mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 12:28:41 +08:00
c20eaf4411
3643 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Dave Jiang
|
c20eaf4411 |
cxl/region: Add sysfs attribute for locality attributes of CXL regions
Add read/write latencies and bandwidth sysfs attributes for the enabled CXL region. The bandwidth is the aggregated bandwidth of all devices that contribute to the CXL region. The latency is the worst latency of the device amongst all the devices that contribute to the CXL region. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20240308220055.2172956-11-dave.jiang@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
Linus Torvalds
|
7efc0eb825 |
Char/Misc changes for 6.8-rc5
Here is a small set of char/misc and IIO driver fixes for 6.8-rc5 Included in here are: - lots of iio driver fixes for reported issues - nvmem device naming fixup for reported problem - interconnect driver fixes for reported issues All of these have been in linux-next for a while with no reported the issues (the nvmem patch was included in a different branch in linux-next before sent to me for inclusion here.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZdC4jQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykGSACdEb+xhXVI0SeTGb9mSDwcYk3MWz8AoKo/ivvf LCLRlZfd5ajqfahZzVt/ =Zy4F -----END PGP SIGNATURE----- Merge tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / miscdriver fixes from Greg KH: "Here is a small set of char/misc and IIO driver fixes for 6.8-rc5. Included in here are: - lots of iio driver fixes for reported issues - nvmem device naming fixup for reported problem - interconnect driver fixes for reported issues All of these have been in linux-next for a while with no reported the issues (the nvmem patch was included in a different branch in linux-next before sent to me for inclusion here)" * tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits) nvmem: include bit index in cell sysfs file name iio: adc: ad4130: only set GPIO_CTRL if pin is unused iio: adc: ad4130: zero-initialize clock init data interconnect: qcom: x1e80100: Add missing ACV enable_mask interconnect: qcom: sm8650: Use correct ACV enable_mask iio: accel: bma400: Fix a compilation problem iio: commom: st_sensors: ensure proper DMA alignment iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier staging: iio: ad5933: fix type mismatch regression iio: humidity: hdc3020: fix temperature offset iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup() iio: adc: ad_sigma_delta: ensure proper DMA alignment iio: imu: adis: ensure proper DMA alignment iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry iio: imu: bno055: serdev requires REGMAP iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC iio: pressure: bmp280: Add missing bmp085 to SPI id table iio: core: fix memleak in iio_device_register_sysfs interconnect: qcom: sm8550: Enable sync_state ... |
||
Arnd Bergmann
|
e20f378d99 |
nvmem: include bit index in cell sysfs file name
Creating sysfs files for all Cells caused a boot failure for linux-6.8-rc1 on
Apple M1, which (in downstream dts files) has multiple nvmem cells that use the
same byte address. This causes the device probe to fail with
[ 0.605336] sysfs: cannot create duplicate filename '/devices/platform/soc@200000000/2922bc000.efuse/apple_efuses_nvmem0/cells/efuse@a10'
[ 0.605347] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S 6.8.0-rc1-arnd-5+ #133
[ 0.605355] Hardware name: Apple Mac Studio (M1 Ultra, 2022) (DT)
[ 0.605362] Call trace:
[ 0.605365] show_stack+0x18/0x2c
[ 0.605374] dump_stack_lvl+0x60/0x80
[ 0.605383] dump_stack+0x18/0x24
[ 0.605388] sysfs_warn_dup+0x64/0x80
[ 0.605395] sysfs_add_bin_file_mode_ns+0xb0/0xd4
[ 0.605402] internal_create_group+0x268/0x404
[ 0.605409] sysfs_create_groups+0x38/0x94
[ 0.605415] devm_device_add_groups+0x50/0x94
[ 0.605572] nvmem_populate_sysfs_cells+0x180/0x1b0
[ 0.605682] nvmem_register+0x38c/0x470
[ 0.605789] devm_nvmem_register+0x1c/0x6c
[ 0.605895] apple_efuses_probe+0xe4/0x120
[ 0.606000] platform_probe+0xa8/0xd0
As far as I can tell, this is a problem for any device with multiple cells on
different bits of the same address. Avoid the issue by changing the file name
to include the first bit number.
Fixes:
|
||
Breno Leitao
|
5b3fbd61b9 |
net: sysfs: Fix /sys/class/net/<iface> path for statistics
The Documentation/ABI/testing/sysfs-class-net-statistics documentation
is pointing to the wrong path for the interface. Documentation is
pointing to /sys/class/<iface>, instead of /sys/class/net/<iface>.
Fix it by adding the `net/` directory before the interface.
Fixes:
|
||
|
Linus Torvalds
|
9c2f0338bb |
drm fixes for 6.8-rc3
dma-buf:
- heaps CMA page accounting fix
virtio-gpu:
- fix segment size
xe:
- A crash fix
- A fix for an assert due to missing mem_acces ref
- Only allow a single user-fence per exec / bind.
- Some sparse warning fixes
- Two fixes for compilation failures on various odd
combinations of gcc / arch pointed out on LKML.
- Fix a fragile partial allocation pointed out on LKML.
- A sysfs ABI documentation warning fix
amdgpu:
- Fix reboot issue seen on some 7000 series dGPUs
- Fix client init order for KFD
- Misc display fixes
- USB-C fix
- DCN 3.5 fixes
- Fix issues with GPU scheduler and GPU reset
- GPU firmware loading fix
- Misc fixes
- GC 11.5 fix
- VCN 4.0.5 fix
- IH overflow fix
amdkfd:
- SVM fixes
- Trap handler fix
- Fix device permission lookup
- Properly reserve BO before validating it
nouveau:
- fence/irq lock deadlock fix (second attempt)
- gsp command size fix
-----BEGIN PGP SIGNATURE-----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=9BzV
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-02-03' of git://anongit.freedesktop.org/drm/drm
Pul drm fixes from Dave Airlie:
"Regular weekly fixes, mostly amdgpu and xe. One nouveau fix is a
better fix for the deadlock and also helps with a sync race we were
seeing.
dma-buf:
- heaps CMA page accounting fix
virtio-gpu:
- fix segment size
xe:
- A crash fix
- A fix for an assert due to missing mem_acces ref
- Only allow a single user-fence per exec / bind.
- Some sparse warning fixes
- Two fixes for compilation failures on various odd combinations of
gcc / arch pointed out on LKML.
- Fix a fragile partial allocation pointed out on LKML.
- A sysfs ABI documentation warning fix
amdgpu:
- Fix reboot issue seen on some 7000 series dGPUs
- Fix client init order for KFD
- Misc display fixes
- USB-C fix
- DCN 3.5 fixes
- Fix issues with GPU scheduler and GPU reset
- GPU firmware loading fix
- Misc fixes
- GC 11.5 fix
- VCN 4.0.5 fix
- IH overflow fix
amdkfd:
- SVM fixes
- Trap handler fix
- Fix device permission lookup
- Properly reserve BO before validating it
nouveau:
- fence/irq lock deadlock fix (second attempt)
- gsp command size fix
* tag 'drm-fixes-2024-02-03' of git://anongit.freedesktop.org/drm/drm: (35 commits)
nouveau: offload fence uevents work to workqueue
nouveau/gsp: use correct size for registry rpc.
drm/amdgpu/pm: Use inline function for IP version check
drm/hwmon: Fix abi doc warnings
drm/xe: Make all GuC ABI shift values unsigned
drm/xe/vm: Subclass userptr vmas
drm/xe: Use LRC prefix rather than CTX prefix in lrc desc defines
drm/xe: Don't use __user error pointers
drm/xe: Annotate mcr_[un]lock()
drm/xe: Only allow 1 ufence per exec / bind IOCTL
drm/xe: Grab mem_access when disabling C6 on skip_guc_pc platforms
drm/xe: Fix crash in trace_dma_fence_init()
drm/amdgpu: Reset IH OVERFLOW_CLEAR bit
drm/amdgpu: remove asymmetrical irq disabling in vcn 4.0.5 suspend
drm/amdgpu: drm/amdgpu: remove golden setting for gfx 11.5.0
drm/amdkfd: reserve the BO before validating it
drm/amdgpu: Fix missing error code in 'gmc_v6/7/8/9_0_hw_init()'
drm/amd/display: Fix buffer overflow in 'get_host_router_total_dp_tunnel_bw()'
drm/amd/display: Add NULL check for kzalloc in 'amdgpu_dm_atomic_commit_tail()'
drm/amd: Don't init MEC2 firmware when it fails to load
...
|
||
Dave Airlie
|
111a3f0afb |
UAPI Changes:
- Only allow a single user-fence per exec / bind. The reason for this clarification fix is a limitation in the implementation which can be lifted moving forward, if needed. Driver Changes: - A crash fix - A fix for an assert due to missing mem_acces ref - Only allow a single user-fence per exec / bind. - Some sparse warning fixes - Two fixes for compilation failures on various odd combinations of gcc / arch pointed out on LKML. - Fix a fragile partial allocation pointed out on LKML. Cross-driver Change: - A sysfs ABI documentation warning fix This also touches i915 and is acked by i915 maintainers. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZbt/9gAKCRC4FpNVCsYG v5ioAP4wD+RIZ9iJ9DOG/UoQEieOje0JFjjdrwtPlUmt/kpBJQD/fvsArL0y/o3Z cWahxhlpkqunNSG8r7lhcLMlnrK16gw= =4Dmq -----END PGP SIGNATURE----- Merge tag 'drm-xe-fixes-2024-02-01' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes UAPI Changes: - Only allow a single user-fence per exec / bind. The reason for this clarification fix is a limitation in the implementation which can be lifted moving forward, if needed. Driver Changes: - A crash fix - A fix for an assert due to missing mem_acces ref - Only allow a single user-fence per exec / bind. - Some sparse warning fixes - Two fixes for compilation failures on various odd combinations of gcc / arch pointed out on LKML. - Fix a fragile partial allocation pointed out on LKML. Cross-driver Change: - A sysfs ABI documentation warning fix This also touches i915 and is acked by i915 maintainers. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZbuCYdMDVK-kAWC5@fedora |
||
|
Linus Torvalds
|
41b9fb381a |
Including fixes from netfilter.
As Paolo promised we continue to hammer out issues in our selftests.
This is not the end but probably the peak.
Current release - regressions:
- smc: fix incorrect SMC-D link group matching logic
Current release - new code bugs:
- eth: bnxt: silence WARN() when device skips a timestamp, it happens
Previous releases - regressions:
- ipmr: fix null-deref when forwarding mcast packets
- conntrack: evaluate window negotiation only for packets in the REPLY
direction, otherwise SYN retransmissions trigger incorrect window
scale negotiation
- ipset: fix performance regression in swap operation
Previous releases - always broken:
- tcp: add sanity checks to types of pages getting into
the rx zerocopy path, we only support basic NIC -> user,
no page cache pages etc.
- ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()
- nt_tables: more input sanitization changes
- dsa: mt7530: fix 10M/100M speed on MediaTek MT7988 switch
- bridge: mcast: fix loss of snooping after long uptime,
jiffies do wrap on 32bit
- xen-netback: properly sync TX responses, protect with locking
- phy: mediatek-ge-soc: sync calibration values with MediaTek SDK,
increase connection stability
- eth: pds: fixes for various teardown, and reset races
Misc:
- hsr: silence WARN() if we can't alloc supervision frame, it happens
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=UJVq
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
As Paolo promised we continue to hammer out issues in our selftests.
This is not the end but probably the peak.
Current release - regressions:
- smc: fix incorrect SMC-D link group matching logic
Current release - new code bugs:
- eth: bnxt: silence WARN() when device skips a timestamp, it happens
Previous releases - regressions:
- ipmr: fix null-deref when forwarding mcast packets
- conntrack: evaluate window negotiation only for packets in the
REPLY direction, otherwise SYN retransmissions trigger incorrect
window scale negotiation
- ipset: fix performance regression in swap operation
Previous releases - always broken:
- tcp: add sanity checks to types of pages getting into the rx
zerocopy path, we only support basic NIC -> user, no page cache
pages etc.
- ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()
- nt_tables: more input sanitization changes
- dsa: mt7530: fix 10M/100M speed on MediaTek MT7988 switch
- bridge: mcast: fix loss of snooping after long uptime, jiffies do
wrap on 32bit
- xen-netback: properly sync TX responses, protect with locking
- phy: mediatek-ge-soc: sync calibration values with MediaTek SDK,
increase connection stability
- eth: pds: fixes for various teardown, and reset races
Misc:
- hsr: silence WARN() if we can't alloc supervision frame, it
happens"
* tag 'net-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
doc/netlink/specs: Add missing attr in rt_link spec
idpf: avoid compiler padding in virtchnl2_ptype struct
selftests: mptcp: join: stop transfer when check is done (part 2)
selftests: mptcp: join: stop transfer when check is done (part 1)
selftests: mptcp: allow changing subtests prefix
selftests: mptcp: decrease BW in simult flows
selftests: mptcp: increase timeout to 30 min
selftests: mptcp: add missing kconfig for NF Mangle
selftests: mptcp: add missing kconfig for NF Filter in v6
selftests: mptcp: add missing kconfig for NF Filter
mptcp: fix data re-injection from stale subflow
selftests: net: enable some more knobs
selftests: net: add missing config for NF_TARGET_TTL
selftests: forwarding: List helper scripts in TEST_FILES Makefile variable
selftests: net: List helper scripts in TEST_FILES Makefile variable
selftests: net: Remove executable bits from library scripts
selftests: bonding: Check initial state
selftests: team: Add missing config options
hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove
xen-netback: properly sync TX responses
...
|
||
|
Breno Leitao
|
ae3f4b4464 |
net: sysfs: Fix /sys/class/net/<iface> path
The documentation is pointing to the wrong path for the interface.
Documentation is pointing to /sys/class/<iface>, instead of
/sys/class/net/<iface>.
Fix it by adding the `net/` directory before the interface.
Fixes:
|
||
Badal Nilawar
|
5f16ee27cd |
drm/hwmon: Fix abi doc warnings
This fixes warnings in xe, i915 hwmon docs: Warning: /sys/devices/.../hwmon/hwmon<i>/curr1_crit is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:35 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:52 Warning: /sys/devices/.../hwmon/hwmon<i>/energy1_input is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:54 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:65 Warning: /sys/devices/.../hwmon/hwmon<i>/in0_input is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:46 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:0 Warning: /sys/devices/.../hwmon/hwmon<i>/power1_crit is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:22 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:39 Warning: /sys/devices/.../hwmon/hwmon<i>/power1_max is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:0 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:8 Warning: /sys/devices/.../hwmon/hwmon<i>/power1_max_interval is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:62 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:30 Warning: /sys/devices/.../hwmon/hwmon<i>/power1_rated_max is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:14 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:22 Use a path containing the driver name to differentiate the documentation of each entry. Fixes: |
||
Hans de Goede
|
41237735cc |
platform/x86: silicom-platform: Add missing "Description:" for power_cycle sysfs attr
The Documentation/ABI/testing/sysfs-platform-silicom entry for the power_cycle sysfs attr is missing the "Description:" keyword, add this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240108140655.547261-1-hdegoede@redhat.com |
||
|
Linus Torvalds
|
db5ccb9eb2 |
cxl for v6.8
- Add support for parsing the Coherent Device Attribute Table (CDAT) - Add support for calculating a platform CXL QoS class from CDAT data - Unify the tracing of EFI CXL Events with native CXL Events. - Add Get Timestamp support - Miscellaneous cleanups and fixups -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZaHVvAAKCRDfioYZHlFs Z3sCAQDPHSsHmj845k4lvKbWjys3eh78MKKEFyTXLQgYhOlsGAEAigQY2ZiSum52 nwdIgpOOADNt0Iq6yXuLsmn9xvY9bAU= =HjCl -----END PGP SIGNATURE----- Merge tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull CXL (Compute Express Link) updates from Dan Williams: "The bulk of this update is support for enumerating the performance capabilities of CXL memory targets and connecting that to a platform CXL memory QoS class. Some follow-on work remains to hook up this data into core-mm policy, but that is saved for v6.9. The next significant update is unifying how CXL event records (things like background scrub errors) are processed between so called "firmware first" and native error record retrieval. The CXL driver handler that processes the record retrieved from the device mailbox is now the handler for that same record format coming from an EFI/ACPI notification source. This also contains miscellaneous feature updates, like Get Timestamp, and other fixups. Summary: - Add support for parsing the Coherent Device Attribute Table (CDAT) - Add support for calculating a platform CXL QoS class from CDAT data - Unify the tracing of EFI CXL Events with native CXL Events. - Add Get Timestamp support - Miscellaneous cleanups and fixups" * tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (41 commits) cxl/core: use sysfs_emit() for attr's _show() cxl/pci: Register for and process CPER events PCI: Introduce cleanup helpers for device reference counts and locks acpi/ghes: Process CXL Component Events cxl/events: Create a CXL event union cxl/events: Separate UUID from event structures cxl/events: Remove passing a UUID to known event traces cxl/events: Create common event UUID defines cxl/events: Promote CXL event structures to a core header cxl: Refactor to use __free() for cxl_root allocation in cxl_endpoint_port_probe() cxl: Refactor to use __free() for cxl_root allocation in cxl_find_nvdimm_bridge() cxl: Fix device reference leak in cxl_port_perf_data_calculate() cxl: Convert find_cxl_root() to return a 'struct cxl_root *' cxl: Introduce put_cxl_root() helper cxl/port: Fix missing target list lock cxl/port: Fix decoder initialization when nr_targets > interleave_ways cxl/region: fix x9 interleave typo cxl/trace: Pass UUID explicitly to event traces cxl/region: use %pap format to print resource_size_t cxl/region: Add dev_dbg() detail on failure to allocate HPA space ... |
||
|
Linus Torvalds
|
244aefb1c6 |
VFIO updates for v6.8-rc1
- Add debugfs support, initially used for reporting device migration
state. (Longfang Liu)
- Fixes and support for migration dirty tracking across multiple IOVA
regions in the pds-vfio-pci driver. (Brett Creeley)
- Improved IOMMU allocation accounting visibility. (Pasha Tatashin)
- Virtio infrastructure and a new virtio-vfio-pci variant driver, which
provides emulation of a legacy virtio interfaces on modern virtio
hardware for virtio-net VF devices where the PF driver exposes
support for legacy admin queues, ie. an emulated IO BAR on an SR-IOV
VF to provide driver ABI compatibility to legacy devices.
(Yishai Hadas & Feng Liu)
- Migration fixes for the hisi-acc-vfio-pci variant driver.
(Shameer Kolothum)
- Kconfig dependency fix for new virtio-vfio-pci variant driver.
(Arnd Bergmann)
-----BEGIN PGP SIGNATURE-----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=IuK2
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.8-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Add debugfs support, initially used for reporting device migration
state (Longfang Liu)
- Fixes and support for migration dirty tracking across multiple IOVA
regions in the pds-vfio-pci driver (Brett Creeley)
- Improved IOMMU allocation accounting visibility (Pasha Tatashin)
- Virtio infrastructure and a new virtio-vfio-pci variant driver, which
provides emulation of a legacy virtio interfaces on modern virtio
hardware for virtio-net VF devices where the PF driver exposes
support for legacy admin queues, ie. an emulated IO BAR on an SR-IOV
VF to provide driver ABI compatibility to legacy devices (Yishai
Hadas & Feng Liu)
- Migration fixes for the hisi-acc-vfio-pci variant driver (Shameer
Kolothum)
- Kconfig dependency fix for new virtio-vfio-pci variant driver (Arnd
Bergmann)
* tag 'vfio-v6.8-rc1' of https://github.com/awilliam/linux-vfio: (22 commits)
vfio/virtio: fix virtio-pci dependency
hisi_acc_vfio_pci: Update migration data pointer correctly on saving/resume
vfio/virtio: Declare virtiovf_pci_aer_reset_done() static
vfio/virtio: Introduce a vfio driver over virtio devices
vfio/pci: Expose vfio_pci_core_iowrite/read##size()
vfio/pci: Expose vfio_pci_core_setup_barmap()
virtio-pci: Introduce APIs to execute legacy IO admin commands
virtio-pci: Initialize the supported admin commands
virtio-pci: Introduce admin commands
virtio-pci: Introduce admin command sending function
virtio-pci: Introduce admin virtqueue
virtio: Define feature bit for administration virtqueue
vfio/type1: account iommu allocations
vfio/pds: Add multi-region support
vfio/pds: Move seq/ack bitmaps into region struct
vfio/pds: Pass region info to relevant functions
vfio/pds: Move and rename region specific info
vfio/pds: Only use a single SGL for both seq and ack
vfio/pds: Fix calculations in pds_vfio_dirty_sync
MAINTAINERS: Add vfio debugfs interface doc link
...
|
||
|
Linus Torvalds
|
80955ae955 |
Driver core changes for 6.8-rc1
Here are the set of driver core and kernfs changes for 6.8-rc1. Nothing
major in here this release cycle, just lots of small cleanups and some
tweaks on kernfs that in the very end, got reverted and will come back
in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeOrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymtcwCffzvKKkSY9qAp6+0v2WQNkZm1JWoAoJCPYUwF
If6wEoPLWvRfKx4gIoq9
=D96r
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are the set of driver core and kernfs changes for 6.8-rc1.
Nothing major in here this release cycle, just lots of small cleanups
and some tweaks on kernfs that in the very end, got reverted and will
come back in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues"
* tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits)
Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock"
kernfs: convert kernfs_idr_lock to an irq safe raw spinlock
class: fix use-after-free in class_register()
PM: clk: make pm_clk_add_notifier() take a const pointer
EDAC: constantify the struct bus_type usage
kernfs: fix reference to renamed function
driver core: device.h: fix Excess kernel-doc description warning
driver core: class: fix Excess kernel-doc description warning
driver core: mark remaining local bus_type variables as const
driver core: container: make container_subsys const
driver core: bus: constantify subsys_register() calls
driver core: bus: make bus_sort_breadthfirst() take a const pointer
kernfs: d_obtain_alias(NULL) will do the right thing...
driver core: Better advertise dev_err_probe()
kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy()
initramfs: Expose retained initrd as sysfs file
fs/kernfs/dir: obey S_ISGID
kernel/cgroup: use kernfs_create_dir_ns()
...
|
||
|
Linus Torvalds
|
296455ade1 |
Char/Misc and other Driver changes for 6.8-rc1
Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Lots of stuff in here, but first off, you will get a merge conflict in drivers/android/binder_alloc.c when merging this tree due to changing coming in through the -mm tree. The resolution of the merge issue can be found here: https://lore.kernel.org/r/20231207134213.25631ae9@canb.auug.org.au or in a simpler patch form in that thread: https://lore.kernel.org/r/ZXHzooF07LfQQYiE@google.com If there are issues with the merge of this file, please let me know. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues (other than the binder merge conflict.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeMMQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynWNgCfQ/Yz7QO6EMLDwHO5LRsb3YMhjL4AoNVdanjP YoI7f1I4GBcC0GKNfK6s =+Kyv -----END PGP SIGNATURE----- Merge tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits) android: removed duplicate linux/errno uio: Fix use-after-free in uio_open drivers: soc: xilinx: add check for platform firmware: xilinx: Export function to use in other module scripts/tags.sh: remove find_sources scripts/tags.sh: use -n to test archinclude scripts/tags.sh: add local annotation scripts/tags.sh: use more portable -path instead of -wholename scripts/tags.sh: Update comment (addition of gtags) firmware: zynqmp: Convert to platform remove callback returning void firmware: turris-mox-rwtm: Convert to platform remove callback returning void firmware: stratix10-svc: Convert to platform remove callback returning void firmware: stratix10-rsu: Convert to platform remove callback returning void firmware: raspberrypi: Convert to platform remove callback returning void firmware: qemu_fw_cfg: Convert to platform remove callback returning void firmware: mtk-adsp-ipc: Convert to platform remove callback returning void firmware: imx-dsp: Convert to platform remove callback returning void firmware: coreboot_table: Convert to platform remove callback returning void firmware: arm_scpi: Convert to platform remove callback returning void firmware: arm_scmi: Convert to platform remove callback returning void ... |
||
|
Linus Torvalds
|
a3f4a07b50 |
I3C for 6.7
Core: - Add a sysfs control for hotjoin - Add fallback method for GETMXDS CCC Drivers: - cdns: fix prescale for i2c clock - mipi-i3c-hci: more fixes now that the driver is used - svc: hotjoin enabling/disabling support -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmWkbYoACgkQY6TcMGxw OjKuNg//acb3t875RGkDIAcxcxfM8TLwsvo7xYSglQxBRfFqKuj+SzqeCg1szO6S x1aoiCNFKMTgwrJuGFuVCawW2PYqZTcSdQnpdli3HzI9bKNc/RxojDD9R1dztZKh nhOtycZM1ScnJ0SgbXAYakb+IcL2L3K2O5DjdtKBXdfTR74RvjWfxYB3LxXjvEEf CJZ5lapcTuJZVCZBB/KQoshZmZYjA9kySgcqFomQ+ShlYRXbMOW6VCceU5HsDy07 7bfs7caGKu1VwUbDmiV3lvbZUkPiGjspStc5zYQtktORCGh6sP6uBZjB/m3vKaJ2 IsnkqIOXHmh3an8MeGVqWSvR54FzfdXSXW6Xr+0XKvoT8rBc4d8c80HO3Kw3t5Rv 4y/ygYaxFxfcCfhk031ftjaux4DLMFvlGV3pa+OGHdxGUYeFawYDsHZtweMspgBx WRvbOY4wc00zrwnni9L8BqpVwIfAvwkwwMvfgJS4mA+h/4YrbXp6QR/iM2ij2zHl azVDVrSOGLIiPxgqqpGWg09hkrkYWuEbhs61ywQJoeDSaGpdxOKC5VBB0ygwIpfY bsSqKhIjOCAkmRF02XX/atNKu+RNeg1N/F9mDCVhOzhPqNjIPlhvLhEGEuNLwEvK DrVBEWyJlD53S3KBm4Fba04+JngJXkxbIQxYWnYLbEBafU2dVjo= =mysu -----END PGP SIGNATURE----- Merge tag 'i3c/for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Alexandre Belloni: "We are continuing to see more fixes as hardware is available and code is actually getting tested. Core: - Add a sysfs control for hotjoin - Add fallback method for GETMXDS CCC Drivers: - cdns: fix prescale for i2c clock - mipi-i3c-hci: more fixes now that the driver is used - svc: hotjoin enabling/disabling support" * tag 'i3c/for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: document hotjoin sysfs entry i3c: master: fix kernel-doc check warning i3c: master: cdns: Update maximum prescaler value for i2c clock i3c: master: fix Excess kernel-doc description warning i3c: master: svc: return actual transfer data len i3c: master: svc: rename read_len as actual_len i3c: add actual_len in i3c_priv_xfer i3c: master: svc: add hot join support i3c: master: add enable(disable) hot join in sys entry i3c: master: Fix build error i3c: Add fallback method for GETMXDS CCC i3c: mipi-i3c-hci: Add DMA bounce buffer for private transfers i3c: mipi-i3c-hci: Handle I3C address header error in hci_cmd_v1_daa() i3c: mipi-i3c-hci: Do not overallocate transfers in hci_cmd_v1_daa() i3c: mipi-i3c-hci: Report NACK response from CCC command to core |
||
|
Linus Torvalds
|
08df80a3c5 |
- New Drivers
- Add support for Allwinner A100 RGB LED controller
- Add support for Maxim 5970 Dual Hot-swap controller
- New Device Support
- Add support for AW20108 to Awinic LED driver
- New Functionality
- Extend support for Net speeds to include; 2.5G, 5G and 10G
- Allow tx/rx and cts/dsr/dcd/rng TTY LEDS to be turned on and off via sysfs if required
- Add support for hardware control in AW200xx
- Fix-ups
- Use safer methods for string handling
- Improve error handling; return proper error values, simplify, avoid duplicates, etc
- Replace Mutex use with the Completion mechanism
- Fix include lists; alphabetise, remove unused, explicitly add used
- Use generic platform device properties
- Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations
- Device Tree binding adaptions/conversions/creation
- Continue work to remove superfluous platform .remove() call-backs
- Remove superfluous/defunct code
- Trivial; whitespace, unused variables, spelling, clean-ups, etc
- Avoid unnecessary duplicate locks
- Bug Fixes
- Repair Kconfig based dependency lists
- Ensure unused dynamically allocated data is freed after use
- Fix support for brightness control
- Add missing sufficient delays during reset to ensure correct operation
- Avoid division-by-zero issues
-----BEGIN PGP SIGNATURE-----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=/f98
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Drivers:
- Add support for Allwinner A100 RGB LED controller
- Add support for Maxim 5970 Dual Hot-swap controller
New Device Support:
- Add support for AW20108 to Awinic LED driver
New Functionality:
- Extend support for Net speeds to include; 2.5G, 5G and 10G
- Allow tx/rx and cts/dsr/dcd/rng TTY LEDS to be turned on and off
via sysfs if required
- Add support for hardware control in AW200xx
Fix-ups:
- Use safer methods for string handling
- Improve error handling; return proper error values, simplify,
avoid duplicates, etc
- Replace Mutex use with the Completion mechanism
- Fix include lists; alphabetise, remove unused, explicitly add used
- Use generic platform device properties
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Device Tree binding adaptions/conversions/creation
- Continue work to remove superfluous platform .remove() call-backs
- Remove superfluous/defunct code
- Trivial; whitespace, unused variables, spelling, clean-ups, etc
- Avoid unnecessary duplicate locks
Bug Fixes:
- Repair Kconfig based dependency lists
- Ensure unused dynamically allocated data is freed after use
- Fix support for brightness control
- Add missing sufficient delays during reset to ensure correct
operation
- Avoid division-by-zero issues"
* tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (45 commits)
leds: trigger: netdev: Add core support for hw not supporting fallback to LED sw control
leds: trigger: panic: Don't register panic notifier if creating the trigger failed
leds: sun50i-a100: Convert to be agnostic to property provider
leds: max5970: Add missing headers
leds: max5970: Make use of dev_err_probe()
leds: max5970: Make use of device properties
leds: max5970: Remove unused variable
leds: rgb: Drop obsolete dependency on COMPILE_TEST
leds: sun50i-a100: Avoid division-by-zero warning
leds: trigger: Remove unused function led_trigger_rename_static()
leds: qcom-lpg: Introduce a wrapper for getting driver data from a pwm chip
leds: gpio: Add kernel log if devm_fwnode_gpiod_get() fails
dt-bindings: leds: qcom,spmi-flash-led: Fix example node name
dt-bindings: leds: aw200xx: Fix led pattern and add reg constraints
dt-bindings: leds: awinic,aw200xx: Add AW20108 device
leds: aw200xx: Add support for aw20108 device
leds: aw200xx: Improve autodim calculation method
leds: aw200xx: Enable disable_locking flag in regmap config
leds: aw200xx: Add delay after software reset
dt-bindings: leds: aw200xx: Remove property "awinic,display-rows"
...
|
||
Alexandre Belloni
|
4fa0888f6f |
i3c: document hotjoin sysfs entry
The hotjoin syfs entry allows to enable or disable Hot-Join on the Current Controller of the I3C Bus. Link: https://lore.kernel.org/r/20240114225232.140860-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> |
||
|
Linus Torvalds
|
5dfec3cf3e |
hwmon updates for v6.8
- New drivers
* pmbus: Support for MPS Multi-phase mp2856/mp2857 controller
* pmbus: Support for MPS Multi-phase mp5990
* Driver for Gigabyte AORUS Waterforce AIO coolers
|
||
|
Linus Torvalds
|
cf65598d59 |
drm-next for 6.8:
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name
-----BEGIN PGP SIGNATURE-----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=nuw0
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This contains two major new drivers:
- imagination is a first driver for Imagination Technologies devices,
it only covers very specific devices, but there is hope to grow it
- xe is a reboot of the i915 GPU (shares display) side using a more
upstream focused development model, and trying to maximise code
sharing. It's not enabled for any hw by default, and will hopefully
get switched on for Intel's Lunarlake.
This also drops a bunch of the old UMS ioctls. It's been dead long
enough.
amdgpu has a bunch of new color management code that is being used in
the Steam Deck.
amdgpu also has a new ACPI WBRF interaction to help avoid radio
interference.
Otherwise it's the usual lots of changes in lots of places.
Detailed summary:
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name"
* tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits)
drm/amd/display: Allow z8/z10 from driver
drm/amd/display: fix bandwidth validation failure on DCN 2.1
drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well
drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm
drm/amd/display: Fix recent checkpatch errors in amdgpu_dm
Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole"
drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings()
drm/amd/display: Fix power_helpers.c codestyle
drm/amd/display: Fix hdcp_log.h codestyle
drm/amd/display: Fix hdcp2_execution.c codestyle
drm/amd/display: Fix hdcp_psp.h codestyle
drm/amd/display: Fix freesync.c codestyle
drm/amd/display: Fix hdcp_psp.c codestyle
drm/amd/display: Fix hdcp1_execution.c codestyle
drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init
drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()'
drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()'
drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c
drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()'
drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()'
...
|
||
|
Linus Torvalds
|
70d201a408 |
f2fs update for 6.8-rc1
In this series, we've some progress to support Zoned block device regarding to
the power-cut recovery flow and enabling checkpoint=disable feature which is
essential for Android OTA. Other than that, some patches touched sysfs entries
and tracepoints which are minor, while several bug fixes on error handlers and
compression flows are good to improve the overall stability.
Enhancement:
- enable checkpoint=disable for zoned block device
- sysfs entries such as discard status, discard_io_aware, dir_level
- tracepoints such as f2fs_vm_page_mkwrite(), f2fs_rename(), f2fs_new_inode()
- use shared inode lock during f2fs_fiemap() and f2fs_seek_block()
Bug fix:
- address some power-cut recovery issues on zoned block device
- handle errors and logics on do_garbage_collect(), f2fs_reserve_new_block(),
f2fs_move_file_range(), f2fs_recover_xattr_data()
- don't set FI_PREALLOCATED_ALL for partial write
- fix to update iostat correctly in f2fs_filemap_fault()
- fix to wait on block writeback for post_read case
- fix to tag gcing flag on page during block migration
- restrict max filesize for 16K f2fs
- fix to avoid dirent corruption
- explicitly null-terminate the xattr list
There are also several clean-up patches to remove dead codes and better
readability.
-----BEGIN PGP SIGNATURE-----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=MQl3
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs update from Jaegeuk Kim:
"In this series, we've some progress to support Zoned block device
regarding to the power-cut recovery flow and enabling
checkpoint=disable feature which is essential for Android OTA.
Other than that, some patches touched sysfs entries and tracepoints
which are minor, while several bug fixes on error handlers and
compression flows are good to improve the overall stability.
Enhancements:
- enable checkpoint=disable for zoned block device
- sysfs entries such as discard status, discard_io_aware, dir_level
- tracepoints such as f2fs_vm_page_mkwrite(), f2fs_rename(),
f2fs_new_inode()
- use shared inode lock during f2fs_fiemap() and f2fs_seek_block()
Bug fixes:
- address some power-cut recovery issues on zoned block device
- handle errors and logics on do_garbage_collect(),
f2fs_reserve_new_block(), f2fs_move_file_range(),
f2fs_recover_xattr_data()
- don't set FI_PREALLOCATED_ALL for partial write
- fix to update iostat correctly in f2fs_filemap_fault()
- fix to wait on block writeback for post_read case
- fix to tag gcing flag on page during block migration
- restrict max filesize for 16K f2fs
- fix to avoid dirent corruption
- explicitly null-terminate the xattr list
There are also several clean-up patches to remove dead codes and
better readability"
* tag 'f2fs-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (33 commits)
f2fs: show more discard status by sysfs
f2fs: Add error handling for negative returns from do_garbage_collect
f2fs: Constrain the modification range of dir_level in the sysfs
f2fs: Use wait_event_freezable_timeout() for freezable kthread
f2fs: fix to check return value of f2fs_recover_xattr_data
f2fs: don't set FI_PREALLOCATED_ALL for partial write
f2fs: fix to update iostat correctly in f2fs_filemap_fault()
f2fs: fix to check compress file in f2fs_move_file_range()
f2fs: fix to wait on block writeback for post_read case
f2fs: fix to tag gcing flag on page during block migration
f2fs: add tracepoint for f2fs_vm_page_mkwrite()
f2fs: introduce f2fs_invalidate_internal_cache() for cleanup
f2fs: update blkaddr in __set_data_blkaddr() for cleanup
f2fs: introduce get_dnode_addr() to clean up codes
f2fs: delete obsolete FI_DROP_CACHE
f2fs: delete obsolete FI_FIRST_BLOCK_WRITTEN
f2fs: Restrict max filesize for 16K f2fs
f2fs: let's finish or reset zones all the time
f2fs: check write pointers when checkpoint=disable
f2fs: fix write pointers on zoned device after roll forward
...
|
||
|
Linus Torvalds
|
22d29f1112 |
SCSI misc on 20240110
Updates to the usual drivers (ufs, mpi3mr, mpt3sas, lpfc, fnic,
hisi_sas, arcmsr, ) plus the usual assorted minor fixes and updates.
This time around there's only a single line update to the core, so
nothing major and barely anything minor.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZZ7roSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisha3lAQC5BAGM
7OKk39iOtsKdq8uxYAhYx871sNtwBp8+BSk1FgEAhy1hg7fgCnOvl7chbSNDR6p/
mW11fYi4j2UvxECT2tg=
=/tvT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, mpi3mr, mpt3sas, lpfc, fnic,
hisi_sas, arcmsr, ) plus the usual assorted minor fixes and updates.
This time around there's only a single line update to the core, so
nothing major and barely anything minor"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (135 commits)
scsi: ufs: core: Simplify ufshcd_auto_hibern8_update()
scsi: ufs: core: Rename ufshcd_auto_hibern8_enable() and make it static
scsi: ufs: qcom: Fix ESI vector mask
scsi: ufs: host: Fix kernel-doc warning
scsi: hisi_sas: Correct the number of global debugfs registers
scsi: hisi_sas: Rollback some operations if FLR failed
scsi: hisi_sas: Check before using pointer variables
scsi: hisi_sas: Replace with standard error code return value
scsi: hisi_sas: Set .phy_attached before notifing phyup event HISI_PHYE_PHY_UP_PM
scsi: ufs: core: Add sysfs node for UFS RTC update
scsi: ufs: core: Add UFS RTC support
scsi: ufs: core: Add ufshcd_is_ufs_dev_busy()
scsi: ufs: qcom: Remove unused definitions
scsi: ufs: qcom: Use ufshcd_rmwl() where applicable
scsi: ufs: qcom: Remove support for host controllers older than v2.0
scsi: ufs: qcom: Simplify ufs_qcom_{assert/deassert}_reset
scsi: ufs: qcom: Initialize cycles_in_1us variable in ufs_qcom_set_core_clk_ctrl()
scsi: ufs: qcom: Sort includes alphabetically
scsi: ufs: qcom: Remove unused ufs_qcom_hosts struct array
scsi: ufs: qcom: Use dev_err_probe() to simplify error handling of devm_gpiod_get_optional()
...
|
||
|
Linus Torvalds
|
f6597d1706 |
SoC: driver updates for 6.8
A new drivers/cache/ subsystem is added to contain drivers for abstracting
cache flush methods on riscv and potentially others, as this is needed for
handling non-coherent DMA but several SoCs require nonstandard hardware
methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and MT8195,
and driver support for MT8188 along with some code refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and hisilicon
-----BEGIN PGP SIGNATURE-----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=4bKY
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"A new drivers/cache/ subsystem is added to contain drivers for
abstracting cache flush methods on riscv and potentially others, as
this is needed for handling non-coherent DMA but several SoCs require
nonstandard hardware methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and
MT8195, and driver support for MT8188 along with some code
refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA
bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and
hisilicon"
* tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
memory: ti-emif-pm: Convert to platform remove callback returning void
memory: ti-aemif: Convert to platform remove callback returning void
memory: tegra210-emc: Convert to platform remove callback returning void
memory: tegra186-emc: Convert to platform remove callback returning void
memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
memory: exynos5422-dmc: Convert to platform remove callback returning void
memory: renesas-rpc-if: Convert to platform remove callback returning void
memory: omap-gpmc: Convert to platform remove callback returning void
memory: mtk-smi: Convert to platform remove callback returning void
memory: jz4780-nemc: Convert to platform remove callback returning void
memory: fsl_ifc: Convert to platform remove callback returning void
memory: fsl-corenet-cf: Convert to platform remove callback returning void
memory: emif: Convert to platform remove callback returning void
memory: brcmstb_memc: Convert to platform remove callback returning void
memory: brcmstb_dpfe: Convert to platform remove callback returning void
soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
firmware: qcom: qseecom: fix memory leaks in error paths
dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
soc: qcom: llcc: Fix typo in kernel-doc
dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
...
|
||
|
Linus Torvalds
|
0cb552aa97 |
This update includes the following changes:
API: - Add incremental lskcipher/skcipher processing. Algorithms: - Remove SHA1 from drbg. - Remove CFB and OFB. Drivers: - Add comp high perf mode configuration in hisilicon/zip. - Add support for 420xx devices in qat. - Add IAA Compression Accelerator driver. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmWdxR4ACgkQxycdCkmx i6fAjg//SqOwxeUYWpT4KdMCxGMn7U9iE3wJeX8nqfma3a62Wt2soey7H3GB9G7v gEh0OraOKIGeBtS8giIX83SZJOirMlgeE2tngxMmR9O95EUNR0XGnywF/emyt96z WcSN1IrRZ8qQzTASBF0KpV2Ir5mNzBiOwU9tVHIztROufA4C1fwKl7yhPM67C3MU 88vf1R+ZeWUbNbzQNC8oYIqU11dcNaMNhOVPiZCECKbIR6LqwUf3Swexz+HuPR/D WTSrb4J3Eeg77SMhI959/Hi53WeEyVW1vWYAVMgfTEFw6PESiOXyPeImfzUMFos6 fFYIAoQzoG5GlQeYwLLSoZAwtfY+f7gTNoaE+bnPk5317EFzFDijaXrkjjVKqkS2 OOBfxrMMIGNmxp7pPkt6HPnIvGNTo+SnbAdVIm6M3EN1K+BTGrj7/CTJkcT6XSyK nCBL6nbP7zMB1GJfCFGPvlIdW4oYnAfB1Q5YJ9tzYbEZ0t5NWxDKZ45RnM9xQp4Y 2V1zdfALdqmGRKBWgyUcqp1T4/AYRU0+WaQxz7gHw3BPR4QmfVLPRqiiR7OT0Z+P XFotOYD3epVXS1OUyZdLBn5+FXLnRd1uylQ+j8FNfnddr4Nr+tH1J6edK71NMvXG Tj7p5rP5bbgvVkD43ywsVnCI0w+9NS55mH5UP2Y4fSLS6p2tJAw= =yMmO -----END PGP SIGNATURE----- Merge tag 'v6.8-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add incremental lskcipher/skcipher processing Algorithms: - Remove SHA1 from drbg - Remove CFB and OFB Drivers: - Add comp high perf mode configuration in hisilicon/zip - Add support for 420xx devices in qat - Add IAA Compression Accelerator driver" * tag 'v6.8-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (172 commits) crypto: iaa - Account for cpu-less numa nodes crypto: scomp - fix req->dst buffer overflow crypto: sahara - add support for crypto_engine crypto: sahara - remove error message for bad aes request size crypto: sahara - remove unnecessary NULL assignments crypto: sahara - remove 'active' flag from sahara_aes_reqctx struct crypto: sahara - use dev_err_probe() crypto: sahara - use devm_clk_get_enabled() crypto: sahara - use BIT() macro crypto: sahara - clean up macro indentation crypto: sahara - do not resize req->src when doing hash operations crypto: sahara - fix processing hash requests with req->nbytes < sg->length crypto: sahara - improve error handling in sahara_sha_process() crypto: sahara - fix wait_for_completion_timeout() error handling crypto: sahara - fix ahash reqsize crypto: sahara - handle zero-length aes requests crypto: skcipher - remove excess kerneldoc members crypto: shash - remove excess kerneldoc members crypto: qat - generate dynamically arbiter mappings crypto: qat - add support for ring pair level telemetry ... |
||
|
Linus Torvalds
|
5fda5698c2 |
platform-drivers-x86 for v6.8-1
Highlights:
- Intel PMC / PMT / TPMI / uncore-freq / vsec improvements and
new platform support
- AMD PMC / PMF improvements and new platform support
- AMD ACPI based Wifi band RFI mitigation feature (WBRF)
- WMI bus driver cleanups and improvements (Armin Wolf)
- acer-wmi Predator PHN16-71 support
- New Silicom network appliance EC LEDs / GPIOs driver
The following is an automated git shortlog grouped by driver:
ACPI:
- scan: Add LNXVIDEO HID to ignore_serial_bus_ids[]
Add Silicom Platform Driver:
- Add Silicom Platform Driver
Documentation/driver-api:
- Add document about WBRF mechanism
ISST:
- Process read/write blocked feature status
Merge tag 'platform-drivers-x86-amd-wbrf-v6.8-1' into review-hans:
- Merge tag 'platform-drivers-x86-amd-wbrf-v6.8-1' into review-hans
Merge tag 'platform-drivers-x86-v6.7-3' into pdx86/for-next:
- Merge tag 'platform-drivers-x86-v6.7-3' into pdx86/for-next
Merge tag 'platform-drivers-x86-v6.7-6' into pdx86/for-next:
- Merge tag 'platform-drivers-x86-v6.7-6' into pdx86/for-next
Remove "X86 PLATFORM DRIVERS - ARCH" from MAINTAINERS:
- Remove "X86 PLATFORM DRIVERS - ARCH" from MAINTAINERS
acer-wmi:
- add fan speed monitoring for Predator PHN16-71
- Depend on ACPI_VIDEO instead of selecting it
- Add platform profile and mode key support for Predator PHN16-71
asus-laptop:
- remove redundant braces in if statements
asus-wmi:
- Convert to platform remove callback returning void
clk:
- x86: lpss-atom: Drop unneeded 'extern' in the header
dell-smbios-wmi:
- Stop using WMI chardev
- Use devm_get_free_pages()
hp-bioscfg:
- Removed needless asm-generic
hp-wmi:
- Convert to platform remove callback returning void
intel-uncore-freq:
- Add additional client processors
intel-wmi-sbl-fw-update:
- Use bus-based WMI interface
intel/pmc:
- Call pmc_get_low_power_modes from platform init
ips:
- Remove unused debug code
platform/mellanox:
- mlxbf-tmfifo: Remove unnecessary bool conversion
platform/x86/amd:
- Add support for AMD ACPI based Wifi band RFI mitigation feature
platform/x86/amd/pmc:
- Modify SMU message port for latest AMD platform
- Add 1Ah family series to STB support list
- Add idlemask support for 1Ah family
- call amd_pmc_get_ip_info() during driver probe
- Add VPE information for AMDI000A platform
- Send OS_HINT command for AMDI000A platform
platform/x86/amd/pmf:
- Return a status code only as a constant in two functions
- Return directly after a failed apmf_if_call() in apmf_sbios_heartbeat_notify()
- dump policy binary data
- Add capability to sideload of policy binary
- Add facility to dump TA inputs
- Make source_as_str() as non-static
- Add support to update system state
- Add support update p3t limit
- Add support to get inputs from other subsystems
- change amd_pmf_init_features() call sequence
- Add support for PMF Policy Binary
- Change return type of amd_pmf_set_dram_addr()
- Add support for PMF-TA interaction
- Add PMF TEE interface
platform/x86/dell:
- alienware-wmi: Use kasprintf()
platform/x86/intel-uncore-freq:
- Process read/write blocked feature status
platform/x86/intel/pmc:
- Add missing extern
- Add Lunar Lake M support to intel_pmc_core driver
- Add Arrow Lake S support to intel_pmc_core driver
- Add ssram_init flag in PMC discovery in Meteor Lake
- Move common code to core.c
- Add PSON residency counter for Alder Lake
- Add regmap for Tiger Lake H PCH
- Add PSON residency counter
- Fix in mtl_punit_pmt_init()
- Fix in pmc_core_ssram_get_pmc()
- Show Die C6 counter on Meteor Lake
- Add debug attribute for Die C6 counter
- Read low power mode requirements for MTL-M and MTL-P
- Retrieve LPM information using Intel PMT
- Display LPM requirements for multiple PMCs
- Find and register PMC telemetry entries
- Cleanup SSRAM discovery
- Allow pmc_core_ssram_init to fail
platform/x86/intel/pmc/arl:
- Add GBE LTR ignore during suspend
platform/x86/intel/pmc/lnl:
- Add GBE LTR ignore during suspend
platform/x86/intel/pmc/mtl:
- Use return value from pmc_core_ssram_init()
platform/x86/intel/pmt:
- telemetry: Export API to read telemetry
- Add header to struct intel_pmt_entry
platform/x86/intel/tpmi:
- Move TPMI ID definition
- Modify external interface to get read/write state
- Don't create devices for disabled features
platform/x86/intel/vsec:
- Add support for Lunar Lake M
- Add base address field
- Add intel_vsec_register
- Assign auxdev parent by argument
- Use cleanup.h
- remove platform_info from vsec device structure
- Move structures to header
- Remove unnecessary return
- Fix xa_alloc memory leak
platform/x86/intel/wmi:
- thunderbolt: Use bus-based WMI interface
silicom-platform:
- Fix spelling mistake "platfomr" -> "platform"
wmi:
- linux/wmi.h: fix Excess kernel-doc description warning
- Simplify get_subobj_info()
- Decouple ACPI notify handler from wmi_block_list
- Create WMI bus device first
- Use devres for resource handling
- Remove ACPI handlers after WMI devices
- Remove unused variable in address space handler
- Remove chardev interface
- Remove debug_event module param
- Remove debug_dump_wdg module param
- Add to_wmi_device() helper macro
- Add wmidev_block_set()
x86-android-tablets:
- Fix an IS_ERR() vs NULL check in probe
- Fix backlight ctrl for Lenovo Yoga Tab 3 Pro YT3-X90F
- Add audio codec info for Lenovo Yoga Tab 3 Pro YT3-X90F
- Add support for SPI device instantiation
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmWb29kUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wliAf/bjJw8xGjzKYzipUhhDhM/tPdmuCs
9zXCYXSeioSDCmhQNq6E4R+aBWJvcKAq5tNyf45x6tvWJVY2hk1HVnnJeu7qyVNk
9fA7pGpqsUJg9w9nHW6YLU0AMSSl2a3k/E3lDwhDjYXwZiwQ2Y8atQ702HjiV5US
cZ8/ZblIYqv/WKmhHpBf6dGlGzOUiwnXNIVQDIhXbde7yQPt3gGisftiu6bGyYvA
FuBxm3o0UREX6yHAtII4TQfmcM45BrQa7/7FO3c0ZkpRmGCwiJJjRewUi8Rd2epJ
mP9bNGkGdPriGMdlqcVDMyWvB5XJCaZTlbHHHSyEAaCRTEqeUMKWxp8OMg==
=bmmu
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Intel PMC / PMT / TPMI / uncore-freq / vsec improvements and new
platform support
- AMD PMC / PMF improvements and new platform support
- AMD ACPI based Wifi band RFI mitigation feature (WBRF)
- WMI bus driver cleanups and improvements (Armin Wolf)
- acer-wmi Predator PHN16-71 support
- New Silicom network appliance EC LEDs / GPIOs driver
* tag 'platform-drivers-x86-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (96 commits)
platform/x86/amd/pmc: Modify SMU message port for latest AMD platform
platform/x86/amd/pmc: Add 1Ah family series to STB support list
platform/x86/amd/pmc: Add idlemask support for 1Ah family
platform/x86/amd/pmc: call amd_pmc_get_ip_info() during driver probe
platform/x86/amd/pmc: Add VPE information for AMDI000A platform
platform/x86/amd/pmc: Send OS_HINT command for AMDI000A platform
platform/x86/amd/pmf: Return a status code only as a constant in two functions
platform/x86/amd/pmf: Return directly after a failed apmf_if_call() in apmf_sbios_heartbeat_notify()
platform/x86: wmi: linux/wmi.h: fix Excess kernel-doc description warning
platform/x86/intel/pmc: Add missing extern
platform/x86/intel/pmc/lnl: Add GBE LTR ignore during suspend
platform/x86/intel/pmc/arl: Add GBE LTR ignore during suspend
platform/x86: intel-uncore-freq: Add additional client processors
platform/x86: Remove "X86 PLATFORM DRIVERS - ARCH" from MAINTAINERS
platform/x86: hp-bioscfg: Removed needless asm-generic
platform/x86/intel/pmc: Add Lunar Lake M support to intel_pmc_core driver
platform/x86/intel/pmc: Add Arrow Lake S support to intel_pmc_core driver
platform/x86/intel/pmc: Add ssram_init flag in PMC discovery in Meteor Lake
platform/x86/intel/pmc: Move common code to core.c
platform/x86/intel/pmc: Add PSON residency counter for Alder Lake
...
|
||
|
Linus Torvalds
|
7da71072e1 |
Power management updates for 6.8-rc1
- Add support for the Sierra Forest, Grand Ridge and Meteorlake SoCs to
the intel_idle cpuidle driver (Artem Bityutskiy, Zhang Rui).
- Do not enable interrupts when entering idle in the haltpoll cpuidle
driver (Borislav Petkov).
- Add Emerald Rapids support in no-HWP mode to the intel_pstate cpufreq
driver (Zhenguo Yao).
- Use EPP values programmed by the platform firmware as balanced
performance ones by default in intel_pstate (Srinivas Pandruvada).
- Add a missing function return value check to the SCMI cpufreq driver
to avoid unexpected behavior (Alexandra Diupina).
- Fix parameter type warning in the armada-8k cpufreq driver (Gregory
CLEMENT).
- Rework trans_stat_show() in the devfreq core code to avoid buffer
overflows (Christian Marangi).
- Synchronize devfreq_monitor_[start/stop] so as to prevent a timer
list corruption from occurring when devfreq governors are switched
frequently (Mukesh Ojha).
- Fix possible deadlocks in the core system-wide PM code that occur if
device-handling functions cannot be executed asynchronously during
resume from system-wide suspend (Rafael J. Wysocki).
- Clean up unnecessary local variable initializations in multiple
places in the hibernation code (Wang chaodong, Li zeming).
- Adjust core hibernation code to avoid missing wakeup events that
occur after saving an image to persistent storage (Chris Feng).
- Update hibernation code to enforce correct ordering during image
compression and decompression (Hongchen Zhang).
- Use kmap_local_page() instead of kmap_atomic() in copy_data_page()
during hibernation and restore (Chen Haonan).
- Adjust documentation and code comments to reflect recent tasks freezer
changes (Kevin Hao).
- Repair excess function parameter description warning in the
hibernation image-saving code (Randy Dunlap).
- Fix _set_required_opps when opp is NULL (Bryan O'Donoghue).
- Use device_get_match_data() in the OPP code for TI (Rob Herring).
- Clean up OPP level and other parts and call dev_pm_opp_set_opp()
recursively for required OPPs (Viresh Kumar).
-----BEGIN PGP SIGNATURE-----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=zh4c
-----END PGP SIGNATURE-----
Merge tag 'pm-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for new processors (Sierra Forest, Grand Ridge and
Meteor Lake) to the intel_idle driver, make intel_pstate run on
Emerald Rapids without HWP support and adjust it to utilize EPP values
supplied by the platform firmware, fix issues, clean up code and
improve documentation.
The most significant fix addresses deadlocks in the core system-wide
resume code that occur if async_schedule_dev() attempts to run its
argument function synchronously (for example, due to a memory
allocation failure). It rearranges the code in question which may
increase the system resume time in some cases, but this basically is a
removal of a premature optimization. That optimization will be added
back later, but properly this time.
Specifics:
- Add support for the Sierra Forest, Grand Ridge and Meteorlake SoCs
to the intel_idle cpuidle driver (Artem Bityutskiy, Zhang Rui)
- Do not enable interrupts when entering idle in the haltpoll cpuidle
driver (Borislav Petkov)
- Add Emerald Rapids support in no-HWP mode to the intel_pstate
cpufreq driver (Zhenguo Yao)
- Use EPP values programmed by the platform firmware as balanced
performance ones by default in intel_pstate (Srinivas Pandruvada)
- Add a missing function return value check to the SCMI cpufreq
driver to avoid unexpected behavior (Alexandra Diupina)
- Fix parameter type warning in the armada-8k cpufreq driver (Gregory
CLEMENT)
- Rework trans_stat_show() in the devfreq core code to avoid buffer
overflows (Christian Marangi)
- Synchronize devfreq_monitor_[start/stop] so as to prevent a timer
list corruption from occurring when devfreq governors are switched
frequently (Mukesh Ojha)
- Fix possible deadlocks in the core system-wide PM code that occur
if device-handling functions cannot be executed asynchronously
during resume from system-wide suspend (Rafael J. Wysocki)
- Clean up unnecessary local variable initializations in multiple
places in the hibernation code (Wang chaodong, Li zeming)
- Adjust core hibernation code to avoid missing wakeup events that
occur after saving an image to persistent storage (Chris Feng)
- Update hibernation code to enforce correct ordering during image
compression and decompression (Hongchen Zhang)
- Use kmap_local_page() instead of kmap_atomic() in copy_data_page()
during hibernation and restore (Chen Haonan)
- Adjust documentation and code comments to reflect recent tasks
freezer changes (Kevin Hao)
- Repair excess function parameter description warning in the
hibernation image-saving code (Randy Dunlap)
- Fix _set_required_opps when opp is NULL (Bryan O'Donoghue)
- Use device_get_match_data() in the OPP code for TI (Rob Herring)
- Clean up OPP level and other parts and call dev_pm_opp_set_opp()
recursively for required OPPs (Viresh Kumar)"
* tag 'pm-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
OPP: Rename 'rate_clk_single'
OPP: Pass rounded rate to _set_opp()
OPP: Relocate dev_pm_opp_sync_regulators()
PM: sleep: Fix possible deadlocks in core system-wide PM code
OPP: Move dev_pm_opp_icc_bw to internal opp.h
async: Introduce async_schedule_dev_nocall()
async: Split async_schedule_node_domain()
cpuidle: haltpoll: Do not enable interrupts when entering idle
OPP: Fix _set_required_opps when opp is NULL
OPP: The level field is always of unsigned int type
PM: hibernate: Repair excess function parameter description warning
PM: sleep: Remove obsolete comment from unlock_system_sleep()
cpufreq: intel_pstate: Add Emerald Rapids support in no-HWP mode
Documentation: PM: Adjust freezing-of-tasks.rst to the freezer changes
PM: hibernate: Use kmap_local_page() in copy_data_page()
intel_idle: add Sierra Forest SoC support
intel_idle: add Grand Ridge SoC support
PM / devfreq: Synchronize devfreq_monitor_[start/stop]
cpufreq: armada-8k: Fix parameter type warning
PM: hibernate: Enforce ordering during image compression/decompression
...
|
||
|
Linus Torvalds
|
35f11a3710 |
* MTD
Apart from preventing the mtdblk to run on top of ftl or ubiblk (which
may cause security issues and has no meaning anyway), there are a few
misc fixes.
* Raw NAND
Two meaningful changes this time. The conversion of the brcmnand driver
to the ->exec_op() API, this series brought additional changes to the
core in order to help controller drivers to handle themselves the WP pin
during destructive operations when relevant.
There is also a series bringing important fixes to the sequential read
feature.
As always, there is as well a whole bunch of miscellaneous W=1 fixes,
together with a few runtime fixes (double free, timeout value, OOB
layout, missing register initialization) and the usual load of remove
callbacks turned into void (which led to switch the txx9ndfmc driver to
use module_platform_driver()).
* SPI NOR
SPI NOR comes with die erase support for multi die flashes, with new
octal protocols (1-1-8 and 1-8-8) parsed from SFDP and with an updated
documentation about what the contributors shall consider when proposing
flash additions or updates.
Michael Walle stepped out from the reviewer role to maintainer.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmWFeUsACgkQJWrqGEe9
VoSBzQgAsUDieAMF4zIo5QN6l+8DpDMrkOK1Z5l4B/3goA2ZUz4cs80Kj/53l/kO
tD8Ckn5SA82ZrVZiCJS5D8yplB+4+IWFU9dV/TcoINafLew5R/bBqo4XwgfVgvwy
a4PuFlV9eedDW18cfbZA29TsnKoWdGaWxsyY+Gceukm94VuQbaZIPs3wkmBdWEOM
V+FZaWg7vLW99x2XFDNpBqKFSzjTPAt1W5WM2ASdrb3pSKVOlt02qFlvMFwodVeR
YExYwd1BNNsn9I6lKF/07a5wdX4NygXzqIpYytIaTzeBV3iRgN59uMfWbOh6tHeu
MOEnmWoc3RwsyBXlBTKGafk2DTB6zg==
=gbYM
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"MTD:
- Apart from preventing the mtdblk to run on top of ftl or ubiblk
(which may cause security issues and has no meaning anyway), there
are a few misc fixes.
Raw NAND:
- Two meaningful changes this time. The conversion of the brcmnand
driver to the ->exec_op() API, this series brought additional
changes to the core in order to help controller drivers to handle
themselves the WP pin during destructive operations when relevant.
- There is also a series bringing important fixes to the sequential
read feature.
- As always, there is as well a whole bunch of miscellaneous W=1
fixes, together with a few runtime fixes (double free, timeout
value, OOB layout, missing register initialization) and the usual
load of remove callbacks turned into void (which led to switch the
txx9ndfmc driver to use module_platform_driver()).
SPI NOR:
- SPI NOR comes with die erase support for multi die flashes, with
new octal protocols (1-1-8 and 1-8-8) parsed from SFDP and with an
updated documentation about what the contributors shall consider
when proposing flash additions or updates.
- Michael Walle stepped out from the reviewer role to maintainer"
* tag 'mtd/for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (39 commits)
mtd: rawnand: Clarify conditions to enable continuous reads
mtd: rawnand: Prevent sequential reads with on-die ECC engines
mtd: rawnand: Fix core interference with sequential reads
mtd: rawnand: Prevent crossing LUN boundaries during sequential reads
mtd: Fix gluebi NULL pointer dereference caused by ftl notifier
dt-bindings: mtd: partitions: u-boot: Fix typo
mtd: rawnand: s3c2410: fix Excess struct member description kernel-doc warnings
MAINTAINERS: change my mail to the kernel.org one
mtd: spi-nor: sfdp: get the 1-1-8 and 1-8-8 protocol from SFDP
mtd: spi-nor: drop superfluous debug prints
mtd: spi-nor: sysfs: hide the flash name if not set
mtd: spi-nor: mark the flash name as obsolete
mtd: spi-nor: print flash ID instead of name
mtd: maps: vmu-flash: Fix the (mtd core) switch to ref counters
mtd: ssfdc: Remove an unused variable
mtd: rawnand: diskonchip: fix a potential double free in doc_probe
mtd: rawnand: rockchip: Add missing title to a kernel doc comment
mtd: rawnand: rockchip: Rename a structure
mtd: rawnand: pl353: Fix kernel doc
mtd: spi-nor: micron-st: Add support for mt25qu01g
...
|
||
|
Linus Torvalds
|
fb46e22a9e |
Many singleton patches against the MM code. The patch series which
are included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the
series
"maple_tree: add mt_free_one() and mt_attr() helpers"
"Some cleanups of maple tree"
- In the series "mm: use memmap_on_memory semantics for dax/kmem"
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few
fixes) in the patch series
"Add folio_zero_tail() and folio_fill_tail()"
"Make folio_start_writeback return void"
"Fix fault handler's handling of poisoned tail pages"
"Convert aops->error_remove_page to ->error_remove_folio"
"Finish two folio conversions"
"More swap folio conversions"
- Kefeng Wang has also contributed folio-related work in the series
"mm: cleanup and use more folio in page fault"
- Jim Cromie has improved the kmemleak reporting output in the
series "tweak kmemleak report format".
- In the series "stackdepot: allow evicting stack traces" Andrey
Konovalov to permits clients (in this case KASAN) to cause
eviction of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series "mm:
page_alloc: fixes for high atomic reserve caluculations".
- Dmitry Rokosov has added to the samples/ dorectory some sample
code for a userspace memcg event listener application. See the
series "samples: introduce cgroup events listeners".
- Some mapletree maintanance work from Liam Howlett in the series
"maple_tree: iterator state changes".
- Nhat Pham has improved zswap's approach to writeback in the
series "workload-specific and memory pressure-driven zswap
writeback".
- DAMON/DAMOS feature and maintenance work from SeongJae Park in
the series
"mm/damon: let users feed and tame/auto-tune DAMOS"
"selftests/damon: add Python-written DAMON functionality tests"
"mm/damon: misc updates for 6.8"
- Yosry Ahmed has improved memcg's stats flushing in the series
"mm: memcg: subtree stats flushing and thresholds".
- In the series "Multi-size THP for anonymous memory" Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series "More buffer_head
cleanups".
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
"userfaultfd move option". UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a "KSM Advisor", in the series
"mm/ksm: Add ksm advisor". This is a governor which tunes KSM's
scanning aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory
use in the series "mm/zswap: dstmem reuse optimizations and
cleanups".
- Matthew Wilcox has performed some maintenance work on the
writeback code, both code and within filesystems. The series is
"Clean up the writeback paths".
- Andrey Konovalov has optimized KASAN's handling of alloc and
free stack traces for secondary-level allocators, in the series
"kasan: save mempool stack traces".
- Andrey also performed some KASAN maintenance work in the series
"kasan: assorted clean-ups".
- David Hildenbrand has gone to town on the rmap code. Cleanups,
more pte batching, folio conversions and more. See the series
"mm/rmap: interface overhaul".
- Kinsey Ho has contributed some maintenance work on the MGLRU
code in the series "mm/mglru: Kconfig cleanup".
- Matthew Wilcox has contributed lruvec page accounting code
cleanups in the series "Remove some lruvec page accounting
functions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZyF2wAKCRDdBJ7gKXxA
jjWjAP42LHvGSjp5M+Rs2rKFL0daBQsrlvy6/jCHUequSdWjSgEAmOx7bc5fbF27
Oa8+DxGM9C+fwqZ/7YxU2w/WuUmLPgU=
=0NHs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
||
|
Linus Torvalds
|
aac4de465a |
Performance events changes for v6.8 are:
- Add branch stack counters ABI extension to better capture
the growing amount of information the PMU exposes via
branch stack sampling. There's matching tooling support.
- Fix race when creating the nr_addr_filters sysfs file
- Add Intel Sierra Forest and Grand Ridge intel/cstate
PMU support.
- Add Intel Granite Rapids, Sierra Forest and Grand Ridge
uncore PMU support.
- Misc cleanups & fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2O/5
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
- Add branch stack counters ABI extension to better capture the growing
amount of information the PMU exposes via branch stack sampling.
There's matching tooling support.
- Fix race when creating the nr_addr_filters sysfs file
- Add Intel Sierra Forest and Grand Ridge intel/cstate PMU support
- Add Intel Granite Rapids, Sierra Forest and Grand Ridge uncore PMU
support
- Misc cleanups & fixes
* tag 'perf-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Factor out topology_gidnid_map()
perf/x86/intel/uncore: Fix NULL pointer dereference issue in upi_fill_topology()
perf/x86/amd: Reject branch stack for IBS events
perf/x86/intel/uncore: Support Sierra Forest and Grand Ridge
perf/x86/intel/uncore: Support IIO free-running counters on GNR
perf/x86/intel/uncore: Support Granite Rapids
perf/x86/uncore: Use u64 to replace unsigned for the uncore offsets array
perf/x86/intel/uncore: Generic uncore_get_uncores and MMIO format of SPR
perf: Fix the nr_addr_filters fix
perf/x86/intel/cstate: Add Grand Ridge support
perf/x86/intel/cstate: Add Sierra Forest support
x86/smp: Export symbol cpu_clustergroup_mask()
perf/x86/intel/cstate: Cleanup duplicate attr_groups
perf/core: Fix narrow startup race when creating the perf nr_addr_filters sysfs file
perf/x86/intel: Support branch counters logging
perf/x86/intel: Reorganize attrs and is_visible
perf: Add branch_sample_call_stack
perf/x86: Add PERF_X86_EVENT_NEEDS_BRANCH_STACK flag
perf: Add branch stack counters
|
||
Abhijit Gangurde
|
aeda33ab81 |
cdx: create sysfs bin files for cdx resources
Resource binary file contains the content of the memory regions. These resources<x> devices can be used to mmap the MMIO regions in the user-space. Co-developed-by: Puneet Gupta <puneet.gupta@amd.com> Signed-off-by: Puneet Gupta <puneet.gupta@amd.com> Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com> Link: https://lore.kernel.org/r/20231222064627.2828960-1-abhijit.gangurde@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Lucas Segarra Fernandez
|
eb52707716 |
crypto: qat - add support for ring pair level telemetry
Expose through debugfs ring pair telemetry data for QAT GEN4 devices. This allows to gather metrics about the PCIe channel and device TLB for a selected ring pair. It is possible to monitor maximum 4 ring pairs at the time per device. For details, refer to debugfs-driver-qat_telemetry in Documentation/ABI. This patch is based on earlier work done by Wojciech Ziemba. Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Damian Muszynski <damian.muszynski@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Lucas Segarra Fernandez
|
69e7649f7c |
crypto: qat - add support for device telemetry
Expose through debugfs device telemetry data for QAT GEN4 devices. This allows to gather metrics about the performance and the utilization of a device. In particular, statistics on (1) the utilization of the PCIe channel, (2) address translation, when SVA is enabled and (3) the internal engines for crypto and data compression. If telemetry is supported by the firmware, the driver allocates a DMA region and a circular buffer. When telemetry is enabled, through the `control` attribute in debugfs, the driver sends to the firmware, via the admin interface, the `TL_START` command. This triggers the device to periodically gather telemetry data from hardware registers and write it into the DMA memory region. The device writes into the shared region every second. The driver, every 500ms, snapshots the DMA shared region into the circular buffer. This is then used to compute basic metric (min/max/average) on each counter, every time the `device_data` attribute is queried. Telemetry counters are exposed through debugfs in the folder /sys/kernel/debug/qat_<device>_<BDF>/telemetry. For details, refer to debugfs-driver-qat_telemetry in Documentation/ABI. This patch is based on earlier work done by Wojciech Ziemba. Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Damian Muszynski <damian.muszynski@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Zhiguo Niu
|
c3c2d45b90 |
f2fs: show more discard status by sysfs
The current pending_discard attr just only shows the discard_cmd_cnt information. More discard status can be shown so that we can check them through sysfs when needed. Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Dave Jiang
|
42834b17cf |
cxl: Export sysfs attributes for memory device QoS class
Export qos_class sysfs attributes for the CXL memory device. The QoS clas should show up as /sys/bus/cxl/devices/memX/ram/qos_class for the volatile partition and /sys/bus/cxl/devices/memX/pmem/qos_class for the persistent partition. The QTG ID is retrieved via _DSM after supplying the calculated bandwidth and latency for the entire CXL path from device to the CPU. This ID is used to match up to the root decoder QoS class to determine which CFMWS the memory range of a hotplugged CXL mem device should be assigned under. While there may be multiple DSMAS exported by the device CDAT, the driver will only expose the first QTG ID per partition in sysfs for now. In the future when multiple QTG IDs are necessary, they can be exposed. [1] [1]: https://lore.kernel.org/linux-cxl/167571650007.587790.10040913293130712882.stgit@djiang5-mobl3.local/T/#md2a47b1ead3e1ba08f50eab29a4af1aed1d215ab Suggested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/170319625698.2212653.17544381274847420961.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Arnd Bergmann
|
3408005e30 |
OP-TEE cleanup
- Remove a redundant custom workqueue in the OP-TEE driver. - Fix a missing description of an argument to optee_handle_rpc(). -----BEGIN PGP SIGNATURE----- iQJOBAABCgA4FiEEFV+gSSXZJY9ZyuB5LinzTIcAHJcFAmV6/wIaHGplbnMud2lr bGFuZGVyQGxpbmFyby5vcmcACgkQLinzTIcAHJezhg//alxgaOOJABnzWxBwEUc6 /gAEmt5qOt68JyeMN2f/I5XARlrmFM93QIOM7KLFNpQ1GoMxLm8kEgz6glUSfi1Z lncCD7F+egn3ix4bwvbhMMmhVE4doyg+aof4m5628mFTj7MIesFGjAgffhAP+Cla R5clf/JDohl5NKgISwZjKIIK+QtT61hzy8TvPtiPkrMcLB2G03yhv6X5M5Lkz73V m4JRlMbs/RBoKwlEgFJYTC4PTQboKLlUZ0gyfTHTTR5LQpq2aR4SMRLQcc/uMphn 1o4falN7zcCar0Is8AD92ja0Uy2J4HyC52u8nvkhIZVbnU9eP5P/vR053CwIfJMj WGogOdAFTbunp/fvjImuUbxfyOjHKfOoMGpzYCS3DiNusP8mmHyw+SctPGGFWkqQ Rd8qz11e/FmD1vq0e0Xm4TAXDWitbJDTCi/noN8X59ShXPIFsRBf6ooeNwbtwHgV fNiU8x5r0QjuV7iuEIVvBokMg883zb6njPEwiez5axblkYthxtXfgPi8cNtiA347 8s/NFtuxMiyK74TE+Wfkb+iURC/MpHDelTOXyYT3D9ZGIGF5x6rS6nOgs0+gEZ5J 19S6pPxvNs6UaDSlDta60qzGOB9WqULkI2QGDwqZ1M5PX49q+z/aM3m/Lim7FiUD Ee3FJpbSXyKNeKOX+per0Qg= =wAS6 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmWFdOYACgkQYKtH/8kJ UicH7RAApoSj4P686Hbjph7hFISEkICUHjnQ+gk2piQ6PRXTsaBuleI/8qtbk1Fd Qv6viRmslinxrd/ghovamjlv10W/IdCv+gC7Pjg3IHWiIW379H0aVKAiT//vFQQX +ioMjcVdFnoKZuimsrsmWPGKEE/DMVTArIK6vFIS6JSOBnZiIEtMYEecV2As2icx JjaLEBJQjW91PCjsN07jnkvKu/JepuVM6sZBrdf99i8HTtjVK6CpsaxEEBwPPq/r TpS8MekJwvszbng0P5zXUIrqEslEXwJO4bkJSptcvPKGN+Whn559ItL9fMo0lQU0 d7FWzyxlKZUKU5MpUr3ZET4ukovLYzTdOnux/4qpB/Y7cQWusI1EkLvMmStoFJG5 SYJH4OwpKLLZ3Mgvqgy1Rmjrp5NkWpCKrLu2PMZ948ag8zc5g/KFJitLK0AyT1ut havT0GTQRyl1w/7Tw6z9aCepUU9gyWfjHxV6Ej6izK656fD6O+TLgk2y5Zsrx9RY Slu3UA8DijXRpp95JBmoxxLh0hxxt+8DryU9RRADa8v//6lkJ0Gr8QzO4SVmDNr/ fl0he2CmyOyd3QEV+AG2/eobVSr4/Ka0nZEiu++zr7uar68uQgsi3i5XwjcTR5SX 4VtdTjeL/Orhdr6aRqtTIO56kI6jaRG5YHmpq4A3xQJUqncnMO4= =Ae+Z -----END PGP SIGNATURE----- Merge tag 'optee-cleanup-for-v6.8' of https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers OP-TEE cleanup - Remove a redundant custom workqueue in the OP-TEE driver. - Fix a missing description of an argument to optee_handle_rpc(). * tag 'optee-cleanup-for-v6.8' of https://git.linaro.org/people/jens.wiklander/linux-tee: optee: add missing description of RPC argument reference tee: optee: Remove redundant custom workqueue tee: optee: Fix supplicant based device enumeration Link: https://lore.kernel.org/r/20231214132237.GA3092763@rayden Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Dave Airlie
|
92242716ee |
This tag contains habanalabs driver changes for v6.8.
The notable changes are:
- uAPI changes:
- Add sysfs entry to allow users to identify a device minor id with its
debugfs path
- Add sysfs entry to expose the device's module id as given to us from
the f/w
- Add signed device information retrieval through the INFO ioctl
- New features and improvements:
- Update documentation of debugfs paths
- Add support for Gaudi2C device (new PCI revision number)
- Add pcie reset prepare/done hooks
- Firmware related fixes and changes:
- Print three instances version numbers of Infineon second stage
- Assume hard-reset is done by f/w upon PCIe AXI drain
- Bug fixes and code cleanups:
- Fix information leak in sec_attest_info()
- Avoid overriding existing undefined opcode data in Gaudi2
- Multiple Queue Manager (QMAN) fixes for Gaudi2
- Set hard reset flag if graceful reset is skipped
- Remove 'get temperature' debug print
- Fix the new Event Queue heartbeat mechanism
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmWBaF8ACgkQZR1NuKta
54ATiAf/flp2gakFbG18e/IAyroSE1c6ZEV07l9vuYF8VCSuC77YVKdkU+QwwwQt
h09gj46zsS/NX4QnBkUyZPnqsR/QoW2XpMABT89JuohCwDM7BNo2MUCRAFiNrH32
T3DjgJuLdk4cuohy7aD1mT0I/BsoCIQzJlojdOH7y3K2eNJD82wNVVjmjA1cfyVk
vKgZXT96o6mgPIA4cNcHjuYd5H9dE8z1vatq6a1JwVZM4FDWXLV1IxKJFOXTRUs9
30v0cNATkHbWMWI2N5bX+AK/GOuWvKaW8+NMmIjXaaHWS88tFFn2MKbAvxIChENd
w1ondDyZqxjAXFvLaJhpKcTG2m3BxA==
=YhxU
-----END PGP SIGNATURE-----
Merge tag 'drm-habanalabs-next-2023-12-19' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver changes for v6.8.
The notable changes are:
- uAPI changes:
- Add sysfs entry to allow users to identify a device minor id with its
debugfs path
- Add sysfs entry to expose the device's module id as given to us from
the f/w
- Add signed device information retrieval through the INFO ioctl
- New features and improvements:
- Update documentation of debugfs paths
- Add support for Gaudi2C device (new PCI revision number)
- Add pcie reset prepare/done hooks
- Firmware related fixes and changes:
- Print three instances version numbers of Infineon second stage
- Assume hard-reset is done by f/w upon PCIe AXI drain
- Bug fixes and code cleanups:
- Fix information leak in sec_attest_info()
- Avoid overriding existing undefined opcode data in Gaudi2
- Multiple Queue Manager (QMAN) fixes for Gaudi2
- Set hard reset flag if graceful reset is skipped
- Remove 'get temperature' debug print
- Fix the new Event Queue heartbeat mechanism
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZYFpihZscr/fsRRd@ogabbay-vm-u22.habana-labs.com
|
||
|
Dave Airlie
|
d219702902 |
Introduce a new DRM driver for Intel GPUs
Xe, is a new driver for Intel GPUs that supports both integrated and discrete platforms. The experimental support starts with Tiger Lake. i915 will continue be the main production driver for the platforms up to Meteor Lake and Alchemist. Then the goal is to make this Intel Xe driver the primary driver for Lunar Lake and newer platforms. It uses most, if not all, of the key drm concepts, in special: TTM, drm-scheduler, drm-exec, drm-gpuvm/gpuva and others. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmWErlkACgkQ+mJfZA7r E8ptAQf/UILUy63usqMBQx5gGTJ5e6oyGy0r97JdBBWNxhcu3/4uN1SR6V2LSV7p mnZt/LrHZ/24s73e5D7sh909GCYm/MMWH7v0KypJq5Z74BHb9IePP7+Q4NTfXfqS 5AotYxDEwPBQZpfYLA7y17XrB01yz/gF8wHytBFTPiPOlve7BDAYw4j8o+ocztxy sLLwPi7A6RJJlpXaDa33DpH5MLpTVYUOuxaIElqu949AJj/Me+LHd26VfoGWt9YT AWzAm+LLoBhyE5lk9swWxvphGvNoOuKf8soTMEVXr4qxsR6d4LShkrljSYSbtRhl 2QZMgvSL4pGkB3Yvfxb0hidWuVMNfA== =bubx -----END PGP SIGNATURE----- Merge tag 'drm-xe-next-2023-12-21-pr1-1' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next Introduce a new DRM driver for Intel GPUs Xe, is a new driver for Intel GPUs that supports both integrated and discrete platforms. The experimental support starts with Tiger Lake. i915 will continue be the main production driver for the platforms up to Meteor Lake and Alchemist. Then the goal is to make this Intel Xe driver the primary driver for Lunar Lake and newer platforms. It uses most, if not all, of the key drm concepts, in special: TTM, drm-scheduler, drm-exec, drm-gpuvm/gpuva and others. Signed-off-by: Dave Airlie <airlied@redhat.com> [airlied: add an extra X86 check, fix a typo, fix drm_exec_init interface change]. From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZYSwLgXZUZ57qGPQ@intel.com |
||
|
Badal Nilawar
|
4446fcf220 |
drm/xe/hwmon: Expose power1_max_interval
Expose power1_max_interval, that is the tau corresponding to PL1, as a custom hwmon attribute. Some bit manipulation is needed because of the format of PKG_PWR_LIM_1_TIME in PACKAGE_RAPL_LIMIT register (1.x * power(2,y)) v2: Get rpm wake ref while accessing power1_max_interval v3: %s/hwmon/xe_hwmon/ v4: - As power1_max_interval is rw attr take lock in read function as well - Refine comment about val to fix point conversion (Andi) - Update kernel version and date in doc v5: Fix review comments (Anshuman) Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231030115618.1382200-4-badal.nilawar@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> |
||
|
Badal Nilawar
|
71d0a32524 |
drm/xe/hwmon: Expose hwmon energy attribute
Expose hwmon energy attribute to show device level energy usage v2: - %s/hwm_/hwmon_/ - Convert enums to upper case v3: - %s/hwmon_/xe_hwmon - Remove gt specific hwmon attributes v4: - %s/REG_PKG_ENERGY_STATUS/REG_ENERGY_STATUS_ALL (Riana) - %s/hwmon_energy_info/xe_hwmon_energy_info (Riana) Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Riana Tauro <riana.tauro@intel.com> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/20230925081842.3566834-5-badal.nilawar@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> |
||
|
Badal Nilawar
|
fbcdc9d3bf |
drm/xe/hwmon: Expose input voltage attribute
Use Xe HWMON subsystem to display the input voltage. v2: - Rename hwm_get_vltg to hwm_get_voltage (Riana) - Use scale factor SF_VOLTAGE (Riana) v3: - %s/gt_perf_status/REG_GT_PERF_STATUS/ - Remove platform check from hwmon_get_voltage() v4: - Fix review comments (Andi) Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Riana Tauro <riana.tauro@intel.com> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/20230925081842.3566834-4-badal.nilawar@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> |
||
|
Badal Nilawar
|
92d44a422d |
drm/xe/hwmon: Expose card reactive critical power
Expose the card reactive critical (I1) power. I1 is exposed as power1_crit in microwatts (typically for client products) or as curr1_crit in milliamperes (typically for server). v2: Move PCODE_MBOX macro to pcode file (Riana) v3: s/IS_DG2/(gt_to_xe(gt)->info.platform == XE_DG2) v4: Fix review comments (Andi) Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Riana Tauro <riana.tauro@intel.com> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/20230925081842.3566834-3-badal.nilawar@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> |
||
|
Badal Nilawar
|
fb1b70607f |
drm/xe/hwmon: Expose power attributes
Expose Card reactive sustained (pl1) power limit as power_max and card default power limit (tdp) as power_rated_max. v2: - Fix review comments (Riana) v3: - Use drmm_mutex_init (Matt Brost) - Print error value (Matt Brost) - Convert enums to uppercase (Matt Brost) - Avoid extra reg read in hwmon_is_visible function (Riana) - Use xe_device_assert_mem_access when applicable (Matt Brost) - Add intel-xe@lists.freedesktop.org in Documentation (Matt Brost) v4: - Use prefix xe_hwmon prefix for all functions (Matt Brost/Andi) - %s/hwmon_reg/xe_hwmon_reg (Andi) - Fix review comments (Guenter/Andi) v5: - Fix review comments (Riana) v6: - Use drm_warn in default case (Rodrigo) - s/ENODEV/EOPNOTSUPP (Andi) Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Riana Tauro <riana.tauro@intel.com> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/20230925081842.3566834-2-badal.nilawar@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> |
||
Rafael J. Wysocki
|
bfd7b2d95e |
Update devfreq next for v6.8
Detailed description for this pull request:
1. Fix buffer overflow of trans_stat_show sysfs node on devfreq core
- Fix buffer overflow of trans_stat_show sysfs node to replace
sprintf with scnprintf and then replace it with sysfs_emit
according to the syfs guide.
2. Fix the timer list corruption when frequent switching of governor
by synchronizing the devfreq_moniotr_start and _stop function.
-----BEGIN PGP SIGNATURE-----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=Y7tv
-----END PGP SIGNATURE-----
Merge tag 'devfreq-next-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux into pm-devfreq
Merge devfreq updates for v6.8 from Chanwoo Choi:
"1. Fix buffer overflow of trans_stat_show sysfs node on devfreq core
- Fix buffer overflow of trans_stat_show sysfs node to replace
sprintf with scnprintf and then replace it with sysfs_emit
according to the syfs guide.
2. Fix the timer list corruption when frequent switching of governor
by synchronizing the devfreq_moniotr_start and _stop function."
* tag 'devfreq-next-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: Synchronize devfreq_monitor_[start/stop]
PM / devfreq: Convert to use sysfs_emit_at() API
PM / devfreq: Fix buffer overflow in trans_stat_show
|
||
Greg Kroah-Hartman
|
7050abeb8f |
1st set of IIO new device support, features and cleanup for 6.8
New device support
------------------
adi,hmc425a
* Add support for ADRF5740 attenuators. Minor changes to driver needed
alongside new IDs.
aosong,ags02ma
* New driver for this volatile organic compounds sensor.
bosch,bmp280
* Add BMP390 (small amount of refactoring + ID)
bosch,bmi323
* New driver to support the BMI323 6-axis IMU.
honeywell,hsc030pa
* New driver supporting a huge number of SSC and HSC series pressure and
temperature sensors.
isil,isl76682
* New driver for this simple Ambient Light sensor.
liteon,ltr390
* New driver for this ambient and ultraviolet light sensor.
maxim,max34408
* New driver to support the MAX34408 and MAX34409 current monitoring ADCs.
melexis,mlx90635
* New driver for this Infrared contactless temperature sensor.
mirochip,mcp9600
* New driver for this thermocouple EMF convertor.
ti,hdc3020
* New driver for this integrated relative humidity and temperature
sensor.
vishay,veml6075
* New driver for this UVA and UVB light sensor.
General features
----------------
Device properties
* Add fwnode_property_match_property_string() helper to allow matching
single value property against an array of predefined strings.
* Use fwnode_property_string_array_count() inside
fwnode_property_match_string() instead of open coding the same.
checkpatch.pl
* Add exclusion of __aligned() from a warning reducing false positives
on IIO drivers (and hopefully beyond)
IIO Features
------------
core
* New light channel modifiers for UVA and UVB.
* Add IIO_CHAN_INFO_TROUGH as counterpart to IIO_CHAN_INFO_PEAK so that
we can support device that keep running track of the lowest value they
have seen in similar fashion to the existing peak tracking.
adi,adis library
* Use spi cs inactive delay even when a burst reading is performed.
As it's now used every time, can centralize the handling in the SPI
setup code in the driver.
adi,ad2s1210
* Support for fixed-mode to this resolver driver where the A0 and A1
pins are hard wired to config mode in which case position and config
must be read from appropriate config registers.
* Support reset GPIO if present.
adi,ad5791
* Allow configuration of presence of external amplifier in DT binding.
adi,adis16400
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
adi,adis16475
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
bosch,bmp280
* Enable multiple chip IDs per family of devices.
rohm,bu27008
* Add an illuminance channel calculated from RGB and IR data.
Cleanup
-------
Minor white space, typos and tidy up not explicitly called out.
Core
* Check that the available_scan_masks array passed to the IIO core
by a driver is sensible by ensuring the entries are ordered so the
minimum number of channels is enabled in the earlier entries (as they
will be selected if sufficient for the requested channels).
* Document that the available_scan_masks infrastructure doesn't currently
handle masks that don't fit in a long int.
* Improve intensity documentation to reflect that there is no expectation
of sensible units (it's dependent on a frequency sensitivity curve)
Various
* Use new device_property_match_property_string() to replace open coded
versions of the same thing.
* Fix a few MAINTAINERS filenames.
* i2c_get_match_data() and spi_get_device_match_data() pushed into
more drivers reducing boilerplate handling.
* Some unnecessary headers removed.
* ACPI_PTR() removals. It's rarely worth using this.
adi,ad7091r (early part of a series adding device support - useful in
their own right)
* Pass iio_dev directly an event handler rather than relying
on broken use of dev_get_drvdata() as drvdata is never set in this driver.
* Make sure alert is turned on.
adi,ad9467 (general driver fixing up as precursor to iio-backend proposal
which is under review for 6.9)
* Fix reset gpio handling to match expected polarity.
* Always handle error codes from spi_writes.
* Add a driver instance local mutex to avoid some races.
* Fix scale setting to align with available scale values.
* Split array of chip_info structures up into named individual elements.
* Convert to regmap.
honeywell,mprls0025pa
* Drop now unnecessary type references in DT binding for properties in
pascals.
invensense,mpu6050
* Don't eat a potentially useful return value from regmap_bulk_write()
invensense,icm42600
* Use max macro to improve code readability and save a few lines.
liteon,ltrf216a
* Improve prevision of light intensity.
microchip,mcp3911
* Use cleanup.h magic.
qcom,spmi*
* Fix wrong descriptions of SPMI reg fields in bindings.
Other
----
mailmap
* Update for Matt Ranostay
-----BEGIN PGP SIGNATURE-----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=jH+G
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 6.8
New device support
------------------
adi,hmc425a
* Add support for ADRF5740 attenuators. Minor changes to driver needed
alongside new IDs.
aosong,ags02ma
* New driver for this volatile organic compounds sensor.
bosch,bmp280
* Add BMP390 (small amount of refactoring + ID)
bosch,bmi323
* New driver to support the BMI323 6-axis IMU.
honeywell,hsc030pa
* New driver supporting a huge number of SSC and HSC series pressure and
temperature sensors.
isil,isl76682
* New driver for this simple Ambient Light sensor.
liteon,ltr390
* New driver for this ambient and ultraviolet light sensor.
maxim,max34408
* New driver to support the MAX34408 and MAX34409 current monitoring ADCs.
melexis,mlx90635
* New driver for this Infrared contactless temperature sensor.
mirochip,mcp9600
* New driver for this thermocouple EMF convertor.
ti,hdc3020
* New driver for this integrated relative humidity and temperature
sensor.
vishay,veml6075
* New driver for this UVA and UVB light sensor.
General features
----------------
Device properties
* Add fwnode_property_match_property_string() helper to allow matching
single value property against an array of predefined strings.
* Use fwnode_property_string_array_count() inside
fwnode_property_match_string() instead of open coding the same.
checkpatch.pl
* Add exclusion of __aligned() from a warning reducing false positives
on IIO drivers (and hopefully beyond)
IIO Features
------------
core
* New light channel modifiers for UVA and UVB.
* Add IIO_CHAN_INFO_TROUGH as counterpart to IIO_CHAN_INFO_PEAK so that
we can support device that keep running track of the lowest value they
have seen in similar fashion to the existing peak tracking.
adi,adis library
* Use spi cs inactive delay even when a burst reading is performed.
As it's now used every time, can centralize the handling in the SPI
setup code in the driver.
adi,ad2s1210
* Support for fixed-mode to this resolver driver where the A0 and A1
pins are hard wired to config mode in which case position and config
must be read from appropriate config registers.
* Support reset GPIO if present.
adi,ad5791
* Allow configuration of presence of external amplifier in DT binding.
adi,adis16400
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
adi,adis16475
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
bosch,bmp280
* Enable multiple chip IDs per family of devices.
rohm,bu27008
* Add an illuminance channel calculated from RGB and IR data.
Cleanup
-------
Minor white space, typos and tidy up not explicitly called out.
Core
* Check that the available_scan_masks array passed to the IIO core
by a driver is sensible by ensuring the entries are ordered so the
minimum number of channels is enabled in the earlier entries (as they
will be selected if sufficient for the requested channels).
* Document that the available_scan_masks infrastructure doesn't currently
handle masks that don't fit in a long int.
* Improve intensity documentation to reflect that there is no expectation
of sensible units (it's dependent on a frequency sensitivity curve)
Various
* Use new device_property_match_property_string() to replace open coded
versions of the same thing.
* Fix a few MAINTAINERS filenames.
* i2c_get_match_data() and spi_get_device_match_data() pushed into
more drivers reducing boilerplate handling.
* Some unnecessary headers removed.
* ACPI_PTR() removals. It's rarely worth using this.
adi,ad7091r (early part of a series adding device support - useful in
their own right)
* Pass iio_dev directly an event handler rather than relying
on broken use of dev_get_drvdata() as drvdata is never set in this driver.
* Make sure alert is turned on.
adi,ad9467 (general driver fixing up as precursor to iio-backend proposal
which is under review for 6.9)
* Fix reset gpio handling to match expected polarity.
* Always handle error codes from spi_writes.
* Add a driver instance local mutex to avoid some races.
* Fix scale setting to align with available scale values.
* Split array of chip_info structures up into named individual elements.
* Convert to regmap.
honeywell,mprls0025pa
* Drop now unnecessary type references in DT binding for properties in
pascals.
invensense,mpu6050
* Don't eat a potentially useful return value from regmap_bulk_write()
invensense,icm42600
* Use max macro to improve code readability and save a few lines.
liteon,ltrf216a
* Improve prevision of light intensity.
microchip,mcp3911
* Use cleanup.h magic.
qcom,spmi*
* Fix wrong descriptions of SPMI reg fields in bindings.
Other
----
mailmap
* Update for Matt Ranostay
* tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (83 commits)
iio: adc: ad7091r: Align arguments to function call parenthesis
iio: adc: ad7091r: Set alert bit in config register
iio: adc: ad7091r: Pass iio_dev to event handler
scripts: checkpatch: Add __aligned to the list of attribute notes
iio: chemical: add support for Aosong AGS02MA
dt-bindings: iio: chemical: add aosong,ags02ma
dt-bindings: vendor-prefixes: add aosong
iio: accel: bmi088: update comments and Kconfig
dt-bindings: iio: humidity: Add TI HDC302x support
iio: humidity: Add driver for ti HDC302x humidity sensors
iio: ABI: document temperature and humidity peak/trough raw attributes
iio: core: introduce trough info element for minimum values
iio: light: driver for Lite-On ltr390
dt-bindings: iio: light: add ltr390
iio: light: isl76682: remove unreachable code
iio: pressure: driver for Honeywell HSC/SSC series
dt-bindings: iio: pressure: add honeywell,hsc030
doc: iio: Document intensity scale as poorly defined
dt-bindings: iio: temperature: add MLX90635 device
iio: temperature: mlx90635 MLX90635 IR Temperature sensor
...
|
||
Tomer Tayar
|
aa5cea38ce |
accel/habanalabs: add parent_device sysfs attribute
The device debugfs directory was modified to be named as the device-name. This name is the parent device name, i.e. either the PCI address in case of an ASIC, or the simulator device name in case of a simulator. This change makes it more difficult for a user to access the debugfs directory for a specific accel device, because he can't just use the accel minor id, but he needs to do more device-dependent operations to get the device name. To make it easier to get this name, add a 'parent_device' sysfs attribute that the user can read using the minor id before accessing debugfs. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> |
||
|
Tomer Tayar
|
cf0719a8a3 |
accel/habanalabs: update debugfs-driver-habanalabs with the device-name directory
The device debugfs directory was modified to be named as the parent device name. Update the paths accordingly. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> |
||
Dani Liberman
|
47a552863d |
accel/habanalabs: expose module id through sysfs
Module ID exposes the physical location of the device in the server, from the pov of the devices in regard to how they are connected by internal fabric. This information is already exposed in our INFO ioctl, but there are utilities and scripts running in data-center which are already accessing sysfs for topology information and it is easier for them to continue getting that information from sysfs instead of opening a file descriptor. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> |
||
JaimeLiao
|
fc2efaf90a
|
mtd: spi-nor: sysfs: hide the flash name if not set
The flash name is not reliable as we saw flash ID collisions. Hide the flash name if not set. Signed-off-by: JaimeLiao <jaimeliao@mxic.com.tw> Reviewed-by: Michael Walle <michael@walle.cc> [ta: update commit subject and description and the sysfs description] Link: https://lore.kernel.org/r/20231215082138.16063-4-tudor.ambarus@linaro.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> |
||
Alexander Graf
|
2678fd2fe9 |
initramfs: Expose retained initrd as sysfs file
When the kernel command line option "retain_initrd" is set, we do not free the initrd memory. However, we also don't expose it to anyone for consumption. That leaves us in a weird situation where the only user of this feature is ppc64 and arm64 specific kexec tooling. To make it more generally useful, this patch adds a kobject to the firmware object that contains the initrd context when "retain_initrd" is set. That way, we can access the initrd any time after boot from user space and for example hand it into kexec as --initrd parameter if we want to reboot the same initrd. Or inspect it directly locally. With this patch applied, there is a new /sys/firmware/initrd file when the kernel was booted with an initrd and "retain_initrd" command line option is set. Signed-off-by: Alexander Graf <graf@amazon.com> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20231207235654.16622-1-graf@amazon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Miquel Raynal
|
192048e5a5 |
ABI: sysfs-nvmem-cells: Expose cells through sysfs
The binary content of nvmem devices is available to the user so in the easiest cases, finding the content of a cell is rather easy as it is just a matter of looking at a known and fixed offset. However, nvmem layouts have been recently introduced to cope with more advanced situations, where the offset and size of the cells is not known in advance or is dynamic. When using layouts, more advanced parsers are used by the kernel in order to give direct access to the content of each cell regardless of their position/size in the underlying device, but these information were not accessible to the user. By exposing the nvmem cells to the user through a dedicated cell/ folder containing one file per cell, we provide a straightforward access to useful user information without the need for re-writing a userland parser. Content of nvmem cells is usually: product names, manufacturing date, MAC addresses, etc, Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231215111536.316972-8-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Martin K. Petersen
|
6df14a32e9 |
Merge patch series "Add UFS RTC support"
Bean Huo <beanhuo@iokpp.de> says: Adding RTC support for embedded storage device UFS in its driver, it is important for a few key reasons: 1. Helps with Regular Maintenance: The RTC provides a basic way to keep track of time, making it useful for scheduling routine maintenance tasks in the storage device. This includes things like making sure data is spread evenly across the storage to extend its life. 2. Figuring Out How Old Data Is: The RTC helps the device estimate how long ago certain parts of the storage were last used. This is handy for deciding when to do maintenance tasks to keep the storage working well over time. 3. Making Devices Last Longer: By using the RTC for regular upkeep, we can make sure the storage device lasts longer and stays reliable. This is especially important for devices that need to work well for a long time. 4.Fitting In with Other Devices: The inclusion of RTC support aligns with existing UFS specifications (starting from UFS Spec 2.0) and is consistent with the prevalent industry practice. Many UFS devices currently on the market utilize RTC for internal timekeeping. By ensuring compatibility with this widely adopted standard, the embedded storage device becomes seamlessly integrable with existing hardware and software ecosystems, reducing the risk of compatibility issues. In short, adding RTC support to embedded storage device UFS helps with regular upkeep, extends the device's life, ensures compatibility, and keeps everything running smoothly with the rest of the system. Link: https://lore.kernel.org/r/20231212220825.85255-1-beanhuo@iokpp.de Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |