Recent work moving the reporting of Rx software timestamps to the core
[1] highlighted an issue where hardware time stamping was advertised
for the platforms where it is not supported.
Fix this by covering advertising support for hardware timestamps only if
the hardware supports it. Due to the Tx implementation in RAVB software
Tx timestamping is also only considered if the hardware supports
hardware timestamps. This should be addressed in future, but this fix
only reflects what the driver currently implements.
1. Commit 277901ee3a ("ravb: Remove setting of RX software timestamp")
Fixes: 7e09a052dc ("ravb: Exclude gPTP feature support for RZ/G2L")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Tested-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://patch.msgid.link/20241014124343.3875285-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If:
1) the user requested USO, but
2) there is not enough payload for GSO to kick in, and
3) the egress device doesn't offer checksum offload, then
we want to compute the L4 checksum in software early on.
In the case when we are not taking the GSO path, but it has been requested,
the software checksum fallback in skb_segment doesn't get a chance to
compute the full checksum, if the egress device can't do it. As a result we
end up sending UDP datagrams with only a partial checksum filled in, which
the peer will discard.
Fixes: 10154dbded ("udp: Allow GSO transmit from devices with no checksum offload")
Reported-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20241011-uso-swcsum-fixup-v2-1-6e1ddc199af9@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to the Marvell datasheet the 88E6361 has two VTU pages
(4k VIDs per page) so the max_vid should be 8191, not 4095.
In the current implementation mv88e6xxx_vtu_walk() gives unexpected
results because of this error. I verified that mv88e6xxx_vtu_walk()
works correctly on the MV88E6361 with this patch in place.
Fixes: 12899f2998 ("net: dsa: mv88e6xxx: enable support for 88E6361 switch")
Signed-off-by: Peter Rashleigh <peter@rashleigh.ca>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241014204342.5852-1-peter@rashleigh.ca
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin KaFai Lau reported use-after-free [0] in reqsk_timer_handler().
"""
We are seeing a use-after-free from a bpf prog attached to
trace_tcp_retransmit_synack. The program passes the req->sk to the
bpf_sk_storage_get_tracing kernel helper which does check for null
before using it.
"""
The commit 83fccfc394 ("inet: fix potential deadlock in
reqsk_queue_unlink()") added timer_pending() in reqsk_queue_unlink() not
to call del_timer_sync() from reqsk_timer_handler(), but it introduced a
small race window.
Before the timer is called, expire_timers() calls detach_timer(timer, true)
to clear timer->entry.pprev and marks it as not pending.
If reqsk_queue_unlink() checks timer_pending() just after expire_timers()
calls detach_timer(), TCP will miss del_timer_sync(); the reqsk timer will
continue running and send multiple SYN+ACKs until it expires.
The reported UAF could happen if req->sk is close()d earlier than the timer
expiration, which is 63s by default.
The scenario would be
1. inet_csk_complete_hashdance() calls inet_csk_reqsk_queue_drop(),
but del_timer_sync() is missed
2. reqsk timer is executed and scheduled again
3. req->sk is accept()ed and reqsk_put() decrements rsk_refcnt, but
reqsk timer still has another one, and inet_csk_accept() does not
clear req->sk for non-TFO sockets
4. sk is close()d
5. reqsk timer is executed again, and BPF touches req->sk
Let's not use timer_pending() by passing the caller context to
__inet_csk_reqsk_queue_drop().
Note that reqsk timer is pinned, so the issue does not happen in most
use cases. [1]
[0]
BUG: KFENCE: use-after-free read in bpf_sk_storage_get_tracing+0x2e/0x1b0
Use-after-free read at 0x00000000a891fb3a (in kfence-#1):
bpf_sk_storage_get_tracing+0x2e/0x1b0
bpf_prog_5ea3e95db6da0438_tcp_retransmit_synack+0x1d20/0x1dda
bpf_trace_run2+0x4c/0xc0
tcp_rtx_synack+0xf9/0x100
reqsk_timer_handler+0xda/0x3d0
run_timer_softirq+0x292/0x8a0
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
intel_idle_irq+0x5a/0xa0
cpuidle_enter_state+0x94/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
kfence-#1: 0x00000000a72cc7b6-0x00000000d97616d9, size=2376, cache=TCPv6
allocated by task 0 on cpu 9 at 260507.901592s:
sk_prot_alloc+0x35/0x140
sk_clone_lock+0x1f/0x3f0
inet_csk_clone_lock+0x15/0x160
tcp_create_openreq_child+0x1f/0x410
tcp_v6_syn_recv_sock+0x1da/0x700
tcp_check_req+0x1fb/0x510
tcp_v6_rcv+0x98b/0x1420
ipv6_list_rcv+0x2258/0x26e0
napi_complete_done+0x5b1/0x2990
mlx5e_napi_poll+0x2ae/0x8d0
net_rx_action+0x13e/0x590
irq_exit_rcu+0xf5/0x320
common_interrupt+0x80/0x90
asm_common_interrupt+0x22/0x40
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
freed by task 0 on cpu 9 at 260507.927527s:
rcu_core_si+0x4ff/0xf10
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
Fixes: 83fccfc394 ("inet: fix potential deadlock in reqsk_queue_unlink()")
Reported-by: Martin KaFai Lau <martin.lau@kernel.org>
Closes: https://lore.kernel.org/netdev/eb6684d0-ffd9-4bdc-9196-33f690c25824@linux.dev/
Link: https://lore.kernel.org/netdev/b55e2ca0-42f2-4b7c-b445-6ffd87ca74a0@linux.dev/ [1]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241014223312.4254-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CP_SMMU_TABLE_UPDATE _should_ be waiting for idle, but on some
devices (x1-85, possibly others), it seems to pass that barrier while
there are still things in the event completion FIFO waiting to be
written back to memory.
Work around that by adding a fence wait before context switch. The
CP_EVENT_WRITE that writes the fence is the last write from a submit,
so seeing this value hit memory is a reliable indication that it is
safe to proceed with the context switch.
v2: Only emit CP_WAIT_TIMESTAMP on a7xx, as it is not supported on a6xx.
Conversely, I've not been able to reproduce this issue on a6xx, so
hopefully it is limited to a7xx, or perhaps just certain a7xx
devices.
Fixes: af66706acc ("drm/msm/a6xx: Add skeleton A7xx support")
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/63
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
The bcmasp_xmit() returns NETDEV_TX_OK without freeing skb
in case of mapping fails, add dev_kfree_skb() to fix it.
Fixes: 490cb41200 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20241014145901.48940-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Don't set the merge_3d pending flush bits if the mode_3d is
BLEND_3D_NONE.
Always flushing merge_3d can cause timeout issues when there are
multiple commits with concurrent writeback enabled.
This is because the video phys enc waits for the hw_ctl flush register
to be completely cleared [1] in its wait_for_commit_done(), but the WB
encoder always sets the merge_3d pending flush during each commit
regardless of if the merge_3d is actually active.
This means that the hw_ctl flush register will never be 0 when there are
multiple CWB commits and the video phys enc will hit vblank timeout
errors after the first CWB commit.
[1] commit fe9df3f50c ("drm/msm/dpu: add real wait_for_commit_done()")
Fixes: 3e79527a33 ("drm/msm/dpu: enable merge_3d support on sm8150/sm8250")
Fixes: d7d0e73f7d ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/619092/
Link: https://lore.kernel.org/r/20241009-mode3d-fix-v1-1-c0258354fadc@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
rzg2l_irqc_common_init() calls of_find_device_by_node(), but the
corresponding put_device() call is missing. This also gets reported by
make coccicheck.
Make use of the cleanup interfaces from cleanup.h to call into
__free_put_device(), which in turn calls into put_device when leaving
function rzg2l_irqc_common_init() and variable "dev" goes out of scope.
To prevent that the device is put on successful completion, assign NULL to
"dev" to prevent __free_put_device() from calling into put_device() within
the successful path.
"make coccicheck" will still complain about missing put_device() calls,
but those are false positives now.
Fixes: 3fed09559c ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241011172003.1242841-1-fabrizio.castro.jz@renesas.com
When CONFIG_SMP is disabled, the static array rintc_acpi_data with size
NR_CPUS is not sufficient to hold all RINTC structures passed from the
firmware.
All RINTC structures are required to configure IMSIC/APLIC/PLIC properly
irrespective of SMP in the OS. So, allocate dynamic memory based on the
number of RINTC structures in MADT to fix this issue.
Fixes: f8619b66bd ("irqchip/riscv-intc: Add ACPI support for AIA")
Reported-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/all/20241014065739.656959-1-sunilvl@ventanamicro.com
Closes: https://github.com/linux-riscv/linux-riscv/actions/runs/11280997511/job/31375229012
Couple of fixes to address the issues found and reported on Broadcom
STB platforms following the recent refactor of all the SCMI transports
as standalone drivers.
One of the issue is that the effective timeout value is much less than
the intended value due to the way mailbox messages are queues in the
mailbox framework. Since we block or serialise the shmem access anyway,
there is no point in utilizing mailbox queues. The issue is fixed with
exclusive lock on the channel when sending the message.
The other issues is actually non-issue for upstream, but the workaround
is just changing the link order of the transport drivers which enables
Broadcom STB platforms to run both upstream and custom downstream kernel
without any device tree changes. So pushing this to help them test upstream
seamlessly as it has no practical or theoretical impact for others.
There is also a fix to address possible double freeing of the name string
in scmi_debugfs_common_cleanup() when devm_add_action_or_reset() fails.
-----BEGIN PGP SIGNATURE-----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=NahH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iRE2
-----END PGP SIGNATURE-----
Merge tag 'scmi-fixes-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v6.12
Couple of fixes to address the issues found and reported on Broadcom
STB platforms following the recent refactor of all the SCMI transports
as standalone drivers.
One of the issue is that the effective timeout value is much less than
the intended value due to the way mailbox messages are queues in the
mailbox framework. Since we block or serialise the shmem access anyway,
there is no point in utilizing mailbox queues. The issue is fixed with
exclusive lock on the channel when sending the message.
The other issues is actually non-issue for upstream, but the workaround
is just changing the link order of the transport drivers which enables
Broadcom STB platforms to run both upstream and custom downstream kernel
without any device tree changes. So pushing this to help them test upstream
seamlessly as it has no practical or theoretical impact for others.
There is also a fix to address possible double freeing of the name string
in scmi_debugfs_common_cleanup() when devm_add_action_or_reset() fails.
* tag 'scmi-fixes-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Queue in scmi layer for mailbox implementation
firmware: arm_scmi: Give SMC transport precedence over mailbox
firmware: arm_scmi: Fix the double free in scmi_debugfs_common_setup()
Link: https://lore.kernel.org/r/20241015185128.1000604-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Couple of fixes to avoid string-fortify warnings in export_uuid()
and memcpy() from the recently added functions to support
FFA_MSG_SEND_DIRECT_REQ2 and FFA_MSG_SEND_DIRECT_RESP2.
-----BEGIN PGP SIGNATURE-----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=WC7N
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rApe
-----END PGP SIGNATURE-----
Merge tag 'ffa-fixes-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fixes for v6.12
Couple of fixes to avoid string-fortify warnings in export_uuid()
and memcpy() from the recently added functions to support
FFA_MSG_SEND_DIRECT_REQ2 and FFA_MSG_SEND_DIRECT_RESP2.
* tag 'ffa-fixes-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Avoid string-fortify warning caused by memcpy()
firmware: arm_ffa: Avoid string-fortify warning in export_uuid()
Link: https://lore.kernel.org/r/20241015185037.1000435-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix a NULL pointer dereference in reset-starfive-jh71x0 and replace two
accidental commas at line endings with semicolons in reset-npcm.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCZvrU+BcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwJ/9AQDe+wS08tPdqgzSTOvs42XXZ8M/
3t99X6GZ3+Bw7H0xKwD+NoQt9P01KQHxIHJcLhRiExgz5cMteV6c/IcH9670+Ak=
=bjQQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2I4v
-----END PGP SIGNATURE-----
Merge tag 'reset-fixes-for-v6.12' of git://git.pengutronix.de/pza/linux into arm/fixes
Reset controller fixes for v6.12
Fix a NULL pointer dereference in reset-starfive-jh71x0 and replace two
accidental commas at line endings with semicolons in reset-npcm.
* tag 'reset-fixes-for-v6.12' of git://git.pengutronix.de/pza/linux:
reset: starfive: jh71x0: Fix accessing the empty member on JH7110 SoC
reset: npcm: convert comma to semicolon
Link: https://lore.kernel.org/r/20240930165733.1541936-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The bcm_sysport_xmit() returns NETDEV_TX_OK without freeing skb
in case of dma_map_single() fails, add dev_kfree_skb() to fix it.
Fixes: 80105befdb ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://patch.msgid.link/20241014145115.44977-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix ref counter of buffers assigned at boot up
A tracing instance can be created from the kernel command line.
If it maps to memory, it is considered permanent and should not
be deleted, or bad things can happen. If it is not mapped to memory,
then the user is fine to delete it via rmdir from the instances
directory. But the ref counts assumed 0 was free to remove and
greater than zero was not. But this was not the case. When an
instance is created, it should have the reference of 1, and if
it should not be removed, it must be greater than 1. The boot up
code set normal instances with a ref count of 0, which could get
removed if something accessed it and then released it. And memory
mapped instances had a ref count of 1 which meant it could be deleted,
and bad things happen. Keep normal instances ref count as 1, and
set memory mapped instances ref count to 2.
- Protect sub buffer size (order) updates from other modifications
When a ring buffer is changing the size of its sub-buffers, no other
operations should be performed on the ring buffer. That includes
reading it. But the locking only grabbed the buffer->mutex that
keeps some operations from touching the ring buffer. It also must
hold the cpu_buffer->reader_lock as well when updates happen as
other paths use that to do some operations on the ring buffer.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZw6LSRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qr8NAP4ggN51IEEDLINUctXvTnJAbRdRiZcC
Z/q/5hfPS2+uAgEArSfVRCMdCCiVMZv+R9i6YPzn1Ux2OTGbcOHz56lZKgY=
=GwKu
-----END PGP SIGNATURE-----
Merge tag 'trace-ringbuffer-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer fixes from Steven Rostedt:
- Fix ref counter of buffers assigned at boot up
A tracing instance can be created from the kernel command line. If it
maps to memory, it is considered permanent and should not be deleted,
or bad things can happen. If it is not mapped to memory, then the
user is fine to delete it via rmdir from the instances directory. But
the ref counts assumed 0 was free to remove and greater than zero was
not. But this was not the case. When an instance is created, it
should have the reference of 1, and if it should not be removed, it
must be greater than 1. The boot up code set normal instances with a
ref count of 0, which could get removed if something accessed it and
then released it. And memory mapped instances had a ref count of 1
which meant it could be deleted, and bad things happen. Keep normal
instances ref count as 1, and set memory mapped instances ref count
to 2.
- Protect sub buffer size (order) updates from other modifications
When a ring buffer is changing the size of its sub-buffers, no other
operations should be performed on the ring buffer. That includes
reading it. But the locking only grabbed the buffer->mutex that keeps
some operations from touching the ring buffer. It also must hold the
cpu_buffer->reader_lock as well when updates happen as other paths
use that to do some operations on the ring buffer.
* tag 'trace-ringbuffer-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Fix reader locking when changing the sub buffer order
ring-buffer: Fix refcount setting of boot mapped buffers
Dimitar Kanaliev says:
====================
Fix truncation bug in coerce_reg_to_size_sx and extend selftests.
This patch series addresses a truncation bug in the eBPF verifier function
coerce_reg_to_size_sx(). The issue was caused by the incorrect ordering
of assignments between 32-bit and 64-bit min/max values, leading to
improper truncation when updating the register state. This issue has been
reported previously by Zac Ecob[1] , but was not followed up on.
The first patch fixes the assignment order in coerce_reg_to_size_sx()
to ensure correct truncation. The subsequent patches add selftests for
coerce_{reg,subreg}_to_size_sx.
Changelog:
v1 -> v2:
- Moved selftests inside the conditional check for cpuv4
[1] (https://lore.kernel.org/bpf/h3qKLDEO6m9nhif0eAQX4fVrqdO0D_OPb0y5HfMK9jBePEKK33wQ3K-bqSVnr0hiZdFZtSJOsbNkcEQGpv_yJk61PAAiO8fUkgMRSO-lB50=@protonmail.com/)
====================
Link: https://lore.kernel.org/r/20241014121155.92887-1-dimitar.kanaliev@siteground.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test for unsigned ranges after signed extension instruction. This
case isn't currently covered by existing tests in verifier_movsx.c.
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Dimitar Kanaliev <dimitar.kanaliev@siteground.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241014121155.92887-4-dimitar.kanaliev@siteground.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add test that checks whether unsigned ranges deduced by the verifier for
sign extension instruction is correct. Without previous patch that
fixes truncation in coerce_reg_to_size_sx() this test fails.
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Dimitar Kanaliev <dimitar.kanaliev@siteground.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241014121155.92887-3-dimitar.kanaliev@siteground.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
coerce_reg_to_size_sx() updates the register state after a sign-extension
operation. However, there's a bug in the assignment order of the unsigned
min/max values, leading to incorrect truncation:
0: (85) call bpf_get_prandom_u32#7 ; R0_w=scalar()
1: (57) r0 &= 1 ; R0_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1,var_off=(0x0; 0x1))
2: (07) r0 += 254 ; R0_w=scalar(smin=umin=smin32=umin32=254,smax=umax=smax32=umax32=255,var_off=(0xfe; 0x1))
3: (bf) r0 = (s8)r0 ; R0_w=scalar(smin=smin32=-2,smax=smax32=-1,umin=umin32=0xfffffffe,umax=0xffffffff,var_off=(0xfffffffffffffffe; 0x1))
In the current implementation, the unsigned 32-bit min/max values
(u32_min_value and u32_max_value) are assigned directly from the 64-bit
signed min/max values (s64_min and s64_max):
reg->umin_value = reg->u32_min_value = s64_min;
reg->umax_value = reg->u32_max_value = s64_max;
Due to the chain assigmnent, this is equivalent to:
reg->u32_min_value = s64_min; // Unintended truncation
reg->umin_value = reg->u32_min_value;
reg->u32_max_value = s64_max; // Unintended truncation
reg->umax_value = reg->u32_max_value;
Fixes: 1f9a1ea821 ("bpf: Support new sign-extension load insns")
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Reported-by: Zac Ecob <zacecob@protonmail.com>
Signed-off-by: Dimitar Kanaliev <dimitar.kanaliev@siteground.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20241014121155.92887-2-dimitar.kanaliev@siteground.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- New metadata version inode_has_child_snapshots
This fixes bugs with handling of unlinked inodes + snapshots, in
particular when an inode is reattached after taking a snapshot;
deleted inodes now get correctly cleaned up across snapshots.
- Disk accounting rewrite fixes
- validation fixes for when a device has been removed
- fix journal replay failing with "journal_reclaim_would_deadlock"
- Some more small fixes for erasure coding + device removal
- Assorted small syzbot fixes
-----BEGIN PGP SIGNATURE-----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=Rkq2
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-10-14' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- New metadata version inode_has_child_snapshots
This fixes bugs with handling of unlinked inodes + snapshots, in
particular when an inode is reattached after taking a snapshot;
deleted inodes now get correctly cleaned up across snapshots.
- Disk accounting rewrite fixes
- validation fixes for when a device has been removed
- fix journal replay failing with "journal_reclaim_would_deadlock"
- Some more small fixes for erasure coding + device removal
- Assorted small syzbot fixes
* tag 'bcachefs-2024-10-14' of git://evilpiepirate.org/bcachefs: (27 commits)
bcachefs: Fix sysfs warning in fstests generic/730,731
bcachefs: Handle race between stripe reuse, invalidate_stripe_to_dev
bcachefs: Fix kasan splat in new_stripe_alloc_buckets()
bcachefs: Add missing validation for bch_stripe.csum_granularity_bits
bcachefs: Fix missing bounds checks in bch2_alloc_read()
bcachefs: fix uaf in bch2_dio_write_done()
bcachefs: Improve check_snapshot_exists()
bcachefs: Fix bkey_nocow_lock()
bcachefs: Fix accounting replay flags
bcachefs: Fix invalid shift in member_to_text()
bcachefs: Fix bch2_have_enough_devs() for BCH_SB_MEMBER_INVALID
bcachefs: __wait_for_freeing_inode: Switch to wait_bit_queue_entry
bcachefs: Check if stuck in journal_res_get()
closures: Add closure_wait_event_timeout()
bcachefs: Fix state lock involved deadlock
bcachefs: Fix NULL pointer dereference in bch2_opt_to_text
bcachefs: Release transaction before wake up
bcachefs: add check for btree id against max in try read node
bcachefs: Disk accounting device validation fixes
bcachefs: bch2_inode_or_descendents_is_open()
...
The rtsn_start_xmit() returns NETDEV_TX_OK without freeing skb
in case of skb->len being too long, add dev_kfree_skb_any() to fix it.
Fixes: b0d3969d2b ("net: ethernet: rtsn: Add support for Renesas Ethernet-TSN")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014144250.38802-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The axienet_start_xmit() returns NETDEV_TX_OK without freeing skb
in case of dma_map_single() fails, add dev_kfree_skb_any() to fix it.
Fixes: 71791dc8bd ("net: axienet: Check for DMA mapping errors")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20241014143704.31938-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Explicitly verify that MPC connection attempts towards a port-based
signal endpoint fail with a reset.
Note that this new test is a bit different from the other ones, not
using 'run_tests'. It is then needed to add the capture capability, and
the picking the right port which have been extracted into three new
helpers. The info about the capture can also be printed from a single
point, which simplifies the exit paths in do_transfer().
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 1729cf186d ("mptcp: create the listening socket for new port")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241014-net-mptcp-mpc-port-endp-v2-2-7faea8e6b6ae@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pnetid of pi (not newly allocated pe) should be compared
Fixes: e888a2e833 ("net/smc: introduce list of pnetids for Ethernet devices")
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Link: https://patch.msgid.link/20241014115321.33234-1-lirongqing@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A boot delay was introduced by commit 79540d133e ("net: macb: Fix
handling of fixed-link node"). This delay was caused by the call to
`mdiobus_register()` in cases where a fixed-link PHY was present. The
MDIO bus registration triggered unnecessary PHY address scans, leading
to a 20-second delay due to attempts to detect Clause 45 (C45)
compatible PHYs, despite no MDIO bus being attached.
The commit 79540d133e ("net: macb: Fix handling of fixed-link node")
was originally introduced to fix a regression caused by commit
7897b071ac ("net: macb: convert to phylink"), which caused the driver
to misinterpret fixed-link nodes as PHY nodes. This resulted in warnings
like:
mdio_bus f0028000.ethernet-ffffffff: fixed-link has invalid PHY address
mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 0
...
mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 31
This patch reworks the logic to avoid registering and allocation of the
MDIO bus when:
- The device tree contains a fixed-link node.
- There is no "mdio" child node in the device tree.
If a child node named "mdio" exists, the MDIO bus will be registered to
support PHYs attached to the MACB's MDIO bus. Otherwise, with only a
fixed-link, the MDIO bus is skipped.
Tested on a sama5d35 based system with a ksz8863 switch attached to
macb0.
Fixes: 79540d133e ("net: macb: Fix handling of fixed-link node")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241013052916.3115142-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The greth_start_xmit_gbit() returns NETDEV_TX_OK without freeing skb
in case of skb->len being too long, add dev_kfree_skb() to fix it.
Fixes: d4c41139df ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20241012110434.49265-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On RX, we shouldn't be incrementing the stats for an arbitrary SA in
case the actual SA hasn't been set up. Those counters are intended to
track packets for their respective AN when the SA isn't currently
configured. Due to the way MACsec is implemented, we don't keep
counters unless the SA is configured, so we can't track those packets,
and those counters will remain at 0.
The RXSC's stats keeps track of those packets without telling us which
AN they belonged to. We could add counters for non-existent SAs, and
then find a way to integrate them in the dump to userspace, but I
don't think it's worth the effort.
Fixes: 91ec9bd57f ("macsec: Fix traffic counters/statistics")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/f5ac92aaa5b89343232615f4c03f9f95042c6aa0.1728657709.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to store device DMA parameters, the DMA framework depends on
the device's dma_parms field to point at a valid memory location. Add
backing storage for this in struct host1x_memory_context and point to
it.
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916133320.368620-1-thierry.reding@gmail.com
(cherry picked from commit b4ad4ef374)
Signed-off-by: Thierry Reding <treding@nvidia.com>
Include the encoder itself in its possible_clones bitmask.
In the past nothing validated that drivers were populating
possible_clones correctly, but that changed in commit
74d2aacbe8 ("drm: Validate encoder->possible_clones").
Looks like radeon never got the memo and is still not
following the rules 100% correctly.
This results in some warnings during driver initialization:
Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x4 (full encoder mask=0x7)
WARNING: CPU: 0 PID: 170 at drivers/gpu/drm/drm_mode_config.c:615 drm_mode_config_validate+0x113/0x39c
...
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Fixes: 74d2aacbe8 ("drm: Validate encoder->possible_clones")
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/20241009000321.418e4294@yea/
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3b6e7d4064)
Cc: stable@vger.kernel.org
Process device data pdd->vram_usage is read by rocm-smi via sysfs, this
is currently missing the svm_bo usage accounting, so "rocm-smi
--showpids" per process VRAM usage report is incorrect.
Add pdd->vram_usage accounting when svm_bo allocation and release,
change to atomic64_t type because it is updated outside process mutex
now.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 98c0b0efcc)
With Unified MES enabled in gfx12, need separate event log buffer for the
2 MES pipes to avoid data overwrite.
Signed-off-by: Michael Chen <michael.chen@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 144df260f3)
Cc: stable@vger.kernel.org # 6.11.x
Before this patch, if multiple BO_HANDLES chunks were submitted,
the error -EINVAL would be correctly set but could be overwritten
by the return value from amdgpu_cs_p1_bo_handles(). This patch
ensures that if there are multiple BO_HANDLES, we stop.
Fixes: fec5f8e8c6 ("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit")
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 40f2cd9882)
Cc: stable@vger.kernel.org
It should be enabled on both bare metal and VFs.
Fixes: e189be9b2e ("drm/amdgpu: Add enforce_isolation sysfs attribute")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Cc: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
(cherry picked from commit dc8847b054)
We need to suppress the partition scan from occuring within the
controller's scan_work context. If a path error occurs here, the IO will
wait until a path becomes available or all paths are torn down, but that
action also occurs within scan_work, so it would deadlock. Defer the
partion scan to a different context that does not block scan_work.
Reported-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When an application uses SQPOLL, it must wait for the SQPOLL thread to
consume SQE entries, if it fails to get an sqe when calling
io_uring_get_sqe(). It can do so by calling io_uring_enter(2) with the
flag value of IORING_ENTER_SQ_WAIT. In liburing, this is generally done
with io_uring_sqring_wait(). There's a natural expectation that once
this call returns, a new SQE entry can be retrieved, filled out, and
submitted. However, the kernel uses the cached sq head to determine if
the SQRING is full or not. If the SQPOLL thread is currently in the
process of submitting SQE entries, it may have updated the cached sq
head, but not yet committed it to the SQ ring. Hence the kernel may find
that there are SQE entries ready to be consumed, and return successfully
to the application. If the SQPOLL thread hasn't yet committed the SQ
ring entries by the time the application returns to userspace and
attempts to get a new SQE, it will fail getting a new SQE.
Fix this by having io_sqring_full() always use the user visible SQ ring
head entry, rather than the internally cached one.
Cc: stable@vger.kernel.org # 5.10+
Link: https://github.com/axboe/liburing/discussions/1267
Reported-by: Benedek Thaler <thaler@thaler.hu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 4c27ac45e6 ("gpu: host1x: Request syncpoint IRQs only during
probe") caused a boot regression for the Tegra186 device. Following this
update the function host1x_intr_init() now calls
host1x_hw_intr_disable_all_syncpt_intrs() during probe. However,
host1x_intr_init() is called before runtime power-management is enabled
for Host1x and the function host1x_hw_intr_disable_all_syncpt_intrs() is
accessing hardware registers. So if the Host1x hardware is not enabled
prior to probing then the device will now hang on attempting to access
the registers. So far this is only observed on Tegra186, but potentially
could be seen on other devices.
Fix this by moving the call to the function host1x_intr_init() in probe
to after enabling the runtime power-management in the probe and update
the failure path in probe as necessary.
Fixes: 4c27ac45e6 ("gpu: host1x: Request syncpoint IRQs only during probe")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240925160504.60221-1-jonathanh@nvidia.com
(cherry picked from commit dc56f8428e)
Signed-off-by: Thierry Reding <treding@nvidia.com>
