All amba drivers return 0 in their remove callback. Together with the
driver core ignoring the return value anyhow, it doesn't make sense to
return a value here.
Change the remove prototype to return void, which makes it explicit that
returning an error value doesn't work as expected. This simplifies changing
the core remove callback to return void, too.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # for drivers/memory
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for hwtracing/coresight
Acked-By: Vinod Koul <vkoul@kernel.org> # for dmaengine
Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Takashi Iwai <tiwai@suse.de> # for sound
Acked-by: Vladimir Zapolskiy <vz@mleia.com> # for memory/pl172
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
After extending v7s, our pagetable already support iova reach
16GB(34bit). the master got the iova via dma_alloc_attrs may reach
34bits, but its HW register still is 32bit. then how to set the
bit32/bit33 iova? this depend on a SMI larb setting(bank_sel).
we separate whole 16GB iova to four banks:
bank: 0: 0~4G; 1: 4~8G; 2: 8-12G; 3: 12-16G;
The bank number is (iova >> 32).
We will preassign which bank the larbs belong to. currently we don't
have a interface for master to adjust its bank number.
Each a bank is a iova_region which is a independent iommu-domain.
the iova range for each iommu-domain can't cross 4G.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> #for memory part
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-31-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Use the common memory header(larb-port) in the source code.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-9-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
There is no point calling dev_pm_opp_set_clkname() with the "name"
parameter set to NULL, this is already done by the OPP core at setup
time and should work as it is.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/0f22cc1791d8b88c50a9790c2dc19455b34ec7b0.1611742564.git.viresh.kumar@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add support for building the SMI driver as module. Switch MTK_SMI to
tristate, and add module_exit/module_license.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210126060055.11050-1-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Call of_node_put() to decrement the reference count of the child node
child_np when jumping out of the loop body of
for_each_available_child_of_node(), which is a macro that increments and
decrements the reference count of child node. If the loop is broken, the
reference of the child node should be dropped manually.
Fixes: 5a7c81547c ("memory: ti-aemif: introduce AEMIF driver")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121090359.61763-1-bianpan2016@163.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Check whether memory client reset is already asserted in order to prevent
DMA-flush error on trying to re-assert an already asserted reset.
This becomes a problem once PMC GENPD is enabled to use memory resets
since GENPD will get a error and fail to toggle power domain. PMC GENPDs
can't be toggled safely without holding memory reset on Tegra and we're
about to fix this.
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210119235210.13006-1-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This driver is for the EMIF private feature implemented under FPGA
Device Feature List (DFL) framework. It is used to expose memory
interface status information as well as memory clearing control.
The purpose of memory clearing block is to zero out all private memory
when FPGA is to be reprogrammed. This gives users a reliable method to
prevent potential data leakage.
[mdf@kernel.org: Fixed up ABI doc]
Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20210107043714.991646-9-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Renesas RPC-IF is present on the RZ/G2 Series. Add that to
the description.
Suggested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210102115412.3402059-2-aford173@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Now Internal and External memory controllers are memory interconnection
providers. This allows us to use interconnect API for tuning of memory
configuration. EMC driver now supports OPPs and DVFS.
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201228154920.18846-4-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
EMC driver will become mandatory after turning it into interconnect
provider because interconnect users, like display controller driver, will
fail to probe using newer device-trees that have interconnect properties.
Thus make EMC driver to probe even if timings are missing in device-tree.
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201228154920.18846-3-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add modularization support to the Tegra124 EMC driver, which now can be
compiled as a loadable kernel module.
Note that EMC clock must be registered at clk-init time, otherwise PLLM
will be disabled as unused clock at boot time if EMC driver is compiled
as a module. Hence add a prepare/complete callbacks. similarly to what is
done for the Tegra20/30 EMC drivers.
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201228154920.18846-2-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Spinlock can be initialized automatically with DEFINE_SPINLOCK() rather
than explicitly calling spin_lock_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20201228135056.28511-1-zhengyongjun3@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.
Fixes: 4f0a1a1ae3 ("memory: mtk-smi: Invoke pm runtime_callback to enable clocks")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201123102118.3866195-1-zhangqilong3@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Memory controller drivers for v5.11 - Tegra SoC, part two
Continuation of work on Tegra SoC memory controllers towards adding
interconnect support and integration with devfreq.
This brings few more patches including one which removes/fixes annoying
warning if the DTS patches get applied. This is expected and only
informs that new features of Tegra memory controller drivers will not be
enabled however the warning itself could look worrying.
* tag 'memory-controller-drv-tegra-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra30: Support interconnect framework
memory: tegra20: Support hardware versioning and clean up OPP table initialization
dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
Link: https://lore.kernel.org/r/20201207075758.5501-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Memory controller drivers for v5.11, part two
1. Several fixes for Renesas RPC-IF driver.
2. Correct compile testing of TI EMIF SRAM driver.
3. Fix potential NULL pointer in JZ4780 NEMC driver.
* tag 'memory-controller-drv-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
memory: ti-emif-sram: only build for ARMv7
memory: renesas-rpc-if: Make rpcif_enable/disable_rpm() as static inline
memory: renesas-rpc-if: Fix a node reference leak in rpcif_probe()
memory: renesas-rpc-if: Fix unbalanced pm_runtime_enable in rpcif_{enable,disable}_rpm
memory: renesas-rpc-if: Return correct value to the caller of rpcif_manual_xfer()
Link: https://lore.kernel.org/r/20201207075758.5501-1-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
platform_get_resource() may fail and return NULL, so we should
better check it's return value to avoid a NULL pointer dereference
a bit later in the code.
This is detected by Coccinelle semantic patch.
Fixes: 911a888297 ("memory: jz4780-nemc: driver for the NEMC on JZ4780 SoCs")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/1607070717-32880-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The driver can be compile-tested on all ARM machines, but
causes a failure when built for ARMv7-M:
arm-linux-gnueabi-ld: error: drivers/memory/ti-emif-sram-pm.o: conflicting architecture profiles A/M
Limit the target machines to configurations that have ARMv7 enabled.
Fixes: ea0c0ad6b6 ("memory: Enable compile testing for most of the drivers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201203230832.1481767-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Now Internal and External memory controllers are memory interconnection
providers. This allows us to use interconnect API for tuning of memory
configuration. EMC driver now supports OPPs and DVFS. MC driver now
supports tuning of memory arbitration latency, which needs to be done
for ISO memory clients, like a Display client for example.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Acked-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201203192439.16177-4-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Support hardware versioning, which is now required for Tegra20 EMC OPP.
Clean up OPP table initialization by using a error code returned by OPP
API for judging about the OPP table presence in a device-tree and remove
OPP regulator initialization because we're now going to use power domain
instead of a raw regulator. This puts Tegra20 EMC OPP preparation on par
with the Tegra30/124 EMC drivers.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201203192439.16177-3-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Define rpcif_enable_rpm() and rpcif_disable_rpm() as static
inline in the header instead of exporting them.
Suggested-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Pavel Machek (CIP) <pavel@denx.de>
Link: https://lore.kernel.org/r/20201126191146.8753-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
In the error path of rpcif_manual_xfer() the value of ret is overwritten
by value returned by reset_control_reset() function and thus returning
incorrect value to the caller.
This patch makes sure the correct value is returned to the caller of
rpcif_manual_xfer() by dropping the overwrite of ret in error path.
Also now we ignore the value returned by reset_control_reset() in the
error path and instead print a error message when it fails.
Fixes: ca7d8b980b ("memory: add Renesas RPC-IF driver")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Pavel Machek (CIP) <pavel@denx.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201126191146.8753-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
There is a bigger work from Dmitry Osipenko around Tegra SoC memory
controller drivers, mostly towards adding interconnect support and
integration with devfreq. This work touches all Tegra memory controller
drivers and also few other SoC-related parts. It's not yet finished but
the intermediate stage seems ready to merge.
Beside that Tegra 210 memory controller got few fixes and received new
swgroups (work of Nicolin Chen).
-----BEGIN PGP SIGNATURE-----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=EUPM
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-tegra-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.11 - Tegra SoC
There is a bigger work from Dmitry Osipenko around Tegra SoC memory
controller drivers, mostly towards adding interconnect support and
integration with devfreq. This work touches all Tegra memory controller
drivers and also few other SoC-related parts. It's not yet finished but
the intermediate stage seems ready to merge.
Beside that Tegra 210 memory controller got few fixes and received new
swgroups (work of Nicolin Chen).
* tag 'memory-controller-drv-tegra-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: (38 commits)
memory: tegra30-emc: Remove unnecessary of_node_put in tegra_emc_probe
memory: tegra: Complete tegra210_swgroups
memory: tegra30-emc: Continue probing if timings are missing in device-tree
memory: tegra30-emc: Make driver modular
memory: tegra30: Add FIFO sizes to memory clients
memory: tegra20-emc: Add devfreq support
memory: tegra20-emc: Remove IRQ number from error message
memory: tegra20-emc: Factor out clk initialization
memory: tegra20-emc: Use dev_pm_opp_set_clkname()
memory: tegra: Correct stub of devm_tegra_memory_controller_get()
memory: tegra20: Support interconnect framework
memory: tegra20-emc: Continue probing if timings are missing in device-tree
memory: tegra20-emc: Make driver modular
memory: tegra-mc: Add interconnect framework
memory: tegra: Add missing latency allowness entry for Page Table Cache
memory: tegra: Remove superfluous error messages around platform_get_irq()
memory: tegra: Use devm_platform_ioremap_resource()
memory: tegra: Add and use devm_tegra_memory_controller_get()
dt-bindings: host1x: Document new interconnect properties
dt-bindings: tegra30-actmon: Document OPP and interconnect properties
...
Link: https://lore.kernel.org/r/20201126191241.23302-1-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Clang warns:
drivers/memory/tegra/tegra30-emc.c:1275:15: warning: variable 'np' is uninitialized when used here [-Wuninitialized]
of_node_put(np);
^~
drivers/memory/tegra/tegra30-emc.c:1269:24: note: initialize the variable 'np' to silence this warning
There does not need to be an of_node_put call in this error handling
block after the shuffling of the np assignment. Remove it so there is
no use of uninitialized memory.
Fixes: 5e00fd90183a ("memory: tegra30-emc: Continue probing if timings are missing in device-tree")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201119195244.1517236-1-natechancellor@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
According to Tegra X1 TRM, there are missing swgroups in the
tegra210_swgroups list. So this patch adds them to the list.
Note that the TEGRA_SWGROUP_GPU (in list) should be actually
TEGRA_SWGROUP_GPUB (in TRM), yet TEGRA_SWGROUP_GPU (in TRM) is not being
used -- only TEGRA_SWGROUP_GPUB (in TRM) is. So this patch does not add
TEGRA_SWGROUP_GPU (in TRM) and keeps TEGRA_SWGROUP_GPU (in list)
as it is.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201008003746.25659-6-nicoleotsuka@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
EMC driver will become mandatory after turning it into interconnect
provider because interconnect users, like display controller driver, will
fail to probe using newer device-trees that have interconnect properties.
Thus make EMC driver to probe even if timings are missing in device-tree.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201111011456.7875-9-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add modularization support to the Tegra30 EMC driver, which now can be
compiled as a loadable kernel module.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201111011456.7875-8-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The latency allowness is calculated based on buffering capabilities of
memory clients. Add FIFO sizes to the Tegra30 memory clients.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201111011456.7875-7-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add devfreq support to the Tegra20 EMC driver. Memory utilization
statistics will be periodically polled from the memory controller and
appropriate minimum clock rate will be selected by the devfreq governor.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20201111011456.7875-5-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Remove IRQ number from error message since it doesn't add any useful
information, especially because this number is virtual.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201111011456.7875-6-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Factor out clk initialization and make it resource-managed. This makes
easier to follow code and will help to make further changes cleaner.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201111011456.7875-4-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The dev_pm_opp_get_opp_table() shouldn't be used by drivers, use
dev_pm_opp_set_clkname() instead.
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201111011456.7875-3-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Now Internal and External Memory Controllers are memory interconnection
providers. This allows us to use interconnect API for tuning of memory
configuration. EMC driver now supports OPPs and DVFS.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201104164923.21238-36-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
EMC driver will become mandatory after turning it into interconnect
provider because interconnect users, like display controller driver, will
fail to probe using newer device-trees that have interconnect properties.
Thus make EMC driver to probe even if timings are missing in device-tree.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201104164923.21238-35-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add modularization support to the Tegra20 EMC driver, which now can be
compiled as a loadable kernel module.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201104164923.21238-34-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add common SoC-agnostic ICC framework which turns Tegra Memory Controller
into a memory interconnection provider. This allows us to use interconnect
API for tuning of memory configurations.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Link: https://lore.kernel.org/r/20201104164923.21238-33-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add missing PTC memory client latency allowness entry to the Tegra MC
drivers.
This prevents erroneous clearing of MC_INTSTATUS 0x0 register during
of the LA programming in tegra_mc_setup_latency_allowance() due to the
missing entry. Note that this patch doesn't fix any known problems.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201104164923.21238-32-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The platform_get_irq() prints error message telling that interrupt is
missing, hence there is no need to duplicated that message in the drivers.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201104164923.21238-31-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Use devm_platform_ioremap_resource() helper which makes code a bit
cleaner.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201104164923.21238-30-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Multiple Tegra drivers need to retrieve Memory Controller and there is
duplication of the retrieval code among the drivers.
Add new devm_tegra_memory_controller_get() helper to remove the code's
duplication and to fix put_device() which was missed in the duplicated
code. Make EMC drivers to use the new helper.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201104164923.21238-29-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The pl353-smc driver uses module_amba_driver so it has a build
dependency on CONFIG_ARM_AMBA:
/usr/bin/arm-linux-gnueabi-ld: drivers/memory/pl353-smc.o: in function `pl353_smc_driver_init':
pl353-smc.c:(.init.text+0x10): undefined reference to `amba_driver_register'
However it still can be compile tested on platforms other than ARM,
which in practice is limited to those selecting ARM_AMBA (so only
ARM64).
Fixes: ea0c0ad6b6 ("memory: Enable compile testing for most of the drivers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20201029193357.389593-1-krzk@kernel.org
Cleanup the list of swgroups (ordering by register address) to prepare
for new ones.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201008003746.25659-4-nicoleotsuka@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Some def values are mismatched with Tegra X1 TRM, probably because
being copied from tegra124.c file.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201008003746.25659-3-nicoleotsuka@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
According to Tegra X1 TRM, ALLOWANCE_SESWR is located in field
[23:16] of register at address 0x3e0 with a reset value of 0x80
at register 0x3e0, while bit-1 of register 0xb98 is for enable
bit of seswr.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201008003746.25659-2-nicoleotsuka@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The devm_ioremap() function returns NULL on error, it doesn't return
error pointers. This bug could lead to an Oops during probe.
Fixes: f046e4a3f0 ("memory: jz4780_nemc: Only request IO memory the driver will use")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200803143607.GC346925@mwanda
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Various driver updates for platforms. A bulk of this is smaller fixes or
cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs
and platforms.
-----BEGIN PGP SIGNATURE-----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=tfPb
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms. A bulk of this is smaller fixes
or cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs and
platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
drm/mediatek: reduce clear event
soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
soc: mediatek: cmdq: add jump function
soc: mediatek: cmdq: add write_s_mask value function
soc: mediatek: cmdq: add write_s value function
soc: mediatek: cmdq: add read_s function
soc: mediatek: cmdq: add write_s_mask function
soc: mediatek: cmdq: add write_s function
soc: mediatek: cmdq: add address shift in jump
soc: mediatek: mtk-infracfg: Fix kerneldoc
soc: amlogic: pm-domains: use always-on flag
reset: sti: reset-syscfg: fix struct description warnings
reset: imx7: add the cm4 reset for i.MX8MQ
dt-bindings: reset: imx8mq: add m4 reset
reset: Fix and extend kerneldoc
reset: reset-zynqmp: Added support for Versal platform
dt-bindings: reset: Updated binding for Versal reset driver
reset: imx7: Support module build
soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
soc: fsl: qman: convert to use be32_add_cpu()
...
Including:
- ARM-SMMU Updates from Will:
- Continued SVM enablement, where page-table is shared with
CPU
- Groundwork to support integrated SMMU with Adreno GPU
- Allow disabling of MSI-based polling on the kernel
command-line
- Minor driver fixes and cleanups (octal permissions, error
messages, ...)
- Secure Nested Paging Support for AMD IOMMU. The IOMMU will
fault when a device tries DMA on memory owned by a guest. This
needs new fault-types as well as a rewrite of the IOMMU memory
semaphore for command completions.
- Allow broken Intel IOMMUs (wrong address widths reported) to
still be used for interrupt remapping.
- IOMMU UAPI updates for supporting vSVA, where the IOMMU can
access address spaces of processes running in a VM.
- Support for the MT8167 IOMMU in the Mediatek IOMMU driver.
- Device-tree updates for the Renesas driver to support r8a7742.
- Several smaller fixes and cleanups all over the place.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAl+Fy9MACgkQK/BELZcB
GuNxtRAA0TdYHXt6XyLWmvRAX/ySZSz6KOneZWWwpsQ9wh2/iv1PtBsrV0ltf+6g
CaX4ROZUVRbV9wPD+7maBRbzxrG3QhfEaaV+K45Q2J/QE1wjkyV8qj1eORWTUUoc
nis4FhGDKk2ER/Gsajy2Hjs4+6i43gdWG/+ghVGaCRo8mCZyoz1/6AyMQyN3deuO
NqWOv9E7hsavZjRs/w/LXG7eSE20cZwtt//kPVJF0r9eQqC6i1eJDQj48iRqJVqd
R0dwBQZaLz++qQptyKebDNlmH/3aAsb+A8nCeS7ZwHqWC1QujTWOUYWpFyPPbOmC
KVsQXzTzRfnVTDECF1Pk5d3yi45KILLU3B4zDJfUJjbL3KDYjuVUvhHF/pcGcjC3
H1LWJqHSAL8sJwHvKhpi0VtQ5SOxXnLO5fGG/CZT/Xb4QyM+mkwkFLdn1TryZTR/
M4XA+QuI96TzY7HQUJdSoEDANxoBef6gPnxdDKOnK1v4hfNsPAl7o8hZkM3w0DK8
GoFZUV+vjBhFcymGcQegSNiea28Hfi+hBe+PPHCmw+tJm47cketD5uP5jJ5NGaUe
MKU/QXWXc6oqeBTQT6ki5zJbJXKttbPa8eEmp+FrMatc9kruvBVhQoMbj7Vd3CA1
dC4zK9Awy7yj24ZhZfnAFx2DboCmBTUI3QKjDt9K5PRZyMeyoP8=
=C0Sg
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- ARM-SMMU Updates from Will:
- Continued SVM enablement, where page-table is shared with CPU
- Groundwork to support integrated SMMU with Adreno GPU
- Allow disabling of MSI-based polling on the kernel command-line
- Minor driver fixes and cleanups (octal permissions, error
messages, ...)
- Secure Nested Paging Support for AMD IOMMU. The IOMMU will fault when
a device tries DMA on memory owned by a guest. This needs new
fault-types as well as a rewrite of the IOMMU memory semaphore for
command completions.
- Allow broken Intel IOMMUs (wrong address widths reported) to still be
used for interrupt remapping.
- IOMMU UAPI updates for supporting vSVA, where the IOMMU can access
address spaces of processes running in a VM.
- Support for the MT8167 IOMMU in the Mediatek IOMMU driver.
- Device-tree updates for the Renesas driver to support r8a7742.
- Several smaller fixes and cleanups all over the place.
* tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (57 commits)
iommu/vt-d: Gracefully handle DMAR units with no supported address widths
iommu/vt-d: Check UAPI data processed by IOMMU core
iommu/uapi: Handle data and argsz filled by users
iommu/uapi: Rename uapi functions
iommu/uapi: Use named union for user data
iommu/uapi: Add argsz for user filled data
docs: IOMMU user API
iommu/qcom: add missing put_device() call in qcom_iommu_of_xlate()
iommu/arm-smmu-v3: Add SVA device feature
iommu/arm-smmu-v3: Check for SVA features
iommu/arm-smmu-v3: Seize private ASID
iommu/arm-smmu-v3: Share process page tables
iommu/arm-smmu-v3: Move definitions to a header
iommu/io-pgtable-arm: Move some definitions to a header
iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer
iommu/amd: Re-purpose Exclusion range registers to support SNP CWWB
iommu/amd: Add support for RMP_PAGE_FAULT and RMP_HW_ERR
iommu/amd: Use 4K page for completion wait write-back semaphore
iommu/tegra-smmu: Allow to group clients in same swgroup
iommu/tegra-smmu: Fix iova->phys translation
...
Previously, devfreq core support 'devfreq-events' property in order to get
the devfreq-event device by phandle. But, 'devfreq-events' property name is
not proper on devicetree binding because this name doesn't mean
the any h/w attribute.
The devfreq-event core hand over the rights to decide the property name
for getting the devfreq-event device on devicetree. Each devfreq-event driver
will decide the property name on devicetree binding and then pass
the their own property name to devfreq_event_get_edev_by_phandle function.
And change the prototype of devfreq_event_get_edev_count function
because of used deprecated 'devfreq-events' property.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Along with this change, we get additionally:
.owner = THIS_MODULE,
.llseek = seq_lseek,
1. The llseek method is used to change the current read/write position
in a file which can be ignored if you don't use it.
2. The owner is not even a method. Instead, it is a pointer to the
module that “owns” this structure; it is used by the kernel to maintain
the module's usage count which can be ignored.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20200917125113.103550-1-miaoqinglang@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
According to Tegra210 TRM, the default value of TLB_ACTIVE_LINES
field of register MC_SMMU_TLB_CONFIG_0 is 0x30. So num_tlb_lines
should be 48 (0x30) rather than 32 (0x20).
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200917113155.13438-3-nicoleotsuka@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
SPARC comes without CONFIG_OF_ADDRESS thus compile testing fails on
linking:
/usr/bin/sparc64-linux-gnu-ld: drivers/memory/omap-gpmc.o: in function `gpmc_probe_generic_child':
omap-gpmc.c:(.text.unlikely+0x14ec): undefined reference to `of_platform_device_create'
Fixes: ea0c0ad6b6 ("memory: Enable compile testing for most of the drivers")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20200911143251.399-1-krzk@kernel.org
In function tegra210_emc_r21021_periodic_compensation when calculate
emc_cfg EMC_CFG_DRAM_CLKSTOP_PD is duplicated.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20200903021542.315195-1-yebin10@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
platform_get_irq() returns -ERRNO on error. In such case comparison
to 0 would pass the check.
Fixes: 54afbec0d5 ("memory: Freescale CoreNet Coherency Fabric error reporting driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200827073315.29351-1-krzk@kernel.org
If CONFIG_OF is not set, make W=1 warns:
drivers/memory/omap-gpmc.c:987:12: warning: ‘gpmc_cs_remap’ defined but not used [-Wunused-function]
drivers/memory/omap-gpmc.c:926:20: warning: ‘gpmc_cs_get_name’ defined but not used [-Wunused-function]
drivers/memory/omap-gpmc.c:919:13: warning: ‘gpmc_cs_set_name’ defined but not used [-Wunused-function]
Move them to #ifdef CONFIG_OF block to fix this.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20200901112832.3084-1-yuehaibing%40huawei.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Commit 63a613fdb1 ("memory: tegra: Add gr2d and gr3d to DRM IOMMU
group") added the GPU to the DRM IOMMU group, which doesn't make any
sense. This causes problems when Nouveau tries to attach to the SMMU
and causes it to fall back to using the DMA API.
Remove the GPU from the DRM groups to restore the old behaviour. The
GPU should always have its own IOMMU domain to make sure it can map
buffers into contiguous chunks (for big page support) without getting
in the way of mappings from the DRM group.
Cc: <stable@vger.kernel.org>
Fixes: 63a613fdb1 ("memory: tegra: Add gr2d and gr3d to DRM IOMMU group")
Reported-by: Matias Zuniga <matias.nicolas.zc@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200901153248.1831263-1-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Link: https://lore.kernel.org/r/20200828153747.22358-1-krzk@kernel.org
Add missing kerneldoc to struct exynos5_dmc and correct the existing
kerneldoc in other places to fix W=1 warnings like:
drivers/memory/samsung/exynos5422-dmc.c:107: warning: Function parameter or member 'freq_hz' not described in 'dmc_opp_table'
drivers/memory/samsung/exynos5422-dmc.c:154: warning: Function parameter or member 'dev' not described in 'exynos5_dmc'
drivers/memory/samsung/exynos5422-dmc.c:357: warning: Excess function parameter 'param' description in 'exynos5_set_bypass_dram_timings'
drivers/memory/samsung/exynos5422-dmc.c:630: warning: Function parameter or member 'flags' not described in 'exynos5_dmc_get_volt_freq'
drivers/memory/samsung/exynos5422-dmc.c:962: warning: cannot understand function prototype: 'struct devfreq_dev_profile exynos5_dmc_df_profile = '
drivers/memory/samsung/exynos5422-dmc.c:1011: warning: Function parameter or member 'reg_timing_row' not described in 'create_timings_aligned'
drivers/memory/samsung/exynos5422-dmc.c:1011: warning: Excess function parameter 'idx' description in 'create_timings_aligned'
drivers/memory/samsung/exynos5422-dmc.c:1345: warning: Excess function parameter 'set' description in 'exynos5_dmc_set_pause_on_switching'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20200822163218.21857-3-krzk@kernel.org
The struct exynos5_dmc members bypass_rate, mx_mspll_ccore_phy,
mout_mx_mspll_ccore_phy and opp_bypass are not actually used.
Apparently there was a plan to store the OPP for the bypass mode in
opp_bypass member, but driver fails to do it and instead always sets
target voltage during bypass mode.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200822163218.21857-2-krzk@kernel.org
The driver has file-scope arrays defining fields of timing registers
(e.g. struct timing_reg timing_row) and actual values for these
registers per each OPP in state container (struct
exynos5_dmc.timing_row). The meanings of these are different so use
different names to avoid confusion.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20200822163218.21857-1-krzk@kernel.org
Callers are generally not supposed to check the return values from
debugfs functions. Debugfs functions never return NULL so this error
handling will never trigger. (Historically debugfs functions used to
return a mix of NULL and error pointers but it was eventually deemed too
complicated for something which wasn't intended to be used in normal
situations).
Delete all the error handling.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Link: https://lore.kernel.org/r/20200826113759.GF393664@mwanda
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
If CONFIG_OF is n, gcc fails:
drivers/memory/omap-gpmc.o: In function `gpmc_omap_onenand_set_timings':
omap-gpmc.c:(.text+0x2a88): undefined reference to `gpmc_read_settings_dt'
Add gpmc_read_settings_dt() helper function, which zero the gpmc_settings
so the caller doesn't proceed with random/invalid settings.
Fixes: a758f50f10 ("mtd: onenand: omap2: Configure driver from DT")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20200827125316.20780-1-yuehaibing@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
These comparisons should be >= instead of > to prevent reading one
element beyond the end of the gpmc_cs[] array.
Fixes: cdd6928c58 ("ARM: OMAP2+: Add device-tree support for NOR flash")
Fixes: f37e4580c4 ("ARM: OMAP2: Dynamic allocator for GPMC memory space")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20200825104707.GB278587@mwanda
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
We would overrun the error_text array if we hit a TIMEOUT condition,
because we were using the error code "ETIMEDOUT" (which is 110) as an
array index.
We fix the problem by correcting the array index and by providing a
function to retrieve error messages rather than accessing the array
directly. The function includes a bounds check that prevents the array
from being overrun.
Link: https://lore.kernel.org/linux-arm-kernel/38d00022-730c-948a-917c-d86382df8cb9@canonical.com/
Link: https://lore.kernel.org/r/20200822205000.15841-1-mmayer@broadcom.com
Fixes: 2f330caff5 ("memory: brcmstb: Add driver for DPFE")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
In brcmstb_dpfe_download_firmware(), memory is allocated to variable fw by
firmware_request_nowarn(), but never released. Fix up to release fw on
all return paths.
Cc: <stable@vger.kernel.org>
Fixes: 2f330caff5 ("memory: brcmstb: Add driver for DPFE")
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200820172118.781324-1-alex.dewar90@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
According to Tegra X1 (Tegra210) TRM, the APEW field is between
[23:16] so the shift bit for apew should be 16 accordingly.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20200818095121.13645-1-nicoleotsuka@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Most of the memory controller drivers do not depend on architecture
specific code so can be compile tested to increase build coverage.
When compile tested, do not enable them by default.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200724074038.5597-7-krzk@kernel.org
Add separate entry for Broadcom STB DPFE driver, enabled by default on
ARCH_BRCMSTB. This allows compile testing.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Since driver tracks reserved memory, freeing a non-reserved GPMC should
not be fatal and crash the system. Printing a warning is friendlier.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200724182328.3348-9-krzk@kernel.org
The GPMC_SET_ONE_CD_MAX macro uses return statement and variable 'cs'
coming from called scope. This is not a good practice. Also
checkpatch complained:
WARNING: Macros with flow control statements should be avoided
ERROR: Macros starting with if should be enclosed by a do - while
loop to avoid possible if/else logic defects
Since GPMC_SET_ONE_CD_MAX macro just calls one function, it can be open
coded. The difference with original code is that function will exit on
error not after every register set, but after a group of sets.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200724074038.5597-22-krzk@kernel.org
The callers of gpmc_cs_set_timings() expect to receive -ERRNO on errors
and they pass further what they have received.
However gpmc_cs_set_timings() was returning -1 (equal to -EPERM) which
does not make sense in this context.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200724074038.5597-21-krzk@kernel.org
The file-scope variables phys_base and mem_size are assigned in
gpmc_probe() but never read.
This fixes build error when compile testing on x86_64 architecture:
drivers/memory/omap-gpmc.c:246:24: error: conflicting types for ‘phys_base’
static resource_size_t phys_base, mem_size;
In file included from arch/x86/include/asm/page.h:12:0,
from arch/x86/include/asm/thread_info.h:12,
from include/linux/thread_info.h:38,
from arch/x86/include/asm/preempt.h:7,
from include/linux/preempt.h:78,
from include/linux/spinlock.h:51,
from include/linux/irq.h:14,
from drivers/memory/omap-gpmc.c:12:
arch/x86/include/asm/page_64.h:12:22: note: previous declaration of ‘phys_base’ was here
extern unsigned long phys_base;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200724074038.5597-3-krzk@kernel.org
The driver does not use macros from asm/mach-types.h (neither MACH_TYPE
nor machine_is_xxx()). Removal of this include allows compile testing
on non-ARM architectures which lack this header.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200724074038.5597-2-krzk@kernel.org
The 'curr_rate' is protected by local 'dmc->lock' in various places, but
not in a function exynos5_dmc_get_status(). The lock protects frequency
(and voltage) change process and the corresponding value stored in
'curr_rate'. Add the locking mechanism to protect the 'curr_rate' reading
also in the exynos5_dmc_get_status().
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20200811101727.3976-1-lukasz.luba@arm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Including:
- Removal of the dev->archdata.iommu (or similar) pointers from
most architectures. Only Sparc is left, but this is private to
Sparc as their drivers don't use the IOMMU-API.
- ARM-SMMU Updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell
Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d Updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel
drivers into their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test
coverage)
-----BEGIN PGP SIGNATURE-----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=3O2Z
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Remove of the dev->archdata.iommu (or similar) pointers from most
architectures. Only Sparc is left, but this is private to Sparc as
their drivers don't use the IOMMU-API.
- ARM-SMMU updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel drivers into
their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test coverage)
* tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits)
iommu/amd: Move Kconfig and Makefile bits down into amd directory
iommu/vt-d: Move Kconfig and Makefile bits down into intel directory
iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory
iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu
iommu: Add gfp parameter to io_pgtable_ops->map()
iommu: Mark __iommu_map_sg() as static
iommu/vt-d: Rename intel-pasid.h to pasid.h
iommu/vt-d: Add page response ops support
iommu/vt-d: Report page request faults for guest SVA
iommu/vt-d: Add a helper to get svm and sdev for pasid
iommu/vt-d: Refactor device_to_iommu() helper
iommu/vt-d: Disable multiple GPASID-dev bind
iommu/vt-d: Warn on out-of-range invalidation address
iommu/vt-d: Fix devTLB flush for vSVA
iommu/vt-d: Handle non-page aligned address
iommu/vt-d: Fix PASID devTLB invalidation
iommu/vt-d: Remove global page support in devTLB flush
iommu/vt-d: Enforce PASID devTLB field mask
iommu: Make some functions static
iommu/amd: Remove double zero check
...
* Spelling
* http to https updates
NAND core changes:
* Drop useless 'depends on' in Kconfig
* Add an extra level in the Kconfig hierarchy
* Trivial spellings
* Dynamic allocation of the interface configurations
* Dropping the default ONFI timing mode
* Various cleanup (types, structures, naming, comments)
* Hide the chip->data_interface indirection
* Add the generic rb-gpios property
* Add the ->choose_interface_config() hook
* Introduce nand_choose_best_sdr_timings()
* Use default values for tPROG_max and tBERS_max
* Avoid redefining tR_max and tCCS_min
* Add a helper to find the closest ONFI mode
* bcm63xx MTD parsers: simplify CFE detection
Raw NAND controller drivers changes:
* fsl-upm: Deprecation of specific DT properties
* fsl_upm: Driver rework and cleanup in favor of ->exec_op()
* Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
* brcmnand: ECC error handling on EDU transfers
* brcmnand: Don't default to EDU transfers
* qcom: Set BAM mode only if not set already
* qcom: Avoid write to unavailable register
* gpio: Driver rework in favor of ->exec_op()
* tango: ->exec_op() conversion
* mtk: ->exec_op() conversion
Raw NAND chip drivers changes:
* toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4
* toshiba: Implement ->choose_interface_config() for TC58NVG0S3E
* toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00
* hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
SPI NOR core changes:
* Disable Quad Mode in spi_nor_restore().
* Don't abort BFPT parsing when QER reserved value is used.
* Add support/update capabilities for few flashes.
* Drop s70fl01gs flash: it does not support RDSR(05h) which
is critical for erase/write.
* Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts
during the release cycle.
SPI NOR controller drivers changes:
* Move the cadence-quadspi driver to spi-mem. The series was
taken through the SPI tree. Merge it also in spi-nor/next
to avoid conflicts during the release cycle.
* intel-spi:
- Add new PCI IDs.
- Ignore the Write Disable command, the controller doesn't
support it.
- Fix performance regression.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl8vJtMACgkQJWrqGEe9
VoRdGAf/Y5m5BwmLilkEYpffyxi7dVR6XOKPLU5EJXkS3dPvH9398zchbHOdedCZ
OzJIfh6Iv+qbkgS2g0lAAT+SAfOfG9plubvSdkjrHXl4eZXRnR/49RF5LAEju7sz
Uw1HdRcawyEi5uI9yYS0tCeVMIUJq+5x7VibH+82yOIdSPc60c7FDc5ih/nVKj/a
Pn9LOzGzkdndcE1b3FcF2Uk/T1YOJx3Yt5ngALlPpJxaDZmQSHtYPuuz8DfUbamf
uj3CkpqYRyT18CzuFvtuba6LyF+donXNJgvl6ivW7dlRSPzSMnDQu7J5bpNhUfcd
p/ZdzX1Jxle4theDm0J9ALsSSM5g2w==
=RiY8
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"MTD core changes:
- Spelling
- http to https updates
NAND core changes:
- Drop useless 'depends on' in Kconfig
- Add an extra level in the Kconfig hierarchy
- Trivial spellings
- Dynamic allocation of the interface configurations
- Dropping the default ONFI timing mode
- Various cleanup (types, structures, naming, comments)
- Hide the chip->data_interface indirection
- Add the generic rb-gpios property
- Add the ->choose_interface_config() hook
- Introduce nand_choose_best_sdr_timings()
- Use default values for tPROG_max and tBERS_max
- Avoid redefining tR_max and tCCS_min
- Add a helper to find the closest ONFI mode
- bcm63xx MTD parsers: simplify CFE detection
Raw NAND controller drivers changes:
- fsl-upm: Deprecation of specific DT properties
- fsl_upm: Driver rework and cleanup in favor of ->exec_op()
- Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
- brcmnand: ECC error handling on EDU transfers
- brcmnand: Don't default to EDU transfers
- qcom: Set BAM mode only if not set already
- qcom: Avoid write to unavailable register
- gpio: Driver rework in favor of ->exec_op()
- tango: ->exec_op() conversion
- mtk: ->exec_op() conversion
Raw NAND chip drivers changes:
- toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4,
TC58NVG0S3E, and TC58TEG5DCLTA00
- hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
SPI NOR core changes:
- Disable Quad Mode in spi_nor_restore().
- Don't abort BFPT parsing when QER reserved value is used.
- Add support/update capabilities for few flashes.
- Drop s70fl01gs flash: it does not support RDSR(05h) which is
critical for erase/write.
- Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during
the release cycle.
SPI NOR controller drivers changes:
- Move the cadence-quadspi driver to spi-mem. The series was taken
through the SPI tree. Merge it also in spi-nor/next to avoid
conflicts during the release cycle.
- intel-spi:
- Add new PCI IDs.
- Ignore the Write Disable command, the controller doesn't support
it.
- Fix performance regression"
* tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits)
MTD: pfow.h: drop a duplicated word
MTD: mtd-abi.h: drop a duplicated word
mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones
mtd: Replace HTTP links with HTTPS ones
mtd: hyperbus: Replace HTTP links with HTTPS ones
mtd: revert "spi-nor: intel: provide a range for poll_timout"
mtd: spi-nor: update read capabilities for w25q64 and s25fl064k
mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g
mtd: spi-nor: macronix: Add support for mx66u2g45g
mtd: spi-nor: intel-spi: Simulate WRDI command
mtd: spi-nor: Disable the flash quad mode in spi_nor_restore()
mtd: spi-nor: Add capability to disable flash quad mode
mtd: spi-nor: spansion: Remove s70fl01gs from flash_info
mtd: spi-nor: sfdp: do not make invalid quad enable fatal
dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags
mtd: rawnand: stm32_fmc2: get resources from parent node
mtd: rawnand: stm32_fmc2: use regmap APIs
memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation
dt-bindings: mtd: update STM32 FMC2 NAND controller documentation
...
- improvements for Loongson64
- extended ingenic support
- removal of not maintained paravirt system type
- cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=I/vU
-----END PGP SIGNATURE-----
Merge tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS upates from Thomas Bogendoerfer:
- improvements for Loongson64
- extended ingenic support
- removal of not maintained paravirt system type
- cleanups and fixes
* tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (81 commits)
MIPS: SGI-IP27: always enable NUMA in Kconfig
MAINTAINERS: Update KVM/MIPS maintainers
MIPS: Update default config file for Loongson-3
MIPS: KVM: Add kvm guest support for Loongson-3
dt-bindings: mips: Document Loongson kvm guest board
MIPS: handle Loongson-specific GSExc exception
MIPS: add definitions for Loongson-specific CP0.Diag1 register
MIPS: only register FTLBPar exception handler for supported models
MIPS: ingenic: Hardcode mem size for qi,lb60 board
MIPS: DTS: ingenic/qi,lb60: Add model and memory node
MIPS: ingenic: Use fw_passed_dtb even if CONFIG_BUILTIN_DTB
MIPS: head.S: Init fw_passed_dtb to builtin DTB
of: address: Fix parser address/size cells initialization
of_address: Guard of_bus_pci_get_flags with CONFIG_PCI
MIPS: DTS: Fix number of msi vectors for Loongson64G
MIPS: Loongson64: Add ISA node for LS7A PCH
MIPS: Loongson64: DTS: Fix ISA and PCI I/O ranges for RS780E PCH
MIPS: Loongson64: Enlarge IO_SPACE_LIMIT
MIPS: Loongson64: Process ISA Node in DeviceTree
of_address: Add bus type match for pci ranges parser
...
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver
and eliminate a redundant static variable from it (Chen Yu,
Rafael Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the
Intel RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to
be specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq
driver (Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal
Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the
MMC jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz
Luba, Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance names
consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander
A. Klimov).
-----BEGIN PGP SIGNATURE-----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=8cUO
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The most significant change here is the extension of the Energy Model
to cover non-CPU devices (as well as CPUs) from Lukasz Luba.
There is also some new hardware support (Ice Lake server idle states
table for intel_idle, Sapphire Rapids and Power Limit 4 support in the
RAPL driver), some new functionality in the existing drivers (eg. a
new switch to disable/enable CPU energy-efficiency optimizations in
intel_pstate, delayed timers in devfreq), some assorted fixes (cpufreq
core, intel_pstate, intel_idle) and cleanups (eg. cpuidle-psci,
devfreq), including the elimination of W=1 build warnings from cpufreq
done by Lee Jones.
Specifics:
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver and
eliminate a redundant static variable from it (Chen Yu, Rafael
Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the Intel
RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to be
specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq driver
(Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the MMC
jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz Luba,
Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance
names consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander A.
Klimov)"
* tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits)
cpuidle: ACPI: fix 'return' with no value build warning
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
intel_idle: Customize IceLake server support
PM / devfreq: Fix the wrong end with semicolon
PM / devfreq: Fix indentaion of devfreq_summary debugfs node
PM / devfreq: Clean up the devfreq instance name in sysfs attr
memory: samsung: exynos5422-dmc: Add module param to control IRQ mode
memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold
memory: samsung: exynos5422-dmc: Use delayed timer as default
PM / devfreq: Add support delayed timer for polling mode
dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle
PM / devfreq: tegra: Add Dmitry as a maintainer
PM / devfreq: event: Fix trivial spelling
PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
cpuidle: change enter_s2idle() prototype
cpuidle: psci: Prevent domain idlestates until consumers are ready
cpuidle: psci: Convert PM domain to platform driver
cpuidle: psci: Fix error path via converting to a platform driver
cpuidle: psci: Fail cpuidle registration if set OSI mode failed
...
A fairly quiet release for SPI, nothing really going on in the core
although there's been quite a bit of driver related activity. This pull
request includes the addition of some shared code in drivers/memory for
the Renesas RPC-IF which is used by a newly added SPI driver, the memory
subsystem doesn't seem to have a fixed maintainer at the minute and this
seemed like the most sensible way to get that hardware supported.
- Quite a few cleanups and optimizations for the Altera, Qualcomm GENI,
sun6i and lantiq drivers.
- Several more GPIO descriptor conversions.
- Move the Cadence QuadSPI driver from drivers/mtd to drivers/spi.
- New support for Mediatek MT8192 and Renesas RPC-IF, R8A7742 and
R8A774e1.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl8oBFoTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0P2UB/47NlDsAadOiOB0ZzPKdn4Nr5BLvUza
TP63gAsxD4BErzgf/p/0D8qUTZPzmlfA833gj9hkIavJlTmv3fGrH0XeHg2OuCJb
yhyw9pE7MPpnARVOJHz1MZkAT/dY+sF3TaUXysmymlvs6CLqRnsLTOwK2f92SeGH
ygpC4J1tfD961xWmv2Zt8wNuQXtH+JePLXeZFSx2ZkpToFT56QO6kFpWjVfDquY4
/F8bc7qyXX6FcsBYAG6Ly35OSxbPazVLkTaDWQr5V4TAD0DXw0NOyvxg2OccqE31
y1jjx3hn98sN73m/VLzlEOer4w9313K5BOISaN0z7TQSQ55XRZKe4EQj
=K1PB
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A fairly quiet release for SPI, nothing really going on in the core
although there's been quite a bit of driver related activity.
This includes the addition of some shared code in drivers/memory for
the Renesas RPC-IF which is used by a newly added SPI driver, the
memory subsystem doesn't seem to have a fixed maintainer at the minute
and this seemed like the most sensible way to get that hardware
supported.
- Quite a few cleanups and optimizations for the Altera, Qualcomm
GENI, sun6i and lantiq drivers.
- Several more GPIO descriptor conversions.
- Move the Cadence QuadSPI driver from drivers/mtd to drivers/spi.
- New support for Mediatek MT8192 and Renesas RPC-IF, R8A7742 and
R8A774e1"
* tag 'spi-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (119 commits)
dt-bindings: lpspi: New property in document DT bindings for LPSPI
spi: lpspi: fix using CS discontinuously on i.MX8DXLEVK
spi: lpspi: remove unused fsl_lpspi->chipselect
spi: lpspi: Fix kernel warning dump when probe fail after calling spi_register
spi: rockchip: Fix error in SPI slave pio read
spi: rockchip: Support 64-location deep FIFOs
spi: rockchip: Config spi rx dma burst size depend on xfer length
spi: spi-topcliff-pch: drop call to wakeup-disable
spi: spidev: Align buffers for DMA
spi: correct kernel-doc inconsistency
spi: sun4i: update max transfer size reported
spi: imx: enable runtime pm support
spi: update bindings for MT8192 SoC
spi: mediatek: add spi support for mt8192 IC
spi: Add bindings for Lightning Mountain SoC
spi: lantiq: Add support to Lightning Mountain SoC
spi: lantiq: Move interrupt configuration to SoC specific data structure
spi: lantiq: Add fifo size bit mask in SoC specific data structure
spi: lantiq: Add support to acknowledge interrupt
spi: lantiq: Move interrupt control register offesets to SoC specific data structure
...
1. Minor cleanups and fixes of multiple memory controller drivers,
mostly around code quality and readability,
2. Add Git repository to drivers/memory entry in MAINTAINERS,
3. Allow MIPS jz4780 FUSE driver to probe by removing conflicting memory
region with jz4780_nemc.
-----BEGIN PGP SIGNATURE-----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=qGyp
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.9, part 2
1. Minor cleanups and fixes of multiple memory controller drivers,
mostly around code quality and readability,
2. Add Git repository to drivers/memory entry in MAINTAINERS,
3. Allow MIPS jz4780 FUSE driver to probe by removing conflicting memory
region with jz4780_nemc.
* tag 'memory-controller-drv-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: jz4780_nemc: Only request IO memory the driver will use
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
Link: https://lore.kernel.org/r/20200729163008.5820-1-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The driver can operate in two modes relaying on devfreq monitoring
mechanism which periodically checks the device status or it can use
interrupts when they are provided by loaded Device Tree. The newly
introduced module parameter can be used to choose between devfreq
monitoring and internal interrupts without modifying the Device Tree.
It also sets devfreq monitoring as default when the parameter is not set
(also the case for default when the driver is not built as a module).
Reported-by: Willy Wolff <willy.mh.wolff.ml@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
In order to react faster and make better decisions under some workloads,
benchmarking the memory subsystem behavior, adjust the polling interval
and upthreshold value used by the simple_ondemand governor.
Reported-by: Willy Wolff <willy.mh.wolff.ml@gmail.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Use delayed timer as default instead of deferrable timer
in order to monitor the DMC status regardless of CPU idle.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Enabling the JZ4780_NEMC driver makes sense only for specific hardware -
the Ingenic SoC architecture. It is not an essential driver for the SoC
support so do not enable it by default.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The driver only uses the registers up to offset 0x54. Since the EFUSE
registers are in the middle of the NEMC registers, we only request
the registers we will use for now - that way the EFUSE driver can
probe too.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/20200728152629.28878-1-paul@crapouillou.net
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Use proper kerneldoc to fix GCC warnings like:
drivers/memory/of_memory.c:30: warning: Function parameter or member 'dev' not described in 'of_get_min_tck'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Remove some unneeded blank lines, align indentation with open
parenthesis (or fix existing alignment).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Use proper kerneldoc to fix GCC warnings like:
drivers/memory/omap-gpmc.c:299: warning: Function parameter or member 'cs' not described in 'gpmc_get_clk_period'
drivers/memory/omap-gpmc.c:432: warning: Excess function parameter 'ma' description in 'get_gpmc_timing_reg'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The drivers/memory directory with memory controller drivers, over the
last days grew in numbers but lacked any coordinated care. The generic
part (device tree helpers) were pulled in through various trees,
depending on driver needs.
The patchset is a first try to improve code quality of memory controller
drivers. Mostly these are non-intrusive fixes for GCC, checkpatch or
sparse warnings. This also fixes missing SPDX tags or improves generic
code quality (whitespace, const correctness).
Last commit appoints also Krzysztof Kozlowski as a maintainer.
-----BEGIN PGP SIGNATURE-----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=8N1k
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers
Memory controller drivers for v5.9
The drivers/memory directory with memory controller drivers, over the
last days grew in numbers but lacked any coordinated care. The generic
part (device tree helpers) were pulled in through various trees,
depending on driver needs.
The patchset is a first try to improve code quality of memory controller
drivers. Mostly these are non-intrusive fixes for GCC, checkpatch or
sparse warnings. This also fixes missing SPDX tags or improves generic
code quality (whitespace, const correctness).
Last commit appoints also Krzysztof Kozlowski as a maintainer.
* tag 'memory-controller-drv-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (22 commits)
MAINTAINERS: Add Krzysztof Kozlowski as maintainer of memory controllers
memory: samsung: exynos-srom: Describe the Kconfig entry
memory: Describe the MEMORY Kconfig entry
memory: da8xx-ddrctl: Remove unused 'node' variable
memory: fsl_ifc: Fix whitespace issues
memory: pl172: Add GPLv2 SPDX license header
memory: omap-gpmc: Fix whitespace issue
memory: omap-gpmc: Include <linux/sizes.h> for SZ_16M
memory: mtk-smi: Add argument to function pointer definition
memory: brcmstb_dpfe: Remove unneeded braces
memory: brcmstb_dpfe: Constify the contents of string
memory: ti-emif-pm: Fix cast to iomem pointer
memory: ti-aemif: Rename SS to SSTROBE to avoid name conflicts
memory: emif: Silence platform_get_irq() error in driver
memory: emif: Fix whitespace coding style violations
memory: emif: Put constant in comparison on the right side
memory: emif-asm-offsets: Add GPLv2 SPDX license header
memory: of: Remove unneeded extern from function declarations
memory: of: Correct indentation
memory: of: Remove __func__ in device related messages
...
Link: https://lore.kernel.org/r/20200724160314.8543-1-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The variable 'node' is not used. Remove it to silence compile warning:
drivers/memory/da8xx-ddrctl.c: In function 'da8xx_ddrctl_probe':
drivers/memory/da8xx-ddrctl.c:105:22: warning: variable 'node' set but not used [-Wunused-but-set-variable]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The driver uses SZ_16M which is defined in include/linux/sizes.h. On
ARM it was pulled by other headers but its inclusion is necessary for
compile testing on other architectures.
This fixes build error when compile testing on i386 architecture:
drivers/memory/omap-gpmc.c: In function ‘gpmc_cs_remap’:
drivers/memory/omap-gpmc.c:961:12: error: ‘SZ_16M’ undeclared (first use in this function)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Fix checkpatch warning:
WARNING: function definition argument 'struct device *' should also have an identifier name
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Single statement blocks don't need braces. Fixes checkpatch warning:
WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
The string itself can be made const for safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
SS conflicts with compile test build on i386:
drivers/memory/ti-aemif.c:40:0: warning: "SS" redefined
In file included from arch/x86/include/uapi/asm/ptrace.h:6:0,
from arch/x86/include/asm/ptrace.h:7,
from arch/x86/include/asm/math_emu.h:5,
from arch/x86/include/asm/processor.h:13,
from include/linux/mutex.h:19,
from include/linux/notifier.h:14,
from include/linux/clk.h:14,
from drivers/memory/ti-aemif.c:12:
arch/x86/include/uapi/asm/ptrace-abi.h:23:0: note: this is the location of the previous definition
#define SS 16
Use more descriptive name (SSTROBE) to avoid the conflict.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The platform_get_irq() already prints error message so there is no need
to do it again in the driver.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Make the code and printed messages slightly more readable. Fixes
checkpatch warnings:
WARNING: quoted string split across lines
ERROR: space prohibited before that ',' (ctx:WxW)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Fixes checkpatch warning:
WARNING: Comparisons should place the constant on the right side of the test
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Function declarations in headers do not need to come with extern
keyword. Remove them to make the declaration slightly shorter.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Messages printed by generic of_memory code will still be using device
context so their location/meaning will be known. Printing __func__ is
not needed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Check for regmap_read() return code before using the read value in
following write in exynos5_switch_timing_regs(). Pass reading error
code to the callers.
This does not introduce proper error handling for such failed reads (and
obviously regmap_write() error is still ignored) because the driver
ignored this in all places. Therefor it only fixes reported issue while
matching current driver coding style:
drivers/memory/samsung/exynos5422-dmc.c: In function 'exynos5_switch_timing_regs':
>> drivers/memory/samsung/exynos5422-dmc.c:216:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Ensure that the driver will bind against the Tegra132 instantiation of
the external memory controller. While the two are roughly the same from
a capability perspective, they do require some incompatible changes to
the programming sequences and therefore need separate compatible
strings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit a127e690b0 ("memory: tegra: Add support for the Tegra194 memory
controller") and commit 4e04b88633 ("memory: tegra: Only include
support for enabled SoCs") incorrectly added the KCONFIG variables
CONFIG_ARCH_TEGRA186_SOC and CONFIG_ARCH_TEGRA194_SOC to the Tegra EMC
driver. These KCONFIG variables do not exist and prevent the EMC driver
from being probed on Tegra186 and Tegra194. These KCONFIG variable
names are simply missing one underscore and so fix this by adding the
necessary underscore to the variable names.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add smi-larb and smi-common nodes and config_port for MT6779.
changelog since v2:
Split basic nodes and config_port support from initial golden setting patch
Signed-off-by: Ming-Fan Chen <ming-fan.chen@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578465691-30692-4-git-send-email-ming-fan.chen@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add the memory driver for Renesas RPC-IF which registers either SPI or
HyperFLash device depending on the contents of the device tree subnode.
It also provides the absract "back end" device APIs that can be used by
the "front end" SPI/MTD drivers to talk to the real hardware.
Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Link: https://lore.kernel.org/r/9a3606ec-d4d0-c63a-4fb6-631ab38e621c@cogentembedded.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The debugfs_create_dir() function never returns NULL and anyway the
correct behavior is to ignore errors in this situation. The
debugfs_create_file() will become a no-op if "emc->debugfs.root" is an
error pointer.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The suspend/resume functions have no callers depending on
configuration, so they must be marked __maybe_unused to
avoid these harmless warnings:
drivers/memory/tegra/tegra186.c:1578:12: error: 'tegra186_mc_resume' defined but not used [-Werror=unused-function]
1578 | static int tegra186_mc_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~
drivers/memory/tegra/tegra186.c:1573:12: error: 'tegra186_mc_suspend' defined but not used [-Werror=unused-function]
1573 | static int tegra186_mc_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~
Fixes: 177602b006 ("memory: tegra: Add system sleep support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra EMC scaling support code is not a clock provider, but merely a
clock consumer, and thus does not need to include
<linux/clk-provider.h>.
Fixes: 0bf368c5b2cf ("memory: tegra: Add EMC scaling support code for Tegra210")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The call to tegra_bpmp_get() must be balanced by a call to
tegra_bpmp_put() in case of error, as already done in the remove
function.
Add an error handling path and corresponding goto.
Fixes: 52d15dd23f ("memory: tegra: Support DVFS on Tegra186 and later")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory clock-rate change could be running on a non-boot CPU, while the
boot CPU handles the EMC interrupt. This introduces an unnecessary latency
since boot CPU should handle the interrupt and then notify the sibling CPU
about clock-rate change completion. In some rare cases boot CPU could be
in uninterruptible state for a significant time (like in a case of KASAN +
NFS root), it could get to the point that completion timeouts before boot
CPU gets a chance to handle interrupt. The solution is to get rid of the
completion and replace it with interrupt-status polling.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory clock-rate change could be running on a non-boot CPU, while the
boot CPU handles the EMC interrupt. This introduces an unnecessary latency
since boot CPU should handle the interrupt and then notify the sibling CPU
about clock-rate change completion. In some rare cases boot CPU could be
in uninterruptible state for a significant time (like in a case of KASAN +
NFS root), it could get to the point that completion timeouts before boot
CPU gets a chance to handle interrupt. The solution is to get rid of the
completion and replace it with interrupt-status polling.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Derated timings are used to ensure that the memory chips keep operating
correctly at high temperatures. This adds code to support polling of the
chip operating state when high temperatures are measured on the chip and
change the refresh mode accordingly. Under very high temperatures, the
driver will switch to the derated tables to ensure proper operation of
the memory chips.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch includes the sequence for clock tuning and the dynamic
training mechanism for the clock above 800MHz.
And historically there have been different sequences to change the EMC
clock. The sequence to be used is specified in the EMC table.
However, for the currently supported upstreaming platform, only the most
recent sequence is used. So only support that in this patch.
Based on the work of Peter De Schrijver <pdeschrijver@nvidia.com>.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This is the initial patch for Tegra210 EMC frequency scaling. It has the
code to program various aspects of the EMC that are standardized, but it
does not yet include the specific programming sequence needed for clock
scaling.
The driver is designed to support LPDDR4 SDRAM. Devices that use LPDDR4
need to perform training of the RAM before it can be used. Firmware will
perform this training during early boot and pass a table of supported
frequencies to the kernel via device tree.
For the frequencies above 800 MHz, periodic retraining is needed to
compensate for changes in timing. This periodic training will have to be
performed until the frequency drops back to or below 800 MHz.
This driver provides helpers used during this runtime retraining that
will be used by the sequence specific code in a follow-up patch.
Based on work by Peter De Schrijver <pdeschrijver@nvidia.com>.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Replace the symbolic permissions with octals in order to make them
readable.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
[arnd: This is a patch series from Serge Semin to add a few drivers
that don't have any other subsystem maintainer tree to go through,
so I'm picking them up through the soc tree, full series description
from the mailing list below]
Baikal-T1 SoC CPU is based on two MIPS Warrior P5600 cores. Their main
memory Non-Coherent IO interface is connected to the OCP2AXI bridge,
which in turn is then connected to the DW AMBA 3 AXI Interconnect (so
called Main Interconnect) with nine masters and four slaves ports. Main
Interconnect is responsible for the AXI-bus traffic arbitration (QoS)
and its routing from one component to another. In addition there is
a Errors Handler Block (EHB) accesible by means of the Baikal-T1 SoC
System Controller responsible to detect AXI protocol errors and device
not responding situations built on top the interconnect. Baikal-T1 AXI-bus
driver included in this patchset will be responsible for working with that
functionality, though currently it doesn't support QoS tuning. Instead
it's capable of detecting the error events, reporting an info about
them to the system log, injecting artificial errors to test the driver
functionality. Since AXI Interconnect doesn't provide a way to find
out which devices are connected to it, so its DT node is supposed to
be compatible with "simple-bus" driver, while sub-nodes shall represent
the masters attached to the bus.
One of the AXI Interconnect slaves is an AXI-APB bridge used to access the
Baikal-T1 SoC subsystems CSRs. MMIO request from CPU and DMAC masters are
routed there if they are detected to be within [0x08000000 0x1FFFFFFF]
range of the physical memory. In case if an attempted APB transaction
stays with no response for a pre-defined time it will be detected by
the APB-bus Errors Handler Block (EHB), which will raise an interrupt,
then the bus gets freed for a next operation. The APB-bus driver provides
the interrupt handler to detect the erroneous address, update an errors
counter and prints an error message about the faulty address. The counter
and the APB-bus operations timeout can be accessed via corresponding sysfs
nodes. A dedicated sysfs-node can be also used to artificially cause the
bus errors described above. Since APB-bus is a platform bus, it doesn't
provide a way to detect slave devices connected to it, so similarly to
the AXI-bus it's also supposed to be compatible with "simple-bus" driver.
Aside from PCIe/SATA/DDR/I2C/EHB/CPU/reboot specific settings the
Baikal-T1 System Controller provides a MIPS P5600 CM2 L2-cache tuning
block. It is responsible for the setting up the Tag/Data/WS L2-to-RAM
latencies. The last small patch in this patchset provides a driver and
DT-schema-based binding for the described device. So that the latencies
can be tuned up by means of dedicated DT properties and sysfs nodes.
This patchset is rebased and tested on the mainline Linux kernel
5.7-rc4.
Changelog v2 (AXI/APB bus):
- Assign dual GPL/BSD licenses to the bindings.
- Use single lined copyright headers in the bindings.
- Replace "additionalProperties: false" property with
"unevaluatedProperties: false" in the bindings.
- Don't use a multi-arg clock phandle reference in DT binding examples.
Thus remove includes from there.
- Fix some commit message and Kconfig help text spelling.
- Move drivers from soc to the bus subsystem.
- Convert a simple EHB drivers to the Baikal-T1 AXI and APB bus ones.
- Convert APB bus driver to using regmap MMIO API.
- Use syscon regmap to access the AXI-bus erroneous address.
- Add reset line support.
- Add Main Interconnect clock support to the AXI-bus driver.
- Remove probe-status info string printout.
- Discard of_match_ptr() macro utilization.
- Don't print error-message if no platform IRQ found. Just return an
error.
- Use generic FIELD_{GET,PREP} macros instead of handwritten ones in the
AXI-bus driver.
Changelog v2 (l2 driver):
- Fix some commit message and Kconfig help text spelling.
- Move the driver to the memory subsystem.
- Assign dual GPL/BSD license to the DT binding.
- Use single lined copyright header in the binding.
- Discard reg property and syscon compatible string.
- Move "allOf" restrictions to the root level of the properties.
- The DT node is supposed to be a child of the Baikal-T1 system
controller node. So regmap will be fetched from there.
- Use generic FIELD_{GET,PREP} macro.
- Remove probe-status info string printout.
- Since the driver depends on the OF config we can remove of_match_ptr()
macro utilization.
Changelog v3:
- Combine l2 and AXI/APB bus patches in a single patchset.
- Retrieve AXI-bus QoS registers by resource name "qos".
- Discard CONFIG_OF dependency since there is none at compile-time.
- Add syscon EHB registers range to the AXI-bus reg property as optional
entry.
- Fix invalid of_property_read_u32() return value test in the l2-ctl
driver.
- Get the reg property back into the l2-ctl DT bindings even though the
driver is using the parental syscon regmap.
- The l2-ctl DT schema will live separately from the system controller,
but the corresponding sub-node of the later DT schema will $ref this
one.
- Set non-default latencies in the l2-ctl DT example.
* baikal/drivers:
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
Link: https://lore.kernel.org/lkml/20200526130841.ap6qlxv7hqmabnh5@mobilestation/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Baikal-T1 SoC provides a way to tune the MIPS P5600 CM2 L2-cache
performance up. It can be done by changing the L2-RAM Data/Tag/WS
latencies in a dedicated register exposed by the system controller.
The driver added by this commit provides a dts properties-based and
sysfs-based interface for it. The device DT node is supposed to be a
child of Baikal-T1 System Controller node.
Link: https://lore.kernel.org/r/20200526125928.17096-7-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: soc@kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Speed-up a bit this IRQ processing as there is no need to protect
return value or printing.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Acked-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Aligning of tFAW timing with standard was using wrong argument as
minimum acceptable value. This could lead to wrong timing if provided
timings and clock period do not match the standard.
Fixes: 6e7674c3c6 ("memory: Add DMC driver for Exynos5422")
Cc: <stable@vger.kernel.org>
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
These are the usual updates for SoC specific device drivers and related
subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU and
TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=qbsP
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"These are the usual updates for SoC specific device drivers and
related subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
and TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers"
* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
soc: fsl: qe: fix sparse warnings for ucc_slow.c
soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
soc: fsl: qe: fix sparse warnings for ucc_fast.c
soc: fsl: qe: fix sparse warnings for qe_ic.c
soc: fsl: qe: fix sparse warnings for ucc.c
soc: fsl: qe: fix sparse warning for qe_common.c
soc: fsl: qe: fix sparse warnings for qe.c
soc: qcom: Fix QCOM_APR dependencies
soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
firmware: imx: add COMPILE_TEST for IMX_SCU driver
soc: imx: gpc: fix power up sequencing
soc: imx: increase build coverage for imx8m soc driver
soc: qcom: apr: Add avs/audio tracking functionality
dt-bindings: soc: qcom: apr: Add protection domain bindings
soc: qcom: Introduce Protection Domain Restart helpers
devicetree: bindings: firmware: add ipq806x to qcom_scm
memory: tegra: Correct debugfs clk rate-range on Tegra124
memory: tegra: Correct debugfs clk rate-range on Tegra30
memory: tegra: Correct debugfs clk rate-range on Tegra20
...
Correctly set clk rate-range if number of available timings is zero.
This fixes noisy "invalid range [4294967295, 0]" error messages during
boot.
Fixes: 6b9acd9355 ("memory: tegra: Refashion EMC debugfs interface on Tegra124")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Correctly set clk rate-range if number of available timings is zero.
This fixes noisy "invalid range [4294967295, 0]" error messages during
boot.
Fixes: 8cee32b400 ("memory: tegra: Implement EMC debugfs interface on Tegra30")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Correctly set clk rate-range if number of available timings is zero.
This fixes noisy "invalid range [4294967295, 0]" error messages during
boot.
Fixes: 8209eefa3d ("memory: tegra: Implement EMC debugfs interface on Tegra20")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
- Various cleanup on the following drivers:
- Turris Mox rWTM firmware
- Moxtet bus
- Armada 37xx rWTM mailbox
- Marvell EBU Device Bus
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXhn9YQAKCRALBhiOFHI7
1eaRAJ49SHCftal9aCuOrcl2/w4OBmB3awCffwAbLS0fTC/2ynqOshjavVbzmes=
=JM34
-----END PGP SIGNATURE-----
Merge tag 'mvebu-drivers-5.6-1' of git://git.infradead.org/linux-mvebu into arm/drivers
mvebu drivers for 5.6 (part 1)
- Various cleanup on the following drivers:
- Turris Mox rWTM firmware
- Moxtet bus
- Armada 37xx rWTM mailbox
- Marvell EBU Device Bus
* tag 'mvebu-drivers-5.6-1' of git://git.infradead.org/linux-mvebu:
mailbox: armada-37xx-rwtm: convert to devm_platform_ioremap_resource
memory: mvebu-devbus: convert to devm_platform_ioremap_resource
bus: moxtet: declare moxtet_bus_type as static
firmware: turris-mox-rwtm: small white space cleanup
Link: https://lore.kernel.org/r/877e1x3nxc.fsf@FE-laptop
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds a couple of fixes for the Tegra30 EMC frequency scaling code
and adds support for EMC frequency scaling on Tegra186 and later.
-----BEGIN PGP SIGNATURE-----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=shap
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.6-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
memory: tegra: Changes for v5.6-rc1
This adds a couple of fixes for the Tegra30 EMC frequency scaling code
and adds support for EMC frequency scaling on Tegra186 and later.
* tag 'tegra-for-5.6-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra30-emc: Correct error message for timed out auto calibration
memory: tegra30-emc: Firm up hardware programming sequence
memory: tegra30-emc: Firm up suspend/resume sequence
memory: tegra: Correct reset value of xusb_hostr
memory: tegra: Add support for the Tegra194 memory controller
memory: tegra: Only include support for enabled SoCs
memory: tegra: Support DVFS on Tegra186 and later
memory: tegra: Add system sleep support
memory: tegra: Extract memory client SID programming
memory: tegra: Add per-SoC data for Tegra186
memory: tegra: Rename tegra_mc to tegra186_mc on Tegra186
memory: tegra: Implement EMC debugfs interface on Tegra30
memory: tegra: Implement EMC debugfs interface on Tegra20
memory: tegra: Refashion EMC debugfs interface on Tegra124
Link: https://lore.kernel.org/r/20200111003553.2411874-3-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The code waits for auto calibration to be finished and not to be disabled.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Previously there was a problem where a late handshake handling caused
a memory corruption, this problem was resolved by issuing calibration
command right after changing the timing, but looks like the solution
wasn't entirely correct since calibration interval could be disabled as
well. Now programming sequence is completed immediately after receiving
handshake from CaR, without potentially long delays and in accordance to
the TRM's programming guide.
Secondly, the TRM's programming guide suggests to flush EMC writes by
reading any *MC* register before doing CaR changes. This is also addressed
now.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The current code doesn't prevent race conditions of suspend/resume vs CCF.
Let's take exclusive control over the EMC clock during suspend in a way
that is free from race conditions.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
According to Tegra X1 (Tegra210) TRM, the reset value of xusb_hostr
field (bit [7:0]) should be 0x7a. So this patch simply corrects it.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory and external memory controllers on Tegra194 are very similar
to their predecessors from Tegra186. Add the necessary SoC-specific data
to support the newer versions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory client tables can be fairly large and they can easily be
omitted if support for the corresponding SoC is not enabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a Tegra186 (and later) EMC driver that reads the EMC DVFS tables
from BPMP and uses the EMC clock to change the external memory clock.
This currently only provides a debugfs interface to show the available
frequencies and set lower and upper limits of the allowed range. This
can be used for testing the various frequencies. The goal is to
eventually integrate this with the interconnect framework so that the
EMC frequency can be scaled based on demand from memory clients.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add system suspend/resume support for the memory controller found on
Tegra186 and later. This is required so that the SID registers can be
reprogrammed after their content was lost during system sleep.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Move programming of the memory client to SID mapping into a separate
function so that it can be reused from multiple call sites.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Instead of hard-coding the memory client table, use per-SoC data in
preparation for adding support for other SoCs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
A common debugfs interface is already available on Tegra20, Tegra124,
Tegra186 and Tegra194. Implement the same interface on Tegra30 to enable
testing of the EMC frequency scaling code using a unified interface.
Signed-off-by: Thierry Reding <treding@nvidia.com>
A common debugfs interface is already available on Tegra124, Tegra186
and Tegra194. Implement the same interface on Tegra20 to enable testing
of the EMC frequency scaling code using a unified interface.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The current debugfs interface is only partially useful. While it allows
listing supported frequencies and testing individual clock rates, it is
limited in that it can't be used to restrict the range of frequencies
that the driver is allowed to set. This is something we may want to use
to test adaptive scaling once that's implemented.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Fix up inconsistent usage of upper and lowercase letters in "Exynos"
name.
"EXYNOS" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.
The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This contains a fix for a kernel panic that can occur on suspend if EMC
timings are not available in device tree.
-----BEGIN PGP SIGNATURE-----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=zun7
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.5-memory-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
memory: tegra: Fixes for v5.5-rc1
This contains a fix for a kernel panic that can occur on suspend if EMC
timings are not available in device tree.
* tag 'tegra-for-5.5-memory-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra30-emc: Fix panic on suspend
Link: https://lore.kernel.org/r/20191204130753.3614278-1-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo
-----BEGIN PGP SIGNATURE-----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=dk7w
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Olof Johansson:
"Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
soc: fsl: add RCPM driver
dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
memory: tegra: Consolidate registers definition into common header
memory: tegra: Ensure timing control debug features are disabled
memory: tegra: Introduce Tegra30 EMC driver
memory: tegra: Do not handle error from wait_for_completion_timeout()
memory: tegra: Increase handshake timeout on Tegra20
memory: tegra: Print a brief info message about EMC timings
memory: tegra: Pre-configure debug register on Tegra20
memory: tegra: Include io.h instead of iopoll.h
memory: tegra: Adapt for Tegra20 clock driver changes
memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
memory: tegra: Add gr2d and gr3d to DRM IOMMU group
memory: tegra: Set DMA mask based on supported address bits
soc: at91: Add Atmel SFR SN (Serial Number) support
memory: atmel-ebi: switch to SPDX license identifiers
memory: atmel-ebi: move NUM_CS definition inside EBI driver
soc: mediatek: Refactor bus protection control
soc: mediatek: Refactor sram control
...
Trying to suspend driver results in a crash if timings aren't available in
device-tree.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: e34212c75a ("memory: tegra: Introduce Tegra30 EMC driver")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This contains a couple of fixes and adds support for EMC frequency
scaling on Tegra30.
-----BEGIN PGP SIGNATURE-----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=DLzB
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.5-memory-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
memory: tegra: Changes for v5.5-rc1
This contains a couple of fixes and adds support for EMC frequency
scaling on Tegra30.
* tag 'tegra-for-5.5-memory-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Consolidate registers definition into common header
memory: tegra: Ensure timing control debug features are disabled
memory: tegra: Introduce Tegra30 EMC driver
memory: tegra: Do not handle error from wait_for_completion_timeout()
memory: tegra: Increase handshake timeout on Tegra20
memory: tegra: Print a brief info message about EMC timings
memory: tegra: Pre-configure debug register on Tegra20
memory: tegra: Include io.h instead of iopoll.h
memory: tegra: Adapt for Tegra20 clock driver changes
memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
memory: tegra: Add gr2d and gr3d to DRM IOMMU group
memory: tegra: Set DMA mask based on supported address bits
clk: tegra: Add Tegra20/30 EMC clock implementation
Link: https://lore.kernel.org/r/20191111143836.4027200-1-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The Memory Controller registers definition is sparse and duplicated,
let's consolidate everything into a common place for consistency.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Timing control debug features should be disabled at a boot time, but you
never now and hence it's better to disable them explicitly because some of
those features are crucial for the driver to do a proper thing.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Introduce driver for the External Memory Controller (EMC) found on Tegra30
chips, it controls the external DRAM on the board. The purpose of this
driver is to program memory timing for external memory on the EMC clock
rate change.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Contrary to its wait_for_completion_timeout_interruptible() sibling, the
wait_for_completion_timeout() function does not return an error.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Turned out that it could take over a millisecond under some circumstances,
like running on a very low CPU/memory frequency. TRM says that handshake
happens when there is a "safe" moment, but not explains exactly what that
moment is. Apparently at least memory should be idling and thus the low
frequency should be a reasonable cause for a longer handshake delay.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
During boot print how many memory timings got the driver and what's the
RAM code. This is a very useful information when something is wrong with
boards memory timing.
Suggested-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The driver expects certain debug features to be disabled in order to
work properly. Let's disable them explicitly for consistency and to not
rely on a boot state.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The register polling code was gone, but the included header change was
missed. Fix it up for consistency.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Now Tegra20 and Tegra30 EMC drivers should provide clock-rounding
functionality using the new Tegra clock driver API.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory frequency scaling will be managed by tegra20-devfreq driver
and PM QoS once all the prerequisite patches will get upstreamed.
The parent clock is now managed by the clock driver and we also should
assume that PLLM rate can't be changed on some devices (Galaxy Tab 10.1
for example). Altogether there is no point in touching of clock's rate
from the EMC driver.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All of the devices making up the Tegra DRM device want to share a single
IOMMU domain. Put them into a single group to allow them to do that.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory controller on Tegra124 and later supports 34 or more address
bits. Advertise that by setting the DMA mask based on the number of the
address bits.
Signed-off-by: Thierry Reding <treding@nvidia.com>
- a new driver exposing the serial number registers through nvmem
- a few documentation and definition changes
-----BEGIN PGP SIGNATURE-----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=BAax
-----END PGP SIGNATURE-----
Merge tag 'at91-5.5-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/drivers
AT91 drivers for 5.5
- a new driver exposing the serial number registers through nvmem
- a few documentation and definition changes
* tag 'at91-5.5-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
soc: at91: Add Atmel SFR SN (Serial Number) support
memory: atmel-ebi: switch to SPDX license identifiers
memory: atmel-ebi: move NUM_CS definition inside EBI driver
ARM: at91: Documentation: update the sama5d3 and armv7m datasheets
Link: https://lore.kernel.org/r/20191107221644.GA201884@piout.net
Signed-off-by: Olof Johansson <olof@lixom.net>
The total number of EBI CS lines is described by the EBI controller
and not by the Matrix. Move the definition for the number of CS
inside EBI driver.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20190906150632.19039-1-tudor.ambarus@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* 'for_5.5/driver-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
memory: emif: remove set but not used variables 'cs1_used' and 'custom_configs'
soc: ti: omap-prm: fix return value check in omap_prm_probe()
soc: ti: omap-prm: add omap5 PRM data
soc: ti: omap-prm: add am4 PRM data
soc: ti: omap-prm: add dra7 PRM data
soc: ti: omap-prm: add data for am33xx
soc: ti: omap-prm: add omap4 PRM data
soc: ti: omap-prm: add support for denying idle for reset clockdomain
soc: ti: omap-prm: poll for reset complete during de-assert
soc: ti: add initial PRM driver with reset control support
dt-bindings: omap: add new binding for PRM instances
Link: https://lore.kernel.org/r/1572372856-20598-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Olof Johansson <olof@lixom.net>
drivers/memory/emif.c:1616:9: warning:
variable cs1_used set but not used [-Wunused-but-set-variable]
drivers/memory/emif.c:1624:36: warning:
variable custom_configs set but not used [-Wunused-but-set-variable]
They are never used since introduction.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
updates for 5.5, please pull the following:
- Markus updates the DPFE driver so as to support deferring the firmware
loading process until the first sysfs attribute is accessed, in the
process he does a bunch of cleanups and minor fixes
- Florian adds support for the DPFE on 7211 which uses a "new style" API
v2 and makes necessary changes along the way
-----BEGIN PGP SIGNATURE-----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=rU3w
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.5/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64/MIPS based SoCs drivers
updates for 5.5, please pull the following:
- Markus updates the DPFE driver so as to support deferring the firmware
loading process until the first sysfs attribute is accessed, in the
process he does a bunch of cleanups and minor fixes
- Florian adds support for the DPFE on 7211 which uses a "new style" API
v2 and makes necessary changes along the way
* tag 'arm-soc/for-5.5/drivers' of https://github.com/Broadcom/stblinux:
memory: brcmstb: dpfe: Fixup API version/commands for 7211
memory: brcmstb: dpfe: Compute checksum at __send_command() time
memory: brcmstb: dpfe: support for deferred firmware download
memory: brcmstb: dpfe: pass *priv as argument to brcmstb_dpfe_download_firmware()
memory: brcmstb: dpfe: move init_data into brcmstb_dpfe_download_firmware()
memory: brcmstb: dpfe: add locking around DCPU enable/disable
memory: brcmstb: dpfe: initialize priv->dev
memory: brcmstb: dpfe: rename struct private_data
Link: https://lore.kernel.org/r/20191023212814.30622-2-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
7211 uses a newer version of API v2 which is half way between what was
defined as API v3 and what used to be called API v2 but was used with
DPFE firmwares with major versions 1.x.x.x. Starting with **the new**
API v2, we are no longer getting loadable firmware images, so the
capability to load it is removed (like v3).
To avoid spreading more confusion, map 7268/7271/7278 to the old DPFE
API version 2, 7211 to the new API v2 and introduce the specific
commands for that, and leave newer versions to map to API v3.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Instead of pre-computing the checksum, do it at the time we send the
command, this reduces the possibility of introducing errors as well as
limits the amount of code necessary while adding new commands and/or new
API versions. The MSG_CHKSUM enumeration value is no longer necessary
and is removed.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
We add support for deferred downloading of the DPFE firmware. It may be
necessary to do this if the root file system containing the firmware
image is not yet available at the time the driver's probe function is
being called.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Rather than passing a (struct platform_device *) to
brcmstb_dpfe_download_firmware(), we pass a (struct private_data *).
This is the more sensible thing to do.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
