This test measures the performance effects of KVM's access tracking.
Access tracking is driven by the MMU notifiers test_young, clear_young,
and clear_flush_young. These notifiers do not have a direct userspace
API, however the clear_young notifier can be triggered by marking a
pages as idle in /sys/kernel/mm/page_idle/bitmap. This test leverages
that mechanism to enable access tracking on guest memory.
To measure performance this test runs a VM with a configurable number of
vCPUs that each touch every page in disjoint regions of memory.
Performance is measured in the time it takes all vCPUs to finish
touching their predefined region.
Example invocation:
$ ./access_tracking_perf_test -v 8
Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages
guest physical test memory offset: 0xffdfffff000
Populating memory : 1.337752570s
Writing to populated memory : 0.010177640s
Reading from populated memory : 0.009548239s
Mark memory idle : 23.973131748s
Writing to idle memory : 0.063584496s
Mark memory idle : 24.924652964s
Reading from idle memory : 0.062042814s
Breaking down the results:
* "Populating memory": The time it takes for all vCPUs to perform the
first write to every page in their region.
* "Writing to populated memory" / "Reading from populated memory": The
time it takes for all vCPUs to write and read to every page in their
region after it has been populated. This serves as a control for the
later results.
* "Mark memory idle": The time it takes for every vCPU to mark every
page in their region as idle through page_idle.
* "Writing to idle memory" / "Reading from idle memory": The time it
takes for all vCPUs to write and read to every page in their region
after it has been marked idle.
This test should be portable across architectures but it is only enabled
for x86_64 since that's all I have tested.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210713220957.3493520-7-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is a missing break statement which causes a fallthrough to the
next statement where optarg will be null and a segmentation fault will
be generated.
Fixes: 9e965bb75a ("KVM: selftests: Add backing src parameter to dirty_log_perf_test")
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210713220957.3493520-6-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix MTE shared page detection
- Fix selftest use of obsolete pthread_yield() in favour of sched_yield()
- Enable selftest's use of PMU registers when asked to
-----BEGIN PGP SIGNATURE-----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=Ln0f
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.14, take #1
- Fix MTE shared page detection
- Fix selftest use of obsolete pthread_yield() in favour of sched_yield()
- Enable selftest's use of PMU registers when asked to
Two additional tests are added:
- SMM triggered from L2 does not currupt L1 host state.
- Save/restore during SMM triggered from L2 does not corrupt guest/host
state.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210628104425.391276-7-vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit a75a895e64 ("KVM: selftests: Unconditionally use memslot 0 for
vaddr allocations") removed the memslot parameters from vm_vaddr_alloc.
It addressed all callers except one under lib/aarch64/, due to a race
with commit e3db7579ef ("KVM: selftests: Add exception handling
support for aarch64")
Fix the vm_vaddr_alloc call in lib/aarch64/processor.c.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Message-Id: <20210702201042.4036162-1-ricarkol@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit b78f4a5966 ("KVM: selftests: Rename vm_handle_exception")
raced with a couple of new x86 tests, missing two vm_handle_exception
to vm_install_exception_handler conversions.
Help the two broken tests to catch up with the new world.
Cc: Andrew Jones <drjones@redhat.com>
CC: Ricardo Koller <ricarkol@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20210701071928.2971053-1-maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We reworked get-reg-list to make it easier to enable optional register
sublists by parametrizing their vcpu feature flags as well as making
other generalizations. That was all to make sure we enable the PMU
registers when we want to test them. Somehow we forgot to actually
include the PMU feature flag in the PMU sublist description though!
Do that now.
Fixes: 313673bad8 ("KVM: arm64: selftests: get-reg-list: Split base and pmu registers")
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210713203742.29680-3-drjones@redhat.com
With later GCC we get
steal_time.c: In function ‘main’:
steal_time.c:323:25: warning: ‘pthread_yield’ is deprecated: pthread_yield is deprecated, use sched_yield instead [-Wdeprecated-declarations]
Let's follow the instructions and use sched_yield instead.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210713203742.29680-2-drjones@redhat.com
Unless the user sets overcommit_memory or has plenty of swap, the latest
changes to the testcase will result in ENOMEM failures for hosts with
less than 64GB RAM. As we do not use much of the allocated memory, we
can use MAP_NORESERVE to avoid this error.
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: vkuznets@redhat.com
Cc: wanghaibin.wang@huawei.com
Cc: stable@vger.kernel.org
Fixes: 309505dd56 ("KVM: selftests: Fix mapping length truncation in m{,un}map()")
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/kvm/20210701160425.33666-1-borntraeger@de.ibm.com/
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Older machines like z196 and zEC12 do only support 44 bits of physical
addresses. Make this the default and check via IBC if we are on a later
machine. We then add P47V64 as an additional model.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/kvm/20210701153853.33063-1-borntraeger@de.ibm.com/
Fixes: 1bc603af73 ("KVM: selftests: introduce P47V64 for s390x")
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
PPC:
- Support for the H_RPT_INVALIDATE hypercall
- Conversion of Book3S entry/exit to C
- Bug fixes
S390:
- new HW facilities for guests
- make inline assembly more robust with KASAN and co
x86:
- Allow userspace to handle emulation errors (unknown instructions)
- Lazy allocation of the rmap (host physical -> guest physical address)
- Support for virtualizing TSC scaling on VMX machines
- Optimizations to avoid shattering huge pages at the beginning of live migration
- Support for initializing the PDPTRs without loading them from memory
- Many TLB flushing cleanups
- Refuse to load if two-stage paging is available but NX is not (this has
been a requirement in practice for over a year)
- A large series that separates the MMU mode (WP/SMAP/SMEP etc.) from
CR0/CR4/EFER, using the MMU mode everywhere once it is computed
from the CPU registers
- Use PM notifier to notify the guest about host suspend or hibernate
- Support for passing arguments to Hyper-V hypercalls using XMM registers
- Support for Hyper-V TLB flush hypercalls and enlightened MSR bitmap on
AMD processors
- Hide Hyper-V hypercalls that are not included in the guest CPUID
- Fixes for live migration of virtual machines that use the Hyper-V
"enlightened VMCS" optimization of nested virtualization
- Bugfixes (not many)
Generic:
- Support for retrieving statistics without debugfs
- Cleanups for the KVM selftests API
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDV9UYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOIRgf/XX8fKLh24RnTOs2ldIu2AfRGVrT4
QMrr8MxhmtukBAszk2xKvBt8/6gkUjdaIC3xqEnVjxaDaUvZaEtP7CQlF5JV45rn
iv1zyxUKucXrnIOr+gCioIT7qBlh207zV35ArKioP9Y83cWx9uAs22pfr6g+7RxO
h8bJZlJbSG6IGr3voANCIb9UyjU1V/l8iEHqRwhmr/A5rARPfD7g8lfMEQeGkzX6
+/UydX2fumB3tl8e2iMQj6vLVdSOsCkehvpHK+Z33EpkKhan7GwZ2sZ05WmXV/nY
QLAYfD10KegoNWl5Ay4GTp4hEAIYVrRJCLC+wnLdc0U8udbfCuTC31LK4w==
=NcRh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This covers all architectures (except MIPS) so I don't expect any
other feature pull requests this merge window.
ARM:
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration and
apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
PPC:
- Support for the H_RPT_INVALIDATE hypercall
- Conversion of Book3S entry/exit to C
- Bug fixes
S390:
- new HW facilities for guests
- make inline assembly more robust with KASAN and co
x86:
- Allow userspace to handle emulation errors (unknown instructions)
- Lazy allocation of the rmap (host physical -> guest physical
address)
- Support for virtualizing TSC scaling on VMX machines
- Optimizations to avoid shattering huge pages at the beginning of
live migration
- Support for initializing the PDPTRs without loading them from
memory
- Many TLB flushing cleanups
- Refuse to load if two-stage paging is available but NX is not (this
has been a requirement in practice for over a year)
- A large series that separates the MMU mode (WP/SMAP/SMEP etc.) from
CR0/CR4/EFER, using the MMU mode everywhere once it is computed
from the CPU registers
- Use PM notifier to notify the guest about host suspend or hibernate
- Support for passing arguments to Hyper-V hypercalls using XMM
registers
- Support for Hyper-V TLB flush hypercalls and enlightened MSR bitmap
on AMD processors
- Hide Hyper-V hypercalls that are not included in the guest CPUID
- Fixes for live migration of virtual machines that use the Hyper-V
"enlightened VMCS" optimization of nested virtualization
- Bugfixes (not many)
Generic:
- Support for retrieving statistics without debugfs
- Cleanups for the KVM selftests API"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (314 commits)
KVM: x86: rename apic_access_page_done to apic_access_memslot_enabled
kvm: x86: disable the narrow guest module parameter on unload
selftests: kvm: Allows userspace to handle emulation errors.
kvm: x86: Allow userspace to handle emulation errors
KVM: x86/mmu: Let guest use GBPAGES if supported in hardware and TDP is on
KVM: x86/mmu: Get CR4.SMEP from MMU, not vCPU, in shadow page fault
KVM: x86/mmu: Get CR0.WP from MMU, not vCPU, in shadow page fault
KVM: x86/mmu: Drop redundant rsvd bits reset for nested NPT
KVM: x86/mmu: Optimize and clean up so called "last nonleaf level" logic
KVM: x86: Enhance comments for MMU roles and nested transition trickiness
KVM: x86/mmu: WARN on any reserved SPTE value when making a valid SPTE
KVM: x86/mmu: Add helpers to do full reserved SPTE checks w/ generic MMU
KVM: x86/mmu: Use MMU's role to determine PTTYPE
KVM: x86/mmu: Collapse 32-bit PAE and 64-bit statements for helpers
KVM: x86/mmu: Add a helper to calculate root from role_regs
KVM: x86/mmu: Add helper to update paging metadata
KVM: x86/mmu: Don't update nested guest's paging bitmasks if CR0.PG=0
KVM: x86/mmu: Consolidate reset_rsvds_bits_mask() calls
KVM: x86/mmu: Use MMU role_regs to get LA57, and drop vCPU LA57 helper
KVM: x86/mmu: Get nested MMU's root level from the MMU's role
...
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
-----BEGIN PGP SIGNATURE-----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=fWBV
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for v5.14.
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
This test exercises the feature KVM_CAP_EXIT_ON_EMULATION_FAILURE. When
enabled, errors in the in-kernel instruction emulator are forwarded to
userspace with the instruction bytes stored in the exit struct for
KVM_EXIT_INTERNAL_ERROR. So, when the guest attempts to emulate an
'flds' instruction, which isn't able to be emulated in KVM, instead
of failing, KVM sends the instruction to userspace to handle.
For this test to work properly the module parameter
'allow_smaller_maxphyaddr' has to be set.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210510144834.658457-3-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an x86-only test to verify that x86's MMU reacts to CPUID updates
that impact the MMU. KVM has had multiple bugs where it fails to
reconfigure the MMU after the guest's vCPU model changes.
Sadly, this test is effectively limited to shadow paging because the
hardware page walk handler doesn't support software disabling of GBPAGES
support, and KVM doesn't manually walk the GVA->GPA on faults for
performance reasons (doing so would large defeat the benefits of TDP).
Don't require !TDP for the tests as there is still value in running the
tests with TDP, even though the tests will fail (barring KVM hacks).
E.g. KVM should not completely explode if MAXPHYADDR results in KVM using
4-level vs. 5-level paging for the guest.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-20-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add x86-64 hugepage support in the form of a x86-only variant of
virt_pg_map() that takes an explicit page size. To keep things simple,
follow the existing logic for 4k pages and disallow creating a hugepage
if the upper-level entry is present, even if the desired pfn matches.
Opportunistically fix a double "beyond beyond" reported by checkpatch.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for adding hugepage support, replace "pageMapL4Entry",
"pageDirectoryPointerEntry", and "pageDirectoryEntry" with a common
"pageUpperEntry", and add a helper to create an upper level entry. All
upper level entries have the same layout, using unique structs provides
minimal value and requires a non-trivial amount of code duplication.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-18-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper to retrieve a PTE pointer given a PFN, address, and level
in preparation for adding hugepage support.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the "address" field to "pfn" in x86's page table structs to match
reality.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper to allocate a page for use in constructing the guest's page
tables. All architectures have identical address and memslot
requirements (which appear to be arbitrary anyways).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the EPTP memslot param from all EPT helpers and shove the hardcoded
'0' down to the vm_phy_page_alloc() calls.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the memslot param from virt_pg_map() and virt_map() and shove the
hardcoded '0' down to the vm_phy_page_alloc() calls.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the memslot param(s) from vm_vaddr_alloc() now that all callers
directly specific '0' as the memslot. Drop the memslot param from
virt_pgd_alloc() as well since vm_vaddr_alloc() is its only user.
I.e. shove the hardcoded '0' down to the vm_phy_pages_alloc() calls.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use KVM_UTIL_MIN_ADDR as the minimum for x86-64's CPUID array. The
system page size was likely used as the minimum because _something_ had
to be provided. Increasing the min from 0x1000 to 0x2000 should have no
meaningful impact on the test, and will allow changing vm_vaddr_alloc()
to use KVM_UTIL_MIN_VADDR as the default.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the common page allocation helper for the xAPIC IPI test, effectively
raising the minimum virtual address from 0x1000 to 0x2000. Presumably
the test won't explode if it can't get a page at address 0x1000...
Cc: Peter Shier <pshier@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Switch to the vm_vaddr_alloc_page() helper for x86-64's "kernel"
allocations now that the helper uses the same min virtual address as the
open coded versions.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reduce the minimum virtual address of page allocations from 0x10000 to
KVM_UTIL_MIN_VADDR (0x2000). Both values appear to be completely
arbitrary, and reducing the min to KVM_UTIL_MIN_VADDR will allow for
additional consolidation of code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add wrappers to allocate 1 and N pages of memory using de facto standard
values as the defaults for minimum virtual address, data memslot, and
page table memslot. Convert all compatible users.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the de facto standard minimum virtual address for Hyper-V's hcall
params page. It's the allocator's job to not double-allocate memory,
i.e. there's no reason to force different regions for the params vs.
hcall page. This will allow adding a page allocation helper with a
"standard" minimum address.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor x86's GDT/TSS allocations to for memslot '0' at its
vm_addr_alloc() call sites instead of passing in '0' from on high. This
is a step toward using a common helper for allocating pages.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use memslot '0' for all vm_vaddr_alloc() calls when loading the test
binary. This is the first step toward adding a helper to handle page
allocations with a default value for the target memslot.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix an apparent copy-paste goof in hyperv_features where hcall_page
(which is two pages, so technically just the first page) gets zeroed
twice, and hcall_params gets zeroed none times.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop an unnecessary include of asm/barrier.h from dirty_log_test.c to
allow the test to build on arm64. arm64, s390, and x86 all build cleanly
without the include (PPC and MIPS aren't supported in KVM's selftests).
arm64's barrier.h includes linux/kasan-checks.h, which is not copied
into tools/.
In file included from ../../../../tools/include/asm/barrier.h:8,
from dirty_log_test.c:19:
.../arm64/include/asm/barrier.h:12:10: fatal error: linux/kasan-checks.h: No such file or directory
12 | #include <linux/kasan-checks.h>
| ^~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Fixes: 84292e5659 ("KVM: selftests: Add dirty ring buffer test")
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 22f232d134 ("KVM: selftests: x86: Set supported CPUIDs on
default VM") moved vcpu_set_cpuid into vm_create_with_vcpus, but
dirty_log_test doesn't use it to create vm. So vcpu's CPUIDs is
not set, the guest's pa_bits in kvm would be smaller than the
value queried by userspace.
However, the dirty track memory slot is in the highest GPA, the
reserved bits in gpte would be set with wrong pa_bits.
For shadow paging, page fault would fail in permission_fault and
be injected into guest. Since guest doesn't have idt, it finally
leads to vm_exit for triple fault.
Move vcpu_set_cpuid into vm_vcpu_add_default to set supported
CPUIDs on default vcpu, since almost all tests need it.
Fixes: 22f232d134 ("KVM: selftests: x86: Set supported CPUIDs on default VM")
Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com>
Message-Id: <411ea2173f89abce56fc1fca5af913ed9c5a89c9.1624351343.git.houwenlong93@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
max_mem_slots is now declared as uint32_t. The result of (0x200000 * 32767)
is unexpectedly truncated to be 0xffe00000, whilst we actually need to
allocate about, 63GB. Cast max_mem_slots to size_t in both mmap() and
munmap() to fix the length truncation.
We'll otherwise see the failure on arm64 thanks to the access_ok() checking
in __kvm_set_memory_region(), as the unmapped VA happen to go beyond the
task's allowed address space.
# ./set_memory_region_test
Allowed number of memory slots: 32767
Adding slots 0..32766, each memory region with 2048K size
==== Test Assertion Failure ====
set_memory_region_test.c:391: ret == 0
pid=94861 tid=94861 errno=22 - Invalid argument
1 0x00000000004015a7: test_add_max_memory_regions at set_memory_region_test.c:389
2 (inlined by) main at set_memory_region_test.c:426
3 0x0000ffffb8e67bdf: ?? ??:0
4 0x00000000004016db: _start at :?
KVM_SET_USER_MEMORY_REGION IOCTL failed,
rc: -1 errno: 22 slot: 2615
Fixes: 3bf0fcd754 ("KVM: selftests: Speed up set_memory_region_test")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20210624070931.565-1-yuzenghui@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Selftest updates from Andrew Jones, fixing the sysgreg list
expectations by dealing with multiple configurations, such
as with or without a PMU.
* kvm-arm64/selftest/sysreg-list-fix:
KVM: arm64: Update MAINTAINERS to include selftests
KVM: arm64: selftests: get-reg-list: Split base and pmu registers
KVM: arm64: selftests: get-reg-list: Remove get-reg-list-sve
KVM: arm64: selftests: get-reg-list: Provide config selection option
KVM: arm64: selftests: get-reg-list: Prepare to run multiple configs at once
KVM: arm64: selftests: get-reg-list: Introduce vcpu configs
Since KVM commit 11663111cd ("KVM: arm64: Hide PMU registers from
userspace when not available") the get-reg-list* tests have been
failing with
...
... There are 74 missing registers.
The following lines are missing registers:
...
where the 74 missing registers are all PMU registers. This isn't a
bug in KVM that the selftest found, even though it's true that a
KVM userspace that wasn't setting the KVM_ARM_VCPU_PMU_V3 VCPU
flag, but still expecting the PMU registers to be in the reg-list,
would suddenly no longer have their expectations met. In that case,
the expectations were wrong, though, so that KVM userspace needs to
be fixed, and so does this selftest. The fix for this selftest is to
pull the PMU registers out of the base register sublist into their
own sublist and then create new, pmu-enabled vcpu configs which can
be tested.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210531103344.29325-6-drjones@redhat.com
Now that we can easily run the test for multiple vcpu configs, let's
merge get-reg-list and get-reg-list-sve into just get-reg-list. We
also add a final change to make it more possible to run multiple
tests, which is to fork the test, rather than directly run it. That
allows a test to fail, but subsequent tests can still run.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210531103344.29325-5-drjones@redhat.com
Add a new command line option that allows the user to select a specific
configuration, e.g. --config=sve will give the sve config. Also provide
help text and the --help/-h options.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210531103344.29325-4-drjones@redhat.com
We don't want to have to create a new binary for each vcpu config, so
prepare to run the test for multiple vcpu configs in a single binary.
We do this by factoring out the test from main() and then looping over
configs. When given '--list' we still never print more than a single
reg-list for a single vcpu config though, because it would be confusing
otherwise.
No functional change intended.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210531103344.29325-3-drjones@redhat.com
We already break register lists into sublists that get selected based
on vcpu config. However, since we only had two configs (vregs and sve),
we didn't structure the code very well to manage them. Restructure it
now to more cleanly handle register sublists that are dependent on the
vcpu config.
This patch has no intended functional change (except for the vcpu
config name now being prepended to all output).
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210531103344.29325-2-drjones@redhat.com
Do KVM_GET_NESTED_STATE/KVM_SET_NESTED_STATE for a freshly restored VM
(before the first KVM_RUN) to check that KVM_STATE_NESTED_EVMCS is not
lost.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210526132026.270394-12-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The initial implementation of the test only tests that access to Hyper-V
MSRs and hypercalls is in compliance with guest visible CPUID feature bits.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-31-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
evmcs.h is x86_64 only thing, move it to x86_64/ subdirectory.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-30-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These defines can be shared by multiple tests, move them to a dedicated
header.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210521095204.2161214-29-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Standardize reads and writes of the x2APIC MSRs.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20210604172611.281819-11-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the APIC functions into the library to encourage code reuse and
to avoid unintended deviations.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20210604172611.281819-10-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Processor.h is a hodgepodge of definitions. Though the local APIC is
technically built into the CPU these days, move the APIC definitions
into a new header file: apic.h.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20210604172611.281819-9-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Test that nested TSC scaling works as expected with both L1 and L2
scaled.
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-12-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
