The logical block size need to be smaller than the max_hw_sector
setting, otherwise we can't even transfer a single LBA.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The max_user_sectors is one of the three factors determining the actual
max_sectors limit for READ/WRITE requests. Because of that it needs to
be stacked at least for the device mapper multi-path case where requests
are directly inserted on the lower device. For SCSI disks this is
important because the sd driver actually sets it's own advisory limit
that is lower than max_hw_sectors based on the block limits VPD page.
While this is a bit odd an unusual, the same effect can happen if a
user or udev script tweaks the value manually.
Fixes: 4f563a6473 ("block: add a max_user_discard_sectors queue limit")
Reported-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240523182618.602003-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers. The remaining patches are assorted minor fixes and
deprecated function updates plus a bit of constification.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZkOnWyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYe7AP93XRN/
xnccJbSTTUL4FFGobq2CYXv58Na+FM/b/+/kEAD+PNi0LmHDdDTOaFUblMd9l4lj
mpvYLRvJ6ifnHX6WXAg=
=PVnL
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers.
The remaining patches are assorted minor fixes and deprecated function
updates plus a bit of constification"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: mpi3mr: Sanitise num_phys
scsi: lpfc: Copyright updates for 14.4.0.2 patches
scsi: lpfc: Update lpfc version to 14.4.0.2
scsi: lpfc: Add support for 32 byte CDBs
scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
scsi: lpfc: Update logging of protection type for T10 DIF I/O
scsi: lpfc: Change default logging level for unsolicited CT MIB commands
scsi: target: Remove unused list 'device_list'
scsi: iscsi: Remove unused list 'connlist_err'
scsi: ufs: exynos: Add support for Tensor gs101 SoC
scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
scsi: ufs: exynos: Allow max frequencies up to 267Mhz
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
scsi: ufs: dt-bindings: exynos: Add gs101 compatible
scsi: qla2xxx: Fix debugfs output for fw_resource_count
scsi: qedf: Ensure the copied buf is NUL terminated
scsi: bfa: Ensure the copied buf is NUL terminated
...
-----BEGIN PGP SIGNATURE-----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=HnjE
-----END PGP SIGNATURE-----
Merge tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- Add a partscan attribute in sysfs, fixing an issue with systemd
relying on an internal interface that went away.
- Attempt #2 at making long running discards interruptible. The
previous attempt went into 6.9, but we ended up mostly reverting it
as it had issues.
- Remove old ida_simple API in bcache
- Support for zoned write plugging, greatly improving the performance
on zoned devices.
- Remove the old throttle low interface, which has been experimental
since 2017 and never made it beyond that and isn't being used.
- Remove page->index debugging checks in brd, as it hasn't caught
anything and prepares us for removing in struct page.
- MD pull request from Song
- Don't schedule block workers on isolated CPUs
* tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux: (84 commits)
blk-throttle: delay initialization until configuration
blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW
block: fix that util can be greater than 100%
block: support to account io_ticks precisely
block: add plug while submitting IO
bcache: fix variable length array abuse in btree_iter
bcache: Remove usage of the deprecated ida_simple_xx() API
md: Revert "md: Fix overflow in is_mddev_idle"
blk-lib: check for kill signal in ioctl BLKDISCARD
block: add a bio_await_chain helper
block: add a blk_alloc_discard_bio helper
block: add a bio_chain_and_submit helper
block: move discard checks into the ioctl handler
block: remove the discard_granularity check in __blkdev_issue_discard
block/ioctl: prefer different overflow check
null_blk: Fix the WARNING: modpost: missing MODULE_DESCRIPTION()
block: fix and simplify blkdevparts= cmdline parsing
block: refine the EOF check in blkdev_iomap_begin
block: add a partscan sysfs attribute for disks
block: add a disk_has_partscan helper
...
For devices with virt_boundary limit, the driver may provide zero max
segment size, we have to set it as UINT_MAX at default. Otherwise, it
may cause warning in driver when handling sglist.
Fix it by setting default max segment size as UINT_MAX.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@kernel.org>
Fixes: b561ea56a2 ("block: allow device to have both virt_boundary_mask and max segment size")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/linux-block/7e38b67c-9372-a42d-41eb-abdce33d3372@linux-m68k.org/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240424134722.2584284-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only elevator feature ever implemented is ELEVATOR_F_ZBD_SEQ_WRITE
for signaling that a scheduler implements zone write locking to tightly
control the dispatching order of write operations to zoned block
devices. With the removal of zone write locking support in mq-deadline
and the reliance of all block device drivers on the block layer zone
write plugging to control ordering of write operations to zones, the
elevator feature ELEVATOR_F_ZBD_SEQ_WRITE is completely unused.
Remove it, and also remove the now unused code for filtering the
possible schedulers for a block device based on required features.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-23-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for adding a generic zone append emulation using zone
write plugging, allow device drivers supporting zoned block device to
set a the max_zone_append_sectors queue limit of a device to 0 to
indicate the lack of native support for zone append operations and that
the block layer should emulate these operations using regular write
operations.
blk_queue_max_zone_append_sectors() is modified to allow passing 0 as
the max_zone_append_sectors argument. The function
queue_max_zone_append_sectors() is also modified to ensure that the
minimum of the max_hw_sectors and chunk_sectors limit is used whenever
the max_zone_append_sectors limit is 0. This minimum is consistent with
the value set for the max_zone_append_sectors limit by the function
blk_validate_zoned_limits() when limits for a queue are validated.
The helper functions queue_emulates_zone_append() and
bdev_emulates_zone_append() are added to test if a queue (or block
device) emulates zone append operations.
In order for blk_revalidate_disk_zones() to accept zoned block devices
relying on zone append emulation, the direct check to the
max_zone_append_sectors queue limit of the disk is replaced by a check
using the value returned by queue_max_zone_append_sectors(). Similarly,
queue_zone_append_max_show() is modified to use the same accessor so
that the sysfs attribute advertizes the non-zero limit that will be
used, regardless if it is for native or emulated commands.
For stacking drivers, a top device should not need to care if the
underlying devices have native or emulated zone append operations.
blk_stack_limits() is thus modified to set the top device
max_zone_append_sectors limit using the new accessor
queue_limits_max_zone_append_sectors(). queue_max_zone_append_sectors()
is modified to use this function as well. Stacking drivers that require
zone append emulation, e.g. dm-crypt, can still request this feature by
calling blk_queue_max_zone_append_sectors() with a 0 limit.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-10-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-24-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We already cap down the actual max_sectors to the max of the hardware
and user limit, so don't reject the configuration.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240326060745.2349154-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 8e0ef41286.
It's broken, and causes the boot to fail on encrypted volumes.
Reported-and-bisected-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/all/20240311235023.GA1205@cmpxchg.org/
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
disk_stack_limits is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-12-hch@lst.de
Use queue_limits_set which validates the limits and takes care of
updating the readahead settings instead of directly assigning them to
the queue. For that make sure all limits are actually updated before
the assignment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20240228225653.947152-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a small wrapper around blk_stack_limits that allows passing a bdev
for the bottom device and prints an error in case of misaligned
device. The name fits into the new queue limits API and the intent is
to eventually replace disk_stack_limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240228225653.947152-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a small wrapper around queue_limits_commit_update for stacking
drivers that don't want to update existing limits, but set an
entirely new set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240228225653.947152-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Device mapper may create a non-zoned mapped device out of a zoned device
(e.g., the dm-zoned target). In such case, some queue limit such as the
max_zone_append_sectors and zone_write_granularity endup being non zero
values for a block device that is not zoned. Avoid this by clearing
these limits in blk_stack_limits() when the stacked zoned limit is
false.
Fixes: 3093a47972 ("block: inherit the zoned characteristics in blk_stack_limits")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240222131724.1803520-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't set the default max_segment_size value when a virt_boundary is
used.
Fixes: d690cb8ae1 ("block: add an API to atomically update queue limits")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240221125010.3609444-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new max_user_discard_sectors limit that mirrors max_user_sectors
and stores the value that the user manually set. This now allows
updates of the max_hw_discard_sectors to not worry about the user
limit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new queue_limits_{start,commit}_update pair of functions that
allows taking an atomic snapshot of queue limits, update it, and
commit it if it passes validity checking. Also use the low-level
validation helper to implement blk_set_default_limits instead of
duplicating the initialization.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_set_stacking_limits uses very little from blk_set_default_limits.
Open code these initializations in preparation for rewriting
blk_set_default_limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out a blk_apply_bdi_limits limits helper that can be used with
an explicit queue_limits argument, which will be useful later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Discarding less than a physical block doesn't make sense. This fixes
the existing behavior for zram before the recent changes to default
the discard granularity to the logical block size, and is also a
generally useful sanity check.
Fixes: 3753039def ("zram: use the default discard granularity")
Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240103081622.508754-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current the discard granularity defaults to 0 and must be initialized by
any driver that wants to support discard. Default to the sector size
instead, which is the smallest possible value, and a very useful default.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231228075545.362768-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the queue wide write back cache tracking insted of duplicating the
value in strut rq_wb.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231226090747.204969-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only use disk_set_zoned to actually enable zoned device support.
For clearing it, call disk_clear_zoned, which is renamed from
disk_clear_zone_settings and now directly clears the zoned flag as
well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231217165359.604246-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When zones were first added the SCSI and ATA specs, two different
models were supported (in addition to the drive managed one that
is invisible to the host):
- host managed where non-conventional zones there is strict requirement
to write at the write pointer, or else an error is returned
- host aware where a write point is maintained if writes always happen
at it, otherwise it is left in an under-defined state and the
sequential write preferred zones behave like conventional zones
(probably very badly performing ones, though)
Not surprisingly this lukewarm model didn't prove to be very useful and
was finally removed from the ZBC and SBC specs (NVMe never implemented
it). Due to to the easily disappearing write pointer host software
could never rely on the write pointer to actually be useful for say
recovery.
Fortunately only a few HDD prototypes shipped using this model which
never made it to mass production. Drop the support before it is too
late. Note that any such host aware prototype HDD can still be used
with Linux as we'll now treat it as a conventional HDD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231217165359.604246-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch to the modern style of printing kernel messages. Use %u instead
of %d to print unsigned integers.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20231213194702.90381-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently the write_cache attribute allows enabling the QUEUE_FLAG_WC
flag on devices that never claimed the capability.
Fix that by adding a QUEUE_FLAG_HW_WC flag that is set by
blk_queue_write_cache and guards re-enabling the cache through sysfs.
Note that any rescan that calls blk_queue_write_cache will still
re-enable the write cache as in the current code.
Fixes: 93e9d8e836 ("block: add ability to flag write back caching on a device")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230707094239.107968-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The scsi driver function sd_read_block_characteristics() always calls
disk_set_zoned() to a disk zoned model correctly, in case the device
model changed. This is done even for regular disks to set the zoned
model to BLK_ZONED_NONE and free any zone related resources if the drive
previously was zoned.
This behavior significantly impact the time it takes to revalidate disks
on a large system as the call to disk_clear_zone_settings() done from
disk_set_zoned() for the BLK_ZONED_NONE case results in the device
request queued to be frozen, even if there are no zone resources to
free.
Avoid this overhead for non-zoned devices by not calling
disk_clear_zone_settings() in disk_set_zoned() if the device model
was already set to BLK_ZONED_NONE, which is always the case for regular
devices.
Reported by: Brian Bunker <brian@purestorage.com>
Fixes: 508aebb805 ("block: introduce blk_queue_clear_zone_settings()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230529073237.1339862-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A large part of blk-wbt.h is only used in blk-wbt.c, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The user can set the max_sectors limit to any valid value via sysfs
/sys/block/<dev>/queue/max_sectors_kb attribute. If the device limits
are ever rescanned, though, the limit reverts back to the potentially
artificially low BLK_DEF_MAX_SECTORS value.
Preserve the user's setting as the max_sectors limit as long as it's
valid. The user can reset back to defaults by writing 0 to the sysfs
file.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230105205146.3610282-3-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is used as an unsigned value, so define it that way to avoid
having to cast it.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230105205146.3610282-2-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=k/vv
-----END PGP SIGNATURE-----
Merge tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- Support some passthrough commands without CAP_SYS_ADMIN (Kanchan
Joshi)
- Refactor PCIe probing and reset (Christoph Hellwig)
- Various fabrics authentication fixes and improvements (Sagi
Grimberg)
- Avoid fallback to sequential scan due to transient issues (Uday
Shankar)
- Implement support for the DEAC bit in Write Zeroes (Christoph
Hellwig)
- Allow overriding the IEEE OUI and firmware revision in configfs
for nvmet (Aleksandr Miloserdov)
- Force reconnect when number of queue changes in nvmet (Daniel
Wagner)
- Minor fixes and improvements (Uros Bizjak, Joel Granados, Sagi
Grimberg, Christoph Hellwig, Christophe JAILLET)
- Fix and cleanup nvme-fc req allocation (Chaitanya Kulkarni)
- Use the common tagset helpers in nvme-pci driver (Christoph
Hellwig)
- Cleanup the nvme-pci removal path (Christoph Hellwig)
- Use kstrtobool() instead of strtobool (Christophe JAILLET)
- Allow unprivileged passthrough of Identify Controller (Joel
Granados)
- Support io stats on the mpath device (Sagi Grimberg)
- Minor nvmet cleanup (Sagi Grimberg)
- MD pull requests via Song:
- Code cleanups (Christoph)
- Various fixes
- Floppy pull request from Denis:
- Fix a memory leak in the init error path (Yuan)
- Series fixing some batch wakeup issues with sbitmap (Gabriel)
- Removal of the pktcdvd driver that was deprecated more than 5 years
ago, and subsequent removal of the devnode callback in struct
block_device_operations as no users are now left (Greg)
- Fix for partition read on an exclusively opened bdev (Jan)
- Series of elevator API cleanups (Jinlong, Christoph)
- Series of fixes and cleanups for blk-iocost (Kemeng)
- Series of fixes and cleanups for blk-throttle (Kemeng)
- Series adding concurrent support for sync queues in BFQ (Yu)
- Series bringing drbd a bit closer to the out-of-tree maintained
version (Christian, Joel, Lars, Philipp)
- Misc drbd fixes (Wang)
- blk-wbt fixes and tweaks for enable/disable (Yu)
- Fixes for mq-deadline for zoned devices (Damien)
- Add support for read-only and offline zones for null_blk
(Shin'ichiro)
- Series fixing the delayed holder tracking, as used by DM (Yu,
Christoph)
- Series enabling bio alloc caching for IRQ based IO (Pavel)
- Series enabling userspace peer-to-peer DMA (Logan)
- BFQ waker fixes (Khazhismel)
- Series fixing elevator refcount issues (Christoph, Jinlong)
- Series cleaning up references around queue destruction (Christoph)
- Series doing quiesce by tagset, enabling cleanups in drivers
(Christoph, Chao)
- Series untangling the queue kobject and queue references (Christoph)
- Misc fixes and cleanups (Bart, David, Dawei, Jinlong, Kemeng, Ye,
Yang, Waiman, Shin'ichiro, Randy, Pankaj, Christoph)
* tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux: (247 commits)
blktrace: Fix output non-blktrace event when blk_classic option enabled
block: sed-opal: Don't include <linux/kernel.h>
sed-opal: allow using IOC_OPAL_SAVE for locking too
blk-cgroup: Fix typo in comment
block: remove bio_set_op_attrs
nvmet: don't open-code NVME_NS_ATTR_RO enumeration
nvme-pci: use the tagset alloc/free helpers
nvme: add the Apple shared tag workaround to nvme_alloc_io_tag_set
nvme: only set reserved_tags in nvme_alloc_io_tag_set for fabrics controllers
nvme: consolidate setting the tagset flags
nvme: pass nr_maps explicitly to nvme_alloc_io_tag_set
block: bio_copy_data_iter
nvme-pci: split out a nvme_pci_ctrl_is_dead helper
nvme-pci: return early on ctrl state mismatch in nvme_reset_work
nvme-pci: rename nvme_disable_io_queues
nvme-pci: cleanup nvme_suspend_queue
nvme-pci: remove nvme_pci_disable
nvme-pci: remove nvme_disable_admin_queue
nvme: merge nvme_shutdown_ctrl into nvme_disable_ctrl
nvme: use nvme_wait_ready in nvme_shutdown_ctrl
...
Device mappers had always been getting the default 511 dma mask, but
the underlying device might have a larger alignment requirement. Since
this value is used to determine alloweable direct-io alignment, this
needs to be a stackable limit.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221110184501.2451620-2-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Document which functions do not modify the queue limits.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221025191755.1711437-3-bvanassche@acm.org
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch to a gendisk based API in preparation for moving all zone related
fields from the request_queue to the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare for storing the zone related field in struct gendisk instead
of struct request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Secure erase is a very different operation from discard in that it is
a data integrity operation vs hint. Fully split the limits and helper
infrastructure to make the separation more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2]
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need to inline these fairly larger helpers. Also fix the return value
to be unsigned, just like the field in struct queue_limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220415045258.199825-22-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need to inline these fairly larger helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220415045258.199825-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No more users of REQ_OP_WRITE_SAME or drivers implementing it are left,
so remove the infrastructure.
[mkp: fold in and tweak sysfs reporting fix]
Link: https://lore.kernel.org/r/20220209082828.2629273-8-hch@lst.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit a33df75c63 ("block: use an xarray for disk->part_tbl") modified
the method to check partition existence in host-aware zoned block
devices from disk_has_partitions() helper function call to empty check
of xarray disk->part_tbl. However, disk->part_tbl always has single
entry for disk->part0 and never becomes empty. This resulted in the
host-aware zoned devices always judged to have partitions, and it made
the sysfs queue/zoned attribute to be "none" instead of "host-aware"
regardless of partition existence in the devices.
This also caused DEBUG_LOCKS_WARN_ON(lock->magic != lock) for
sdkp->rev_mutex in scsi layer when the kernel detects host-aware zoned
device. Since block layer handled the host-aware zoned devices as non-
zoned devices, scsi layer did not have chance to initialize the mutex
for zone revalidation. Therefore, the warning was triggered.
To fix the issues, call the helper function disk_has_partitions() in
place of disk->part_tbl empty check. Since the function was removed with
the commit a33df75c63, reimplement it to walk through entries in the
xarray disk->part_tbl.
Fixes: a33df75c63 ("block: use an xarray for disk->part_tbl")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Cc: stable@vger.kernel.org # v5.14+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211026060115.753746-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the magic lookup through the kobject tree with an explicit
backpointer, given that the device model links are set up and torn
down at times when I/O is still possible, leading to potential
NULL or invalid pointer dereferences.
Fixes: edb0872f44 ("block: move the bdi from the request_queue to the gendisk")
Reported-by: syzbot <syzbot+aa0801b6b32dca9dda82@syzkaller.appspotmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/r/20210816134624.GA24234@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The backing device information only makes sense for file system I/O,
and thus belongs into the gendisk and not the lower level request_queue
structure. Move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210809141744.1203023-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
.. and rename the function to disk_update_readahead. This is in
preparation for moving the BDI from the request_queue to the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210809141744.1203023-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Printk ->disk_name directly for the disk and use the %pg format specifier
for the block device, which is equivalent to a bdevname call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=afQ9
-----END PGP SIGNATURE-----
Merge tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Turns out the bio max size change still has issues, so let's get it
reverted for 5.13-rc1. We'll shake out the issues there and defer it
to 5.14 instead"
* tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block:
Revert "bio: limit bio max size"
