Enable the CQEIE field and configure the CQEIS field of QPC. And add
compatibility handling.
Link: https://lore.kernel.org/r/20221224102201.3114536-4-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rq inline makes some changes as follows, Firstly, it is only used in
user space. Secondly, it should notify hardware in QP RTR status. Thirdly,
Add compatibility processing between different user space and kernel
space.
Link: https://lore.kernel.org/r/20221224102201.3114536-3-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The roce driver kernel space will no longer provide support for the rq
inline feature. This patch deletes the code related to the rq inline
feature in the kernel space.
Link: https://lore.kernel.org/r/20221224102201.3114536-2-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmONI6weHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG9xgH/jqXGuMoO1ikfmGb
7oY0W/f69G9V/e0DxFLvnIjhFgCUzdnNsmD4jQJA4x6QsxwLWuvpI282Ez+bHV5T
U4RPsxJZIIMsXE2lKM9BRgeLzDdCt0aK4Pj+3x2x7NZC5cWFSQ8PyQJkCwg+0PQo
u8Ly+GO8c4RUMf4/rrAZQq16qZUqGDaGm1EJhtSoa+KiR81LmUUmbDIK9Mr53rmQ
wou+95XhibwMWr17WgXA28bTgYqn9UGr67V3qvTH2LC7GW8BCoKvn+3wh6TVhlWj
dsWplXgcOP0/OHvSC5Sb1Uibk5Gx3DlIzYa6OfNZQuZ5xmQqm9kXjW8lmYpWFHy/
38/5HWc=
=EuoA
-----END PGP SIGNATURE-----
Merge tag 'v6.1-rc8' into rdma.git for-next
For dependencies in following patches
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
XRC caps has been set by default. But in fact, XRC is not supported in
HIP08.
Fixes: 32548870d4 ("RDMA/hns: Add support for XRC on HIP09")
Link: https://lore.kernel.org/r/20221126102911.2921820-7-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The error code is fixed to EIO when CMD fails to excute. This patch
converts the error status reported by firmware to linux errno.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/20221126102911.2921820-6-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add verification to make sure the roce page size cap is supported by the
system page size.
Fixes: ba6bb7e974 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/20221126102911.2921820-5-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now, The address of the first two pages in the MR will be searched, which
use to speed up the lookup of the pbl table for hardware. An exception
will occur when there is only one page in this MR. This patch fix the
number of page to search.
Fixes: 9b2cf76c9f ("RDMA/hns: Optimize PBL buffer allocation process")
Link: https://lore.kernel.org/r/20221126102911.2921820-4-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The queried AH attr is invalid. This patch fix it.
This problem is found by rdma-core test test_mr_rereg_pd
ERROR: test_mr_rereg_pd (tests.test_mr.MRTest)
Test that cover rereg MR's PD with this flow:
----------------------------------------------------------------------
Traceback (most recent call last):
File "./tests/test_mr.py", line 157, in test_mr_rereg_pd
self.restate_qps()
File "./tests/test_mr.py", line 113, in restate_qps
self.server.qp.to_rts(self.server_qp_attr)
File "qp.pyx", line 1137, in pyverbs.qp.QP.to_rts
File "qp.pyx", line 1123, in pyverbs.qp.QP.to_rtr
pyverbs.pyverbs_error.PyverbsRDMAError: Failed to modify QP state to RTR.
Errno: 22, Invalid argument
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/20221126102911.2921820-3-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
After the hns roce driver is loaded, if you modify the mac address of the
network port, the following error will appear:
__ib_cache_gid_add: unable to add gid fe80:0000:0000:0000:4600:4dff:fe22:abb5 error=-28
hns3 0000:7d:00.0 hns_0: attr path_mtu(1) invalid while modify qp
The reason for the error is that the gid being occupied will cause the
failure to modify the gid. The gid is occupied by the loopback QP used by
free mr. When the mac address is modified, the gid will change. If there
is a busy QP at this time, the gid will not be released and the
modification will fail. The QP of free mr is created using the ib
interface. The ib interface will add a reference count to the gid,
resulting in this error scenario.
Considering that free mr is solving a bug in HIP08, not an actual
business, it is not necessary to use ib interfaces.
Fixes: 70f9252158 ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Link: https://lore.kernel.org/r/20221126102911.2921820-2-xuhaoyue1@hisilicon.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The user usually configures the number of sge through the max_send_sge
parameter when creating qp, and configures the maximum size of inline data
that can be sent through max_inline_data. Inline uses sge to fill data to
send. Expect the following:
1) When the sge space cannot hold inline data, the sge space needs to be
expanded to accommodate all inline data
2) When the sge space is enough to accommodate inline data, the upper
limit of inline data can be increased so that users can send larger
inline data
Currently case one is not implemented. When the inline data is larger than
the sge space, an error of insufficient sge space occurs. This part of
the code needs to be reimplemented according to the expected rules. The
calculation method of sge num is modified to take the maximum value of
max_send_sge and the sge for max_inline_data to solve this problem.
Fixes: 05201e01be ("RDMA/hns: Refactor process of setting extended sge")
Fixes: 30b707886a ("RDMA/hns: Support inline data in extented sge space for RC")
Link: https://lore.kernel.org/r/20221108133847.2304539-3-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In the HNS ROCE driver, The sge is divided into standard sge and extended
sge. There are 2 standard sge in RC/XRC, and the UD standard sge is 0.
In the scenario of RC SQ inline, if the data does not exceed 32bytes, the
standard sge will be used. If it exceeds, only the extended sge will be
used to fill the data.
Currently, when filling the extended sge, max_gs is directly used as the
number of the extended sge, which did not subtract the number of standard
sge. There is a logical error. The new algorithm subtracts the number of
standard sge from max_gs to get the actual number of extended sge.
Fixes: 30b707886a ("RDMA/hns: Support inline data in extented sge space for RC")
Link: https://lore.kernel.org/r/20221108133847.2304539-2-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Lock grab occurs in a concurrent scenario, resulting in stepping on a NULL
pointer. It should be init mutex_init() first before use the lock.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
__mutex_lock.constprop.0+0xd0/0x5c0
__mutex_lock_slowpath+0x1c/0x2c
mutex_lock+0x44/0x50
free_mr_send_cmd_to_hw+0x7c/0x1c0 [hns_roce_hw_v2]
hns_roce_v2_dereg_mr+0x30/0x40 [hns_roce_hw_v2]
hns_roce_dereg_mr+0x4c/0x130 [hns_roce_hw_v2]
ib_dereg_mr_user+0x54/0x124
uverbs_free_mr+0x24/0x30
destroy_hw_idr_uobject+0x38/0x74
uverbs_destroy_uobject+0x48/0x1c4
uobj_destroy+0x74/0xcc
ib_uverbs_cmd_verbs+0x368/0xbb0
ib_uverbs_ioctl+0xec/0x1a4
__arm64_sys_ioctl+0xb4/0x100
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x58/0x190
do_el0_svc+0x30/0x90
el0_svc+0x2c/0xb4
el0t_64_sync_handler+0x1a4/0x1b0
el0t_64_sync+0x19c/0x1a0
Fixes: 70f9252158 ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Link: https://lore.kernel.org/r/20221024083814.1089722-3-xuhaoyue1@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When function reset and local invalidate are mixed, HNS RoCEE may hang.
Before introducing the cause of the problem, two hardware internal
concepts need to be introduced:
1. Execution queue: The queue of hardware execution instructions,
function reset and local invalidate are queued for execution in this
queue.
2.Local queue: A queue that stores local operation instructions. The
instructions in the local queue will be sent to the execution queue
for execution. The instructions in the local queue will not be removed
until the execution is completed.
The reason for the problem is as follows:
1. There is a function reset instruction in the execution queue, which
is currently being executed. A necessary condition for the successful
execution of function reset is: the hardware pipeline needs to empty
the instructions that were not completed before;
2. A local invalidate instruction at the head of the local queue is
sent to the execution queue. Now there are two instructions in the
execution queue, the first is the function reset instruction, and the
second is the local invalidate instruction, which will be executed in
se quence;
3. The user has issued many local invalidate operations, causing the
local queue to be filled up.
4. The user still has a new local operation command and is queuing to
enter the local queue. But the local queue is full and cannot receive
new instructions, this instruction is temporarily stored at the
hardware pipeline.
5. The function reset has been waiting for the instruction before the
hardware pipeline stage is drained. The hardware pipeline stage also
caches a local invalidate instruction, so the function reset cannot be
completed, and the instructions after it cannot be executed.
These factors together cause the execution logic deadlock of the hardware,
and the consequence is that RoCEE will not have any response. Considering
that the local operation command may potentially cause RoCEE to hang, this
feature is no longer supported.
Fixes: e93df01085 ("RDMA/hns: Support local invalidate for hip08 in kernel space")
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Link: https://lore.kernel.org/r/20221024083814.1089722-2-xuhaoyue1@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The first letter of the log information is changed to lowercase
to keep the same style.
Link: https://lore.kernel.org/r/20220922123315.3732205-13-xuhaoyue1@hisilicon.com
Signed-off-by: Guofeng Yue <yueguofeng@hisilicon.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The sge size is known to be constant, so it's unnecessary to use sizeof to
calculate.
Link: https://lore.kernel.org/r/20220922123315.3732205-11-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The max_srq_desc_sz is defined in the code, but never used,
so delete this redundant variable.
Link: https://lore.kernel.org/r/20220922123315.3732205-10-xuhaoyue1@hisilicon.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The num_mtt_segs and max_extend_sg used to be used for HIP06,
remove them since the HIP06 code has been removed.
Link: https://lore.kernel.org/r/20220922123315.3732205-9-xuhaoyue1@hisilicon.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The bt number of qpc_timer of HIP09 increases compared with that of HIP08.
Therefore, qpc_timer_bt_num and num_qpc_timer do not match. As a result,
the driver may fail to allocate qpc_timer. So the driver needs to uniquely
uses qpc_timer_bt_num to represent the bt number of qpc_timer.
Fixes: 0e40dc2f70 ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/20220829105021.1427804-4-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The MR raw restrack attributes come from the queue context maintained by
the ROCEE.
For example:
$ rdma res show mr dev hns_0 mrn 6 -dd -jp -r
[ {
"ifindex": 4,
"ifname": "hns_0",
"data": [ 1,0,0,0,2,0,0,0,0,3,0,0,0,0,2,0,0,0,0,0,32,0,0,0,2,0,0,0,
2,0,0,0,0,0,0,0 ]
} ]
Link: https://lore.kernel.org/r/20220822104455.2311053-8-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The QP raw restrack attributes come from the queue context maintained by
the ROCEE.
For example:
$ rdma res show qp link hns_0 -jp -dd -r
[ {
"ifindex": 4,
"ifname": "hns_0",
"data": [ 2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,4,0,0,0,
5,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,255,156,0,0,63,156,0,0,
7,0,0,0,1,0,0,0,9,0,0,0,0,0,0,0,2,0,0,0,2,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,63,156,0,
0,0,0,0,0 ]
} ]
Link: https://lore.kernel.org/r/20220822104455.2311053-6-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
There is no need to use a dedicated DXF file and DFX structure to manage
the interface of the query queue context.
Link: https://lore.kernel.org/r/20220822104455.2311053-2-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Since ECC memory maintains a memory system immune to single-bit errors,
add support for correcting the 1bit-ECC error, which prevents a 1bit-ECC
error become an uncorrected type error. When a 1bit-ECC error happens in
the internal ram of the ROCE engine, such as the QPC table, as a 1bit-ECC
error caused by reading, the ROCE engine only corrects those 1bit ECC
errors by writing.
Link: https://lore.kernel.org/r/20220714134353.16700-6-liangwenpeng@huawei.com
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Use a single function to handle the same kind of abnormal interrupts.
Link: https://lore.kernel.org/r/20220714134353.16700-5-liangwenpeng@huawei.com
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The driver will clear all the interrupts in the same area
when the driver handles the interrupt of type AEQ overflow.
It should only set the interrupt status bit of type AEQ overflow.
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Link: https://lore.kernel.org/r/20220714134353.16700-4-liangwenpeng@huawei.com
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The type of return value of the interrupt handler should be irqreturn_t.
Link: https://lore.kernel.org/r/20220714134353.16700-3-liangwenpeng@huawei.com
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The HNS NIC driver receives and handles the abnormal interrupt of the RAS
type generated by ROCEE, and the HNS RDMA driver does not need to handle
this type of interrupt. Therefore, delete unused codes in the HNS RDMA
driver.
Link: https://lore.kernel.org/r/20220714134353.16700-2-liangwenpeng@huawei.com
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
To reduce the code size and make the code clearer, replace all
roce_get_xxx() with hr_reg_read() to read the data fields.
Link: https://lore.kernel.org/r/20220512080012.38728-3-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
To reduce the code size and make the code clearer, replace all
roce_set_xxx() with hr_reg_xxx() to write the data fields.
Link: https://lore.kernel.org/r/20220512080012.38728-2-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The bt number of cqc_timer of HIP09 increases compared with that of HIP08.
Therefore, cqc_timer_bt_num and num_cqc_timer do not match. As a result,
the driver may fail to allocate cqc_timer. So the driver needs to uniquely
uses cqc_timer_bt_num to represent the bt number of cqc_timer.
Fixes: 0e40dc2f70 ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/20220429093545.58070-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
CMDQ may fail during HNS ROCEE initialization. The following is the log
when the execution fails:
hns3 0000:bd:00.2: In reset process RoCE client reinit.
hns3 0000:bd:00.2: CMDQ move tail from 840 to 839
hns3 0000:bd:00.2 hns_2: failed to set gid, ret = -11!
hns3 0000:bd:00.2: CMDQ move tail from 840 to 839
<...>
hns3 0000:bd:00.2: CMDQ move tail from 840 to 839
hns3 0000:bd:00.2: CMDQ move tail from 840 to 0
hns3 0000:bd:00.2: [cmd]token 14e mailbox 20 timeout.
hns3 0000:bd:00.2 hns_2: set HEM step 0 failed!
hns3 0000:bd:00.2 hns_2: set HEM address to HW failed!
hns3 0000:bd:00.2 hns_2: failed to alloc mtpt, ret = -16.
infiniband hns_2: Couldn't create ib_mad PD
infiniband hns_2: Couldn't open port 1
hns3 0000:bd:00.2: Reset done, RoCE client reinit finished.
However, even if ib_mad client registration failed, ib_register_device()
still returns success to the driver.
In the device initialization process, CMDQ execution fails because HW/FW
is abnormal. Therefore, if CMDQ fails, the initialization function should
set CMDQ to a fatal error state and return a failure to the caller.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20220429093104.26687-1-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Assigning a value to ret in the init statement of a for-loop makes the
code less readable.
Link: https://lore.kernel.org/r/20220409083254.9696-6-liangwenpeng@huawei.com
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It is completely redundant for this function to use "ret" to store the
return value of the subfunction.
Link: https://lore.kernel.org/r/20220409083254.9696-4-liangwenpeng@huawei.com
Signed-off-by: Guofeng Yue <yueguofeng@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The sgid_attr cannot be null in this scenario. This judgment is redundant.
Fixes: 606bf89e98 ("RDMA/hns: Refactor for hns_roce_v2_modify_qp function")
Link: https://lore.kernel.org/r/20220409083254.9696-2-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Before destroying MPT, the reserved loopback QPs send loopback IOs (one
write operation per SL). Completing these loopback IOs represents that
there isn't any outstanding request in MPT, then it's safe to destroy MPT.
Link: https://lore.kernel.org/r/20220310042835.38634-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hns_roce_alloc_cmd_mailbox() never returns NULL, so the check should be
IS_ERR(). And the error code should be converted as the function's return
value.
Link: https://lore.kernel.org/r/20220302064830.61706-8-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The current mailbox functions have too many parameters, making the code
difficult to maintain. So construct a new structure mbox_msg to pass the
information needed by mailbox.
Link: https://lore.kernel.org/r/20220302064830.61706-6-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The "op" field of the mailbox occupies 8 bits, so the parameter "op"
should be of type u8.
Link: https://lore.kernel.org/r/20220302064830.61706-5-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The value of the function parameter “timeout” is unique. Therefore,
it is unnecessary to specify the parameter “timeout” value each time.
So remove it.
Link: https://lore.kernel.org/r/20220302064830.61706-3-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The parameter "op_modifier" is only used for HIP06. It is useless for HIP08
and later versions. After removing HIP06, this parameter is no longer used,
so remove it.
Link: https://lore.kernel.org/r/20220302064830.61706-2-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmHbZ+YeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGDs4H/RgC8JOV3Dki1VtO
6OwPxUKKojhVU9LJis7kyG5voB/zE7tK5nI+jC3gYGQUFKWaZ3YY8s3UcV1zvg/b
a44b91boA+dKxEwOq4RZNQ9mU+QWnNoG5+UqBkmB8vewi3QC3T8xEmpWcERLbU7d
KrI2T6i4ksJ9OYSYMEMyrvrpt7nt3n1tDX8b71faXjf1zbLeGo9zT53t6BJ/LknV
AK406Eq/3bg36OZrKFuG7hCJfRE/cSlxF9bxK3sIfMBMQ2YPe1S5+pxl5iBD0nyl
NaHOBYcLTxPAne3YgIvK0zDdsS+EtPSlaVdWfSmNjQhX2vqEixldgdrOCmwp37vd
3gV9D28=
=hrOo
-----END PGP SIGNATURE-----
Merge tag 'v5.16' into rdma.git for-next
To resolve minor conflict in:
drivers/infiniband/hw/mlx5/mlx5_ib.h
By merging both hunks.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Several drivers have the same function xxx_get_udp_sport. So this
function is moved to ib_verbs.h.
Link: https://lore.kernel.org/r/20220106180359.2915060-3-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
