Core:
- Allow trimming of interrupt hierarchy to support odd hardware setups
where only a subset of the interrupts requires the full hierarchy.
- Allow the retrigger mechanism to follow a hierarchy to simplify
driver code.
- Provide a mechanism to force enable wakeup interrrupts on suspend.
- More infrastructure to handle IPIs in the core code
Architectures:
- Convert ARM/ARM64 IPI handling to utilize the interrupt core code.
Drivers:
- The usual pile of new interrupt chips (MStar, Actions Owl, TI PRUSS,
Designware ICTL)
- ARM(64) IPI related conversions
- Wakeup support for Qualcom PDC
- Prevent hierarchy corruption in the NVIDIA Tegra driver
- The usual small fixes, improvements and cleanups all over the place.
-----BEGIN PGP SIGNATURE-----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=1ewL
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Allow trimming of interrupt hierarchy to support odd hardware
setups where only a subset of the interrupts requires the full
hierarchy.
- Allow the retrigger mechanism to follow a hierarchy to simplify
driver code.
- Provide a mechanism to force enable wakeup interrrupts on suspend.
- More infrastructure to handle IPIs in the core code
Architectures:
- Convert ARM/ARM64 IPI handling to utilize the interrupt core code.
Drivers:
- The usual pile of new interrupt chips (MStar, Actions Owl, TI
PRUSS, Designware ICTL)
- ARM(64) IPI related conversions
- Wakeup support for Qualcom PDC
- Prevent hierarchy corruption in the NVIDIA Tegra driver
- The usual small fixes, improvements and cleanups all over the
place"
* tag 'irq-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
dt-bindings: interrupt-controller: Add MStar interrupt controller
irqchip/irq-mst: Add MStar interrupt controller support
soc/tegra: pmc: Don't create fake interrupt hierarchy levels
soc/tegra: pmc: Allow optional irq parent callbacks
gpio: tegra186: Allow optional irq parent callbacks
genirq/irqdomain: Allow partial trimming of irq_data hierarchy
irqchip/qcom-pdc: Reset PDC interrupts during init
irqchip/qcom-pdc: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
pinctrl: qcom: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
genirq/PM: Introduce IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
pinctrl: qcom: Use return value from irq_set_wake() call
pinctrl: qcom: Set IRQCHIP_SET_TYPE_MASKED and IRQCHIP_MASK_ON_SUSPEND flags
ARM: Handle no IPI being registered in show_ipi_list()
MAINTAINERS: Add entries for Actions Semi Owl SIRQ controller
irqchip: Add Actions Semi Owl SIRQ controller
dt-bindings: interrupt-controller: Add Actions SIRQ controller binding
dt-bindings: dw-apb-ictl: Update binding to describe use as primary interrupt controller
irqchip/dw-apb-ictl: Add primary interrupt controller support
irqchip/dw-apb-ictl: Refactor priot to introducing hierarchical irq domains
genirq: Add stub for set_handle_irq() when !GENERIC_IRQ_MULTI_HANDLER
...
- Userspace support for the Memory Tagging Extension introduced by Armv8.5.
Kernel support (via KASAN) is likely to follow in 5.11.
- Selftests for MTE, Pointer Authentication and FPSIMD/SVE context
switching.
- Fix and subsequent rewrite of our Spectre mitigations, including the
addition of support for PR_SPEC_DISABLE_NOEXEC.
- Support for the Armv8.3 Pointer Authentication enhancements.
- Support for ASID pinning, which is required when sharing page-tables with
the SMMU.
- MM updates, including treating flush_tlb_fix_spurious_fault() as a no-op.
- Perf/PMU driver updates, including addition of the ARM CMN PMU driver and
also support to handle CPU PMU IRQs as NMIs.
- Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
- Implementation of ARCH_STACKWALK for unwinding.
- Improve reporting of unexpected kernel traps due to BPF JIT failure.
- Improve robustness of user-visible HWCAP strings and their corresponding
numerical constants.
- Removal of TEXT_OFFSET.
- Removal of some unused functions, parameters and prototypes.
- Removal of MPIDR-based topology detection in favour of firmware
description.
- Cleanups to handling of SVE and FPSIMD register state in preparation
for potential future optimisation of handling across syscalls.
- Cleanups to the SDEI driver in preparation for support in KVM.
- Miscellaneous cleanups and refactoring work.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl+AUXMQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNFc1B/4q2Kabe+pPu7s1f58Q+OTaEfqcr3F1qh27
F1YpFZUYxg0GPfPsFrnbJpo5WKo7wdR9ceI9yF/GHjs7A/MSoQJis3pG6SlAd9c0
nMU5tCwhg9wfq6asJtl0/IPWem6cqqhdzC6m808DjeHuyi2CCJTt0vFWH3OeHEhG
cfmLfaSNXOXa/MjEkT8y1AXJ/8IpIpzkJeCRA1G5s18PXV9Kl5bafIo9iqyfKPLP
0rJljBmoWbzuCSMc81HmGUQI4+8KRp6HHhyZC/k0WEVgj3LiumT7am02bdjZlTnK
BeNDKQsv2Jk8pXP2SlrI3hIUTz0bM6I567FzJEokepvTUzZ+CVBi
=9J8H
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's quite a lot of code here, but much of it is due to the
addition of a new PMU driver as well as some arm64-specific selftests
which is an area where we've traditionally been lagging a bit.
In terms of exciting features, this includes support for the Memory
Tagging Extension which narrowly missed 5.9, hopefully allowing
userspace to run with use-after-free detection in production on CPUs
that support it. Work is ongoing to integrate the feature with KASAN
for 5.11.
Another change that I'm excited about (assuming they get the hardware
right) is preparing the ASID allocator for sharing the CPU page-table
with the SMMU. Those changes will also come in via Joerg with the
IOMMU pull.
We do stray outside of our usual directories in a few places, mostly
due to core changes required by MTE. Although much of this has been
Acked, there were a couple of places where we unfortunately didn't get
any review feedback.
Other than that, we ran into a handful of minor conflicts in -next,
but nothing that should post any issues.
Summary:
- Userspace support for the Memory Tagging Extension introduced by
Armv8.5. Kernel support (via KASAN) is likely to follow in 5.11.
- Selftests for MTE, Pointer Authentication and FPSIMD/SVE context
switching.
- Fix and subsequent rewrite of our Spectre mitigations, including
the addition of support for PR_SPEC_DISABLE_NOEXEC.
- Support for the Armv8.3 Pointer Authentication enhancements.
- Support for ASID pinning, which is required when sharing
page-tables with the SMMU.
- MM updates, including treating flush_tlb_fix_spurious_fault() as a
no-op.
- Perf/PMU driver updates, including addition of the ARM CMN PMU
driver and also support to handle CPU PMU IRQs as NMIs.
- Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
- Implementation of ARCH_STACKWALK for unwinding.
- Improve reporting of unexpected kernel traps due to BPF JIT
failure.
- Improve robustness of user-visible HWCAP strings and their
corresponding numerical constants.
- Removal of TEXT_OFFSET.
- Removal of some unused functions, parameters and prototypes.
- Removal of MPIDR-based topology detection in favour of firmware
description.
- Cleanups to handling of SVE and FPSIMD register state in
preparation for potential future optimisation of handling across
syscalls.
- Cleanups to the SDEI driver in preparation for support in KVM.
- Miscellaneous cleanups and refactoring work"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
Revert "arm64: initialize per-cpu offsets earlier"
arm64: random: Remove no longer needed prototypes
arm64: initialize per-cpu offsets earlier
kselftest/arm64: Check mte tagged user address in kernel
kselftest/arm64: Verify KSM page merge for MTE pages
kselftest/arm64: Verify all different mmap MTE options
kselftest/arm64: Check forked child mte memory accessibility
kselftest/arm64: Verify mte tag inclusion via prctl
kselftest/arm64: Add utilities and a test to validate mte memory
perf: arm-cmn: Fix conversion specifiers for node type
perf: arm-cmn: Fix unsigned comparison to less than zero
arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
arm64: Add support for PR_SPEC_DISABLE_NOEXEC prctl() option
arm64: Pull in task_stack_page() to Spectre-v4 mitigation code
KVM: arm64: Allow patching EL2 vectors even with KASLR is not enabled
arm64: Get rid of arm64_ssbd_state
KVM: arm64: Convert ARCH_WORKAROUND_2 to arm64_get_spectre_v4_state()
KVM: arm64: Get rid of kvm_arm_have_ssbd()
KVM: arm64: Simplify handling of ARCH_WORKAROUND_2
...
Core changes:
- Allow irq retriggering to follow a hierarchy
- Allow interrupt hierarchies to be trimmed at allocation time
- Allow interrupts to be hidden from /proc/interrupts (IPIs)
- Introduce stub for set_handle_irq() when !GENERIC_IRQ_MULTI_HANDLER
- New per-cpu IPI handling flow
Architecture changes:
- Move arm/arm64 IPI handling to the core interrupt code, removing
the home brewed accounting
Driver updates:
- New driver for the MStar (and more recently Mediatek) platforms
- New driver for the Actions Owl SIRQ controller
- New driver for the TI PRUSS infrastructure
- Wake-up support for the Qualcomm PDC controller
- Primary interrupt controller support for the Designware APB ICTL
- Convert the IPI code for GIC, GICv3, hip04, armada-270-xp and bcm2836
to using standard interrupts
- Improve GICv3 pseudo-NMI support to deal with both non-secure and secure
priorities on arm64
- Convert the GIC/GICv3 drivers to using HW-based irq retrigger
- A sprinkling of dev_err_probe() conversion
- A set of NVIDIA Tegra fixes for interrupt hierarchy corruption
- A reset fix for the Loongson HTVEC driver
- A couple of error handling fixes in the TI SCI drivers
-----BEGIN PGP SIGNATURE-----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=dfh2
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
Core changes:
- Allow irq retriggering to follow a hierarchy
- Allow interrupt hierarchies to be trimmed at allocation time
- Allow interrupts to be hidden from /proc/interrupts (IPIs)
- Introduce stub for set_handle_irq() when !GENERIC_IRQ_MULTI_HANDLER
- New per-cpu IPI handling flow
Architecture changes:
- Move arm/arm64 IPI handling to the core interrupt code, removing
the home brewed accounting
Driver updates:
- New driver for the MStar (and more recently Mediatek) platforms
- New driver for the Actions Owl SIRQ controller
- New driver for the TI PRUSS infrastructure
- Wake-up support for the Qualcomm PDC controller
- Primary interrupt controller support for the Designware APB ICTL
- Convert the IPI code for GIC, GICv3, hip04, armada-270-xp and bcm2836
to using standard interrupts
- Improve GICv3 pseudo-NMI support to deal with both non-secure and secure
priorities on arm64
- Convert the GIC/GICv3 drivers to using HW-based irq retrigger
- A sprinkling of dev_err_probe() conversion
- A set of NVIDIA Tegra fixes for interrupt hierarchy corruption
- A reset fix for the Loongson HTVEC driver
- A couple of error handling fixes in the TI SCI drivers
This reverts commit 353e228eb3.
Qian Cai reports that TX2 no longer boots with his .config as it appears
that task_cpu() gets instrumented and used before KASAN has been
initialised.
Although Mark has a proposed fix, let's take the safe option of reverting
this for now and sorting it out properly later.
Link: https://lore.kernel.org/r/711bc57a314d8d646b41307008db2845b7537b3d.camel@redhat.com
Reported-by: Qian Cai <cai@redhat.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Late patches for 5.10: MTE selftests, minor KCSAN preparation and removal
of some unused prototypes.
(Amit Daniel Kachhap and others)
* for-next/late-arrivals:
arm64: random: Remove no longer needed prototypes
arm64: initialize per-cpu offsets earlier
kselftest/arm64: Check mte tagged user address in kernel
kselftest/arm64: Verify KSM page merge for MTE pages
kselftest/arm64: Verify all different mmap MTE options
kselftest/arm64: Check forked child mte memory accessibility
kselftest/arm64: Verify mte tag inclusion via prctl
kselftest/arm64: Add utilities and a test to validate mte memory
Commit 9bceb80b3c ("arm64: kaslr: Use standard early random
function") removed the direct calls of the __arm64_rndr() and
__early_cpu_has_rndr() functions, but left the dummy prototypes in the
#else branch of the #ifdef CONFIG_ARCH_RANDOM guard.
Remove the redundant prototypes, as they have no users outside of
this header file.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20201006194453.36519-1-andre.przywara@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The current initialization of the per-cpu offset register is difficult
to follow and this initialization is not always early enough for
upcoming instrumentation with KCSAN, where the instrumentation callbacks
use the per-cpu offset.
To make it possible to support KCSAN, and to simplify reasoning about
early bringup code, let's initialize the per-cpu offset earlier, before
we run any C code that may consume it. To do so, this patch adds a new
init_this_cpu_offset() helper that's called before the usual
primary/secondary start functions. For consistency, this is also used to
re-initialize the per-cpu offset after the runtime per-cpu areas have
been allocated (which can change CPU0's offset).
So that init_this_cpu_offset() isn't subject to any instrumentation that
might consume the per-cpu offset, it is marked with noinstr, preventing
instrumentation.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201005164303.21389-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Add userspace support for the Memory Tagging Extension introduced by
Armv8.5.
(Catalin Marinas and others)
* for-next/mte: (30 commits)
arm64: mte: Fix typo in memory tagging ABI documentation
arm64: mte: Add Memory Tagging Extension documentation
arm64: mte: Kconfig entry
arm64: mte: Save tags when hibernating
arm64: mte: Enable swap of tagged pages
mm: Add arch hooks for saving/restoring tags
fs: Handle intra-page faults in copy_mount_options()
arm64: mte: ptrace: Add NT_ARM_TAGGED_ADDR_CTRL regset
arm64: mte: ptrace: Add PTRACE_{PEEK,POKE}MTETAGS support
arm64: mte: Allow {set,get}_tagged_addr_ctrl() on non-current tasks
arm64: mte: Restore the GCR_EL1 register after a suspend
arm64: mte: Allow user control of the generated random tags via prctl()
arm64: mte: Allow user control of the tag check mode via prctl()
mm: Allow arm64 mmap(PROT_MTE) on RAM-based files
arm64: mte: Validate the PROT_MTE request via arch_validate_flags()
mm: Introduce arch_validate_flags()
arm64: mte: Add PROT_MTE support to mmap() and mprotect()
mm: Introduce arch_calc_vm_flag_bits()
arm64: mte: Tags-aware aware memcmp_pages() implementation
arm64: Avoid unnecessary clear_user_page() indirection
...
Fix and subsequently rewrite Spectre mitigations, including the addition
of support for PR_SPEC_DISABLE_NOEXEC.
(Will Deacon and Marc Zyngier)
* for-next/ghostbusters: (22 commits)
arm64: Add support for PR_SPEC_DISABLE_NOEXEC prctl() option
arm64: Pull in task_stack_page() to Spectre-v4 mitigation code
KVM: arm64: Allow patching EL2 vectors even with KASLR is not enabled
arm64: Get rid of arm64_ssbd_state
KVM: arm64: Convert ARCH_WORKAROUND_2 to arm64_get_spectre_v4_state()
KVM: arm64: Get rid of kvm_arm_have_ssbd()
KVM: arm64: Simplify handling of ARCH_WORKAROUND_2
arm64: Rewrite Spectre-v4 mitigation code
arm64: Move SSBD prctl() handler alongside other spectre mitigation code
arm64: Rename ARM64_SSBD to ARM64_SPECTRE_V4
arm64: Treat SSBS as a non-strict system feature
arm64: Group start_thread() functions together
KVM: arm64: Set CSV2 for guests on hardware unaffected by Spectre-v2
arm64: Rewrite Spectre-v2 mitigation code
arm64: Introduce separate file for spectre mitigations and reporting
arm64: Rename ARM64_HARDEN_BRANCH_PREDICTOR to ARM64_SPECTRE_V2
KVM: arm64: Simplify install_bp_hardening_cb()
KVM: arm64: Replace CONFIG_KVM_INDIRECT_VECTORS with CONFIG_RANDOMIZE_BASE
arm64: Remove Spectre-related CONFIG_* options
arm64: Run ARCH_WORKAROUND_2 enabling code on all CPUs
...
Remove unused functions and parameters from ACPI IORT code.
(Zenghui Yu via Lorenzo Pieralisi)
* for-next/acpi:
ACPI/IORT: Remove the unused inline functions
ACPI/IORT: Drop the unused @ops of iort_add_device_replay()
Remove redundant code and fix documentation of caching behaviour for the
HVC_SOFT_RESTART hypercall.
(Pingfan Liu)
* for-next/boot:
Documentation/kvm/arm: improve description of HVC_SOFT_RESTART
arm64/relocate_kernel: remove redundant code
Improve reporting of unexpected kernel traps due to BPF JIT failure.
(Will Deacon)
* for-next/bpf:
arm64: Improve diagnostics when trapping BRK with FAULT_BRK_IMM
Improve robustness of user-visible HWCAP strings and their corresponding
numerical constants.
(Anshuman Khandual)
* for-next/cpuinfo:
arm64/cpuinfo: Define HWCAP name arrays per their actual bit definitions
Cleanups to handling of SVE and FPSIMD register state in preparation
for potential future optimisation of handling across syscalls.
(Julien Grall)
* for-next/fpsimd:
arm64/sve: Implement a helper to load SVE registers from FPSIMD state
arm64/sve: Implement a helper to flush SVE registers
arm64/fpsimdmacros: Allow the macro "for" to be used in more cases
arm64/fpsimdmacros: Introduce a macro to update ZCR_EL1.LEN
arm64/signal: Update the comment in preserve_sve_context
arm64/fpsimd: Update documentation of do_sve_acc
Miscellaneous changes.
(Tian Tao and others)
* for-next/misc:
arm64/mm: return cpu_all_mask when node is NUMA_NO_NODE
arm64: mm: Fix missing-prototypes in pageattr.c
arm64/fpsimd: Fix missing-prototypes in fpsimd.c
arm64: hibernate: Remove unused including <linux/version.h>
arm64/mm: Refactor {pgd, pud, pmd, pte}_ERROR()
arm64: Remove the unused include statements
arm64: get rid of TEXT_OFFSET
arm64: traps: Add str of description to panic() in die()
Memory management updates and cleanups.
(Anshuman Khandual and others)
* for-next/mm:
arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
arm64/mm: Unify CONT_PMD_SHIFT
arm64/mm: Unify CONT_PTE_SHIFT
arm64/mm: Remove CONT_RANGE_OFFSET
arm64/mm: Enable THP migration
arm64/mm: Change THP helpers to comply with generic MM semantics
arm64/mm/ptdump: Add address markers for BPF regions
Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
(Clint Sbisa)
* for-next/pci:
arm64: Enable PCI write-combine resources under sysfs
Perf/PMU driver updates.
(Julien Thierry and others)
* for-next/perf:
perf: arm-cmn: Fix conversion specifiers for node type
perf: arm-cmn: Fix unsigned comparison to less than zero
arm_pmu: arm64: Use NMIs for PMU
arm_pmu: Introduce pmu_irq_ops
KVM: arm64: pmu: Make overflow handler NMI safe
arm64: perf: Defer irq_work to IPI_IRQ_WORK
arm64: perf: Remove PMU locking
arm64: perf: Avoid PMXEV* indirection
arm64: perf: Add missing ISB in armv8pmu_enable_counter()
perf: Add Arm CMN-600 PMU driver
perf: Add Arm CMN-600 DT binding
arm64: perf: Add support caps under sysfs
drivers/perf: thunderx2_pmu: Fix memory resource error handling
drivers/perf: xgene_pmu: Fix uninitialized resource struct
perf: arm_dsu: Support DSU ACPI devices
arm64: perf: Remove unnecessary event_idx check
drivers/perf: hisi: Add missing include of linux/module.h
arm64: perf: Add general hardware LLC events for PMUv3
Support for the Armv8.3 Pointer Authentication enhancements.
(By Amit Daniel Kachhap)
* for-next/ptrauth:
arm64: kprobe: clarify the comment of steppable hint instructions
arm64: kprobe: disable probe of fault prone ptrauth instruction
arm64: cpufeature: Modify address authentication cpufeature to exact
arm64: ptrauth: Introduce Armv8.3 pointer authentication enhancements
arm64: traps: Allow force_signal_inject to pass esr error code
arm64: kprobe: add checks for ARMv8.3-PAuth combined instructions
Tonnes of cleanup to the SDEI driver.
(Gavin Shan)
* for-next/sdei:
firmware: arm_sdei: Remove _sdei_event_unregister()
firmware: arm_sdei: Remove _sdei_event_register()
firmware: arm_sdei: Introduce sdei_do_local_call()
firmware: arm_sdei: Cleanup on cross call function
firmware: arm_sdei: Remove while loop in sdei_event_unregister()
firmware: arm_sdei: Remove while loop in sdei_event_register()
firmware: arm_sdei: Remove redundant error message in sdei_probe()
firmware: arm_sdei: Remove duplicate check in sdei_get_conduit()
firmware: arm_sdei: Unregister driver on error in sdei_init()
firmware: arm_sdei: Avoid nested statements in sdei_init()
firmware: arm_sdei: Retrieve event number from event instance
firmware: arm_sdei: Common block for failing path in sdei_event_create()
firmware: arm_sdei: Remove sdei_is_err()
Selftests for Pointer Authentication and FPSIMD/SVE context-switching.
(Mark Brown and Boyan Karatotev)
* for-next/selftests:
selftests: arm64: Add build and documentation for FP tests
selftests: arm64: Add wrapper scripts for stress tests
selftests: arm64: Add utility to set SVE vector lengths
selftests: arm64: Add stress tests for FPSMID and SVE context switching
selftests: arm64: Add test for the SVE ptrace interface
selftests: arm64: Test case for enumeration of SVE vector lengths
kselftests/arm64: add PAuth tests for single threaded consistency and differently initialized keys
kselftests/arm64: add PAuth test for whether exec() changes keys
kselftests/arm64: add nop checks for PAuth tests
kselftests/arm64: add a basic Pointer Authentication test
Implementation of ARCH_STACKWALK for unwinding.
(Mark Brown)
* for-next/stacktrace:
arm64: Move console stack display code to stacktrace.c
arm64: stacktrace: Convert to ARCH_STACKWALK
arm64: stacktrace: Make stack walk callback consistent with generic code
stacktrace: Remove reliable argument from arch_stack_walk() callback
Support for ASID pinning, which is required when sharing page-tables with
the SMMU.
(Jean-Philippe Brucker)
* for-next/svm:
arm64: cpufeature: Export symbol read_sanitised_ftr_reg()
arm64: mm: Pin down ASIDs for sharing mm with devices
Rely on firmware tables for establishing CPU topology.
(Valentin Schneider)
* for-next/topology:
arm64: topology: Stop using MPIDR for topology information
Spelling fixes.
(Xiaoming Ni and Yanfei Xu)
* for-next/tpyos:
arm64/numa: Fix a typo in comment of arm64_numa_init
arm64: fix some spelling mistakes in the comments by codespell
vDSO cleanups.
(Will Deacon)
* for-next/vdso:
arm64: vdso: Fix unusual formatting in *setup_additional_pages()
arm64: vdso32: Remove a bunch of #ifdef CONFIG_COMPAT_VDSO guards
Our use of broadcast TLB maintenance means that spurious page-faults
that have been handled already by another CPU do not require additional
TLB maintenance.
Make flush_tlb_fix_spurious_fault() a no-op and rely on the existing TLB
invalidation instead. Add an explicit flush_tlb_page() when making a page
dirty, as the TLB is permitted to cache the old read-only entry.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20200728092220.GA21800@willie-the-truck
Signed-off-by: Will Deacon <will@kernel.org>
Patching the EL2 exception vectors is integral to the Spectre-v2
workaround, where it can be necessary to execute CPU-specific sequences
to nobble the branch predictor before running the hypervisor text proper.
Remove the dependency on CONFIG_RANDOMIZE_BASE and allow the EL2 vectors
to be patched even when KASLR is not enabled.
Fixes: 7a132017e7a5 ("KVM: arm64: Replace CONFIG_KVM_INDIRECT_VECTORS with CONFIG_RANDOMIZE_BASE")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202009221053.Jv1XsQUZ%lkp@intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Owing to the fact that the host kernel is always mitigated, we can
drastically simplify the WA2 handling by keeping the mitigation
state ON when entering the guest. This means the guest is either
unaffected or not mitigated.
This results in a nice simplification of the mitigation space,
and the removal of a lot of code that was never really used anyway.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Rewrite the Spectre-v4 mitigation handling code to follow the same
approach as that taken by Spectre-v2.
For now, report to KVM that the system is vulnerable (by forcing
'ssbd_state' to ARM64_SSBD_UNKNOWN), as this will be cleared up in
subsequent steps.
Signed-off-by: Will Deacon <will@kernel.org>
In a similar manner to the renaming of ARM64_HARDEN_BRANCH_PREDICTOR
to ARM64_SPECTRE_V2, rename ARM64_SSBD to ARM64_SPECTRE_V4. This isn't
_entirely_ accurate, as we also need to take into account the interaction
with SSBS, but that will be taken care of in subsequent patches.
Signed-off-by: Will Deacon <will@kernel.org>
The is_ttbrX_addr() functions have somehow ended up in the middle of
the start_thread() functions, so move them out of the way to keep the
code readable.
Signed-off-by: Will Deacon <will@kernel.org>
The Spectre-v2 mitigation code is pretty unwieldy and hard to maintain.
This is largely due to it being written hastily, without much clue as to
how things would pan out, and also because it ends up mixing policy and
state in such a way that it is very difficult to figure out what's going
on.
Rewrite the Spectre-v2 mitigation so that it clearly separates state from
policy and follows a more structured approach to handling the mitigation.
Signed-off-by: Will Deacon <will@kernel.org>
For better or worse, the world knows about "Spectre" and not about
"Branch predictor hardening". Rename ARM64_HARDEN_BRANCH_PREDICTOR to
ARM64_SPECTRE_V2 as part of moving all of the Spectre mitigations into
their own little corner.
Signed-off-by: Will Deacon <will@kernel.org>
The removal of CONFIG_HARDEN_BRANCH_PREDICTOR means that
CONFIG_KVM_INDIRECT_VECTORS is synonymous with CONFIG_RANDOMIZE_BASE,
so replace it.
Signed-off-by: Will Deacon <will@kernel.org>
The spectre mitigations are too configurable for their own good, leading
to confusing logic trying to figure out when we should mitigate and when
we shouldn't. Although the plethora of command-line options need to stick
around for backwards compatibility, the default-on CONFIG options that
depend on EXPERT can be dropped, as the mitigations only do anything if
the system is vulnerable, a mitigation is available and the command-line
hasn't disabled it.
Remove CONFIG_HARDEN_BRANCH_PREDICTOR and CONFIG_ARM64_SSBD in favour of
enabling this code unconditionally.
Signed-off-by: Will Deacon <will@kernel.org>
To enable address space sharing with the IOMMU, introduce
arm64_mm_context_get() and arm64_mm_context_put(), that pin down a
context and ensure that it will keep its ASID after a rollover. Export
the symbols to let the modular SMMUv3 driver use them.
Pinning is necessary because a device constantly needs a valid ASID,
unlike tasks that only require one when running. Without pinning, we would
need to notify the IOMMU when we're about to use a new ASID for a task,
and it would get complicated when a new task is assigned a shared ASID.
Consider the following scenario with no ASID pinned:
1. Task t1 is running on CPUx with shared ASID (gen=1, asid=1)
2. Task t2 is scheduled on CPUx, gets ASID (1, 2)
3. Task tn is scheduled on CPUy, a rollover occurs, tn gets ASID (2, 1)
We would now have to immediately generate a new ASID for t1, notify
the IOMMU, and finally enable task tn. We are holding the lock during
all that time, since we can't afford having another CPU trigger a
rollover. The IOMMU issues invalidation commands that can take tens of
milliseconds.
It gets needlessly complicated. All we wanted to do was schedule task tn,
that has no business with the IOMMU. By letting the IOMMU pin tasks when
needed, we avoid stalling the slow path, and let the pinning fail when
we're out of shareable ASIDs.
After a rollover, the allocator expects at least one ASID to be available
in addition to the reserved ones (one per CPU). So (NR_ASIDS - NR_CPUS -
1) is the maximum number of ASIDs that can be shared with the IOMMU.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200918101852.582559-5-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
ARMv8.4-PMU introduces the PMMIR_EL1 registers and some new PMU events,
like STALL_SLOT etc, are related to it. Let's add a caps directory to
/sys/bus/event_source/devices/armv8_pmuv3_0/ and support slots from
PMMIR_EL1 registers in this entry. The user programs can get the slots
from sysfs directly.
/sys/bus/event_source/devices/armv8_pmuv3_0/caps/slots is exposed
under sysfs. Both ARMv8.4-PMU and STALL_SLOT event are implemented,
it returns the slots from PMMIR_EL1, otherwise it will return 0.
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1600754025-53535-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
The @node passed to cpumask_of_node() can be NUMA_NO_NODE, in that
case it will trigger the following WARN_ON(node >= nr_node_ids) due to
mismatched data types of @node and @nr_node_ids. Actually we should
return cpu_all_mask just like most other architectures do if passed
NUMA_NO_NODE.
Also add a similar check to the inline cpumask_of_node() in numa.h.
Signed-off-by: Zhengyuan Liu <liuzhengyuan@tj.kylinos.cn>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20200921023936.21846-1-liuzhengyuan@tj.kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
In a follow-up patch, we may save the FPSIMD rather than the full SVE
state when the state has to be zeroed on return to userspace (e.g
during a syscall).
Introduce an helper to load SVE vectors from FPSIMD state and zero the rest
of SVE registers.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20200828181155.17745-7-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Introduce a new helper that will zero all SVE registers but the first
128-bits of each vector. This will be used by subsequent patches to
avoid costly store/maipulate/reload sequences in places like do_sve_acc().
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20200828181155.17745-6-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The current version of the macro "for" is not able to work when the
counter is used to generate registers using mnemonics. This is because
gas is not able to evaluate the expression generated if used in
register's name (i.e x\n).
Gas offers a way to evaluate macro arguments by using % in front of
them under the alternate macro mode.
The implementation of "for" is updated to use the alternate macro mode
and %, so we can use the macro in more cases. As the alternate macro
mode may have side-effects, this is disabled when expanding the body.
While it is enough to prefix the argument of the macro "__for_body"
with %, the arguments of "__for" are also prefixed to get a more
bearable value in case of compilation error.
Suggested-by: Dave Martin <dave.martin@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20200828181155.17745-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
A follow-up patch will need to update ZCR_EL1.LEN.
Add a macro that could be re-used in the current and new places to
avoid code duplication.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20200828181155.17745-5-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
- fix fault on page table writes during instruction fetch
s390:
- doc improvement
x86:
- The obvious patches are always the ones that turn out to be
completely broken. /me hangs his head in shame.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl9nyjsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNpcAf/bsW1B+Q8QJnyfU4RSiX28lG8Ki9F
9A0aVJPW4U/x7COZuhldrQGkbHDA5agavCevghMuOqWkz2gs6ihpAGgzfG+FVIm7
2yi4k9A90kPrMSBf8qaLgvybGNO6uxGpJmv54MjHpkLPUEz+J1MuB9D6eEqBZkWz
ncOSsGS2eeUFpqulA9DCN3O3PbaFeAXPNJnDNGqxrGjV7CriosRlbK02PVxTQzvT
nuGzDgaOmmRXntIQ7hrk9DJlHm7gH2jH8TK9gB2xm0yuVm2/nNlpkY6rP6NDUdLs
OrJOzxWOcSO8HRgBhlFhED/8heTqHCJS1vMUI3M6Z62p324TjRDjRC+4ow==
=tpZU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- fix fault on page table writes during instruction fetch
s390:
- doc improvement
x86:
- The obvious patches are always the ones that turn out to be
completely broken. /me hangs his head in shame"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
Revert "KVM: Check the allocation of pv cpu mask"
KVM: arm64: Remove S1PTW check from kvm_vcpu_dabt_iswrite()
KVM: arm64: Assume write fault on S1PTW permission fault on instruction fetch
docs: kvm: add documentation for KVM_CAP_S390_DIAG318
Now that kvm_vcpu_trap_is_write_fault() checks for S1PTW, there
is no need for kvm_vcpu_dabt_iswrite() to do the same thing, as
we already check for this condition on all existing paths.
Drop the check and add a comment instead.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200915104218.1284701-3-maz@kernel.org
KVM currently assumes that an instruction abort can never be a write.
This is in general true, except when the abort is triggered by
a S1PTW on instruction fetch that tries to update the S1 page tables
(to set AF, for example).
This can happen if the page tables have been paged out and brought
back in without seeing a direct write to them (they are thus marked
read only), and the fault handling code will make the PT executable(!)
instead of writable. The guest gets stuck forever.
In these conditions, the permission fault must be considered as
a write so that the Stage-1 update can take place. This is essentially
the I-side equivalent of the problem fixed by 60e21a0ef5 ("arm64: KVM:
Take S1 walks into account when determining S2 write faults").
Update kvm_is_write_fault() to return true on IABT+S1PTW, and introduce
kvm_vcpu_trap_is_exec_fault() that only return true when no faulting
on a S1 fault. Additionally, kvm_vcpu_dabt_iss1tw() is renamed to
kvm_vcpu_abt_iss1tw(), as the above makes it plain that it isn't
specific to data abort.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200915104218.1284701-2-maz@kernel.org
When generating instructions at runtime, for example due to kernel text
patching or the BPF JIT, we can emit a trapping BRK instruction if we
are asked to encode an invalid instruction such as an out-of-range]
branch. This is indicative of a bug in the caller, and will result in a
crash on executing the generated code. Unfortunately, the message from
the crash is really unhelpful, and mumbles something about ptrace:
| Unexpected kernel BRK exception at EL1
| Internal error: ptrace BRK handler: f2000100 [#1] SMP
We can do better than this. Install a break handler for FAULT_BRK_IMM,
which is the immediate used to encode the "I've been asked to generate
an invalid instruction" error, and triage the faulting PC to determine
whether or not the failure occurred in the BPF JIT.
Link: https://lore.kernel.org/r/20200915141707.GB26439@willie-the-truck
Reported-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
As with the generic arch_stack_walk() code the arm64 stack walk code takes
a callback that is called per stack frame. Currently the arm64 code always
passes a struct stackframe to the callback and the generic code just passes
the pc, however none of the users ever reference anything in the struct
other than the pc value. The arm64 code also uses a return type of int
while the generic code uses a return type of bool though in both cases the
return value is a boolean value and the sense is inverted between the two.
In order to reduce code duplication when arm64 is converted to use
arch_stack_walk() change the signature and return sense of the arm64
specific callback to match that of the generic code.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20200914153409.25097-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
This change exposes write-combine mappings under sysfs for
prefetchable PCI resources on arm64.
Originally, the usage of "write combine" here was driven by the x86
definition of write combine. This definition is specific to x86 and
does not generalize to other architectures. However, the usage of WC
has mutated to "write combine" semantics, which is implemented
differently on each arch.
Generally, prefetchable BARs are accepted to allow speculative
accesses, write combining, and re-ordering-- from the PCI perspective,
this means there are no read side effects. (This contradicts the PCI
spec which allows prefetchable BARs to have read side effects, but
this definition is ill-advised as it is impossible to meet.) On x86,
prefetchable BARs are mapped as WC as originally defined (with some
conditionals on arch features). On arm64, WC is taken to mean normal
non-cacheable memory.
In practice, write combine semantics are used to minimize write
operations. A common usage of this is minimizing PCI TLPs which can
significantly improve performance with PCI devices. In order to
provide the same benefits to userspace, we need to allow userspace to
map prefetchable BARs with write combine semantics. The resourceX_wc
mapping is used today by userspace programs and libraries.
While this model is flawed as "write combine" is very ill-defined, it
is already used by multiple non-x86 archs to expose write combine
semantics to user space. We enable this on arm64 to give userspace on
arm64 an equivalent mechanism for utilizing write combining with PCI
devices.
Signed-off-by: Clint Sbisa <csbisa@amazon.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200918033312.ddfpibgfylfjpex2@amazon.com
Signed-off-by: Will Deacon <will@kernel.org>
Let's switch the arm64 code to the core accounting, which already
does everything we need.
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The old IPI registration interface is now unused on arm64, so let's
get rid of it.
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The function __{pgd, pud, pmd, pte}_error() are introduced so that
they can be called by {pgd, pud, pmd, pte}_ERROR(). However, some
of the functions could never be called when the corresponding page
table level isn't enabled. For example, __{pud, pmd}_error() are
unused when PUD and PMD are folded to PGD.
This removes __{pgd, pud, pmd, pte}_error() and call pr_err() from
{pgd, pud, pmd, pte}_ERROR() directly, similar to what x86/powerpc
are doing. With this, the code looks a bit simplified either.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20200913234730.23145-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
Some Armv8.3 Pointer Authentication enhancements have been introduced
which are mandatory for Armv8.6 and optional for Armv8.3. These features
are,
* ARMv8.3-PAuth2 - An enhanced PAC generation logic is added which hardens
finding the correct PAC value of the authenticated pointer.
* ARMv8.3-FPAC - Fault is generated now when the ptrauth authentication
instruction fails in authenticating the PAC present in the address.
This is different from earlier case when such failures just adds an
error code in the top byte and waits for subsequent load/store to abort.
The ptrauth instructions which may cause this fault are autiasp, retaa
etc.
The above features are now represented by additional configurations
for the Address Authentication cpufeature and a new ESR exception class.
The userspace fault received in the kernel due to ARMv8.3-FPAC is treated
as Illegal instruction and hence signal SIGILL is injected with ILL_ILLOPN
as the signal code. Note that this is different from earlier ARMv8.3
ptrauth where signal SIGSEGV is issued due to Pointer authentication
failures. The in-kernel PAC fault causes kernel to crash.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20200914083656.21428-4-amit.kachhap@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Some error signal need to pass proper ARM esr error code to userspace to
better identify the cause of the signal. So the function
force_signal_inject is extended to pass this as a parameter. The
existing code is not affected by this change.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20200914083656.21428-3-amit.kachhap@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently the ARMv8.3-PAuth combined branch instructions (braa, retaa
etc.) are not simulated for out-of-line execution with a handler. Hence the
uprobe of such instructions leads to kernel warnings in a loop as they are
not explicitly checked and fall into INSN_GOOD categories. Other combined
instructions like LDRAA and LDRBB can be probed.
The issue of the combined branch instructions is fixed by adding
group definitions of all such instructions and rejecting their probes.
The instruction groups added are br_auth(braa, brab, braaz and brabz),
blr_auth(blraa, blrab, blraaz and blrabz), ret_auth(retaa and retab) and
eret_auth(eretaa and eretab).
Warning log:
WARNING: CPU: 0 PID: 156 at arch/arm64/kernel/probes/uprobes.c:182 uprobe_single_step_handler+0x34/0x50
Modules linked in:
CPU: 0 PID: 156 Comm: func Not tainted 5.9.0-rc3 #188
Hardware name: Foundation-v8A (DT)
pstate: 804003c9 (Nzcv DAIF +PAN -UAO BTYPE=--)
pc : uprobe_single_step_handler+0x34/0x50
lr : single_step_handler+0x70/0xf8
sp : ffff800012af3e30
x29: ffff800012af3e30 x28: ffff000878723b00
x27: 0000000000000000 x26: 0000000000000000
x25: 0000000000000000 x24: 0000000000000000
x23: 0000000060001000 x22: 00000000cb000022
x21: ffff800012065ce8 x20: ffff800012af3ec0
x19: ffff800012068d50 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000
x9 : ffff800010085c90 x8 : 0000000000000000
x7 : 0000000000000000 x6 : ffff80001205a9c8
x5 : ffff80001205a000 x4 : ffff80001233db80
x3 : ffff8000100a7a60 x2 : 0020000000000003
x1 : 0000fffffffff008 x0 : ffff800012af3ec0
Call trace:
uprobe_single_step_handler+0x34/0x50
single_step_handler+0x70/0xf8
do_debug_exception+0xb8/0x130
el0_sync_handler+0x138/0x1b8
el0_sync+0x158/0x180
Fixes: 74afda4016 ("arm64: compile the kernel with ptrauth return address signing")
Fixes: 04ca3204fa ("arm64: enable pointer authentication")
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20200914083656.21428-2-amit.kachhap@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The GIC's internal view of the priority mask register and the assigned
interrupt priorities are based on whether GIC security is enabled and
whether firmware routes Group 0 interrupts to EL3. At the moment, we
support priority masking when ICC_PMR_EL1 and interrupt priorities are
either both modified by the GIC, or both left unchanged.
Trusted Firmware-A's default interrupt routing model allows Group 0
interrupts to be delivered to the non-secure world (SCR_EL3.FIQ == 0).
Unfortunately, this is precisely the case that the GIC driver doesn't
support: ICC_PMR_EL1 remains unchanged, but the GIC's view of interrupt
priorities is different from the software programmed values.
Support pseudo-NMIs when SCR_EL3.FIQ == 0 by using a different value to
mask regular interrupts. All the other values remain the same.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200912153707.667731-3-alexandru.elisei@arm.com
In order to deal with IPIs as normal interrupts, let's add
a new way to register them with the architecture code.
set_smp_ipi_range() takes a range of interrupts, and allows
the arch code to request them as if the were normal interrupts.
A standard handler is then called by the core IRQ code to deal
with the IPI.
This means that we don't need to call irq_enter/irq_exit, and
that we don't need to deal with set_irq_regs either. So let's
move the dispatcher into its own function, and leave handle_IPI()
as a compatibility function.
On the sending side, let's make use of ipi_send_mask, which
already exists for this purpose.
One of the major difference is that we end up, in some cases
(such as when performing IRQ time accounting on the scheduler
IPI), end up with nested irq_enter()/irq_exit() pairs.
Other than the (relatively small) overhead, there should be
no consequences to it (these pairs are designed to nest
correctly, and the accounting shouldn't be off).
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced
(dirty logging, for example)
- Fix tracing output of 64bit values
x86:
- nSVM state restore fixes
- Async page fault fixes
- Lots of small fixes everywhere
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl9dM5kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM+Iwf+LbISO7ccpPMK1kKtOeug/jZv+xQA
sVaBGRzYo+k2e0XtV8E8IV4N30FBtYSwXsbBKkMAoy2FpmMebgDWDQ7xspb6RJMS
/y8t1iqPwdOaLIkUkgc7UihSTlZm05Es3f3q6uZ9+oaM4Fe+V7xWzTUX4Oy89JO7
KcQsTD7pMqS4bfZGADK781ITR/WPgCi0aYx5s6dcwcZAQXhb1K1UKEjB8OGKnjUh
jliReJtxRA16rjF+S5aJ7L07Ce/ksrfwkI4NXJ4GxW+lyOfVNdSBJUBaZt1m7G2M
1We5+i5EjKCjuxmgtUUUfVdazpj1yl+gBGT7KKkLte9T9WZdXyDnixAbvg==
=OFb3
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"A bit on the bigger side, mostly due to me being on vacation, then
busy, then on parental leave, but there's nothing worrisome.
ARM:
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced (dirty
logging, for example)
- Fix tracing output of 64bit values
x86:
- nSVM state restore fixes
- Async page fault fixes
- Lots of small fixes everywhere"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: emulator: more strict rsm checks.
KVM: nSVM: more strict SMM checks when returning to nested guest
SVM: nSVM: setup nested msr permission bitmap on nested state load
SVM: nSVM: correctly restore GIF on vmexit from nesting after migration
x86/kvm: don't forget to ACK async PF IRQ
x86/kvm: properly use DEFINE_IDTENTRY_SYSVEC() macro
KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit
KVM: SVM: avoid emulation with stale next_rip
KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_EN
KVM: SVM: Periodically schedule when unregistering regions on destroy
KVM: MIPS: Change the definition of kvm type
kvm x86/mmu: use KVM_REQ_MMU_SYNC to sync when needed
KVM: nVMX: Fix the update value of nested load IA32_PERF_GLOBAL_CTRL control
KVM: fix memory leak in kvm_io_bus_unregister_dev()
KVM: Check the allocation of pv cpu mask
KVM: nVMX: Update VMCS02 when L2 PAE PDPTE updates detected
KVM: arm64: Update page shift if stage 2 block mapping not supported
KVM: arm64: Fix address truncation in traces
KVM: arm64: Do not try to map PUDs when they are folded into PMD
arm64/x86: KVM: Introduce steal-time cap
...
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced
(dirty logging, for example)
- Fix tracing output of 64bit values
-----BEGIN PGP SIGNATURE-----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=VBrL
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for Linux 5.9, take #1
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced
(dirty logging, for example)
- Fix tracing output of 64bit values
Similar to how CONT_PTE_SHIFT is determined, this introduces a new
kernel option (CONFIG_CONT_PMD_SHIFT) to determine CONT_PMD_SHIFT.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20200910095936.20307-3-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
CONT_PTE_SHIFT actually depends on CONFIG_ARM64_CONT_SHIFT. It's
reasonable to reflect the dependency:
* This renames CONFIG_ARM64_CONT_SHIFT to CONFIG_ARM64_CONT_PTE_SHIFT,
so that we can introduce CONFIG_ARM64_CONT_PMD_SHIFT later.
* CONT_{SHIFT, SIZE, MASK}, defined in page-def.h are removed as they
are not used by anyone.
* CONT_PTE_SHIFT is determined by CONFIG_ARM64_CONT_PTE_SHIFT.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20200910095936.20307-2-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
The macro was introduced by commit <ecf35a237a85> ("arm64: PTE/PMD
contiguous bit definition") at the beginning. It's only used by
commit <348a65cdcbbf> ("arm64: Mark kernel page ranges contiguous"),
which was reverted later by commit <667c27597ca8>. This makes the
macro unused.
This removes the unused macro (CONT_RANGE_OFFSET).
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20200910095936.20307-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
