clk: meson: g12a: add MIPI DSI Host Pixel Clock dt-bindings: clk: g12a-clkc: add DSI Pixel clock bindings clk: meson: enable building as modules clk: meson: Kconfig: fix dependency for G12A clk: meson: axg: add MIPI DSI Host clock clk: meson: axg: add Video Clocks dt-bindings: clk: axg-clkc: add MIPI DSI Host clock binding dt-bindings: clk: axg-clkc: add Video Clocks * clk-rockchip: clk: rockchip: fix i2s gate bits on rk3066 and rk3188 clk: rockchip: add CLK_SET_RATE_PARENT to sclk for rk3066a i2s and uart clocks clk: rockchip: Remove redundant null check before clk_prepare_enable clk: rockchip: Add appropriate arch dependencies * clk-of: xtensa: Replace <linux/clk-provider.h> by <linux/of_clk.h> sh: boards: Replace <linux/clk-provider.h> by <linux/of_clk.h> * clk-freescale: clk: fsl-flexspi: new driver dt-bindings: clock: document the fsl-flexspi-clk device clk: divider: add devm_clk_hw_register_divider_table() clk: qoriq: provide constants for the type clk: fsl-sai: use devm_clk_hw_register_composite_pdata() clk: composite: add devm_clk_hw_register_composite_pdata() clk: fsl-sai: fix memory leak clk: qoriq: Add platform dependencies * clk-unused: clk: scpi: mark scpi_clk_match as maybe unused clk: pwm: drop of_match_ptr from of_device_id table	2020-12-20 17:17:25 -08:00
Damien Le Moal	0c797d2c7e	dt-binding: clock: Document canaan,k210-clk bindings ... Document the device tree bindings of the Canaan Kendryte K210 SoC clock driver in Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml. The header file include/dt-bindings/clock/k210-clk.h is modified to include the complete list of IDs for all clocks of the SoC. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201220085725.19545-3-damien.lemoal@wdc.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-12-20 10:44:37 -08:00
Claudiu Beznea	91f3bf0d53	clk: at91: sama7g5: register cpu clock ... Register CPU clock as being the master clock prescaler. This would be used by DVFS. The block schema of SAMA7G5's PMC contains also a divider between master clock prescaler and CPU (PMC_CPU_RATIO.RATIO) but the frequencies supported by SAMA7G5 could be directly received from CPUPLL + master clock prescaler and the extra divider would do no work in case it would be enabled. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-12-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-12-19 11:50:56 -08:00
Eugen Hristev	3d86ee17d4	dt-bindings: clock: at91: add sama7g5 pll defines ... Add SAMA7G5 specific PLL defines to be referenced in a phandle as a PMC_TYPE_CORE clock. Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> [claudiu.beznea@microchip.com: adapt comit message, adapt sama7g5.c] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-12-19 11:50:55 -08:00
Linus Torvalds	a409ed156a	This is the bulk of the GPIO changes for the v5.11 kernel cycle: ... Core changes: - Retired the old set-up function for GPIO IRQ chips. All chips now use the template struct gpio_irq_chip and pass that to the core to be set up alongside the gpio_chip. We can finally get rid of the old cruft. - Some refactoring and clean up of the core code. - Support edge event timestamps to be stamped using REALTIME (wall clock) timestamps. We have found solid use cases for this, so we support it. New drivers: - MStar MSC313 GPIO driver. - HiSilicon GPIO driver. Driver improvements: - The PCA953x driver now also supports the NXP PCAL9554B/C chips. - The mockup driver can now be probed from the device tree which is pretty useful for virtual prototyping of devices. - The Rcar driver now supports .get_multiple() - The MXC driver dropped some legacy and became a pure device tree client. - The Exar driver was moved over to the IDA interface for enumerating, and also switched over to using regmap for register access. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl/b0r0ACgkQQRCzN7AZ XXPRIQ/+P2VxypIIi8o5ZJLt/UN1CPGbh10WCl9yR95pM7Ekxocsa05MMAyPCbCA SzDSo4wfrbVLd+C8oqGyLcyxR4A8LQDoc/MaBUC60SDr/BY2eu6bRCs9UttWUPUN 59H0r/dMAcSpIXwB9A7dKmF7Ps1Lz9naeZiGV8vw8hmuN4h3RtsWd10h8WDhByoq RA099lNKs6pFpx61hvn+6mr8ewkm6RFh9q9/eg+zU0gVeaXpYLO6zHTnRS3dARIg 9qLZ54mRUAeybpUCi+CpleUM7qQI8wYHB7pJutAXByWVACie91P5youJv2JvMgs3 rvYyjRkHkM+EtpyXStv5zzfIi0JF746zWeeQmrR3bYy7prnIjjkUgIZb2Jmqu0p2 R0PAOmylociuSsEpARIqlGebqMKlmpsekuhJsf8x53le3nM4B2qC6fVEXFfYrp2L sTfxeejmIFBBLLSSbfBFQOk3La9YBURGsidqgA2lQXL1ZSVhV6UrfblyLET6cOgs y4ORYCV4SxeErUhePkA0GXjnu00nC9iD2Too6sTF+oRIirXX3R4SBbgoHKBEhMNe /CWjYduwg7SkqwdeaBpZNU9jpFqq8Rny6nid13FMFORJWAszECzxcBIUaN55S/98 Z8QD0DJNo9nJZdtwT7OYE+x7/QcxgIHClU5MsrXS4yf3SlZHbAk= =nrFU -----END PGP SIGNATURE----- Merge tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of the GPIO changes for the v5.11 kernel cycle: Core changes: - Retired the old set-up function for GPIO IRQ chips. All chips now use the template struct gpio_irq_chip and pass that to the core to be set up alongside the gpio_chip. We can finally get rid of the old cruft. - Some refactoring and clean up of the core code. - Support edge event timestamps to be stamped using REALTIME (wall clock) timestamps. We have found solid use cases for this, so we support it. New drivers: - MStar MSC313 GPIO driver. - HiSilicon GPIO driver. Driver improvements: - The PCA953x driver now also supports the NXP PCAL9554B/C chips. - The mockup driver can now be probed from the device tree which is pretty useful for virtual prototyping of devices. - The Rcar driver now supports .get_multiple() - The MXC driver dropped some legacy and became a pure device tree client. - The Exar driver was moved over to the IDA interface for enumerating, and also switched over to using regmap for register access" * tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits) MAINTAINERS: Remove reference to non-existing file gpio: hisi: Do not require ACPI for COMPILE_TEST MAINTAINERS: Add maintainer for HiSilicon GPIO driver gpio: gpio-hisi: Add HiSilicon GPIO support gpio: cs5535: Simplify the return expression of cs5535_gpio_probe() gpiolib: irq hooks: fix recursion in gpiochip_irq_unmask dt-bindings: mt7621-gpio: convert bindings to YAML format gpiolib: cdev: Flag invalid GPIOs as used gpio: put virtual gpio device into their own submenu drivers: gpio: amd8111: use SPDX-License-Identifier drivers: gpio: amd8111: prefer dev_err()/dev_info() over raw printk drivers: gpio: bt8xx: prefer dev_err()/dev_warn() over of raw printk gpio: Add TODO item for debugfs interface gpio: just plain warning when nonexisting gpio requested tools: gpio: add option to report wall-clock time to gpio-event-mon tools: gpio: add support for reporting realtime event clock to lsgpio gpiolib: cdev: allow edge event timestamps to be configured as REALTIME gpio: msc313: MStar MSC313 GPIO driver dt-bindings: gpio: Binding for MStar MSC313 GPIO controller dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver ...	2020-12-17 18:07:20 -08:00
Linus Torvalds	6daa90439e	dmaengine updates for v5.11-rc1 ... New drivers/devices - Qualcomm ADM driver - Qualcomm GPI driver - Allwinner A100 DMA support - Microchip Sama7g5 support - Mediatek MT8516 apdma - Updates: - more updates to idxd driver and support for IAX config - runtime PM support for dw driver - TI keystone drivers for 5.11 included here due to dependency for TI drivers -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl/bkxEACgkQfBQHDyUj g0dxNA//WzpVy9QJnj6OgXIjM+9sBjqls0iPVfy1JeeMmVW8cgCwLyBNZcssKRye mJ9+VnTx4JQBj4KD2cFBdpr46GvBFbSbcWNSCdm179NtHI4G6tjtynOcWaI9Clu2 0KHoa/EHIj8/jD3Hsbm+WZ1zCoY4VKBXsEq6x1Sj2tpp0/ocDhH4XLAsWTHE9OAD sc+0OtHr1wU4EdV6TKNTT0jXsdtzxOPPsvRsoaKncnR+Mkrgv0FvMBfBLhOb3a+m wUHEkwrEP1pT4Xcew6ZkYs4RYwJI3pllu2gUTs5qtidc723ol/C4kJ27q55N4azb j5buA8AhEwqIDH8qNuV07qaIu2VTdTdbYid3xgAeFygwM1npecZvOf8k6rTjxR/6 XN8jaDuhc2uISY7Gt5c6tOe8rG3ffNhYrmEuGD5HI0hcglpALiE4NcgalaaQS9J1 suQ6AUtCslReD+6M/lfarn9Zd3UAKGbxU8vCNPq0EcSAGUz9u9VK2VwKiGnAZ8bb ED3QDUzZYjTDWpiVodsuJlONgaMLsRCQecZWMDRNpzmf1rCXnkY0eDGiSMz+IiXZ 87IdD66u3d/Mkm6jVdwp6+tKZ/ohj+dtIWKhMd8cKXv5zTzS+4IokxpkxdjBsHPx z+G73IMHjQo8xl/P0IhhwZw+7cBrkntLq8lRSbYxjSTP09QerNE= =uNBn -----END PGP SIGNATURE----- Merge tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "The last dmaengine updates for this year :) This contains couple of new drivers, new device support and updates to bunch of drivers. New drivers/devices: - Qualcomm ADM driver - Qualcomm GPI driver - Allwinner A100 DMA support - Microchip Sama7g5 support - Mediatek MT8516 apdma Updates: - more updates to idxd driver and support for IAX config - runtime PM support for dw driver - TI drivers" * tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits) soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA dmaengine: ti: k3-udma: Initial support for K3 PKTDMA dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling dmaengine: ti: k3-udma: Initial support for K3 BCDMA soc: ti: k3-ringacc: add AM64 DMA rings support. dmaengine: ti: Add support for k3 event routers dmaengine: ti: k3-psil: Add initial map for AM64 dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA dt-bindings: dma: ti: Add document for K3 PKTDMA dt-bindings: dma: ti: Add document for K3 BCDMA dmaengine: dmatest: Use dmaengine_get_dma_device dmaengine: doc: client: Update for dmaengine_get_dma_device() usage dmaengine: Add support for per channel coherency handling dmaengine: of-dma: Add support for optional router configuration callback dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API dmaengine: ti: k3-udma: Add support for second resource range from sysfw dmaengine: ti: k3-udma: Wait for peer teardown completion if supported ...	2020-12-17 12:52:23 -08:00
Linus Torvalds	accefff5b5	ARM: SoC updates for OMAP GenPD ... These are additional updates for the power domain support on OMAP, moving to an implementation based on device tree information instead of SoC specific code. This is the latest step in the ongoing process for moving code out of arch/arm/mach-omap2. I kept this separate from the other driver changes since it touches code in multiple areas. There is one conflict in the dra7.dts file, which adds another node in a different branch. Watch out for adding the trailing '};' both times. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/akk0ACgkQmmx57+YA GNlrvBAAsCH24zvoXDbKVHg+QMbjt2WAWdRCKrJ0kidAI+JACDAGpfOQcoS5wbdF SnU3o5GtjGKfQL3UmiMA2ADIFZFWTLCTimAks/pqQRBgF4Mrh32W2YqAWP206f1U CxsnC6pl7+C/OEoKnVgbYMusvEBp7xaA1mmeNsCudtWg4g6VjKEf232P3AqGguKb ZGmf7g0GHvzd7Euc/71EnO9n35C9lG2d6sJx3GmJejSndEA7LhOruX94+SxUD3mz tVcCPH2HgWOPkmZdDcu7/6lxBnzRLigB+3NXTXktynw0urZOKN5XCy5dd7MiyKEV +R3R0YPa6cIp/K8Wt3v2azPgfXzjbHpGPTX+Ud8rHBE0wvEUYgfvU/2xLSs3rV6N qAmOxDH3W0vdIkQaED1F1JT3YtxYM3D40z2ORp0XqR+AXvA3Yw7NOnfYu+YSMeWA 2FgAGary0QGGyCDC62M7gZiz1mDDU214PK3hxeFGTTNy3DSP6b31MlwQwyeIxL/i rgZBwcM2BKcdmyGk3zXDud9ib4n8/S9gVaaJPbwNPPcCa2m2zUZnSyree3ATLxev 3fqNRnOthtNL7T9aUim+ae/qlbeYmU1v0iSmL+ND7GxpdL54zXRGwzllNQj5h++U 1oRiPeMpt9T47olU5sB1CQZxegq/0qJX5pn4ea9pBtnmN7wqpsM= =0mXx -----END PGP SIGNATURE----- Merge tag 'arm-soc-omap-genpd-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC OMAP GenPD updates from Arnd Bergmann: "These are additional updates for the power domain support on OMAP, moving to an implementation based on device tree information instead of SoC specific code. This is the latest step in the ongoing process for moving code out of arch/arm/mach-omap2. I kept this separate from the other driver changes since it touches code in multiple areas" * tag 'arm-soc-omap-genpd-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits) ARM: OMAP2+: Fix am4 only build after genpd changes ARM: dts: Configure power domain for omap5 dss ARM: dts: omap5: add remaining PRM instances soc: ti: omap-prm: omap5: add genpd support for remaining PRM instances ARM: OMAP2+: Drop legacy platform data for dra7 gpmc ARM: dts: Configure interconnect target module for dra7 iva ARM: dts: dra7: add remaining PRM instances soc: ti: omap-prm: dra7: add genpd support for remaining PRM instances clk: ti: dra7: Drop idlest polling from IVA clkctrl clocks ARM: OMAP2+: Drop legacy platform data for omap4 gpmc ARM: OMAP2+: Drop legacy platform data for omap4 iva ARM: dts: Configure power domain for omap4 dsp ARM: dts: Configure power domain for omap4 dss ARM: dts: omap4: add remaining PRM instances soc: ti: omap-prm: omap4: add genpd support for remaining PRM instances clk: ti: omap4: Drop idlest polling from IVA clkctrl clocks ARM: OMAP2+: Drop legacy remaining legacy platform data for am4 ARM: dts: Use simple-pm-bus for genpd for am4 l3 ARM: dts: Move am4 l3 noc to a separate node ARM: dts: Use simple-pm-bus for genpd for am4 l4_per ...	2020-12-16 16:53:54 -08:00
Linus Torvalds	48c1c40ab4	ARM: SoC drivers for v5.11 ... There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs. There is a trivial conflict in the cedrus driver, with two branches adding the same CEDRUS_CAPABILITY_H265_DEC flag, and another trivial remove/remove conflict in linux/dma-mapping.h. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/alSUACgkQmmx57+YA GNm7GRAAlNMVi7F0f4Ixf1bEh+J2QUonYIpZfrdxOLFwISGQ+nstGrFW2He/OeQv KAi027tZLl6Sdzjy809cLDPA4Z2IKwjVWhEbBHybvy1+irPYjnixtLd0x3YvPhjH iadlcjQ3uaGue8PvubK6CVnBEy82A+Pp29n9i4A4wX/8w+BVIhVsxwQWUBF8pFXE 3La2UZYZMVMvVZMrpTOqwCgdmLDCk+RLMVZ1IiRqBEBq5/DVq03uIXgjGEOrq8tl PXC89w7K510Is891mbBdBThQf+pZkU1vwORuknDcEJKWs9ngbEha7ebVgp32kbFl pi8DEK205d106WQgfn0Zxkpbsp8XD058wDILwkhBcteXlBaUEL6btGVLDTUCJZuv /pkH8tL4lNGpThQFbCEXC8oHZBp2xk55P+SW9RRZOoA5tAp+sz7hlf3y3YKdCSxv 4xybeeVOAgjl01WtbEC7CuIkqcKVSQ7njhLhC8r5ASteNywDThqxLT6nd0VegcQc YH3Eu9QRXpvFwQ35zMkTMWa27bMG5d60fp90bWT0R5amXZpxJJot87w8trFCxv74 mE5KvCbefCRNsTt8GOBA/WR7hVaG369g07qOvs7g4LjJEM3Nl2h/A4/zVFef9O0t yq3Nm4YCGfDSAQXzGR2SJ3nxiqbDknzJTAtZPf4BmbaMuPOIJ5k= =BjJf -----END PGP SIGNATURE----- Merge tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs" * tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits) soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS firmware: xilinx: Properly align function parameter firmware: xilinx: Add a blank line after function declaration firmware: xilinx: Remove additional newline firmware: xilinx: Fix kernel-doc warnings firmware: xlnx-zynqmp: fix compilation warning soc: xilinx: vcu: add missing register NUM_CORE soc: xilinx: vcu: use vcu-settings syscon registers dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding soc: xilinx: vcu: drop useless success message clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe() memory: ti-emif-sram: only build for ARMv7 memory: tegra30: Support interconnect framework memory: tegra20: Support hardware versioning and clean up OPP table initialization dt-bindings: memory: tegra20-emc: Document opp-supported-hw property soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe() reset-controller: ti: force the write operation when assert or deassert ...	2020-12-16 16:38:41 -08:00
Linus Torvalds	9805529ec5	ARM: device tree updates for 5.11 ... Across all platforms, there is a continued move towards DT schema for validating the dts files. As a result there are bug fixes for mistakes that are found using these schema, in addition to warnings from the dtc compiler. As usual, many changes are for adding support for additional on-chip and on-board components in the machines we already support. The newly supported SoCs for this release are: - MStar Infinity2M, a low-end IP camera chip based on a dual-core Cortex-A7, otherwise similar to the Infinity chip we already support. This is also known as the SigmaStar SSD202D, and we add support for the Honestar ssd201htv2 development kit. - Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller (BMC), in the same family as the NPCM750. This gets used in the Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of which are added as well. - Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own Brahma-B53 CPU. Support is also added for the Asus ROG Rapture GT-AC5300 high-end WiFi router based on this chip. - Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores, meant for faster Chromebooks and tablets. It gets added along with its reference design. - Mediatek MT6779 (Helio P90) is a high-end phone chip from last year's generation, also added along with its reference board. This one is still based on Cortex-A75/A55. - Mediatek MT8167 is a version of the already supported MT8516 chip, both based on Cortex-A35. It gets added along with the "Pumpkin" single board computer, but is likely to also make its way into low-end tablets in the future. For the already supported chips, there are a number of new boards. Interestingly there are more 32-bit machines added this time than 64-bit. Here is a brief list of the new boards: - Three new Mikrotik router variants based on Marvell Prestera 98DX3236, a close relative of the more common Armada XP - A reference board for the Marvell Armada 382 - Three new servers using ASpeed baseboard management controllers, the actual machines being from Bytedance, Facebook and IBM, and one machine using the Nuvoton NPCM750 BMC. - The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412. - The usual set of 32-bit i.MX industrial/embedded hardware: * Protonic WD3 (tractor e-cockpit) * Kamstrup OMNIA Flex Concentrator (smart grid platform) * Van der Laan LANMCU (food storage) * Altesco I6P (vehicle inspection stations) * PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard - DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the aleady supported DHCOM module - Three new Allwinner SoC based single-board computers: * NanoPi R1 (H3 based) * FriendlyArm ZeroPi (H3 based) * Elimo Initium SBC (S3 based) - Ouya Game Console based on Nvidia Tegra 3 - Version 5 of the already supported Zynq Z-Turn MYIR Board - LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which is a repackaged 16-core LX2160A - A series of Kontron i.MX8M Mini baseboard/SoM versions - Espressobin Ultra, a new variant of the popular Armada 3700 based board, - IEI Puzzle-M801, a rackmount network appliance based on Marvell Armada 8040 - Microsoft Lumia 950 XL, a phone - HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and sm8150, respectively - Three new board variants of the "Trogdor" Chromebook (sc7180) - New board variants of the Renesas based "Kingfisher" and "HiHope" reference boards - Kobol Helios64, an open source NAS appliance based on Rockchips RK3399 - Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few carrier boards. There is one conflict in mt6577_auxadc.txt, which got replaced in another tree and modified here, the modification is already part of the new file. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/ak/EACgkQmmx57+YA GNmQwRAAtw5Z0qYI3vewX2CPUaHUWEeN50gRa63tR+AALqR5e+M+IbAttgOwlLDB jmsiLRYXgYeS+nTCqxWX3O/KtDH+Ua3GfPoXch5Wt4k7jGV8XtHsWqltl9qxGmO7 pQSoafJa55S7iXX7j4PMWc2el07zjYAejyzVHz7sD+9ARPaG0cL8IuAWLqAirTSt b9FhK2g7e/uUx2Jp5Cx/Ck4kZe27bTlpbhhcJMdypsw6ouue0wfq9gs68dQ6dAq5 /KyX8PNsjX/WCcgm6YhgOwqmEk73pc17dym2SVxi+jL/HFIyQyViOpFuPc20cCWv 9QirMsBw2Rw0yLHsIuHeeRl1KEn47vdfgP5A6e+BggpPjmtF0/S0kHR8yXWFyHfy OUdS8W5OM3rlEUgGESaszh7P2kril8tMdw0212rAyTpyLPVRoKR7NtOo79WBclKq L/2RPJNIQSotQuezhMpjH5zKgx6yOfATBZAEX0MiSU+jAEw/0Od5QCdhwu70bIAF jHfjtqMGS50P/i1Ht0DpwOF9DvClAlKHvUKs3a7hK81MP2sOAaElpAP3iHwVPzsI JU6Vn3AxnIfAsHdGh/FYwq7nxL9aVLCULUOeuLhwTbdAedXLkfFQDMIe1i8zgDtH MpIrE4Un7kmkOxRG96v8f0IYu54OdQdudonravimpYD3uqRfxUQ= =R47r -----END PGP SIGNATURE----- Merge tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM device tree updates from Arnd Bergmann: "Across all platforms, there is a continued move towards DT schema for validating the dts files. As a result there are bug fixes for mistakes that are found using these schema, in addition to warnings from the dtc compiler. As usual, many changes are for adding support for additional on-chip and on-board components in the machines we already support. The newly supported SoCs for this release are: - MStar Infinity2M, a low-end IP camera chip based on a dual-core Cortex-A7, otherwise similar to the Infinity chip we already support. This is also known as the SigmaStar SSD202D, and we add support for the Honestar ssd201htv2 development kit. - Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller (BMC), in the same family as the NPCM750. This gets used in the Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of which are added as well. - Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own Brahma-B53 CPU. Support is also added for the Asus ROG Rapture GT-AC5300 high-end WiFi router based on this chip. - Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores, meant for faster Chromebooks and tablets. It gets added along with its reference design. - Mediatek MT6779 (Helio P90) is a high-end phone chip from last year's generation, also added along with its reference board. This one is still based on Cortex-A75/A55. - Mediatek MT8167 is a version of the already supported MT8516 chip, both based on Cortex-A35. It gets added along with the "Pumpkin" single board computer, but is likely to also make its way into low-end tablets in the future. For the already supported chips, there are a number of new boards. Interestingly there are more 32-bit machines added this time than 64-bit. Here is a brief list of the new boards: - Three new Mikrotik router variants based on Marvell Prestera 98DX3236, a close relative of the more common Armada XP - A reference board for the Marvell Armada 382 - Three new servers using ASpeed baseboard management controllers, the actual machines being from Bytedance, Facebook and IBM, and one machine using the Nuvoton NPCM750 BMC. - The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412. - The usual set of 32-bit i.MX industrial/embedded hardware: * Protonic WD3 (tractor e-cockpit) * Kamstrup OMNIA Flex Concentrator (smart grid platform) * Van der Laan LANMCU (food storage) * Altesco I6P (vehicle inspection stations) * PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard - DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the aleady supported DHCOM module - Three new Allwinner SoC based single-board computers: * NanoPi R1 (H3 based) * FriendlyArm ZeroPi (H3 based) * Elimo Initium SBC (S3 based) - Ouya Game Console based on Nvidia Tegra 3 - Version 5 of the already supported Zynq Z-Turn MYIR Board - LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which is a repackaged 16-core LX2160A - A series of Kontron i.MX8M Mini baseboard/SoM versions - Espressobin Ultra, a new variant of the popular Armada 3700 based board, - IEI Puzzle-M801, a rackmount network appliance based on Marvell Armada 8040 - Microsoft Lumia 950 XL, a phone - HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and sm8150, respectively - Three new board variants of the "Trogdor" Chromebook (sc7180) - New board variants of the Renesas based "Kingfisher" and "HiHope" reference boards - Kobol Helios64, an open source NAS appliance based on Rockchips RK3399 - Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few carrier boards" * tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits) arm64: dts: sparx5: Add SGPIO devices arm64: dts: sparx5: Add reset support dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver ARM: mstar: SMP support ARM: mstar: Wire up smpctrl for SSD201/SSD202D ARM: mstar: Add smp ctrl registers to infinity2m dtsi ARM: mstar: Add dts for Honestar ssd201htv2 ARM: mstar: Add chip level dtsi for SSD202D ARM: mstar: Add common dtsi for SSD201/SSD202D ARM: mstar: Add infinity2m support dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards dt-bindings: vendor-prefixes: Add honestar vendor prefix dt-bindings: mstar: Add binding details for mstar,smpctrl ARM: mstar: Fill in GPIO controller properties for infinity ARM: mstar: Add gpio controller to MStar base dtsi ARM: zynq: Fix incorrect reference to XM013 instead of XM011 ARM: zynq: Convert at25 binding to new description on zc770-xm013 ARM: zynq: Fix OCM mapping to be aligned with binding on zc702 ARM: zynq: Fix leds subnode name for zc702/zybo-z7 ARM: zynq: Rename bus to be align with simple-bus yaml ...	2020-12-16 16:27:35 -08:00
Zong Li	efc91ae43c	clk: sifive: Add a driver for the SiFive FU740 PRCI IP block ... Add driver code for the SiFive FU740 PRCI IP block. This IP block handles reset and clock control for the SiFive FU740 device and implements SoC-level clock tree controls and dividers. The link of unmatched as follow, and the U740-C000 manual would be present in the same page as soon. https://www.sifive.com/boards/hifive-unmatched This driver contains bug fixes and contributions from Henry Styles <hes@sifive.com> Erik Danie <erik.danie@sifive.com> Pragnesh Patel <pragnesh.patel@sifive.com> Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Henry Styles <hes@sifive.com> Cc: Erik Danie <erik.danie@sifive.com> Cc: Pragnesh Patel <pragnesh.patel@sifive.com> Link: https://lore.kernel.org/r/20201209094916.17383-4-zong.li@sifive.com [sboyd@kernel.org: Include header to silence sparse] Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-12-16 12:22:59 -08:00
Linus Torvalds	8312f41f08	MIPS updates for v5.11: ... - enabled GCOV - reworked setup of protection map - added support for more MSCC platforms - added sysfs boardinfo for Loongson64 - enabled KASLR for Loogson64 - added reset controller for BCM63xx - cleanups and fixes -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAl/Z6RIaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHBYtw//bKd5RI/wRgkejish0zX7 Qt6tcnPAZRPFopq/VyepNekgleM5uR8wKJ2YzBYDvyjGL2l217WTvqZG6lTLhLI6 3YJ2xDEi7g5FmecZNF4648iGJBVLu78om2SF5HtXeJaNR1L2ofnCvP+La2y5194M 4J1dxR+V8TZ61ufTEqn3KT+cUet+EAwLsPKqdk6ThlqkDfItjbVUkWG/Hc0hMu2C pyvnto0cvNDYZE1PNeOjhitWnSeuGX2KOSF3hYaPPEGh8V6tqtR1JTGKIJlN92iH LCFC7fLTt/ju12/OAnLbGqM1gpoMP7lsflbQAeNZzaBhtDZ7seq+6iXajimosQMj Vxd3+ur+3+zd/I03uKk2Tcp9Z/m6wv9tux7Rr6J8rQ/6/VCQK1btXbv30ayyYn04 pOqK0XJigyRjlp8SwDgD2uCg7iYQI10toliIipo4TvErKOVSNl/VsyedryCq64Il 6Rj6vntAp/m5s2I3hKEmCZikWC5YalsfkLFRnzKma3vc8Q8+lwWQoEoFb19V/F3E KGkjdoZhsfcGH3kHiqBc342G+9va54c8dgOKcfx0CA6NJwhogI+i4tza2ZdRMPxn Yo7VvuXYISppFYUujW5oT1m5JyPFmVRBCBAyf9kUdPQ5H8QJ0V3gXdtQuUd/NV5J OuVQljUNXTQRxqRFDIdHfXI= =0Sht -----END PGP SIGNATURE----- Merge tag 'mips_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - enable GCOV - rework setup of protection map - add support for more MSCC platforms - add sysfs boardinfo for Loongson64 - enable KASLR for Loogson64 - add reset controller for BCM63xx - cleanups and fixes * tag 'mips_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (70 commits) mips: fix Section mismatch in reference MAINTAINERS: Add linux-mips mailing list to JZ47xx entries MAINTAINERS: Remove JZ4780 DMA driver entry MAINTAINERS: chenhc@lemote.com -> chenhuacai@kernel.org MIPS: Octeon: irq: Alloc desc before configuring IRQ MIPS: mm: Add back define for PAGE_SHARED MIPS: Select ARCH_KEEP_MEMBLOCK if DEBUG_KERNEL to enable sysfs memblock debug mips: lib: uncached: fix non-standard usage of variable 'sp' MIPS: DTS: img: Fix schema warnings for pwm-leds MIPS: KASLR: Avoid endless loop in sync_icache if synci_step is zero MIPS: Move memblock_dump_all() to the end of setup_arch() MIPS: SMP-CPS: Add support for irq migration when CPU offline MIPS: OCTEON: Don't add kernel sections into memblock allocator MIPS: Don't round up kernel sections size for memblock_add() MIPS: Enable GCOV MIPS: configs: drop unused BACKLIGHT_GENERIC option MIPS: Loongson64: Fix up reserving kernel memory range MIPS: mm: Remove unused is_aligned_hugepage_range MIPS: No need to check CPU 0 in {loongson3,bmips,octeon}_cpu_disable() mips: cdmm: fix use-after-free in mips_cdmm_bus_discover ...	2020-12-16 12:07:54 -08:00
Linus Torvalds	2dda5700ef	regulator: Updates for v5.11 ... This has been a quiet release for the regulator API, a few new drivers and the usual fixes and cleanup traffic but not much else going on: - Optimisations for the handling of voltage enumeration, especially with sparse selector sets, from Claudiu Beznea. - Support for several ARM SCMI regulators, Dialog DA9121, NXP PF8x00, Qualcomm PMX55, PM8350 and PM8350c The addition of the SCMI regulator driver (which controls regulators via system firmware) means that we've pulled in the support for the underlying firmware operations from the firmware tree. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/Xd00ACgkQJNaLcl1U h9DStgf+JpvomwCLInmIr1GCLbdhYaxmm8YSuMRqbl4cmRq/D/1cyCUJ7nRsSfsT CcKvFwhH1DwQaMeZJbIilItlM70E7S3lcjUpUZvc0kiBfdSLyNKvpSTnu3olgzJO L7WQYil1Kj/VSNJjx4WmB9YN+zooV1kcRiBS+3JBnlSac4HTLBtiGCFzHGbU+HSo D3CN5XdBaHToZhGuOJLvs7rqFr9uErB9kmZ/u/2kByQwiEekxP3s9TjfF5zrPYmM X9Sg8v44crS6noehzst42GpqJ3TgQzCgIACgHjx2f5ISqApmgF2WK3Tik4NYj4Jm RFPjJdzTV2ik1LuMsE3aihJ6h3PBYQ== =Q5YC -----END PGP SIGNATURE----- Merge tag 'regulator-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This has been a quiet release for the regulator API, a few new drivers and the usual fixes and cleanup traffic but not much else going on: - Optimisations for the handling of voltage enumeration, especially with sparse selector sets, from Claudiu Beznea. - Support for several ARM SCMI regulators, Dialog DA9121, NXP PF8x00, Qualcomm PMX55, PM8350 and PM8350c The addition of the SCMI regulator driver (which controls regulators via system firmware) means that we've pulled in the support for the underlying firmware operations from the firmware tree" * tag 'regulator-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (53 commits) regulator: mc13892-regulator: convert comma to semicolon regulator: pfuze100: Convert the driver to DT-only regulator: max14577: Add proper module aliases strings regulator: da9121: Potential Oops in da9121_assign_chip_model() regulator: da9121: Fix index used for DT property regulator: da9121: Remove uninitialised string variable regulator: axp20x: Fix DLDO2 voltage control register mask for AXP22x regulator: qcom-rpmh: Add support for PM8350/PM8350c regulator: dt-bindings: Add PM8350x compatibles regulator: da9121: include linux/gpio/consumer.h regulator: da9121: Mark some symbols with static keyword regulator: da9121: Request IRQ directly and free in release function to avoid masking race regulator: da9121: add interrupt support regulator: da9121: add mode support regulator: da9121: add current support regulator: da9121: Update registration to support multiple buck variants regulator: da9121: Add support for device variants via devicetree regulator: da9121: Add device variant descriptors regulator: da9121: Add device variant regmaps regulator: da9121: Add device variants ...	2020-12-15 15:48:30 -08:00
Linus Torvalds	0cee54c890	USB / Thunderbolt patches for 5.11-rc1 ... Here is the big USB and thunderbolt pull request for 5.11-rc1. Nothing major in here, just the grind of constant development to support new hardware and fix old issues: - thunderbolt updates for new USB4 hardware - cdns3 major driver updates - lots of typec updates and additions as more hardware is available - usb serial driver updates and fixes - other tiny USB driver updates All have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX9iKFQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yme2gCfacEYztlnc0fh7PyyatYXgdkspbYAn2ri6mfF 4VY86HYXKqQRDW8w/lSg =f8KJ -----END PGP SIGNATURE----- Merge tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big USB and thunderbolt pull request for 5.11-rc1. Nothing major in here, just the grind of constant development to support new hardware and fix old issues: - thunderbolt updates for new USB4 hardware - cdns3 major driver updates - lots of typec updates and additions as more hardware is available - usb serial driver updates and fixes - other tiny USB driver updates All have been in linux-next with no reported issues" * tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: phy: convert comma to semicolon usb: ucsi: convert comma to semicolon usb: typec: tcpm: convert comma to semicolon usb: typec: tcpm: Update vbus_vsafe0v on init usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled usb: typec: Add class for plug alt mode device USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP USB: typec: tcpm: Fix PR_SWAP error handling USB: typec: tcpm: Hard Reset after not receiving a Request USB: gadget: f_fs: remove likely/unlikely usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus USB: gadget: f_midi: setup SuperSpeed Plus descriptors USB: gadget: f_acm: add support for SuperSpeed Plus USB: gadget: f_rndis: fix bitrate for SuperSpeed and above usb: typec: intel_pmc_mux: Configure cable generation value for USB4 MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data() usb: chipidea: usbmisc_imx: Use of_device_get_match_data() usb: cdns3: fix NULL pointer dereference on no platform data ...	2020-12-15 13:54:56 -08:00
Linus Torvalds	c367caf1a3	sound updates for 5.11-rc1 ... Lots of changes (slightly more code increase than usual) at this time, while most of code changes are ASoC driver-specific. Here goes some highlight: Core: * The new auxiliary bus implementation for Intel DSP, which will be used by other drivers as well * Lots of ASoC core cleanups and refactoring * UBSAN and KCSAN fixes in rawmidi, sequencer and a few others * Compress-offload API enhancement for the pause during draining HD- and USB-audio: * Enhancements of the USB-audio implicit feedback support, including better full-duplex operations * Continued CA0132 improvements and fixes * A few new quirk entries, HDMI audio fixes ASoC: * Support for boot time selection of Intel DSP firmware, which should help distros/users testing new stuff more easily; the kconfig was moved to boot time option, too * Some basic DPCM support in audio graph card * Removal of old pre-DT Freescale drivers * Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715, Qualcomm SM8250 and simple GPIO based muxes -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl/YhGcOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE8O1RAAhuRnJZXDXOPXIG9OchsYlHI3wK4eaSiyNe+i sI5yoAdLFYBxBY3OQ4kQCvhjzlLziUvfIfv5YZZMGGAxx9rxsb73F1zH4ttFi1qA 6ipbhk7SVgK3AQk74lWB2JRYrdBko8Y3z9HKNVqaXWnTubyV4EinoC4hzNLuNDI9 JsgyrsCL5Bzl9rlD3vs5mwPwIfiD4hw1KKSQa9f1qnOtXCcbRtL3T4iZZsF5sIph veKrS0R1MZmXpMQoyhyMnTls1GvmW5N3mhIgw9rR1PgeVof8q8klKd2WfroKKz6s Dek3IrgPXfvTdr2ZjNxI29x4NItIayGkbe1DFLZcHQ08yn9JrP9EKQ3Gnv7S9pVT 2gIdSOZV4XYA4OF04ubNU1Ve0n5kP4pX/LvN+cuSgyfgCE+V6HsvTF5nVyrunrM/ 0bdjdWrc1dkb59GuLGOxI0M68lou7J14ZjCzeevuuQm9dNN5x62LDf3+0vDTFBEs t9DaqoqUMZKFfaMLWG8UK04kvw3rhAHap+tQ9HOpz86VK6Qy54RBSfv43p2UK1SO TDHRYIQxQ1GfPlHEy6XFfKOPw15VPDMJWoMPzFfoB+C6dzNKKSAgivFPnERsw88X 9T81MeLhCqqTdRLlZPnGM3S6L1btZhkZcLvyusT0WGGVg8KLgSmn4OwY2wITDebM zIUgHTM= =j9El -----END PGP SIGNATURE----- Merge tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Lots of changes (slightly more code increase than usual) at this time, while most of code changes are ASoC driver-specific. Here are some highlights: Core: - The new auxiliary bus implementation for Intel DSP, which will be used by other drivers as well - Lots of ASoC core cleanups and refactoring - UBSAN and KCSAN fixes in rawmidi, sequencer and a few others - Compress-offload API enhancement for the pause during draining HD- and USB-audio: - Enhancements of the USB-audio implicit feedback support, including better full-duplex operations - Continued CA0132 improvements and fixes - A few new quirk entries, HDMI audio fixes ASoC: - Support for boot time selection of Intel DSP firmware, which should help distros/users testing new stuff more easily; the kconfig was moved to boot time option, too - Some basic DPCM support in audio graph card - Removal of old pre-DT Freescale drivers - Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715, Qualcomm SM8250 and simple GPIO based muxes" * tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (445 commits) ALSA: pcm: oss: Fix potential out-of-bounds shift ALSA: usb-audio: Fix potential out-of-bounds shift ALSA: hda/ca0132 - Add ZxR surround DAC setup. ALSA: hda/ca0132 - Add 8051 PLL write helper functions. ALSA: hda/hdmi: packet buffer index must be set before reading value ASoC: SOF: imx: update kernel-doc description ASoC: mediatek: mt8183: delete some unreachable code ASoC: mediatek: mt8183: add PM ops to machine drivers ASoC: topology: Fix wrong size check ASoC: topology: Add missing size check ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err ASoC: SOF: modify the SOF_DBG flags ASoC: SOF: Intel: hda: remove duplicated status dump ASoC: rt1015p: delay 300ms after SDB pulling high for calibration ASoC: rt1015p: move SDB control from trigger to DAPM ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control() ALSA: usb-audio: Fix control 'access overflow' errors from chmap ALSA: hda/hdmi: always print pin NIDs as hexadecimal ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button ALSA: hda/ca0132 - Remove now unnecessary DSP setup functions. ...	2020-12-15 13:43:47 -08:00
Linus Torvalds	d635a69dd4	Networking updates for 5.11 ... Core: - support "prefer busy polling" NAPI operation mode, where we defer softirq for some time expecting applications to periodically busy poll - AF_XDP: improve efficiency by more batching and hindering the adjacency cache prefetcher - af_packet: make packet_fanout.arr size configurable up to 64K - tcp: optimize TCP zero copy receive in presence of partial or unaligned reads making zero copy a performance win for much smaller messages - XDP: add bulk APIs for returning / freeing frames - sched: support fragmenting IP packets as they come out of conntrack - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs BPF: - BPF switch from crude rlimit-based to memcg-based memory accounting - BPF type format information for kernel modules and related tracing enhancements - BPF implement task local storage for BPF LSM - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage Protocols: - mptcp: improve multiple xmit streams support, memory accounting and many smaller improvements - TLS: support CHACHA20-POLY1305 cipher - seg6: add support for SRv6 End.DT4/DT6 behavior - sctp: Implement RFC 6951: UDP Encapsulation of SCTP - ppp_generic: add ability to bridge channels directly - bridge: Connectivity Fault Management (CFM) support as is defined in IEEE 802.1Q section 12.14. Drivers: - mlx5: make use of the new auxiliary bus to organize the driver internals - mlx5: more accurate port TX timestamping support - mlxsw: - improve the efficiency of offloaded next hop updates by using the new nexthop object API - support blackhole nexthops - support IEEE 802.1ad (Q-in-Q) bridging - rtw88: major bluetooth co-existance improvements - iwlwifi: support new 6 GHz frequency band - ath11k: Fast Initial Link Setup (FILS) - mt7915: dual band concurrent (DBDC) support - net: ipa: add basic support for IPA v4.5 Refactor: - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior - phy: add support for shared interrupts; get rid of multiple driver APIs and have the drivers write a full IRQ handler, slight growth of driver code should be compensated by the simpler API which also allows shared IRQs - add common code for handling netdev per-cpu counters - move TX packet re-allocation from Ethernet switch tag drivers to a central place - improve efficiency and rename nla_strlcpy - number of W=1 warning cleanups as we now catch those in a patchwork build bot Old code removal: - wan: delete the DLCI / SDLA drivers - wimax: move to staging - wifi: remove old WDS wifi bridging support Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl/YXmUACgkQMUZtbf5S IrvSQBAAgOrt4EFopEvVqlTHZbqI45IEqgtXS+YWmlgnjZCgshyMj8q1yK1zzane qYxr/NNJ9kV3FdtaynmmHPgEEEfR5kJ/D3B2BsxYDkaDDrD0vbNsBGw+L+/Gbhxl N/5l/9FjLyLY1D+EErknuwR5XGuQ6BSDVaKQMhYOiK2hgdnAAI4hszo8Chf6wdD0 XDBslQ7vpD/05r+eMj0IkS5dSAoGOIFXUxhJ5dqrDbRHiKsIyWqA3PLbYemfAhxI s2XckjfmSgGE3FKL8PSFu+EcfHbJQQjLcULJUnqgVcdwEEtRuE9ggEi52nZRXMWM 4e8sQJAR9Fx7pZy0G1xfS149j6iPU5LjRlU9TNSpVABz14Vvvo3gEL6gyIdsz+xh hMN7UBdp0FEaP028CXoIYpaBesvQqj0BSndmee8qsYAtN6j+QKcM2AOSr7JN1uMH C/86EDoGAATiEQIVWJvnX5MPmlAoblyLA+RuVhmxkIBx2InGXkFmWqRkXT5l4jtk LVl8/TArR4alSQqLXictXCjYlCm9j5N4zFFtEVasSYi7/ZoPfgRNWT+lJ2R8Y+Zv +htzGaFuyj6RJTVeFQMrkl3whAtBamo2a0kwg45NnxmmXcspN6kJX1WOIy82+MhD Yht7uplSs7MGKA78q/CDU0XBeGjpABUvmplUQBIfrR/jKLW2730= =GXs1 -----END PGP SIGNATURE----- Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - support "prefer busy polling" NAPI operation mode, where we defer softirq for some time expecting applications to periodically busy poll - AF_XDP: improve efficiency by more batching and hindering the adjacency cache prefetcher - af_packet: make packet_fanout.arr size configurable up to 64K - tcp: optimize TCP zero copy receive in presence of partial or unaligned reads making zero copy a performance win for much smaller messages - XDP: add bulk APIs for returning / freeing frames - sched: support fragmenting IP packets as they come out of conntrack - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs BPF: - BPF switch from crude rlimit-based to memcg-based memory accounting - BPF type format information for kernel modules and related tracing enhancements - BPF implement task local storage for BPF LSM - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage Protocols: - mptcp: improve multiple xmit streams support, memory accounting and many smaller improvements - TLS: support CHACHA20-POLY1305 cipher - seg6: add support for SRv6 End.DT4/DT6 behavior - sctp: Implement RFC 6951: UDP Encapsulation of SCTP - ppp_generic: add ability to bridge channels directly - bridge: Connectivity Fault Management (CFM) support as is defined in IEEE 802.1Q section 12.14. Drivers: - mlx5: make use of the new auxiliary bus to organize the driver internals - mlx5: more accurate port TX timestamping support - mlxsw: - improve the efficiency of offloaded next hop updates by using the new nexthop object API - support blackhole nexthops - support IEEE 802.1ad (Q-in-Q) bridging - rtw88: major bluetooth co-existance improvements - iwlwifi: support new 6 GHz frequency band - ath11k: Fast Initial Link Setup (FILS) - mt7915: dual band concurrent (DBDC) support - net: ipa: add basic support for IPA v4.5 Refactor: - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior - phy: add support for shared interrupts; get rid of multiple driver APIs and have the drivers write a full IRQ handler, slight growth of driver code should be compensated by the simpler API which also allows shared IRQs - add common code for handling netdev per-cpu counters - move TX packet re-allocation from Ethernet switch tag drivers to a central place - improve efficiency and rename nla_strlcpy - number of W=1 warning cleanups as we now catch those in a patchwork build bot Old code removal: - wan: delete the DLCI / SDLA drivers - wimax: move to staging - wifi: remove old WDS wifi bridging support" * tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits) net: hns3: fix expression that is currently always true net: fix proc_fs init handling in af_packet and tls nfc: pn533: convert comma to semicolon af_vsock: Assign the vsock transport considering the vsock address flags af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path vsock_addr: Check for supported flag values vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag vm_sockets: Add flags field in the vsock address data structure net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context nfc: s3fwrn5: Release the nfc firmware net: vxget: clean up sparse warnings mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3 mlxsw: spectrum_router_xm: Introduce basic XM cache flushing mlxsw: reg: Add Router LPM Cache Enable Register mlxsw: reg: Add Router LPM Cache ML Delete Register mlxsw: spectrum_router_xm: Implement L-value tracking for M-index mlxsw: reg: Add XM Router M Table Register ...	2020-12-15 13:22:29 -08:00
Vinod Koul	f7b36cc19e	clk: qcom: rpmh: add support for SM8350 rpmh clocks ... This adds the RPMH clocks present in SM8350 SoC Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201208064702.3654324-3-vkoul@kernel.org [sboyd@kernel.org: Move sdx55 to the right place] Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-12-10 12:47:11 -08:00
Daniel Palmer	2bf39ddd77	dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver ... Header adds defines for the gpio number of each pad from the driver view. The gpio block seems to have enough registers for 128 lines but what line is mapped to a physical pin depends on the chip. The gpio block also seems to contain some registers that are not related to gpio but needed somewhere to go. Because of the above the driver itself uses the index of a pin's offset in an array of the possible offsets for a chip as the gpio number. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2020-12-09 22:21:11 +01:00
Arnd Bergmann	a97d8ffac8	Merge tag 'qcom-drivers-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers ... Qualcomm driver updates for v5.11 This adds support for the core power domains on MSM8916, MSM8939, SDM660 and SDX55. It adds SM8150 support to the last-level cache controller driver and it makes it possible to build the Command DB and RPMh drivers as modules. It also contains a slew of smaller cleanups, style and bug fixes throughout the various drivers. * tag 'qcom-drivers-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (39 commits) soc: qcom: rpmhpd: Add SDX55 power domains dt-bindings: power: Add rpm power domain bindings for sdx55 soc: qcom: rpmh: Use __fill_rpmh_msg API during rpmh_write() samples: qmi: Constify static qmi ops soc: qcom: pdr: Constify static qmi structs soc: qcom: initialize local variable soc: qcom: socinfo: add soc ids for msm8953 variants soc: qcom: geni: Remove "iova" check soc: qcom: llcc: Add configuration data for SM8150 dt-bindings: msm: Add LLCC for SM8150 soc: qcom: rpmh: Fix possible doc-rot in rpmh_write()'s header soc: qcom: kryo-l2-accessors: Fix misnaming of 'val' soc: qcom: rpmhpd: Provide some missing struct member descriptions soc: qcom: llcc-qcom: Fix expected kernel-doc formatting soc: qcom: smp2p: Remove unused struct attribute provide another soc: qcom: wcnss_ctrl: Demote non-conformant struct header and fix function headers soc: qcom: smsm: Fix some kernel-doc formatting and naming problems soc: qcom: smem: Fix formatting and missing documentation issues soc: qcom: qcom-geni-se: Fix misnamed function parameter 'rx_rfr' soc: qcom: qcom_aoss: Add missing description for 'cooling_devs' ... Link: https://lore.kernel.org/r/20201130190142.345246-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2020-12-09 00:39:52 +01:00
Arnd Bergmann	3eaac3aed2	i.MX DT bindings update for 5.11: ... - Quite some patches that update vendor-prefixes.yaml and fsl.yaml to document missing board compatibles and add new board compatibles. - A couple of patches from Dong Aisheng to update imx-scu firmware and imx-lpcg clock bindings for new SCU two cells clock support. - A couple of net bindings update from Ioana Ciornei to complete the MAC/PCS/PHY representation on DPAA2 devices. - Document watchdog compatibles for all i.MX and Layerscape devices. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl/HlOYUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM4yegf/eP6henuph6c+Ay/y7Ia4V51UY4ot Sb9pJatgaX4GmFowfztltd//gJMtpHnYbqAsXhk2hkRZ7h0hFIIji2Dp7knq3naD rQykAmT4eWy1CuQFq86XvFaqHc5AVuygBpMmP6nSFDBzBeqDRQ+q813aUpQdUlUH iAeN2Ov62U+4kEc0AxF2mNNcGW1/ikKcFT5nJmJGmgUKuwSUSJ0l09MvXHhQeEjr //gswg/5XU4tweEjAHeEJKM60XLtRFdmoLnz/0nDlLY0BXfBYRpicvNXzxDWEPOd qdf20NOWyz2UUcmMgy1vpVJKHQumSDNxB9M0FwtkcB8+x0YjE4gB8AxUNA== =YiM1 -----END PGP SIGNATURE----- Merge tag 'imx-bindings-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX DT bindings update for 5.11: - Quite some patches that update vendor-prefixes.yaml and fsl.yaml to document missing board compatibles and add new board compatibles. - A couple of patches from Dong Aisheng to update imx-scu firmware and imx-lpcg clock bindings for new SCU two cells clock support. - A couple of net bindings update from Ioana Ciornei to complete the MAC/PCS/PHY representation on DPAA2 devices. - Document watchdog compatibles for all i.MX and Layerscape devices. * tag 'imx-bindings-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (35 commits) dt-bindings: arm: fsl: add Protonic WD3 board dt-bindings: vendor-prefixes: add "virtual" prefix dt-bindings: fsl: add kamstrup flex concentrator to schema dt-bindings: arm: fsl: document i.MX7S boards dt-bindings: arm: fsl: document SolidRun LX2160A boards dt-bindings: arm: fsl: document LS1012A FRWY board dt-bindings: arm: fsl: add Van der Laan LANMCU board dt-bindings: arm: fsl: add Altesco I6P board dt-bindings: vendor-prefixes: Add an entry for Altus-Escon-Company dt-bindings: net: add the 10gbase-r connection type dt-bindings: net: add the DPAA2 MAC DTS definition dt-bindings: fsl: add compatible for LX2162A QDS Board dt-bindings: vendor-prefixes: Add an entry for Van der Laan b.v. dt-bindings: arm: fsl: document i.MX7D boards dt-bindings: arm: fsl: document i.MX6ULL boards dt-bindings: arm: fsl: document i.MX6UL boards dt-bindings: arm: fsl: document i.MX6SX boards dt-bindings: arm: fsl: document i.MX6SL boards dt-bindings: arm: fsl: document i.MX6QP boards dt-bindings: arm: fsl: document i.MX6Q boards ... Link: https://lore.kernel.org/r/20201202142717.9262-3-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2020-12-08 23:57:15 +01:00
Arnd Bergmann	1e3e7ca547	arm64: dts: amlogic updates for v5.11 ... - AXG SoCs: add/enable PCIe & USB OTG support - AXG SoCs: add MIPI DSI support - Khadas VIM: add RTC - several cleanups & fixups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl/GxC4ACgkQWTcYmtP7 xmUbdA/+IA2JJZg9q2u0xJmePsft6QTwLqIiDRp970jfooVSLqSPz7xYhdlWiXR5 Gxzyv6Kyd0Nw/G16Ffl6sPs30/lMI8OYsR/imOqc8SYTRvUE/4gy0xXEd8aLWSU4 2g4B8k985WIEeRNz/788SoGvtpA+zXMmS7EHNczoyQaihfywE56fYaM/TjT+pi+a prrCxdiRCX8DGOjB6ynR8efQyguUxRhOKx5sJZnaymY5NhaYl0ZUjRNR8iqhkFj0 SLSGghTal5PcweVSDWMuZbtxaCtf6v3dnZ9ohzS0w25U7xnNoVVQX/OMjA19ZLDt SX2QcS5fCr1BcTfSxsw8zXrbPAqGlrb1PlWdf9uneHf02ze38P7FZSQFhyjzM+1v L9aZgSbvg4jJ/H/p8HFyxuf3ynQMzadRkhcfGo5sUfGWDgwG6189tNjpTPD3BSub CguzUOSuIfml/8KnS0S5aI0NCXyESprHfNwZQyvz6FdgXxdtF38twwKgpmUHUoxA uw5bzpJgrpF7PM9OpmP/yCfETj4EQ++hQyosJNeAweIrt+VIkQ/OW4SZ5dBrwB3k R0rCU80E5gpNBrmmY7AvbjCv91DH2xzxz7/w2FZmt5vs5KBxRCPnCkeRwor0n+sT asQ0YMUoMnJqCbay8ditaARhCvNQCfNe8w+KDrr2MqnCi/PLYLw= =XtmV -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: amlogic updates for v5.11 - AXG SoCs: add/enable PCIe & USB OTG support - AXG SoCs: add MIPI DSI support - Khadas VIM: add RTC - several cleanups & fixups * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-sm1: fix typo in opp table arm64: dts: meson: add KHAMSIN IR remote node to SML5442TW arm64: dts: meson: update the Khadas VIM3/3L LED bindings arm64: dts: meson: fix spi-max-frequency on Khadas VIM2 arm64: dts: meson: add rtc aliases to meson-khadas-vim3.dtsi arm64: dts: meson: Add capacity-dmips-mhz attributes to GXM arm64: dts: meson-axg-s400: enable PCIe M.2 Key E slots arm64: dts: meson-axg: add PCIe nodes arm64: dts: meson-axg: add MIPI DSI PHY nodes arm64: dts: meson-axg: add PWRC node arm64: dts: meson: enable rtc node on Khadas VIM1/VIM2 boards dt-bindings: clk: axg-clkc: add MIPI DSI Host clock binding dt-bindings: clk: axg-clkc: add Video Clocks arm64: dts: meson: add watchdog to g12-common dtsi arm64: dts: meson: remove empty lines from aml-s905x-cc v2 dts Link: https://lore.kernel.org/r/7heek9jgox.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2020-12-08 23:56:07 +01:00
Arnd Bergmann	a39d2ef78d	Qualcomm ARM64 DT updates for 5.11 ... For SM8250 the recently introduced support for handling boot-loader stream mappings in the ARM SMMU allow us to enable this, and thereby USB controller and PHY, SDHCI controller and FastRPC, as well as support for the SM8250 HDK board has been added. Additionally PRNG and RTC is enabled. Similarly for SM8150, the ARM SMMU could be added which allows the secondary USB controller and PHYs, as well as WiFi to be added and support for the SM8150 HDK board to be introduced. Additionally Coresight and support for the last-level cache controller was added. MSM8916 finally has VDDCX and VDDMX removed as regulators and are now handled by the rpmpd driver for the devices controlling them. The Longsheer L8150 gains touchscreen, sensors, vibrator and LED support. MSM8992 gains USB and SDHCI support as well as an I2C controller and the associated RMI4 based touchscreen for the Lumia 950. MSM8994 also gains USB and SDHCI support, as well as VADC and temp-alarm support. Then support for the Lumia 950 XL is added. SDM845 gains interconnect properties for a number of devices and the GENI wrappers gains iommu stream configuration, which means DMA operations on e.g. I2C now works. The Lenovo Yoga C630 finally has the SMMU enabled, a few fixes and the description of the eDP bridge and panel means that the laptop can now boot mainline with working display, GPU, WiFi and audio. SC7180 gains a slew of smaller improvements and fixes. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl/FP0cbHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FINAP/11hbDNRXJ+3oqLk53aD /8G0Xbyzy9gekpYURZwJJrjaGY7l1psM39Kbo+flUPusFfxRBNmbWrw57PPbzjyS d3RnPXuc/XDkOvCHtQstowtdKBl5EIXU6ec9xg4RY5bZUiD5Fpk8OLBAitvruEqy 6YCgMhy5yRspb8iBXA5N4ERU0EsQBOMIIoP6DRuGkeMkUhk/QllO+xwAr6ugI3Ot s3gua4tjWfi5kxT0bXklU4fk7Xeiuy6VL+giddd4dWVUm2GdO7jRlU6ae6CLoi2k PStZJcca8uOpTMpF4ZqMLNX51UAk+VZsCvjMm5pYIQAWCp15sWyMA20wi8vM+cjx HHhsXU7WAqQfLzMntgUd36CJaTuGw8J+QzQyNpQeHjbL6tAA15BfnIIQ+RUZWgsx XoPWdSvmUBhyo9g2cR7yXRXQGxvMRy/w7uHgv6Szb9KkDxeBnpYMjBMrbaZAsyMA YoYvhdIO9HkL2IbUxQgiszQsD58aDvauEY+KpOZclVW5ODPhJmsSTZK2aH/L6kj9 6hn0rOBrXy8rZE5Vs08C5D2WvqZ0Ib45vXNpb9uucvyXXNZMywGw+94B3YMNbkCz /C9C1DJcRX1NZjJnQco3Cn0Ni7AmRzD5aAHi3n2BhxbsxOxZ6v0SjEDbce+lXwYJ 5l4AcPSLDjGXFJsbUPQrHvJF =lkn4 -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for 5.11 For SM8250 the recently introduced support for handling boot-loader stream mappings in the ARM SMMU allow us to enable this, and thereby USB controller and PHY, SDHCI controller and FastRPC, as well as support for the SM8250 HDK board has been added. Additionally PRNG and RTC is enabled. Similarly for SM8150, the ARM SMMU could be added which allows the secondary USB controller and PHYs, as well as WiFi to be added and support for the SM8150 HDK board to be introduced. Additionally Coresight and support for the last-level cache controller was added. MSM8916 finally has VDDCX and VDDMX removed as regulators and are now handled by the rpmpd driver for the devices controlling them. The Longsheer L8150 gains touchscreen, sensors, vibrator and LED support. MSM8992 gains USB and SDHCI support as well as an I2C controller and the associated RMI4 based touchscreen for the Lumia 950. MSM8994 also gains USB and SDHCI support, as well as VADC and temp-alarm support. Then support for the Lumia 950 XL is added. SDM845 gains interconnect properties for a number of devices and the GENI wrappers gains iommu stream configuration, which means DMA operations on e.g. I2C now works. The Lenovo Yoga C630 finally has the SMMU enabled, a few fixes and the description of the eDP bridge and panel means that the laptop can now boot mainline with working display, GPU, WiFi and audio. SC7180 gains a slew of smaller improvements and fixes. * tag 'qcom-arm64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (93 commits) arm64: dts: qcom: c630: Define eDP bridge and panel arm64: dts: qcom: c630: Fix pinctrl pins properties arm64: dts: qcom: c630: Polish i2c-hid devices arm64: dts: qcom: sc7180: Add lpass cpu node for I2S driver arm64: dts: sdm845: Add interconnect properties for QUP interconnect: qcom: sdm845: Add the missing nodes for QUP dt-bindings: interconnect: sdm845: Add IDs for the QUP ports arm64: dts: qcom: c630: Expose LID events arm64: dts: qcom: c630: Re-enable apps_smmu dts: qcom: sdm845: Add dt entries to support crypto engine. arm64: dts: qcom: qrb5165-rb5: Add support for MCP2518FD arm64: dts: qcom: sdm845: use GIC_SPI for IPA interrupts arm64: dts: qcom: sc7180: use GIC_SPI for IPA interrupts arm64: dts: qcom: sc7180: limit IPA iommu streams arm64: dts: qcom: sm8150: Add Coresight support arm64: dts: qcom: sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub arm64: dts: qcom: sc7180: Add DDR/L3 votes for the pro variant arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite arm64: dts: qcom: sc7180-trogdor: add "pen-insert" label for trogdor arm64: qcom: sc7180: trogdor: Add ADC nodes and thermal zone for charger thermistor ... Link: https://lore.kernel.org/r/20201130190131.345187-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2020-12-08 23:50:08 +01:00
Arnd Bergmann	5161540797	mt8173: ... - add new power domain controller node mt8183: - add new power domain controller - add display, iommu and dsi nodes mt8192: - add basic support, pinctrl, uart, spi, i2c and timer mt8516: - add auxadc, efuse and usb nodes mt8167: - add basic support for the SoC - add support for the pumkin board mt6779: - add initial support, interrupt controller, clocks, uart mt7622: - PWM node for all available PWM channels -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAl/EC2oXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH6e9BAAkG3psWVaYuiHUnlEbIvIWFPx pCS7KV0J5kXe3F/oEAlQWDHiipAEVMyr9ABXnALfwjoqy7hAV6g775COLfZMR/ia oxBtYWKbKE3/6LSLr6F9l4bJKvox/qpd7hWCkDW3/2xZ2zzZLZo7BPU0o6kHXQAr ZdgtFx9Fxy1q2BIo/GP7wXmSt6dl+O9XTGAt/Hx3U2jQ5PMrQDblICbiEYFLSotR I58Nw7vKDrQ6bFQfXSOza5FjNoGswzB8wEzi3etEcSsYvinwhuTkqhVAs7kYgxqJ mp93ydrM2hsTy71p4kEA7uNaGKIrBPkzLVmwt3tWZ7nh/BE6IXt6hIWIUgHX4igL e31BG7u3IkYAwFMV9XJ5KZL37oQwF5UytrrwLIxN+dmozcfF1nd/r0VxJQkmfQ00 DUQvqhPUKAGJDgFNK5f+Kh3A+8JIkZpxN6GxqUdKitlgA1hUTbafaVXKG0fcADsu 8wRO6+JA0/pL36QU+3zPrLC6FinZGoPa9lWCdP0YmXOLTw3BGoa9nwkvwIMvcw2X 3aKIOBWglxds3XYVMP+bWrWV3sat1vFIh03lK/gbhci2h2WFdpDfZ+wFu7Y2WNAf DQP45UkGI/sN+1MpDWfpK/oxVWMwxCNoEtOhHCDXBMh/6ysjmrRTbm1vqLLaNYQP WYzIYR/BaYpJQUz+xUM= =DU+G -----END PGP SIGNATURE----- Merge tag 'v5.10-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt8173: - add new power domain controller node mt8183: - add new power domain controller - add display, iommu and dsi nodes mt8192: - add basic support, pinctrl, uart, spi, i2c and timer mt8516: - add auxadc, efuse and usb nodes mt8167: - add basic support for the SoC - add support for the pumkin board mt6779: - add initial support, interrupt controller, clocks, uart mt7622: - PWM node for all available PWM channels * tag 'v5.10-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (25 commits) dts64: mt7622: disable spi1 and uart2 because pins are used by pwm dts64: mt7622: enable all pwm for bananapi r64 arm64: dts: mt8183: Add display nodes for MT8183 arm64: dts: mt8183: Add iommu and larb nodes arm64: dts: mt8183: Add dsi node arm64: dts: mt8183: Add pwm and backlight node arm64: dts: mediatek: Add mt8183 power domains controller arm64: dts: mediatek: Add smi_common node for MT8183 arm64: dts: mediatek: Add mt8173 power domain controller dt-bindings: power: Add MT8192 power domains dt-bindings: power: Add MT8183 power domains dt-bindings: power: Add bindings for the Mediatek SCPSYS power domains controller arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile arm64: dts: mediatek: add MT8167 pumpkin board dts arm64: dts: mediatek: add dtsi for MT8167 dt-bindings: arm64: dts: mediatek: Add mt8167-pumpkin board arm64: dts: mediatek: mt8516: add efuse node arm64: dts: mediatek: align GPIO hog names with dtschema arm64: dts: mediatek: mt8516: add usb1 node arm64: dts: mediatek: mt8516: rename usb phy ... Link: https://lore.kernel.org/r/72fe1c4f-f27c-c455-dfd9-66bde90bb295@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2020-12-08 23:38:36 +01:00
Manivannan Sadhasivam	bdf7805b8c	dt-bindings: clock: Add GDSC in SDX55 GCC ... Add GDSC instances in SDX55 GCC block. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20201126072844.35370-6-manivannan.sadhasivam@linaro.org Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-12-07 17:00:14 -08:00
Vinod Koul	2e2639b7ef	dt-bindings: clock: Introduce RPMHCC bindings for SDX55 ... Add compatible for SDX55 RPMHCC and DT include. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201126072844.35370-4-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-12-07 17:00:14 -08:00
Vinod Koul	a13ae5a379	dt-bindings: clock: Add SDX55 GCC clock bindings ... Add device tree bindings for global clock controller on SDX55 SoCs. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201126072844.35370-2-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-12-07 16:59:58 -08:00
Michael Walle	4cb15934ba	clk: qoriq: provide constants for the type ... To avoid future mistakes in the device tree for the clockgen module, add constants for the clockgen subtype as well as a macro for the PLL divider. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201108185113.31377-4-michael@walle.cc Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-12-07 16:53:30 -08:00
Daniel Palmer	588cc1a026	dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver ... Header adds defines for the gpio number of each pad from the driver view. The gpio block seems to have enough registers for 128 lines but what line is mapped to a physical pin depends on the chip. The gpio block also seems to contain some registers that are not related to gpio but needed somewhere to go. Because of the above the driver itself uses the index of a pin's offset in an array of the possible offsets for a chip as the gpio number. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201129110803.2461700-2-daniel@0x0f.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>	2020-12-05 22:40:28 +01:00
Thierry Reding	64a38367b4	dt-bindings: gpio: Use Tegra186-specific include guard ... Use a unique include guard for the Tegra186 GPIO DT bindings header to avoid clashes with the DT bindings header for earlier chips. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20201127140852.123192-2-thierry.reding@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>	2020-12-05 22:34:12 +01:00
周琰杰 (Zhou Yanjie)	0fce2e02a2	dt-bindings: timer: Add new OST support for the upcoming new driver. ... The new OST has one global timer and two or four percpu timers, so there will be three combinations in the upcoming new OST driver: the original GLOBAL_TIMER + PERCPU_TIMER, the new GLOBAL_TIMER + PERCPU_TIMER0/1 and GLOBAL_TIMER + PERCPU_TIMER0/1/2/3, For this, add the macro definition about OST_CLK_PERCPU_TIMER0/1/2/3. And in order to ensure that all the combinations work normally, the original ABI values of OST_CLK_PERCPU_TIMER and OST_CLK_GLOBAL_TIMER need to be exchanged to ensure that in any combinations, the clock can be registered (by calling clk_hw_register()) from index 0. Before this patch, OST_CLK_PERCPU_TIMER and OST_CLK_GLOBAL_TIMER are only used in two places, one is when using "assigned-clocks" to configure the clocks in the DTS file; the other is when registering the clocks in the sysost driver. When the values of these two ABIs are exchanged, the ABI value used by sysost driver when registering the clock, and the ABI value used by DTS when configuring the clock using "assigned-clocks" will also change accordingly. Therefore, there is no situation that causes the wrong clock to the configured. Therefore, exchanging ABI values will not cause errors in the existing codes when registering and configuring the clocks. Currently, in the mainline, only X1000 and X1830 are using sysost driver, and the upcoming X2000 will also use sysost driver. This patch has been tested on all three SoCs and all works fine. Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201026155842.10196-2-zhouyanjie@wanyeetech.com	2020-12-03 19:16:18 +01:00
Adam Ward	744ef9b091	regulator: Update DA9121 dt-bindings ... Update bindings for the Dialog Semiconductor DA9121 voltage regulator to add device variants. Because several variants have multiple regulators, and to regard potential to add GPIO support in future, the 'regulators' sub-node is added, following the precedent set by other multi-regulator devices, including the DA9211 family. This breaks compatibility with the original submission by Vincent Whitchurch - but as this is still in for-next, the alignment could be made before upstreaming occurs. Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com> Link: https://lore.kernel.org/r/0606d3ded5fef4c38760246146f197db4ce3a374.1606755367.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown <broonie@kernel.org>	2020-12-01 12:17:55 +00:00
Georgi Djakov	8742bb4bf2	dt-bindings: interconnect: sdm845: Add IDs for the QUP ports ... The QUP ports exist in the topology, but are not exposed as an endpoints in DT. Fix this by creating IDs and attach them to their NoCs, so that the various QUP drivers (i2c/spi/uart etc.) are able to request their interconnect paths and scale their bandwidth. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20201105135211.7160-1-georgi.djakov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>	2020-11-30 10:42:47 -06:00
Arnd Bergmann	bbecede458	power-domains: ... - add support for new power domain driver. - add support for mt8183 and mt8192 devapc: - add support for the devapc device found on mt6779 to identify of malicious bus accesses from a controller to a device mmsys: - move DDP routing IDs into the driver cmdq: - drop timeout handler support as not usefull scpsys: - print warning on theoretical error -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAl/EDZoXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH7zEw/8DW7/eqjvP71tJG7qvlhASy1R S6YYrnmx8R/A41um3tAYcfgPCm+xPGeqIsBRFWOxmLmw71ebu/EQyuuvGFx6qY2c p4pZdafkM7IrNYD0JLpLIpFZAqikPtz2WefzPqHD8WTaGKqQ+neoNWS2twVIpiTz N0wpkl3BuFTcjirDaeME8BY31UxhP2E9LK+IMSZmfnhfIJjgw4/A5/pbAVM+EUhC LqqSRn1uGmvibAQXVFDyhk/tLZJCe4X3OLkgXwlTKCIcd0qpVCWT+2xoxIV7r30G Ldddt8LwVVuebSaY5NTtQQy4t0ZBx79a+17eTDt/+cIc6k3F5Bucnl/dKssWS9dO /lXs5jpJvcmeWNgvYhbGhXj42CrekY3I3aZpZnJDCl6dG74NWbWSe+xAxxH417s0 9t5cNDLW9L21NhkMGXFX+a8LbMiT1s+UeM4UXHnCGHX2Mx2cQoP/ATr7d5ED+Jr6 3xdKO6r7YnJANZ4UAvIVhbbak2pMT5BUhU/jM1LAMZ/JkEscfjyvdOyorAMFR5Ka hUFcfaJJ0hcVkfSEbF0LPsoNI8XHIY1i0bar4ZIKYr6asTgtVyHHh/BHfO25LW+4 T4Vpr3ugj7znuomFuPCYXfy/3NN1TlFWfTtI8GwGCAdX6gihdoJ/We8KRqoCWrdp bEefKIDJxFWMNMA48j0= =mQNT -----END PGP SIGNATURE----- Merge tag 'v5.10-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers power-domains: - add support for new power domain driver. - add support for mt8183 and mt8192 devapc: - add support for the devapc device found on mt6779 to identify of malicious bus accesses from a controller to a device mmsys: - move DDP routing IDs into the driver cmdq: - drop timeout handler support as not usefull scpsys: - print warning on theoretical error * tag 'v5.10-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (21 commits) soc: mediatek: mmsys: Use devm_platform_ioremap_resource() soc / drm: mediatek: Move DDP component defines into mtk-mmsys.h soc: mediatek: add mt6779 devapc driver dt-bindings: devapc: add bindings for mtk-devapc soc / drm: mediatek: cmdq: Remove timeout handler in helper function soc: mediatek: pm-domains: Add support for mt8192 soc: mediatek: pm-domains: Add default power off flag soc: mediatek: pm-domains: Add support for mt8183 soc: mediatek: pm-domains: Allow bus protection to ignore clear ack soc: mediatek: pm-domains: Add subsystem clocks soc: mediatek: pm-domains: Add extra sram control soc: mediatek: pm-domains: Add SMI block as bus protection block soc: mediatek: pm_domains: Make bus protection generic soc: mediatek: pm-domains: Add bus protection protocol soc: mediatek: Add MediaTek SCPSYS power domains dt-bindings: power: Add MT8192 power domains dt-bindings: power: Add MT8183 power domains dt-bindings: power: Add bindings for the Mediatek SCPSYS power domains controller mfd: syscon: Add syscon_regmap_lookup_by_phandle_optional() function. MAINTAINERS: change mediatek wiki page ... Link: https://lore.kernel.org/r/b03fe343-e183-c6f3-f2dc-4c58aae3146b@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2020-11-30 17:22:03 +01:00
Weiyi Lu	343106d9e6	dt-bindings: power: Add MT8192 power domains ... Add power domains dt-bindings for MT8192. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201030113622.201188-15-enric.balletbo@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>	2020-11-27 11:58:08 +01:00
Enric Balletbo i Serra	86a378bb1e	dt-bindings: power: Add MT8183 power domains ... Add power domains dt-bindings for MT8183. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201030113622.201188-11-enric.balletbo@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>	2020-11-27 11:58:07 +01:00
Dmitry Osipenko	24a7eaea0a	dt-bindings: memory: tegra124: Add memory client IDs ... Each memory client has unique hardware ID, add these IDs. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>	2020-11-26 19:05:16 +01:00
Dmitry Osipenko	f25696bce9	dt-bindings: memory: tegra30: Add memory client IDs ... Each memory client has unique hardware ID, add these IDs. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>	2020-11-26 19:05:15 +01:00
Dmitry Osipenko	825c7f4aa2	dt-bindings: memory: tegra20: Add memory client IDs ... Each memory client has unique hardware ID, add these IDs. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>	2020-11-26 19:05:15 +01:00
Vinod Koul	f365bd3355	dt-bindings: power: Add rpm power domain bindings for sdx55 ... Add RPM power domain bindings for the SDX55 SoC Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201126092711.1084518-1-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>	2020-11-26 11:50:21 -06:00
Neil Armstrong	312489790c	dt-bindings: clk: g12a-clkc: add DSI Pixel clock bindings ... This adds the MIPI DSI Host Pixel Clock bindings. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201126141600.2084586-2-narmstrong@baylibre.com	2020-11-26 15:23:34 +01:00
Thara Gopinath	8d5d3c7a5b	dt-bindings: clock: Add entry for crypto engine RPMH clock resource ... Add clock id forc CE clock resource which is required to bring up the crypto engine on sdm845. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Link: https://lore.kernel.org/r/20201119155233.3974286-2-thara.gopinath@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-11-24 18:05:11 -08:00
Vinod Koul	678198f211	dt-bindings: dmaengine: Document qcom,gpi dma binding ... Add devicetree binding documentation for GPI DMA controller implemented on Qualcomm SoCs Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201109085450.24843-2-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>	2020-11-24 21:41:59 +05:30
Neil Armstrong	cd3caa573e	dt-bindings: clk: axg-clkc: add MIPI DSI Host clock binding ... Add the clock ID for the MIPI DSI Host clock. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200915124553.8056-3-narmstrong@baylibre.com	2020-11-23 09:06:34 +01:00
Neil Armstrong	b5330c565e	dt-bindings: clk: axg-clkc: add Video Clocks ... Add clock IDs for the video clocks. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200915124553.8056-2-narmstrong@baylibre.com	2020-11-23 09:06:33 +01:00
Joakim Zhang	cefd754d13	dt-bindings: firmware: add IMX_SC_R_CAN(x) macro for CAN ... Add IMX_SC_R_CAN(x) macro for CAN. Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20201106105627.31061-5-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>	2020-11-20 12:06:45 +01:00
Tony Lindgren	57f5720136	clk: ti: dra7: Drop idlest polling from IVA clkctrl clocks ... Similar to what we've done for IPU and DSP let's ignore the status bit for the IVA clkctrl register. The clkctrl status won't change unless the related rstctrl is deasserted, and the rstctrl status won't change unless the clkctrl is enabled. Cc: linux-clk@vger.kernel.org Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Suman Anna <s-anna@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>	2020-11-19 15:09:00 +02:00
周琰杰 (Zhou Yanjie)	46d613fd8d	dt-bindings: dmaengine: Add X2000 bindings. ... Add the dmaengine bindings for the X2000 SoC from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201107122016.89859-3-zhouyanjie@wanyeetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org>	2020-11-18 16:26:35 +05:30
周琰杰 (Zhou Yanjie)	5b7b41cbf2	dt-bindings: dmaengine: Add JZ4775 bindings. ... Add the dmaengine bindings for the JZ4775 SoC from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201107122016.89859-2-zhouyanjie@wanyeetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org>	2020-11-18 16:26:35 +05:30
Álvaro Fernández Rojas	8c9e8b0a28	mips: bmips: add BCM6318 reset controller definitions ... BCM6318 SoCs have a reset controller for certain components. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <F.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>	2020-11-17 21:53:39 +01:00
Álvaro Fernández Rojas	b7aa228813	mips: bmips: dts: add BCM63268 reset controller support ... BCM63268 SoCs have a reset controller for certain components. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>	2020-11-17 21:53:23 +01:00
Álvaro Fernández Rojas	7acf84e878	mips: bmips: dts: add BCM6368 reset controller support ... BCM6368 SoCs have a reset controller for certain components. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>	2020-11-17 21:53:03 +01:00
Álvaro Fernández Rojas	226383600b	mips: bmips: dts: add BCM6362 reset controller support ... BCM6362 SoCs have a reset controller for certain components. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>	2020-11-17 21:52:46 +01:00
Álvaro Fernández Rojas	8079cfba4c	mips: bmips: dts: add BCM6358 reset controller support ... BCM6358 SoCs have a reset controller for certain components. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>	2020-11-17 21:52:27 +01:00
Álvaro Fernández Rojas	83f865d7e3	mips: bmips: dts: add BCM6328 reset controller support ... BCM6328 SoCs have a reset controller for certain components. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>	2020-11-17 21:52:04 +01:00
Srinivas Kandagatla	7dbe5a7a3f	dt-bindings: clock: Add support for LPASS Always ON Controller ... Always ON Clock controller is a block inside LPASS which controls 1 Glitch free muxes to LPASS codec Macros. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20201026120221.18984-3-srinivas.kandagatla@linaro.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-11-04 18:34:54 -08:00
Srinivas Kandagatla	a6dee2fe77	dt-bindings: clock: Add support for LPASS Audio Clock Controller ... Audio Clock controller is a block inside LPASS which controls 2 Glitch free muxes to LPASS codec Macros. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20201026120221.18984-2-srinivas.kandagatla@linaro.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-11-04 18:34:54 -08:00
Taniya Das	57b971907e	dt-bindings: clock: Add YAML schemas for the QCOM Camera clock bindings. ... The Camera Subsystem clock provider have a bunch of generic properties that are needed in a device tree. Add a YAML schemas for those. Add clock ids for camera clocks which are required to bring the camera subsystem out of reset. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1602873815-1677-4-git-send-email-tdas@codeaurora.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-11-04 18:26:56 -08:00
Badhri Jagan Sridharan	5ed132db5a	dt-bindings: connector: Add property to set initial current cap for FRS ... This change adds frs-typec-current which allows setting the initial current capability of the new source when vSafe5V is applied during PD3.0 sink Fast Role Swap. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201020093627.256885-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2020-10-28 13:06:58 +01:00
Nicolin Chen	65abc8ef57	dt-bindings: memory: tegra: Add missing swgroups ... According to Tegra X1 TRM, there are missing swgroups in the tegra210_swgroups list. So this patch adds them in bindings. Note that the TEGRA_SWGROUP_GPU (in list) should be actually TEGRA_SWGROUP_GPUB (in TRM), yet TEGRA_SWGROUP_GPU (in TRM) is not being used -- only TEGRA_SWGROUP_GPUB (in TRM) is. So this patch does not add TEGRA_SWGROUP_GPU (in TRM) and keeps TEGRA_SWGROUP_GPU (in list) as it is. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20201008003746.25659-5-nicoleotsuka@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>	2020-10-27 20:52:30 +01:00
Alexandru Ardelean	ab589bac55	ASoC: adau1977: remove platform data and move micbias bindings include ... The change removes the platform_data include/definition. It only contains some values for the MICBIAS. These are moved into 'dt-bindings/sound/adi,adau1977.h' so that they can be used inside device-trees. When moving then, they need to be converted to pre-compiler defines, so that the DT compiler can understand them. The driver then, also needs to include the new 'dt-bindings/sound/adi,adau1977.h' file. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201019105313.24862-1-alexandru.ardelean@analog.com Signed-off-by: Mark Brown <broonie@kernel.org>	2020-10-26 18:37:03 +00:00
Stephan Gerhold	819f7d91ad	dt-bindings: power: rpmpd: Add MSM8916 RPM power domains ... MSM8916 has two RPM power domains: VDDCX and VDDMX. Add the device tree bindings to manage them through rpmpd. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200916104135.25085-3-stephan@gerhold.net Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>	2020-10-26 10:14:39 -05:00
Jun Nie	1dd50f17d6	dt-bindings: power: rpmpd: Add MSM8939 RPM power domains ... MSM8939 has three RPM power domains: VDDCX and VDDMX and VDDMDCX. Add the device tree bindings to manage them through rpmpd. Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jun Nie <jun.nie@linaro.org> Link: https://lore.kernel.org/r/20200930100145.9457-2-jun.nie@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>	2020-10-26 10:13:56 -05:00
Konrad Dybcio	ee84049c13	dt-bindings: power: rpmpd: Add SDM660 power-domains bindings ... Add the new bindings for SDM660 rpmpd power domains. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Link: https://lore.kernel.org/r/20201018122620.9735-2-kholk11@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>	2020-10-26 10:11:58 -05:00
Dong Aisheng	540742fb10	dt-bindings: clock: imx-lpcg: add support to parse clocks from device tree ... MX8QM and MX8QXP LPCG Clocks are mostly the same except they may reside in different subsystems across CPUs and also vary a bit on the availability. Same as SCU clock, we want to move the clock definition into device tree which can fully decouple the dependency of Clock ID definition from device tree and make us be able to write a fully generic lpcg clock driver. And we can also use the existence of clock nodes in device tree to address the device and clock availability differences across different SoCs. Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Michael Turquette <mturquette@baylibre.com> Cc: devicetree@vger.kernel.org Cc: Shawn Guo <shawnguo@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>	2020-10-26 10:51:29 +08:00
Linus Torvalds	e533cda12d	ARM: Devicetree updates ... As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TVacPHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx37MMP/imMO5e0QY1/7xxXWm4Kgc/Uffqw2Dvhj74a 4Nrudwz6oUFGpZzIFYxqeCeWwotjA0nXmvM4Nl/SbxtlbV6nY/JrOL1OJToaGY0z Oc1jdA0MdXITdi6Xl5PTRqDeIHTSUmTclZWi5gvT7LFEvHog3mquJ7PiNTrjyuV0 9BmHipwfmH6V5gDJZvN2dDlkhy0cpQKJFw7ylKCL89UNiEAd2QtNG0d0RLdz7yPX IGdecFelOhG9MSZyuFYYB2HOI33ukjZ9dA+yFy7BWOqegf/Z5hI02mxpke7Sys/5 4XEN7ksSSYr6sm3h9XNW++IYkapZ9y/ZW+sQdiBZ3GMOwMXj02TdRkpC7f+FgAPo Hl7yXodGmXynL6ULu7/lIbBvqfWkLcwfVCYZx6PoWRE2q5g5ifoYp9b8kI5cLXrb BJn85XIuIaoO0cgrq7EzZnksaiwY1CNL84mYgkKRCGbBoJKHRiU+8Ilm5SKzk3kq KJ0gmbwFMjvTYxs3g6LPCo0jUNLjmLQMr0tL7iHDWkk5uqA+gfjKSLQfPby3jrMr 6RDZBzMB+tPz1e++RWo41XD/Mm2kw8MGstsCOLzk2TdLh7e3fPfU4g7m0aqs/Q1y +LCqshffF/XVzV2uTFHDUGWufIM9nY6rdzuBc+JACJ5E+QyDg1tGKtMB3TYqgdN2 aRY3NLSv =xjfB -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM Devicetree updates from Olof Johansson: "As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits) ARM: dts: nspire: Fix SP804 users arm64: dts: lg: Fix SP804 users arm64: dts: lg: Fix SP805 clocks ARM: mstar: Fix up the fallout from moving the dts/dtsi files ARM: mstar: Add mstar prefix to all of the dtsi/dts files ARM: mstar: Add interrupt to pm_uart ARM: mstar: Add interrupt controller to base dtsi ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml ...	2020-10-24 10:44:18 -07:00
Linus Torvalds	2e368dd2bb	ARM: SoC-related driver updates ... Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms. -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TUboPHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx3T4YP/R5pjF2C1gt8FrCaG4IfhIY1VHWelfPcB5qB RC7Pn4MCRCEY+10YPXA70oS6KBaC+gtZ4bPeInzfLXh1ynFJJb+XtAIxoRhnkEw+ /R979wNcIls9JqkvnHWFx29Y008W2ZNcXVNKH7O2Gxy+eKzDcTMsoH/zj8xWrV5b +eBllTzGU4RArYRJdcwOBQwMO6L2pzADHZ7hGMAY//8fo+qrxg8b9EINsH1UHCa8 gQdWdVlmv6GeLB6RYLRBCWxpW4jOLDqEAvyDV84QQmYHvzD9tqJExNR0hfGTs4TU TZWK7LWSNqF0ujQUbFh9Ikcx6DypU1gvE7LKhCDrf4D7HLRX5v4BjGH+xtVtjsyD xzh4WEoa3qCNu1mxQjKG8Y6U7bB9cRI2TPVxbbmI4ZuF0njvybecwwOZUBQl4aD4 5x+Df3pO/E5ECLOBeTnLgvw20fcjHv4HP8l63B6ADb31FUiZrJXItvayY5qXWe+P HSgUykmVA4nd4PnLsSj9seyWqOTIqUZ3U3TsmfxIQh2Otie01okwuHb1J7ErO/u0 W148SgSwVbnkPxjbBHKGgC2r+Q/AjSDGRBYL0ThIVFUztxTBBwhj3FIvMnyyxTIj yFBY14KQ8FcNUs8DrbPCaAx/RDCB02IHdvvIlyTmU3RBq7UhJVIglpLzzo2ed9F2 5u/aVH3y =tfPb -----END PGP SIGNATURE----- Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits) drm/mediatek: reduce clear event soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api soc: mediatek: cmdq: add jump function soc: mediatek: cmdq: add write_s_mask value function soc: mediatek: cmdq: add write_s value function soc: mediatek: cmdq: add read_s function soc: mediatek: cmdq: add write_s_mask function soc: mediatek: cmdq: add write_s function soc: mediatek: cmdq: add address shift in jump soc: mediatek: mtk-infracfg: Fix kerneldoc soc: amlogic: pm-domains: use always-on flag reset: sti: reset-syscfg: fix struct description warnings reset: imx7: add the cm4 reset for i.MX8MQ dt-bindings: reset: imx8mq: add m4 reset reset: Fix and extend kerneldoc reset: reset-zynqmp: Added support for Versal platform dt-bindings: reset: Updated binding for Versal reset driver reset: imx7: Support module build soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk soc: fsl: qman: convert to use be32_add_cpu() ...	2020-10-24 10:39:22 -07:00
Linus Torvalds	1f70935f63	ARM: SoC fixes ... I had queued up a batch of fixes that got a bit close to the release for sending in before the merge window opened, so I'm including them in the batch of pull requests instead. They're mostly smaller DT tweaks and fixes, the usual mix that we tend to have through the releases. -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TTg8PHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx3kQUP/j1HTcEOghLsUPAiV+kz1qEWjS1tcm4/OV+b +Tp4pQh5Fy++iXS9yWmCgr/kMxJ4EQkCZERO+8a1VNBms/+0j3KiFuiGsZo0rKZU QdJvY3q8JYoLYdbyYJ8B7WAT6oS0giBoskGT6FRiwPC7uqM7va1KZOtNeESblt+6 Ty4w5ognXbAvSLz+2VaTZTLbO7fbvd3oSwmbnN7n/qhoRPwaNExJHXTI057ekh4Y XqjGbYYTwY+Cdm8DkI1Dz2EPKegmSaVxS7+xzacNosx0559qe3pqrZ5OqrTui00Y /2T5caepAAjdEQsX6es2+mKRRXXWPRJMzHegv/mWvqJ68DPJZLgoHFcY2xy4cclr ALyc96rEbJTQw5jgoJO1waD6vMZOA7EqE3IXREtxcK8xYRvnK6Od8BJt7lCvB7jN Ws6U8udqPmeC+PUV9yhBhS8eR/S8MjeQfPK9h0xqqLEhHXqFTeqLHk3EompUaIsy BwPmPuZI7MBrtwXvrpbdd6I2iw/7XetIrtvSO6Z/d7iZYlf49WJhh6gBtPRnOKGX zOc90ohFjw/oMFoMpCHsXzyzrwtd/AUqEu/ZRV/yr4yvkpjfpwIRN/cTsN32nRYy Oi3BTSxow88U7CxZTwkWtwoB+alJ0ZKh3QeyLa/dwiMgj+eUc900kZLqroEMNXO1 1JWG9qL4 =tvbv -----END PGP SIGNATURE----- Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I had queued up a batch of fixes that got a bit close to the release for sending in before the merge window opened, so I'm including them in the merge window batch instead. Mostly smaller DT tweaks and fixes, the usual mix that we tend to have through the releases" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: iwg20d-q7-common: Fix touch controller probe failure ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2 soc: actions: include header to fix missing prototype arm64: dts: ti: k3-j721e: Rename mux header and update macro names soc: qcom: pdr: Fixup array type of get_domain_list_resp message arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells arm64: dts: qcom: kitakami: Temporarily disable SDHCI1 arm64: dts: sdm630: Temporarily disable SMMUs by default arm64: dts: sdm845: Fixup OPP table for all qup devices arm64: dts: allwinner: h5: remove Mali GPU PMU module ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator soc: xilinx: Fix error code in zynqmp_pm_probe()	2020-10-24 10:26:06 -07:00
Linus Torvalds	3fec0eaaf0	This pull request contains zero diff to the core framework. It is a collection ... of various clk driver updates. The biggest driver updates in terms of lines of code is the Allwinner driver, closely followed by the Qualcomm and Mediatek drivers. All of those hit high because we add so many lines of clk data. Coming in fourth place is i.MX which also adds a bunch of clk data. This accounts for the new driver additions this time around. Otherwise the patches are lots of little cleanups and fixes for various clk drivers that have baked in linux-next for a while. I suppose one highlight or theme is that more clk drivers are being updated to work as modules, which is interesting to see such critical SoC infrastructure work as a loadable module. New Drivers: - Support qcom SM8150/SM8250 video and display clks - Support Mediatek MT8167 clks - Add clock for CRC block found on vf610 SoCs - Add support for the Renesas R-Car V3U (R8A779A0) SoC - Add support for the VSP for Resizing clock on Renesas RZ/G1H - Support Allwinner A100 SoC clks Removed Drivers: - Remove i.MX21 clock driver, as i.MX21 platform support is being dropped Updates: - Change how qcom's display port clks work - Small non-critical fixes for TI clk driver - Remove various unused variables in clk drivers - Allow Rockchip clk driver to be a module - Remove most __clk_lookup() calls in Samsung drivers (yay!) - Support building i.MX ARMv8 platforms clock driver as module - Some kerneldoc fixes here and there - A couple of minor i.MX clk data corrections - Update audio clock inverter and fdiv2 flag on Amlogic g12 - Make amlogic clk drivers configurable in Kconfig - Fix Renesas VSP clock names to match corrected hardware documentation - Sigma-delta modulation on Allwinner R40 - Various fixes for at91 clk driver - Use semicolons instead of commas in some places - Mark some variables const so they can move to RO memory -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl+R0K0RHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSU9xw/+KRDZ/xo7GKeC7QrRt4q5eWIW4l/HzjYH yeht/i7cEXy+jSJuOTBj4sIpOdvzdBQfsqMiNg7RKdtYs0HbYFywxWtnvetptuM1 BCgSMDHHJ59EJSPEWAvE6bsl9xaVl4o0XEI2+qAoJ4OIcJVzVz+vRGQ7pDyEk2XT zTXRw4W+HftZXFB8Nw0JTj9YzBoZJzpnAB/vu2HzMYVAvoeQ8RhcdbipdSTjI+zY ++zkt8cmGP0iKloHbi3rk1A7w/ORJ//UjT24xmkwAO6t1CWEErVzXBtGkQ9K4ijy F2w5CzJb/szGCfnGlcchQ5kjB/FfgIKuLNlhTiptY+UZGIvSAbndhMSS3JFsqGbl aYUk5fpjdpneSsIPvHnnz1jIaK6OmHSoxmq7FgwaU+YDX6ZK6UKalMHbHUEpiNX+ 3a+FeKe2IVMZ0uVqpJGnd/o4Kud2CeRM1ufqu15ygbujfSH6xcO7fbUi/C8XJLMX 7PR0Ze0PhwkMezdlxb3WpK+4MrOny3JT0DTAbAQDdAwsKFP/Sex4QMWP8PUdTmGY dQcrgvuXYC1hufOaY1JzxjfGrhEBuJAr7BsjBI+etUpnJ9Z5Uhguti/lnKm7oAlI EceBJ4B5M1iUYTkKXYxLWWzUlkIKNzgHvjRM2Q6Nn5LbyVlzM4i284C/E4M8AmVB nSXy1nWkSAU= =sKI8 -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This contains no changes to the core framework. It is a collection of various clk driver updates. The biggest driver updates in terms of lines of code is the Allwinner driver, closely followed by the Qualcomm and Mediatek drivers. All of those hit high because we add so many lines of clk data. Coming in fourth place is i.MX which also adds a bunch of clk data. This accounts for the new driver additions this time around. Otherwise the patches are lots of little cleanups and fixes for various clk drivers that have baked in linux-next for a while. I suppose one highlight or theme is that more clk drivers are being updated to work as modules, which is interesting to see such critical SoC infrastructure work as a loadable module. New Drivers: - Support qcom SM8150/SM8250 video and display clks - Support Mediatek MT8167 clks - Add clock for CRC block found on vf610 SoCs - Add support for the Renesas R-Car V3U (R8A779A0) SoC - Add support for the VSP for Resizing clock on Renesas RZ/G1H - Support Allwinner A100 SoC clks Removed Drivers: - Remove i.MX21 clock driver, as i.MX21 platform support is being dropped Updates: - Change how qcom's display port clks work - Small non-critical fixes for TI clk driver - Remove various unused variables in clk drivers - Allow Rockchip clk driver to be a module - Remove most __clk_lookup() calls in Samsung drivers (yay!) - Support building i.MX ARMv8 platforms clock driver as module - Some kerneldoc fixes here and there - A couple of minor i.MX clk data corrections - Update audio clock inverter and fdiv2 flag on Amlogic g12 - Make amlogic clk drivers configurable in Kconfig - Fix Renesas VSP clock names to match corrected hardware documentation - Sigma-delta modulation on Allwinner R40 - Various fixes for at91 clk driver - Use semicolons instead of commas in some places - Mark some variables const so they can move to RO memory" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits) clk: imx8mq: Fix usdhc parents order clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: Restrict CLK_HSDK to ARC_SOC_HSDK clk: at91: sam9x60: support only two programmable clocks clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks clk: bcm2835: add missing release if devm_clk_hw_register fails clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name clk: clk-prima2: fix return value check in prima2_clk_init() clk: mmp2: Fix the display clock divider base clk: pxa: Constify static struct clk_ops clk: baikal-t1: Mark Ethernet PLL as critical clk: qoriq: modify MAX_PLL_DIV to 32 clk: axi-clkgen: Set power bits for fractional mode clk: axi-clkgen: Add support for fractional dividers ...	2020-10-22 12:53:28 -07:00
Stephen Boyd	5f56888fad	Merge branches 'clk-ingenic', 'clk-at91', 'clk-kconfig', 'clk-imx', 'clk-qcom', 'clk-prima2' and 'clk-bcm' into clk-next ... - Support qcom SM8150/SM8250 video and display clks - Change how qcom's display port clks work * clk-ingenic: clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks * clk-at91: clk: at91: sam9x60: support only two programmable clocks clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name * clk-kconfig: clk: Restrict CLK_HSDK to ARC_SOC_HSDK * clk-imx: clk: imx8mq: Fix usdhc parents order clk: imx: imx21: Remove clock driver clk: imx: gate2: Fix a few typos clk: imx: Fix and update kerneldoc clk: imx: fix i.MX7D peripheral clk mux flags clk: imx: fix composite peripheral flags clk: imx: Correct the memrepair clock on imx8mp clk: imx: Correct the root clk of media ldb on imx8mp clk: imx: vf610: Add CRC clock clk: imx: Explicitly include bits.h clk: imx8qxp: Support building i.MX8QXP clock driver as module clk: imx8m: Support module build clk: imx: Add clock configuration for ARMv7 platforms clk: imx: Support building i.MX common clock driver as module clk: composite: Export clk_hw_register_composite() clk: imx6sl: Use BIT(x) to avoid shifting signed 32-bit value by 31 bits * clk-qcom: clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: qcom: Add display clock controller driver for SM8150 and SM8250 dt-bindings: clock: add QCOM SM8150 and SM8250 display clock bindings clk: qcom: add video clock controller driver for SM8250 clk: qcom: add video clock controller driver for SM8150 dt-bindings: clock: add SM8250 QCOM video clock bindings dt-bindings: clock: add SM8150 QCOM video clock bindings dt-bindings: clock: combine qcom,sdm845-videocc and qcom,sc7180-videocc clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCs clk/qcom: fix spelling typo clk: qcom: gcc-sdm660: Fix wrong parent_map clk: qcom: dispcc: Update DP clk ops for phy design clk: qcom: gcc-msm8939: remove defined but not used variables clk: qcom: ipq8074: make pcie0_rchng_clk_src static * clk-prima2: clk: clk-prima2: fix return value check in prima2_clk_init() * clk-bcm: clk: bcm2835: add missing release if devm_clk_hw_register fails clk: bcm: rpi: Add register to control pixel bvb clk	2020-10-20 11:47:07 -07:00
Stephen Boyd	3ab9a54f76	Merge branches 'clk-simplify', 'clk-ti', 'clk-tegra', 'clk-rockchip' and 'clk-mediatek' into clk-next ... - Small non-critical fixes for TI clk driver - Support Mediatek MT8167 clks * clk-simplify: clk: mediatek: fix platform_no_drv_owner.cocci warnings clk: mediatek: mt7629: simplify the return expression of mtk_infrasys_init clk: mediatek: mt6797: simplify the return expression of mtk_infrasys_init * clk-ti: clk: ti: dra7: add missing clkctrl register for SHA2 instance clk: ti: clockdomain: fix static checker warning clk: ti: autoidle: add checks against NULL pointer reference clk: keystone: sci-clk: add 10% slack to set_rate clk: keystone: sci-clk: cache results of last query rate operation clk: keystone: sci-clk: fix parsing assigned-clock data during probe * clk-tegra: clk: tegra: Drop !provider check in tegra210_clk_emc_set_rate() * clk-rockchip: clk: rockchip: Initialize hw to error to avoid undefined behavior clk: rockchip: rk3399: Support module build clk: rockchip: fix the clk config to support module build clk: rockchip: Export some clock common APIs for module drivers clk: rockchip: Export rockchip_register_softrst() clk: rockchip: Export rockchip_clk_register_ddrclk() clk: rockchip: Use clk_hw_register_composite instead of clk_register_composite calls clk: rockchip: rk3308: drop unused mux_timer_src_p * clk-mediatek: clk: mediatek: Add MT8167 clock support dt-bindings: clock: mediatek: add bindings for MT8167 clocks clk: mediatek: add UART0 clock support	2020-10-20 11:46:47 -07:00
Stephen Boyd	9d3261628a	Merge branches 'clk-renesas', 'clk-amlogic', 'clk-allwinner', 'clk-samsung', 'clk-doc' and 'clk-unused' into clk-next ... - Remove various unused variables in clk drivers * clk-renesas: clk: renesas: rcar-gen3: Update description for RZ/G2 clk: renesas: cpg-mssr: Add support for R-Car V3U clk: renesas: cpg-mssr: Add register pointers into struct cpg_mssr_priv clk: renesas: cpg-mssr: Use enum clk_reg_layout instead of a boolean flag dt-bindings: clock: renesas,cpg-mssr: Document r8a779a0 dt-bindings: clock: Add r8a779a0 CPG Core Clock Definitions dt-bindings: power: Add r8a779a0 SYSC power domain definitions clk: renesas: rcar-gen2: Rename vsp1-(sy|rt) clocks to vsp(s|r) clk: renesas: r8a7742: Add clk entry for VSPR * clk-amlogic: clk: meson: make shipped controller configurable clk: meson: g12a: mark fclk_div2 as critical clk: meson: axg-audio: fix g12a tdmout sclk inverter clk: meson: axg-audio: separate axg and g12a regmap tables clk: meson: add sclk-ws driver * clk-allwinner: clk: sunxi-ng: sun8i: r40: Use sigma delta modulation for audio PLL clk: sunxi-ng: add support for the Allwinner A100 CCU dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU * clk-samsung: clk: s2mps11: initialize driver via module_platform_driver clk: samsung: Use cached clk_hws instead of __clk_lookup() calls clk: samsung: exynos5420/5250: Add IDs to the CPU parent clk definitions clk: samsung: Add clk ID definitions for the CPU parent clocks clk: samsung: exynos5420: Avoid __clk_lookup() calls when enabling clocks clk: samsung: exynos5420: Add definition of clock ID for mout_sw_aclk_g3d clk: samsung: Keep top BPLL mux on Exynos542x enabled * clk-doc: clk: davinci: add missing kerneldoc clk: fixed: add missing kerneldoc * clk-unused: clk: socfpga: agilex: Remove unused variable 'cntr_mux' clk: si5341: drop unused 'err' variable clk: mmp: pxa1928: drop unused 'clk' variable clk: at91: drop unused at91sam9g45_pcr_layout	2020-10-20 11:46:34 -07:00
Linus Torvalds	38525c6919	power supply and reset changes for the v5.10 series ... power-supply core: * Add wireless type * Properly document current direction battery/charger driver changes: * New fuel-gauge/charger driver for RN5T618/RN5T619 * New charger driver for BQ25980, BQ25975 and BQ25960 * bq27xxx-battery: add support for TI bq34z100 * gpio-charger: convert to GPIO descriptors * gpio-charger: add optional support for charge current limiting * max17040: add support for max17041, max17043, max17044 * max17040: add support for max17048, max17049, max17058, max17059 * smb347-charger: add DT support * smb247-charger: add SMB345 and SMB358 support * simple-battery: add temperature properties * lots of minor fixes, cleanups and DT binding YAML conversions reset drivers: * ocelot: Add support for Sparx5 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAl+IsXoACgkQ2O7X88g7 +prL8RAAprDcwF5irflM2bWwzKnfuNgTjk6P/o9gIWiSJsNA1R3XKJEm6l38givV EhnceGaZXgWg8blh3htd5Z6DNEEFX5ucB9KtQESW5ehM/KGvcEwD7CJilSJejqt4 3AQiFQLa41s4tnBBao/9gp+juSsvwg2NoeCaOa1H2K5oVi7WDmnmQyexa6CAty7b D4Uz8EOfpVi9FvYalffGP7QkA5ZsNWSLRRLJshHCw6QH54+h51F5efhu5S5qxXEA L/yjfFFhiB99df7y4LzvCItfaTGLcLNFfCas4+0yOWnViXosIr9rQk51FihXaDot DBCyF6hHWFDCnymnjMjWclYeatPFw+jnPrjmn+b0mQ/RaTgz30tgvuZurepcCwN/ ZKZftnvN16VAnUYgrE397F706sBZHjE6NonWvpXExawNUznA4h2uTu1bwWhtp5Um gcIjhL0ePEMf1yAYW3iI/l70NfIgPoEep6w+8oyLgV4vvffkKxkHkndoV7ZcS79M OdKbgGq4ZBNTS8ABsjHDO0o+/vBuKa3KE3/2J+916G3mc8FM6WJBfo1mIuwD51GA ASwG4UlE1Kyu91z4rP15GGMwSho7UKvWORB5ECsmfZ8xjiJSRHJAiDhmiaSaZZi0 dc5JKVDdM056IWOuP8THEVG6r3BiG/B1i8eY4YJ6GPv82JP/iks= =QtfI -----END PGP SIGNATURE----- Merge tag 'for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - add wireless type - properly document current direction Battery/charger driver changes: - new fuel-gauge/charger driver for RN5T618/RN5T619 - new charger driver for BQ25980, BQ25975 and BQ25960 - bq27xxx-battery: add support for TI bq34z100 - gpio-charger: convert to GPIO descriptors - gpio-charger: add optional support for charge current limiting - max17040: add support for max17041, max17043, max17044 - max17040: add support for max17048, max17049, max17058, max17059 - smb347-charger: add DT support - smb247-charger: add SMB345 and SMB358 support - simple-battery: add temperature properties - lots of minor fixes, cleanups and DT binding YAML conversions Reset drivers: - ocelot: Add support for Sparx5" * tag 'for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (81 commits) power: reset: POWER_RESET_OCELOT_RESET should depend on Ocelot or Sparx5 power: supply: bq25980: Fix uninitialized wd_reg_val and overrun power: supply: ltc2941: Fix ptr to enum cast power: supply: test-power: revise parameter printing to use sprintf power: supply: charger-manager: fix incorrect check on charging_duration_ms power: supply: max17040: Fix ptr to enum cast power: supply: bq25980: Fix uninitialized wd_reg_val power: supply: bq25980: remove redundant zero check on ret power: reset: ocelot: Add support for Sparx5 dt-bindings: reset: ocelot: Add Sparx5 support power: supply: sbs-battery: keep error code when get_property() fails power: supply: bq25980: Add support for the BQ259xx family dt-binding: bq25980: Add the bq25980 flash charger power: supply: fix spelling mistake "unprecise" -> "imprecise" power: supply: test_power: add missing newlines when printing parameters by sysfs power: supply: pm2301: drop duplicated i2c_device_id power: supply: charger-manager: drop unused charger assignment power: supply: rt9455: skip 'struct acpi_device_id' when !CONFIG_ACPI power: supply: goldfish: skip 'struct acpi_device_id' when !CONFIG_ACPI power: supply: bq25890: skip 'struct acpi_device_id' when !CONFIG_ACPI ...	2020-10-20 10:56:34 -07:00
Linus Torvalds	c48b75b727	sound updates for 5.10 ... The amount of changes is smaller at this round (what a surprise), but lots of activity is seen. Most of changes are about ASoC driver development, especially Intel platforms. Here are some highlights: General: * Replace all tasklet usages with other alternatives * Cleanup of the ASoC error unwinding code * Fixes for trivial issues caught by static checker * Spell fixes allover the places ALSA Core: * Lockdep fix for control devices * Fix for potential OSS sequencer mutex stalls HD-audio and USB-audio: * SoundBlaster AE-7 support * Changes in quirk table for the rename handling * Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2. ASoC: * Lots of updates for Intel SOF and SoundWire enablement * Replacement of the DSP driver for some older x86 systems; the new code was written from scratch, better maintenance expected * Helpers for parsing auxiluary devices from the device tree * New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359 Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas Instruments J721E, TAS2110, TAS2564 and TAS2764 -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl+HHD4OHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE9eAw//Wgs9LfQE3rBcsGVNTHimW2cPzbdHVK1eth6N pFT6rdEG2N+ALR0ESA26CSBniJocqxNvXYzaYT0fy+7tS/chOjhkfr6SttYPDmwc q2u1SQIqdx41Q0DVUXYxSLVExjT4Rx96qeibLy5pi8DsbL0DOVa7PkVDl1XHXNJ0 iSZwA18gCRdezpoOCD+UF8EBplULjYfPp0xstqjaQzTCpJQ5C1xpbZdHWfhTWsKo H98d4GL4yUUbJb5/Wi7uqiUGhPIxgBUMVkaY+uRifeNA/MGD5rUZQaf8ft6uQFUL D5RCUksJiQfyrj++g9/mzOWVRCFZ6MvaAmEW4xwlPvTsP2uIVIqS5RH8Z2BhwjXr J8/4gPuCtoEKbfsOOCOG9MlGsquf9LBeiH5KZ7gqb7ilu4tICR2zXtBr6U7e64Wd LsPROQnr/+lxIlEJjlhiarf1jXMfo4glxuoLsDcIH+Baf0lTiMNoBVIZTUdJ0urq Srh++Bk/WGvoVJe1PHp7IfhZCoBACozPXq7EifbnCsUM+cVtQtjWrydyi8k/Yona 5EfS5wQdEH6JvQirkmGJm8kNMu+e3hW2HzoJqV2Z2DUMMnCSra62KD0wPA/wRchu mkC47875a+jgo58fq4bX9hzGi2CrE/TMYdii6I2bbAm/Mp7czXZfO0LOTWDc4Bs5 T8qt+HI= =nWAp -----END PGP SIGNATURE----- Merge tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "The amount of changes is smaller at this round (what a surprise), but lots of activity is seen. Most of changes are about ASoC driver development, especially Intel platforms. Here are some highlights: General: - Replace all tasklet usages with other alternatives - Cleanup of the ASoC error unwinding code - Fixes for trivial issues caught by static checker - Spell fixes allover the places ALSA Core: - Lockdep fix for control devices - Fix for potential OSS sequencer mutex stalls HD-audio and USB-audio: - SoundBlaster AE-7 support - Changes in quirk table for the rename handling - Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2. ASoC: - Lots of updates for Intel SOF and SoundWire enablement - Replacement of the DSP driver for some older x86 systems; the new code was written from scratch, better maintenance expected - Helpers for parsing auxiluary devices from the device tree - New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359 Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas Instruments J721E, TAS2110, TAS2564 and TAS2764" * tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (498 commits) ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close ALSA: hda: fix jack detection with Realtek codecs when in D3 ALSA: fireworks: use semicolons rather than commas to separate statements ALSA: hda: use semicolons rather than commas to separate statements ALSA: hda/i915 - fix list corruption with concurrent probes ASoC: dmaengine: Document support for TX only or RX only streams ASoC: mchp-spdiftx: remove 'TX' from playback stream name ASoC: ti: davinci-mcasp: Use &pdev->dev for early dev_warn ASoC: tas2764: Add the driver for the TAS2764 dt-bindings: tas2764: Add the TAS2764 binding doc ASoC: Intel: catpt: Add explicit DMADEVICES kconfig dependency ASoC: Intel: catpt: Fix compilation when CONFIG_MODULES is disabled ASoC: stm32: dfsdm: add actual resolution trace ASoC: stm32: dfsdm: change rate limits ASoC: qcom: sc7180: Add support for audio over DP Asoc: qcom: lpass-platform : Increase buffer size ASoC: qcom: Add support for lpass hdmi driver Asoc: qcom: lpass:Update lpaif_dmactl members order Asoc:qcom:lpass-cpu:Update dts property read API ASoC: dt-bindings: Add dt binding for lpass hdmi ...	2020-10-15 11:07:44 -07:00
Linus Torvalds	726eb70e0d	Char/Misc driver patches for 5.10-rc1 ... Here is the big set of char, misc, and other assorted driver subsystem patches for 5.10-rc1. There's a lot of different things in here, all over the drivers/ directory. Some summaries: - soundwire driver updates - habanalabs driver updates - extcon driver updates - nitro_enclaves new driver - fsl-mc driver and core updates - mhi core and bus updates - nvmem driver updates - eeprom driver updates - binder driver updates and fixes - vbox minor bugfixes - fsi driver updates - w1 driver updates - coresight driver updates - interconnect driver updates - misc driver updates - other minor driver updates All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4g8YQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yngKgCeNpArCP/9vQJRK9upnDm8ZLunSCUAn1wUT/2A /bTQ42c/WRQ+LU828GSM =6sO2 -----END PGP SIGNATURE----- Merge tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char, misc, and other assorted driver subsystem patches for 5.10-rc1. There's a lot of different things in here, all over the drivers/ directory. Some summaries: - soundwire driver updates - habanalabs driver updates - extcon driver updates - nitro_enclaves new driver - fsl-mc driver and core updates - mhi core and bus updates - nvmem driver updates - eeprom driver updates - binder driver updates and fixes - vbox minor bugfixes - fsi driver updates - w1 driver updates - coresight driver updates - interconnect driver updates - misc driver updates - other minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits) binder: fix UAF when releasing todo list docs: w1: w1_therm: Fix broken xref, mistakes, clarify text misc: Kconfig: fix a HISI_HIKEY_USB dependency LSM: Fix type of id parameter in kernel_post_load_data prototype misc: Kconfig: add a new dependency for HISI_HIKEY_USB firmware_loader: fix a kernel-doc markup w1: w1_therm: make w1_poll_completion static binder: simplify the return expression of binder_mmap test_firmware: Test partial read support firmware: Add request_partial_firmware_into_buf() firmware: Store opt_flags in fw_priv fs/kernel_file_read: Add "offset" arg for partial reads IMA: Add support for file reads without contents LSM: Add "contents" flag to kernel_read_file hook module: Call security_kernel_post_load_data() firmware_loader: Use security_post_load_data() LSM: Introduce kernel_post_load_data() hook fs/kernel_read_file: Add file_size output argument fs/kernel_read_file: Switch buffer size arg to size_t fs/kernel_read_file: Remove redundant size argument ...	2020-10-15 10:01:51 -07:00
Linus Torvalds	c6dbef7307	USB/PHY/Thunderbolt driver patches for 5.10-rc1 ... Here is the big set of USB, PHY, and Thunderbolt driver updates for 5.10-rc1. Lots of tiny different things for these subsystems are in here, including: - phy driver updates - thunderbolt / USB 4 updates and additions - USB gadget driver updates - xhci fixes and updates - typec driver additions and updates - api conversions to various drivers for core kernel api changes - new USB control message functions to make it harder to get wrong, as found by syzbot (took 2 tries to get it right) - lots of tiny USB driver fixes and updates all over the place All of these have been in linux-next for a while, with the exception of the last "obviously correct" patch that updated a FALLTHROUGH comment that got merged last weekend. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4hAAg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykfRACcCp48StLg4V7XcZ41eQYES/DVwxkAnjnZs+La Y7F+o2p8DiuLLQamdEyB =lHr1 -----END PGP SIGNATURE----- Merge tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY/Thunderbolt driver updates from Greg KH: "Here is the big set of USB, PHY, and Thunderbolt driver updates for 5.10-rc1. Lots of tiny different things for these subsystems are in here, including: - phy driver updates - thunderbolt / USB 4 updates and additions - USB gadget driver updates - xhci fixes and updates - typec driver additions and updates - api conversions to various drivers for core kernel api changes - new USB control message functions to make it harder to get wrong, as found by syzbot (took 2 tries to get it right) - lots of tiny USB driver fixes and updates all over the place All of these have been in linux-next for a while, with the exception of the last "obviously correct" patch that updated a FALLTHROUGH comment that got merged last weekend" * tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits) usb: musb: gadget: Use fallthrough pseudo-keyword usb: typec: Add QCOM PMIC typec detection driver USB: serial: option: add Cellient MPL200 card usb: typec: tcpci_maxim: Add support for Sink FRS usb: typec: tcpci: Implement callbacks for FRS usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS) usb: typec: tcpci_maxim: Chip level TCPC driver usb: typec: tcpci: Add set_vbus tcpci callback usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled usb: cdc-acm: add quirk to blacklist ETAS ES58X devices USB: serial: ftdi_sio: use cur_altsetting for consistency USB: serial: option: Add Telit FT980-KS composition USB: core: remove polling for /sys/kernel/debug/usb/devices usb: typec: add support for STUSB160x Type-C controller family usb: typec: add typec_find_pwr_opmode usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema usb: dwc2: Fix INTR OUT transfers in DDMA mode. ...	2020-10-15 09:51:18 -07:00
Linus Torvalds	b4e1bce85f	Pin control bulk changes for the v5.10 kernel cycle ... Core changes: - NONE whatsoever, we don't even touch the core files this time around. New drivers: - New driver for the Toshiba Visconti SoC. - New subdriver for the Qualcomm MSM8226 SoC. - New subdriver for the Actions Semiconductor S500 SoC. - New subdriver for the Mediatek MT8192 SoC. - New subdriver for the Microchip SAMA7G5 SoC. Driver enhancements: - Intel Cherryview and Baytrail cleanups and refactorings. - Enhanced support for the Renesas R8A7790, more pins and groups. - Some optimizations for the MCP23S08 MCP23x17 variant. - Some cleanups around the Actions Semiconductor subdrivers. - A bunch of cleanups around the SH-PFC and Emma Mobile drivers. - The "SH-PFC" (literally SuperH pin function controller, I think) subdirectory is now renamed to the more neutral "renesas", as these are not very much centered around SuperH anymore. - Non-critical fixes for the Aspeed driver. - Non-critical fixes for the Ingenic (MIPS!) driver. - Fix a bunch of missing pins on the AMD pinctrl driver. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl+G8G0ACgkQQRCzN7AZ XXMAVw/+MBb0vaQKsD3ezoIeS6Pb8urDxnE7/A+IpU90coBFp+DbJIzTMbKhUb2L z72dAUB6zadQxPwruAt22TO81hmVwOGgqp6c/Z4G+BRDg9/GXVwEidnQqwXY7KWn zD0eJxzBxlXv76QHlJ2rT4YI9q2IhxAV1yIW638vsrLC+HZEnxKTL9U8Yx2f7ybq aCKPNPERo9oMIz+xuqpbHVeR2A2KpCAGRqCYw3Br+y4fnfkkEl7+0M5jKpBYU4yu NzTz7p0dlbeWEAhRMJCHx8wuSbV46k+AAjopJESMiaXlbS51cv+MF7p0NXhZHmNg ib6RivRZnQ2tFfznk9b6BXNywUGjUNUFWJrDrbDcbXR/k8XQtE+Hs6UQF1nuLWGS ZOppeFu2blJKyqFYMu4sT+d8fF7YNtU0TyVl2A60hg1Ef9ygGuiIASe9Pv2lgcRQ 7M94yh264oc1yEF+IUi8VeMypVg9ckklNWzacQ6oritluTR8mTk1eAFqHATi7g3W 4R3BSsBNtOySEoZS3I73HFdCuzBvXyfVTZz+iLAv2u9iVXd5kINhCxAFl9o2sEOH G6jvqxijP1hBQTCKyFGzNgHGGwsyvRYbMS9Oog1uKMTIk4yP0wy60LY7OE78HKKh uMOEbmE8bn8+oRl0z3QLttZssllFgYiruwNN2TGXUwBr868z+W0= =TdjX -----END PGP SIGNATURE----- Merge tag 'pinctrl-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - NONE whatsoever, we don't even touch the core files this time around. New drivers: - New driver for the Toshiba Visconti SoC. - New subdriver for the Qualcomm MSM8226 SoC. - New subdriver for the Actions Semiconductor S500 SoC. - New subdriver for the Mediatek MT8192 SoC. - New subdriver for the Microchip SAMA7G5 SoC. Driver enhancements: - Intel Cherryview and Baytrail cleanups and refactorings. - Enhanced support for the Renesas R8A7790, more pins and groups. - Some optimizations for the MCP23S08 MCP23x17 variant. - Some cleanups around the Actions Semiconductor subdrivers. - A bunch of cleanups around the SH-PFC and Emma Mobile drivers. - The "SH-PFC" (literally SuperH pin function controller, I think) subdirectory is now renamed to the more neutral "renesas", as these are not very much centered around SuperH anymore. - Non-critical fixes for the Aspeed driver. - Non-critical fixes for the Ingenic (MIPS!) driver. - Fix a bunch of missing pins on the AMD pinctrl driver" * tag 'pinctrl-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (78 commits) pinctrl: amd: Add missing pins to the pin group list dt-bindings: pinctrl: sunxi: Allow pinctrl with more interrupt banks pinctrl: visconti: PINCTRL_TMPV7700 should depend on ARCH_VISCONTI pinctrl: mediatek: Free eint data on failure pinctrl: single: fix debug output when #pinctrl-cells = 2 pinctrl: single: fix pinctrl_spec.args_count bounds check pinctrl: sunrisepoint: Modify COMMUNITY macros to be consistent pinctrl: cannonlake: Modify COMMUNITY macros to be consistent pinctrl: tigerlake: Fix register offsets for TGL-H variant pinctrl: Document pinctrl-single,pins when #pinctrl-cells = 2 pinctrl: mediatek: use devm_platform_ioremap_resource_byname() pinctrl: nuvoton: npcm7xx: Constify static ops structs pinctrl: mediatek: mt7622: add antsel pins/groups pinctrl: ocelot: simplify the return expression of ocelot_gpiochip_register() pinctrl: at91-pio4: add support for sama7g5 SoC dt-bindings: pinctrl: at91-pio4: add microchip,sama7g5 pinctrl: spear: simplify the return expression of tvc_connect() pinctrl: spear: simplify the return expression of spear310_pinctrl_probe pinctrl: sprd: use module_platform_driver to simplify the code pinctrl: Ingenic: Add I2S pins support for Ingenic SoCs. ...	2020-10-14 15:25:04 -07:00
Linus Torvalds	531d29b0b6	IOMMU Updates for Linux v5.10 ... Including: - ARM-SMMU Updates from Will: - Continued SVM enablement, where page-table is shared with CPU - Groundwork to support integrated SMMU with Adreno GPU - Allow disabling of MSI-based polling on the kernel command-line - Minor driver fixes and cleanups (octal permissions, error messages, ...) - Secure Nested Paging Support for AMD IOMMU. The IOMMU will fault when a device tries DMA on memory owned by a guest. This needs new fault-types as well as a rewrite of the IOMMU memory semaphore for command completions. - Allow broken Intel IOMMUs (wrong address widths reported) to still be used for interrupt remapping. - IOMMU UAPI updates for supporting vSVA, where the IOMMU can access address spaces of processes running in a VM. - Support for the MT8167 IOMMU in the Mediatek IOMMU driver. - Device-tree updates for the Renesas driver to support r8a7742. - Several smaller fixes and cleanups all over the place. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAl+Fy9MACgkQK/BELZcB GuNxtRAA0TdYHXt6XyLWmvRAX/ySZSz6KOneZWWwpsQ9wh2/iv1PtBsrV0ltf+6g CaX4ROZUVRbV9wPD+7maBRbzxrG3QhfEaaV+K45Q2J/QE1wjkyV8qj1eORWTUUoc nis4FhGDKk2ER/Gsajy2Hjs4+6i43gdWG/+ghVGaCRo8mCZyoz1/6AyMQyN3deuO NqWOv9E7hsavZjRs/w/LXG7eSE20cZwtt//kPVJF0r9eQqC6i1eJDQj48iRqJVqd R0dwBQZaLz++qQptyKebDNlmH/3aAsb+A8nCeS7ZwHqWC1QujTWOUYWpFyPPbOmC KVsQXzTzRfnVTDECF1Pk5d3yi45KILLU3B4zDJfUJjbL3KDYjuVUvhHF/pcGcjC3 H1LWJqHSAL8sJwHvKhpi0VtQ5SOxXnLO5fGG/CZT/Xb4QyM+mkwkFLdn1TryZTR/ M4XA+QuI96TzY7HQUJdSoEDANxoBef6gPnxdDKOnK1v4hfNsPAl7o8hZkM3w0DK8 GoFZUV+vjBhFcymGcQegSNiea28Hfi+hBe+PPHCmw+tJm47cketD5uP5jJ5NGaUe MKU/QXWXc6oqeBTQT6ki5zJbJXKttbPa8eEmp+FrMatc9kruvBVhQoMbj7Vd3CA1 dC4zK9Awy7yj24ZhZfnAFx2DboCmBTUI3QKjDt9K5PRZyMeyoP8= =C0Sg -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - ARM-SMMU Updates from Will: - Continued SVM enablement, where page-table is shared with CPU - Groundwork to support integrated SMMU with Adreno GPU - Allow disabling of MSI-based polling on the kernel command-line - Minor driver fixes and cleanups (octal permissions, error messages, ...) - Secure Nested Paging Support for AMD IOMMU. The IOMMU will fault when a device tries DMA on memory owned by a guest. This needs new fault-types as well as a rewrite of the IOMMU memory semaphore for command completions. - Allow broken Intel IOMMUs (wrong address widths reported) to still be used for interrupt remapping. - IOMMU UAPI updates for supporting vSVA, where the IOMMU can access address spaces of processes running in a VM. - Support for the MT8167 IOMMU in the Mediatek IOMMU driver. - Device-tree updates for the Renesas driver to support r8a7742. - Several smaller fixes and cleanups all over the place. * tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (57 commits) iommu/vt-d: Gracefully handle DMAR units with no supported address widths iommu/vt-d: Check UAPI data processed by IOMMU core iommu/uapi: Handle data and argsz filled by users iommu/uapi: Rename uapi functions iommu/uapi: Use named union for user data iommu/uapi: Add argsz for user filled data docs: IOMMU user API iommu/qcom: add missing put_device() call in qcom_iommu_of_xlate() iommu/arm-smmu-v3: Add SVA device feature iommu/arm-smmu-v3: Check for SVA features iommu/arm-smmu-v3: Seize private ASID iommu/arm-smmu-v3: Share process page tables iommu/arm-smmu-v3: Move definitions to a header iommu/io-pgtable-arm: Move some definitions to a header iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer iommu/amd: Re-purpose Exclusion range registers to support SNP CWWB iommu/amd: Add support for RMP_PAGE_FAULT and RMP_HW_ERR iommu/amd: Use 4K page for completion wait write-back semaphore iommu/tegra-smmu: Allow to group clients in same swgroup iommu/tegra-smmu: Fix iova->phys translation ...	2020-10-14 12:08:34 -07:00
Jonathan Marek	d05a58047c	dt-bindings: clock: add QCOM SM8150 and SM8250 display clock bindings ... Add device tree bindings for display clock controller for Qualcomm Technology Inc's SM8150 and SM8250 SoCs. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (SM8250) Link: https://lore.kernel.org/r/20200927190653.13876-2-jonathan@marek.ca Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-10-13 18:18:06 -07:00
Jonathan Marek	dafb992a95	dt-bindings: clock: add SM8250 QCOM video clock bindings ... Add device tree bindings for video clock controller for SM8250 SoCs. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200923160635.28370-4-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-10-13 18:05:04 -07:00
Jonathan Marek	df3f61d2cd	dt-bindings: clock: add SM8150 QCOM video clock bindings ... Add device tree bindings for video clock controller for SM8150 SoCs. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200923160635.28370-3-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-10-13 18:05:03 -07:00
Konrad Dybcio	8c18b41b39	clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCs ... This change adds GDSCs, resets and most of the missing clocks to the msm8994 GCC driver. The remaining ones are of local_vote_clk and gate_clk type, which are not yet supported upstream. Also reorder them to match the original downstream driver. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20201005145855.149206-1-konradybcio@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-10-13 18:04:36 -07:00
Fabien Parent	8adea9b945	dt-bindings: clock: mediatek: add bindings for MT8167 clocks ... Add binding documentation for topckgen, apmixedsys, infracfg, audsys, imgsys, mfgcfg, vdecsys on MT8167 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200918132303.2831815-1-fparent@baylibre.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2020-10-13 15:46:01 -07:00
V Sujith Kumar Reddy	12fbfc4cab	ASoC: Add sc7180-lpass binding header hdmi define ... Add header defining hdmi dai-id for SC7180 lpass soc in dt bindings. Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/1602134223-2562-2-git-send-email-srivasam@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>	2020-10-08 20:27:30 +01:00
Olof Johansson	c8952516e8	Reset controller updates for v5.10 ... This tag allows to build reset-imx7 as a module, and adds support to reset the Cortex-M4 processor on i.MX8MQ to it, adds support for the Versal platform to the reset-zynqmp driver, and fixes some kerneldoc comments in the core and in sti/reset-syscfg. -----BEGIN PGP SIGNATURE----- iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCX2tCQxcccC56YWJlbEBw ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwNnQAQDnOhM1615HbwZ0YZM+jHC8U8+e DfzXfsANHTffGJ4kZQEA1Z9uELtzsgQrrrtq3PaVVbYXGUcv2enMAO1AUD/0jwQ= =zNMu -----END PGP SIGNATURE----- Merge tag 'reset-for-v5.10' of git://git.pengutronix.de/pza/linux into arm/drivers Reset controller updates for v5.10 This tag allows to build reset-imx7 as a module, and adds support to reset the Cortex-M4 processor on i.MX8MQ to it, adds support for the Versal platform to the reset-zynqmp driver, and fixes some kerneldoc comments in the core and in sti/reset-syscfg. * tag 'reset-for-v5.10' of git://git.pengutronix.de/pza/linux: reset: sti: reset-syscfg: fix struct description warnings reset: imx7: add the cm4 reset for i.MX8MQ dt-bindings: reset: imx8mq: add m4 reset reset: Fix and extend kerneldoc reset: reset-zynqmp: Added support for Versal platform dt-bindings: reset: Updated binding for Versal reset driver reset: imx7: Support module build Link: https://lore.kernel.org/r/2b77c90d2b970eb8fa09000b9ecb564bffa76374.camel@pengutronix.de Signed-off-by: Olof Johansson <olof@lixom.net>	2020-10-03 13:02:08 -07:00
Olof Johansson	e863e45ef9	soc: amlogic: driver updates for v5.10 ... - misc. pm-domain updates -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl9t/SQACgkQWTcYmtP7 xmWodQ/+JXt8MojIkCB5+/RmDGpM44cyviNfzG99giyVhtQFtC/N4P3ClOBvjOeC L8dBUjmNccVLgslqzJ8Ok7Vvhwcl5CCcp5MF6TU+RWyod6U5LZkS2dQPhqmBpmSX 0FEPz/S7rscwO4klyXzyYDheqSzNSElDaOSdXd16Qol798LxqzM4Uxe6v9Ur7O4H ikLVxvzFlzm6P1/gc6n0C+vphrH8SHME0uOg+AQlqKdV28Oi2kWqYgkDMa0UPUUU m2sVaaPH3hGkY88IOb0xUm3LFGfqIOrIvvn+QbRxQFT8Pk3p4H73P4FvAk9Bm4xp xQ5eBAkVtTV/eUp7jODXC1yl5PJRoRvWCbssQWepKmLqWW8h4dlyWN5LvF4XTkTe SG9pAN7KCZZLSR9N9t9IseqCMa5K+p7cmn12oe43mmbgrXYfXTqYrTl75DYOoEaW 8czM3RpQhp4Qx3AHpHR4pCxPIeCYazP84y3B/dBGVbRJUouECLwSGNzKh/zwk9nB v+sYSjtIGcqC13BPBWWwNHWOdYF3uGHPKWXiSrzpc7jKeAdKAC/l82Nf3hlLlnYz X3AVCTfP/fFgMjpgXQo+Edl6s5G1Us7Wel5kZ/2Ku9+8uknga2DrGvOjORjbsx9d Q37dqA39zYv5GFh3aaw8siLHz71/JlMd+a5ZmrWZQAEj2YBxas8= =8Lm1 -----END PGP SIGNATURE----- Merge tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers soc: amlogic: driver updates for v5.10 - misc. pm-domain updates * tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: soc: amlogic: pm-domains: use always-on flag soc: amlogic: meson-ee-pwrc: add support for the Meson AXG SoCs dt-bindings: power: amlogic, meson-ee-pwrc: add Amlogic AXG power controller bindings Link: https://lore.kernel.org/r/7hblhukjzx.fsf@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net>	2020-10-03 13:00:56 -07:00
Olof Johansson	6869f774b1	Two regression fixes for omaps ... Fix AM33XX_IOPAD macro that broke after recent pinctrl changes to use #pinctrl-cells = 2. And fix omap_enter_idle_coupled() for cases where cpu_cluster_pm_enter() returns an error as otherwise we may end up wrongly idling the MPU domain on the next WFI. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl91oP4RHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXNjyQ/+O5YLq9sOHq4QS5HD8xbopZ6RZsGiodwo RDuKINgh24kfRsAJGJ/GTN8rq0H1Mf86kviXWl7xE7PElFGRNzk1R9YmiJKfwjDf xKm7WuEipfxG18CMjp2XFPq+/1ANbnKyRVR/zq/uSInDvIcxuQlz4OrrrkR/MCOv PL34VVD0k2XaA5cQc62jyZXsWLja7xflG6+wkSmx5GvLoa4kDAfCyPXx+e+21WPH PvMgO4G2VKsUrzevSCg4B3oqW1HtreBO3uhp71C1UBrUI7xaBqJPifoZ/DusI60s 5MNqVu+cbOOfP3h1VHYfPKfqrduaWqfxWhe81TShEiz6J9HoHHnTg2jt7R854o8Q nvpNV8Kwbf8huTamIm1//itNHeuex1eGeWPbdjNR3wz4Fv6qYVV3UbKACRgmkAHm nRrS7KOwBs1a9NGoST2gex05NhfAdw7RInRXoI/7YRsgC1eTwmABaX9lYpueFS7g BO/IlLI5PFaGDDDz8VYeT1VAzpkEf/nwIfLcIVCOpXpwenXmQHZHgeEYpM91omLs u2csHQEEhmbDuPX/dJKsPJIUQ7eHZWhlLx8zl4FEYCmLlremVyD4ll1QpXtP/XdD k8+rJqFn35CuR8nqeMUdLt9cs2+Ch/VK7+83FuiBnm/CdnEwxY/zByv6CSCYyhxI EnRILdVOEO0= =sdtl -----END PGP SIGNATURE----- Merge tag 'omap-for-v5.9/fixes-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Two regression fixes for omaps Fix AM33XX_IOPAD macro that broke after recent pinctrl changes to use #pinctrl-cells = 2. And fix omap_enter_idle_coupled() for cases where cpu_cluster_pm_enter() returns an error as otherwise we may end up wrongly idling the MPU domain on the next WFI. * tag 'omap-for-v5.9/fixes-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2 Link: https://lore.kernel.org/r/pull-1601544624-617679@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>	2020-10-03 12:45:12 -07:00
Olof Johansson	ef3c139ba0	Second and final device tree updates towards 5.10-rc1 for TI K3 platform. ... -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAl93K8EACgkQ3bWEnRc2 JJ1hhQ/+Kaak1RosL3a0AZ4tBPAkWm/CVduyKOxLZahBfHzD2pZkHhKyfwGBRFOn CoLCMTMrY19xnOkUYzUTu5bkoxvLI1YuAkvYG/Sx6yBZU4ImTlVpzmmkeE4nJYBI X8Z+oysSx7kgTVxmPbweDPVtUJ99G4yhWNlFp+v2rfWM+mCK6d6ELZkkJVQBS18l iD8rYlL9885CsowILycWGZ855z59DLxeIqy52K62+rhDaOgYz56ZnNYhWg+5RDPB ZOAvXhtMJHVUekorqD6i9FQqWfVda0rTR+KiDz4UBn8NLyFmmGbArl3bQ4CMg9+q Chm6Ri9f46uZYZU9bNny9rZtYfu5z6rvAS+kDaq3BwumMcSdy/ULjgP8UR0XJfHS sLWw1OmDHYf7V9YUXxKemSwySCKVbgoIwzZPu006fNovXKETsTi/Hu70EWEepkRF aLnjLqSxNBkdwQYy04bSzchPOaHLWWBNAczWABAQvg6pRvTQbK6+mGHnTheIM5Ve GH/qeVNWdhurVXlm76i8bHS7oBTfSSia2VVKZSuQOplruwjC8DHKkTeaMxDtXieX 1qGfT6jimkduTmzzW+u7OMc4TsP/PCsaFh5qk7QrmqvrXhQWJouCOuso/7LyTwqK 4rAN0LSq1kosDFjKCeEBsJ6uhc85DjNBYVFfftvhZDN2tFwJNr0= =tuvx -----END PGP SIGNATURE----- Merge tag 'ti-k3-dt-for-v5.10-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dt Second and final device tree updates towards 5.10-rc1 for TI K3 platform. * tag 'ti-k3-dt-for-v5.10-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (23 commits) arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC arm64: dts: ti: k3-j721e-common-proc-board: align GPIO hog names with dtschema arm64: dts: ti: k3-j7200-common-proc-board: Add support for eMMC and SD card arm64: dts: ti: k3-j7200-main: Add support for MMC/SD controller nodes arm64: dts: ti: k3-j7200-som-p0: Add HyperFlash node arm64: dts: ti: k3-j7200-mcu-wakeup: Add HyperBus node arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders arm64: dts: ti: k3-j7200: Add I2C nodes arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux and phy defs arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node arm64: dts: ti: k3-j7200-main: add main navss cpts node arm64: dts: ti: k3-j7200: add DMA support arm64: dts: ti: Add support for J7200 Common Processor Board arm64: dts: ti: Add support for J7200 SoC dt-bindings: arm: ti: Add bindings for J7200 SoC ... Link: https://lore.kernel.org/r/20201002134559.orvmgbns57qlyn3i@akan Signed-off-by: Olof Johansson <olof@lixom.net>	2020-10-03 12:16:18 -07:00
Greg Kroah-Hartman	9f76e198dd	phy for 5.9 ... - Core: - New PHY attribute for max_link_rate - New phy drivers: - Rockchip dphy driver moved from staging - Socionext UniPhier AHCI PHY driver - Intel LGM SoC USB phy - Intel Keem Bay eMMC PHY driver - Updates: - Support for imx8mp usb phy - Support for DP Phy and USB3+DP combo phy in QMP driver - Support for Qualcomm sc7180 DP phy - Support for cadence torrent PCIe and USB single linke and multilink configurations along with USB, SGMII/QSGMII configurations -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl929+AACgkQfBQHDyUj g0cyqQ/+OGgTU1pbJdUAztYWnIy1q3g4Y39Kc9iAwuHrl3g9DB65JakJrnBvPjwL cSwdKHZbWHVAyDGIRjnroUqJ1EzOFsFubSmZ444oQdRAIB+wz1MBhD+ntiw172nX LFe1hQYCuLM2Vzkzs3OTdCLBDuoZd8JHeZzV/RVzQAHshnRAoim2Wfh+/k/YWjwB g1YB5ylsCH9MmsJBsvf5QEOwKyfDhmyEUdeFI1uQt7LipQ8uhjg0/Mg8Jc5D5aRi kqUN8y7UrJ7Tyc1tradt700zg4gnI240VLPdb0pyxcvm5H6lTVrzZGgJuVHeWYG/ JMdrB9+ZMC5yfiAtiKFjeUikYQr+RqDfR3iNk683k8k9G/0VjFJtC53pTHSVdMO5 SfijP2iIRsnAU+iVJ576/eXPlOeUqacjWQRndbkXTHH5zfp0e2cmEKAczTxC7ACA 3FpakddNy54wRDjAQW2/YL76gf2HD05ud6OOi40Ohc1Wd0EErLjcMhdPf59KPSMQ 9kOLrDXbYIwVB+s2ecDjxpacqugfmlFQztFuPYapukRvQHqwYhjqfqcSWJHL2cZe WRwJ9Qc6V7OklFU1MmiVhZn3H5Xr6xitK4+XKKP6FtU42TaJ4f9e71JECo5eGo9d b+4nRrm7AirIJ9R2dXiKOvzY0iYNrGPmHccVUfJLhlJVWU6szbE= =U0WQ -----END PGP SIGNATURE----- Merge tag 'phy-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into usb-next Vinod writes: phy for 5.9 - Core: - New PHY attribute for max_link_rate - New phy drivers: - Rockchip dphy driver moved from staging - Socionext UniPhier AHCI PHY driver - Intel LGM SoC USB phy - Intel Keem Bay eMMC PHY driver - Updates: - Support for imx8mp usb phy - Support for DP Phy and USB3+DP combo phy in QMP driver - Support for Qualcomm sc7180 DP phy - Support for cadence torrent PCIe and USB single linke and multilink configurations along with USB, SGMII/QSGMII configurations * tag 'phy-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits) phy: qcom-qmp: initialize the pointer to NULL phy: qcom-qmp: Add support for sc7180 DP phy phy: qcom-qmp: Add support for DP in USB3+DP combo phy phy: qcom-qmp: Use devm_platform_ioremap_resource() to simplify phy: qcom-qmp: Get dp_com I/O resource by index phy: qcom-qmp: Move 'serdes' and 'cfg' into 'struct qcom_phy' phy: qcom-qmp: Remove 'initialized' in favor of 'init_count' phy: qcom-qmp: Move phy mode into struct qmp_phy dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy information dt-bindings: phy: ti,phy-j721e-wiz: fix bindings for torrent phy dt-bindings: phy: cdns,torrent-phy: add reset-names phy: rockchip-dphy-rx0: Include linux/delay.h phy: fix USB_LGM_PHY warning & build errors phy: cadence-torrent: Add USB + SGMII/QSGMII multilink configuration phy: cadence-torrent: Add PCIe + USB multilink configuration phy: cadence-torrent: Add single link USB register sequences phy: cadence-torrent: Add single link SGMII/QSGMII register sequences phy: cadence-torrent: Configure PHY_PLL_CFG as part of link_cmn_vals phy: cadence-torrent: Add PHY link configuration sequences for single link phy: cadence-torrent: Add clk changes for multilink configuration ...	2020-10-02 13:45:00 +02:00
Roger Quadros	ba90e0c926	dt-bindings: ti-serdes-mux: Add defines for J7200 SoC ... There are 4 lanes in each J7200 SERDES. Each SERDES lane mux can select upto 4 different IPs. Define all the possible functions. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Peter Rosin <peda@axentia.se> Cc: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/20200930122032.23481-2-rogerq@ti.com	2020-09-30 07:34:02 -05:00
Olof Johansson	802b26b3c2	Renesas driver updates for v5.10 (take two) ... - Add core support for the R-Car V3U (R8A779A0) SoC, including System Controller (SYSC) and Reset (RST) support, - Various Kconfig cleanups. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX2ShfwAKCRCKwlD9ZEnx cO6bAP4kuetjBmf+BxLGRxZTEin+8YQRd7p051UZKBMa4qp2lwD+JKhnasH1qv64 CWS3LV8FNumj2Gr1e3YdJcgwb+9p3gc= =K/tj -----END PGP SIGNATURE----- Merge tag 'renesas-drivers-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers Renesas driver updates for v5.10 (take two) - Add core support for the R-Car V3U (R8A779A0) SoC, including System Controller (SYSC) and Reset (RST) support, - Various Kconfig cleanups. * tag 'renesas-drivers-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: soc: renesas: r8a779a0-sysc: Add r8a779a0 support soc: renesas: rcar-rst: Add support for R-Car V3U soc: renesas: Identify R-Car V3U soc: renesas: Sort driver description title soc: renesas: Use ARM32/ARM64 for menu description dt-bindings: clock: Add r8a779a0 CPG Core Clock Definitions dt-bindings: power: Add r8a779a0 SYSC power domain definitions Link: https://lore.kernel.org/r/20200918124800.15555-4-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>	2020-09-26 12:38:34 -07:00