Hosts can often receive neighbour discovery messages
that are not for them.
Use a dedicated drop reason to make clear the packet is dropped
for this normal case.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a generic drop reason for any error detected
in ndisc_parse_options().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change ndisc_redirect_rcv() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
and values from icmpv6_notify().
More reasons are added later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change ndisc_router_discovery() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
and SKB_CONSUMED.
More reasons are added later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change ndisc_recv_rs() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
or SKB_CONSUMED. More reasons are added later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change ndisc_recv_na() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
or SKB_CONSUMED. More reasons are added later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change ndisc_recv_ns() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
or SKB_CONSUMED.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we try to start AF_XDP on some machines with long running time, due
to the machine's memory fragmentation problem, there is no sufficient
contiguous physical memory that will cause the start failure.
If the size of the queue is 8 * 1024, then the size of the desc[] is
8 * 1024 * 8 = 16 * PAGE, but we also add struct xdp_ring size, so it is
16page+. This is necessary to apply for a 4-order memory. If there are a
lot of queues, it is difficult to these machine with long running time.
Here, that we actually waste 15 pages. 4-Order memory is 32 pages, but
we only use 17 pages.
This patch replaces __get_free_pages() by vmalloc() to allocate memory
to solve these problems.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
taprio queueMaxSDU fixes
This fixes 3 issues noticed while attempting to reoffload the
dynamically calculated queueMaxSDU values. These are:
- Dynamic queueMaxSDU is not calculated correctly due to a lost patch
- Dynamically calculated queueMaxSDU needs to be clamped on the low end
- Dynamically calculated queueMaxSDU needs to be clamped on the high end
====================
Link: https://lore.kernel.org/r/20230215224632.2532685-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It makes no sense to keep randomly large max_sdu values, especially if
larger than the device's max_mtu. These are visible in "tc qdisc show".
Such a max_sdu is practically unlimited and will cause no packets for
that traffic class to be dropped on enqueue.
Just set max_sdu_dynamic to U32_MAX, which in the logic below causes
taprio to save a max_frm_len of U32_MAX and a max_sdu presented to user
space of 0 (unlimited).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The overhead specified in the size table comes from the user. With small
time intervals (or gates always closed), the overhead can be larger than
the max interval for that traffic class, and their difference is
negative.
What we want to happen is for max_sdu_dynamic to have the smallest
non-zero value possible (1) which means that all packets on that traffic
class are dropped on enqueue. However, since max_sdu_dynamic is u32, a
negative is represented as a large value and oversized dropping never
happens.
Use max_t with int to force a truncation of max_frm_len to no smaller
than dev->hard_header_len + 1, which in turn makes max_sdu_dynamic no
smaller than 1.
Fixes: fed87cc671 ("net/sched: taprio: automatically calculate queueMaxSDU based on TC gate durations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
taprio_calculate_gate_durations() depends on netdev_get_num_tc() and
this returns 0. So it calculates the maximum gate durations for no
traffic class.
I had tested the blamed commit only with another patch in my tree, one
which in the end I decided isn't valuable enough to submit ("net/sched:
taprio: mask off bits in gate mask that exceed number of TCs").
The problem is that having this patch threw off my testing. By moving
the netdev_set_num_tc() call earlier, we implicitly gave to
taprio_calculate_gate_durations() the information it needed.
Extract only the portion from the unsubmitted change which applies the
mqprio configuration to the netdev earlier.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230130173145.475943-15-vladimir.oltean@nxp.com/
Fixes: a306a90c8f ("net/sched: taprio: calculate tc gate durations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix three cases of overproduction of wakeups:
(1) rxrpc_input_split_jumbo() conditionally notifies the app that there's
data for recvmsg() to collect if it queues some data - and then its
only caller, rxrpc_input_data(), goes and wakes up recvmsg() anyway.
Fix the rxrpc_input_data() to only do the wakeup in failure cases.
(2) If a DATA packet is received for a call by the I/O thread whilst
recvmsg() is busy draining the call's rx queue in the app thread, the
call will left on the recvmsg() queue for recvmsg() to pick up, even
though there isn't any data on it.
This can cause an unexpected recvmsg() with a 0 return and no MSG_EOR
set after the reply has been posted to a service call.
Fix this by discarding pending calls from the recvmsg() queue that
don't need servicing yet.
(3) Not-yet-completed calls get requeued after having data read from them,
even if they have no data to read.
Fix this by only requeuing them if they have data waiting on them; if
they don't, the I/O thread will requeue them when data arrives or they
fail.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/3386149.1676497685@warthog.procyon.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alex Elder says:
====================
net: final GSI register updates
I believe this is the last set of changes required to allow IPA v5.0
to be supported. There is a little cleanup work remaining, but that
can happen in the next Linux release cycle. Otherwise we just need
config data and register definitions for IPA v5.0 (and DTS updates).
These are ready but won't be posted without further testing.
The first patch in this series fixes a minor bug in a patch just
posted, which I found too late. The second eliminates the GSI
memory "adjustment"; this was done previously to avoid/delay the
need to implement a more general way to define GSI register offsets.
Note that this patch causes "checkpatch" warnings due to indentation
that aligns with an open parenthesis.
The third patch makes use of the newly-defined register offsets, to
eliminate the need for a function that hid a few details. The next
modifies a different helper function to work properly for IPA v5.0+.
The fifth patch changes the way the event ring size is specified
based on how it's now done for IPA v5.0+. And the last defines a
new register required for IPA v5.0+.
====================
Link: https://lore.kernel.org/r/20230215195352.755744-1-elder@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Starting at IPA v5.0, the number of event rings per EE is defined
in a field in a new HW_PARAM_4 GSI register rather than HW_PARAM_2.
Define this new register and its fields, and update the code that
checks the number of rings supported by hardware to use the proper
field based on IPA version.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Starting with IPA v5.0, a channel's event ring index is encoded in
a field in the CH_C_CNTXT_1 GSI register rather than CH_C_CNTXT_0.
Define a new field ID for the former register and encode the event
ring in the appropriate register.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The GSI channel protocol field in the CH_C_CNTXT_0 GSI register is
widened starting IPA v5.0, making the CHTYPE_PROTOCOL_MSB field
added in IPA v4.5 unnecessary. Update the code to reflect this.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we explicitly define each register field width there is no
need to have a special encoding function for the event ring length.
Add a field for this to the EV_CH_E_CNTXT_1 GSI register, and use it
in place of ev_ch_e_cntxt_1_length_encode() (which can be removed).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Starting at IPA v4.5, almost all GSI registers had their offsets
changed by a fixed amount (shifted downward by 0xd000). Rather than
defining offsets for all those registers dependent on version, an
adjustment was applied for most register accesses. This was
implemented in commit cdeee49f3e ("net: ipa: adjust GSI register
addresses"). It was later modified to be a bit more obvious about
the adjusment, in commit 571b1e7e58 ("net: ipa: use a separate
pointer for adjusted GSI memory").
We now are able to define every GSI register with its own offset, so
there's no need to implement this special adjustment.
So get rid of the "virt_raw" pointer, and just maintain "virt" as
the (non-adjusted) base address of I/O mapped GSI register memory.
Redefine the offsets of all GSI registers (other than the INTER_EE
ones, which were not subject to the adjustment) for IPA v4.5+,
subtracting 0xd000 from their defined offsets instead.
Move the ERROR_LOG and ERROR_LOG_CLR definitions further down in the
register definition files so all registers are defined in order of
their offset.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
I spotted an error in a patch posted this week, unfortunately just
after it got accepted. The effect of the bug is that time-based
interrupt moderation is disabled. This is not technically a bug,
but it is not what is intended. The problem is that a |= assignment
got implemented as a simple assignment, so the previously assigned
value was ignored.
Fixes: edc6158b18 ("net: ipa: define fields for event-ring related registers")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
drm:
- dynamic debug disable for now
fbdev:
- deferred i/o device close fix
amdgpu:
- Fix GC11.x suspend warning
- Fix display warning
vc4:
- YUV planes fix
- hdmi display fix
- crtc reduced blanking fix
ast:
- fix start address computation
vmwgfx:
- fix bo/handle races
i915:
- gen11 WA fix
-----BEGIN PGP SIGNATURE-----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=Dii1
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-02-17' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Just a final collection of misc fixes, the biggest disables the
recently added dynamic debugging support, it has a regression that
needs some bigger fixes.
Otherwise a bunch of fixes across the board, vc4, amdgpu and vmwgfx
mostly, with some smaller i915 and ast fixes.
drm:
- dynamic debug disable for now
fbdev:
- deferred i/o device close fix
amdgpu:
- Fix GC11.x suspend warning
- Fix display warning
vc4:
- YUV planes fix
- hdmi display fix
- crtc reduced blanking fix
ast:
- fix start address computation
vmwgfx:
- fix bo/handle races
i915:
- gen11 WA fix"
* tag 'drm-fixes-2023-02-17' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Fail atomic_check early on normalize_zpos error
drm/amd/amdgpu: fix warning during suspend
drm/vmwgfx: Do not drop the reference to the handle too soon
drm/vmwgfx: Stop accessing buffer objects which failed init
drm/i915/gen11: Wa_1408615072/Wa_1407596294 should be on GT list
drm: Disable dynamic debug as broken
drm/ast: Fix start address computation
fbdev: Fix invalid page access after closing deferred I/O devices
drm/vc4: crtc: Increase setup cost in core clock calculation to handle extreme reduced blanking
drm/vc4: hdmi: Always enable GCP with AVMUTE cleared
drm/vc4: Fix YUV plane handling when planes are in different buffers
an invalid page access fix for fbdev, mark dynamic debug as broken, a
double free and refcounting fix for vmwgfx.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCY+308gAKCRDj7w1vZxhR
xTd/AP9SMRG/taunOEH2LQ6MsiOqFOUqsC39FhHiFs7tJdGXIAEA6n3SuP+33k0d
YCwcH74h/sx+/ILHoQhdZnBFxhYrHwM=
=oo+N
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2023-02-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Multiple fixes in vc4 to address issues with YUV planes, HDMI and CRTC;
an invalid page access fix for fbdev, mark dynamic debug as broken, a
double free and refcounting fix for vmwgfx.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216091905.i5wswy4dd74x4br5@houat
Current release - regressions:
- fix unwanted sign extension in netdev_stats_to_stats64()
Current release - new code bugs:
- initialize net->notrefcnt_tracker earlier
- devlink: fix netdev notifier chain corruption
- nfp: make sure mbox accesses in IPsec code are atomic
- ice: fix check for weight and priority of a scheduling node
Previous releases - regressions:
- ice: xsk: fix cleaning of XDP_TX frame, prevent inf loop
- igb: fix I2C bit banging config with external thermal sensor
Previous releases - always broken:
- sched: tcindex: update imperfect hash filters respecting rcu
- mpls: fix stale pointer if allocation fails during device rename
- dccp/tcp: avoid negative sk_forward_alloc by ipv6_pinfo.pktoptions
- remove WARN_ON_ONCE(sk->sk_forward_alloc) from sk_stream_kill_queues()
- af_key: fix heap information leak
- ipv6: fix socket connection with DSCP (correct interpretation
of the tclass field vs fib rule matching)
- tipc: fix kernel warning when sending SYN message
- vmxnet3: read RSS information from the correct descriptor (eop)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=r2l1
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Fixes from the main networking tree only, probably because all
sub-trees have backed off and haven't submitted their changes.
None of the fixes here are particularly scary and no outstanding
regressions. In an ideal world the "current release" sections would be
empty at this stage but that never happens.
Current release - regressions:
- fix unwanted sign extension in netdev_stats_to_stats64()
Current release - new code bugs:
- initialize net->notrefcnt_tracker earlier
- devlink: fix netdev notifier chain corruption
- nfp: make sure mbox accesses in IPsec code are atomic
- ice: fix check for weight and priority of a scheduling node
Previous releases - regressions:
- ice: xsk: fix cleaning of XDP_TX frame, prevent inf loop
- igb: fix I2C bit banging config with external thermal sensor
Previous releases - always broken:
- sched: tcindex: update imperfect hash filters respecting rcu
- mpls: fix stale pointer if allocation fails during device rename
- dccp/tcp: avoid negative sk_forward_alloc by ipv6_pinfo.pktoptions
- remove WARN_ON_ONCE(sk->sk_forward_alloc) from
sk_stream_kill_queues()
- af_key: fix heap information leak
- ipv6: fix socket connection with DSCP (correct interpretation of
the tclass field vs fib rule matching)
- tipc: fix kernel warning when sending SYN message
- vmxnet3: read RSS information from the correct descriptor (eop)"
* tag 'net-6.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
devlink: Fix netdev notifier chain corruption
igb: conditionalize I2C bit banging on external thermal sensor support
net: mpls: fix stale pointer if allocation fails during device rename
net/sched: tcindex: search key must be 16 bits
tipc: fix kernel warning when sending SYN message
igb: Fix PPS input and output using 3rd and 4th SDP
net: use a bounce buffer for copying skb->mark
ixgbe: add double of VLAN header when computing the max MTU
i40e: add double of VLAN header when computing the max MTU
ixgbe: allow to increase MTU to 3K with XDP enabled
net: stmmac: Restrict warning on disabling DMA store and fwd mode
net/sched: act_ctinfo: use percpu stats
net: stmmac: fix order of dwmac5 FlexPPS parametrization sequence
ice: fix lost multicast packets in promisc mode
ice: Fix check for weight and priority of a scheduling node
bnxt_en: Fix mqprio and XDP ring checking logic
net: Fix unwanted sign extension in netdev_stats_to_stats64()
net/usb: kalmia: Don't pass act_len in usb_bulk_msg error path
net: openvswitch: fix possible memory leak in ovs_meter_cmd_set()
af_key: Fix heap information leak
...
-----BEGIN PGP SIGNATURE-----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=QFJG
-----END PGP SIGNATURE-----
Merge tag 'block-6.2-2023-02-16' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Just a few NVMe fixes that should go into the 6.2 release, adding a
quirk and fixing two issues introduced in this release:
- NVMe fixes via Christoph:
- Always return an ERR_PTR from nvme_pci_alloc_dev (Irvin Cote)
- Add bogus ID quirk for ADATA SX6000PNP (Daniel Wagner)
- Set the DMA mask earlier (Christoph Hellwig)"
* tag 'block-6.2-2023-02-16' of git://git.kernel.dk/linux:
nvme-pci: always return an ERR_PTR from nvme_pci_alloc_dev
nvme-pci: set the DMA mask earlier
nvme-pci: add bogus ID quirk for ADATA SX6000PNP
One more last minute patch for v6.2 updating the parsing of the
newly added spi-cs-setup-delay-ns - it's been pointed out that
due to the way DT parsing works the change in property size is
ABI visible so let's not let a release go out without it being
fixed. The change got split from some earlier ABI related fixes
to the property since the first version sent had a build error.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmPuWgoACgkQJNaLcl1U
h9AI/gf/SEQzjI4vkoIezfwUfgzeP7Cjphna2rAmOOFc+S871FHUne7csWiNS3DI
YGhr3x2VqKdPyxkM+YoOavH9B9SmF9MUFtiT7Q5MEp0Pb7TQzw23qjrKBrKde0yX
r5cETkhy+21Tk6hzMs/0cC/4zRcf7IjgDT9L9+To9mKDHCYKoj3/WHoES6JgTYa8
z8fApLvjvCx2432eLzm66CoXgSK+UnQKT2bdo2w+YcITPBqge6REhmcfnOT9MzDO
LPOZ2hJ4lM6SPW2a4yBMX4pIouluDd6/giQ8LBt7xjesIKVmiHoW0dXRNis4+gq/
6kVjABEsBQ/xBOFgbuq1WfGRxaVJVA==
=qTWJ
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.2-rc8-abi' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One more last minute patch for v6.2 updating the parsing of the newly
added spi-cs-setup-delay-ns.
It's been pointed out that due to the way DT parsing works the change
in property size is ABI visible so let's not let a release go out
without it being fixed. The change got split from some earlier ABI
related fixes to the property since the first version sent had a build
error"
* tag 'spi-v6.2-rc8-abi' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Use a 32-bit DT property for spi-cs-setup-delay-ns
- fix a potential Kconfig issue with gpio-mlxbf2 not selecting
GPIOLIB_IRQCHIP
- another immutable irqchip conversion, this time for gpio-vf610
- fix a wakeup issue on Clevo NH5xAx
-----BEGIN PGP SIGNATURE-----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=oon2
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a potential Kconfig issue with gpio-mlxbf2 not selecting
GPIOLIB_IRQCHIP
- another immutable irqchip conversion, this time for gpio-vf610
- fix a wakeup issue on Clevo NH5xAx
* tag 'gpio-fixes-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mlxbf2: select GPIOLIB_IRQCHIP
gpiolib: acpi: Add a ignore wakeup quirk for Clevo NH5xAx
gpio: vf610: make irq_chip immutable
gpiolib: acpi: remove redundant declaration
The uuid code is very low maintainance now that the major overhaul
has completed, and doesn't need it's own tree. All the recent work
has been done by Andy who'd like to stay on as a reviewer without an
explicit tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This code has been stale for years and I have no way to test it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* EHT channel puncturing support (client & AP)
* some support for AP MLD without mac80211
* fixes for A-MSDU on mesh connections
Major driver changes:
iwlwifi
* EHT rate reporting
* Bump FW API to 74 for AX devices
* STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware
mt76
* switch to using page pool allocator
* mt7996 EHT (Wi-Fi 7) support
* Wireless Ethernet Dispatch (WED) reset support
libertas
* WPS enrollee support
brcmfmac
* Rename Cypress 89459 to BCM4355
* BCM4355 and BCM4377 support
mwifiex
* SD8978 chipset support
rtl8xxxu
* LED support
ath12k
* new driver for Qualcomm Wi-Fi 7 devices
ath11k
* IPQ5018 support
* Fine Timing Measurement (FTM) responder role support
* channel 177 support
ath10k
* store WLAN firmware version in SMEM image table
-----BEGIN PGP SIGNATURE-----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=p6+A
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Major stack changes:
* EHT channel puncturing support (client & AP)
* some support for AP MLD without mac80211
* fixes for A-MSDU on mesh connections
Major driver changes:
iwlwifi
* EHT rate reporting
* Bump FW API to 74 for AX devices
* STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware
mt76
* switch to using page pool allocator
* mt7996 EHT (Wi-Fi 7) support
* Wireless Ethernet Dispatch (WED) reset support
libertas
* WPS enrollee support
brcmfmac
* Rename Cypress 89459 to BCM4355
* BCM4355 and BCM4377 support
mwifiex
* SD8978 chipset support
rtl8xxxu
* LED support
ath12k
* new driver for Qualcomm Wi-Fi 7 devices
ath11k
* IPQ5018 support
* Fine Timing Measurement (FTM) responder role support
* channel 177 support
ath10k
* store WLAN firmware version in SMEM image table
* tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits)
wifi: brcmfmac: p2p: Introduce generic flexible array frame member
wifi: mac80211: add documentation for amsdu_mesh_control
wifi: cfg80211: remove gfp parameter from cfg80211_obss_color_collision_notify description
wifi: mac80211: always initialize link_sta with sta
wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta()
wifi: cfg80211: Set SSID if it is not already set
wifi: rtw89: move H2C of del_pkt_offload before polling FW status ready
wifi: rtw89: use readable return 0 in rtw89_mac_cfg_ppdu_status()
wifi: rtw88: usb: drop now unnecessary URB size check
wifi: rtw88: usb: send Zero length packets if necessary
wifi: rtw88: usb: Set qsel correctly
wifi: mac80211: fix off-by-one link setting
wifi: mac80211: Fix for Rx fragmented action frames
wifi: mac80211: avoid u32_encode_bits() warning
wifi: mac80211: Don't translate MLD addresses for multicast
wifi: cfg80211: call reg_notifier for self managed wiphy from driver hint
wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notify
wifi: nl80211: Allow authentication frames and set keys on NAN interface
wifi: mac80211: fix non-MLO station association
wifi: mac80211: Allow NSS change only up to capability
...
====================
Link: https://lore.kernel.org/r/20230216105406.208416-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrea Mayer says:
====================
seg6: add PSP flavor support for SRv6 End behavior
Segment Routing for IPv6 (SRv6 in short) [1] is the instantiation of the
Segment Routing (SR) [2] architecture on the IPv6 dataplane.
In SRv6, the segment identifiers (SID) are IPv6 addresses and the segment list
(SID List) is carried in the Segment Routing Header (SRH). A segment may be
bound to a specific packet processing operation called "behavior". The RFC8986
[3] defines and standardizes the most common/relevant behaviors for network
operators, e.g., End, End.X and End.T and so on.
The RFC8986 also introduces the "flavors" framework aiming to modify or extend
the capabilities of SRv6 End, End.X and End.T behaviors. Specifically, these
behaviors support the following flavors (either individually or in
combinations):
- Penultimate Segment Pop (PSP);
- Ultimate Segment Pop (USP);
- Ultimate Segment Decapsulation (USD).
Such flavors enable an End/End.X/End.T behavior to pop the SRH on the
penultimate/ultimate SR endpoint node listed in the SID List or to perform a
full decapsulation.
Currently, the Linux kernel supports a large subset of behaviors described in
RFC8986, including the End, End.X and End.T. However, PSP, USP and USD flavors
have not yet been implemented.
In this patchset, we extend the SRv6 subsystem to implement the PSP flavor in
the SRv6 End behavior. To accomplish this task, we leverage the flavor
framework previously introduced by another patchset required for supporting the
efficient representation of the SID List through the NEXT-C-SID mechanism [4].
In details, the patchset is made of:
- patch 1/3: seg6: factor out End lookup nexthop processing to a dedicated
function
- patch 2/3: seg6: add PSP flavor support for SRv6 End behavior
- patch 3/3: selftests: seg6: add selftest for PSP flavor in SRv6 End
behavior
From the user space perspective, we do not need to change the iproute2 code to
support the PSP flavor. However, we provide the man page for the PSP flavor in
a separate patch.
Comments, improvements and suggestions are always appreciated.
[1] - RFC8754: https://datatracker.ietf.org/doc/html/rfc8754
[2] - RFC8402: https://datatracker.ietf.org/doc/html/rfc8402
[3] - RFC8986: https://datatracker.ietf.org/doc/html/rfc8986
[4] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression
====================
Link: https://lore.kernel.org/r/20230215134659.7613-1-andrea.mayer@uniroma2.it
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This selftest is designed for testing the PSP flavor in SRv6 End behavior.
It instantiates a virtual network composed of several nodes: hosts and
SRv6 routers. Each node is realized using a network namespace that is
properly interconnected to others through veth pairs.
The test makes use of the SRv6 End behavior and of the PSP flavor needed
for removing the SRH from the IPv6 header at the penultimate node.
The correct execution of the behavior is verified through reachability
tests carried out between hosts.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The "flavors" framework defined in RFC8986 [1] represents additional
operations that can modify or extend a subset of existing behaviors such as
SRv6 End, End.X and End.T. We report these flavors hereafter:
- Penultimate Segment Pop (PSP);
- Ultimate Segment Pop (USP);
- Ultimate Segment Decapsulation (USD).
Depending on how the Segment Routing Header (SRH) has to be handled, an
SRv6 End* behavior can support these flavors either individually or in
combinations.
In this patch, we only consider the PSP flavor for the SRv6 End behavior.
A PSP enabled SRv6 End behavior is used by the Source/Ingress SR node
(i.e., the one applying the SRv6 Policy) when it needs to instruct the
penultimate SR Endpoint node listed in the SID List (carried by the SRH) to
remove the SRH from the IPv6 header.
Specifically, a PSP enabled SRv6 End behavior processes the SRH by:
i) decreasing the Segment Left (SL) from 1 to 0;
ii) copying the Last Segment IDentifier (SID) into the IPv6 Destination
Address (DA);
iii) removing (i.e., popping) the outer SRH from the extension headers
following the IPv6 header.
It is important to note that PSP operation (steps i, ii, iii) takes place
only at a penultimate SR Segment Endpoint node (i.e., when the SL=1) and
does not happen at non-penultimate Endpoint nodes. Indeed, when a SID of
PSP flavor is processed at a non-penultimate SR Segment Endpoint node, the
PSP operation is not performed because it would not be possible to decrease
the SL from 1 to 0.
SL=2 SL=1 SL=0
| | |
For example, given the SRv6 policy (SID List := < X, Y, Z >):
- a PSP enabled SRv6 End behavior bound to SID "Y" will apply the PSP
operation as Segment Left (SL) is 1, corresponding to the Penultimate
Segment of the SID List;
- a PSP enabled SRv6 End behavior bound to SID "X" will *NOT* apply the
PSP operation as the Segment Left is 2. This behavior instance will
apply the "standard" End packet processing, ignoring the configured PSP
flavor at all.
[1] - RFC8986: https://datatracker.ietf.org/doc/html/rfc8986
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The End nexthop lookup/input operations are moved into a new helper
function named input_action_end_finish(). This avoids duplicating the
code needed to compute the nexthop in the different flavors of the End
behavior.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alejandro Lucero says:
====================
sfc: devlink support for ef100
This patchset adds devlink port support for ef100 allowing setting VFs
mac addresses through the VF representor devlink ports.
Basic devlink infrastructure is first introduced, then support for info
command. Next changes for enumerating MAE ports which will be used for
devlink port creation when netdevs are registered.
Adding support for devlink port_function_hw_addr_get requires changes in
the ef100 driver for getting the mac address based on a client handle.
This allows to obtain VFs mac addresses during netdev initialization as
well what is included in patch 6.
Such client handle is used in patches 7 and 8 for getting and setting
devlink port addresses.
====================
Link: https://lore.kernel.org/r/20230215090828.11697-1-alejandro.lucero-palau@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Using the builtin client handle id infrastructure, add support for
setting the mac address linked to mports in ef100. This implies to
execute an MCDI command for giving the address to the firmware for
the specific devlink port.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Using the builtin client handle id infrastructure, add support for
obtaining the mac address linked to mports in ef100. This implies
to execute an MCDI command for getting the data from the firmware
for each devlink port.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Getting device mac address is currently based on a specific MCDI command
only available for the PF. This patch changes the MCDI command to a
generic one for PFs and VFs based on a client handle. This allows both
PFs and VFs to ask for their mac address during initialization using the
CLIENT_HANDLE_SELF.
Moreover, the patch allows other client handles which will be used by
the PF to ask for mac addresses linked to VFs. This is necessary for
suporting the port_function_hw_addr_get devlink function in further
patches.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Using the data when enumerating mports, create devlink ports just before
netdevs are registered and remove those devlink ports after netdev has
been unregistered.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Obtaining mport id is based on asking the firmware about it. This is
still needed for mport initialization itself, but once the mport data is
now kept by the driver, further mport id request can be satisfied
internally without firmware interaction.
Previous function is just modified in name making clear the firmware
interaction. The new function uses the old name and looks for the data
in the mport data structure.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
MAE ports (mports) are the ports on the EF100 embedded switch such
as networking PCIe functions, the physical port, and potentially
others.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add devlink info support for ef100. The information reported is obtained
through the MCDI interface with the specific meaning defined in new
documentation file.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add devlink infrastructure support. Further patches add devlink
info and devlink port support.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
