mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-21 18:14:48 +08:00
c19c6c7b44
8649 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Mario Limonciello
|
f1324bbc40 |
tpm: disable hwrng for fTPM on some AMD designs
AMD has issued an advisory indicating that having fTPM enabled in BIOS can cause "stuttering" in the OS. This issue has been fixed in newer versions of the fTPM firmware, but it's up to system designers to decide whether to distribute it. This issue has existed for a while, but is more prevalent starting with kernel 6.1 because commit |
||
Morten Linderud
|
80a6c216b1 |
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.
Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.
The following hardware was used to test this issue:
Framework Laptop (Pre-production)
BIOS: INSYDE Corp, Revision: 3.2
TPM Device: NTC, Firmware Revision: 7.2
Dump of the faulty ACPI TPM2 table:
[000h 0000 4] Signature : "TPM2" [Trusted Platform Module hardware interface Table]
[004h 0004 4] Table Length : 0000004C
[008h 0008 1] Revision : 04
[009h 0009 1] Checksum : 2B
[00Ah 0010 6] Oem ID : "INSYDE"
[010h 0016 8] Oem Table ID : "TGL-ULT"
[018h 0024 4] Oem Revision : 00000002
[01Ch 0028 4] Asl Compiler ID : "ACPI"
[020h 0032 4] Asl Compiler Revision : 00040000
[024h 0036 2] Platform Class : 0000
[026h 0038 2] Reserved : 0000
[028h 0040 8] Control Address : 0000000000000000
[030h 0048 4] Start Method : 06 [Memory Mapped I/O]
[034h 0052 12] Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00
[040h 0064 4] Minimum Log Length : 00010000
[044h 0068 8] Log Address : 000000004053D000
Fixes:
|
||
Linus Torvalds
|
8ca09d5fa3 |
cpumask: fix incorrect cpumask scanning result checks
It turns out that commit
|
||
|
Linus Torvalds
|
693fed981e |
Char/Misc and other driver subsystem changes for 6.3-rc1
Here is the large set of driver changes for char/misc drivers and other
smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem seems
under very active development recently. This required also merging
in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/inQw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yksvwCeOvU//SPwrbIpaeHAmHUv0PSVOrwAoKmt4ICh
hQUudlztfkvUJxKIH0gh
=Sjk4
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the large set of driver changes for char/misc drivers and
other smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem
seems under very active development recently. This required also
merging in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the
shortlog
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
scripts/tags.sh: fix incompatibility with PCRE2
firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
mei: lower the log level for non-fatal failed messages
mei: bus: disallow driver match while dismantling device
misc: vmw_balloon: fix memory leak with using debugfs_lookup()
nvmem: stm32: fix OPTEE dependency
dt-bindings: nvmem: qfprom: add IPQ8074 compatible
nvmem: qcom-spmi-sdam: register at device init time
nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
nvmem: stm32: detect bsec pta presence for STM32MP15x
nvmem: stm32: add OP-TEE support for STM32MP13x
nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
nvmem: core: add nvmem_add_one_cell()
nvmem: core: drop the removal of the cells in nvmem_add_cells()
nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
nvmem: core: add an index parameter to the cell
of: property: add #nvmem-cell-cells property
of: property: make #.*-cells optional for simple props
of: base: add of_parse_phandle_with_optional_args()
net: add helper eth_addr_add()
...
|
||
|
Linus Torvalds
|
17cd4d6f05 |
TTY/Serial driver updates for 6.3-rc1
Here is the big set of serial and tty driver updates for 6.3-rc1. Once again, Jiri and Ilpo have done a number of core vt and tty/serial layer cleanups that were much needed and appreciated. Other than that, it's just a bunch of little tty/serial driver updates: - qcom-geni-serial driver updates - liteuart driver updates - hvcs driver cleanups - n_gsm updates and additions for new features - more 8250 device support added - fpga/dfl update and additions - imx serial driver updates - fsl_lpuart updates - other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/itAw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykJbQCfWv/J4ZElO108iHBU5mJCDagUDBgAnAtLLN6A SEAnnokGCDtA/BNIXeES =luRi -----END PGP SIGNATURE----- Merge tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of serial and tty driver updates for 6.3-rc1. Once again, Jiri and Ilpo have done a number of core vt and tty/serial layer cleanups that were much needed and appreciated. Other than that, it's just a bunch of little tty/serial driver updates: - qcom-geni-serial driver updates - liteuart driver updates - hvcs driver cleanups - n_gsm updates and additions for new features - more 8250 device support added - fpga/dfl update and additions - imx serial driver updates - fsl_lpuart updates - other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits) tty: n_gsm: add keep alive support serial: imx: remove a redundant check dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h tty: n_gsm: add TIOCMIWAIT support tty: n_gsm: add RING/CD control support tty: n_gsm: mark unusable ioctl structure fields accordingly serial: imx: get rid of registers shadowing serial: imx: refine local variables in rxint() serial: imx: stop using USR2 in FIFO reading loop serial: imx: remove redundant USR2 read from FIFO reading loop serial: imx: do not break from FIFO reading loop prematurely serial: imx: do not sysrq broken chars serial: imx: work-around for hardware RX flood serial: imx: factor-out common code to imx_uart_soft_reset() serial: 8250_pci1xxxx: Add power management functions to quad-uart driver serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver serial: 8250_pci1xxxx: Add driver for quad-uart support serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c tty: pcn_uart: fix memory leak with using debugfs_lookup() ... |
||
|
Linus Torvalds
|
3822a7c409 |
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
||
|
Linus Torvalds
|
bc009f9382 |
Small fixes to the SMBus IPMI and IPMB driver
Nothing big, cleanups, fixing names, and one small deviation from the specification fixed. -----BEGIN PGP SIGNATURE----- iQIyBAABCgAdFiEE/Q1c5nzg9ZpmiCaGYfOMkJGb/4EFAmP2DPYACgkQYfOMkJGb /4G+1w/1E3mqdn1P4pq9pcsTZRRRfrLxMYQAaZMOZu6cb/mOL1Bj0D/Ks/q9bkkF 1iCSYUgca6TVSmnF0o23cP2Q4cGmH4vEk/e1L5XF3A/gXJ1KK6T1p5g/pYhyIJze WRO/r1OKPvfsD+djkslafMlzE1lwKGQa4hlwXAkmeSZn5cijB4BKeh+i8Sv2C0ER PX8Ar3TTXrfSragXjzZdbXOksT4kskGpPkAYSwWj2dRM9+Sh2ReoOr0xiCy5Wnm6 gCVtjrPiVdtlAUi3OriUR1/IJjvWXuDBVFCKpd/w8urK61BsoMmrUVb319GOYH94 UTIz8SyxOaS8E3v46ToRrQHRvjlBNMQY3BrYMxfVp1NmR1VRJycPgKfviV0dezmK CvObTTK9JscSJ2BlmZ+u9sC4pN9OQCoA988B91plJ9X5GGI4VH/aQ+EN7XIjrRn7 09QV9OyW56yFdtgIWcvH8dwpsQQD4T1H7aWe50BtL6Z+NB8HnV6h9suSh9+Q6jgr K7MNXWgxVvKs+MolbuUNJ6iWYTwgcAIz/21h2deZrtQ6vXKZFyQBHzGiN9We6nwz J/Pbz4R4pE7l/zsP+yNdPi7XRa8uieNOXbp3GoorhRBPyQC38AWJTUh4FybOEB9V Gj/iDAm6L6VRwTSXYarFvmU1vq/EPVHTGZ3Vz6Mam62JXFoShQ== =qBVV -----END PGP SIGNATURE----- Merge tag 'for-linus-6.3-1' of https://github.com/cminyard/linux-ipmi Pull IPMI updates from Corey Minyard: "Small fixes to the SMBus IPMI and IPMB driver. Nothing big, cleanups, fixing names, and one small deviation from the specification fixed" * tag 'for-linus-6.3-1' of https://github.com/cminyard/linux-ipmi: ipmi: ipmb: Fix the MODULE_PARM_DESC associated to 'retry_time_ms' ipmi:ssif: Add a timer between request retries ipmi:ssif: Remove rtc_us_timer ipmi_ssif: Rename idle state and check ipmi:ssif: resend_msg() cannot fail |
||
|
Linus Torvalds
|
36289a03bc |
This update includes the following changes:
API: - Use kmap_local instead of kmap_atomic. - Change request callback to take void pointer. - Print FIPS status in /proc/crypto (when enabled). Algorithms: - Add rfc4106/gcm support on arm64. - Add ARIA AVX2/512 support on x86. Drivers: - Add TRNG driver for StarFive SoC. - Delete ux500/hash driver (subsumed by stm32/hash). - Add zlib support in qat. - Add RSA support in aspeed. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmPzAiwACgkQxycdCkmx i6et8xAAoO3w5MZFGXMzWsYhfSZFdceXBEQfDR7JOCdHxpMIQhw0FLlb0uttFk6m SeWrdP9wiifBDoCmw7qffFJml8ZftPL/XeXjob2d9v7jKbPyw3lDSIdsNfN/5EEL oIc9915zwrgawvahPAa+PQ4Ue03qRjUyOcV42dpd1W3NYhzDVHoK5OUU+mEFYDvx Sgw/YUugKf0VXkVDFzG5049+CPcheyRZqclAo9jyl2eZiXujgUyV33nxRCtqIA+t 7jlHKwi+6QzFHY0CX5BvShR8xyEuH5MLoU3H/jYGXnRb3nEpRYAEO4VZchIHqF0F Y6pKIKc6Q8OyIVY8RsjQY3hioCqYnQFZ5Xtc1zGtOYEitVLbkmItMG0mVn0XOfyt gJDi6gkEw5uPUbEQdI4R1xEgJ8eCckMsOJ+uRxqTm+uLqNDxPbsB9bohKniMogXV lDlVXjU23AA9VeKtqU8FvWjfgqsN47X4aoq1j4/4aI7X9F7P9FOP21TZloP7+ssj PFrzNaRXUrMEsvyS1wqPegIh987lj6WkH4hyU0wjzaIq4IQELidHsSXFS12iWIPH kTEoC/trAVoYSr0zXKWUCs4h/x0FztVNbjs4KiDP2FLXX1RzeVZ0WlaXZhryHr+n 1+8yCuS6tVofAbSX0wNkZdf0x5+3CIBw4kqSIvjKDPYYEfIDaT0= =dMYe -----END PGP SIGNATURE----- Merge tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Use kmap_local instead of kmap_atomic - Change request callback to take void pointer - Print FIPS status in /proc/crypto (when enabled) Algorithms: - Add rfc4106/gcm support on arm64 - Add ARIA AVX2/512 support on x86 Drivers: - Add TRNG driver for StarFive SoC - Delete ux500/hash driver (subsumed by stm32/hash) - Add zlib support in qat - Add RSA support in aspeed" * tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits) crypto: x86/aria-avx - Do not use avx2 instructions crypto: aspeed - Fix modular aspeed-acry crypto: hisilicon/qm - fix coding style issues crypto: hisilicon/qm - update comments to match function crypto: hisilicon/qm - change function names crypto: hisilicon/qm - use min() instead of min_t() crypto: hisilicon/qm - remove some unused defines crypto: proc - Print fips status crypto: crypto4xx - Call dma_unmap_page when done crypto: octeontx2 - Fix objects shared between several modules crypto: nx - Fix sparse warnings crypto: ecc - Silence sparse warning tls: Pass rec instead of aead_req into tls_encrypt_done crypto: api - Remove completion function scaffolding tls: Remove completion function scaffolding tipc: Remove completion function scaffolding net: ipv6: Remove completion function scaffolding net: ipv4: Remove completion function scaffolding net: macsec: Remove completion function scaffolding dm: Remove completion function scaffolding ... |
||
|
Linus Torvalds
|
db77b8502a |
asm-generic: cleanups for 6.3
Only three minor changes: a cross-platform series from Mike Rapoport to
consolidate asm/agp.h between architectures, and a correctness change
for __generic_cmpxchg_local() from Matt Evans.
-----BEGIN PGP SIGNATURE-----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=3646
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"Only three minor changes: a cross-platform series from Mike Rapoport
to consolidate asm/agp.h between architectures, and a correctness
change for __generic_cmpxchg_local() from Matt Evans"
* tag 'asm-generic-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
char/agp: introduce asm-generic/agp.h
char/agp: consolidate {alloc,free}_gatt_pages()
locking/atomic: cmpxchg: Make __generic_cmpxchg_local compare against zero-extended 'old' value
|
||
Mike Rapoport
|
0e4f2c4567 |
char/agp: consolidate {alloc,free}_gatt_pages()
There is a copy of alloc_gatt_pages() and free_gatt_pages in several architectures in arch/$ARCH/include/asm/agp.h. All the copies do exactly the same: alias alloc_gatt_pages() to __get_free_pages(GFP_KERNEL) and alias free_gatt_pages() to free_pages(). Define alloc_gatt_pages() and free_gatt_pages() in drivers/char/agp/agp.h and drop per-architecture definitions. Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Julien Gomes
|
85b93bbd1c |
tpm: add vendor flag to command code validation
Some TPM 2.0 devices have support for additional commands which are not part of the TPM 2.0 specifications. These commands are identified with bit 29 of the 32 bits command codes. Contrarily to other fields of the TPMA_CC spec structure used to list available commands, the Vendor flag also has to be present in the command code itself (TPM_CC) when called. Add this flag to tpm_find_cc() mask to prevent blocking vendor command codes that can actually be supported by the underlying TPM device. Signed-off-by: Julien Gomes <julien@arista.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
Eddie James
|
1e2714bb83 |
tpm: Add reserved memory event log
Some platforms may desire to pass the event log up to Linux in the form of a reserved memory region. In particular, this is desirable for embedded systems or baseboard management controllers (BMCs) booting with U-Boot. IBM OpenBMC BMCs will be the first user. Add support for the reserved memory in the TPM core to find the region and map it. Signed-off-by: Eddie James <eajames@linux.ibm.com> [jarkko: removed spurious dev_info()'s from tpm_read_log_memory_region()] Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> [yang: return -ENOMEM when devm_memremap() fails] Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Eddie James
|
441b715272 |
tpm: Use managed allocation for bios event log
Since the bios event log is freed in the device release function, let devres handle the deallocation. This will allow other memory allocation/mapping functions to be used for the bios event log. Signed-off-by: Eddie James <eajames@linux.ibm.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
Uwe Kleine-König
|
40078327f6 |
tpm: tis_i2c: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Uwe Kleine-König
|
8f3fb73b8b |
tpm: tpm_i2c_nuvoton: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Uwe Kleine-König
|
d5ae2f4760 |
tpm: tpm_i2c_infineon: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Uwe Kleine-König
|
d787c95b56 |
tpm: tpm_i2c_atmel: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Uwe Kleine-König
|
376f88f44e |
tpm: st33zp24: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
Matthew Garrett
|
4d27328827 |
tpm_crb: Add support for CRB devices based on Pluton
Pluton is an integrated security processor present in some recent Ryzen parts. If it's enabled, it presents two devices - an MSFT0101 ACPI device that's broadly an implementation of a Command Response Buffer TPM2, and an MSFT0200 ACPI device whose functionality I haven't examined in detail yet. This patch only attempts to add support for the TPM device. There's a few things that need to be handled here. The first is that the TPM2 ACPI table uses a previously undefined start method identifier. The table format appears to include 16 bytes of startup data, which corresponds to one 64-bit address for a start message and one 64-bit address for a completion response. The second is that the ACPI tables on the Thinkpad Z13 I'm testing this on don't define any memory windows in _CRS (or, more accurately, there are two empty memory windows). This check doesn't seem strictly necessary, so I've skipped that. Finally, it seems like chip needs to be explicitly asked to transition into ready status on every command. Failing to do this means that if two commands are sent in succession without an idle/ready transition in between, everything will appear to work fine but the response is simply the original command. I'm working without any docs here, so I'm not sure if this is actually the required behaviour or if I'm missing something somewhere else, but doing this results in the chip working reliably. Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
Christophe JAILLET
|
befb28f267 |
ipmi: ipmb: Fix the MODULE_PARM_DESC associated to 'retry_time_ms'
'This should be 'retry_time_ms' instead of 'max_retries'.
Fixes:
|
||
Corey Minyard
|
00bb7e763e |
ipmi:ssif: Add a timer between request retries
The IPMI spec has a time (T6) specified between request retries. Add the handling for that. Reported by: Tony Camuso <tcamuso@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Corey Minyard <cminyard@mvista.com> |
||
|
Corey Minyard
|
9e8b89926f |
ipmi:ssif: Remove rtc_us_timer
It was cruft left over from older handling of run to completion. Cc: stable@vger.kernel.org Signed-off-by: Corey Minyard <cminyard@mvista.com> |
||
|
Corey Minyard
|
8230831c43 |
ipmi_ssif: Rename idle state and check
Rename the SSIF_IDLE() to IS_SSIF_IDLE(), since that is more clear, and rename SSIF_NORMAL to SSIF_IDLE, since that's more accurate. Cc: stable@vger.kernel.org Signed-off-by: Corey Minyard <cminyard@mvista.com> |
||
|
Corey Minyard
|
95767ed78a |
ipmi:ssif: resend_msg() cannot fail
The resend_msg() function cannot fail, but there was error handling around using it. Rework the handling of the error, and fix the out of retries debug reporting that was wrong around this, too. Cc: stable@vger.kernel.org Signed-off-by: Corey Minyard <cminyard@mvista.com> |
||
Suren Baghdasaryan
|
1c71222e5f |
mm: replace vma->vm_flags direct modifications with modifier calls
Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Herbert Xu
|
c7410b425d |
hwrng: starfive - Enable compile testing
Enable compile testing for jh7110. Also remove the dependency on HW_RANDOM. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Jia Jie Ho <jiajie.ho@starfivetech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Jia Jie Ho
|
c388f458bc |
hwrng: starfive - Add TRNG driver for StarFive SoC
This adds driver support for the hardware random number generator in Starfive SoCs and adds StarFive TRNG entry to MAINTAINERS. Co-developed-by: Jenny Zhang <jenny.zhang@starfivetech.com> Signed-off-by: Jenny Zhang <jenny.zhang@starfivetech.com> Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Bo Liu
|
c7109c72ab |
virtio_console: Use strscpy() to instead of strncpy()
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL-terminated strings. Signed-off-by: Bo Liu <liubo03@inspur.com> Link: https://lore.kernel.org/r/20230118012944.2436-1-liubo03@inspur.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Xiongfeng Wang
|
ce4273d89c |
applicom: Fix PCI device refcount leak in applicom_init()
As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.
If we break the loop in applicom_init() with 'dev' not NULL, we need to
call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak.
Fixes:
|
||
Duoming Zhou
|
70fae37a09 |
Revert "char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol"
This reverts commit |
||
Randy Dunlap
|
af35dbad4a |
pcmcia: synclink_cs: remove kernel-doc notation
Remove all kernel-doc "/**" markers; just use "/*" comments since these are not in kernel-doc format. This eliminates 11 kernel-doc warnings: drivers/char/pcmcia/synclink_cs.c:487: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * line discipline callback wrappers drivers/char/pcmcia/synclink_cs.c:3861: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) drivers/char/pcmcia/synclink_cs.c:3914: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by generic HDLC layer to send frame drivers/char/pcmcia/synclink_cs.c:3959: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by network layer when interface enabled drivers/char/pcmcia/synclink_cs.c:4022: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by network layer when interface is disabled drivers/char/pcmcia/synclink_cs.c:4053: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by network layer to process IOCTL call to network device drivers/char/pcmcia/synclink_cs.c:4156: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by network layer when transmit timeout is detected drivers/char/pcmcia/synclink_cs.c:4179: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by device driver when transmit completes drivers/char/pcmcia/synclink_cs.c:4191: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by device driver when frame received drivers/char/pcmcia/synclink_cs.c:4231: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by device driver when adding device instance drivers/char/pcmcia/synclink_cs.c:4279: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * called by device driver when removing device instance Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20230114034646.1535-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Ilpo Järvinen
|
5701cb8bf5 |
tty: Call ->dtr_rts() parameter active consistently
Convert various parameter names for ->dtr_rts() and related functions from onoff, on, and raise to active. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230117090358.4796-12-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ilpo Järvinen
|
5d42039907 |
tty: Convert ->dtr_rts() to take bool argument
Convert the raise/on parameter in ->dtr_rts() to bool through the callchain. The parameter is used like bool. In USB serial, there remains a few implicit bool -> larger type conversions because some devices use u8 in their control messages. In moxa_tiocmget(), dtr variable was reused for line status which requires int so use a separate variable for status. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230117090358.4796-8-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ilpo Järvinen
|
b300fb26c5 |
tty: Convert ->carrier_raised() and callchains to bool
Return boolean from ->carrier_raised() instead of 0 and 1. Make the return type change also to tty_port_carrier_raised() that makes the ->carrier_raised() call (+ cd variable in moxa into which its return value is stored). Also cleans up a few unnecessary constructs related to this change: return xx ? 1 : 0; -> return xx; if (xx) return 1; return 0; -> return xx; Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230117090358.4796-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ilpo Järvinen
|
515be7baed |
tty: Cleanup tty_port_set_initialized() bool parameter
Make callers pass true/false consistently for bool val. Reviewed-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230117090358.4796-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
David Hildenbrand
|
fc4f4be9b5 |
mm/nommu: factor out check for NOMMU shared mappings into is_nommu_shared_mapping()
Patch series "mm/nommu: don't use VM_MAYSHARE for MAP_PRIVATE mappings". Trying to reduce the confusion around VM_SHARED and VM_MAYSHARE first requires !CONFIG_MMU to stop using VM_MAYSHARE for MAP_PRIVATE mappings. CONFIG_MMU only sets VM_MAYSHARE for MAP_SHARED mappings. This paves the way for further VM_MAYSHARE and VM_SHARED cleanups: for example, renaming VM_MAYSHARED to VM_MAP_SHARED to make it cleaner what is actually means. Let's first get the weird case out of the way and not use VM_MAYSHARE in MAP_PRIVATE mappings, using a new VM_MAYOVERLAY flag instead. This patch (of 3): We want to stop using VM_MAYSHARE in private mappings to pave the way for clarifying the semantics of VM_MAYSHARE vs. VM_SHARED and reduce the confusion. While CONFIG_MMU uses VM_MAYSHARE to represent MAP_SHARED, !CONFIG_MMU also sets VM_MAYSHARE for selected R/O private file mappings that are an effective overlay of a file mapping. Let's factor out all relevant VM_MAYSHARE checks in !CONFIG_MMU code into is_nommu_shared_mapping() first. Note that whenever VM_SHARED is set, VM_MAYSHARE must be set as well (unless there is a serious BUG). So there is not need to test for VM_SHARED manually. No functional change intended. Link: https://lkml.kernel.org/r/20230102160856.500584-1-david@redhat.com Link: https://lkml.kernel.org/r/20230102160856.500584-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
bad8c4a850 |
xen: branch for v6.2-rc4
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCY76ohgAKCRCAXGG7T9hj vo8fAP0XJ94B7asqcN4W3EyeyfqxUf1eZvmWRhrbKqpLnmHLaQEA/uJBkXL49Zj7 TTcbxR1coJ/hPwhtmONU4TNtCZ+RXw0= =2Ib5 -----END PGP SIGNATURE----- Merge tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - two cleanup patches - a fix of a memory leak in the Xen pvfront driver - a fix of a locking issue in the Xen hypervisor console driver * tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvcalls: free active map buffer on pvcalls_front_free_map hvc/xen: lock console list traversal x86/xen: Remove the unused function p2m_index() xen: make remove callback of xen driver void returned |
||
Jason A. Donenfeld
|
1382999aa0 |
tpm: Allow system suspend to continue when TPM suspend fails
TPM 1 is sometimes broken across system suspends, due to races or
locking issues or something else that haven't been diagnosed or fixed
yet, most likely having to do with concurrent reads from the TPM's
hardware random number generator driver. These issues prevent the system
from actually suspending, with errors like:
tpm tpm0: A TPM error (28) occurred continue selftest
...
tpm tpm0: A TPM error (28) occurred attempting get random
...
tpm tpm0: Error (28) sending savestate before suspend
tpm_tis 00:08: PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28
tpm_tis 00:08: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 28
tpm_tis 00:08: PM: failed to suspend: error 28
PM: Some devices failed to suspend, or early wake event detected
This issue was partially fixed by
|
||
|
Jason A. Donenfeld
|
6bb20c152b |
random: do not include <asm/archrandom.h> from random.h
The <asm/archrandom.h> header is a random.c private detail, not something to be called by other code. As such, don't make it automatically available by way of random.h. Cc: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
|
Linus Torvalds
|
71a7507afb |
Driver Core changes for 6.2-rc1
Here is the set of driver core and kernfs changes for 6.2-rc1. The "big" change in here is the addition of a new macro, container_of_const() that will preserve the "const-ness" of a pointer passed into it. The "problem" of the current container_of() macro is that if you pass in a "const *", out of it can comes a non-const pointer unless you specifically ask for it. For many usages, we want to preserve the "const" attribute by using the same call. For a specific example, this series changes the kobj_to_dev() macro to use it, allowing it to be used no matter what the const value is. This prevents every subsystem from having to declare 2 different individual macros (i.e. kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce the const value at build time, which having 2 macros would not do either. The driver for all of this have been discussions with the Rust kernel developers as to how to properly mark driver core, and kobject, objects as being "non-mutable". The changes to the kobject and driver core in this pull request are the result of that, as there are lots of paths where kobjects and device pointers are not modified at all, so marking them as "const" allows the compiler to enforce this. So, a nice side affect of the Rust development effort has been already to clean up the driver core code to be more obvious about object rules. All of this has been bike-shedded in quite a lot of detail on lkml with different names and implementations resulting in the tiny version we have in here, much better than my original proposal. Lots of subsystem maintainers have acked the changes as well. Other than this change, included in here are smaller stuff like: - kernfs fixes and updates to handle lock contention better - vmlinux.lds.h fixes and updates - sysfs and debugfs documentation updates - device property updates All of these have been in the linux-next tree for quite a while with no problems, OTHER than some merge issues with other trees that should be obvious when you hit them (block tree deletes a driver that this tree modifies, iommufd tree modifies code that this tree also touches). If there are merge problems with these trees, please let me know. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wz3A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yks0ACeKYUlVgCsER8eYW+x18szFa2QTXgAn2h/VhZe 1Fp53boFaQkGBjl8mGF8 =v+FB -----END PGP SIGNATURE----- Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core and kernfs changes for 6.2-rc1. The "big" change in here is the addition of a new macro, container_of_const() that will preserve the "const-ness" of a pointer passed into it. The "problem" of the current container_of() macro is that if you pass in a "const *", out of it can comes a non-const pointer unless you specifically ask for it. For many usages, we want to preserve the "const" attribute by using the same call. For a specific example, this series changes the kobj_to_dev() macro to use it, allowing it to be used no matter what the const value is. This prevents every subsystem from having to declare 2 different individual macros (i.e. kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce the const value at build time, which having 2 macros would not do either. The driver for all of this have been discussions with the Rust kernel developers as to how to properly mark driver core, and kobject, objects as being "non-mutable". The changes to the kobject and driver core in this pull request are the result of that, as there are lots of paths where kobjects and device pointers are not modified at all, so marking them as "const" allows the compiler to enforce this. So, a nice side affect of the Rust development effort has been already to clean up the driver core code to be more obvious about object rules. All of this has been bike-shedded in quite a lot of detail on lkml with different names and implementations resulting in the tiny version we have in here, much better than my original proposal. Lots of subsystem maintainers have acked the changes as well. Other than this change, included in here are smaller stuff like: - kernfs fixes and updates to handle lock contention better - vmlinux.lds.h fixes and updates - sysfs and debugfs documentation updates - device property updates All of these have been in the linux-next tree for quite a while with no problems" * tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits) device property: Fix documentation for fwnode_get_next_parent() firmware_loader: fix up to_fw_sysfs() to preserve const usb.h: take advantage of container_of_const() device.h: move kobj_to_dev() to use container_of_const() container_of: add container_of_const() that preserves const-ness of the pointer driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion. driver core: fix up missed scsi/cxlflash class.devnode() conversion. driver core: fix up some missing class.devnode() conversions. driver core: make struct class.devnode() take a const * driver core: make struct class.dev_uevent() take a const * cacheinfo: Remove of_node_put() for fw_token device property: Add a blank line in Kconfig of tests device property: Rename goto label to be more precise device property: Move PROPERTY_ENTRY_BOOL() a bit down device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*() kernfs: fix all kernel-doc warnings and multiple typos driver core: pass a const * into of_device_uevent() kobject: kset_uevent_ops: make name() callback take a const * kobject: kset_uevent_ops: make filter() callback take a const * kobject: make kobject_namespace take a const * ... |
||
|
Linus Torvalds
|
ba54ff1fb6 |
Char/Misc driver changes for 6.2-rc1
Here is the large set of char/misc and other driver subsystem changes for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of new driver development and minor fixes. Highlights include: - fastrpc driver updates - iio new drivers and updates - habanalabs driver updates for new hardware and features - slimbus driver updates - speakup module parameters added to aid in boot time configuration - i2c probe_new conversions for lots of different drivers - other small driver fixes and additions One semi-interesting change in here is the increase of the number of misc dynamic minors available to 1048448 to handle new huge-cpu systems. All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wrdw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykSDgCdHjUHS62/UnKdB9rLtyAOFxS/6DgAn2X4Unf8 RN8Mn2mUIiBzyu5p+Zc7 =tK3S -----END PGP SIGNATURE----- Merge tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc and other driver subsystem changes for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of new driver development and minor fixes. Highlights include: - fastrpc driver updates - iio new drivers and updates - habanalabs driver updates for new hardware and features - slimbus driver updates - speakup module parameters added to aid in boot time configuration - i2c probe_new conversions for lots of different drivers - other small driver fixes and additions One semi-interesting change in here is the increase of the number of misc dynamic minors available to 1048448 to handle new huge-cpu systems. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits) extcon: usbc-tusb320: Convert to i2c's .probe_new() extcon: rt8973: Convert to i2c's .probe_new() extcon: fsa9480: Convert to i2c's .probe_new() extcon: max77843: Replace irqchip mask_invert with unmask_base chardev: fix error handling in cdev_device_add() mcb: mcb-parse: fix error handing in chameleon_parse_gdd() drivers: mcb: fix resource leak in mcb_probe() coresight: etm4x: fix repeated words in comments coresight: cti: Fix null pointer error on CTI init before ETM coresight: trbe: remove cpuhp instance node before remove cpuhp state counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update misc: fastrpc: Add dma_mask to fastrpc_channel_ctx misc: fastrpc: Add mmap request assigning for static PD pool misc: fastrpc: Safekeep mmaps on interrupted invoke misc: fastrpc: Add support for audiopd misc: fastrpc: Rework fastrpc_req_munmap misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail misc: fastrpc: Add fastrpc_remote_heap_alloc misc: fastrpc: Add reserved mem support misc: fastrpc: Rename audio protection domain to root ... |
||
Dawei Li
|
7cffcade57 |
xen: make remove callback of xen driver void returned
Since commit
|
||
|
Linus Torvalds
|
64e7003c6b |
This update includes the following changes:
API: - Optimise away self-test overhead when they are disabled. - Support symmetric encryption via keyring keys in af_alg. - Flip hwrng default_quality, the default is now maximum entropy. Algorithms: - Add library version of aesgcm. - CFI fixes for assembly code. - Add arm/arm64 accelerated versions of sm3/sm4. Drivers: - Remove assumption on arm64 that kmalloc is DMA-aligned. - Fix selftest failures in rockchip. - Add support for RK3328/RK3399 in rockchip. - Add deflate support in qat. - Merge ux500 into stm32. - Add support for TEE for PCI ID 0x14CA in ccp. - Add mt7986 support in mtk. - Add MaxLinear platform support in inside-secure. - Add NPCM8XX support in npcm. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmOZhNQACgkQxycdCkmx i6edOQ/+IHYe2Z+fLsMGs0qgTVaEV33O0crTRl/PMkfBJai57grz6x/G9QrkwGHS 084u4RmwhVrE7Z/pxvey48m0lHMw3H/ElLTRl5LV1zE2OtGgr4VV63wtqthu1QS1 KblVnjb52DhFhvF1O1IrK9lxyX0lByOiARFVdyZR6+Rb66Xfq8rqk5t8U8mmTUFz ds9S2Un4HajgtjNEyI78DOX8o4wVST8tltQs0eVii6T9AeXgSgX37ytD7Xtg/zrz /p61KFgKBQkRT7EEGD6xgNrND0vNAp2w98ZTTRXTZI8+Y0aTUcTYya7cXOLBt9bQ rA7z9sNKvmwJijTMV6O9eqRGcYfzc2G4qfMhlQqj/P2pjLnEZXdvFNHTTbclR76h 2UFlZXPDQVQukvnNNnB6bmIvv6DsM+jmGH0pK5BnBJXnD5SOZh1RqjJxw0Kj6QCM VxpKDvfStux2Guh6mz1lJna/S44qKy/sVYkWUawcmE4RF2+GfNayM1GUpEUofndE vz1yZdgLPETSh5QzKrjFkUAnqo/AsAdc5Qxroz9DRz1BCC0GCuIxjUG8ScTWgcth R/reQDczBckCNpPxrWPHHYoVXnAMwEFySfcjZyuCoMO6t6qVUvcjRShCyKwO/JPl 9YREdRmq0swwIB9cFIrEoWrzc3wjjBtsltDFlkKsa9c92LXoW+g= =OpWt -----END PGP SIGNATURE----- Merge tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Optimise away self-test overhead when they are disabled - Support symmetric encryption via keyring keys in af_alg - Flip hwrng default_quality, the default is now maximum entropy Algorithms: - Add library version of aesgcm - CFI fixes for assembly code - Add arm/arm64 accelerated versions of sm3/sm4 Drivers: - Remove assumption on arm64 that kmalloc is DMA-aligned - Fix selftest failures in rockchip - Add support for RK3328/RK3399 in rockchip - Add deflate support in qat - Merge ux500 into stm32 - Add support for TEE for PCI ID 0x14CA in ccp - Add mt7986 support in mtk - Add MaxLinear platform support in inside-secure - Add NPCM8XX support in npcm" * tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits) crypto: ux500/cryp - delete driver crypto: stm32/cryp - enable for use with Ux500 crypto: stm32 - enable drivers to be used on Ux500 dt-bindings: crypto: Let STM32 define Ux500 CRYP hwrng: geode - Fix PCI device refcount leak hwrng: amd - Fix PCI device refcount leak crypto: qce - Set DMA alignment explicitly crypto: octeontx2 - Set DMA alignment explicitly crypto: octeontx - Set DMA alignment explicitly crypto: keembay - Set DMA alignment explicitly crypto: safexcel - Set DMA alignment explicitly crypto: hisilicon/hpre - Set DMA alignment explicitly crypto: chelsio - Set DMA alignment explicitly crypto: ccree - Set DMA alignment explicitly crypto: ccp - Set DMA alignment explicitly crypto: cavium - Set DMA alignment explicitly crypto: img-hash - Fix variable dereferenced before check 'hdev->req' crypto: arm64/ghash-ce - use frame_push/pop macros consistently crypto: arm64/crct10dif - use frame_push/pop macros consistently crypto: arm64/aes-modes - use frame_push/pop macros consistently ... |
||
|
Linus Torvalds
|
c7020e1b34 |
pci-v6.2-changes
-----BEGIN PGP SIGNATURE-----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=KULr
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Squash portdrv_{core,pci}.c into portdrv.c to ease maintenance and
make more things static.
- Make portdrv bind to Switch Ports that have AER. Previously, if
these Ports lacked MSI/MSI-X, portdrv failed to bind, which meant
the Ports couldn't be suspended to low-power states. AER on these
Ports doesn't use interrupts, and the AER driver doesn't need to
claim them.
- Assign PCI domain IDs using ida_alloc(), which makes host bridge
add/remove work better.
Resource management:
- To work better with recent BIOSes that use EfiMemoryMappedIO for
PCI host bridge apertures, remove those regions from the E820 map
(E820 entries normally prevent us from allocating BARs). In v5.19,
we added some quirks to disable E820 checking, but that's not very
maintainable. EfiMemoryMappedIO means the OS needs to map the
region for use by EFI runtime services; it shouldn't prevent OS
from using it.
PCIe native device hotplug:
- Build pciehp by default if USB4 is enabled, since Thunderbolt/USB4
PCIe tunneling depends on native PCIe hotplug.
- Enable Command Completed Interrupt only if supported to avoid user
confusion from lspci output that says this is enabled but not
supported.
- Prevent pciehp from binding to Switch Upstream Ports; this happened
because of interaction with acpiphp and caused devices below the
Upstream Port to disappear.
Power management:
- Convert AGP drivers to generic power management. We hope to remove
legacy power management from the PCI core eventually.
Virtualization:
- Fix pci_device_is_present(), which previously always returned
"false" for VFs, causing virtio hangs when unbinding the driver.
Miscellaneous:
- Convert drivers to gpiod API to prepare for dropping some legacy
code.
- Fix DOE fencepost error for the maximum data object length.
Baikal-T1 PCIe controller driver:
- Add driver and DT bindings.
Broadcom STB PCIe controller driver:
- Enable Multi-MSI.
- Delay 100ms after PERST# deassert to allow power and clocks to
stabilize.
- Configure Read Completion Boundary to 64 bytes.
Freescale i.MX6 PCIe controller driver:
- Initialize PHY before deasserting core reset to fix a regression in
v6.0 on boards where the PHY provides the reference.
- Fix imx6sx and imx8mq clock names in DT schema.
Intel VMD host bridge driver:
- Fix Secondary Bus Reset on VMD bridges, which allows reset of NVMe
SSDs in VT-d pass-through scenarios.
- Disable MSI remapping, which gets re-enabled by firmware during
suspend/resume.
MediaTek PCIe Gen3 controller driver:
- Add MT7986 and MT8195 support.
Qualcomm PCIe controller driver:
- Add SC8280XP/SA8540P basic interconnect support.
Rockchip DesignWare PCIe controller driver:
- Base DT schema on common Synopsys schema.
Synopsys DesignWare PCIe core:
- Collect DT items shared between Root Port and Endpoint (PERST GPIO,
PHY info, clocks, resets, link speed, number of lanes, number of
iATU windows, interrupt info, etc) to snps,dw-pcie-common.yaml.
- Add dma-ranges support for Root Ports and Endpoints.
- Consolidate DT resource retrieval for "dbi", "dbi2", "atu", etc. to
reduce code duplication.
- Add generic names for clocks and resets to encourage more
consistent naming across drivers using DesignWare IP.
- Stop advertising PTM Responder role for Endpoints, which aren't
allowed to be responders.
TI J721E PCIe driver:
- Add j721s2 host mode ID to DT schema.
- Add interrupt properties to DT schema.
Toshiba Visconti PCIe controller driver:
- Fix interrupts array max constraints in DT schema"
* tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (95 commits)
x86/PCI: Use pr_info() when possible
x86/PCI: Fix log message typo
x86/PCI: Tidy E820 removal messages
PCI: Skip allocate_resource() if too little space available
efi/x86: Remove EfiMemoryMappedIO from E820 map
PCI/portdrv: Allow AER service only for Root Ports & RCECs
PCI: xilinx-nwl: Fix coding style violations
PCI: mvebu: Switch to using gpiod API
PCI: pciehp: Enable Command Completed Interrupt only if supported
PCI: aardvark: Switch to using devm_gpiod_get_optional()
dt-bindings: PCI: mediatek-gen3: add support for mt7986
dt-bindings: PCI: mediatek-gen3: add SoC based clock config
dt-bindings: PCI: qcom: Allow 'dma-coherent' property
PCI: mt7621: Add sentinel to quirks table
PCI: vmd: Fix secondary bus reset for Intel bridges
PCI: endpoint: pci-epf-vntb: Fix sparse ntb->reg build warning
PCI: endpoint: pci-epf-vntb: Fix sparse build warning for epf_db
PCI: endpoint: pci-epf-vntb: Replace hardcoded 4 with sizeof(u32)
PCI: endpoint: pci-epf-vntb: Remove unused epf_db_phy struct member
PCI: endpoint: pci-epf-vntb: Fix call pci_epc_mem_free_addr() in error path
...
|
||
|
Linus Torvalds
|
90b12f423d |
Small fixes, a new SSIF i2c BMC-side interface
This includes a number of small fixes, as usual. It also includes a new driver for doing the i2c (SSIF) interface BMC-side, pretty much completing the BMC side interfaces. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE/Q1c5nzg9ZpmiCaGYfOMkJGb/4EFAmOYieoACgkQYfOMkJGb /4EF6A//UX1SL+OT+NOvFYxr6etcKoY6VGZDlEUbUbUAYFE/vv/aFP2aXr+eHf/o Y+hx3WLE5kveoxVcGfkJMRVYiHbC/4d+Z4CLd1PzXx6Tjp20Abpr8uGCZIyy0263 /gYl+JPmSRXslA46mPImMlTzL/vzsHjoOHVpLCVcv8iDbXKhvqlNEJ2Y8BbNy299 vNkix6MVDmTCD+PR5LE10myL0X53suHJoAN6CbjmRgIgxFb/tfddtFRIjqb/W8Dk JssgYGd+xFHWV/65xnOGbGDWuciBIQSkFL7fWyZpp0OooPJJRL/Hi/l3VVMC1GTA y38E+0as+OzQcaHKcG9hnzFWhVtewJYFHL2TZrAv3IbFWjiJwDq7jguraOl5uTAB vzIt0ML34oWF4PR/ZYva3aZID5xmNKYMRVHp9cxzNmUKd4XcHfwzKD2C9eVVG5W9 qQ+7a+L7mC6PwOCE5t+P/Plh0lC9V8eDAVTf4pfXH/vp0o5oreMaJtDKGnCqvyZR raU/rmyS8TNYv8iZMItGL8U1h8trYIMVA1SuEzQICpPKd7yITcKuSPIYXLThGUx8 4XWu8iMfaPcHzeCNtOwrRxXjQ8AeRTGPPkKf25pvvM9ETODyUIUsuMYSE9kNlQjP zFCyDbcMPxVx+WD6YptukbY8pNftCiT8wrFbriV8BMDDGMDq5HM= =HTb4 -----END PGP SIGNATURE----- Merge tag 'for-linus-6.2-1' of https://github.com/cminyard/linux-ipmi Pull IPMI updates from Corey Minyard: "This includes a number of small fixes, as usual. It also includes a new driver for doing the i2c (SSIF) interface BMC-side, pretty much completing the BMC side interfaces" * tag 'for-linus-6.2-1' of https://github.com/cminyard/linux-ipmi: ipmi/watchdog: use strscpy() to instead of strncpy() ipmi: ssif_bmc: Convert to i2c's .probe_new() ipmi: fix use after free in _ipmi_destroy_user() ipmi/watchdog: Include <linux/kstrtox.h> when appropriate ipmi:ssif: Increase the message retry time ipmi: Fix some kernel-doc warnings ipmi: ssif_bmc: Use EPOLLIN instead of POLLIN ipmi: fix msg stack when IPMI is disconnected ipmi: fix memleak when unload ipmi driver ipmi: fix long wait in unload when IPMI disconnect ipmi: kcs: Poll OBF briefly to reduce OBE latency bindings: ipmi: Add binding for SSIF BMC driver ipmi: ssif_bmc: Add SSIF BMC driver |
||
|
Linus Torvalds
|
75f4d9af8b |
iov_iter work; most of that is about getting rid of
direction misannotations and (hopefully) preventing
more of the same for the future.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ
65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N
MzwiRTeqnGDxTTF7mgd//IB6hoatAA==
=bcvF
-----END PGP SIGNATURE-----
Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
|
||
|
Linus Torvalds
|
268325bda5 |
Random number generator updates for Linux 6.2-rc1.
-----BEGIN PGP SIGNATURE-----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=QRhK
-----END PGP SIGNATURE-----
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
|
||
|
Linus Torvalds
|
456ed864fd |
ACPI updates for 6.2-rc1
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
* Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki).
* Add support for loong_arch-specific APICs in MADT (Huacai Chen).
* Add support for fixed PCIe wake event (Huacai Chen).
* Add EBDA pointer sanity checks (Vit Kabele).
* Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele).
* Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan).
* Add a couple of new UUIDs to the known UUID list (Bob Moore).
* Add support for FFH Opregion special context data (Sudeep Holla).
* Improve warning message for "invalid ACPI name" (Bob Moore).
* Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield).
* Prepare IORT support for revision E.e (Robin Murphy).
* Finish support for the CDAT table (Bob Moore).
* Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki).
* Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao).
* Update the version of the ACPICA code in the kernel (Bob Moore).
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen).
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla).
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong,
Colin Ian King, Sudeep Holla).
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi).
- Add some mew ACPI backlight handling quirks and update some existing
ones (Hans de Goede).
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede).
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König).
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel).
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu).
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede).
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf).
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang ShaoBo).
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen).
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo).
- Fix the PCC mailbox handling error code path (Huisong Li).
- Avoid using PCC Opregions if there is no platform interrupt allocated
for this purpose (Huisong Li).
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen).
- Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng
Wang).
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang).
- Do not disable PNP devices on suspend when they cannot be re-enabled
on resume (Hans de Goede).
- Clean up the ACPI thermal driver a bit (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=GVzp
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and PNP updates from Rafael Wysocki:
"These include new code (for instance, support for the FFH address
space type and support for new firmware data structures in ACPICA),
some new quirks (mostly related to backlight handling and I2C
enumeration), a number of fixes and a fair amount of cleanups all
over.
Specifics:
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
- Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki)
- Add support for loong_arch-specific APICs in MADT (Huacai Chen)
- Add support for fixed PCIe wake event (Huacai Chen)
- Add EBDA pointer sanity checks (Vit Kabele)
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele)
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan)
- Add a couple of new UUIDs to the known UUID list (Bob Moore)
- Add support for FFH Opregion special context data (Sudeep
Holla)
- Improve warning message for "invalid ACPI name" (Bob Moore)
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield)
- Prepare IORT support for revision E.e (Robin Murphy)
- Finish support for the CDAT table (Bob Moore)
- Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki)
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao)
- Update the version of the ACPICA code in the kernel (Bob Moore)
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti)
- Change the return type of the ACPI driver remove callback to void
and update its users accordingly (Dawei Li)
- Add general support for FFH address space type and implement the
low- level part of it for ARM64 (Sudeep Holla)
- Fix stale comments in the ACPI tables parsing code and make it
print more messages related to MADT (Hanjun Guo, Huacai Chen)
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe
JAILLET, Xu Panda)
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen)
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla)
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li
Zhong, Colin Ian King, Sudeep Holla)
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi)
- Add some mew ACPI backlight handling quirks and update some
existing ones (Hans de Goede)
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede)
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König)
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel)
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay
Lu)
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede)
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf)
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang
ShaoBo)
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen)
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo)
- Fix the PCC mailbox handling error code path (Huisong Li)
- Avoid using PCC Opregions if there is no platform interrupt
allocated for this purpose (Huisong Li)
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen)
- Fix some kernel-doc issues in the ACPI GSI processing code
(Xiongfeng Wang)
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang)
- Do not disable PNP devices on suspend when they cannot be
re-enabled on resume (Hans de Goede)
- Clean up the ACPI thermal driver a bit (Rafael Wysocki)"
* tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
ACPI: APEI: EINJ: Refactor available_error_type_show()
ACPI: APEI: EINJ: Fix formatting errors
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
ACPI: processor: perflib: Rearrange unregistration routine
ACPI: processor: perflib: Drop redundant parentheses
ACPI: processor: perflib: Adjust white space
ACPI: processor: idle: Drop unnecessary statements and parens
ACPI: thermal: Adjust critical.flags.valid check
ACPI: fan: Convert to use sysfs_emit_at() API
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPI: battery: Call power_supply_changed() when adding hooks
ACPI: use sysfs_emit() instead of scnprintf()
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
ACPI: APEI: Remove a useless include
PNP: Do not disable devices on suspend when they cannot be re-enabled on resume
ACPI: processor: Silence missing prototype warnings
ACPI: processor_idle: Silence missing prototype warnings
ACPI: PM: Silence missing prototype warning
...
|
||
|
Linus Torvalds
|
0a1d4434db |
Updates for timers, timekeeping and drivers:
- Core:
- The timer_shutdown[_sync]() infrastructure:
Tearing down timers can be tedious when there are circular
dependencies to other things which need to be torn down. A prime
example is timer and workqueue where the timer schedules work and the
work arms the timer.
What needs to prevented is that pending work which is drained via
destroy_workqueue() does not rearm the previously shutdown
timer. Nothing in that shutdown sequence relies on the timer being
functional.
The conclusion was that the semantics of timer_shutdown_sync() should
be:
- timer is not enqueued
- timer callback is not running
- timer cannot be rearmed
Preventing the rearming of shutdown timers is done by discarding rearm
attempts silently. A warning for the case that a rearm attempt of a
shutdown timer is detected would not be really helpful because it's
entirely unclear how it should be acted upon. The only way to address
such a case is to add 'if (in_shutdown)' conditionals all over the
place. This is error prone and in most cases of teardown not required
all.
- The real fix for the bluetooth HCI teardown based on
timer_shutdown_sync().
A larger scale conversion to timer_shutdown_sync() is work in
progress.
- Consolidation of VDSO time namespace helper functions
- Small fixes for timer and timerqueue
- Drivers:
- Prevent integer overflow on the XGene-1 TVAL register which causes
an never ending interrupt storm.
- The usual set of new device tree bindings
- Small fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=JlDe
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and drivers:
Core:
- The timer_shutdown[_sync]() infrastructure:
Tearing down timers can be tedious when there are circular
dependencies to other things which need to be torn down. A prime
example is timer and workqueue where the timer schedules work and
the work arms the timer.
What needs to prevented is that pending work which is drained via
destroy_workqueue() does not rearm the previously shutdown timer.
Nothing in that shutdown sequence relies on the timer being
functional.
The conclusion was that the semantics of timer_shutdown_sync()
should be:
- timer is not enqueued
- timer callback is not running
- timer cannot be rearmed
Preventing the rearming of shutdown timers is done by discarding
rearm attempts silently.
A warning for the case that a rearm attempt of a shutdown timer is
detected would not be really helpful because it's entirely unclear
how it should be acted upon. The only way to address such a case is
to add 'if (in_shutdown)' conditionals all over the place. This is
error prone and in most cases of teardown not required all.
- The real fix for the bluetooth HCI teardown based on
timer_shutdown_sync().
A larger scale conversion to timer_shutdown_sync() is work in
progress.
- Consolidation of VDSO time namespace helper functions
- Small fixes for timer and timerqueue
Drivers:
- Prevent integer overflow on the XGene-1 TVAL register which causes
an never ending interrupt storm.
- The usual set of new device tree bindings
- Small fixes and improvements all over the place"
* tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
dt-bindings: timer: renesas,cmt: Add r8a779g0 CMT support
dt-bindings: timer: renesas,tmu: Add r8a779g0 support
clocksource/drivers/arm_arch_timer: Use kstrtobool() instead of strtobool()
clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
clocksource/drivers/timer-ti-dm: Clear settings on probe and free
clocksource/drivers/timer-ti-dm: Make timer_get_irq static
clocksource/drivers/timer-ti-dm: Fix warning for omap_timer_match
clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error
clocksource/drivers/timer-npcm7xx: Enable timer 1 clock before use
dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks
dt-bindings: timer: rockchip: Add rockchip,rk3128-timer
clockevents: Repair kernel-doc for clockevent_delta2ns()
clocksource/drivers/ingenic-ost: Define pm functions properly in platform_driver struct
clocksource/drivers/sh_cmt: Access registers according to spec
vdso/timens: Refactor copy-pasted find_timens_vvar_page() helper into one copy
Bluetooth: hci_qca: Fix the teardown problem for real
timers: Update the documentation to reflect on the new timer_shutdown() API
timers: Provide timer_shutdown[_sync]()
timers: Add shutdown mechanism to the internal functions
timers: Split [try_to_]del_timer[_sync]() to prepare for shutdown mode
...
|
||
Rafael J. Wysocki
|
45494d77f2 |
Merge branches 'acpi-scan', 'acpi-bus', 'acpi-tables' and 'acpi-sysfs'
Merge ACPI changes related to device enumeration, device object managenet, operation region handling, table parsing and sysfs interface: - Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device enumeration code (Giulio Benetti). - Change the return type of the ACPI driver remove callback to void and update its users accordingly (Dawei Li). - Add general support for FFH address space type and implement the low- level part of it for ARM64 (Sudeep Holla). - Fix stale comments in the ACPI tables parsing code and make it print more messages related to MADT (Hanjun Guo, Huacai Chen). - Replace invocations of generic library functions with more kernel- specific counterparts in the ACPI sysfs interface (Christophe JAILLET, Xu Panda). * acpi-scan: ACPI: scan: substitute empty_zero_page with helper ZERO_PAGE(0) * acpi-bus: ACPI: FFH: Silence missing prototype warnings ACPI: make remove callback of ACPI driver void ACPI: bus: Fix the _OSC capability check for FFH OpRegion arm64: Add architecture specific ACPI FFH Opregion callbacks ACPI: Implement a generic FFH Opregion handler * acpi-tables: ACPI: tables: Fix the stale comments for acpi_locate_initial_tables() ACPI: tables: Print CORE_PIC information when MADT is parsed * acpi-sysfs: ACPI: sysfs: use sysfs_emit() to instead of scnprintf() ACPI: sysfs: Use kstrtobool() instead of strtobool() |