This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/gpio/gpio-sama5d2-piobu.c:230:34: error: ‘sama5d2_piobu_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove these assignment all at once.
For the details one may look into the of_gpio_dev_init() implementation.
While at it, remove duplicate parent device assignment where it is the case.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
No attempt has been made to provide proper descriptions for each of
the function arguments throughout the file. Simply demote all
kerneldoc headers to basic function headers.
Fixes the following W=1 kernel build warnings:
drivers/gpio/gpio-sama5d2-piobu.c:59: warning: Function parameter or member 'chip' not described in 'sama5d2_piobu_setup_pin'
drivers/gpio/gpio-sama5d2-piobu.c:59: warning: Function parameter or member 'pin' not described in 'sama5d2_piobu_setup_pin'
drivers/gpio/gpio-sama5d2-piobu.c:81: warning: Function parameter or member 'chip' not described in 'sama5d2_piobu_write_value'
drivers/gpio/gpio-sama5d2-piobu.c:81: warning: Function parameter or member 'pin' not described in 'sama5d2_piobu_write_value'
drivers/gpio/gpio-sama5d2-piobu.c:81: warning: Function parameter or member 'mask' not described in 'sama5d2_piobu_write_value'
drivers/gpio/gpio-sama5d2-piobu.c:81: warning: Function parameter or member 'value' not described in 'sama5d2_piobu_write_value'
drivers/gpio/gpio-sama5d2-piobu.c:97: warning: Function parameter or member 'chip' not described in 'sama5d2_piobu_read_value'
drivers/gpio/gpio-sama5d2-piobu.c:97: warning: Function parameter or member 'pin' not described in 'sama5d2_piobu_read_value'
drivers/gpio/gpio-sama5d2-piobu.c:97: warning: Function parameter or member 'mask' not described in 'sama5d2_piobu_read_value'
drivers/gpio/gpio-sama5d2-piobu.c:116: warning: Function parameter or member 'chip' not described in 'sama5d2_piobu_get_direction'
drivers/gpio/gpio-sama5d2-piobu.c:116: warning: Function parameter or member 'pin' not described in 'sama5d2_piobu_get_direction'
drivers/gpio/gpio-sama5d2-piobu.c:131: warning: Function parameter or member 'chip' not described in 'sama5d2_piobu_direction_input'
drivers/gpio/gpio-sama5d2-piobu.c:131: warning: Function parameter or member 'pin' not described in 'sama5d2_piobu_direction_input'
drivers/gpio/gpio-sama5d2-piobu.c:140: warning: Function parameter or member 'chip' not described in 'sama5d2_piobu_direction_output'
drivers/gpio/gpio-sama5d2-piobu.c:140: warning: Function parameter or member 'pin' not described in 'sama5d2_piobu_direction_output'
drivers/gpio/gpio-sama5d2-piobu.c:140: warning: Function parameter or member 'value' not described in 'sama5d2_piobu_direction_output'
drivers/gpio/gpio-sama5d2-piobu.c:154: warning: Function parameter or member 'chip' not described in 'sama5d2_piobu_get'
drivers/gpio/gpio-sama5d2-piobu.c:154: warning: Function parameter or member 'pin' not described in 'sama5d2_piobu_get'
drivers/gpio/gpio-sama5d2-piobu.c:174: warning: Function parameter or member 'chip' not described in 'sama5d2_piobu_set'
drivers/gpio/gpio-sama5d2-piobu.c:174: warning: Function parameter or member 'pin' not described in 'sama5d2_piobu_set'
drivers/gpio/gpio-sama5d2-piobu.c:174: warning: Function parameter or member 'value' not described in 'sama5d2_piobu_set'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Andrei Stefanescu <andrei.stefanescu@microchip.com>
Link: https://lore.kernel.org/r/20200630133345.2232932-6-lee.jones@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Remove MODULE_VERSION(), as it isn't needed at all: the only version
making sense is the kernel version.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
It's hard for occasional GPIO code reader/writer to know if values 0/1
equal to IN or OUT. Use defined GPIO_LINE_DIRECTION_IN and
GPIO_LINE_DIRECTION_OUT to help them out.
NOTE - for gpio-amd-fch and gpio-bd9571mwv:
This commit also changes the return value for direction get to equal 1
for direction INPUT. Prior this commit these drivers might have
returned some other positive value but 1 for INPUT.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Set proper output level base on the argument of direction_output.
Also remove sama5d2_piobu_set_direction() as there is only one caller
now.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
PIOBU pins do not lose their voltage during Backup/Self-refresh.
This patch adds a simple GPIO controller for them and a
maintainer for the driver.
This driver adds support for using the pins as GPIO
offering the possibility to read/set the voltage.
Signed-off-by: Andrei Stefanescu <andrei.stefanescu@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
